def test_save_load():
composition_fd = dict(
n2=0.4,
co2=0.22,
methane=92.11,
ethane=4.94,
propane=1.71,
ibutane=0.24,
butane=0.3,
ipentane=0.04,
pentane=0.03,
hexane=0.01,
)
suc_fd = State.define(p=Q_(3876, "kPa"), T=Q_(11, "degC"), fluid=composition_fd)
test_dir = Path(__file__).parent
curve_path = test_dir / "data"
curve_name = "normal"
imp_fd = Impeller.load_from_engauge_csv(
suc=suc_fd,
curve_name=curve_name,
curve_path=curve_path,
b=Q_(10.6, "mm"),
D=Q_(390, "mm"),
number_of_points=6,
flow_units="kg/h",
head_units="kJ/kg",
)
file = Path(tempdir) / "imp.toml"
imp_fd.save(file)
imp_fd_loaded = Impeller.load(file)
assert imp_fd == imp_fd_loaded
def points0():
# see Ludtke pg. 173 for values.
fluid = dict(
n2=0.0318,
co2=0.0118,
methane=0.8737,
ethane=0.0545,
propane=0.0178,
ibutane=0.0032,
nbutane=0.0045,
ipentane=0.0011,
npentane=0.0009,
nhexane=0.0007,
)
suc = State.define(p=Q_(62.7, "bar"), T=Q_(31.2, "degC"), fluid=fluid)
disch = State.define(p=Q_(76.82, "bar"), T=Q_(48.2, "degC"), fluid=fluid)
disch1 = State.define(p=Q_(76.0, "bar"), T=Q_(48.0, "degC"), fluid=fluid)
p0 = Point(
suc=suc,
disch=disch,
flow_m=85.9,
speed=Q_(13971, "RPM"),
b=Q_(44.2, "mm"),
D=0.318,
)
p1 = Point(
suc=suc,
disch=disch1,
flow_m=86.9,
speed=Q_(13971, "RPM"),
b=Q_(44.2, "mm"),
D=0.318,
)
return p0, p1
def impeller_example():
test_dir = Path(__file__).parent / "tests"
data_dir = test_dir / "data"
suc = State.define(
p=Q_(4.08, "bar"),
T=Q_(33.6, "degC"),
fluid={
"METHANE": 58.976,
"ETHANE": 3.099,
"PROPANE": 0.6,
"N-BUTANE": 0.08,
"I-BUTANE": 0.05,
"N-PENTANE": 0.01,
"I-PENTANE": 0.01,
"NITROGEN": 0.55,
"HYDROGEN SULFIDE": 0.02,
"CARBON DIOXIDE": 36.605,
},
)
imp = Impeller.load_from_engauge_csv(
suc=suc,
curve_name="lp-sec1-caso-a",
curve_path=data_dir,
b=Q_(5.7, "mm"),
D=Q_(550, "mm"),
head_units="kJ/kg",
flow_units="m³/h",
number_of_points=7,
)
return imp
def imp3():
# faster to load than impeller_example
composition_fd = dict(
n2=0.4,
co2=0.22,
methane=92.11,
ethane=4.94,
propane=1.71,
ibutane=0.24,
butane=0.3,
ipentane=0.04,
pentane=0.03,
hexane=0.01,
)
suc_fd = State.define(p=Q_(3876, "kPa"), T=Q_(11, "degC"), fluid=composition_fd)
test_dir = Path(__file__).parent
curve_path = test_dir / "data"
curve_name = "normal"
imp3 = Impeller.load_from_engauge_csv(
suc=suc_fd,
curve_name=curve_name,
curve_path=curve_path,
b=Q_(10.6, "mm"),
D=Q_(390, "mm"),
number_of_points=6,
flow_units="kg/h",
head_units="kJ/kg",
)
return imp3
def __call__(self, *args, **kwargs):
curve_state_object = self.curve_state_object
attr = self.attr
values = getattr(curve_state_object, attr)
if callable(values):
values = values()
units = values.units
if len(values) < 3:
interpolation_degree = 1
else:
interpolation_degree = 3
interpol_function = interp1d(
curve_state_object.flow_v.magnitude,
values.magnitude,
kind=interpolation_degree,
fill_value="extrapolate",
)
try:
args = [arg.magnitude for arg in args]
except AttributeError:
pass
result = Q_(interpol_function(*args, **kwargs), units)
if isinstance(*args, (int, float)):
result = Q_(float(result.magnitude), result.units)
return result
def test_impeller_point(imp3):
p0 = imp3.point(flow_m=Q_(90184, "kg/h"), speed=Q_(9300, "RPM"))
assert_allclose(p0.eff, 0.782169, rtol=1e-4)
assert_allclose(p0.head, 97729.49349, rtol=1e-4)
assert_allclose(p0.power, 3130330.074989, rtol=1e-4)
# test interpolation warning
with pytest.warns(UserWarning) as record:
p0 = imp3.point(flow_m=Q_(70000, "kg/h"), speed=Q_(9300, "RPM"))
assert "Expected point is being extrapolated" in record[0].message.args[0]
def _calc_new_points(self):
"""Calculate new dimensional points based on the suction condition."""
