def parameterSweep(dataFile, inputs, inputs2, index):
# Record time to solve
t0 = time.time()
# Load_Data - Expected Columns (units): DatetimeUTC (UTC format), t (min), dt (min), demand (MW), solar (MW)
data = pd.read_csv(dataFile)
data.loc[:, 'solar'] = data.loc[:, 'solar'] * inputs2.solarCapacity / 32.3
# Solar Plant - All inputs are optional (default values shown below)
solar = Solar(plantType='PV',
capacity=inputs2.solarCapacity,
cost_install=2004.,
cost_OM_fix=22.02)
# Battery Storage - All inputs are optional (default values shown below)
batt = Battery(capacity=inputs2.battSize,
rateMax=inputs2.battSize,
roundTripEff=90.0,
cost_install=2067.,
cost_OM_fix=35.6,
initCharge=100.0)
# Fuel - All inputs are optional (default values shown below)
fuel = Fuel(fuelType='NATGAS', cost=23.27, emissions=0.18)
# Create power plant
# 1 - create pandas series of power plant characteristics
plant_inputs = defaultInputs(
plantType='CCGT'
) # Start with CCGT default inputs and then adjust to specific case
plant_inputs.plantType = inputs.sheetname
plant_inputs.Eff_A = inputs.Eff_A
plant_inputs.Eff_B = inputs.Eff_B
plant_inputs.Eff_C = inputs.Eff_C
plant_inputs.maxEfficiency = inputs.maxEfficiency
plant_inputs.rampRate = inputs.rampRate
plant_inputs.minRange = inputs.minRange
plant_inputs.cost_install = inputs.cost_install
plant_inputs.cost_OM_fix = inputs.cost_OM_fix
plant_inputs.cost_OM_var = inputs.cost_OM_var
plant_inputs.co2CaptureEff = inputs.co2CaptureEff
plant_inputs.capacity = inputs2.plantSize # MW
# 2 - create power plant
plant = PowerPlant(plant_inputs)
# Create HRES (controller is built-in), data and plant are only required inputs
# all other components will revert to default if not specified
hres = HRES(data, plant, solar=solar, batt=batt, fuel=fuel, i=0.02, n=20)
# Run Simulation
results = hres.run()
# Display Elapsed Time
t1 = time.time()
print("Time Elapsed: " + str(round(t1 - t0, 2)) + " s")
# Combine inputs and results into output and then return
output = pd.concat([inputs, inputs2, results], axis=0)
return output
def parameter_sweep(batt_size):
# Record time to solve
t0 = time.time()
# Load_Data - Expected Columns (units): DatetimeUTC (UTC format), t (min), dt (min), demand (MW), solar (MW)
data = pd.read_csv('data063_Oct30th.csv')
# Solar Plant - All inputs are optional (default values shown below)
solar = Solar(plantType='PV',
capacity=31.2,
cost_install=2004.,
cost_OM_fix=22.02)
# Battery Storage - All inputs are optional (default values shown below)
batt = Battery(capacity=batt_size,
rateMax=batt_size,
roundTripEff=90.0,
cost_install=2067.,
cost_OM_fix=35.6)
# Fuel - All inputs are optional (default values shown below)
fuel = Fuel(fuelType='NATGAS', cost=23.27, emissions=0.18)
# Create power plant
# 1 - create pandas series of power plant characteristics
plant_inputs = defaultInputs(
plantType='CCGT'
) # CCGT(default) or OCGT (Combined Cycle Gas Turbine or Open Cycle Gas Turbine)
# 2 - create power plant
plant = PowerPlant(plant_inputs)
# Create HRES (controller is built-in)
# data and plant are only required inputs, all other components will revert to default if not specified
hres = HRES(data, plant, solar=solar, batt=batt, fuel=fuel, i=0.02, n=20)
# Run Simulation
results = hres.run()
# Display Elapsed Time
t1 = time.time()
print("Time Elapsed: " + str(round(t1 - t0, 2)) + " s")
# Extract LCOE
return results
plant_inputs = defaultInputs(
plantType='CCGT'
) # Start with CCGT default inputs and then adjust to specific case
plant_inputs.plantType = "sCO2"
plant_inputs.Eff_A = -5.60E-03
plant_inputs.Eff_B = 1.05E+00
plant_inputs.Eff_C = 5.00E+01
plant_inputs.maxEfficiency = 53.1
plant_inputs.rampRate = 50.0
plant_inputs.minRange = minRange
# 2 - create power plant
plant = PowerPlant(plant_inputs)
# Create HRES (controller is built-in), data and plant are only required inputs
# all other components will revert to default if not specified
hres = HRES(data, plant, solar=solar, batt=batt, fuel=fuel, i=0.02, n=20)
# Run Simulation
results = hres.run()
# Create Plots and save time series data
saveName = 'Results_SampleDay_Oct30th_sCO2_' + str(minRange)
# hres.plot_battStatus(caseName = saveName)
# hres.plot_EBalance(caseName = saveName)
# hres.plot_efficiency(caseName = saveName)
# hres.plot_pwrRamps(caseName = saveName)
hres.save(saveName)
# results.to_csv(saveName+'_Analysis.csv')
# Display Elapsed Time
t1 = time.time()
cost_install=2067.,
cost_OM_fix=35.6)
# Fuel - All inputs are optional (default values shown below)
fuel = Fuel(fuelType='NATGAS', cost=23.27, emissions=0.18)
# Create power plant
# 1 - create pandas series of power plant characteristics
plant_inputs = defaultInputs(
plantType='CCGT'
) # CCGT(default) or OCGT (Combined Cycle Gas Turbine or Open Cycle Gas Turbine)
# 2 - create power plant
plant = PowerPlant(plant_inputs)
# Create HRES (controller is built-in), data and plant are only required inputs, all other components will revert to default if not specified
hres = HRES(data, plant, solar=solar, batt=batt, fuel=fuel, i=0.02, n=20)
# Run Simulation
results = hres.run()
# Create Plots and save time series data
saveName = 'Results_SampleDay_Oct30th'
hres.plot_battStatus(caseName=saveName)
hres.plot_EBalance(caseName=saveName)
hres.plot_efficiency(caseName=saveName)
hres.plot_pwrRamps(caseName=saveName)
hres.save(saveName)
# Display Elapsed Time
t1 = time.time()
print("Time Elapsed: " + str(round(t1 - t0, 2)) + " s")