def _get_settings(self):
_ani = self._memobj.ani
_settings = self._memobj.settings
_vfoa = self._memobj.vfoa
_vfob = self._memobj.vfob
_keymaps = self._memobj.keymaps
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
keymaps = RadioSettingGroup("keymaps", "KeyMaps")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group = RadioSettings(basic, advanced, workmode, keymaps, dtmf)
rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 5, _settings.squelch))
basic.append(rs)
rs = RadioSetting("battery_saver", "Battery Save",
RadioSettingValueBoolean(_settings.battery_saver))
advanced.append(rs)
rs = RadioSetting(
"vox", "VOX Sensitivity",
RadioSettingValueList(VOX_LIST, VOX_LIST[_settings.vox]))
basic.append(rs)
rs = RadioSetting(
"auto_bl", "Auto Backlight Timeout",
RadioSettingValueList(AUTOBL_LIST, AUTOBL_LIST[_settings.auto_bl]))
advanced.append(rs)
rs = RadioSetting(
"tot", "TX Timeout Timer",
RadioSettingValueList(TOT_LIST, TOT_LIST[_settings.tot]))
basic.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("voice", "Voice",
RadioSettingValueBoolean(_settings.voice))
advanced.append(rs)
rs = RadioSetting(
"language", "Language",
RadioSettingValueList(LANGUAGE_LIST,
LANGUAGE_LIST[_settings.language]))
advanced.append(rs)
rs = RadioSetting(
"mdfa", "Display Mode (A)",
RadioSettingValueList(MODE_LIST, MODE_LIST[_settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"mdfb", "Display Mode (B)",
RadioSettingValueList(MODE_LIST, MODE_LIST[_settings.mdfb]))
basic.append(rs)
rs = RadioSetting(
"scan_mode", "Scan Mode",
RadioSettingValueList(SCAN_MODE_LIST,
SCAN_MODE_LIST[_settings.scan_mode]))
basic.append(rs)
rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)
rs = RadioSetting(
"almod", "Alarm Mode",
RadioSettingValueList(ALMOD_LIST, ALMOD_LIST[_settings.almod]))
advanced.append(rs)
rs = RadioSetting("alsnd", "Alarm Sound",
RadioSettingValueBoolean(_settings.alsnd))
advanced.append(rs)
rs = RadioSetting("ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_settings.ste))
advanced.append(rs)
rs = RadioSetting(
"rpste", "Squelch Tail Eliminate (repeater)",
RadioSettingValueList(RPSTE_LIST, RPSTE_LIST[_settings.rpste]))
advanced.append(rs)
rs = RadioSetting(
"rptrl", "STE Repeater Delay",
RadioSettingValueList(STEDELAY_LIST,
STEDELAY_LIST[_settings.rptrl]))
advanced.append(rs)
rs = RadioSetting("fmradio", "Disable Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
advanced.append(rs)
rs = RadioSetting(
"voxdelay", "VOX Delay",
RadioSettingValueList(VOX_DELAY_LIST,
VOX_DELAY_LIST[_settings.voxdelay]))
advanced.append(rs)
rs = RadioSetting(
"menu_timeout", "Menu Timeout",
RadioSettingValueList(MENU_TIMEOUT_LIST,
MENU_TIMEOUT_LIST[_settings.menu_timeout]))
advanced.append(rs)
rs = RadioSetting(
"micgain", "Mic Gain",
RadioSettingValueList(MICGAIN_LIST,
MICGAIN_LIST[_settings.micgain]))
advanced.append(rs)
for entry in KEY_FUNCTIONS:
if entry[1] == _keymaps.sidekey:
rs = RadioSetting(
"keymaps.sidekey", "Side Key Short Press",
RadioSettingValueMap(KEY_FUNCTIONS, _keymaps.sidekey))
keymaps.append(rs)
for entry in KEY_FUNCTIONS:
if entry[1] == _keymaps.sidekeyl:
rs = RadioSetting(
"keymaps.sidekeyl", "Side Key Long Press",
RadioSettingValueMap(KEY_FUNCTIONS, _keymaps.sidekeyl))
keymaps.append(rs)
rs = RadioSetting(
"workmodea", "Work Mode (A)",
RadioSettingValueList(WORKMODE_LIST,
WORKMODE_LIST[_settings.workmodea]))
workmode.append(rs)
rs = RadioSetting(
"workmodeb", "Work Mode (B)",
RadioSettingValueList(WORKMODE_LIST,
WORKMODE_LIST[_settings.workmodeb]))
workmode.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
msg = ("Can't be between 174.00000-400.00000")
raise InvalidValueError(msg)
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _vfob)
workmode.append(rs)
rs = RadioSetting(
"vfoa.sftd", "VFO A Shift",
RadioSettingValueList(SHIFTD_LIST, SHIFTD_LIST[_vfoa.sftd]))
workmode.append(rs)
rs = RadioSetting(
"vfob.sftd", "VFO B Shift",
RadioSettingValueList(SHIFTD_LIST, SHIFTD_LIST[_vfob.sftd]))
workmode.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 100)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 100
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_offset(_vfoa.offset))
rs = RadioSetting("vfoa.offset", "VFO A Offset (0.0-999.999)", val1a)
rs.set_apply_callback(apply_offset, _vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_offset(_vfob.offset))
rs = RadioSetting("vfob.offset", "VFO B Offset (0.0-999.999)", val1b)
rs.set_apply_callback(apply_offset, _vfob)
workmode.append(rs)
rs = RadioSetting(
"vfoa.txpower", "VFO A Power",
RadioSettingValueList(TXPOWER_LIST, TXPOWER_LIST[_vfoa.txpower]))
workmode.append(rs)
rs = RadioSetting(
"vfob.txpower", "VFO B Power",
RadioSettingValueList(TXPOWER_LIST, TXPOWER_LIST[_vfob.txpower]))
workmode.append(rs)
rs = RadioSetting(
"vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(BANDWIDTH_LIST,
BANDWIDTH_LIST[_vfoa.widenarr]))
workmode.append(rs)
rs = RadioSetting(
"vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(BANDWIDTH_LIST,
BANDWIDTH_LIST[_vfob.widenarr]))
workmode.append(rs)
rs = RadioSetting(
"vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(PTTIDCODE_LIST, PTTIDCODE_LIST[_vfoa.scode]))
workmode.append(rs)
rs = RadioSetting(
"vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(PTTIDCODE_LIST, PTTIDCODE_LIST[_vfob.scode]))
workmode.append(rs)
rs = RadioSetting(
"vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(STEP_LIST, STEP_LIST[_vfoa.step]))
