def test_HeatingRequired(self):
t_out = 10
t_m_prev = 20
# Internal heat gains, in Watts
internal_gains = 10
# Solar heat gains after transmitting through the winow, in Watts
solar_gains = 2000
# Illuminance after transmitting through the window
ill = 44000 # Lumens
# Occupancy for the timestep [people/hour/square_meter]
occupancy = 0.1
# Set Zone Parameters
Office = Zone(
window_area=13.5,
walls_area=15.19 - 13.5,
floor_area=34.3,
room_vol=106.33,
total_internal_area=142.38,
lighting_load=11.7,
lighting_control=300,
lighting_utilisation_factor=0.45,
lighting_maintenance_factor=0.9,
u_walls=0.2,
u_windows=1.1,
ach_vent=1.5,
ach_infl=0.5,
ventilation_efficiency=0,
thermal_capacitance_per_floor_area=165000,
t_set_heating=20,
t_set_cooling=26,
max_cooling_energy_per_floor_area=-12,
max_heating_energy_per_floor_area=12,
heating_supply_system=supply_system.DirectHeater,
cooling_supply_system=supply_system.DirectCooler,
heating_emission_system=emission_system.AirConditioning,
cooling_emission_system=emission_system.AirConditioning,
)
Office.solve_energy(internal_gains, solar_gains, t_out, t_m_prev)
Office.solve_lighting(ill, occupancy)
self.assertEqual(round(Office.t_m, 2), 20.46)
self.assertTrue(Office.has_heating_demand)
self.assertEqual(round(Office.energy_demand, 2), 328.09)
self.assertEqual(round(Office.heating_sys_electricity, 2), 328.09)
self.assertEqual(round(Office.cooling_sys_electricity, 2), 0)
self.assertEqual(Office.lighting_demand, 0)
mainPath, 'auxiliary', 'Zurich-Kloten_2013.epw'))
# Initialise an instance of the Zone. Empty spaces take on the default
# parameters. See ZonePhysics.py to see the default values
Office = Zone(window_area=4.0,
walls_area=11.0,
floor_area=35.0,
room_vol=105,
total_internal_area=142.0,
lighting_load=11.7,
lighting_control=300.0,
lighting_utilisation_factor=0.45,
lighting_maintenance_factor=0.9,
u_walls=0.2,
u_windows=1.1,
ach_vent=1.5,
ach_infl=0.5,
ventilation_efficiency=0.6,
thermal_capacitance_per_floor_area=165000,
t_set_heating=20.0,
t_set_cooling=26.0,
max_cooling_energy_per_floor_area=-np.inf,
max_heating_energy_per_floor_area=np.inf,
heating_supply_system=supply_system.OilBoilerMed,
cooling_supply_system=supply_system.HeatPumpAir,
heating_emission_system=emission_system.NewRadiators,
cooling_emission_system=emission_system.AirConditioning,)
# Define Windows
SouthWindow = Window(azimuth_tilt=0, alititude_tilt=90, glass_solar_transmittance=0.7,
glass_light_transmittance=0.8, area=4)
os.path.abspath(os.path.join(os.path.dirname(__file__), '..'))) from building_physics import Zone # Importing Zone Class # Example Inputs t_air = 10 t_m_prev = 22 internal_gains = 10 # Internal heat gains, in Watts # Solar heat gains after transmitting through the winow [Watts] solar_gains = 2000 ill = 44000 # Illuminance after transmitting through the window [Lumens] occupancy = 0.1 # Occupancy for the timestep [people/hour/square_meter] # Initialise an instance of the Zone. Empty brackets take on the # default parameters. See ZonePhysics.py to see the default values Office = Zone() # Solve for Zone energy Office.solve_energy(internal_gains, solar_gains, t_air, t_m_prev) # Solve for Zone lighting Office.solve_lighting(ill, occupancy) print(Office.t_m) # Printing Room Temperature of the medium print(Office.lighting_demand) # Print Lighting Demand print(Office.energy_demand) # Print heating/cooling loads # Example of how to change the set point temperature after running a simulation Office.theta_int_h_set = 20.0
] # Energy required by the supply system to provide HeatingDemand
CoolingDemand = [] # Energy surplus of the zone
CoolingEnergy = [
] # Energy required by the supply system to get rid of CoolingDemand
IndoorAir = []
OutsideTemp = []
SolarGains = []
COP = []
gain_per_person = 100 # W per person
appliance_gains = 14 # W per sqm
max_occupancy = 3.0
# Initialise an instance of the Zone. Empty brackets take on the
# default parameters. See ZonePhysics.py to see the default values
Office = Zone()
# Read Weather Data
weatherData = epwreader.epwreader(
os.path.join(mainPath, 'auxiliary', 'Zurich-Kloten_2013.epw'))
# Read Sunposition and Extract Azimuth and Alitutude Angles
sunPosition = pd.read_csv(os.path.join(mainPath, 'auxiliary',
'SunPosition.csv'),
skiprows=1)
altitude = sunPosition.loc[0]
azimuth = 180 - sunPosition.loc[1]
# Read Occupancy Profile
occupancyProfile = pd.read_csv(
roof_area * roof_u_value) / walls_area
print(u_walls)
# Initialise an instance of the Zone. See ZonePhysics.py to see the default values
Office = Zone(
window_area=4.0,
walls_area=walls_area,
floor_area=35.0,
room_vol=105,
total_internal_area=142.0,
lighting_load=11.7,
lighting_control=300.0,
lighting_utilisation_factor=0.45,
lighting_maintenance_factor=0.9,
u_walls=u_walls,
u_windows=1.1,
ach_vent=1.5,
ach_infl=0.5,
ventilation_efficiency=0.6,
thermal_capacitance_per_floor_area=165000,
t_set_heating=20.0,
t_set_cooling=26.0,
max_cooling_energy_per_floor_area=-np.inf,
max_heating_energy_per_floor_area=np.inf,
)
# Solve for Zone energy
Office.solve_energy(internal_gains, solar_gains, t_air, t_m_prev)
# Solve for Zone lighting
