def mill_temples(outdir, temples, order):
#TODO: Replace with information in materials database
print 'Creating milling program for temples'
top_thickness = 4 # Assume 4mm temple
top_raw = 4
if order.get("temple_material"):
top_raw = order["temple_material"].get("top_raw_thickness") or order["temple_material"].get("top_thickness") or top_thickness
print 'top raw', top_raw
# Automatically determine some surfacing. The bottom thickness
# is a lamination and should be thin. It should be thinned to 1mm.
# The top should be thinned to bring total finished thickness to 6mm or less.
thin_back = 0
if top_raw > top_thickness:
thin_back = top_raw - top_thickness
l_temple = temples['left_temple_contour']
r_temple = temples['right_temple_contour']
offset = frame_offset(l_temple)
# Calculate entry points for bevelling operation
program = [
cam.setup(),
cam.select_fixture("blank_clamp"),
cam.retract_spindle(),
cam.rapid([0,0]),
cam.activate_pin("stock_clamp"),
surface_back(thin_back),
index_holes(top_raw),
# cam.rapid(l_temple[0]+[0]),
# cam.contour(l_temple, True),
# cam.move(l_temple[0]),
# cam.rapid(r_temple[0]),
# cam.contour(r_temple, True),
rough_temple_bevel(l_temple, thin_back),
rough_temple_bevel(r_temple, thin_back),
cam.change_tool("1/16in endmill"),
cam.rapid([0,0]),
temple_hinge_pockets(temples, thin_back),
cam.change_tool("dovetail"),
bevel_temple(l_temple, thin_back),
bevel_temple(r_temple, thin_back),
temple_hinge_clearance(l_temple, thin_back),
temple_hinge_clearance(r_temple, thin_back),
cam.retract_spindle(),
cam.deactivate_pin("stock_clamp"),
cam.change_tool("1/8in endmill"),
cam.end_program()
]
open(outdir + "/temples_milling.ngc", "w").write(to_string(program))
def face_hinge_pockets(hinge_num, xposition, yposition):
left_hinge = hinges.get_hinge(hinge_num)
right_hinge = hinges.get_hinge(hinge_num, False)
left_translate = [xposition, -yposition]
#left_translate = [xposition, 0]
right_translate = [xposition, yposition]
#right_translate = [xposition, 0]
# Adjust by pocket depth of hinge
pocket_depth = left_hinge['pocket_depth']
left_contour = poly.translate(left_hinge["face_contour"], left_translate[0], left_translate[1])
right_contour = poly.translate(right_hinge["face_contour"], right_translate[0], right_translate[1])
left_holes = poly.translate(left_hinge["face_holes"], left_translate[0], left_translate[1])
right_holes = poly.translate(right_hinge["face_holes"], right_translate[0], right_translate[1])
if not poly.is_ccw(left_contour):
left_contour = poly.reverse(left_contour)
if not poly.is_ccw(right_contour):
right_contour = poly.reverse(right_contour)
left_hinge_pocket_contours = [];
while len(left_contour) > 0:
left_contour = poly.erode(1.5875/2, left_contour)
if len(left_contour) > 0:
left_contour = left_contour[0]
left_hinge_pocket_contours.append(left_contour)
right_hinge_pocket_contours = [];
while len(right_contour) > 0:
right_contour = poly.erode(1.5875/2, right_contour)
