Ejemplo n.º 1
0
def Inv_sqrt(L_x) -> int:
    """
    # (o) Q30 : output value   (range: 0<=val<1)
    # (i) Q0  : input value    (range: 0<=val<=7fffffff)
    """

    if L_x <= 0:
        return basic_op.MAX_INT_30

    exp = basic_op.norm_l(L_x)
    L_x = basic_op.L_shl(L_x, exp)  # L_x is normalize

    exp = basic_op.sub(30, exp)
    if (exp & 1) == 0:  # If exponent even -> shift right
        L_x = basic_op.L_shr(L_x, 1)

    exp = basic_op.shr(exp, 1)
    exp = basic_op.add(exp, 1)

    L_x = basic_op.L_shr(L_x, 9)
    i = basic_op.extract_h(L_x)  # Extract b25-b31
    L_x = basic_op.L_shr(L_x, 1)
    a = basic_op.extract_l(L_x)  # Extract b10-b24
    a = a & 0x7fff

    i = basic_op.sub(i, 16)

    L_y = basic_op.L_deposit_h(tab_ld8a.tabsqr[i])  # tabsqr[i] << 16
    tmp = basic_op.sub(tab_ld8a.tabsqr[i],
                       tab_ld8a.tabsqr[i + 1])  # tabsqr[i] - tabsqr[i+1])
    L_y = basic_op.L_msu(L_y, tmp, a)  # L_y -=  tmp*a*2

    L_y = basic_op.L_shr(L_y, exp)  # denormalization

    return L_y
Ejemplo n.º 2
0
def Lsp_stability(buf: List[int]) -> None:
    """
    # (i/o) Q13 : quantized LSP parameters
    """

    for j in range(0, M - 1):
        L_acc = L_deposit_l(buf[j + 1])
        L_accb = L_deposit_l(buf[j])
        L_diff = L_sub(L_acc, L_accb)

        if L_diff < 0:
            # exchange buf[j]<->buf[j+1]
            tmp = buf[j + 1]
            buf[j + 1] = buf[j]
            buf[j] = tmp

    if sub(buf[0], L_LIMIT) < 0:
        buf[0] = L_LIMIT
        # printf("lsp_stability warning Low \n")

    for j in range(j, M - 1):
        L_acc = L_deposit_l(buf[j + 1])
        L_accb = L_deposit_l(buf[j])
        L_diff = L_sub(L_acc, L_accb)

        if L_sub(L_diff, GAP3) < 0:
            buf[j + 1] = add(buf[j], GAP3)

    if sub(buf[M - 1], M_LIMIT) > 0:
        buf[M - 1] = M_LIMIT
Ejemplo n.º 3
0
def Log2(L_x: int, exponent: int, fraction: int) -> Tuple[int, int]:
    """
    # (i) Q0 : input value 
    # (o) Q0 : Integer part of Log2.   (range: 0<=val<=30)
    # (o) Q15: Fractional  part of Log2. (range: 0<=val<1)
    """

    if L_x <= 0:
        return (0, 0)

    exp = basic_op.norm_l(L_x)
    L_x = basic_op.L_shl(L_x, exp)  # L_x is normalized

    exponent = basic_op.sub(30, exp)

    L_x = basic_op.L_shr(L_x, 9)
    i = basic_op.extract_h(L_x)  # Extract b25-b31
    L_x = basic_op.L_shr(L_x, 1)
    a = basic_op.extract_l(L_x)  # Extract b10-b24 of fraction
    a = a & 0x7fff

    i = basic_op.sub(i, 32)