workmode.append(rs)
rs = RadioSetting(
"vfob.step", "VFO B Tuning Step",
RadioSettingValueList(STEP_LIST, STEP_LIST[_vfob.step]))
workmode.append(rs)
dtmfchars = "0123456789 *#ABCD"
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i, "PTT ID Code %i" % (i + 1),
val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)
rs = RadioSetting(
"ani.aniid", "ANI ID",
RadioSettingValueList(PTTID_LIST, PTTID_LIST[_ani.aniid]))
dtmf.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, _ani)
dtmf.append(rs)
rs = RadioSetting(
"dtmfst", "DTMF Sidetone",
RadioSettingValueList(DTMFST_LIST, DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)
if _ani.dtmfon > 0xC3:
val = 0x00
else:
val = _ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(DTMFSPEED_LIST, DTMFSPEED_LIST[val]))
dtmf.append(rs)
if _ani.dtmfoff > 0xC3:
val = 0x00
else:
val = _ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(DTMFSPEED_LIST, DTMFSPEED_LIST[val]))
dtmf.append(rs)
rs = RadioSetting(
"pttlt", "PTT ID Delay",
RadioSettingValueList(PTTLT_LIST, PTTLT_LIST[_settings.pttlt]))
dtmf.append(rs)
return group
def _get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
group = RadioSettingGroup("top", "All Settings", basic, advanced)
rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)
rs = RadioSetting("save", "Battery Saver",
RadioSettingValueInteger(0, 4, _settings.save))
basic.append(rs)
rs = RadioSetting("abr", "Backlight",
RadioSettingValueBoolean(_settings.abr))
basic.append(rs)
rs = RadioSetting("tdr", "Dual Watch (BDR)",
RadioSettingValueBoolean(_settings.tdr))
advanced.append(rs)
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
RadioSettingValueList(uv5r.TDRAB_LIST,
uv5r.TDRAB_LIST[_settings.tdrab]))
advanced.append(rs)
rs = RadioSetting("alarm", "Alarm",
RadioSettingValueBoolean(_settings.alarm))
advanced.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(uv5r.TIMEOUT_LIST,
uv5r.TIMEOUT_LIST[_settings.timeout]))
basic.append(rs)
rs = RadioSetting("screv", "Scan Resume",
RadioSettingValueList(uv5r.RESUME_LIST,
uv5r.RESUME_LIST[_settings.screv]))
advanced.append(rs)
rs = RadioSetting("mdfa", "Display Mode (A)",
RadioSettingValueList(uv5r.MODE_LIST,
uv5r.MODE_LIST[_settings.mdfa]))
basic.append(rs)
rs = RadioSetting("mdfb", "Display Mode (B)",
RadioSettingValueList(uv5r.MODE_LIST,
uv5r.MODE_LIST[_settings.mdfb]))
basic.append(rs)
rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)
rs = RadioSetting("fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)
rs = RadioSetting("wtled", "Standby LED Color",
RadioSettingValueList(COLOR_LIST,
COLOR_LIST[_settings.wtled]))
basic.append(rs)
rs = RadioSetting("rxled", "RX LED Color",
RadioSettingValueList(COLOR_LIST,
COLOR_LIST[_settings.rxled]))
basic.append(rs)
rs = RadioSetting("txled", "TX LED Color",
RadioSettingValueList(COLOR_LIST,
COLOR_LIST[_settings.txled]))
basic.append(rs)
rs = RadioSetting("reset", "RESET Menu",
RadioSettingValueBoolean(_settings.reset))
advanced.append(rs)
rs = RadioSetting("menu", "All Menus",
RadioSettingValueBoolean(_settings.menu))
advanced.append(rs)
if len(self._mmap.get_packed()) == 0x1808:
# Old image, without aux block
return group
other = RadioSettingGroup("other", "Other Settings")
group.append(other)
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = self._memobj.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
limit = "limits"
vhf_limit = getattr(self._memobj, limit).vhf
rs = RadioSetting("%s.vhf.lower" % limit, "VHF Lower Limit (MHz)",
RadioSettingValueInteger(1, 1000,
vhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.vhf.upper" % limit, "VHF Upper Limit (MHz)",
RadioSettingValueInteger(1, 1000,
vhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.vhf.enable" % limit, "VHF TX Enabled",
RadioSettingValueBoolean(vhf_limit.enable))
other.append(rs)
uhf_limit = getattr(self._memobj, limit).uhf
rs = RadioSetting("%s.uhf.lower" % limit, "UHF Lower Limit (MHz)",
RadioSettingValueInteger(1, 1000,
uhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.uhf.upper" % limit, "UHF Upper Limit (MHz)",
RadioSettingValueInteger(1, 1000,
uhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.uhf.enable" % limit, "UHF TX Enabled",
RadioSettingValueBoolean(uhf_limit.enable))
other.append(rs)
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
group.append(workmode)
options = ["A", "B"]
rs = RadioSetting("displayab", "Display Selected",
RadioSettingValueList(options,
options[_settings.displayab]))
workmode.append(rs)
options = ["Frequency", "Channel"]
rs = RadioSetting("workmode", "VFO/MR Mode",
RadioSettingValueList(options,
options[_settings.workmode]))
workmode.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
workmode.append(rs)
_mrcna = self._memobj.wmchannel.mrcha
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mrcna))
workmode.append(rs)
_mrcnb = self._memobj.wmchannel.mrchb
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mrcnb))
workmode.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
raise InvalidValueError("Can't be between 174.00000-400.00000")
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(self._memobj.vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(self._memobj.vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, self._memobj.vfob)
workmode.append(rs)
options = ["Off", "+", "-"]
rs = RadioSetting("vfoa.sftd", "VFO A Shift",
RadioSettingValueList(options,
options[self._memobj.vfoa.sftd]))
workmode.append(rs)
