def wait(self):
"""Loop waiting on children to die and respawning as necessary."""
systemd.notify_once()
LOG.debug('Full set of CONF:')
CONF.log_opt_values(LOG, logging.DEBUG)
try:
while True:
self.handle_signal()
self._respawn_children()
# No signal means that stop was called. Don't clean up here.
if not self.sigcaught:
return
signame = _signo_to_signame(self.sigcaught)
LOG.info(_LI('Caught %s, stopping children'), signame)
if not _is_sighup_and_daemon(self.sigcaught):
break
cfg.CONF.reload_config_files()
for service in set(
[wrap.service for wrap in self.children.values()]):
service.reset()
for pid in self.children:
os.kill(pid, signal.SIGHUP)
self.running = True
self.sigcaught = None
except eventlet.greenlet.GreenletExit:
LOG.info(_LI("Wait called after thread killed. Cleaning up."))
self.stop()
def _start_child(self, wrap):
if len(wrap.forktimes) > wrap.workers:
# Limit ourselves to one process a second (over the period of
# number of workers * 1 second). This will allow workers to
# start up quickly but ensure we don't fork off children that
# die instantly too quickly.
if time.time() - wrap.forktimes[0] < wrap.workers:
LOG.info(_LI('Forking too fast, sleeping'))
time.sleep(1)
wrap.forktimes.pop(0)
wrap.forktimes.append(time.time())
pid = os.fork()
if pid == 0:
launcher = self._child_process(wrap.service)
while True:
self._child_process_handle_signal()
status, signo = self._child_wait_for_exit_or_signal(launcher)
if not _is_sighup_and_daemon(signo):
break
launcher.restart()
os._exit(status)
LOG.info(_LI('Started child %d'), pid)
wrap.children.add(pid)
self.children[pid] = wrap
return pid
def _wait_child(self):
try:
# Don't block if no child processes have exited
pid, status = os.waitpid(0, os.WNOHANG)
if not pid:
return None
except OSError as exc:
if exc.errno not in (errno.EINTR, errno.ECHILD):
raise
return None
if os.WIFSIGNALED(status):
sig = os.WTERMSIG(status)
LOG.info(_LI('Child %(pid)d killed by signal %(sig)d'),
dict(pid=pid, sig=sig))
else:
code = os.WEXITSTATUS(status)
LOG.info(_LI('Child %(pid)s exited with status %(code)d'),
dict(pid=pid, code=code))
if pid not in self.children:
LOG.warning(_LW('pid %d not in child list'), pid)
return None
wrap = self.children.pop(pid)
wrap.children.remove(pid)
return wrap
def __exit__(self, ex_type, ex_value, ex_traceback):
if not ex_value:
return True
if isinstance(ex_value, exception.Forbidden):
raise Fault(
webob.exc.HTTPForbidden(explanation=ex_value.format_message()))
elif isinstance(ex_value, exception.VersionNotFoundForAPIMethod):
raise
elif isinstance(ex_value, exception.Invalid):
raise Fault(
exception.ConvertedException(
code=ex_value.code, explanation=ex_value.format_message()))
elif isinstance(ex_value, TypeError):
exc_info = (ex_type, ex_value, ex_traceback)
LOG.error(_LE('Exception handling resource: %s'),
ex_value,
exc_info=exc_info)
raise Fault(webob.exc.HTTPBadRequest())
elif isinstance(ex_value, Fault):
LOG.info(_LI("Fault thrown: %s"), ex_value)
raise ex_value
elif isinstance(ex_value, webob.exc.HTTPException):
LOG.info(_LI("HTTP exception thrown: %s"), ex_value)
raise Fault(ex_value)
# We didn't handle the exception
return False
def _pipe_watcher(self):
# This will block until the write end is closed when the parent
# dies unexpectedly
self.readpipe.read()
LOG.info(_LI('Parent process has died unexpectedly, exiting'))
sys.exit(1)
def wait(self):
"""Block, until the server has stopped.
Waits on the server's eventlet to finish, then returns.
:returns: None
"""
try:
if self._server is not None:
self._pool.waitall()
self._server.wait()
except greenlet.GreenletExit:
LOG.info(_LI("WSGI server has stopped."))
def stop(self):
"""Stop this server.
This is not a very nice action, as currently the method by which a
server is stopped is by killing its eventlet.