# keep volume ratio constant
all_points = []
for curve in self.curves:
new_points = []
for point in curve:
new_points.append(self._calc_from_non_dimensional(point))
speed_mean = np.mean([p.speed.magnitude for p in new_points])
new_points = [
self._calc_from_speed(p, Q_(speed_mean, p.speed.units))
for p in new_points
]
all_points += new_points
self.new = self.__class__(
all_points,
b=self.b,
D=self.D,
_suc=self.new_suc,
_flow_v=self.flow_v,
_speed=self.speed,
)
def state():
State.define(rho=0.9280595769591103,
p=Q_(1, "bar"),
fluid={
"Methane": 0.5,
"Ethane": 0.5
})
def test_impeller_plot_units():
imp = impeller_example()
fig = imp.disch.rho_plot(
flow_v=Q_(20000, "m³/h"),
speed=Q_(8594, "RPM"),
flow_v_units="m³/h",
speed_units="RPM",
rho_units="g/cm³",
)
expected_rho_curve = np.array(
[
0.01104846,
0.01102079,
0.01099214,
0.01096187,
0.01092935,
0.01089396,
0.01085506,
0.01081202,
0.01076421,
0.010711,
0.01065176,
0.01058655,
0.01051647,
0.0104427,
0.01036643,
0.01028881,
0.01021025,
0.01013039,
0.01004887,
0.00996531,
0.00987906,
0.00978643,
0.00968174,
0.00955929,
0.00941338,
0.00923831,
0.00902836,
0.00877783,
0.00848102,
0.00813222,
]
)
assert_allclose(fig.data[5]["y"], expected_rho_curve, rtol=1e-4)
assert_allclose(fig.data[6]["y"], 0.008981, rtol=1e-4)
def __call__(self, *args, **kwargs):
values = []
for point in self.curve_state_object:
values.append(getattr(getattr(point, self.attr)(), "magnitude"))
units = getattr(getattr(point, self.attr)(), "units")
return Q_(values, units)
def __call__(self, *args, **kwargs):
impeller_state_object = self.impeller_state_object
attr = self.attr
values = []
for curve_state in impeller_state_object:
values.append(getattr(getattr(curve_state, attr)(), "magnitude"))
units = getattr(getattr(curve_state, attr)(), "units")
return Q_(values, units)
def test_univariate_spline():
test_dir = Path(__file__).parent
curve_path = test_dir / "data"
curve_name = "normal"
composition_fd = dict(
n2=0.4,
co2=0.22,
methane=92.11,
ethane=4.94,
propane=1.71,
ibutane=0.24,
butane=0.3,
ipentane=0.04,
pentane=0.03,
hexane=0.01,
)
suc_fd = State.define(p=Q_(3876, "kPa"), T=Q_(11, "degC"), fluid=composition_fd)
imp3 = Impeller.load_from_engauge_csv(
suc=suc_fd,
curve_name=curve_name,
curve_path=curve_path,
b=Q_(10.6, "mm"),
D=Q_(390, "mm"),
number_of_points=6,
flow_units="kg/h",
head_units="kJ/kg",
head_interpolation_method="UnivariateSpline",
eff_interpolation_method="UnivariateSpline",
)
p0 = imp3.point(flow_m=Q_(90184, "kg/h"), speed=Q_(9300, "RPM"))
assert_allclose(p0.eff, 0.782169, rtol=1e-2)
assert_allclose(p0.head, 97729.49349, rtol=1e-2)
assert_allclose(p0.power, 3130330.074989, rtol=1e-2)
def create_ccp_points():
composition_fd = dict(
n2=0.4,
co2=0.22,
methane=92.11,
ethane=4.94,
propane=1.71,
ibutane=0.24,
butane=0.3,
ipentane=0.04,
pentane=0.03,
hexane=0.01,
)
suc_fd = State.define(p=Q_(3876, "kPa"),
T=Q_(11, "degC"),
fluid=composition_fd)
test_dir = Path.home() / "ccp/ccp/tests"
curve_path = test_dir / "data"
curve_name = "normal"
imp_fd = Impeller.load_from_engauge_csv(
suc=suc_fd,
curve_name=curve_name,
curve_path=curve_path,
b=Q_(10.6, "mm"),
D=Q_(390, "mm"),
number_of_points=6,
flow_units="kg/hr",
head_units="kJ/kg",
)
new_fluid = {"co2": 0.7, "n2": 0.3}
new_suc = State.define(p=Q_(10, "bar"), T=Q_(40, "degC"), fluid=new_fluid)
imp_conv = Impeller.convert_from(imp_fd, suc=new_suc, find="speed")
def curve0():
suc = State.define(p=Q_(1, "bar"),
T=300,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
disch = State.define(p=Q_(2, "bar"),
T=370,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
disch1 = State.define(p=Q_(2.5, "bar"),
T=375,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
p0 = Point(suc=suc, disch=disch, flow_v=1, speed=1, b=1, D=1)
p1 = Point(suc=suc, disch=disch1, flow_v=2, speed=1, b=1, D=1)
return Curve([p0, p1])
def update_head(H):
global P_FD_eff
P_FD_eff = ccp.Point(speed=speed_FD,
flow_m=flow_m_FD,
suc=sucFD,
eff=eff_FD,
head=Q_(H, 'J/kg'),
b=b,
D=D)
P = P_FD_eff.disch.p().to('Pa').magnitude
return (P - Pd_FD.to('Pa').magnitude)
def __init__(self, points):
if len(points) < 2:
raise TypeError("At least 2 points should be given.")