if len(right_contour) > 0:
right_contour = right_contour[0]
right_hinge_pocket_contours.append(right_contour)
r = [
cam.comment("Hinge Pockets"),
cam.feedrate(750),
cam.change_tool("1/16in endmill"),
cam.start_spindle(15000),
cam.dwell(3),
cam.comment("Right Hinge Pocket"),
cam.pocket(right_hinge_pocket_contours, -abs(right_hinge['pocket_depth']), retract=0),
cam.rapid([None, None, 20.0]),
cam.comment("Left Hinge Pocket"),
cam.pocket(left_hinge_pocket_contours, -abs(left_hinge['pocket_depth']), retract=0),
cam.rapid([None, None, 20.0]),
cam.comment("Hinge Holes"),
cam.change_tool("1mm drill"),
cam.start_spindle(4500),
cam.dwell(2),
[cam.rmp(p + [-8.0], retract=10.0) for p in right_holes],
[cam.rmp(p + [-8.0], retract=10.0) for p in left_holes],
cam.rapid([None, None, 20.0]),
]
return r
def temple_hinge_pockets(temples):
# We're operating in a 90 degree rotated fixture
#l_hinge = poly.rotate_90(temples["left_hinge_contour"])
#r_hinge = poly.rotate_90(temples["right_hinge_contour"])
l_hinge = temples["left_hinge_contour"]
r_hinge = temples["right_hinge_contour"]
if not poly.is_ccw(l_hinge):
l_hinge = poly.reverse(l_hinge)
if not poly.is_ccw(r_hinge):
r_hinge = poly.reverse(r_hinge)
left_hinge_pocket_contours = [];
while len(l_hinge) > 0:
l_hinge = poly.erode(1.5875/2, l_hinge)
if len(l_hinge) > 0:
l_hinge = l_hinge[0]
left_hinge_pocket_contours.append(l_hinge)
right_hinge_pocket_contours = [];
while len(r_hinge) > 0:
r_hinge = poly.erode(1.5875/2, r_hinge)
if len(r_hinge) > 0:
r_hinge = r_hinge[0]
right_hinge_pocket_contours.append(r_hinge)
r = [
cam.comment("Hinge Pockets"),
cam.feedrate(750),
cam.change_tool("1/16in endmill"),
cam.start_spindle(15000),
cam.dwell(3),
cam.comment("Right Hinge Pocket"),
cam.pocket(right_hinge_pocket_contours, -abs(temples['pocket_depth']), retract=0),
cam.rapid([None, None, 20.0]),
cam.comment("Left Hinge Pocket"),
cam.pocket(left_hinge_pocket_contours, -abs(temples['pocket_depth']), retract=0),
cam.rapid([None, None, 20.0]),
cam.comment("Hinge Holes"),
cam.change_tool("1mm drill"),
cam.start_spindle(4500),
cam.dwell(2),
[cam.rmp(p + [-8.0], retract=10.0) for p in temples['right_hinge_holes']],
[cam.rmp(p + [-8.0], retract=10.0) for p in temples['left_hinge_holes']],
cam.rapid([None, None, 20.0]),
cam.move([None, None, 0]),
cam.contour(poly.rotate_90(temples['left_temple_contour']), True),
cam.contour(poly.rotate_90(temples['right_temple_contour']), True),
]
return r
def rough_temple_bevel(temple, thinning):
p1 = extendLine(temple[-1], temple[-2], 3.175/2 - 0.5)
p2 = extendLine(temple[0], temple[1], 3.175/2 - 0.5)
p3 = extendLine(temple[0], temple[1], 15)
p4 = extendLine(temple[-1], temple[-2], 15) # room for dovetail
# p1 and p2 are just extensions of the temple - move them to the side a bit to
# clearance for when the dovetail cutter comes through
p1 = extendLine(p1, p2, 3)
p2 = extendLine(p2, p1, 3)
p3 = extendLine(p3, p4, 3)
p4 = extendLine(p4, p3, 3)
