def test_multiple_schedulers(self):
p = self.project
self.assertFalse(p.has_scheduler)
b = Builder(project = p, name="test builder")
b.save()
# create cron scheduler
cr = CronScheduler(project=p, name="cron")
cr.save()
self.assertEqual(1, p.scheduler_set.count())
self.assertEqual(unicode(cr), "cron")
self.assertFalse(p.has_scheduler) # scheduler has no assigned builder
cr.builders.add(b)
self.assertTrue(p.has_scheduler)
# create change scheduler
ch = ChangeScheduler(project=p, name="change")
ch.save()
self.assertEqual(2, p.scheduler_set.count())
self.assertEqual(unicode(ch), "change")
# check that they can be downcasted properly
expect = [_("cron scheduler"), _("change scheduler")]
for i,s in enumerate(p.scheduler_set.all()):
# calling method on parent class should raise exception
self.assertRaises(NotImplementedError, s.get_config_type)
self.assertRaises(NotImplementedError, s.get_config_class)
self.assertRaises(NotImplementedError, s.get_config_args)
# should work with .cast()
self.assertEqual(expect[i], s.cast().get_config_type())
class AbstractTestShellCommand(BbotuiModelTestCase):
"""
Abstract class for the following TestCases. pre-instantiates
self.project and self.builder
"""
def setUp(self):
# call method in parent class (instantiates self.project)
super(AbstractTestShellCommand, self).setUp()
# create builder
self.builder = Builder(project=self.project, name="test builder")
self.builder.save()
self.assertTrue(self.builder.id != None)
def setUp(self):
super(TestObjPaginator, self).setUp()
p = self.project
self.builder_empty = Builder(project=p, name="empty builder")
self.builder_empty.save()
self.builder = Builder(project=p, name="builder")
self.builder.save()
b = self.builder
self.stepcount = 10
for i in xrange(self.stepcount):
step = CompileStep(builder=b, name="step-%d"%i)
step.save()
def setUp(self):
# call method in parent class (instantiates self.project)
super(AbstractTestShellCommand, self).setUp()
# create builder
self.builder = Builder(project=self.project, name="test builder")
self.builder.save()
self.assertTrue(self.builder.id != None)
def test_move_down(self):
"""
Tests step.move_down()
"""
b = Builder(project=self.project, name="my builder")
b.save()
s = []
# create 3 steps, mix and match step types
s.append(CompileStep(
builder = b,
name = "compile the code",
command = "make",
))
s.append(ConfigureStep(
builder = b,
name = "configure the code",
command = "./configure",
))
s.append(ShellCommandStep(
builder = b,
name = "run some command",
command = "./run",
))
for step in s:
step.save()
self.assertNotEqual(step.id, None)
# check initial positions
self._update_and_confirm_order(s, [0,1,2])
# do a series of moves
s[2].move_down()
self._update_and_confirm_order(s, [0,1,2]) # bottom elem cannot move down
s[0].move_down()
self._update_and_confirm_order(s, [1,0,2])
s[0].move_down()
self._update_and_confirm_order(s, [1,2,0])
s[1].move_down()
self._update_and_confirm_order(s, [2,1,0])
def test_simple_creation(self):
"""
Basic Change based scheduler
"""
sched = ChangeScheduler(project = self.project, name = "change")
sched.save()
self.assertNotEqual(sched.id, None)
self.assertEqual(unicode(sched), "change")
self.assertEqual(sched.cast().get_config_type(), _("change scheduler"))
# add builders
builders = ["builder1", "builder2", "builder3"]
for bname in builders:
b = Builder(project=self.project, name=bname)
b.save()
sched.builders.add(b)
self.assertEqual(sched.builders.count(), len(builders))
args = sched.cast().get_config_args()
# check default arguments
self.assertEqual(args.get("name", None), "change")
self.assertEqual(args.get("treeStableTimer", None), settings.DEFAULT_TREE_STABLE_TIMER * 60)
# check builderName
bn = args.get("builderNames", [])
self.assertEqual(len(bn), len(builders))
for i,b in enumerate(builders):
self.assertEqual(bn[i], b)
# try instantiating buildbot config object
self.assert_valid_buildbot_config(sched.cast().get_config_class(), args)
# check filter class
self.assertEqual(sched.cast().get_filter_class(), None)
self.assertEqual(sched.cast().get_filter_args(), None)
# Check that the resulting config string is sensible
self.assert_config_string_executable(sched.cast())
self.assertEqual(None, sched.get_filter_str())
def test_position_integrity(self):
"""
Ensure that position cannot be duplicated
"""
b = Builder(project=self.project, name="my builder")
b.save()
s = CompileStep(
builder = b,
name = "compile the code",
command = "make",
)
s.save()
self.assertNotEqual(s.id, None)
self.assertEqual(s.position, 0)
s2 = CompileStep(
builder = b,
name = "compile the code 2",
command = "make",
)
s2.save()
s2.position = 0
self.assertRaises(IntegrityError, s2.save)
class AbstractTestCheckout(BbotuiModelTestCase):
"""
Abstract class for test cases in this file. Instantiates
self.project, self.builder, self.svn, self.git.