self.points = sorted(points, key=lambda p: p.flow_v)
_flow_v_values = [p.flow_v.magnitude for p in self]
_flow_v_units = self[0].flow_v.units
self.flow_v = Q_(_flow_v_values, _flow_v_units)
self.speed = self[0].speed
# change the following check in the future
for point in self:
if self.speed != point.speed:
raise ValueError("Speed for each point should be equal")
self.suc = _CurveState([p.suc for p in self],
flow_v=self.flow_v,
speed=self.speed)
self.disch = _CurveState([p.disch for p in self],
flow_v=self.flow_v,
speed=self.speed)
for param in ["head", "eff", "power", "phi", "psi"]:
values = []
for point in self:
try:
values.append(getattr(getattr(point, param), "magnitude"))
units = getattr(getattr(point, param), "units")
except AttributeError:
continue
setattr(self, param, Q_(values, units))
interpol_func = interpolated_function(self, param)
setattr(self, f"{param}_interpolated", interpol_func)
plot = plot_func(self, param)
setattr(self, param + "_plot", plot)
def test_impeller_new_suction(imp1):
new_suc = State.define(
p=Q_(0.2, "MPa"), T=301.58, fluid={"n2": 1 - 1e-15, "co2": 1e-15}
)
imp2 = Impeller.convert_from(imp1, suc=new_suc, find="speed")
p0 = imp1[0]
new_p0 = imp2[0]
assert_allclose(new_p0.eff, p0.eff, rtol=1e-4)
assert_allclose(new_p0.phi, p0.phi, rtol=1e-2)
assert_allclose(new_p0.psi, p0.psi, rtol=1e-2)
assert_allclose(new_p0.head, 208933.668804, rtol=1e-2)
assert_allclose(new_p0.power, 1101698.5104, rtol=1e-2)
assert_allclose(new_p0.speed, 1257.17922, rtol=1e-3)
def curve1():
suc = State.define(p=Q_(1, "bar"),
T=300,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
disch = State.define(p=Q_(2, "bar"),
T=370,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
disch1 = State.define(p=Q_(2.5, "bar"),
T=375,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
disch2 = State.define(p=Q_(2.6, "bar"),
T=376,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
disch3 = State.define(p=Q_(2.7, "bar"),
T=377,
fluid={
"co2": 1 - 1e-15,
"n2": 1e-15
})
p0 = Point(suc=suc, disch=disch, flow_v=1, speed=1, b=1, D=1)
p1 = Point(suc=suc, disch=disch1, flow_v=2, speed=1, b=1, D=1)
p2 = Point(suc=suc, disch=disch2, flow_v=3, speed=1, b=1, D=1)
p3 = Point(suc=suc, disch=disch3, flow_v=4, speed=1, b=1, D=1)
return Curve([p0, p1, p2, p3])
def update_Re(Re):
global qm
Re = Q_(Re, 'dimensionless')
# calc C
C = (0.5961 + 0.0261 * beta**2 - 0.216 * beta**8 + 0.000521 *
(1e6 * beta / Re)**0.7 +
(0.0188 + 0.0063 *
(19000 * beta / Re)**0.8) * beta**3.5 * (1e6 / Re)**0.3 +
(0.043 + 0.080 * np.e**(-10 * L1) - 0.123 * np.e**
(-7 * L1)) * (1 - 0.11 * (19000 * beta / Re)**0.8) *
(beta**4 / (1 - beta**4)) - 0.031 *
(M2 - 0.8 * M2**1.1) * beta**1.3)
if D < Q_(71.12, 'mm'):
C += 0.011 * (0.75 - beta) * (2.8 - D / Q_(25.4, 'mm'))
qm = C / (np.sqrt(1 - beta**4)) * e * (
np.pi / 4) * d**2 * np.sqrt(2 * dP * rho)
Re_qm = (4 * qm /
(mu * np.pi * D)).to('dimensionless').magnitude
return abs(Re_qm - Re.magnitude)
def test_impeller2_new_suction(imp2):
new_suc = State.define(
p=Q_(0.2, "MPa"), T=301.58, fluid={"n2": 1 - 1e-15, "co2": 1e-15}
)
imp2_new = Impeller.convert_from(imp2, suc=new_suc, find="speed")
p0 = imp2[0]
new_p0 = imp2_new[0]
assert_allclose(new_p0.eff, p0.eff, rtol=1e-4)
assert_allclose(new_p0.phi, p0.phi, rtol=1e-2)
assert_allclose(new_p0.psi, p0.psi, rtol=1e-2)
assert_allclose(new_p0.head, 151889.637082, rtol=1e-2)
assert_allclose(new_p0.power, 483519.884306, rtol=1e-2)
assert_allclose(new_p0.speed, 1281.074036, rtol=1e-3)
assert_allclose(new_p0.mach_diff, -7.12032e-05, rtol=1e-3)
assert_allclose(new_p0.reynolds_ratio, 0.999879, rtol=1e-3)
assert_allclose(new_p0.volume_ratio_ratio, 0.999815, rtol=1e-5)
def __init__(self, points):
self.points = deepcopy(points)
curves = []
for speed, grouped_points in groupby(
sorted(self.points, key=lambda point: point.speed),
key=lambda point: point.speed,
):
points = [point for point in grouped_points]
curve = Curve(points)
curves.append(curve)
setattr(self, f"curve_{int(curve.speed.magnitude)}", curve)
self.curves = curves
self.disch = ImpellerState([c.disch for c in self.curves])
for attr in [
"disch.p",
"disch.T",
"disch.h",
"disch.s",
"disch.rho",
"head",
"eff",
"power",
"psi",
"phi",
]:
values = []
# for disch.p etc values are defined in _Impeller_State
if "." not in attr:
for c in self.curves:
param = r_getattr(c, attr)
values.append(param.magnitude)
units = param.units
r_setattr(self, attr, Q_(values, units))
r_setattr(self, attr + "_plot", impeller_plot_function(self, attr))
def test_curve_interpolation(curve0):
assert_allclose(curve0.disch.T_interpolated(1), 370.0)
# test for mutation of quantity magnitude
a = Q_(1.0, "m**3/h")
assert_allclose(curve0.disch.T_interpolated(a), 370.0)
assert isinstance(a.m, float)
FD_sheet = wb.sheets['DataSheet']
CF_sheet = wb.sheets['CalcFlow']
if FD_sheet['A1'].value != None:
FD_sheet['A1'].value = None
Open_file = False
if AT_sheet['H35'].value != None:
AT_sheet['H35'].value = None
AT_sheet['F36'].value = "Calculando..."