# Move to the dovetail cutter entry point, helix through stock.
# Cut a circle big enough to admit the dovetail cutter.
# Rough cut the end of the temple
# Clear a return path for the dovetail cutter.
return [
cam.change_tool("1/8in endmill"),
cam.feedrate(1000),
cam.rmh(p4 + [-5-thinning], 1, pitch=1),
cam.move(p1),
cam.move(p2),
cam.move(p3),
cam.move(p4),
cam.rapid(p4 + [10])
]
def mill_temples(outdir, temples, temple_length):
#TODO: Replace with information in materials database
front_surface_thickness = 0
back_surface_thickness = 4
final_front_thickness = 0
final_back_thickness = 4
thickness = final_front_thickness + final_back_thickness
front_surface_removal = final_front_thickness - front_surface_thickness
back_surface_removal = final_back_thickness - back_surface_thickness
r_temple = poly.rotate_90(temples['right_temple_contour'])
l_temple = poly.rotate_90(temples['left_temple_contour'])
offset = frame_offset(l_temple)
program = [
cam.setup(),
cam.select_fixture("blank_clamp"),
cam.retract_spindle(),
cam.activate_pin("stock_clamp"),
surface_front(front_surface_removal),
surface_back(back_surface_removal),
cam.change_tool("1/16in endmill"),
cam.rapid([0,0]),
cam.temporary_offset(offset),
temple_hinge_pockets(temples),
index_holes([l_temple, r_temple], thickness),
#thin_temples([l_temple, r_temple], temple_length),
]
open(outdir + "/temples_milling.ngc", "w").write(to_string(program))
def bevel_temple_ends(path1, path2, thinning):
depth = -4 - thinning
# Assume a 14 degree dovetail cutter, cutting 5mm from bottom
dovetail_offset = 12.35/2 - 1.25
return [
cam.comment("Bevel temple ends"),
cam.change_tool("dovetail"),
cam.start_spindle(20000),
cam.feedrate(750),
cam.rapid(path1[0]),
cam.rapid([None, None, depth]),
cam.move(path1[1]),
cam.move(path1[2]),
cam.move(path1[0]),
cam.rapid([None, None, 10]),
cam.rapid(path2[0]),
cam.rapid([None, None, depth]),
cam.move(path2[1]),
cam.move(path2[2]),
cam.move(path2[0]),
cam.move([None, None, 20])
]
def surface_back(amount):
if amount < 0.1:
return None
print 'surfacing back with', amount
surface_amount = min(amount, 4)
surface_heights = []
while surface_amount <= amount:
surface_heights.append(surface_amount);
print surface_heights
surface_amount = max(surface_amount+2, amount)
print "surface amounts on back", surface_heights
return [
cam.comment("Surface back by %f mm" % amount),
cam.change_tool("3/8in endmill"),
cam.spindle_speed(15000),
cam.feedrate(1500),
cam.start_spindle(),
cam.dwell(5),
cam.surface_along_y(-40, -110, 40, 110, 4.7625, -amount),
cam.rapid([None, None, 20]),
] if amount > 0 else None
program = [
cam.comment("Surface back by %f mm" % amount),
cam.change_tool("3/8in endmill"),
cam.spindle_speed(20000),
cam.feedrate(2000),
cam.start_spindle(),
cam.dwell(5),
]
for height in surface_heights:
program = program + cam.surface_along_y(-40, -110, 40, 110, 4.7625, -height),
program = program + [
cam.stop_spindle(),
cam.retract_spindle(),
]
return program
def mill_hinges(outdir):
"""Creates the g-code for the first milling operation. The
first milling operation is done on an unregistered plastic blank,
so includes creating registration holes for subsequent operations."""
y_offsets = [y*15 for y in range(-5, 6)]
x_offsets = [x*7 for x in range(-3, 4)]
hinge = hinges.get_hinge(2);
contour = hinge['face_contour']
contours = []
erode = poly.erode(1.5875/2, contour)
while len(erode) > 0:
if len(erode) >= 1:
contours.append(erode[0])
else:
break
erode = poly.erode(1.5875/2, contours[-1])
program = [
cam.setup(),
cam.select_fixture("blank_clamp"),
cam.retract_spindle(),
cam.activate_pin("stock_clamp"),
cam.change_tool("1/16in endmill"),
cam.rapid([0,0]),
cam.start_spindle(20000),
cam.dwell(3),
# cam.pocket(contours, -1, -1),
# cam.rapid([None, None, 20.0]),
# cam.change_tool("1mm drill"),
# cam.start_spindle(4500),
# [cam.rmp(p + [-2.5], retract=10.0) for p in hinge['face_holes']],
]
for y_offset in y_offsets:
for x_offset in x_offsets:
program += [
cam.rapid([x_offset, y_offset]),
