cdef("""
typedef enum
{
BLADERF_MODULE_RX, /**< Receive Module */
BLADERF_MODULE_TX /**< Transmit Module */
} bladerf_module;
typedef enum {
BLADERF_SAMPLING_UNKNOWN, /**< Unable to determine connection type */
BLADERF_SAMPLING_INTERNAL, /**< Sample from RX/TX connector */
BLADERF_SAMPLING_EXTERNAL /**< Sample from J60 or J61 */
} bladerf_sampling;
typedef enum {
BLADERF_LNA_GAIN_UNKNOWN, /**< Invalid LNA gain */
BLADERF_LNA_GAIN_BYPASS, /**< LNA bypassed - 0dB gain */
BLADERF_LNA_GAIN_MID, /**< LNA Mid Gain (MAX-6dB) */
BLADERF_LNA_GAIN_MAX /**< LNA Max Gain */
} bladerf_lna_gain;
typedef enum {
BLADERF_LPF_NORMAL, /**< LPF connected and enabled */
BLADERF_LPF_BYPASSED, /**< LPF bypassed */
BLADERF_LPF_DISABLED /**< LPF disabled */
} bladerf_lpf_mode;
/** Minimum RXVGA1 gain, in dB */
#define BLADERF_RXVGA1_GAIN_MIN ...
/** Maximum RXVGA1 gain, in dB */
#define BLADERF_RXVGA1_GAIN_MAX ...
/** Minimum RXVGA2 gain, in dB */
#define BLADERF_RXVGA2_GAIN_MIN ...
/** Maximum RXVGA2 gain, in dB */
#define BLADERF_RXVGA2_GAIN_MAX ...
/** Minimum TXVGA1 gain, in dB */
#define BLADERF_TXVGA1_GAIN_MIN ...
/** Maximum TXVGA1 gain, in dB */
#define BLADERF_TXVGA1_GAIN_MAX ...
/** Minimum TXVGA2 gain, in dB */
#define BLADERF_TXVGA2_GAIN_MIN ...
/** Maximum TXVGA2 gain, in dB */
#define BLADERF_TXVGA2_GAIN_MAX ...
/** Minimum sample rate, in Hz */
#define BLADERF_SAMPLERATE_MIN ...
/** Maximum recommended sample rate, in Hz */
#define BLADERF_SAMPLERATE_REC_MAX ...
/** Minimum bandwidth, in Hz */
#define BLADERF_BANDWIDTH_MIN ...
/** Maximum bandwidth, in Hz */
#define BLADERF_BANDWIDTH_MAX ...
/** Minimum tunable frequency (without an XB-200 attached), in Hz */
#define BLADERF_FREQUENCY_MIN ...
/** Maximum tunable frequency, in Hz */
#define BLADERF_FREQUENCY_MAX ...
""")
cdef("""
typedef enum {
BLADERF_FORMAT_SC16_Q11, /**< Signed, Complex 16-bit Q11.
* This is the native format of the DAC data.
*
* Samples are interleaved IQ value pairs, where
* each value in the pair is an int16_t. For each
* value, the data in the lower bits. The upper
* bits are reserved.
*
* When using this format, note that buffers
* must be at least
* 2 * num_samples * sizeof(int16_t)
* bytes large
*/
} bladerf_format;
/**
* For both RX and TX, the stream callback receives:
* dev: Device structure
* stream: The associated stream
* metadata: TBD
* user_data: User data provided when initializing stream
*
* <br>
*
* For TX callbacks:
* samples: Pointer fo buffer of samples that was sent
* num_samples: Number of sent in last transfer and to send in next transfer
*
* Return value: The user specifies the address of the next buffer to send
*
* For RX callbacks:
* samples: Buffer filled with received data
* num_samples: Number of samples received and size of next buffers
*
* Return value: The user specifies the next buffer to fill with RX data,
* which should be num_samples in size.