if FD_sheet['AN5'].value == 'Yes':
### Reading and writing in the FD sheet
Ps_FD = Q_(FD_sheet.range('T23').value, 'bar')
Ts_FD = Q_(FD_sheet.range('T24').value, 'degC')
Pd_FD = Q_(FD_sheet.range('T31').value, 'bar')
Td_FD = Q_(FD_sheet.range('T32').value, 'degC')
eff_FD = Q_(FD_sheet.range('T41').value, 'dimensionless')
Pow_FD = Q_(FD_sheet.range('T35').value, 'kW')
H_FD = Q_(FD_sheet.range('T40').value, 'J/kg')
if FD_sheet.range('T21').value == None:
V_test = True
flow_v_FD = Q_(FD_sheet.range('T29').value, 'm³/h')
else:
V_test = False
flow_m_FD = Q_(FD_sheet.range('T21').value, 'kg/h')
def __init__(
self,
d_cylinder, # Cylinder bore diameter (m)
Ps, # Suction pressure (bar a)
Ts, # Suction temperature (degC)
p_ratio, # Compressor pressure ratio Pd/Ps
rpm, # Compressor rotation speed (rpm)
double_effect, # Compressor is double effect (bool)
stroke, # Length of compressor full stroke (m)
L, # Connecting rod length
clearance, # Clearance volume as percentage of full volume (%)
k_gas=None, # Compressed gas isentropic exponent
MW=None, # Gas molecular weight
gas=None, # Gas name (not necessary if MX and k_gas informed)
rod_diam=0, # Rod diameter (m)
active_cyl='HE', # Active cylinder (only if double effect = False): 'HE' or 'CE'
tdc_angle=0, # Crank angle (degrees) at which piston is at top dead center
cap=100,
):
self.poly_sig = np.poly1d(
np.array([
4.07662578e-12, -1.76845633e-09, 3.22571698e-07,
-3.21443114e-05, 1.90316519e-03, -6.81078403e-02,
1.42782751e+00, -1.53184727e+01, 9.36732673e+01
]))
self.D = d_cylinder
self.Ps = Ps
self.Ts = Ts
self.pr = p_ratio
self.rpm = rpm
self.de = double_effect
self.r = stroke / 2
self.L = L
self.c = clearance / 100
self.rod = rod_diam
if cap == 100:
self.cap = 1
elif cap == 0:
self.cap = 0
elif cap > 0 and cap < 100:
self.cap = self.poly_sig(cap) / 100
else:
self.cap = 1
# self.cap=(19+0.62*cap)/100 # Sigmoidal
if double_effect:
self.active_cyl = None
else:
self.active_cyl = active_cyl
self.tdc = tdc_angle * np.pi / 180
if gas == None:
self.k = k_gas
self.mw = MW
self.vr = (self.pr)**(
-1 / self.k) # Volume ratio considering isentropic compression
else:
self.suc = ccp.State.define(fluid=gas,
T=Q_(Ts, 'degC'),
p=Q_(Ps, 'bar'))
self.k = self.suc.kv().m
self.mw = self.suc.molar_mass().m
self.disch = ccp.State.define(fluid=gas,
s=self.suc.s(),
p=self.suc.p() * p_ratio)
self.vr = (self.disch.v() / self.suc.v()).m
def load_from_dict(
cls,
suc,
head_curves=None,
eff_curves=None,
power_curves=None,
b=None,
D=None,
number_of_points=10,
flow_units="m**3/s",
head_units="J/kg",
eff_units="dimensionless",
pressure_ratio_units="dimensionless",
disch_T_units="degK",
power_units="W",
speed_units="RPM",
head_interpolation_method="interp1d",
eff_interpolation_method="interp1d",
power_interpolation_method="interp1d",
pressure_ratio_interpolation_method="interp1d",
disch_T_interpolation_method="interp1d",
):
"""Create points from dict object.