"""
def setUp(self):
# call method in parent class (instantiates self.project)
super(AbstractTestCheckout, self).setUp()
# create builder
self.builder = Builder(project=self.project, name="test builder")
self.builder.save()
self.assertTrue(self.builder.id != None)
# create svn repos
self.svn = SVNRepository(project=self.project, name="test svn repo", url="http://some.url/svn/proj/trunk")
self.svn.save()
self.assertTrue(self.svn.id != None)
# create git repos
self.git = GitRepository(project=self.project, name="test git repo", url="http://some.url/abc.git")
self.git.save()
self.assertTrue(self.git.id != None)
def test_name_uniqueness(self):
"""
Ensure that a builder cannot have multiple steps with the same name or position
"""
b = Builder(project=self.project, name="my builder")
b.save()
s = CompileStep(
builder = b,
name = "compile the code",
command = "make",
)
s.save()
self.assertNotEqual(s.id, None)
# another step, same name
s2 = CompileStep(
builder = b,
name = "compile the code",
command = "make",
)
self.assertRaises(IntegrityError, s2.save)
self.assertEqual(s2.id, None)
# try a different name
s2.name = "another name"
s2.save()
self.assertNotEqual(s2.id, None)
# try forcing same position
s2.position = s.position
self.assertRaises(IntegrityError, s2.save)
# should be ok to have dups with a different builder
b2 = Builder(project=self.project, name="my builder2")
b2.save()
s3 = CompileStep(
builder = b2,
name = "compile the code",
command = "make",
)
s3.save()
self.assertNotEqual(s3.id, None)
def test_swap_position_edge_cases(self):
"""
Step.swap_positions(s1,s2) should not be used manually, but if it is used,
we should make sure we handle some of the edge cases.
"""
# cannot swap steps with negative positions
# (in practice, negative position is used as temp values, so this can
# in fact happen during race conditions when move routines are not used
# within views with @transactionnn.commit_on_success)
b = Builder(project=self.project, name="my builder")
b.save()
s1 = ConfigureStep(
builder = b,
name = "configure the code",
command = "./configure",
)
s1.save()
s2 = ShellCommandStep(
builder = b,
name = "run some command",
command = "./run",
)
s2.save()
s2.position = -2
s2.save()
self.assertRaises(Step.SimultaneousUpdateError, Step.swap_positions, s1, s2)
# cannot swap steps from different builders
b2 = Builder(project=self.project, name="my builder 2")
b2.save()
s3 = ShellCommandStep(
builder = b2,
name = "run some command",
command = "./run",
)
s3.save()
self.assertRaises(ValueError, Step.swap_positions, s1, s3)
def test_with_deleted_steps(self):
"""
If any step is deleted, this affects step_count as well as move_up,
move_down, and addition of new step.