rs = RadioSetting("vfob.sftd", "VFO B Shift",
RadioSettingValueList(options,
options[self._memobj.vfob.sftd]))
workmode.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 10000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10000
for i in range(3, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_offset(self._memobj.vfoa.offset))
rs = RadioSetting("vfoa.offset", "VFO A Offset (0.00-69.95)", val1a)
rs.set_apply_callback(apply_offset, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_offset(self._memobj.vfob.offset))
rs = RadioSetting("vfob.offset", "VFO B Offset (0.00-69.95)", val1b)
rs.set_apply_callback(apply_offset, self._memobj.vfob)
workmode.append(rs)
options = ["High", "Low"]
rs = RadioSetting("vfoa.txpower", "VFO A Power",
RadioSettingValueList(options,
options[self._memobj.vfoa.txpower]))
workmode.append(rs)
rs = RadioSetting("vfob.txpower", "VFO B Power",
RadioSettingValueList(options,
options[self._memobj.vfob.txpower]))
workmode.append(rs)
options = ["Wide", "Narrow"]
rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(options,
options[self._memobj.vfoa.widenarr]))
workmode.append(rs)
rs = RadioSetting("vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(options,
options[self._memobj.vfob.widenarr]))
workmode.append(rs)
options = ["%s" % x for x in range(1, 16)]
rs = RadioSetting("vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(options,
options[self._memobj.vfoa.scode]))
workmode.append(rs)
rs = RadioSetting("vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(options,
options[self._memobj.vfob.scode]))
workmode.append(rs)
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(uv5r.STEP291_LIST,
uv5r.STEP291_LIST[self._memobj.vfoa.step]))
workmode.append(rs)
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
RadioSettingValueList(uv5r.STEP291_LIST,
uv5r.STEP291_LIST[self._memobj.vfob.step]))
workmode.append(rs)
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Preset")
group.append(fm_preset)
preset = self._memobj.fm_preset / 10.0 + 87
rs = RadioSetting("fm_preset", "FM Preset(MHz)",
RadioSettingValueFloat(87, 107.5, preset, 0.1, 1))
fm_preset.append(rs)
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group.append(dtmf)
dtmfchars = "0123456789 *#ABCD"
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i, "PTT ID Code %i" % (i + 1), val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
options = ["Off", "BOT", "EOT", "Both"]
rs = RadioSetting("ani.aniid", "ANI ID",
RadioSettingValueList(options,
options[self._memobj.ani.aniid]))
dtmf.append(rs)
_codeobj = self._memobj.ani.alarmcode
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.alarmcode", "Alarm Code", val)
def apply_code(setting, obj):
alarmcode = []
for j in range(5):
try:
alarmcode.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
alarmcode.append(0xFF)
obj.alarmcode = alarmcode
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
rs = RadioSetting("dtmfst", "DTMF Sidetone",
RadioSettingValueList(uv5r.DTMFST_LIST,
uv5r.DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfon]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfoff]))
dtmf.append(rs)
return group
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting("settings.squelch", "Squelch",
RadioSettingValueList(
LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(
LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting("settings.vox", "Vox",
RadioSettingValueList(
LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting("settings.abr", "Backlight Timeout",
RadioSettingValueList(
LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting("settings.timeout", "Timeout Timer",
RadioSettingValueList(
LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(
LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting("settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[
_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(
LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting("settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[
_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting("settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[
_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting("settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[
_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_mem.settings.autolk))
basic.append(rs)
rs = RadioSetting("settings.wtled", "Standby LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting("settings.rxled", "RX LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting("settings.txled", "TX LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(
LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
if _mem.settings.tdrab > 0x02:
val = 0x00
else:
val = _mem.settings.tdrab
rs = RadioSetting("settings.tdrab", "Dual Watch TX Priority",
RadioSettingValueList(
LIST_OFFAB, LIST_OFFAB[val]))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
if _mem.settings.rpste > 0x0A:
val = 0x00
else:
val = _mem.settings.rpste
rs = RadioSetting("settings.rpste",
"Squelch Tail Eliminate (repeater)",
RadioSettingValueList(
LIST_RPSTE, LIST_RPSTE[val]))
basic.append(rs)
if _mem.settings.rptrl > 0x0A:
val = 0x00
else:
val = _mem.settings.rptrl
rs = RadioSetting("settings.rptrl", "STE Repeater Delay",
RadioSettingValueList(
LIST_STEDELAY, LIST_STEDELAY[val]))
basic.append(rs)
rs = RadioSetting("settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[
_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(