In this case the dict is in the following format:
curve = {
'10000': {
'x': [list with flow values],
'y': [list with head or eff values]
},
...}
Where 10000 is the speed for that curve.
suc : ccp.State
Suction state.
head_curves : dict
Dict with head/flow values.
eff_curves : dict
Dict with eff/flow values.
power_curves : dict
Dict with power/flow values.
b : float, pint.Quantity
Impeller width (m).
D : float, pint.Quantity
Impeller diameter (m).
number_of_points : int
Number of points that will be interpolated.
flow_units : str
Flow units used in the dict.
head_units : str
Head units used in the dict.
If the curve head units are in meter you can use: head_units="m*g0".
eff_units : str
Dimensionless.
speed_units : str
Speed units used in the dict.
head_interpolation_method : str, optional
Interpolation method from scipy. Can be interp1d or UnivariateSpline.
Default is interp1d.
eff_interpolation_method : str, optional
Interpolation method from scipy. Can be interp1d or UnivariateSpline.
Default is interp1d.
power_interpolation_method : str, optional
Interpolation method from scipy. Can be interp1d or UnivariateSpline.
Default is interp1d.
"""
# define if we have volume or mass flow
flow_type = "volumetric"
if list(Q_(1, flow_units).dimensionality.keys())[0] == "[mass]":
flow_type = "mass"
points = []
curves = {
k.split("_")[0]: v
for k, v in locals().items() if "curves" in k and v is not None
}
parameters = list(curves)
args = locals().copy()
interpolation_methods = [
args[f"{param}_interpolation_method"] for param in parameters
]
speeds = list(curves[parameters[0]])
if "eff" in curves:
if max(curves["eff"][speeds[0]]["y"]) > 1:
curves["eff"]["y"] = [i / 100 for i in curves["eff"]["y"]]
# create interpolated curves
curves_interpolated = {"interp1d": {}, "UnivariateSpline": {}}
# dict to hold interpolated values for specific x values
points_interpolated = {"interp1d": {}, "UnivariateSpline": {}}
for speed in speeds:
min_x = 0
max_x = 1e20
# get min and max flow
for curve in curves:
if curves[curve][speed]["x"][0] > min_x:
min_x = curves[curve][speed]["x"][0]
if curves[curve][speed]["x"][-1] < max_x:
max_x = curves[curve][speed]["x"][-1]
points_x = np.linspace(min_x, max_x, number_of_points)
for curve in curves:
curves_interpolated["interp1d"][curve] = {}
points_interpolated["interp1d"][curve] = {}
curves_interpolated["interp1d"][curve][speed] = interp1d(
curves[curve][speed]["x"],
curves[curve][speed]["y"],
kind=3,
fill_value="extrapolate",
)
points_interpolated["interp1d"][curve][
speed] = curves_interpolated["interp1d"][curve][speed](
points_x)
curves_interpolated["UnivariateSpline"][curve] = {}
points_interpolated["UnivariateSpline"][curve] = {}
curves_interpolated["UnivariateSpline"][curve][
speed] = UnivariateSpline(
curves[curve][speed]["x"],
curves[curve][speed]["y"],
)
points_interpolated["UnivariateSpline"][curve][
speed] = curves_interpolated["UnivariateSpline"][curve][
speed](points_x)
error = max(1 - (
points_interpolated["interp1d"][curve][speed] /
points_interpolated["UnivariateSpline"][curve][speed]))
if error > 0.1:
warnings.warn(
f"{curve.capitalize()} interpolation error in speed {speed} {speed_units}.\n"
)
args_list = []
for flow, param0, param1 in zip(
points_x,
points_interpolated[interpolation_methods[0]][
parameters[0]][speed],
points_interpolated[interpolation_methods[1]][
parameters[1]][speed],
):
arg_dict = {
"suc": suc,
"speed": Q_(float(speed), speed_units),
parameters[0]: Q_(param0, args[f"{parameters[0]}_units"]),
parameters[1]: Q_(param1, args[f"{parameters[1]}_units"]),
"b": b,
"D": D,
}
if flow_type == "volumetric":
arg_dict["flow_v"] = Q_(flow, flow_units)
elif flow_type == "mass":
arg_dict["flow_m"] = Q_(flow, flow_units)