cam.temporary_offset((0,0)),
cam.pocket(contours, -1.2, -1.2),
cam.rapid([None, None, 20.0]),
cam.remove_temporary_offset(),
]
# program += [
# cam.change_tool("1mm drill"),
# cam.start_spindle(4500),
# ]
# for y_offset in y_offsets:
# for x_offset in x_offsets:
# program += [
# cam.rapid([x_offset, y_offset]),
# cam.temporary_offset((0,0)),
# [cam.rmp(p + [-2.5], retract=10.0) for p in hinge['face_holes']],
# cam.rapid([None, None, 20.0]),
# cam.remove_temporary_offset(),
# ]
program += [
cam.deactivate_pin("stock_clamp"),
cam.end_program(),
]
open(outdir + "/face_stage1.ngc", "w").write(to_string(program))
def temple_hinge_pockets(temples, thinned):
# We're operating in a 90 degree rotated fixture
#l_hinge = poly.rotate_90(temples["left_hinge_contour"])
#r_hinge = poly.rotate_90(temples["right_hinge_contour"])
print 'Generating temple hinge pockets'
l_hinge = temples["left_hinge_contour"]
r_hinge = temples["right_hinge_contour"]
if not poly.is_ccw(l_hinge):
l_hinge = poly.reverse(l_hinge)
if not poly.is_ccw(r_hinge):
r_hinge = poly.reverse(r_hinge)
#pocket_depth = temples['pocket_depth'] + thinned
pocket_depth = 1 + thinned;
def pocket_contours(contour):
contours = []
erode = poly.erode(1.5875/2, contour)
making_progress = True
while len(erode) > 0 and making_progress:
making_progress = False
for path in erode:
if len(path) > 5:
making_progress = True
contours.append(path)
erode = poly.erode(1.5875/2, contours[-1])
return contours
left_hinge_pocket_contours = pocket_contours(l_hinge)
right_hinge_pocket_contours = pocket_contours(r_hinge)
# left_hinge_pocket_contours = [];
# while len(l_hinge) > 0:
# l_hinge = poly.erode(1.5875/2, l_hinge)
# if len(l_hinge) > 0:
# l_hinge = l_hinge[0]
# left_hinge_pocket_contours.append(l_hinge)
# right_hinge_pocket_contours = [];
# while len(r_hinge) > 0:
# r_hinge = poly.erode(1.5875/2, r_hinge)
# if len(rhinge_) == 1:
# right_hinge_pocket
# if len(r_hinge) > 0:
# r_hinge = r_hinge[0]
# right_hinge_pocket_contours.append(r_hinge)
r = [
cam.comment("Hinge Pockets"),
cam.feedrate(750),
cam.change_tool("1/16in endmill"),
cam.start_spindle(22000),
cam.dwell(5),
cam.comment("Right Hinge Pocket"),
cam.pocket(right_hinge_pocket_contours, -abs(pocket_depth), retract=0),
cam.rapid([None, None, 20.0]),
cam.comment("Left Hinge Pocket"),
cam.pocket(left_hinge_pocket_contours, -abs(pocket_depth), retract=0),
cam.rapid([None, None, 20.0]),
cam.comment("Hinge Holes"),
cam.change_tool("1mm drill"),
cam.start_spindle(5000),
cam.dwell(2),
[cam.rmp(p + [-8.0], retract=10.0) for p in temples['right_hinge_holes']],
[cam.rmp(p + [-8.0], retract=10.0) for p in temples['left_hinge_holes']],
cam.rapid([None, None, 20.0]),
]
return r
def face_hinge_pockets(hinge_num, hinge_height, temple_position, centering_shift, thin_back):
print 'Generating face hinge pockets', hinge_num
xposition = hinge_height;
yposition = temple_position+3.0; # 4mm for the temple, but less 1mm for temple hinge pocket
print 'Position is ', xposition, yposition
left_hinge = hinges.get_hinge(hinge_num)
print 'Got left hinge'
right_hinge = hinges.get_hinge(hinge_num, False)
print 'Retrieved hinge contours'
left_translate = [xposition, yposition]
right_translate = [xposition, -yposition]
print 'Calculated hinge translations'
#right_translate = [xposition, 0]
# Adjust by pocket depth of hinge
#pocket_depth = left_hinge['pocket_depth']+thin_back
pocket_depth = 1 + thin_back
drill_depth = -thin_back - 2.0
left_contour = poly.mirror_x(poly.rotate_90(left_hinge["face_contour"]), False)
right_contour = poly.mirror_x(poly.rotate_90(right_hinge["face_contour"]), False)
left_holes = poly.mirror_x(poly.rotate_90(left_hinge["face_holes"]), False)
right_holes = poly.mirror_x(poly.rotate_90(right_hinge["face_holes"]), False)
left_contour = poly.translate(left_contour, left_translate[0], -left_translate[1])
right_contour = poly.translate(right_contour, right_translate[0], -right_translate[1])
left_holes = poly.translate(left_holes, left_translate[0], -left_translate[1])
