def test_dict_render(self):
d = dict(test=WithProperties("repourl%(foo)s"))
url = _ComputeRepositoryURL(d)
self.assertEquals(self.build.render(url), "repourlbar")
def test_callable(self):
func = lambda x: x[::-1]
url = _ComputeRepositoryURL(func)
self.assertEquals(self.build.render(url), "tset")
def test_backward_compatibility_render(self):
url = _ComputeRepositoryURL(WithProperties("repourl%(foo)s"))
self.assertEquals(self.build.render(url), "repourlbar")
def test_format_string(self):
url = _ComputeRepositoryURL("http://server/%s")
self.assertEquals(self.build.render(url), "http://server/test")
def test_dict(self):
dict = {}
dict['test'] = "ssh://server/testrepository"
url = _ComputeRepositoryURL(dict)
self.assertEquals(self.build.render(url), "ssh://server/testrepository")
def test_backward_compatibility(self):
url = _ComputeRepositoryURL("repourl")
self.assertEqual(self.build.render(url), "repourl")
def test_backward_compatibility(self):
url = _ComputeRepositoryURL("repourl")
self.assertEqual(self.build.render(url), "repourl")
def test_callable_render(self):
func = lambda x: WithProperties(x + "%(foo)s")
url = _ComputeRepositoryURL(func)
self.assertEquals(self.build.render(url), "testbar")
def __init__(
self,
repourl=None,
baseURL=None,
mode="incremental",
method=None,
defaultBranch=None,
branchType="dirname",
clobberOnBranchChange=True,
**kwargs
):
"""
@type repourl: string
@param repourl: the URL which points at the Mercurial repository.
This uses the 'default' branch unless defaultBranch is
specified below and the C{branchType} is set to
'inrepo'. It is an error to specify a branch without
setting the C{branchType} to 'inrepo'.
@param baseURL: if 'dirname' branches are enabled, this is the base URL
to which a branch name will be appended. It should
probably end in a slash. Use exactly one of C{repourl}
and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly.
For 'dirname' branches, It will simply be
appended to C{baseURL} and the result handed to
the 'hg update' command.
For 'inrepo' branches, this specifies the named
revision to which the tree will update after a
clone.
@param branchType: either 'dirname' or 'inrepo' depending on whether
the branch name should be appended to the C{baseURL}
or the branch is a mercurial named branch and can be
found within the C{repourl}
@param clobberOnBranchChange: boolean, defaults to True. If set and
using inrepos branches, clobber the tree
at each branch change. Otherwise, just
update to the branch.
"""
self.repourl = repourl
self.baseURL = baseURL
self.defaultBranch = self.branch = defaultBranch
self.branchType = branchType
self.method = method
self.clobberOnBranchChange = clobberOnBranchChange
Source.__init__(self, **kwargs)
self.mode = mode
self.addFactoryArguments(
repourl=repourl,
baseURL=baseURL,
mode=mode,
method=method,
defaultBranch=defaultBranch,
branchType=branchType,
clobberOnBranchChange=clobberOnBranchChange,
)
assert self.mode in ["incremental", "full"]
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and" " baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must privide at least one of repourl and" " baseURL")
self.repourl = self.repourl and _ComputeRepositoryURL(self.repourl)
self.baseURL = self.baseURL and _ComputeRepositoryURL(self.baseURL)
def test_backward_compatibility_render(self):
url = _ComputeRepositoryURL(WithProperties("repourl%(foo)s"))
self.assertEquals(self.build.render(url), "repourlbar")
def test_dict_render(self):
d = dict(test=WithProperties("repourl%(foo)s"))
url = _ComputeRepositoryURL(d)
self.assertEquals(self.build.render(url), "repourlbar")
def test_callable(self):
func = lambda x: x[::-1]
url = _ComputeRepositoryURL(func)
self.assertEquals(self.build.render(url), "tset")
def test_dict(self):
dict = {}
dict['test'] = "ssh://server/testrepository"
url = _ComputeRepositoryURL(dict)
self.assertEquals(self.build.render(url),
"ssh://server/testrepository")
def test_format_string(self):
url = _ComputeRepositoryURL("http://server/%s")
self.assertEquals(self.build.render(url), "http://server/test")
def test_callable_render(self):
func = lambda x: WithProperties(x+"%(foo)s")
url = _ComputeRepositoryURL(func)
self.assertEquals(self.build.render(url), "testbar")
def __init__(self, repourl=None, branch='master', mode='incremental',
method=None, submodule=False, shallow=False, progress=False,
retryFetch=False, clobberOnFailure=False, **kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
"""
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.retryFetch = retryFetch
self.submodule = submodule
self.shallow = shallow
self.fetchcount = 0
self.clobberOnFailure = clobberOnFailure
Source.__init__(self, **kwargs)
self.addFactoryArguments(branch=branch,
mode=mode,
method=method,
progress=progress,
repourl=repourl,
submodule=submodule,
shallow=shallow,
retryFetch=retryFetch,
clobberOnFailure=
clobberOnFailure,
)
self.mode = mode
assert self.mode in ['incremental', 'full']
assert self.repourl is not None
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
self.repourl = self.repourl and _ComputeRepositoryURL(self.repourl)
def __init__(self,
repourl=None,
baseURL=None,
mode='incremental',
method=None,
defaultBranch=None,
branchType='dirname',
clobberOnBranchChange=True,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the Mercurial repository.