    L_y = basic_op.L_deposit_h(tab_ld8a.tablog[i])  # tablog[i] << 16
    tmp = basic_op.sub(tab_ld8a.tablog[i],
                       tab_ld8a.tablog[i + 1])  # tablog[i] - tablog[i+1]
    L_y = basic_op.L_msu(L_y, tmp, a)  # L_y -= tmp*a*2

    fraction = basic_op.extract_h(L_y)

    return (exponent, fraction)
Ejemplo n.º 4
0
def Lsp_expand_1_2(buf: List[int], gap) -> None:
    """
    # (i/o) Q13 : LSP vectors
    # (i)   Q13 : gap
    """

    for j in range(1, M):
        diff = sub(buf[j - 1], buf[j])
        tmp = shr(add(diff, gap), 1)

        if tmp > 0:
            buf[j - 1] = sub(buf[j - 1], tmp)
            buf[j] = add(buf[j], tmp)
Ejemplo n.º 5
0
def Pred_lt_3(exc: List[int], T0: int, frac: int, L_subfr: int) -> None:

    x0 = exc[-T0]

    frac = basic_op.negate(frac)
    if frac < 0:
        frac = basic_op.add(frac, UP_SAMP)
        x0 = x0 - 1

    for j in range(0, L_subfr):
        x1 = x0
        x0 = x0 + 1
        x2 = x0

        c1 = tab_ld8a.inter_31[frac]
        c2 = tab_ld8a.inter_31[basic_op.sub(UP_SAMP, frac)]

        s = 0
        k = 0
        for i in range(0, L_INTER10):
            s = basic_op.L_mac(s, x1[-i], c1[k])
            s = basic_op.L_mac(s, x2[i], c2[k])

            k = k + UP_SAMP

        exc[j] = basic_op.round(s)
Ejemplo n.º 6
0
def Gain_update_erasure(past_qua_en: List[int]) -> None:
    # (i) Q10 :Past quantized energies

    L_tmp = 0  # Q10
    for i in range(0, 4):
        L_tmp = basic_op.L_add(L_tmp, basic_op.L_deposit_l(past_qua_en[i]))

    av_pred_en = basic_op.extract_l(basic_op.L_shr(L_tmp, 2))
    av_pred_en = basic_op.sub(av_pred_en, 4096)  # Q10

    if basic_op.sub(av_pred_en, -14336) < 0:
        av_pred_en = -14336  # 14336:14[Q10]

    for i in range(3, 0, -1):
        past_qua_en[i] = past_qua_en[i - 1]

    past_qua_en[0] = av_pred_en
Ejemplo n.º 7
0
def Pow2(exponent: int, fraction: int) -> int:
    """
    # (o) Q0  : result       (range: 0<=val<=0x7fffffff)
    # (i) Q0  : Integer part.      (range: 0<=val<=30)
    # (i) Q15 : Fractional part.   (range: 0.0<=val<1.0)
    """

    L_x = basic_op.L_mult(fraction, 32)  # L_x = fraction<<6
    i = basic_op.extract_h(L_x)  # Extract b10-b15 of fraction
    L_x = basic_op.L_shr(L_x, 1)
    a = basic_op.extract_l(L_x)  # Extract b0-b9   of fraction
    a = a & 0x7fff

    L_x = basic_op.L_deposit_h(tab_ld8a.tabpow[i])  # tabpow[i] << 16
    tmp = basic_op.sub(tab_ld8a.tabpow[i],
                       tab_ld8a.tabpow[i + 1])  # tabpow[i] - tabpow[i+1]
    L_x = basic_op.L_msu(L_x, tmp, a)  # L_x -= tmp*a*2

    exp = basic_op.sub(30, exponent)
    L_x = basic_op.L_shr_r(L_x, exp)

    return L_x
Ejemplo n.º 8
0
def Gain_update(past_qua_en: List[int], L_gbk12: int) -> None:
    """
    # (io) Q10 :Past quantized energies
    # (i) Q13 : gbk1[indice1][1]+gbk2[indice2][1]
    """

    for i in range(3, 0, -1):
        past_qua_en[i] = past_qua_en[i - 1]  # Q10

    ##########
    # -- past_qua_en[0] = 20*log10(gbk1[index1][1]+gbk2[index2][1]) --
    #    2 * 10 log10( gbk1[index1][1]+gbk2[index2][1] )
    #  = 2 * 3.0103 log2( gbk1[index1][1]+gbk2[index2][1] )
    #  = 2 * 3.0103 log2( gbk1[index1][1]+gbk2[index2][1] )
    #                                                 24660:Q12(6.0205)
    ##########

