def slotRtop(self):
self.Rtop = RtopPanel()
self.Rtop.exec_()
class TopoClusterLevel(QtGui.QWidget):
def __init__(self):
super(TopoClusterLevel, self).__init__()
self.font = QtGui.QFont()
self.initUI()
def slotLCCA(self):
self.lccaControl = LCCAControl()
self.lccaControl.exec_()
def slotClusterNode(self):
self.clusterNodeControl = ClusterNodeControl()
self.clusterNodeControl.exec_()
def slotRtop(self):
self.Rtop = RtopPanel()
self.Rtop.exec_()
def makeActionButton(self, name, tooltip, sizeX, sizeY):
button = QtGui.QPushButton(name)
button.setToolTip(tooltip)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
color = button.palette()
color.setColor(button.backgroundRole(), QtGui.QColor(0, 102, 187))
color.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255, 255, 255))
button.setPalette(color)
return button
def makeHardwareButton(self, label, tooltip, state, sizeX, sizeY,
drillDownData):
button = QtGui.QPushButton(label)
button.setToolTip(tooltip)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
buttonsColor = button.palette()
if state == 0: #HARDWARE UP AND GOOD STATE
buttonsColor.setColor(button.backgroundRole(),
QtGui.QColor(0, 102, 0))
buttonsColor.setColor(QtGui.QPalette.ButtonText,
QtGui.QColor(255, 255, 255))
elif state == 1: #HARDWARE DOWN OR BAD STATE
buttonsColor.setColor(button.backgroundRole(),
QtGui.QColor(221, 0, 0))
buttonsColor.setColor(QtGui.QPalette.ButtonText,
QtGui.QColor(255, 255, 255))
elif state == 2: #HARDWARE HAS NON-CRITICAL ISSUES
buttonsColor.setColor(button.backgroundRole(),
QtGui.QColor(255, 221, 68))
buttonsColor.setColor(QtGui.QPalette.ButtonText,
QtGui.QColor(255, 255, 255))
elif state == 3: #NO HARDWARE PRESENT STATE
button.setEnabled(False)
button.setPalette(buttonsColor)
return button
def makeBCButton(self, machine, rack, state, sizeX, sizeY, drillDownData,
firstBlade, lastBlade):
if ('001' in machine):
whichBlades = 'Blade Center 1: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc1Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc1Button, rack)
elif ('002' in machine):
whichBlades = 'Blade Center 2: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc2Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc2Button, rack)
elif ('003' in machine):
whichBlades = 'Blade Center 3: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc3Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc3Button, rack)
elif ('004' in machine):
whichBlades = 'Blade Center 4: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc4Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc4Button, rack)
elif ('005' in machine):
whichBlades = 'Blade Center 5: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc5Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc5Button, rack)
elif ('006' in machine):
whichBlades = 'Blade Center 6: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc6Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc6Button, rack)
elif ('007' in machine):
whichBlades = 'Blade Center 7: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc7Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc7Button, rack)
elif ('008' in machine):
whichBlades = 'Blade Center 8: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc8Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc8Button, rack)
elif ('009' in machine):
whichBlades = 'Blade Center 9: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc9Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc9Button, rack)
elif ('010' in machine):
whichBlades = 'Blade Center 10: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc10Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc10Button, rack)
elif ('011' in machine):
whichBlades = 'Blade Center 11: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc11Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc11Button, rack)
elif ('012' in machine):
whichBlades = 'Blade Center 12: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc12Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc12Button, rack)
elif ('013' in machine):
whichBlades = 'Blade Center 13: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc13Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc13Button, rack)
elif ('014' in machine):
whichBlades = 'Blade Center 14: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc14Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc14Button, rack)
elif ('015' in machine):
whichBlades = 'Blade Center 15: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc15Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc15Button, rack)
elif ('016' in machine):
whichBlades = 'Blade Center 16: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc16Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc16Button, rack)