0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(
0, 7, _filter(_msg.line2)))
other.append(rs)
lower = 130
upper = 179
rs = RadioSetting("limits.vhf.lower", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.vhf.lower))
other.append(rs)
rs = RadioSetting("limits.vhf.upper", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.vhf.upper))
other.append(rs)
lower = 400
upper = 520
rs = RadioSetting("limits.uhf.lower", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.uhf.lower))
other.append(rs)
rs = RadioSetting("limits.uhf.upper", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.uhf.upper))
other.append(rs)
# Work mode settings
rs = RadioSetting("settings.displayab", "Display",
RadioSettingValueList(
LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting("settings.workmode", "VFO/MR Mode",
RadioSettingValueList(
LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.workmode]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127,
_mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127,
_mem.wmchannel.mrchb))
work.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
msg = ("Can't be less than %i.0000")
if value > 99000000 and value < 130 * 1000000:
raise InvalidValueError(msg % (130))
msg = ("Can't be between %i.9975-%i.0000")
if (179 + 1) * 1000000 <= value and value < 400 * 1000000:
raise InvalidValueError(msg % (179, 400))
msg = ("Can't be greater than %i.9975")
if value > 99000000 and value > (520 + 1) * 1000000:
raise InvalidValueError(msg % (520))
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)
rs = RadioSetting("vfo.a.sftd", "VFO A Shift",
RadioSettingValueList(
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)
rs = RadioSetting("vfo.b.sftd", "VFO B Shift",
RadioSettingValueList(
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset",
"VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset",
"VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)
rs = RadioSetting("vfo.a.txpower3", "VFO A Power",
RadioSettingValueList(
LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.a.txpower3]))
work.append(rs)
rs = RadioSetting("vfo.b.txpower3", "VFO B Power",
RadioSettingValueList(
LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.b.txpower3]))
work.append(rs)
rs = RadioSetting("vfo.a.widenarr", "VFO A Bandwidth",
RadioSettingValueList(
LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.widenarr]))
work.append(rs)
rs = RadioSetting("vfo.b.widenarr", "VFO B Bandwidth",
RadioSettingValueList(
LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.widenarr]))
work.append(rs)
rs = RadioSetting("vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(
LIST_SCODE,
LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)
rs = RadioSetting("vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(
LIST_SCODE,
LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)
rs = RadioSetting("vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(
LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)
rs = RadioSetting("vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(
LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF settings
def apply_code(setting, obj, length):
code = []
for j in range(0, length):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
pttid = RadioSetting("pttid/%i.code" % i,
"Signal Code %i" % (i + 1), val)
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
dtmfe.append(pttid)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED,
LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED,
LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
dtmfe.append(rs)
rs = RadioSetting("ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID,
LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# Service settings
for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "squelch.%s.sql%i" % (band, index)
if band == "vhf":
_obj = self._memobj.squelch.vhf
elif band == "uhf":
_obj = self._memobj.squelch.uhf
val = RadioSettingValueInteger(0, 123,
getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting(
"settings.squelch", "Squelch",
RadioSettingValueList(LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting(
"settings.vox", "Vox",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting(
"settings.abr", "Backlight Timeout",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting(
"settings.timeout", "Timeout Timer",
RadioSettingValueList(LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting(
"settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST,
LIST_DTMFST[_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting(
"settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting(
"settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.autolk", "Auto Lock Keypad",
RadioSettingValueBoolean(_mem.settings.autolk))
basic.append(rs)
rs = RadioSetting(
"settings.wtled", "Standby LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting(
"settings.rxled", "RX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting(
"settings.txled", "TX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
if _mem.settings.almod > 0x02:
val = 0x00
else:
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
if _mem.settings.tcall > 0x05:
val = 0x00
else:
val = _mem.settings.tcall
rs = RadioSetting("settings.tcall", "Tone Burst Frequency",
RadioSettingValueList(LIST_TCALL, LIST_TCALL[val]))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
if _mem.settings.rpste > 0x0A:
val = 0x00
else:
val = _mem.settings.rpste