args_list.append(arg_dict)
with multiprocessing.Pool() as pool:
points += pool.map(create_points_parallel, args_list)
return cls(points)
def test_interpolation_warning():
eff_curve = {
1000: {
"x": [
9.1937,
9.5582,
10.4576,
11.4588,
12.7945,
13.9998,
14.8382,
15.3756,
15.4093,
15.712,
15.9811,
16.2507,
16.5203,
16.7565,
16.8578,
17.0605,
17.2634,
],
"y": [
0.662945,
0.673879,
0.684813,
0.690723,
0.696042,
0.690427,
0.681562,
0.673288,
0.672401,
0.666491,
0.660876,
0.653784,
0.646396,
0.639303,
0.635757,
0.628665,
0.620982,
],
}
}
head_curve = {
1000: {
"x": [
9.1623,
9.9946,
9.9948,
10.7943,
11.5938,
12.3933,
12.4933,
13.293,
14.0929,
14.8597,
14.993,
15.7599,
16.4936,
17.2278,
],
"y": [
70.896,
70.513,
70.115,
68.537,
66.96,
65.383,
64.987,
63.011,
60.638,
57.867,
57.471,
54.302,
51.132,
46.768,
],
}
}
fluid = dict(
n2=1,
)
suc = State.define(p=Q_(62.7, "bar"), T=Q_(31.2, "degC"), fluid=fluid)
with pytest.warns(UserWarning) as record:
ccp.Impeller.load_from_dict(
suc=suc, head_curves=head_curve, eff_curves=eff_curve, b=1, D=1
)
assert "Head interpolation error in speed 1000 RPM" in record[0].message.args[0]
# faster to load than impeller_example
composition_fd = dict(
n2=0.4,
co2=0.22,
methane=92.11,
ethane=4.94,
propane=1.71,
ibutane=0.24,
butane=0.3,
ipentane=0.04,
pentane=0.03,
hexane=0.01,
)
suc_fd = State.define(p=Q_(3876, "kPa"), T=Q_(11, "degC"), fluid=composition_fd)
def test_load_from_dict_isis():
head_curves_dict = {
"CURVES": [
{
"z": 11373,
"points": [
{"x": 94529, "y": 148.586},
{"x": 98641, "y": 148.211},
{"x": 101554, "y": 147.837},
{"x": 105837, "y": 147.463},
{"x": 110120, "y": 145.967},
{"x": 114230, "y": 144.097},
{"x": 118167, "y": 141.479},
{"x": 130152, "y": 134.001},
{"x": 134089, "y": 131.384},
{"x": 138026, "y": 128.393},
{"x": 140080, "y": 126.523},
{"x": 144016, "y": 123.158},
{"x": 150177, "y": 117.176},
{"x": 153942, "y": 113.811},
{"x": 157705, "y": 109.698},
{"x": 160100, "y": 106.708},
{"x": 163693, "y": 102.595},
{"x": 167113, "y": 97.735},
{"x": 170190, "y": 92.875},
{"x": 173609, "y": 87.641},
{"x": 177200, "y": 82.407},
],
},
{
"z": 10463,
"points": [
{"x": 86421, "y": 126.284},
{"x": 90209, "y": 125.784},
{"x": 94492, "y": 125.036},
{"x": 98604, "y": 124.661},
{"x": 100146, "y": 124.287},
{"x": 104256, "y": 122.417},
{"x": 110077, "y": 118.678},
{"x": 114187, "y": 116.435},
{"x": 118125, "y": 114.191},
{"x": 122063, "y": 111.948},
{"x": 126172, "y": 109.33},
{"x": 130109, "y": 106.339},
{"x": 134045, "y": 102.974},
{"x": 137639, "y": 99.609},
{"x": 140206, "y": 97.366},
{"x": 143971, "y": 94.001},
{"x": 147907, "y": 89.888},
{"x": 150130, "y": 87.271},
{"x": 153722, "y": 82.411},
{"x": 156458, "y": 78.672},
{"x": 160049, "y": 73.812},
{"x": 163469, "y": 68.952},
],
},
{
"z": 9300,
"points": [
{"x": 76859, "y": 100.028},
{"x": 81085, "y": 99.245},
{"x": 85368, "y": 98.497},
{"x": 89309, "y": 98.122},
{"x": 90166, "y": 97.748},
{"x": 94276, "y": 96.252},
{"x": 98386, "y": 94.009},
{"x": 102152, "y": 91.765},
{"x": 106262, "y": 89.522},
{"x": 110200, "y": 87.278},
{"x": 114310, "y": 85.035},
{"x": 118075, "y": 82.043},
{"x": 122184, "y": 79.052},
{"x": 126121, "y": 76.061},
{"x": 130056, "y": 72.322},
{"x": 133821, "y": 68.584},
{"x": 137241, "y": 64.097},
{"x": 141860, "y": 58.863},
],
},
]
}
eff_curves_dict = {
"CURVES": [
{
"z": 11373,
"points": [
{"x": 94088, "y": 0.7515},
{"x": 97345, "y": 0.757113},
{"x": 104205, "y": 0.771707},
{"x": 107462, "y": 0.777695},
{"x": 110718, "y": 0.78256},
{"x": 114315, "y": 0.786678},
{"x": 117570, "y": 0.789673},
{"x": 121508, "y": 0.792669},
{"x": 134869, "y": 0.805772},
{"x": 138805, "y": 0.806898},
{"x": 142741, "y": 0.806527},
{"x": 145648, "y": 0.805033},