right_holes = poly.translate(right_holes, right_translate[0], -right_translate[1])
# Now center everything on the stock
left_contour = poly.translate(left_contour, centering_shift[0], -centering_shift[1])
right_contour = poly.translate(right_contour, centering_shift[0], -centering_shift[1])
left_holes = poly.translate(left_holes, centering_shift[0], -centering_shift[1])
right_holes = poly.translate(right_holes, centering_shift[0], -centering_shift[1])
if not poly.is_ccw(left_contour):
left_contour = poly.reverse(left_contour)
if not poly.is_ccw(right_contour):
right_contour = poly.reverse(right_contour)
left_hinge_pocket_contours = [];
while len(left_contour) > 0:
left_contour = poly.erode(1.5875/2, left_contour)
if len(left_contour) > 0:
left_contour = left_contour[0]
left_hinge_pocket_contours.append(left_contour)
right_hinge_pocket_contours = [];
while len(right_contour) > 0:
right_contour = poly.erode(1.5875/2, right_contour)
if len(right_contour) > 0:
right_contour = right_contour[0]
right_hinge_pocket_contours.append(right_contour)
r = [
cam.comment("Hinge Pockets"),
cam.feedrate(750),
cam.change_tool("1/16in endmill"),
cam.start_spindle(20000),
cam.dwell(3),
cam.comment("Right Hinge Pocket"),
cam.pocket(right_hinge_pocket_contours, -abs(pocket_depth), retract=-abs(pocket_depth)),
cam.rapid([None, None, 20.0]),
cam.comment("Left Hinge Pocket"),
cam.pocket(left_hinge_pocket_contours, -abs(pocket_depth), retract=-abs(pocket_depth)),
cam.rapid([None, None, 20.0]),
cam.comment("Hinge Holes"),
cam.change_tool("1mm drill"),
cam.start_spindle(5000),
cam.dwell(2),
[cam.rmp(p + [drill_depth], retract=10.0) for p in right_holes],
[cam.rmp(p + [drill_depth], retract=10.0) for p in left_holes],
cam.rapid([None, None, 20.0]),
]
return r
def mill_fronts(outdir, order):
"""Creates the g-code for the first milling operation. The
first milling operation is done on an unregistered plastic blank,
so includes creating registration holes for subsequent operations."""
# Initial thickness of the forward-facing lamination. 0 if no lamination.
top_thickness = 6
bottom_thickness = 0
top_raw = 6
bottom_raw = 0
if order.get("face_material"):
top_thickness = order["face_material"].get("top_thickness")
bottom_thickness = order["face_material"].get("bottom_thickness") or 0
top_raw = order["face_material"].get("top_raw_thickness") or top_thickness
bottom_raw = order["face_material"].get("bottom_raw_thickness") or bottom_thickness
frame_thickness = top_thickness + bottom_thickness
machining_z_offset = bottom_raw - bottom_thickness
# top_thickness = 6
# bottom_thickness = 0
# total_thickness = 6
# top_raw = 0
# Automatically determine some surfacing. The bottom thickness
# is a lamination and should be thin. It should be thinned to 1mm.
# The top should be thinned to bring total finished thickness to 6mm or less.
thin_back = 0
if bottom_raw > bottom_thickness:
thin_back = bottom_raw - bottom_thickness
thin_front = 0
if top_raw > top_thickness:
thin_front = top_raw - top_thickness
# The machine has the stock clamp oriented 90 degrees to the way the
# software creates the contours.
face_c = poly.rotate_90(order["face_con"])
left_lens_c = poly.rotate_90(order["lhole_con"])
right_lens_c = poly.mirror_y(left_lens_c, True)
face_c = face_c + poly.reverse(poly.mirror_y(face_c, False))[1:]
temple_height = abs(order["ltemple_con"][0][1] - order["ltemple_con"][-1][1])
msg = check_frame_size(left_lens_c)
if msg:
print msg
sys.exit(1)
# Instead of offset, we'll make sure this thing is centered on the stock
offset = frame_offset(face_c)
top = poly.top(face_c)
bottom = poly.bottom(face_c)
left = poly.left(face_c)
right = poly.right(face_c)
print 'frame bounding box: ', top, bottom, left, right
y_shift = (top + bottom)/2
x_shift = (left + right)/2
print 'x and y shift', x_shift, y_shift
face_c = poly.translate(face_c, -x_shift, -y_shift)
left_lens_c = poly.translate(left_lens_c, -x_shift, -y_shift)
right_lens_c = poly.translate(right_lens_c, -x_shift, -y_shift)