    exp, frac = dsp_func.Log2(L_gbk12, exp, frac)  # L_gbk12:Q13
    L_acc = oper_32b.L_Comp(basic_op.sub(exp, 13), frac)  # L_acc:Q16
    tmp = basic_op.extract_h(basic_op.L_shl(L_acc, 13))  # tmp:Q13
    past_qua_en[0] = basic_op.mult(tmp, 24660)  # past_qua_en[]:Q10
Ejemplo n.º 9
0
def Levinson(Rh: List[int], Rl: List[int], A: List[int], rc: List[int]) -> None:
    """
    # (i)     : Rh[M+1] Vector of autocorrelations (msb)
    # (i)     : Rl[M+1] Vector of autocorrelations (lsb)
    # (o) Q12 : A[M]    LPC coefficients  (m = 10)
    # (o) Q15 : rc[M]   Reflection coefficients.
    """

    # LPC coef. in double prec. 
    Ah = [0] * (M + 1)
    Al = [0] * (M + 1)

    # LPC coef.for next iteration in double prec.
    Anh = [0] * (M + 1)
    Anl = [0] * (M + 1)

    # K = A[1] = -R[1] / R[0] 

    t1 = oper_32b.L_Comp(Rh[1], Rl[1])          # R[1] in Q31      
    t2 = basic_op.L_abs(t1)                     # abs R[1]         
    t0 = oper_32b.Div_32(t2, Rh[0], Rl[0])      # R[1]/R[0] in Q31

    if t1 > 0:
        t0 = basic_op.L_negate(t0)              # -R[1]/R[0]

    Kh, Kl = oper_32b.L_Extract(t0)             # K in DPF         
    rc[0] = Kh
    t0 = basic_op.L_shr(t0, 4)                  # A[1] in Q27      
    Ah[1], Al[1] = oper_32b.L_Extract(t0)       # A[1] in DPF      

    #  Alpha = R[0] * (1-K**2) 

    t0 = oper_32b.Mpy_32(Kh, Kl, Kh, Kl)            # K*K      in Q31 
    t0 = basic_op.L_abs(t0)                         # Some case <0 !! 
    t0 = basic_op.L_sub(basic_op.MAX_INT_32, t0)    # 1 - K*K  in Q31 
    hi, lo = L_Extract(t0)                          # DPF format      
    t0 = oper_32b.Mpy_32(Rh[0], Rl[0], hi, lo)      # Alpha in Q31    

    # Normalize Alpha 

    alp_exp = basic_op.norm_l(t0)
    t0 = basic_op.L_shl(t0, alp_exp)
    alp_h, alp_l = L_Extract(t0)                    # DPF format    

    ########
    # ITERATIONS  I=2 to M
    ########

    for i in range(2, ld8a.M + 1):
        # t0 = SUM ( R[j]*A[i-j] ,j=1,i-1 ) +  R[i] 

        t0 = 0
        for j in range(1, i):
            t0 = basic_op.L_add(t0, oper_32b.Mpy_32(Rh[j], Rl[j], Ah[i - j], Al[i - j]))

        t0 = basic_op.L_shl(t0, 4)                  # result in Q27 -> convert to Q31 
                                                    # No overflow possible            
        t1 = oper_32b.L_Comp(Rh[i], Rl[i])
        t0 = basic_op.L_add(t0, t1)                 # add R[i] in Q31                 

        # K = -t0 / Alpha

        t1 = basic_op.L_abs(t0)
        t2 = oper_32b.Div_32(t1, alp_h, alp_l)      # abs(t0)/Alpha
        
        if t0 > 0:
            t2 = basic_op.L_negate(t2)              # K =-t0/Alpha                    
        t2 = basic_op.L_shl(t2, alp_exp)            # denormalize compare to Alpha   
        Kh, Kl = L_Extract(t2)                      # K in DPF                        
        rc[i - 1] = Kh

        # Test for unstable filter. If unstable keep old A(z) 

        if basic_op.sub(basic_op.abs_s(Kh), 32750) > 0:
            for j in range(0, ld8a.M + 1):
                A[j] = old_A[j]
            
            rc[0] = old_rc[0]       # only two rc coefficients are needed 
            rc[1] = old_rc[1]
            return
        