{"x": 149581, "y": 0.802044},
{"x": 150094, "y": 0.80167},
{"x": 153854, "y": 0.797933},
{"x": 157443, "y": 0.793073},
{"x": 160005, "y": 0.788213},
{"x": 162907, "y": 0.781856},
{"x": 165295, "y": 0.774377},
{"x": 167001, "y": 0.768768},
{"x": 169046, "y": 0.76054},
{"x": 172792, "y": 0.742214},
{"x": 174494, "y": 0.733613},
{"x": 177637, "y": 0.717055},
],
},
{
"z": 10463,
"points": [
{"x": 86559, "y": 0.751493},
{"x": 89817, "y": 0.757855},
{"x": 92732, "y": 0.764216},
{"x": 95820, "y": 0.7717},
{"x": 98735, "y": 0.777688},
{"x": 100449, "y": 0.780681},
{"x": 104047, "y": 0.785547},
{"x": 107815, "y": 0.788917},
{"x": 113125, "y": 0.793784},
{"x": 116894, "y": 0.797902},
{"x": 122375, "y": 0.803517},
{"x": 126484, "y": 0.805765},
{"x": 130591, "y": 0.806143},
{"x": 135295, "y": 0.804089},
{"x": 137945, "y": 0.801847},
{"x": 139654, "y": 0.800165},
{"x": 143243, "y": 0.79568},
{"x": 147000, "y": 0.788576},
{"x": 149903, "y": 0.781845},
{"x": 152120, "y": 0.774366},
{"x": 154761, "y": 0.763521},
{"x": 157570, "y": 0.749683},
{"x": 159016, "y": 0.740894},
{"x": 163440, "y": 0.716584},
],
},
{
"z": 9300,
"points": [
{"x": 76977, "y": 0.751485},
{"x": 79892, "y": 0.757847},
{"x": 80235, "y": 0.758595},
{"x": 82809, "y": 0.765704},
{"x": 85211, "y": 0.771691},
{"x": 87955, "y": 0.778427},
{"x": 90184, "y": 0.782169},
{"x": 93782, "y": 0.786661},
{"x": 97550, "y": 0.790404},
{"x": 101319, "y": 0.794522},
{"x": 104746, "y": 0.799388},
{"x": 110228, "y": 0.805751},
{"x": 114336, "y": 0.806877},
{"x": 118441, "y": 0.805384},
{"x": 124083, "y": 0.800339},
{"x": 127500, "y": 0.795105},
{"x": 132110, "y": 0.78501},
{"x": 136884, "y": 0.767994},
{"x": 138586, "y": 0.759392},
{"x": 140456, "y": 0.747424},
{"x": 141816, "y": 0.738448},
{"x": 145226, "y": 0.716758},
],
},
]
}
composition_fd = dict(
n2=0.4,
co2=0.22,
methane=92.11,
ethane=4.94,
propane=1.71,
ibutane=0.24,
butane=0.3,
ipentane=0.04,
pentane=0.03,
hexane=0.01,
)
suc_fd = State.define(p=Q_(3876, "kPa"), T=Q_(11, "degC"), fluid=composition_fd)
imp = ccp.Impeller.load_from_dict_isis(
suc=suc_fd,
head_curves=head_curves_dict,
eff_curves=eff_curves_dict,
b=Q_(10.6, "mm"),
D=Q_(390, "mm"),
number_of_points=6,
flow_units="kg/h",
head_units="kJ/kg",
)
p0 = imp.point(flow_m=Q_(90184, "kg/h"), speed=Q_(9300, "RPM"))
assert_allclose(p0.eff, 0.782169, rtol=1e-4)
assert_allclose(p0.head, 97729.49349, rtol=1e-4)
assert_allclose(p0.power, 3130330.074989, rtol=1e-4)
def imp1():
fluid = dict(
methane=0.69945,
ethane=0.09729,
propane=0.0557,
nbutane=0.0178,
ibutane=0.0102,
npentane=0.0039,
ipentane=0.0036,
nhexane=0.0018,
n2=0.0149,
co2=0.09259,
h2s=0.00017,
water=0.002,
)
suc = State.define(p=Q_(1.6995, "MPa"), T=311.55, fluid=fluid)
p0 = Point(
suc=suc,
flow_v=Q_(6501.67, "m**3/h"),
speed=Q_(11145, "RPM"),
head=Q_(179.275, "kJ/kg"),
eff=0.826357,
b=Q_(28.5, "mm"),
D=Q_(365, "mm"),
)
p1 = Point(
suc=suc,
flow_v=Q_(7016.72, "m**3/h"),
speed=Q_(11145, "RPM"),
head=Q_(173.057, "kJ/kg"),
eff=0.834625,
b=Q_(28.5, "mm"),
D=Q_(365, "mm"),
)
imp1 = Impeller([p0, p1])
return imp1
def imp2():
points = [
Point(
suc=State.define(p=Q_("100663 Pa"), T=Q_("305 K"), fluid={"AIR": 1.00000}),
speed=Q_("1263 rad/s"),
flow_v=Q_("1.15 m³/s"),
head=Q_("147634 J/kg"),
eff=Q_("0.819"),
b=0.010745,
D=0.32560,
),
Point(
suc=State.define(p=Q_("100663 Pa"), T=Q_("305 K"), fluid={"AIR": 1.00000}),
speed=Q_("1263 rad/s"),
flow_v=Q_("1.26 m³/s"),
head=Q_("144664 J/kg"),
eff=Q_("0.829"),
b=0.010745,
D=0.32560,
),
Point(
suc=State.define(p=Q_("100663 Pa"), T=Q_("305 K"), fluid={"AIR": 1.00000}),
speed=Q_("1263 rad/s"),
flow_v=Q_("1.36 m³/s"),
head=Q_("139945 J/kg"),
eff=Q_("0.831"),
b=0.010745,
D=0.32560,
),
Point(
suc=State.define(p=Q_("100663 Pa"), T=Q_("305 K"), fluid={"AIR": 1.00000}),