elif ('017' in machine):
whichBlades = 'Blade Center 17: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc17Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc17Button, rack)
elif ('018' in machine):
whichBlades = 'Blade Center 18: Blades %i-%i' % (firstBlade,
lastBlade)
self.bc18Button = self.makeHardwareButton(machine, whichBlades,
state, sizeX, sizeY,
drillDownData)
self.placeBCButton(self.bc18Button, rack)
def placeBCButton(self, button, rack):
if (rack == 1):
self.rack1Layout.addWidget(button)
elif (rack == 2):
self.rack2Layout.addWidget(button)
elif (rack == 3):
self.rack3Layout.addWidget(button)
def initUI(self):
# This will be used to to set the window's layout
self.layout = QtGui.QVBoxLayout()
# Make the top nav bar for switching views and opening rtop
topBarLayout = QtGui.QHBoxLayout()
topBarFrame = QtGui.QFrame()
topBarFrame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rtopButton = self.makeActionButton(
'RTOP',
'Launch blade, LCCA,\nand management node\nmonitor utility', 330,
60)
self.rtopButton.clicked.connect(self.slotRtop)
topBarLayout.addWidget(self.rtopButton)
topBarFrame.setLayout(topBarLayout)
hardwareLayout = QtGui.QHBoxLayout()
self.hardwareList = ClusterData.managementNodeData
for i in self.hardwareList:
if ('LCCA' in i[0]):
lccaButton = self.makeHardwareButton(
i[0], 'Open LCCA Control Panel', i[1], 130, 440, i[2])
lccaButton.clicked.connect(self.slotLCCA)
else:
clusterManageButton = self.makeHardwareButton(
i[0], 'Open Cluster Management Control Panel', i[1], 130,
440, i[2])
clusterManageButton.clicked.connect(self.slotClusterNode)
# Placement requires that the Cluster Management button be placed farthest left.
# followed by the LCCA and then the Blade Racks with the Blade Center buttons stacked vertically
hardwareLayout.addWidget(clusterManageButton)
hardwareLayout.addWidget(lccaButton)
#lccaButton.clicked.connect(lambda: self.slotLCCA(*PASS DATA THROUGH HERE*))
#clusterManagementButton.clicked.connect(lambda: self.slotClusterNode(*PASS DATA THROUGH HERE*))
self.rack1Layout = QtGui.QVBoxLayout()
rack1Frame = QtGui.QFrame()
rack1Frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rack2Layout = QtGui.QVBoxLayout()
rack2Frame = QtGui.QFrame()
rack2Frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rack3Layout = QtGui.QVBoxLayout()
rack3Frame = QtGui.QFrame()
rack3Frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rackData = ClusterData.topographData
sizeX = 115
sizeY = 65
for i in self.rackData:
#self.makeBCButton(machine, rack, state, sizeX, sizeY, drilldownData, firstBlade, lastBlade)
self.makeBCButton(i[0], i[1], i[2], sizeX, sizeY, i[3], i[4], i[5])
rack1Frame.setLayout(self.rack1Layout)
rack2Frame.setLayout(self.rack2Layout)
rack3Frame.setLayout(self.rack3Layout)
hardwareLayout.addWidget(rack1Frame)
hardwareLayout.addWidget(rack2Frame)
hardwareLayout.addWidget(rack3Frame)
# Pack widgets and layouts
self.layout.addWidget(topBarFrame)
self.layout.addLayout(hardwareLayout)
# Finalize layout of window and show
self.setLayout(self.layout)
self.move(300, 150)
self.setWindowTitle('CLUSTER MAIN VIEW')
self.setGeometry(50, 50, 725, 500)
self.show()
def slotRtop(self):
self.Rtop = RtopPanel()
self.Rtop.exec_()
class TopoClusterLevel(QtGui.QWidget):
def __init__(self):
super(TopoClusterLevel, self).__init__()
self.font = QtGui.QFont()
self.initUI()
def slotLCCA(self):
self.lccaControl = LCCAControl()
self.lccaControl.exec_()
def slotClusterNode(self):
self.clusterNodeControl = ClusterNodeControl()
self.clusterNodeControl.exec_()
def slotRtop(self):
self.Rtop = RtopPanel()
self.Rtop.exec_()
def makeActionButton(self, name, tooltip, sizeX, sizeY):
button = QtGui.QPushButton(name)
button.setToolTip(tooltip)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
color = button.palette()
color.setColor(button.backgroundRole(), QtGui.QColor(0,102,187))
color.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
button.setPalette(color)
return button
def makeHardwareButton(self, label, tooltip, state, sizeX, sizeY, drillDownData):
button = QtGui.QPushButton(label)
button.setToolTip(tooltip)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
buttonsColor = button.palette()
if state == 0: #HARDWARE UP AND GOOD STATE
buttonsColor.setColor(button.backgroundRole(), QtGui.QColor(0,102,0))
buttonsColor.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
elif state == 1: #HARDWARE DOWN OR BAD STATE
buttonsColor.setColor(button.backgroundRole(), QtGui.QColor(221,0,0))
buttonsColor.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
elif state == 2: #HARDWARE HAS NON-CRITICAL ISSUES
buttonsColor.setColor(button.backgroundRole(), QtGui.QColor(255,221,68))
