Ejemplos de add_command_file_page en Python

Ejemplo n.º 1

Archivo: modal_analysis.py Proyecto: takeru7584/salome_work

def create_wizard(mod):
    """Create the modal analysis wizard"""
    #    wiz = WC.Wizard(u"Modal analysis", mod)
    #    wiz = WC.Wizard(u"固有値解析", mod)
    wiz = WC.Wizard(
        qt.QApplication.translate("WizardModalAnalysis", "Modal analysis",
                                  None, qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.PlaneStress,
        WC.PlaneStrain,
        WC.AxisSymmetric,
    ])
    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())
    WC.add_mesh_page(wiz, mod, exp_store)
    #    title = u"Young's modulus, density and Poisson ratio definitions"
    #    title = u"ヤング係数、密度とポアソン比の設定"
    #qt.QApplication.translate("WizardModalAnalysis", "", None, qt.QApplication.UnicodeUTF8)
    title = qt.QApplication.translate(
        "WizardModalAnalysis",
        "Young's modulus, density and Poisson ratio definitions", None,
        qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.Density(),
        WC.PoissonRatio(),
    ])
    WC.add_boundaries_page(wiz)
    add_modes_page(wiz)
    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz

Ejemplo n.º 2

Archivo: linear_thermic.py Proyecto: takeru7584/salome_work

def create_wizard(mod):
    """Create the linear thermic wizard"""
    #    wiz = WC.Wizard(u"Linear thermal analysis", mod)
    #    wiz = WC.Wizard(u"線形熱伝導解析", mod)
    wiz = WC.Wizard(
        qt.QApplication.translate("WizardLinearThermic",
                                  "Linear thermal analysis", None,
                                  qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.Plane,
    ])
    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())
    WC.add_mesh_page(wiz, mod, exp_store)
    #    title = u"Thermal conductivity definition"
    #    title = u"熱伝導率の設定"
    #qt.QApplication.translate("WizardLinearThermic", "", None, qt.QApplication.UnicodeUTF8)
    title = qt.QApplication.translate("WizardLinearThermic",
                                      "Thermal conductivity definition", None,
                                      qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        ThermalConductance(),
    ])
    add_imposed_temps_page(wiz)
    add_normal_streams_page(wiz)
    add_volumic_sources_page(wiz)
    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz

Ejemplo n.º 3

Archivo: linear_static.py Proyecto: takeru7584/Aster_Wizard_for_Salome-Meca_2015.1

def create_wizard(mod):
    """Create the linear static wizard"""
#    wiz = WC.Wizard(u"Isotropic linear elastic study", mod)
#    wiz = WC.Wizard(u"等方性線形弾性材料の応力解析", mod)
    wiz = WC.Wizard(qt.QApplication.translate("WizardLinearStatic", "Isotropic linear elastic study", None, qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.PlaneStress,
        WC.PlaneStrain,
        WC.AxisSymmetric,
        ])

    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())
    WC.add_mesh_page(wiz, mod, exp_store)
#    title = u"Young's modulus and Poisson ratio definitions"
#    title = u"ヤング係数とポアソン比の設定"
    title = qt.QApplication.translate("WizardLinearStatic", "Young's modulus and Poisson ratio definitions", None, qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.PoissonRatio(),
    ])
    WC.add_boundaries_page(wiz)
    add_pressure_page(wiz)
    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz

Ejemplo n.º 4

Archivo: modal_analysis.py Proyecto: takeru7584/Aster_Wizard_for_Salome-Meca_2015.1

def create_wizard(mod):
    """Create the modal analysis wizard"""
#    wiz = WC.Wizard(u"Modal analysis", mod)
#    wiz = WC.Wizard(u"固有値解析", mod)
    wiz = WC.Wizard(qt.QApplication.translate("WizardModalAnalysis", "Modal analysis", None, qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.PlaneStress,
        WC.PlaneStrain,
        WC.AxisSymmetric,
        ])
    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())
    WC.add_mesh_page(wiz, mod, exp_store)
#    title = u"Young's modulus, density and Poisson ratio definitions"
#    title = u"ヤング係数、密度とポアソン比の設定"
    #qt.QApplication.translate("WizardModalAnalysis", "", None, qt.QApplication.UnicodeUTF8)
    title = qt.QApplication.translate("WizardModalAnalysis", "Young's modulus, density and Poisson ratio definitions", None, qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.Density(),
        WC.PoissonRatio(),
    ])
    WC.add_boundaries_page(wiz)
    add_modes_page(wiz)
    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz

Ejemplo n.º 5

Archivo: linear_thermic.py Proyecto: takeru7584/Aster_Wizard_for_Salome-Meca_2015.1

def create_wizard(mod):
    """Create the linear thermic wizard"""
#    wiz = WC.Wizard(u"Linear thermal analysis", mod)
#    wiz = WC.Wizard(u"線形熱伝導解析", mod)
    wiz = WC.Wizard(qt.QApplication.translate("WizardLinearThermic", "Linear thermal analysis", None, qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.Plane,
        ])
    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())
    WC.add_mesh_page(wiz, mod, exp_store)
#    title = u"Thermal conductivity definition"
#    title = u"熱伝導率の設定"
    #qt.QApplication.translate("WizardLinearThermic", "", None, qt.QApplication.UnicodeUTF8)
    title = qt.QApplication.translate("WizardLinearThermic", "Thermal conductivity definition", None, qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        ThermalConductance(),
    ])
    add_imposed_temps_page(wiz)
    add_normal_streams_page(wiz)
    add_volumic_sources_page(wiz)
    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz

Ejemplo n.º 6

Archivo: linear_static_plus.py Proyecto: takeru7584/salome_work

def create_wizard(mod):
    """Create the linear static wizard"""
    #    wiz = WC.Wizard(u"Isotropic linear elastic study", mod)
    #print "Check3"
    #wiz = WC.Wizard(u"等方性線形弾性材料の応力解析", mod)
    wiz = WC.Wizard(
        qt.QApplication.translate("WizardLinearStaticPlus",
                                  "Isotropic linear elastic study", None,
                                  qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.PlaneStress,
        WC.PlaneStrain,
        WC.AxisSymmetric,
    ])

    #print "Check4"
    exp_store = WC.ExpStore()
    #print "Check4-1"
    #print WC.ExpStore.smesh
    #print SMeshExp()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    #print "Check4-2"
    exp_store.register(WC.ExpStore.geom, GeomExp())
    #print "Check5"
    WC.add_mesh_page(wiz, mod, exp_store)
    #    title = u"Young's modulus and Poisson ratio definitions"
    #    title = u"ヤング係数とポアソン比の設定"
    title = qt.QApplication.translate(
        "WizardLinearStaticPlus",
        "Young's modulus and Poisson ratio definitions", None,
        qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.PoissonRatio(),
    ])
    WC.add_boundaries_page(wiz)
    print "Check Boundaries"
    add_loadvertex_page(wiz)
    print "Check LoadVertex"
    add_loadedge_page(wiz)
    print "Check LoadEdge"
    add_loadface_page(wiz)
    print "Check LoadFace"
    add_pressure_page(wiz)
    print "Check Pressure"
    WC.add_command_file_page(wiz, FinalPage(mod))
    print "Check CommandFile"
    #print "Check6"
    return wiz

Ejemplo n.º 7

Archivo: linear_static_plus.py Proyecto: takeru7584/Aster_Wizard_for_Salome-Meca_2015.1

def create_wizard(mod):
    """Create the linear static wizard"""
#    wiz = WC.Wizard(u"Isotropic linear elastic study", mod)
    #print "Check3"
    #wiz = WC.Wizard(u"等方性線形弾性材料の応力解析", mod)
    wiz = WC.Wizard(qt.QApplication.translate("WizardLinearStaticPlus", "Isotropic linear elastic study", None, qt.QApplication.UnicodeUTF8), mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.PlaneStress,
        WC.PlaneStrain,
        WC.AxisSymmetric,
        ])

    #print "Check4"
    exp_store = WC.ExpStore()
    #print "Check4-1"
    #print WC.ExpStore.smesh
    #print SMeshExp()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    #print "Check4-2"
    exp_store.register(WC.ExpStore.geom, GeomExp())
    #print "Check5"
    WC.add_mesh_page(wiz, mod, exp_store)
#    title = u"Young's modulus and Poisson ratio definitions"
#    title = u"ヤング係数とポアソン比の設定"
    title = qt.QApplication.translate("WizardLinearStaticPlus", "Young's modulus and Poisson ratio definitions", None, qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.PoissonRatio(),
    ])
    WC.add_boundaries_page(wiz)
    print "Check Boundaries"
    add_loadvertex_page(wiz)
    print "Check LoadVertex"
    add_loadedge_page(wiz)
    print "Check LoadEdge"
    add_loadface_page(wiz)
    print "Check LoadFace"
    add_pressure_page(wiz)
    print "Check Pressure"
    WC.add_command_file_page(wiz, FinalPage(mod))
    print "Check CommandFile"
    #print "Check6"
    return wiz

Ejemplo n.º 8

def create_wizard(mod):
    """Create the modal analysis wizard"""
    wiz = WC.Wizard(u"Modal analysis", mod)

    ###################Page1##########################################

    add_model_Npage(wiz, [
        ((WC.Mode3DV, True), []),
        ((WC.PlaneStress, True), []),
        ((WC.PlaneStrain, True), []),
        ((WC.AxisSymmetric, True), []),
        ((WC.Ele_filaire, False), [((WC.POU_D_E, True), []),
                                   ((WC.POU_D_T, True), [])]),
        ((WC.Ele_surface, False), [((WC.DKT, True), []), ((WC.DST, True), []),
                                   ((WC.COQUE_3D, True), [])]),
    ])

    #################Page2#############################################
    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())

    WC.add_mesh_page(wiz, mod, exp_store)

    ################Page3##############################################
    add_cara_page(wiz)

    ################Page4##############################################
    title = qt.QApplication.translate(
        "", u"Young's modulus, density and Poisson ratio definitions", None,
        qt.QApplication.UnicodeUTF8)
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.Density(),
        WC.PoissonRatio(),
    ])
    ################Page5##############################################
    add_boundariesES_page(wiz)
    ################Page6##############################################
    add_mode_page(wiz)

    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz

Ejemplo n.º 9

Archivo: linear_static.py Proyecto: zhanxiangqian/experience

def create_wizard(mod):
    """Create the linear static wizard"""
    wiz = WC.Wizard(u"Isotropic linear elastic study", mod)
    WC.add_model_page(wiz, [
        WC.Mode3D,
        WC.PlaneStress,
        WC.PlaneStrain,
        WC.AxisSymmetric,
        ])

    exp_store = WC.ExpStore()
    exp_store.register(WC.ExpStore.smesh, SMeshExp())
    exp_store.register(WC.ExpStore.geom, GeomExp())
    WC.add_mesh_page(wiz, mod, exp_store)
    title = u"Young's modulus and Poisson ratio definitions"
    WC.add_material_page(wiz, title, [
        WC.YoungModulus(),
        WC.PoissonRatio(),
    ])
    WC.add_boundaries_page(wiz)
    add_pressure_page(wiz)
    WC.add_command_file_page(wiz, FinalPage(mod))
    return wiz