speed=Q_("1337 rad/s"),
flow_v=Q_("1.22 m³/s"),
head=Q_("166686 J/kg"),
eff=Q_("0.814"),
b=0.010745,
D=0.32560,
),
Point(
suc=State.define(p=Q_("100663 Pa"), T=Q_("305 K"), fluid={"AIR": 1.00000}),
speed=Q_("1337 rad/s"),
flow_v=Q_("1.35 m³/s"),
head=Q_("163620 J/kg"),
eff=Q_("0.825"),
b=0.010745,
D=0.32560,
),
Point(
suc=State.define(p=Q_("100663 Pa"), T=Q_("305 K"), fluid={"AIR": 1.00000}),
speed=Q_("1337 rad/s"),
flow_v=Q_("1.48 m³/s"),
head=Q_("158536 J/kg"),
eff=Q_("0.830"),
b=0.010745,
D=0.32560,
),
]
imp2 = Impeller(points)
return imp2
def test_conversion(imp3):
new_suc = ccp.State.define(p=Q_(2000, "kPa"), T=300, fluid={"co2": 1})
new_imp3 = ccp.Impeller.convert_from(imp3, suc=new_suc)
# fmt: off
expected_data = (
{
'name': '610.0 radian / second',
'x': np.array([0.41912405, 0.43130594, 0.44348782, 0.45566971, 0.46785159, 0.48003348,
0.49221536, 0.50439725, 0.51657914, 0.52876102, 0.54094291, 0.55312479,
0.56530668, 0.57748857, 0.58967045, 0.60185234, 0.61403422, 0.62621611,
0.63839799, 0.65057988, 0.66276177, 0.67494365, 0.68712554, 0.69930742,
0.71148931, 0.7236712 , 0.73585308, 0.74803497, 0.76021685, 0.77239874]),
'y': np.array([39289.31488196, 39344.84790727, 39303.6880876 , 39175.43439992,
38969.68582119, 38696.04132836, 38364.09989839, 37983.46050824,
37563.72213487, 37114.48375523, 36645.34434629, 36165.90288501,
35685.57453847, 35206.62886529, 34722.05302594, 34224.21382259,
33705.4780574 , 33158.21253254, 32574.9964841 , 31951.58778887,
31286.19124756, 30577.07460428, 29822.50560311, 29020.75198815,
28170.08150349, 27268.76189323, 26315.06090146, 25307.24627228,
24243.58574978, 23122.34707806])
},
{
'name': '684.0 radian / second',
'x': np.array([0.46966959, 0.48405431, 0.49843902, 0.51282374, 0.52720845, 0.54159317,
0.55597788, 0.57036259, 0.58474731, 0.59913202, 0.61351674, 0.62790145,
0.64228617, 0.65667088, 0.67105559, 0.68544031, 0.69982502, 0.71420974,
0.72859445, 0.74297917, 0.75736388, 0.77174859, 0.78613331, 0.80051802,
0.81490274, 0.82928745, 0.84367217, 0.85805688, 0.87244159, 0.88682631]),
'y': np.array([49262.68664941, 49372.55805869, 49344.95140393, 49193.30856685,
48931.07142915, 48571.68187254, 48128.58177873, 47615.21302943,
47045.01750635, 46431.4370912 , 45787.91366568, 45127.88911151,
44464.55578681, 43801.4058204 , 43129.33040014, 42438.37857178,
41718.5993811 , 40960.04187384, 40152.99105682, 39291.26261319,
38371.39014774, 37389.97717965, 36343.62722808, 35228.94381223,
34042.53045126, 32780.99066436, 31440.92797069, 30018.94588944,
28511.64793979, 26915.6376409 ])
},
{
'name': '742.0 radian / second',
'x': np.array([0.5113496 , 0.52677044, 0.54219128, 0.55761212, 0.57303296, 0.5884538 ,
0.60387464, 0.61929548, 0.63471632, 0.65013716, 0.66555801, 0.68097885,
0.69639969, 0.71182053, 0.72724137, 0.74266221, 0.75808305, 0.77350389,
0.78892473, 0.80434557, 0.81976641, 0.83518725, 0.85060809, 0.86602893,
0.88144977, 0.89687061, 0.91229146, 0.9277123 , 0.94313314, 0.95855398]),
'y': np.array([57611.59859346, 57707.57083545, 57664.41602198, 57494.33376897,
57209.52369233, 56822.18540799, 56344.51853186, 55788.72267986,
55166.99746792, 54491.54251194, 53774.55742785, 53028.24183156,
52264.58074003, 51487.21663537, 50688.95475185, 49861.87605224,
48998.06149931, 48089.59205582, 47128.70498871, 46109.97633847,
45029.78253812, 43884.54633303, 42670.69046855, 41384.63769004,
40022.81074287, 38581.63237241, 37057.525324 , 35446.91234302,
33746.21617482, 31951.85956477])
}
)
# fmt: on
fig = new_imp3.head_plot()
for exp_data, act_data in zip(expected_data, fig.data):
assert exp_data["name"] == act_data["name"]
assert_allclose(exp_data["x"], act_data["x"])
assert_allclose(exp_data["y"], act_data["y"])