buttonsColor.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
elif state == 3: #NO HARDWARE PRESENT STATE
button.setEnabled(False)
button.setPalette(buttonsColor)
return button
def makeBCButton(self, machine, rack, state, sizeX, sizeY, drillDownData, firstBlade, lastBlade):
if ('001' in machine):
whichBlades = 'Blade Center 1: Blades %i-%i' % (firstBlade, lastBlade)
self.bc1Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc1Button, rack)
elif ('002' in machine):
whichBlades = 'Blade Center 2: Blades %i-%i' % (firstBlade, lastBlade)
self.bc2Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc2Button, rack)
elif ('003' in machine):
whichBlades = 'Blade Center 3: Blades %i-%i' % (firstBlade, lastBlade)
self.bc3Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc3Button, rack)
elif ('004' in machine):
whichBlades = 'Blade Center 4: Blades %i-%i' % (firstBlade, lastBlade)
self.bc4Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc4Button, rack)
elif ('005' in machine):
whichBlades = 'Blade Center 5: Blades %i-%i' % (firstBlade, lastBlade)
self.bc5Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc5Button, rack)
elif ('006' in machine):
whichBlades = 'Blade Center 6: Blades %i-%i' % (firstBlade, lastBlade)
self.bc6Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc6Button, rack)
elif ('007' in machine):
whichBlades = 'Blade Center 7: Blades %i-%i' % (firstBlade, lastBlade)
self.bc7Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc7Button, rack)
elif ('008' in machine):
whichBlades = 'Blade Center 8: Blades %i-%i' % (firstBlade, lastBlade)
self.bc8Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc8Button, rack)
elif ('009' in machine):
whichBlades = 'Blade Center 9: Blades %i-%i' % (firstBlade, lastBlade)
self.bc9Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc9Button, rack)
elif ('010' in machine):
whichBlades = 'Blade Center 10: Blades %i-%i' % (firstBlade, lastBlade)
self.bc10Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc10Button, rack)
elif ('011' in machine):
whichBlades = 'Blade Center 11: Blades %i-%i' % (firstBlade, lastBlade)
self.bc11Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc11Button, rack)
elif ('012' in machine):
whichBlades = 'Blade Center 12: Blades %i-%i' % (firstBlade, lastBlade)
self.bc12Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc12Button, rack)
elif ('013' in machine):
whichBlades = 'Blade Center 13: Blades %i-%i' % (firstBlade, lastBlade)
self.bc13Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc13Button, rack)
elif ('014' in machine):
whichBlades = 'Blade Center 14: Blades %i-%i' % (firstBlade, lastBlade)
self.bc14Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc14Button, rack)
elif ('015' in machine):
whichBlades = 'Blade Center 15: Blades %i-%i' % (firstBlade, lastBlade)
self.bc15Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc15Button, rack)
elif ('016' in machine):
whichBlades = 'Blade Center 16: Blades %i-%i' % (firstBlade, lastBlade)
self.bc16Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc16Button, rack)
elif ('017' in machine):
whichBlades = 'Blade Center 17: Blades %i-%i' % (firstBlade, lastBlade)
self.bc17Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc17Button, rack)
elif ('018' in machine):
whichBlades = 'Blade Center 18: Blades %i-%i' % (firstBlade, lastBlade)
self.bc18Button = self.makeHardwareButton(machine, whichBlades, state, sizeX, sizeY, drillDownData)
self.placeBCButton(self.bc18Button, rack)
def placeBCButton(self, button, rack):
if (rack == 1):
self.rack1Layout.addWidget(button)
elif (rack == 2):
self.rack2Layout.addWidget(button)
elif (rack == 3):
self.rack3Layout.addWidget(button)
def initUI(self):
# This will be used to to set the window's layout
self.layout = QtGui.QVBoxLayout()
# Make the top nav bar for switching views and opening rtop
topBarLayout = QtGui.QHBoxLayout()
topBarFrame = QtGui.QFrame()
topBarFrame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rtopButton = self.makeActionButton('RTOP', 'Launch blade, LCCA,\nand management node\nmonitor utility', 330, 60)
self.rtopButton.clicked.connect(self.slotRtop)
topBarLayout.addWidget(self.rtopButton)
topBarFrame.setLayout(topBarLayout)
hardwareLayout = QtGui.QHBoxLayout()
self.hardwareList = ClusterData.managementNodeData
for i in self.hardwareList:
if ('LCCA' in i[0]):
lccaButton = self.makeHardwareButton(i[0], 'Open LCCA Control Panel', i[1], 130, 440, i[2])
lccaButton.clicked.connect(self.slotLCCA)
else:
clusterManageButton = self.makeHardwareButton(i[0], 'Open Cluster Management Control Panel', i[1], 130, 440, i[2])
clusterManageButton.clicked.connect(self.slotClusterNode)
