def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
number = calculator_pb2.Number(value=81)
response = stub.SquareRoot(number)
print(response.value)
def run():
# NOTE(gRPC Python Team): .close() is possible on a channel and should be
# used in circumstances in which the with statement does not fit the needs
# of the code.
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.add(calculator_pb2.AddRequest(number1=3, number2=4))
print(response.message)
def run():
print("Input numbers 'x' and 'y' to calculate addition:")
x = float(input("x: "))
y = float(input("y: "))
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.Add(calculator_pb2.AddRequest(x=x, y=y))
print("Addition result: " + str(response.result))
def run():
# NOTE(gRPC Python Team): .close() is possible on a channel and should be
# used in circumstances in which the with statement does not fit the needs
# of the code.
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.Add(calculator_pb2.CalculateRequest(num1=10, num2=15))
print("Result = " + str(response.result))
def run():
channel = grpc.insecure_channel('localhost:50051')
stub = calculator_pb2_grpc.CalculatorStub(channel)
a = int(input("Enter first number: "))
b = int(input("Enter second number: "))
response = stub.addNumbers(calculator_pb2.calculatorRequest(a=a, b=b))
print("Addition of " + str(a) + " and " + str(b) + " is : " +
str(response.sum))
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
a = int(input("Enter first value :"))
b = int(input("Enter second value :"))
response = stub.add(calculator_pb2.addRequest(a=a, b=b))
print("Addition of first value & second value :" + response.result)
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
print("This program will call add(x,y) as remote procedure")
x = input("x=")
y = input("y=")
print("Calculator client sending x={} and y={}".format(x,y))
response = stub.add(calculator_pb2.AddRequest(x=x, y=y))
print("Calculator client received: " + str(response.result))
def get_call(loop, number):
# open a gRPC channel
channel = grpc.insecure_channel('localhost:50051')
# create a stub (client)
stub = calculator_pb2_grpc.CalculatorStub(channel)
number = calculator_pb2.Number(value=number)
response = stub.SquareRoot(number)
print(response)
return response
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
value1 = input("Enter value 1:")
value2 = input("Enter value 2:")
response = stub.addition(
calculator_pb2.AddRequest(val1=int(value1), val2=int(value2)))
print("Sum of the two numbers is " + str(response.result))
def run():
# NOTE(gRPC Python Team): .close() is possible on a channel and should be
# used in circumstances in which the with statement does not fit the needs
# of the code.
with grpc.insecure_channel('localhost:50051') as channel:
#channel: grpc.insecure_channel('localhost:50051')
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.Add(calculator_pb2.AddRequest(x=4,y=2))
print("Addition request received and sum: {}".format(response.z))
def __init__(self, channel=None):
if not channel:
# open a gRPC channel
channel = grpc.insecure_channel('localhost:50051')
else:
channel = grpc.insecure_channel(channel)
# create a stub (client)
self.stub = calculator_pb2_grpc.CalculatorStub(channel)
def run():
# NOTE(gRPC Python Team): .close() is possible on a channel and should be
# used in circumstances in which the with statement does not fit the needs
# of the code.
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
num1 = int(input("Enter first number: "))
num2 = int(input("Enter second number: "))
response = stub.Add(calculator_pb2.AddRequest(a=num1, b=num2))
print("Sum: %d" % response.sum)
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
number = calculator_pb2.Number(value1=99, value2=88)
response = stub.Add(number)
print(
str(response.value1) + ' + ' + str(response.value2) + " = " +
str(response.result))
while True:
time.sleep(_ONE_DAY_IN_SECONDS)
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
while 1:
num_1 = int(input())
num_2 = int(input())
response = stub.CalculateSum(
calculator_pb2.SumRequest(first_num=num_1, sec_num=num_2))
print(response.sum)
print('>>>>>')
def run():
# NOTE(gRPC Python Team): .close() is possible on a channel and should be
# used in circumstances in which the with statement does not fit the needs
# of the code.
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
print("Insert first number : ")
x = int(input())
print("Insert second number : ")
y = int(input())
response = stub.add(
calculator_pb2.CalculationRequest(input1=x, input2=y))
print("Addition of " + str(x) + " and " + str(y) + " is : " +
str(response.result))
def _calculate(server_address: Text, operation: calculator_pb2.Operation,
a: float, b: float, plaintext: bool) -> float:
if plaintext:
channel = grpc.insecure_channel(server_address)
else:
channel = grpc.secure_channel(server_address,
grpc.ssl_channel_credentials())
try:
stub = calculator_pb2_grpc.CalculatorStub(channel)
request = calculator_pb2.BinaryOperation(first_operand=a,
second_operand=b,
operation=operation)
return stub.Calculate(request).result
finally:
channel.close()
def square_root(val: float):
# open a gRPC channel
channel = grpc.insecure_channel('localhost:50051')
# create a stub (client)
stub = calculator_pb2_grpc.CalculatorStub(channel)
# create a valid request message
number = calculator_pb2.Number(value=val)
# make the call
response = stub.SquareRoot(number)
# et voilà
print(response.value)
def run():
channel = grpc.insecure_channel('calculator_server:50051')
stub = calculator_pb2_grpc.CalculatorStub(channel)
# asks server to calculate 10 + 5
response = stub.Calc(