"""
b = Builder(project=self.project, name="my builder")
b.save()
s = []
# create 3 steps, mix and match step types
s.append(CompileStep(
builder = b,
name = "compile the code",
command = "make",
))
s.append(ConfigureStep(
builder = b,
name = "configure the code",
command = "./configure",
))
s.append(ShellCommandStep(
builder = b,
name = "run some command",
command = "./run",
))
for step in s:
step.save()
self.assertNotEqual(step.id, None)
# check initial positions
self._update_and_confirm_order(s, [0,1,2])
# get ori order
ids = [x.id for x in s]
# delete first item
d = s.pop(0)
d.delete()
self._update_refs(s)
ids.pop(0)
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
# move bottom one up
s[1].move_up()
self._update_refs(s)
ids[0],ids[1] = ids[1],ids[0]
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
# move it up again (should remain the same)
s[1].move_up()
self._update_refs(s)
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
# move bottom one down (should remain the same)
s[0].move_down()
self._update_refs(s)
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
# add new step
step = ConfigureStep(
builder = b,
name = "configure the code2",
command = "./configure",
)
step.save()
self.assertNotEqual(step.id, None)
s.append(step)
self._update_refs(s)
ids.append(step.id)
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
# move new step down
step.move_down()
self._update_refs(s)
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
# move new step up
step.move_up()
self._update_refs(s)
ids[-1],ids[-2] = ids[-2],ids[-1]
self.assertListEqual(ids, [x.id for x in b.step_set.all()])
def test_mixed_steps(self):
p = self.project
b = Builder(project=p, name="my builder")
b.save()
self.assertEqual(b.is_complete, False)
# add shell command step
step_shell = ShellCommandStep(
builder = b,
name = "a shell command",
command = "./some_command",
)
step_shell.save()
self.assertNotEqual(step_shell.id, None)
self.assertEqual(step_shell.position, 0)
self.assertEqual(b.step_count, 1)
# add compile step
step_compile = CompileStep(
builder = b,
name = "compile the code",
command = "make",
)
step_compile.save()
self.assertNotEqual(step_compile.id, None)
self.assertEqual(step_compile.position, 1)
self.assertEqual(b.step_count, 2)
# add configure step
step_configure = ConfigureStep(
builder = b,
name = "configure the code",
command = "./configure",
)
step_configure.save()
self.assertNotEqual(step_configure.id, None)
self.assertEqual(step_configure.position, 2)
self.assertEqual(b.step_count, 3)
# add test step
step_test = TestStep(
builder = b,
name = "test the code",
command = "make",
arguments = "test",
)
step_test.save()
self.assertNotEqual(step_test.id, None)
self.assertEqual(step_test.position, 3)
self.assertEqual(b.step_count, 4)
expect = [_("shell command"), _("compile"), _("configure"), _("test")]
for i,s in enumerate(b.step_set.all()):
# calling method on parent class should raise exception
self.assertRaises(NotImplementedError, s.get_config_type)
self.assertRaises(NotImplementedError, s.get_config_class)
self.assertRaises(NotImplementedError, s.get_config_args)
# should work with r.cast()
self.assertEqual(expect[i], s.cast().get_config_type())
self.assertEqual(type(s.cast().get_config_class()), type(()))
self.assertEqual(type(s.cast().get_config_args()), type({}))
class TestObjPaginator(BbotuiModelTestCase):
def setUp(self):
super(TestObjPaginator, self).setUp()
p = self.project
self.builder_empty = Builder(project=p, name="empty builder")
self.builder_empty.save()
self.builder = Builder(project=p, name="builder")
self.builder.save()
b = self.builder
self.stepcount = 10
for i in xrange(self.stepcount):
step = CompileStep(builder=b, name="step-%d"%i)
step.save()
def test_page_for_id(self):
# test on empty builder
p = ObjPaginator(self.builder_empty.step_set.all())
self.assertRaises(InvalidInput, p.page_for_id, -1)
self.assertRaises(InvalidInput, p.page_for_id, 0)
self.assertRaises(InvalidInput, p.page_for_id, "str")
# test on qs with content
count = self.stepcount # expect ids = [1:count]
p = ObjPaginator(self.builder.step_set.all())
self.assertRaises(InvalidInput, p.page_for_id, 0)
self.assertRaises(InvalidInput, p.page_for_id, count+1)
self.assertRaises(InvalidInput, p.page_for_id, "str")
for i in xrange(1, count+1):
page = p.page_for_id(i)
self.assertEqual(page.obj.id, i)
def test_page_navigation(self):
count = self.stepcount # expect ids = [1:count]
p = ObjPaginator(self.builder.step_set.all())
# first page has no prev
page = p.page_for_id(1)
self.assertFalse(page.has_previous())
self.assertTrue(page.has_next())
self.assertEqual(None, page.get_previous_obj())
self.assertEqual(None, page.previous_obj)
# last page has no next
page = p.page_for_id(count)
self.assertFalse(page.has_next())
self.assertTrue(page.has_previous())
self.assertEqual(None, page.get_next_obj())
self.assertEqual(None, page.next_obj)
# something in between should have next and previous
self.assertTrue(count > 3) # make sure we have enough elems
page = p.page_for_id(count-2)
self.assertTrue(page.has_next())
self.assertTrue(page.has_previous())
self.assertNotEqual(None, page.get_next_obj())
self.assertNotEqual(None, page.next_obj)
self.assertNotEqual(None, page.get_previous_obj())
self.assertNotEqual(None, page.previous_obj)