# Placement requires that the Cluster Management button be placed farthest left.
# followed by the LCCA and then the Blade Racks with the Blade Center buttons stacked vertically
hardwareLayout.addWidget(clusterManageButton)
hardwareLayout.addWidget(lccaButton)
#lccaButton.clicked.connect(lambda: self.slotLCCA(*PASS DATA THROUGH HERE*))
#clusterManagementButton.clicked.connect(lambda: self.slotClusterNode(*PASS DATA THROUGH HERE*))
self.rack1Layout = QtGui.QVBoxLayout()
rack1Frame = QtGui.QFrame()
rack1Frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rack2Layout = QtGui.QVBoxLayout()
rack2Frame = QtGui.QFrame()
rack2Frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rack3Layout = QtGui.QVBoxLayout()
rack3Frame = QtGui.QFrame()
rack3Frame.setFrameShape(QtGui.QFrame.StyledPanel)
self.rackData = ClusterData.topographData
sizeX = 115
sizeY = 65
for i in self.rackData:
#self.makeBCButton(machine, rack, state, sizeX, sizeY, drilldownData, firstBlade, lastBlade)
self.makeBCButton(i[0], i[1], i[2], sizeX, sizeY, i[3], i[4], i[5])
rack1Frame.setLayout(self.rack1Layout)
rack2Frame.setLayout(self.rack2Layout)
rack3Frame.setLayout(self.rack3Layout)
hardwareLayout.addWidget(rack1Frame)
hardwareLayout.addWidget(rack2Frame)
hardwareLayout.addWidget(rack3Frame)
# Pack widgets and layouts
self.layout.addWidget(topBarFrame)
self.layout.addLayout(hardwareLayout)
# Finalize layout of window and show
self.setLayout(self.layout)
self.move(300, 150)
self.setWindowTitle('CLUSTER MAIN VIEW')
self.setGeometry(50, 50, 725, 500)
self.show()
class TopoBCenterLevel(QtGui.QWidget):
def __init__(self, data):
super(TopoBCenterLevel, self).__init__()
self.font = QtGui.QFont()
self.initUI(data)
def slotBlade(self, dynamicData):
self.blade = BladeControl(dynamicData)
self.blade.exec_()
def slotAMM(self):
self.AMM = AMMControl()
self.AMM.exec_()
def slotSwitch(self):
self.Switch = SwitchControl()
self.Switch.exec_()
def slotBCPanel(self):
self.bcControl = BladeCenterPanel()
self.bcControl.exec_()
def slotRtop(self):
self.Rtop = RtopPanel()
self.Rtop.exec_()
def slotMediaTray(self, bladeAssign):
self.trayAssignment = ClusterMediaTray(bladeAssign)
self.trayAssignment.exec_()
def makeActionButton(self, name, tooltip, sizeX, sizeY):
button = QtGui.QPushButton(name)
button.setToolTip(tooltip)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
color = button.palette()
color.setColor(button.backgroundRole(), QtGui.QColor(0, 102, 187))
color.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255, 255, 255))
button.setPalette(color)
return button
def makeHardwareButton(self, label, state, sizeX, sizeY, drillDownData,
statusInfoArray):
button = QtGui.QPushButton(label)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
# Make Tooltip to display status of hardware button
# checkIfLast - check if last element being added to the string; removes the '\n' from last line
statusString = ''
checkIfLast = 0
for i in statusInfoArray:
if checkIfLast != len(statusInfoArray) - 1:
statusString += i + '\n'
else:
statusString += i
checkIfLast += 1
button.setToolTip(statusString)
buttonsColor = button.palette()
if state == 0: #HARDWARE UP AND GOOD STATE
buttonsColor.setColor(button.backgroundRole(),
QtGui.QColor(0, 102, 0))
buttonsColor.setColor(QtGui.QPalette.ButtonText,
QtGui.QColor(255, 255, 255))
elif state == 1: #HARDWARE DOWN OR BAD STATE
buttonsColor.setColor(button.backgroundRole(),
QtGui.QColor(221, 0, 0))
buttonsColor.setColor(QtGui.QPalette.ButtonText,
QtGui.QColor(255, 255, 255))
elif state == 2: #HARDWARE HAS NON-CRITICAL ISSUES
buttonsColor.setColor(button.backgroundRole(),
QtGui.QColor(255, 221, 68))
buttonsColor.setColor(QtGui.QPalette.ButtonText,
QtGui.QColor(255, 255, 255))
elif state == 3: #NO HARDWARE PRESENT STATE
button.setEnabled(False)
button.setPalette(buttonsColor)