This uses the 'default' branch unless defaultBranch is
specified below and the C{branchType} is set to
'inrepo'. It is an error to specify a branch without
setting the C{branchType} to 'inrepo'.
@param baseURL: if 'dirname' branches are enabled, this is the base URL
to which a branch name will be appended. It should
probably end in a slash. Use exactly one of C{repourl}
and C{baseURL}.
@param defaultBranch: if branches are enabled, this is the branch
to use if the Build does not specify one
explicitly.
For 'dirname' branches, It will simply be
appended to C{baseURL} and the result handed to
the 'hg update' command.
For 'inrepo' branches, this specifies the named
revision to which the tree will update after a
clone.
@param branchType: either 'dirname' or 'inrepo' depending on whether
the branch name should be appended to the C{baseURL}
or the branch is a mercurial named branch and can be
found within the C{repourl}
@param clobberOnBranchChange: boolean, defaults to True. If set and
using inrepos branches, clobber the tree
at each branch change. Otherwise, just
update to the branch.
"""
self.repourl = repourl
self.baseURL = baseURL
self.defaultBranch = self.branch = defaultBranch
self.branchType = branchType
self.method = method
self.clobberOnBranchChange = clobberOnBranchChange
Source.__init__(self, **kwargs)
self.mode = mode
self.addFactoryArguments(
repourl=repourl,
baseURL=baseURL,
mode=mode,
method=method,
defaultBranch=defaultBranch,
branchType=branchType,
clobberOnBranchChange=clobberOnBranchChange,
)
assert self.mode in ['incremental', 'full']
if repourl and baseURL:
raise ValueError("you must provide exactly one of repourl and"
" baseURL")
if repourl is None and baseURL is None:
raise ValueError("you must privide at least one of repourl and"
" baseURL")
self.repourl = self.repourl and _ComputeRepositoryURL(self.repourl)
self.baseURL = self.baseURL and _ComputeRepositoryURL(self.baseURL)
def __init__(self,
repourl=None,
branch='master',
mode='incremental',
method=None,
submodule=False,
shallow=False,
progress=False,
retryFetch=False,
clobberOnFailure=False,
**kwargs):
"""
@type repourl: string
@param repourl: the URL which points at the git repository
@type branch: string
@param branch: The branch or tag to check out by default. If
a build specifies a different branch, it will
be used instead of this.
@type submodules: boolean
@param submodules: Whether or not to update (and initialize)
git submodules.
@type mode: string
@param mode: Type of checkout. Described in docs.
@type method: string
@param method: Full builds can be done is different ways. This parameter
specifies which method to use.
@type progress: boolean
@param progress: Pass the --progress option when fetching. This
can solve long fetches getting killed due to
lack of output, but requires Git 1.7.2+.
@type shallow: boolean
@param shallow: Use a shallow or clone, if possible
@type retryFetch: boolean
@param retryFetch: Retry fetching before failing source checkout.
"""
self.branch = branch
self.method = method
self.prog = progress
self.repourl = repourl
self.retryFetch = retryFetch
self.submodule = submodule
self.shallow = shallow
self.fetchcount = 0
self.clobberOnFailure = clobberOnFailure
Source.__init__(self, **kwargs)
self.addFactoryArguments(
branch=branch,
mode=mode,
method=method,
progress=progress,
repourl=repourl,
submodule=submodule,
shallow=shallow,
retryFetch=retryFetch,
clobberOnFailure=clobberOnFailure,
)
self.mode = mode
assert self.mode in ['incremental', 'full']
assert self.repourl is not None
if self.mode == 'full':
assert self.method in ['clean', 'fresh', 'clobber', 'copy', None]
self.repourl = self.repourl and _ComputeRepositoryURL(self.repourl)