def __init__(self, command):
"""
Constructor for the Nanotube property manager.
"""
self.endPoint1 = None
self.endPoint2 = None
self.nanotube = NanotubeParameters() # A 5x5 CNT.
_superclass.__init__(self, command)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def setProps(self, props):
"""
Sets some properties. These will be used while editing the structure.
(but if the structure is read from an mmp file, this won't work. As a
fall back, it returns some constant values)
@see: InsertNanotube_EditCommand.createStructure which calls this method.
@see: self.getProps, EditNanotube_EditCommand.editStructure
"""
(_n, _m), _type, _endings, (_endPoint1, _endPoint2) = props
from cnt.model.NanotubeParameters import NanotubeParameters
self.nanotube = NanotubeParameters()
self.nanotube.setChirality(_n, _m)
self.nanotube.setType(_type)
self.nanotube.setEndings(_endings)
self.nanotube.setEndPoints(_endPoint1, _endPoint2)
def _createStructure(self):
"""
Returns the current NanotubeSegment being edited with a new nanotube
chunk.
@return : Nanotube segment that include the new nanotube chunk.
@rtype: L{NanotubeSegment}
"""
try:
# Create a new nanotube chunk using new params.
n, m, type, endings, endPoint1, endPoint2 = self._gatherParameters()
from cnt.model.NanotubeParameters import NanotubeParameters
self.nanotube = NanotubeParameters()
nanotube = self.nanotube
nanotube.setChirality(n, m)
nanotube.setType(type)
nanotube.setEndings(endings)
nanotube.setEndPoints(endPoint1, endPoint2)
position = V(0.0, 0.0, 0.0)
ntChunk = nanotube.build(self.struct.name, self.win.assy, position)
nanotube.computeEndPointsFromChunk(ntChunk) # Needed.
self.struct.addchild(ntChunk)
#WARNING 2008-03-05:
#When we actually permit modifying a nanotube without recreating it,
#then the following properties must be set in self._modifyStructure
#as well. Needs more thought.
props =(nanotube.getChirality(),
nanotube.getType(),
nanotube.getEndings(),
nanotube.getEndPoints())
self.struct.setProps(props)
return self.struct
except (PluginBug, UserError):
self.struct.kill()
raise PluginBug("Internal error while trying to recreate a NanotubeSegment.")
return None
def readmmp_info_opengroup_setitem(self, key, val, interp):
"""
[extends superclass method]
"""
#bruce 080507 refactoring (split this out of the superclass method)
if key == ['nanotube-parameters']:
# val includes all the parameters, separated by commas.
n, m, type, endings = val.split(",")
self.n = int(n)
self.m = int(m)
self.type = type.lstrip()
self.endings = endings.lstrip()
# Create the nanotube.
from cnt.model.NanotubeParameters import NanotubeParameters
self.nanotube = NanotubeParameters() # Returns a 5x5 CNT.
self.nanotube.setChirality(self.n, self.m)
self.nanotube.setType(self.type)
self.nanotube.setEndings(self.endings)
# The endpoints are recomputed every time it is edited.
else:
_superclass.readmmp_info_opengroup_setitem(self, key, val, interp)
return
def modifyStructure_NEW_SEGMENT_RESIZE(self): #@ NOT FIXED
"""
Called when a resize handle is dragged to change the length of the
segment. (Called upon leftUp) . This method assigns the new parameters
for the segment after it is resized and calls
preview_or_finalize_structure which does the rest of the job.
Note that Client should call this public method and should never call
the private method self._modifyStructure. self._modifyStructure is
called only by self.preview_or_finalize_structure
@see: B{EditNanotube_ResizeHandle.on_release} (the caller)
@see: B{SelectChunks_GraphicsMode.leftUp} (which calls the
the relevent method in DragHandler API. )
@see: B{exprs.DraggableHandle_AlongLine}, B{exprs.DragBehavior}
@see: B{self.preview_or_finalize_structure }
@see: B{self._modifyStructure}
As of 2008-02-01 it recreates the structure
@see: a note in self._createStructure() about use of ntSegment.setProps
"""
#TODO: need to cleanup this and may be use use something like
#self.previousParams = params in the end -- 2008-03-24 (midnight)
#@TODO: - rename this method from modifyStructure_NEW_SEGMENT_RESIZE
#to self.modifyStructure, after more testing
#This method is used for debug prefence:
#'Nanotube Segment: resize without recreating whole duplex'
#see also self._modifyStructure_NEW_SEGMENT_RESIZE
if self.grabbedHandle is None:
return
self.propMgr.endPoint1 = self.grabbedHandle.fixedEndOfStructure
self.propMgr.endPoint2 = self.grabbedHandle.currentPosition
DEBUG_DO_EVERYTHING_INSIDE_MODIFYSTRUCTURE_METHOD = False
if DEBUG_DO_EVERYTHING_INSIDE_MODIFYSTRUCTURE_METHOD:
# TO DO: this entire block of code. --Mark 2008-04-03
print_compact_stack("modifyStructure_NEW_SEGMENT_RESIZE(): NOT FIXED")
length = vlen(self.grabbedHandle.fixedEndOfStructure - \
self.grabbedHandle.currentPosition )
endAtom1, endAtom2 = self.struct.getAxisEndAtoms() #@
for atm in (endAtom1, endAtom2):
if not same_vals(self.grabbedHandle.fixedEndOfStructure, atm.posn()):
ladderEndAxisAtom = atm
break
endPoint1, endPoint2 = self.struct.nanotube.getEndPoints()
old_dulex_length = vlen(endPoint1 - endPoint2)
nanotubeRise = self.struct.getProps() #@
params_to_set_in_propMgr = (
self.grabbedHandle.origin,
self.grabbedHandle.currentPosition,
)
##self._modifyStructure(params)
############################################
self.nanotube = NanotubeParameters() #@ Creates 5x5 CNT. Missing PM params.
length_diff = self._determine_how_to_change_length()
ladderEndAxisAtom = self.get_axisEndAtom_at_resize_end() #@
#@ Nanotube class needs modify() method.
self.nanotube.modify(self.struct,
length_diff,
ladderEndAxisAtom.posn(),
self.grabbedHandle.currentPosition)
#TODO: Important note: How does NE1 know that structure is modified?
#Because number of base pairs parameter in the PropMgr changes as you
#drag the handle . This is done in self.getCursorText() ... not the
#right place to do it. OR that method needs to be renamed to reflect
#this as suggested in that method -- Ninad 2008-03-25
self.preview_or_finalize_structure(previewing = True)
##self.previousParams = params_to_set_in_propMgr
self.glpane.gl_update()
return