# Groove for lenses is 2/3 of the distance from back to front.
# Here we're calculating the actual cutting depth so we need to add
# back the material that we surfaced away from the back.
groove_depth = -(float(machining_z_offset) + (2.0/3)*float(frame_thickness))
hinge_loc = order["ltemple_con"][0][1] - (order["ltemple_con"][0][1] - order["ltemple_con"][-1][1])/2
size_info = order.get('size_info')
if not size_info and order.get('usersizes'):
# Legacy order
size_info = order.get('usersizes')
size_info["noseradius"] = size_info["nose_radius"]
size_info["noseheight"] = size_info["nose_height"]
size_info["splayangle"] = size_info["nose_splayangle"]
size_info["ridgeangle"] = size_info["nose_ridgeangle"]
generic = not size_info or len(size_info) == 0
generic = True # TESTING
program = [
cam.setup(),
cam.select_fixture("blank_clamp"),
cam.retract_spindle(),
cam.activate_pin("stock_clamp"),
cam.rapid([0,0]),
surface_front(thin_front),
surface_back(thin_back),
cam.change_tool("1/8in endmill"),
cam.rapid([0, 0]),
# Note that X and Y parameters in the order are switched from our system
#TODO: replace the thickness offset with the thickness of the TEMPLE, not the fronts.
index_holes(frame_thickness+machining_z_offset),
lens_holes(left_lens_c, right_lens_c, frame_thickness + machining_z_offset),
lens_groove(left_lens_c, right_lens_c, groove_depth),
# rough_nose_contour(
# float(size_info["noseradius"]),
# float(size_info["noseheight"]),
# float(size_info["splayangle"]),
# float(size_info["ridgeangle"]),
# face_c, frame_thickness, machining_z_offset, -x_shift ),
face_hinge_pockets(order.get("lhinge") or 1, hinge_loc, order["ltemple_x"], (-x_shift, -y_shift), machining_z_offset),
#nose_pads(order, thickness),
nose_contour(
float(size_info["noseradius"]),
float(size_info["noseheight"]),
float(size_info["splayangle"]),
float(size_info["ridgeangle"]),
face_c, frame_thickness, machining_z_offset, -x_shift ),
# nose_contour(
# 7.0, 8.0, 30.0, 32.0, face_c, frame_thickness, machining_z_offset, -x_shift),
#generic_nose_contour(face_c, frame_thickness, machining_z_offset, -x_shift),
cam.retract_spindle(),
cam.deactivate_pin("stock_clamp"),
cam.change_tool("1/8in endmill"),
# cam.rapid([face_c[0][0], face_c[0][1], -thin_back] ),
# cam.contour(face_c, True),
cam.end_program(),
]
print 'Writing face milling program to ', outdir + "/face_stange1.ngc"
open(outdir + "/face_stage1.ngc", "w").write(to_string(program))
def mill_lenses(outdir, order):
def to_polar(polyline):
return [[-math.sqrt(p[0]**2 + p[1]**2), math.degrees(math.atan2(p[1],p[0])) + 180] for p in polyline]
""" Creates g-code for milling the left and right lenses for the frames."""
lens = g.Polygon(order['lhole_con'])
x = lens.bounding_box()
box = lens.bounding_box()
center = g.Point((box.p2.x+box.p1.x)/2, (box.p2.y+box.p1.y)/2)
shift_to_origin = g.Vector(-center.x, -center.y)
lens = g.translate_polygon(lens, shift_to_origin)
polar = g.polygon_to_uniform_polar(lens, 1500)
# Inflate the polar form by 1/2 the diameter of the cutter, and convert
# the angles to degrees
tau = math.pi * 2
conv = 360/tau
roughing = [(pt.theta*conv, pt.r+4.77) for pt in polar]