rs = RadioSetting("settings.rpste",
"Squelch Tail Eliminate (repeater)",
RadioSettingValueList(LIST_RPSTE, LIST_RPSTE[val]))
basic.append(rs)
if _mem.settings.rptrl > 0x0A:
val = 0x00
else:
val = _mem.settings.rptrl
rs = RadioSetting(
"settings.rptrl", "STE Repeater Delay",
RadioSettingValueList(LIST_STEDELAY, LIST_STEDELAY[val]))
basic.append(rs)
rs = RadioSetting(
"settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG,
LIST_PONMSG[_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 8, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 8, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 8, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 8, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
lower = 136
upper = 174
rs = RadioSetting(
"limits.vhf.lower", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.vhf.upper", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.upper))
other.append(rs)
lower = 400
upper = 520
rs = RadioSetting(
"limits.uhf.lower", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.uhf.upper", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.upper))
other.append(rs)
# Work mode settings
rs = RadioSetting(
"settings.displayab", "Display",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting(
"settings.workmode", "VFO/MR Mode",
RadioSettingValueList(LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.workmode]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrchb))
work.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
_vhf_lower = int(_mem.limits.vhf.lower)
_vhf_upper = int(_mem.limits.vhf.upper)
_uhf_lower = int(_mem.limits.uhf.lower)
_uhf_upper = int(_mem.limits.uhf.upper)
value = chirp_common.parse_freq(value)
msg = ("Can't be less than %i.0000")
if value > 99000000 and value < _vhf_lower * 1000000:
raise InvalidValueError(msg % _vhf_lower)
msg = ("Can't be between %i.9975-%i.0000")
if _vhf_upper * 1000000 <= value and value < _uhf_lower * 1000000:
raise InvalidValueError(msg % (_vhf_upper - 1, _uhf_lower))
msg = ("Can't be greater than %i.9975")
if value > 99000000 and value >= _uhf_upper * 1000000:
raise InvalidValueError(msg % (_uhf_upper - 1))
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.sftd", "VFO A Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)
rs = RadioSetting(
"vfo.b.sftd", "VFO B Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset", "VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset", "VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.txpower", "VFO A Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.a.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.b.txpower", "VFO B Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.b.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.a.widenarr", "VFO A Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.b.widenarr", "VFO B Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)
rs = RadioSetting(
"vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF settings
def apply_code(setting, obj, length):
code = []
for j in range(0, length):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
pttid = RadioSetting("pttid/%i.code" % i,
"Signal Code %i" % (i + 1), val)
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
dtmfe.append(pttid)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
dtmfe.append(rs)
rs = RadioSetting(
"ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# Service settings
for index in range(0, 10):
key = "squelch.sql%i" % (index)
_obj = self._memobj.squelch
val = RadioSettingValueInteger(0, 123,
getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "Squelch %i" % (index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
dtmfd = RadioSettingGroup("dtmfd", "DTMF Decode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
dtmfd, service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting(
"settings.squelch", "Squelch",
RadioSettingValueList(LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting(
"settings.vox", "Vox",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting(
"settings.abr", "Backlight Timeout",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting(
"settings.timeout", "Timeout Timer",
RadioSettingValueList(LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting(
"settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST,
LIST_DTMFST[_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting(
"settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting(
"settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.sync", "Sync A & B",
RadioSettingValueBoolean(_mem.settings.sync))
basic.append(rs)
rs = RadioSetting(
"settings.wtled", "Standby LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting(
"settings.rxled", "RX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting(
"settings.txled", "TX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
if _mem.settings.almod > 0x02:
val = 0x00
else:
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
if _mem.settings.tdrab > 0x02:
val = 0x00
else:
val = _mem.settings.tdrab
rs = RadioSetting("settings.tdrab", "Dual Watch TX Priority",
RadioSettingValueList(LIST_OFFAB, LIST_OFFAB[val]))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
if _mem.settings.rpste > 0x0A:
val = 0x00
else:
val = _mem.settings.rpste
rs = RadioSetting("settings.rpste",
"Squelch Tail Eliminate (repeater)",
RadioSettingValueList(LIST_RPSTE, LIST_RPSTE[val]))
basic.append(rs)
if _mem.settings.rptrl > 0x0A:
val = 0x00
else:
val = _mem.settings.rptrl
rs = RadioSetting(
"settings.rptrl", "STE Repeater Delay",
RadioSettingValueList(LIST_STEDELAY, LIST_STEDELAY[val]))
basic.append(rs)
rs = RadioSetting(
"settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG,
LIST_PONMSG[_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
rs = RadioSetting("settings.dani", "Decode ANI",
RadioSettingValueBoolean(_mem.settings.dani))
basic.append(rs)
if _mem.settings.dtmfg > 0x3C:
val = 0x14
else:
val = _mem.settings.dtmfg
rs = RadioSetting("settings.dtmfg", "DTMF Gain",
RadioSettingValueInteger(0, 60, val))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
if str(_mem.firmware_msg.line1) == "UVVG302":
lower = 136
upper = 174
else:
lower = 130
upper = 179
rs = RadioSetting(
"limits.vhf.lower", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.vhf.upper", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.upper))
other.append(rs)
if str(_mem.firmware_msg.line1) == "UVVG302":
lower = 200
upper = 230
else:
lower = 220
upper = 225
rs = RadioSetting(
"limits.vhf2.lower", "VHF2 Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf2.lower))
other.append(rs)
rs = RadioSetting(
"limits.vhf2.upper", "VHF2 Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf2.upper))
other.append(rs)
if str(_mem.firmware_msg.line1) == "UVVG302":
lower = 400
upper = 480
else:
lower = 400
upper = 520
rs = RadioSetting(
"limits.uhf.lower", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.uhf.upper", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.upper))
other.append(rs)
# Work mode settings
rs = RadioSetting(
"settings.displayab", "Display",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting(
"settings.workmode", "VFO/MR Mode",
RadioSettingValueList(LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.workmode]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrchb))
work.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
_vhf_lower = int(_mem.limits.vhf.lower)
_vhf_upper = int(_mem.limits.vhf.upper)
_vhf2_lower = int(_mem.limits.vhf2.lower)
_vhf2_upper = int(_mem.limits.vhf2.upper)
_uhf_lower = int(_mem.limits.uhf.lower)
_uhf_upper = int(_mem.limits.uhf.upper)
value = chirp_common.parse_freq(value)
msg = ("Can't be less than %i.0000")
if value > 99000000 and value < _vhf_lower * 1000000:
raise InvalidValueError(msg % (_vhf_lower))
msg = ("Can't be between %i.9975-%i.0000")
if (_vhf_upper + 1) * 1000000 <= value and \
value < _vhf2_lower * 1000000:
raise InvalidValueError(msg % (_vhf_upper, _vhf2_lower))
if (_vhf2_upper + 1) * 1000000 <= value and \
value < _uhf_lower * 1000000:
raise InvalidValueError(msg % (_vhf2_upper, _uhf_lower))
msg = ("Can't be greater than %i.9975")
if value > 99000000 and value >= (_uhf_upper + 1) * 1000000:
raise InvalidValueError(msg % (_uhf_upper))
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.sftd", "VFO A Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)
rs = RadioSetting(
"vfo.b.sftd", "VFO B Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset", "VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset", "VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.txpower", "VFO A Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.a.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.b.txpower", "VFO B Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.b.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.a.widenarr", "VFO A Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.b.widenarr", "VFO B Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)
rs = RadioSetting(
"vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF encode settings
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 16, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("pttid/%i.code" % i, "Signal Code %i" % (i + 1),
val)
def apply_code(setting, obj):
code = []
for j in range(0, 16):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmfe.append(rs)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 7, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 7):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfe.append(rs)
rs = RadioSetting(
"ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# DTMF decode settings
rs = RadioSetting("ani.mastervice", "Master and Vice ID",
RadioSettingValueBoolean(_mem.ani.mastervice))
dtmfd.append(rs)
_codeobj = _mem.ani.masterid
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.masterid", "Master Control ID", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.masterid = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
rs = RadioSetting("ani.minspection", "Master Inspection",
RadioSettingValueBoolean(_mem.ani.minspection))
dtmfd.append(rs)
rs = RadioSetting("ani.mmonitor", "Master Monitor",
RadioSettingValueBoolean(_mem.ani.mmonitor))
dtmfd.append(rs)
rs = RadioSetting("ani.mstun", "Master Stun",
RadioSettingValueBoolean(_mem.ani.mstun))
dtmfd.append(rs)
rs = RadioSetting("ani.mkill", "Master Kill",
RadioSettingValueBoolean(_mem.ani.mkill))
dtmfd.append(rs)
rs = RadioSetting("ani.mrevive", "Master Revive",
RadioSettingValueBoolean(_mem.ani.mrevive))
dtmfd.append(rs)
_codeobj = _mem.ani.viceid
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.viceid", "Vice Control ID", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.viceid = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
rs = RadioSetting("ani.vinspection", "Vice Inspection",
RadioSettingValueBoolean(_mem.ani.vinspection))