*
*/
typedef void *(*bladerf_stream_cb)(struct bladerf *dev,
struct bladerf_stream *stream,
struct bladerf_metadata *meta,
void *samples,
size_t num_samples,
void *user_data);
struct bladerf_metadata {
uint64_t timestamp; /**< Timestamp (TODO format TBD) */
uint32_t flags; /**< Metadata format flags */
uint32_t status; /**< Metadata format status */
unsigned int actual_count; /**< number of contiguous received samples */
uint8_t reserved[32]; /**< reserved */
};
""")
import bladeRF
from bladeRF import _cffi
from bladeRF._cffi import ffi, cdef, ptop
cdef("""
typedef enum {
BLADERF_FPGA_UNKNOWN = 0, /**< Unable to determine FPGA variant */
BLADERF_FPGA_40KLE = 40, /**< 40 kLE FPGA */
BLADERF_FPGA_115KLE = 115 /**< 115 kLE FPGA */
} bladerf_fpga_size;
""")
@cdef('int bladerf_get_fpga_size(struct bladerf *dev, bladerf_fpga_size *size);')
def get_fpga_size(dev):
size = ffi.new('bladerf_fpga_size *')
err = _cffi.lib.bladerf_get_fpga_size(dev, size)
bladeRF.errors.check_retcode(err)
return int(size[0])
import bladeRF
from bladeRF import _cffi
from bladeRF._cffi import ffi, cdef, ptop
cdef("""
typedef enum {
BLADERF_LOG_LEVEL_VERBOSE, /**< Verbose level logging */
BLADERF_LOG_LEVEL_DEBUG, /**< Debug level logging */
BLADERF_LOG_LEVEL_INFO, /**< Information level logging */
BLADERF_LOG_LEVEL_WARNING, /**< Warning level logging */
BLADERF_LOG_LEVEL_ERROR, /**< Error level logging */
BLADERF_LOG_LEVEL_CRITICAL, /**< Fatal error level logging */
BLADERF_LOG_LEVEL_SILENT /**< No output */
} bladerf_log_level;
""")
@cdef('void bladerf_log_set_verbosity(bladerf_log_level level);')
def log_set_verbosity(level):
_cffi.lib.bladerf_log_set_verbosity(level)
cdef("""
typedef enum
{
BLADERF_MODULE_RX, /**< Receive Module */
BLADERF_MODULE_TX /**< Transmit Module */
} bladerf_module;
typedef enum {
BLADERF_SAMPLING_UNKNOWN, /**< Unable to determine connection type */
BLADERF_SAMPLING_INTERNAL, /**< Sample from RX/TX connector */
BLADERF_SAMPLING_EXTERNAL /**< Sample from J60 or J61 */
} bladerf_sampling;
typedef enum {
BLADERF_LNA_GAIN_UNKNOWN, /**< Invalid LNA gain */
BLADERF_LNA_GAIN_BYPASS, /**< LNA bypassed - 0dB gain */
BLADERF_LNA_GAIN_MID, /**< LNA Mid Gain (MAX-6dB) */
BLADERF_LNA_GAIN_MAX /**< LNA Max Gain */
} bladerf_lna_gain;
typedef enum {
BLADERF_LPF_NORMAL, /**< LPF connected and enabled */
BLADERF_LPF_BYPASSED, /**< LPF bypassed */
BLADERF_LPF_DISABLED /**< LPF disabled */
} bladerf_lpf_mode;
/** Minimum RXVGA1 gain, in dB */
#define BLADERF_RXVGA1_GAIN_MIN ...
/** Maximum RXVGA1 gain, in dB */
#define BLADERF_RXVGA1_GAIN_MAX ...
/** Minimum RXVGA2 gain, in dB */
#define BLADERF_RXVGA2_GAIN_MIN ...
/** Maximum RXVGA2 gain, in dB */
#define BLADERF_RXVGA2_GAIN_MAX ...
/** Minimum TXVGA1 gain, in dB */
#define BLADERF_TXVGA1_GAIN_MIN ...
/** Maximum TXVGA1 gain, in dB */
#define BLADERF_TXVGA1_GAIN_MAX ...
/** Minimum TXVGA2 gain, in dB */
#define BLADERF_TXVGA2_GAIN_MIN ...
/** Maximum TXVGA2 gain, in dB */
#define BLADERF_TXVGA2_GAIN_MAX ...
/** Minimum sample rate, in Hz */
#define BLADERF_SAMPLERATE_MIN ...
/** Maximum recommended sample rate, in Hz */
#define BLADERF_SAMPLERATE_REC_MAX ...
/** Minimum bandwidth, in Hz */
#define BLADERF_BANDWIDTH_MIN ...
/** Maximum bandwidth, in Hz */
#define BLADERF_BANDWIDTH_MAX ...
/** Minimum tunable frequency (without an XB-200 attached), in Hz */
#define BLADERF_FREQUENCY_MIN ...