# What are we connecting the button to?
if ('ADVANCED\nMANAGEMENT\nMODULE' == label):
button.clicked.connect(self.slotAMM)
elif ('SWITCH\nMODULE\n001' == label):
button.clicked.connect(self.slotSwitch)
elif ('SWITCH\nMODULE\n002' == label):
button.clicked.connect(self.slotSwitch)
# The media tray is a special case and the drillDown data passed for its call
# is meant to set a parameter to the first blade in the bladecenter as default
# for the media tray assignment, this will need to be swapped for the actual assignment of
# the media tray, when the backend in implemented
elif ('MEDIA\nTRAY' == label):
button.clicked.connect(
lambda: self.slotMediaTray(drillDownData[0][0]))
else:
button.clicked.connect(lambda: self.slotBlade(drillDownData))
return button
def initUI(self, data):
# This will be used to to set the window's layout
self.layout = QtGui.QVBoxLayout()
topBarLayout = QtGui.QHBoxLayout()
topLeftLayout = QtGui.QHBoxLayout()
topRightLayout = QtGui.QHBoxLayout()
topLeftFrame = QtGui.QFrame()
topRightFrame = QtGui.QFrame()
topLeftFrame.setFrameShape(QtGui.QFrame.StyledPanel)
topRightFrame.setFrameShape(QtGui.QFrame.StyledPanel)
self.backButton = self.makeActionButton('BACK',
'Return to high-level view',
158, 60)
self.bladeRebootButton = self.makeActionButton(
'REBOOT\nERROR BLADES',
'Perform automated shutdown\nand boot up procedures\nto all blades with errors\nin this blade center',
156, 60)
self.bcPanelButton = self.makeActionButton(
'BLADE CENTER\nPANEL',
'Open information panel\nfor the blade center', 158, 60)
self.rtopButton = self.makeActionButton(
'RTOP',
'Launch blade, LCCA,\nand management node\nmonitor utility', 158,
60)
self.bcPanelButton.clicked.connect(self.slotBCPanel)
self.rtopButton.clicked.connect(self.slotRtop)
topLeftLayout.addWidget(self.backButton)
topRightLayout.addWidget(self.bcPanelButton)
topRightLayout.addWidget(self.bladeRebootButton)
topRightLayout.addWidget(self.rtopButton)
topLeftFrame.setLayout(topLeftLayout)
topRightFrame.setLayout(topRightLayout)
topBarLayout.addWidget(topLeftFrame)
topBarLayout.addWidget(topRightFrame)
# Make grid layout for the array buttons
bladeGrid = QtGui.QGridLayout()
hardwareGrid = QtGui.QGridLayout()
# ----------------- THE DATA! ---------------------
# machineDataArray - based on the data passed in
#
# Template, each entry - [ bladeNum, bladeState, [ cpuRate, memoryRate, rx, tx ] ]
#dynamicInfo = [ [ '1', 0, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '2', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '3', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '4', 2, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '5', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '6', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '7', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '8', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '9', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '10', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '11', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '12', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '13', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '14', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'AMM', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'SWITCH\nMODULE\n001', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'SWITCH\nMODULE\n002', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'MEDIA\nTRAY', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ] ]
j = 0 # Check for the first 14 blades