# use page as linked list and iterate till the end
# well, not quite a linked list since next/prev_obj links to
# obj and not the next Page.
page = p.page_for_id(1)
for i in xrange(1, count): # till second last
self.assertNotEqual(None, page)
self.assertEqual(i, page.obj.id)
page = p.page_for_id(page.next_obj.id)
self.assertNotEqual(None, page)
self.assertEqual(count, page.obj.id)
self.assertEqual(None, page.next_obj)
# not run backwards
for i in xrange(count,1,-1): # till second
self.assertNotEqual(None, page)
self.assertEqual(i, page.obj.id)
page = p.page_for_id(page.previous_obj.id)
self.assertNotEqual(None, page)
self.assertEqual(1, page.obj.id)
self.assertEqual(None, page.previous_obj)
def test_simple_creation(self):
"""
Basic cron-like scheduler
"""
sched = CronScheduler(project = self.project, name = "cron")
sched.save()
self.assertNotEqual(sched.id, None)
self.assertEqual(unicode(sched), "cron")
self.assertEqual(sched.cast().get_config_type(), _("cron scheduler"))
# add builders
builders = ["builder1", "builder2", "builder3"]
for bname in builders:
b = Builder(project=self.project, name=bname)
b.save()
sched.builders.add(b)
self.assertEqual(sched.builders.count(), len(builders))
args = sched.cast().get_config_args()
# check default arguments
self.assertEqual(args.get("name", None), "cron")
self.assertEqual(args.get("minute", None), "*")
self.assertEqual(args.get("hour", None), "*")
self.assertEqual(args.get("month", None), "*")
self.assertEqual(args.get("dayOfWeek", None), "*")
self.assertEqual(args.get("dayOfMonth", None), "*")
self.assertEqual(args.get("onlyIfChanged", None), True)
# check builderName
bn = args.get("builderNames", [])
self.assertEqual(len(bn), len(builders))
for i,b in enumerate(builders):
self.assertEqual(bn[i], b)
# try instantiating buildbot config object
self.assert_valid_buildbot_config(sched.cast().get_config_class(), args)
# Check that the resulting config string is sensible
self.assert_config_string_executable(sched.cast())
# Check that changes in options are reflected in generated config
sched.name = "newcode"
sched.minute = 30
sched.hour = 13
sched.month = 5
sched.day_of_month = 3
sched.day_of_week = 4
sched.only_if_code_changed = False
sched.save()
args = sched.cast().get_config_args()
self.assertEqual(args.get("name", None), "newcode")
self.assertEqual(args.get("minute", None), 30)
self.assertEqual(args.get("hour", None), 13)
self.assertEqual(args.get("month", None), 5)
self.assertEqual(args.get("dayOfWeek", None), 4)
self.assertEqual(args.get("dayOfMonth", None), 3)
self.assertEqual(args.get("onlyIfChanged", None), False)
# try instantiating buildbot config object
self.assert_valid_buildbot_config(sched.cast().get_config_class(), args)
# Check that the resulting config string is sensible
self.assert_config_string_executable(sched.cast())