dtmfd.append(rs)
rs = RadioSetting("ani.vmonitor", "Vice Monitor",
RadioSettingValueBoolean(_mem.ani.vmonitor))
dtmfd.append(rs)
rs = RadioSetting("ani.vstun", "Vice Stun",
RadioSettingValueBoolean(_mem.ani.vstun))
dtmfd.append(rs)
rs = RadioSetting("ani.vkill", "Vice Kill",
RadioSettingValueBoolean(_mem.ani.vkill))
dtmfd.append(rs)
rs = RadioSetting("ani.vrevive", "Vice Revive",
RadioSettingValueBoolean(_mem.ani.vrevive))
dtmfd.append(rs)
_codeobj = _mem.ani.inspection
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.inspection", "Inspection Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.inspection = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.monitor
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.monitor", "Monitor Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.monitor = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.alarmcode
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.alarm", "Alarm Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.alarmcode = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.stun
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.stun", "Stun Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.stun = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.kill
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.kill", "Kill Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.kill = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.revive
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.revive", "Revive Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.revive = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
def apply_dmtf_listvalue(setting, obj):
LOG.debug("Setting value: " + str(setting.value) + " from list")
val = str(setting.value)
index = LIST_DTMF_SPECIAL_DIGITS.index(val)
val = LIST_DTMF_SPECIAL_VALUES[index]
obj.set_value(val)
if _mem.ani.groupcode in LIST_DTMF_SPECIAL_VALUES:
idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.ani.groupcode)
else:
idx = LIST_DTMF_SPECIAL_VALUES.index(0x0B)
rs = RadioSetting(
"ani.groupcode", "Group Code",
RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS,
LIST_DTMF_SPECIAL_DIGITS[idx]))
rs.set_apply_callback(apply_dmtf_listvalue, _mem.ani.groupcode)
dtmfd.append(rs)
if _mem.ani.spacecode in LIST_DTMF_SPECIAL_VALUES:
idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.ani.spacecode)
else:
idx = LIST_DTMF_SPECIAL_VALUES.index(0x0C)
rs = RadioSetting(
"ani.spacecode", "Space Code",
RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS,
LIST_DTMF_SPECIAL_DIGITS[idx]))
rs.set_apply_callback(apply_dmtf_listvalue, _mem.ani.spacecode)
dtmfd.append(rs)
if _mem.ani.resettime > 0x9F:
val = 0x4F
else:
val = _mem.ani.resettime
rs = RadioSetting(
"ani.resettime", "Reset Time",
RadioSettingValueList(LIST_RESETTIME, LIST_RESETTIME[val]))
dtmfd.append(rs)
if _mem.ani.delayproctime > 0x27:
val = 0x04
else:
val = _mem.ani.delayproctime
rs = RadioSetting(
"ani.delayproctime", "Delay Processing Time",
RadioSettingValueList(LIST_DELAYPROCTIME, LIST_DELAYPROCTIME[val]))
dtmfd.append(rs)
# Service settings
for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "squelch.%s.sql%i" % (band, index)
if band == "vhf":
_obj = self._memobj.squelch.vhf
elif band == "uhf":
_obj = self._memobj.squelch.uhf
val = RadioSettingValueInteger(
0, 123, getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def _get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
group = RadioSettings(basic, advanced)
rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)
rs = RadioSetting("save", "Battery Saver",
RadioSettingValueInteger(0, 4, _settings.save))
basic.append(rs)
rs = RadioSetting("abr", "Backlight",
RadioSettingValueBoolean(_settings.abr))
basic.append(rs)
rs = RadioSetting("tdr", "Dual Watch (BDR)",
RadioSettingValueBoolean(_settings.tdr))
advanced.append(rs)
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
RadioSettingValueList(
uv5r.TDRAB_LIST,
uv5r.TDRAB_LIST[_settings.tdrab]))
advanced.append(rs)
rs = RadioSetting("alarm", "Alarm",
RadioSettingValueBoolean(_settings.alarm))
advanced.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(
uv5r.TIMEOUT_LIST,
uv5r.TIMEOUT_LIST[_settings.timeout]))
basic.append(rs)
rs = RadioSetting("screv", "Scan Resume",
RadioSettingValueList(
uv5r.RESUME_LIST,
uv5r.RESUME_LIST[_settings.screv]))
advanced.append(rs)
rs = RadioSetting("mdfa", "Display Mode (A)",
RadioSettingValueList(
uv5r.MODE_LIST, uv5r.MODE_LIST[_settings.mdfa]))
basic.append(rs)
rs = RadioSetting("mdfb", "Display Mode (B)",
RadioSettingValueList(
uv5r.MODE_LIST, uv5r.MODE_LIST[_settings.mdfb]))
basic.append(rs)
rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)
rs = RadioSetting("fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)
rs = RadioSetting("wtled", "Standby LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.wtled]))
basic.append(rs)
rs = RadioSetting("rxled", "RX LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.rxled]))
basic.append(rs)
rs = RadioSetting("txled", "TX LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.txled]))
basic.append(rs)
rs = RadioSetting("reset", "RESET Menu",
RadioSettingValueBoolean(_settings.reset))
advanced.append(rs)
rs = RadioSetting("menu", "All Menus",
RadioSettingValueBoolean(_settings.menu))
advanced.append(rs)
if len(self._mmap.get_packed()) == 0x1808:
# Old image, without aux block
return group
other = RadioSettingGroup("other", "Other Settings")