k = 0 # Incrementor
machineDataArray = data[3]
mediaTrayAssignment = data[3][0][
0] # NEEDS TO BE UPDATED (PLACEHOLDER)
for i in machineDataArray:
if (j < 14):
button = self.makeHardwareButton(i[0], i[1], 43, 300, i, i[3])
bladeGrid.addWidget(button, 0, j)
j = j + 1
else:
if ('ADVANCED' in i[0]):
button = self.makeHardwareButton(i[0], i[1], 169, 135, i,
i[3])
elif ('SWITCH' in i[0]):
button = self.makeHardwareButton(i[0], i[1], 169, 135, i,
i[3])
elif ('MEDIA' in i[0]):
# MUST CHANGE: Defaulting to giving the first blade in a blade center as the
# assignment of the media tray. When the back end is implemented, this value
# will need to be changed to whatever the media tray gives back for its assignment
button = self.makeHardwareButton(i[0], i[1], 169, 135,
machineDataArray, i[3])
# else: Throw an error
hardwareGrid.addWidget(button, 0, k)
k = k + 1
# -------------Matryoshka Assembly!---------------------
# Widgets: should each be contained in a layout
# Layouts: each get added to the main layout
self.layout.addLayout(topBarLayout)
self.layout.addLayout(bladeGrid)
self.layout.addLayout(hardwareGrid)
# Finalize layout of window and show
self.setLayout(self.layout)
self.move(300, 150)
self.setWindowTitle('BLADE CENTER VIEW')
self.setGeometry(50, 50, 700, 500)
self.show()
class TopoBCenterLevel(QtGui.QWidget):
def __init__(self, data):
super(TopoBCenterLevel, self).__init__()
self.font = QtGui.QFont()
self.initUI(data)
def slotBlade(self, dynamicData):
self.blade = BladeControl(dynamicData)
self.blade.exec_()
def slotAMM(self):
self.AMM = AMMControl()
self.AMM.exec_()
def slotSwitch(self):
self.Switch = SwitchControl()
self.Switch.exec_()
def slotBCPanel(self):
self.bcControl = BladeCenterPanel()
self.bcControl.exec_()
def slotRtop(self):
self.Rtop = RtopPanel()
self.Rtop.exec_()
def slotMediaTray(self, bladeAssign):
self.trayAssignment = ClusterMediaTray(bladeAssign)
self.trayAssignment.exec_()
def makeActionButton(self, name, tooltip, sizeX, sizeY):
button = QtGui.QPushButton(name)
button.setToolTip(tooltip)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
color = button.palette()
color.setColor(button.backgroundRole(), QtGui.QColor(0,102,187))
color.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
button.setPalette(color)
return button
def makeHardwareButton(self, label, state, sizeX, sizeY, drillDownData, statusInfoArray):
button = QtGui.QPushButton(label)
button.setMinimumSize(sizeX, sizeY)
self.font.setBold(True)
button.setFont(self.font)
# Make Tooltip to display status of hardware button
# checkIfLast - check if last element being added to the string; removes the '\n' from last line
statusString = ''
checkIfLast = 0
for i in statusInfoArray:
if checkIfLast != len(statusInfoArray) - 1:
statusString += i + '\n'
else:
statusString += i
checkIfLast += 1
button.setToolTip(statusString)
buttonsColor = button.palette()
if state == 0: #HARDWARE UP AND GOOD STATE
buttonsColor.setColor(button.backgroundRole(), QtGui.QColor(0,102,0))
buttonsColor.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
elif state == 1: #HARDWARE DOWN OR BAD STATE
buttonsColor.setColor(button.backgroundRole(), QtGui.QColor(221,0,0))
buttonsColor.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
elif state == 2: #HARDWARE HAS NON-CRITICAL ISSUES
buttonsColor.setColor(button.backgroundRole(), QtGui.QColor(255,221,68))
buttonsColor.setColor(QtGui.QPalette.ButtonText, QtGui.QColor(255,255,255))
elif state == 3: #NO HARDWARE PRESENT STATE
button.setEnabled(False)
button.setPalette(buttonsColor)