        ##########
        # Compute new LPC coeff. -> An[i]         *
        # An[j]= A[j] + K*A[i-j]     , j=1 to i-1 *
        # An[i]= K                                *
        ##########

        for j in range (1, i):
            t0 = oper_32b.Mpy_32(Kh, Kl, Ah[i - j], Al[i - j])
            t0 = basic_op.L_add(t0, oper_32b.L_Comp(Ah[j], Al[j]))
            Anh[j], Anl[j] = L_Extract(t0)
        
        t2 = basic_op.L_shr(t2, 4)              # t2 = K in Q31 ->convert to Q27  
        Anh[i], Anl[i] = L_Extract(t2)          # An[i] in Q27                    

        #  Alpha = Alpha * (1-K**2) 

        t0 = oper_32b.Mpy_32(Kh, Kl, Kh, Kl)            # K*K      in Q31 
        t0 = basic_op.L_abs(t0)                         # Some case <0 !! 
        t0 = basic_op.L_sub(basic_op.MAX_INT_32, t0)    # 1 - K*K  in Q31 
        hi, lo = L_Extract(t0)                          # DPF format      
        t0 = oper_32b.Mpy_32(alp_h, alp_l, hi, lo)      # Alpha in Q31    

        # Normalize Alpha 

        j = basic_op.norm_l(t0)
        t0 = basic_op.L_shl(t0, j)
        alp_h, alp_l = L_Extract(t0)            # DPF format    
        alp_exp = basic_op.add(alp_exp, j)      # Add normalization to alp_exp 

        # A[j] = An[j] 

        for j in range(1, i + 1):
            Ah[j] = Anh[j]
            Al[j] = Anl[j]

    # Truncate A[i] in Q27 to Q12 with rounding 

    A[0] = 4096

    for i in range(1, ld8a.M + 1):
        t0 = oper_32b.L_Comp(Ah[i], Al[i])
        old_A[i] = A[i] = basic_op.round(L_shl(t0, 1))
    
    old_rc[0] = rc[0]
    old_rc[1] = rc[1]
Ejemplo n.º 10
0
def Az_lsp(a: List[int], lsp: List[int], old_lsp: List[int]) -> None:
    """
    # (i) Q12 : predictor coefficients
    # (o) Q15 : line spectral pairs
    # (i)     : old lsp[] (in case not found 10 roots)
    """

    #Word16 i, j, nf, ip
    #Word16 xlow, ylow, xhigh, yhigh, xmid, ymid, xint
    #Word16 x, y, sign, exp
    #Word16 *coef
    #Word16 f1[M / 2 + 1], f2[M / 2 + 1]
    #Word32 t0, L_temp
    #Flag ovf_coef
    #Word16 (*pChebps)(Word16 x, Word16 f[], Word16 n)

    f1 = [0] * ((ld8a.M / 2) + 1)
    f2 = [0] * ((ld8a.M / 2) + 1)

    #########
    # find the sum and diff. pol. F1(z) and F2(z)                
    # F1(z) <--- F1(z)/(1+z**-1) & F2(z) <--- F2(z)/(1-z**-1)  
    # 
    # f1[0] = 1.0                                                
    # f2[0] = 1.0                                                
    # 
    # for (i = 0 i< NC i++)                                     
    # {                                                           
    #   f1[i+1] = a[i+1] + a[M-i] - f1[i]                       
    #   f2[i+1] = a[i+1] - a[M-i] + f2[i]                        
    # }                                                           
    ########

    ovf_coef = 0
    pChebps = 'Chebps_11'

    f1[0] = 2048        # f1[0] = 1.0 is in Q11 
    f2[0] = 2048        # f2[0] = 1.0 is in Q11

    for i in range(0, ld8a.NC):
        basic_op.setOverflow(0)
        t0 = basic_op.L_mult(a[i + 1], 16384)       # x = (a[i+1] + a[M-i]) >> 1        
        t0 = basic_op.L_mac(t0, a[M - i], 16384)    #    -> From Q12 to Q11             
        x = basic_op.extract_h(t0)

        if basic_op.getOverflow() != 0:
            ovf_coef = 1

        basic_op.setOverflow(0)
        f1[i + 1] = basic_op.sub(x, f1[i])          # f1[i+1] = a[i+1] + a[M-i] - f1[i]