# Expand for the roughing cut
# left_lens_rough = poly.dilate(4.77, left_lens)
# Convert to polar coordinates
# left_lens_roughing_polar = to_polar(left_lens_rough)
# Start the cut from 0 degrees
# angle_list = [p[1] for p in left_lens_roughing_polar]
# zero_idx = angle_list.index(min(angle_list))
# left_lens_roughing_polar = left_lens_roughing_polar[zero_idx:] + left_lens_roughing_polar[:zero_idx]
# Cut it down to every 0.2 degrees
# coarse = []
# for idx, pt in enumerate(left_lens_roughing_polar):
# if idx == 0 or (pt[1]-coarse[-1][1]) >= 0.2:
# coarse.append(pt)
# The polar distances aren't correct quite. That's because the conversion assumed a flat
# surface, but we'll actually be bending that contour around a sphere. The lens is already
# spherical. So we need to adjust inwards a bit to account for the x distance actually being an arc
# distance.
# The radius of the sphere is 88mm (base 6 lens). ArcLength = Radius * angle, and chord
# length is sin(angle) * radius.
roughing = [(p[0], math.sin(-p[1]/88) * 88) for p in roughing]
roughing.sort(key=lambda pt: pt[0])
closest = max([p[1] for p in roughing])
if abs(closest) < 22.5:
print "Error! Cannot cut lens, it's too small.", closest
roughing_reversed = [[-1*(math.degrees(-math.radians(p[1]))+360), p[1]] for p in roughing]
program = [
cam.setup(),
cam.select_fixture("lens_clamp"),
cam.retract_spindle(),
cam.change_tool("1/4in endmill"),
cam.start_spindle(20000),
cam.rapid([-50, 0]),
["G1 Z0 F500"],
cam.polar_contour(roughing),
["G1 X-50"],
["G1 A0"],
cam.stop_spindle(),
cam.retract_spindle(),
cam.end_program(),
]
open(outdir + "/left_lens.ngc", "w").write(to_string(program))
program = [
cam.setup(),
cam.select_fixture("lens_clamp"),
cam.retract_spindle(),
cam.change_tool("1/4in endmill"),
cam.start_spindle(20000),
cam.rapid([-50, 0]),
["G1 Z0 F500"],
cam.polar_contour(roughing_reversed),
["G1 X-50"],
["G1 A0"],
cam.stop_spindle(),
cam.retract_spindle(),
cam.end_program(),
]
open(outdir + "/right_lens.ngc", "w").write(to_string(program))
def mill_fronts(outdir, order):
"""Creates the g-code for the first milling operation. The
first milling operation is done on an unregistered plastic blank,
so includes creating registration holes for subsequent operations."""
#TODO: Replace with information in materials database
# Initial thickness of the forward-facing lamination. 0 if no lamination.
front_surface_thickness = 0
# The final desired thickness of the fronto facing lamination. Must
# be equal to or less than the front_surface_thickness.
final_front_thickness = 0
# Initial thickness of the face side lamination. Use this thickness only if
# stock is solid
back_surface_thickness = 4
# The final thickness of the left and right extremes of the frame where the
# hinge will go. Must be equal to or less than back_surface_thickness.
hinge_thickness = 4
# The thickness of the highest point of the nosepad
nosepad_thickness = 4
# Final thickness of the main part of the frame. Must be equal to or less than
# the back_surface_thickness.
final_back_thickness = 4
thickness = final_front_thickness + final_back_thickness
front_surface_removal = final_front_thickness - front_surface_thickness
back_surface_removal = final_back_thickness - back_surface_thickness
# The machine has the stock clamp oriented 90 degrees to the way the
# software creates the contours.
face_c = poly.rotate_90(order["face_con"])
left_lens_c = poly.rotate_90(order["lhole_con"])
right_lens_c = poly.rotate_90(order["rhole_con"])
temple_height = abs(order["ltemple_con"][0][1] -
order["ltemple_con"][-1][1])
msg = check_frame_size(face_c)
if msg:
print msg
sys.exit(0)
print 'milling front with hinge', order['lhinge'], order['rhinge']
offset = frame_offset(face_c)
groove_height = back_surface_removal + (thickness / 2)
print 'groove', groove_height, back_surface_removal, (thickness / 2)
program = [
cam.setup(),
cam.select_fixture("blank_clamp"),
cam.retract_spindle(),
cam.activate_pin("stock_clamp"),
surface_front(front_surface_removal),
# surface_back(back_surface_removal),
cam.change_tool("1/8in endmill"),
cam.rapid([0, 0]),
cam.temporary_offset(offset),
# Note that X and Y parameters in the order are switched from our system
#TODO: replace the thickness offset with the thickness of the TEMPLE, not the fronts.