/** Maximum tunable frequency, in Hz */
#define BLADERF_FREQUENCY_MAX ...
""")
import bladeRF
from bladeRF import _cffi
from bladeRF._cffi import ffi, cdef, ptop
cdef("""
typedef enum {
BLADERF_LOG_LEVEL_VERBOSE, /**< Verbose level logging */
BLADERF_LOG_LEVEL_DEBUG, /**< Debug level logging */
BLADERF_LOG_LEVEL_INFO, /**< Information level logging */
BLADERF_LOG_LEVEL_WARNING, /**< Warning level logging */
BLADERF_LOG_LEVEL_ERROR, /**< Error level logging */
BLADERF_LOG_LEVEL_CRITICAL, /**< Fatal error level logging */
BLADERF_LOG_LEVEL_SILENT /**< No output */
} bladerf_log_level;
""")
@cdef('void bladerf_log_set_verbosity(bladerf_log_level level);')
def log_set_verbosity(level):
_cffi.lib.bladerf_log_set_verbosity(level)
cdef("""
/**
* Sampling connection
*/
typedef enum {
BLADERF_SAMPLING_UNKNOWN, /**< Unable to determine connection type */
BLADERF_SAMPLING_INTERNAL, /**< Sample from RX/TX connector */
BLADERF_SAMPLING_EXTERNAL /**< Sample from J60 or J61 */
} bladerf_sampling;
/**
* LNA gain options
*/
typedef enum {
BLADERF_LNA_GAIN_UNKNOWN, /**< Invalid LNA gain */
BLADERF_LNA_GAIN_BYPASS, /**< LNA bypassed - 0dB gain */
BLADERF_LNA_GAIN_MID, /**< LNA Mid Gain (MAX-6dB) */
BLADERF_LNA_GAIN_MAX /**< LNA Max Gain */
} bladerf_lna_gain;
/**
* LPF mode
*/
typedef enum {
BLADERF_LPF_NORMAL, /**< LPF connected and enabled */
BLADERF_LPF_BYPASSED, /**< LPF bypassed */
BLADERF_LPF_DISABLED /**< LPF disabled */
} bladerf_lpf_mode;
/**
* Module selection for those which have both RX and TX constituents
*/
typedef enum
{
BLADERF_MODULE_RX, /**< Receive Module */
BLADERF_MODULE_TX /**< Transmit Module */
} bladerf_module;
/**
* Expansion boards
*/
typedef enum {
BLADERF_XB_NONE = 0,
BLADERF_XB_100,
BLADERF_XB_200
} bladerf_xb ;
/**
* XB 200 filterbanks
*/
typedef enum {
BLADERF_XB200_50M = 0,
BLADERF_XB200_144M,
BLADERF_XB200_222M,
BLADERF_XB200_CUSTOM
} bladerf_xb200_filter;
/**
* XB 200 signal paths
*/
typedef enum {
BLADERF_XB200_BYPASS = 0,
BLADERF_XB200_MIX
} bladerf_xb200_path;
/**
* DC Calibration Modules
*/
typedef enum
{
BLADERF_DC_CAL_LPF_TUNING,
BLADERF_DC_CAL_TX_LPF,
BLADERF_DC_CAL_RX_LPF,
BLADERF_DC_CAL_RXVGA2
} bladerf_cal_module;
/**
* Correction parameter selection
*
* These values specify the correction parameter to modify or query when
* calling bladerf_set_correction() or bladerf_get_correction(). Note that the
* meaning of the `value` parameter to these functions depends upon the
* correction parameter.
*
*/
typedef enum
{
/**
* Adjusts the in-phase DC offset via controls provided by the LMS6002D
* front end. Valid values are [-2048, 2048], which are scaled to the
* available control bits in the LMS device.
*/
BLADERF_CORR_LMS_DCOFF_I,
/**
* Adjusts the quadrature DC offset via controls provided the LMS6002D
* front end. Valid values are [-2048, 2048], which are scaled to the
* available control bits.
*/
BLADERF_CORR_LMS_DCOFF_Q,
/**
* Adjusts FPGA-based phase correction of [-10, 10] degrees, via a provided
* count value of [-4096, 4096].
*/
BLADERF_CORR_FPGA_PHASE,
/**
* Adjusts FPGA-based gain correction of [0.0, 2.0], via provided
* values in the range of [-4096, 4096], where a value of 0 corresponds to
* a gain of 1.0.