calculator_pb2.CalcRequest(number_1=10, number_2=5, operation='+'))
print("Result: ", response.res)
# asks server to calculate wrong operation
response1 = stub.Calc(
calculator_pb2.CalcRequest(number_1=10, number_2=5, operation='[+]'))
print("Result: ", response1.res)
# asks server to calculate 10 - 5
response2 = stub.Calc(
calculator_pb2.CalcRequest(number_1=10, number_2=5, operation='-'))
print("Result: ", response2.res)
channel.close()
def run():
stop = False
while not stop:
usr_in = input("Do a calculation? [y/n]\n")
if usr_in.lower() == 'n' or usr_in.lower() == 'no':
stop = True
else:
usr_in = input("Please enter term to calculate!\n")
with grpc.insecure_channel(ADDRESS_SERVER_MASTER) as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.Calculate(
calculator_pb2.CalculationRequest(expression=usr_in))
if response.status == calculator_pb2.CalculationResponse.SUCCESS:
print("The result is : " + str(response.result) + '\n')
elif response.status == calculator_pb2.CalculationResponse.ZERO_DIVISION_ERROR:
print("Error: Divide by zero in expression")
else:
print("Invalid format of expression")
def run():
channel = grpc.insecure_channel('localhost:50051')
calc = calculator_pb2_grpc.CalculatorStub(channel)
# Get inputs for operands
while True:
fstOperand = str(input('Please insert first operand:\n')) # Get value
if fstOperand.isnumeric(): # if valid, break
fstOperand = float(fstOperand)
break
print('Invalid entry: %s, please enter a number' %
(fstOperand)) # Err mssg
while True:
scdOperand = str(input('Please insert second operand:\n')) # Get value
if scdOperand.isnumeric(): # If valid, break
scdOperand = float(scdOperand)
break
print('Invalid entry: %s, please enter a number' %
(fstOperand)) # Err mssg
print('1st OPERAND = %f\n2nd OPERAND = %f' % (fstOperand, scdOperand))
print(
'======================================================================'
)
# Addition
tm_start = time.time() # Get current time before calling RPC
result = calc.Addition(
calculator_pb2.AdditionRequest(fstOperandAdd=fstOperand,
scdOperandAdd=scdOperand)).resultAdd
tm_end = time.time() # Get current time after calling RPC
print('%f + %f = %f [%s]' %
(fstOperand, scdOperand, result, tm_end - tm_start)) # print results
# Subtraction
tm_start = time.time()
result = calc.Subtraction(
calculator_pb2.SubtractionRequest(fstOperandSub=fstOperand,
scdOperandSub=scdOperand)).resultSub
tm_end = time.time()
print('%f - %f = %f [%s]' %
(fstOperand, scdOperand, result, tm_end - tm_start))
# Multiplication
tm_start = time.time()
result = calc.Multiplication(
calculator_pb2.MultiplicationRequest(
fstOperandMul=fstOperand, scdOperandMul=scdOperand)).resultMul
tm_end = time.time()
print('%f * %f = %f [%s]' %
(fstOperand, scdOperand, result, tm_end - tm_start))
# Division
tm_start = time.time()
result = calc.Division(
calculator_pb2.DivisionRequest(fstOperandDiv=fstOperand,
scdOperandDiv=scdOperand)).resultDiv
tm_end = time.time()
print('%f / %f = %f [%s]' %
(fstOperand, scdOperand, result, tm_end - tm_start))
import grpc
# import the generated classes
import calculator_pb2
import calculator_pb2_grpc
# open a gRPC channel
channel = grpc.insecure_channel('localhost:50051')
# create a stub (client)
stub = calculator_pb2_grpc.CalculatorStub(channel)
# create a valid request message
msg = calculator_pb2.Message(msg="Alan")
# create a valid request message
number = calculator_pb2.Number(value=16)
# make the call
response = stub.HelloWorld(msg)
print(response.msg)
response = stub.SquareRoot(number)
print(response.value)
number2 = calculator_pb2.Number2(x=16, y=4)
# make the call
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.Add(calculator_pb2.AddRequest(x=n1, y=n2))
print("Calculation result: " + str(response.result))
def __init__(self, channel):
self.stub = calculator_pb2_grpc.CalculatorStub(channel)
def __init__(self):
try:
channel = grpc.insecure_channel(CONN_TARGET)
self._stub = calculator_pb2_grpc.CalculatorStub(channel)
except grpc.RpcError as e:
logging.error(e)
def run():
channel = grpc.insecure_channel('localhost:50051')
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.Add(calculator_pb2.AddRequest(n1=1, n2=2))
print("1 + 2 = %d" % response.message)
def run():
with grpc.insecure_channel('localhost:50052') as channel:
#stub = calculator_pb2_grpc.CalculatorStub(channel)
#response = stub.AddAB(calculator_pb2.NumberRequest(a=12,b=13))
#print(response.value)
print("Sum of a=12 and b =13 is : ", calculator_pb2_grpc.CalculatorStub(channel).AddAB(calculator_pb2.NumberRequest(a=12,b=13)).value)
# import the generated classes
import time
import calculator_pb2
import calculator_pb2_grpc
import grpc
clients = []
# open a gRPC channel
channel = grpc.insecure_channel('localhost:50051')
for i in range(500):
# create a stub (client)
clients.append(calculator_pb2_grpc.CalculatorStub(channel))
# create a valid request message
number = calculator_pb2.Number(value=16)
begintime = time.time()
for client in clients:
# make the call
response = client.SquareRoot(number)
# et voilà
# print(response.value)
duration = time.time() - begintime
print("took: %s sec." % duration)
def run():
with grpc.insecure_channel('localhost:50051') as channel:
stub = calculator_pb2_grpc.CalculatorStub(channel)
response = stub.add(calculator_pb2.AddRequest(a=4, b=8))
print(f"The sum of 4 and 8 is {response.c}")
import calculator_pb2
import calculator_pb2_grpc
import grpc
comm_line = grpc.insecure_channel('localhost:50051')
stub = calculator_pb2_grpc.CalculatorStub(comm_line)
inputs = calculator_pb2.InputNumber(num_one=10, num_two=15)
output = stub.AddNumber(inputs)
print(output.res_num)