:returns: None
"""
LOG.info(_LI("Stopping WSGI server."))
if self._server is not None:
# Resize pool to stop new requests from being processed
self._pool.resize(0)
self._server.kill()
def stop(self):
"""Terminate child processes and wait on each."""
self.running = False
for pid in self.children:
try:
os.kill(pid, signal.SIGTERM)
except OSError as exc:
if exc.errno != errno.ESRCH:
raise
# Wait for children to die
if self.children:
LOG.info(_LI('Waiting on %d children to exit'), len(self.children))
while self.children:
self._wait_child()
def initialize_if_enabled():
backdoor_locals = {
'exit': _dont_use_this, # So we don't exit the entire process
'quit': _dont_use_this, # So we don't exit the entire process
'fo': _find_objects,
'pgt': _print_greenthreads,
'pnt': _print_nativethreads,
}
if CONF.backdoor_port is None:
return None
start_port, end_port = _parse_port_range(str(CONF.backdoor_port))
# NOTE(johannes): The standard sys.displayhook will print the value of
# the last expression and set it to __builtin__._, which overwrites
# the __builtin__._ that gettext sets. Let's switch to using pprint
# since it won't interact poorly with gettext, and it's easier to
# read the output too.
def displayhook(val):
if val is not None:
pprint.pprint(val)
sys.displayhook = displayhook
sock = _listen('localhost', start_port, end_port, eventlet.listen)
# In the case of backdoor port being zero, a port number is assigned by
# listen(). In any case, pull the port number out here.
port = sock.getsockname()[1]
LOG.info(
_LI('Eventlet backdoor listening on %(port)s for process %(pid)d') % {
'port': port,
'pid': os.getpid()
})
eventlet.spawn_n(eventlet.backdoor.backdoor_server,
sock,
locals=backdoor_locals)
return port
def _wait_for_exit_or_signal(self, ready_callback=None):
status = None
signo = 0
LOG.debug('Full set of CONF:')
CONF.log_opt_values(LOG, logging.DEBUG)
try:
if ready_callback:
ready_callback()
super(ServiceLauncher, self).wait()
except SignalExit as exc:
signame = _signo_to_signame(exc.signo)
LOG.info(_LI('Caught %s, exiting'), signame)
status = exc.code
signo = exc.signo
except SystemExit as exc:
status = exc.code
finally:
self.stop()
return status, signo
def _child_wait_for_exit_or_signal(self, launcher):
status = 0
signo = 0
# NOTE(johannes): All exceptions are caught to ensure this
# doesn't fallback into the loop spawning children. It would
# be bad for a child to spawn more children.
try:
launcher.wait()
except SignalExit as exc:
signame = _signo_to_signame(exc.signo)
LOG.info(_LI('Child caught %s, exiting'), signame)
status = exc.code
signo = exc.signo
except SystemExit as exc:
status = exc.code
except BaseException:
LOG.exception(_LE('Unhandled exception'))
status = 2
finally:
launcher.stop()
return status, signo
def __init__(self,
name,
app,
host='0.0.0.0',
port=0,
pool_size=None,
protocol=eventlet.wsgi.HttpProtocol,
backlog=128,
use_ssl=False,
max_url_len=None):
"""Initialize, but do not start, a WSGI server.
:param name: Pretty name for logging.
:param app: The WSGI application to serve.
:param host: IP address to serve the application.
:param port: Port number to server the application.
:param pool_size: Maximum number of eventlets to spawn concurrently.
:param backlog: Maximum number of queued connections.
:param max_url_len: Maximum length of permitted URLs.
:returns: None
:raises: nova.exception.InvalidInput
"""
# Allow operators to customize http requests max header line size.
eventlet.wsgi.MAX_HEADER_LINE = CONF.max_header_line
self.name = name
self.app = app
self._server = None
self._protocol = protocol
self.pool_size = pool_size or self.default_pool_size
self._pool = eventlet.GreenPool(self.pool_size)
self._logger = logging.getLogger("billing.%s.wsgi.server" % self.name)
self._wsgi_logger = loggers.WritableLogger(self._logger)
self._use_ssl = use_ssl
self._max_url_len = max_url_len
self.client_socket_timeout = CONF.client_socket_timeout or None
if backlog < 1:
raise exception.InvalidInput(
reason='The backlog must be more than 1')
bind_addr = (host, port)
# TODO(dims): eventlet's green dns/socket module does not actually
# support IPv6 in getaddrinfo(). We need to get around this in the
# future or monitor upstream for a fix
try:
info = socket.getaddrinfo(bind_addr[0], bind_addr[1],
socket.AF_UNSPEC, socket.SOCK_STREAM)[0]
family = info[0]
bind_addr = info[-1]
except Exception:
family = socket.AF_INET
try:
self._socket = eventlet.listen(bind_addr, family, backlog=backlog)
except EnvironmentError:
LOG.error(_LE("Could not bind to %(host)s:%(port)s"), {
'host': host,
'port': port
})
raise
(self.host, self.port) = self._socket.getsockname()[0:2]
LOG.info(_LI("%(name)s listening on %(host)s:%(port)s"), {
'name': self.name,
'host': self.host,
'port': self.port
})
def launch_service(self, service, workers=1):
wrap = ServiceWrapper(service, workers)
LOG.info(_LI('Starting %d workers'), wrap.workers)
while self.running and len(wrap.children) < wrap.workers:
self._start_child(wrap)