*/
BLADERF_CORR_FPGA_GAIN
} bladerf_correction;
""")
from bladeRF._cffi import ffi, cdef, ptop
cdef("""
typedef enum
{
BLADERF_MODULE_RX, /**< Receive Module */
BLADERF_MODULE_TX /**< Transmit Module */
} bladerf_module;
typedef enum {
BLADERF_SAMPLING_UNKNOWN, /**< Unable to determine connection type */
BLADERF_SAMPLING_INTERNAL, /**< Sample from RX/TX connector */
BLADERF_SAMPLING_EXTERNAL /**< Sample from J60 or J61 */
} bladerf_sampling;
typedef enum {
BLADERF_LNA_GAIN_UNKNOWN, /**< Invalid LNA gain */
BLADERF_LNA_GAIN_BYPASS, /**< LNA bypassed - 0dB gain */
BLADERF_LNA_GAIN_MID, /**< LNA Mid Gain (MAX-6dB) */
BLADERF_LNA_GAIN_MAX /**< LNA Max Gain */
} bladerf_lna_gain;
typedef enum {
BLADERF_LPF_NORMAL, /**< LPF connected and enabled */
BLADERF_LPF_BYPASSED, /**< LPF bypassed */
BLADERF_LPF_DISABLED /**< LPF disabled */
} bladerf_lpf_mode;
""")
@cdef('int bladerf_enable_module(struct bladerf *dev, '
cdef("""
typedef enum {
/**
* Signed, Complex 16-bit Q11. This is the native format of the DAC data.
*
* Values in the range [-2048, 2048) are used to represent [-1.0, 1.0).
* Note that the lower bound here is inclusive, and the upper bound is
* exclusive. Ensure that provided samples stay within [-2048, 2047].
*
* Samples consist of interleaved IQ value pairs, with I being the first
* value in the pair. Each value in the pair is a right-aligned,
* little-endian int16_t. The FPGA ensures that these values are
* sign-extended.
*
* When using this format the minimum required buffer size, in bytes, is:
* <pre>
* buffer_size_min = [ 2 * num_samples * sizeof(int16_t) ]
* </pre>
*
* For example, to hold 2048 samples, a buffer must be at least 8192 bytes
* large.
*/
BLADERF_FORMAT_SC16_Q11,
/**
* This format is the same as the ::BLADERF_FORMAT_SC16_Q11 format, except the
* first 4 samples (16 bytes) in every block of 1024 samples are replaced
* with metadata, organized as follows, with all fields being little endian
* byte order:
*
* <pre>
* 0x00 [uint32_t: Reserved]
* 0x04 [uint64_t: 64-bit Timestamp]
* 0x0c [uint32_t: BLADERF_META_FLAG_* flags]
* </pre>
*
* When using the bladerf_sync_rx() and bladerf_sync_tx() functions,
* this detail is transparent to caller. These functions take care of
* packing/unpacking the metadata into/from the data, via the
* bladerf_metadata structure.
*
* Currently, when using the asynchronous data transfer interface, the user
* is responsible for manually packing/unpacking this metadata into/from
* their sample data.
*/
BLADERF_FORMAT_SC16_Q11_META,
} bladerf_format;
/**
* For both RX and TX, the stream callback receives:
* dev: Device structure
* stream: The associated stream
* metadata: TBD
* user_data: User data provided when initializing stream
*
* <br>
*
* For TX callbacks:
* samples: Pointer fo buffer of samples that was sent
* num_samples: Number of sent in last transfer and to send in next transfer
*
* Return value: The user specifies the address of the next buffer to send
*
* For RX callbacks:
* samples: Buffer filled with received data
* num_samples: Number of samples received and size of next buffers
*
* Return value: The user specifies the next buffer to fill with RX data,
* which should be num_samples in size.
*
*/
typedef void *(*bladerf_stream_cb)(struct bladerf *dev,
struct bladerf_stream *stream,
struct bladerf_metadata *meta,
void *samples,
size_t num_samples,
void *user_data);
// Updated metadata struct, as of 2015-08-15
struct bladerf_metadata {
uint64_t timestamp; /**< Timestamp (TODO format TBD) */
uint32_t flags; /**< Metadata format flags */
uint32_t status; /**< Metadata format status */
unsigned int actual_count;
uint8_t reserved[32];
};
""")