index_holes([face_c], back_surface_thickness),
lens_holes(left_lens_c, right_lens_c, back_surface_thickness),
lens_groove(left_lens_c, right_lens_c,
back_surface_removal - (thickness / 2)),
# contour_face(
# back_surface_removal,
# back_surface_thickness - hinge_thickness,
# back_surface_thickness - nosepad_thickness,
# temple_height,
# face_c, left_lens_c, order['lhinge_y']),
face_hinge_pockets(order["lhinge"], order["lhinge_y"],
order["ltemple_x"]),
# nose_pads(order, thickness),
nose_contour(order["nose_rad"], order["nose_h"], order["nose_sa"],
order["nose_ra"], face_c, back_surface_thickness),
cam.retract_spindle(),
cam.deactivate_pin("stock_clamp"),
cam.end_program(),
]
open(outdir + "/face_stage1.ngc", "w").write(to_string(program))
def mill_fronts(outdir, order):
"""Creates the g-code for the first milling operation. The
first milling operation is done on an unregistered plastic blank,
so includes creating registration holes for subsequent operations."""
#TODO: Replace with information in materials database
# Initial thickness of the forward-facing lamination. 0 if no lamination.
front_surface_thickness = 0
# The final desired thickness of the fronto facing lamination. Must
# be equal to or less than the front_surface_thickness.
final_front_thickness = 0
# Initial thickness of the face side lamination. Use this thickness only if
# stock is solid
back_surface_thickness = 4
# The final thickness of the left and right extremes of the frame where the
# hinge will go. Must be equal to or less than back_surface_thickness.
hinge_thickness = 4
# The thickness of the highest point of the nosepad
nosepad_thickness = 4
# Final thickness of the main part of the frame. Must be equal to or less than
# the back_surface_thickness.
final_back_thickness =4
thickness = final_front_thickness + final_back_thickness
front_surface_removal = final_front_thickness - front_surface_thickness
back_surface_removal = final_back_thickness - back_surface_thickness
# The machine has the stock clamp oriented 90 degrees to the way the
# software creates the contours.
face_c = poly.rotate_90(order["face_con"])
left_lens_c = poly.rotate_90(order["lhole_con"])
right_lens_c = poly.rotate_90(order["rhole_con"])
temple_height = abs(order["ltemple_con"][0][1] - order["ltemple_con"][-1][1])
msg = check_frame_size(face_c)
if msg:
print msg
sys.exit(0)
print 'milling front with hinge', order['lhinge'], order['rhinge']
offset = frame_offset(face_c)
groove_height = back_surface_removal + (thickness/2)
print 'groove', groove_height, back_surface_removal, (thickness/2)
program = [
cam.setup(),
cam.select_fixture("blank_clamp"),
cam.retract_spindle(),
cam.activate_pin("stock_clamp"),
surface_front(front_surface_removal),
# surface_back(back_surface_removal),
cam.change_tool("1/8in endmill"),
cam.rapid([0, 0]),
cam.temporary_offset(offset),
# Note that X and Y parameters in the order are switched from our system
#TODO: replace the thickness offset with the thickness of the TEMPLE, not the fronts.
index_holes([face_c], back_surface_thickness),
lens_holes(left_lens_c, right_lens_c, back_surface_thickness),
lens_groove(left_lens_c, right_lens_c, back_surface_removal - (thickness/2)),
# contour_face(
# back_surface_removal,
# back_surface_thickness - hinge_thickness,
# back_surface_thickness - nosepad_thickness,
# temple_height,
# face_c, left_lens_c, order['lhinge_y']),
face_hinge_pockets(order["lhinge"], order["lhinge_y"], order["ltemple_x"]),
# nose_pads(order, thickness),
nose_contour(order["nose_rad"], order["nose_h"], order["nose_sa"], order["nose_ra"], face_c, back_surface_thickness),
cam.retract_spindle(),
cam.deactivate_pin("stock_clamp"),
cam.end_program(),
]
open(outdir + "/face_stage1.ngc", "w").write(to_string(program))