# What are we connecting the button to?
if ('ADVANCED\nMANAGEMENT\nMODULE' == label):
button.clicked.connect(self.slotAMM)
elif ('SWITCH\nMODULE\n001' == label):
button.clicked.connect(self.slotSwitch)
elif ('SWITCH\nMODULE\n002' == label):
button.clicked.connect(self.slotSwitch)
# The media tray is a special case and the drillDown data passed for its call
# is meant to set a parameter to the first blade in the bladecenter as default
# for the media tray assignment, this will need to be swapped for the actual assignment of
# the media tray, when the backend in implemented
elif ('MEDIA\nTRAY' == label):
button.clicked.connect(lambda: self.slotMediaTray(drillDownData[0][0]))
else:
button.clicked.connect(lambda: self.slotBlade(drillDownData))
return button
def initUI(self, data):
# This will be used to to set the window's layout
self.layout = QtGui.QVBoxLayout()
topBarLayout = QtGui.QHBoxLayout()
topLeftLayout = QtGui.QHBoxLayout()
topRightLayout = QtGui.QHBoxLayout()
topLeftFrame = QtGui.QFrame()
topRightFrame = QtGui.QFrame()
topLeftFrame.setFrameShape(QtGui.QFrame.StyledPanel)
topRightFrame.setFrameShape(QtGui.QFrame.StyledPanel)
self.backButton = self.makeActionButton('BACK', 'Return to high-level view', 158, 60)
self.bladeRebootButton = self.makeActionButton('REBOOT\nERROR BLADES', 'Perform automated shutdown\nand boot up procedures\nto all blades with errors\nin this blade center', 156, 60)
self.bcPanelButton = self.makeActionButton('BLADE CENTER\nPANEL', 'Open information panel\nfor the blade center', 158, 60)
self.rtopButton = self.makeActionButton('RTOP', 'Launch blade, LCCA,\nand management node\nmonitor utility', 158, 60)
self.bcPanelButton.clicked.connect(self.slotBCPanel)
self.rtopButton.clicked.connect(self.slotRtop)
topLeftLayout.addWidget(self.backButton)
topRightLayout.addWidget(self.bcPanelButton)
topRightLayout.addWidget(self.bladeRebootButton)
topRightLayout.addWidget(self.rtopButton)
topLeftFrame.setLayout(topLeftLayout)
topRightFrame.setLayout(topRightLayout)
topBarLayout.addWidget(topLeftFrame)
topBarLayout.addWidget(topRightFrame)
# Make grid layout for the array buttons
bladeGrid = QtGui.QGridLayout()
hardwareGrid = QtGui.QGridLayout()
# ----------------- THE DATA! ---------------------
# machineDataArray - based on the data passed in
#
# Template, each entry - [ bladeNum, bladeState, [ cpuRate, memoryRate, rx, tx ] ]
#dynamicInfo = [ [ '1', 0, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '2', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '3', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '4', 2, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '5', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '6', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '7', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '8', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '9', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '10', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '11', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '12', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '13', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ '14', 1, [ 100, 10, '85KB', '100KB' ], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'AMM', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'SWITCH\nMODULE\n001', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'SWITCH\nMODULE\n002', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ],
# [ 'MEDIA\nTRAY', 1, [], ['ON', 'PING-ABLE', 'SSH-ABLE', 'NO ERRORS'] ] ]
j = 0 # Check for the first 14 blades
k = 0 # Incrementor
machineDataArray = data[3]
mediaTrayAssignment = data[3][0][0] # NEEDS TO BE UPDATED (PLACEHOLDER)
for i in machineDataArray:
if (j < 14):
button = self.makeHardwareButton(i[0], i[1], 43, 300, i, i[3])
bladeGrid.addWidget(button, 0, j)
j = j + 1
else:
if ('ADVANCED' in i[0]):
button = self.makeHardwareButton(i[0], i[1], 169, 135, i, i[3])
elif ('SWITCH' in i[0]):
button = self.makeHardwareButton(i[0], i[1], 169, 135, i, i[3])
elif ('MEDIA' in i[0]):
# MUST CHANGE: Defaulting to giving the first blade in a blade center as the
# assignment of the media tray. When the back end is implemented, this value
# will need to be changed to whatever the media tray gives back for its assignment
button = self.makeHardwareButton(i[0], i[1], 169, 135, machineDataArray, i[3])
# else: Throw an error
hardwareGrid.addWidget(button, 0, k)
k = k + 1
# -------------Matryoshka Assembly!---------------------
# Widgets: should each be contained in a layout
# Layouts: each get added to the main layout
self.layout.addLayout(topBarLayout)
self.layout.addLayout(bladeGrid)
self.layout.addLayout(hardwareGrid)
# Finalize layout of window and show
self.setLayout(self.layout)
self.move(300, 150)
self.setWindowTitle('BLADE CENTER VIEW')
self.setGeometry(50, 50, 700, 500)
self.show()