group.append(other)
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = self._memobj.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
limit = "limits"
vhf_limit = getattr(self._memobj, limit).vhf
rs = RadioSetting("%s.vhf.lower" % limit, "VHF Lower Limit (MHz)",
RadioSettingValueInteger(
1, 1000, vhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.vhf.upper" % limit, "VHF Upper Limit (MHz)",
RadioSettingValueInteger(
1, 1000, vhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.vhf.enable" % limit, "VHF TX Enabled",
RadioSettingValueBoolean(vhf_limit.enable))
other.append(rs)
uhf_limit = getattr(self._memobj, limit).uhf
rs = RadioSetting("%s.uhf.lower" % limit, "UHF Lower Limit (MHz)",
RadioSettingValueInteger(
1, 1000, uhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.uhf.upper" % limit, "UHF Upper Limit (MHz)",
RadioSettingValueInteger(
1, 1000, uhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.uhf.enable" % limit, "UHF TX Enabled",
RadioSettingValueBoolean(uhf_limit.enable))
other.append(rs)
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
group.append(workmode)
options = ["A", "B"]
rs = RadioSetting("displayab", "Display Selected",
RadioSettingValueList(
options, options[_settings.displayab]))
workmode.append(rs)
options = ["Frequency", "Channel"]
rs = RadioSetting("workmode", "VFO/MR Mode",
RadioSettingValueList(
options, options[_settings.workmode]))
workmode.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
workmode.append(rs)
_mrcna = self._memobj.wmchannel.mrcha
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mrcna))
workmode.append(rs)
_mrcnb = self._memobj.wmchannel.mrchb
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mrcnb))
workmode.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
raise InvalidValueError("Can't be between 174.00000-400.00000")
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_freq(self._memobj.vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_freq(self._memobj.vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, self._memobj.vfob)
workmode.append(rs)
options = ["Off", "+", "-"]
rs = RadioSetting("vfoa.sftd", "VFO A Shift",
RadioSettingValueList(
options, options[self._memobj.vfoa.sftd]))
workmode.append(rs)
rs = RadioSetting("vfob.sftd", "VFO B Shift",
RadioSettingValueList(
options, options[self._memobj.vfob.sftd]))
workmode.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 10000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10000
for i in range(3, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(self._memobj.vfoa.offset))
rs = RadioSetting("vfoa.offset", "VFO A Offset (0.00-69.95)", val1a)
rs.set_apply_callback(apply_offset, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(self._memobj.vfob.offset))
rs = RadioSetting("vfob.offset", "VFO B Offset (0.00-69.95)", val1b)
rs.set_apply_callback(apply_offset, self._memobj.vfob)
workmode.append(rs)
options = ["High", "Low"]
rs = RadioSetting("vfoa.txpower", "VFO A Power",
RadioSettingValueList(
options, options[self._memobj.vfoa.txpower]))
workmode.append(rs)
rs = RadioSetting("vfob.txpower", "VFO B Power",
RadioSettingValueList(
options, options[self._memobj.vfob.txpower]))
workmode.append(rs)
options = ["Wide", "Narrow"]
rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(
options, options[self._memobj.vfoa.widenarr]))
workmode.append(rs)
rs = RadioSetting("vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(
options, options[self._memobj.vfob.widenarr]))
workmode.append(rs)
options = ["%s" % x for x in range(1, 16)]
rs = RadioSetting("vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(
options, options[self._memobj.vfoa.scode]))
workmode.append(rs)
rs = RadioSetting("vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(
options, options[self._memobj.vfob.scode]))
workmode.append(rs)
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(
STEP_LIST, STEP_LIST[self._memobj.vfoa.step]))
workmode.append(rs)
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
RadioSettingValueList(
STEP_LIST, STEP_LIST[self._memobj.vfob.step]))
workmode.append(rs)
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Preset")
group.append(fm_preset)
preset = self._memobj.fm_preset / 10.0 + 87
rs = RadioSetting("fm_preset", "FM Preset(MHz)",
RadioSettingValueFloat(87, 107.5, preset, 0.1, 1))
fm_preset.append(rs)
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group.append(dtmf)
dtmfchars = "0123456789 *#ABCD"
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i,
"PTT ID Code %i" % (i + 1), val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
options = ["Off", "BOT", "EOT", "Both"]
rs = RadioSetting("ani.aniid", "ANI ID",
RadioSettingValueList(
options, options[self._memobj.ani.aniid]))
dtmf.append(rs)
_codeobj = self._memobj.ani.alarmcode
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.alarmcode", "Alarm Code", val)
def apply_code(setting, obj):
alarmcode = []
for j in range(5):
try:
alarmcode.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
alarmcode.append(0xFF)
obj.alarmcode = alarmcode
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
rs = RadioSetting("dtmfst", "DTMF Sidetone",
RadioSettingValueList(
uv5r.DTMFST_LIST,
uv5r.DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(
uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfon]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(
uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfoff]))
dtmf.append(rs)
return group