        if basic_op.getOverflow() != 0: 
            ovf_coef = 1

        basic_op.setOverflow(0)
        t0 = basic_op.L_mult(a[i + 1], 16384)       # x = (a[i+1] - a[M-i]) >> 1        
        t0 = basic_op.L_msu(t0, a[M - i], 16384)    #    -> From Q12 to Q11             
        x = basic_op.extract_h(t0)

        if basic_op.getOverflow() != 0: 
            ovf_coef = 1

        basic_op.setOverflow(0)
        f2[i + 1] = basic_op.add(x, f2[i]) # f2[i+1] = a[i+1] - a[M-i] + f2[i] 
        
        if basic_op.getOverflow() != 0: 
            ovf_coef = 1

    if ovf_coef == 1:
        #printf("===== OVF ovf_coef =====\n")

        pChebps = 'Chebps_10'

        f1[0] = 1024                # f1[0] = 1.0 is in Q10 
        f2[0] = 1024                # f2[0] = 1.0 is in Q10 

        for i in range(0, ld8a.NC):
            t0 = basic_op.L_mult(a[i + 1], 8192)        # x = (a[i+1] + a[M-i]) >> 1        
            t0 = basic_op.L_mac(t0, a[M - i], 8192)     #    -> From Q11 to Q10             
            x = basic_op.extract_h(t0)
            f1[i + 1] = basic_op.sub(x, f1[i])          # f1[i+1] = a[i+1] + a[M-i] - f1[i] 

            t0 = basic_op.L_mult(a[i + 1], 8192)        # x = (a[i+1] - a[M-i]) >> 1        
            t0 = basic_op.L_msu(t0, a[M - i], 8192)     #    -> From Q11 to Q10             
            x = basic_op.extract_h(t0)
            f2[i + 1] = basic_op.add(x, f2[i])          # f2[i+1] = a[i+1] - a[M-i] + f2[i] 


    ########
    # find the LSPs using the Chebichev pol. evaluation
    ########

    nf = 0      # number of found frequencies 
    ip = 0      # indicator for f1 or f2      

    coef = f1   # Alias for f1 or f2

    xlow = grid[0]
    if pChebps == 'Chebps_11':
        ylow = Chebps_11(xlow, coef, NC)
    else:
        ylow = Chebps_10(xlow, coef, NC)

    j = 0
    while nf < ld81.M and j < ld8a.GRID_POINTS:
        j = basic_op.add(j, 1)
        xhigh = xlow
        yhigh = ylow
        xlow = grid[j]
        if pChebps == 'Chebps_11':
            ylow = Chebps_11(xlow, coef, ld8a.NC)
        else:
            ylow = Chebps_10(xlow, coef, ld8a.NC)

        L_temp = basic_op.L_mult(ylow, yhigh)

        if L_temp <= 0:
            # divide 2 times the interval

            for i in range(0, 2):
                xmid = basic_op.add(basic_op.shr(xlow, 1), basic_op.shr(xhigh, 1))  # xmid = (xlow + xhigh)/2 

                if pChebps == 'Chebps_11':
                    ymid = Chebps_11(xmid, coef, ld8a.NC)
                else:
                    ymid = Chebps_10(xmid, coef, ld8a.NC)

                L_temp = basic_op.L_mult(ylow, ymid)
                if L_temp <= 0:
                    yhigh = ymid
                    xhigh = xmid
                else:
                    ylow = ymid
                    xlow = xmid

            ########
            # Linear interpolation                    
            #   xint = xlow - ylow*(xhigh-xlow)/(yhigh-ylow) 
            ########

            x = basic_op.sub(xhigh, xlow)
            y = basic_op.sub(yhigh, ylow)

            if y == 0:
                xint = xlow
            else:
                sign = y
                y = basic_op.abs_s(y)
                exp = basic_op.norm_s(y)
                y = basic_op.shl(y, exp)
                y = basic_op.div_s(16383, y)
                t0 = basic_op.L_mult(x, y)
                t0 = basic_op.L_shr(t0, basic_op.sub(20, exp))
                y = basic_op.extract_l(t0)                      # y= (xhigh-xlow)/(yhigh-ylow) in Q11 

                if sign < 0:
                    y = basic_op.negate(y)

                t0 = basic_op.L_mult(ylow, y)                       # result in Q26 
                t0 = basic_op.L_shr(t0, 11)                         # result in Q15 
                xint = basic_op.sub(xlow, basic_op.extract_l(t0))   # xint = xlow - ylow*y 

            lsp[nf] = xint
            xlow = xint
            nf = basic_op.add(nf, 1)

            if ip == 0:
                ip = 1
                coef = f2
            else:
                ip = 0
                coef = f1
            
            if pChebps == 'Chebps_11':
                ylow = Chebps_11(xlow, coef, ld8a.NC)
            else:
                ylow = Chebps_10(xlow, coef, ld8a.NC)

    # Check if M roots found 

    if basic_op.sub(nf, ld8a.M) < 0:
        for i in range (0, ld8a.M):
            lsp[i] = old_lsp[i]
Ejemplo n.º 11
0
def Gain_predict(past_qua_en: List[int], code: List[int],
                 L_subfr: int) -> Tuple[int, int]:
    """
    # (i) Q10 :Past quantized energies
    # (i) Q13 :Innovative vector.
    # (i)     :Subframe length.
    # (o) Qxx :Predicted codebook gain      - omitted param
    # (o)     :Q-Format(gcode0)             - omitted param
    """

    #Word16  i, exp, frac
    #Word32  L_tmp

    ##########
    # Energy coming from code
    ##########

    L_tmp = 0
    for i in range(0, L_subfr):
        L_tmp = basic_op.L_mac(L_tmp, code[i], code[i])

    ##########
    #  Compute: means_ener - 10log10(ener_code/ L_sufr)
    #  Note: mean_ener change from 36 dB to 30 dB because input/2
    #
    # = 30.0 - 10 log10( ener_code / lcode)  + 10log10(2^27)
    #                                          !!ener_code in Q27!!
    # = 30.0 - 3.0103  log2(ener_code) + 10log10(40) + 10log10(2^27)
    # = 30.0 - 3.0103  log2(ener_code) + 16.02  + 81.278
    # = 127.298 - 3.0103  log2(ener_code)
    ##########

    exp, frac = dsp_func.Log2(L_tmp, exp, frac)  # Q27->Q0 ^Q0 ^Q15
    L_tmp = oper_32b.Mpy_32_16(exp, frac, -24660)  # Q0 Q15 Q13 -> ^Q14
    # hi:Q0+Q13+1
    # lo:Q15+Q13-15+1
    # -24660[Q13]=-3.0103
    L_tmp = basic_op.L_mac(basic_op.L_tmp, 32588, 32)  # 32588*32[Q14]=127.298

    ##########
    # Compute gcode0.                                                 *
    #  = Sum(i=0,3) pred[i]*past_qua_en[i] - ener_code + mean_ener    *
    ##########

    L_tmp = basic_op.L_shl(L_tmp, 10)  # From Q14 to Q24
    for i in range(0, 4):
        L_tmp = basic_op.L_mac(L_tmp, pred[i], past_qua_en[i])  # Q13*Q10 ->Q24

    gcode0 = basic_op.extract_h(L_tmp)  # From Q24 to Q8

    ##########
    # gcode0 = pow(10.0, gcode0/20)                                   *
    #        = pow(2, 3.3219*gcode0/20)                               *
    #        = pow(2, 0.166*gcode0)                                   *
    ##########

    L_tmp = basic_op.L_mult(gcode0, 5439)  # *0.166 in Q15, result in Q24
    L_tmp = basic_op.L_shr(L_tmp, 8)  # From Q24 to Q16
    exp, frac = oper_32b.L_Extract(L_tmp, exp,
                                   frac)  # Extract exponent of gcode0

    gcode0 = basic_op.extract_l(dsp_func.Pow2(
        14, frac))  # Put 14 as exponent so that
    # output of Pow2() will be:
    # 16768 < Pow2() <= 32767
    exp_gcode0 = basic_op.sub(14, exp)

    return (gcode0, exp_gcode0)