def close(self):
"""
Close this Property manager.
"""
if self.attachedAtomsListWidget:
self.attachedAtomsListWidget.clearTags()
EditCommand_PM.close(self)
def __init__(self, win, editCommand):
"""
Constructor for the Build DNA property manager.
"""
#For model changed signal
self.previousSelectionParams = None
#Urmi 20080713: set the protein chunk name and its length
#for the first available chunk and not the selected one, that's
#not implemented as yet
#self.showProteinParametersAndSequenceEditorForInit(win)
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__(self, win, editCommand)
DebugMenuMixin._init1(self)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def update_props_if_needed_before_closing(self):
"""
This updates some cosmetic properties of the Plane (e.g. fill color,
border color, etc.) before closing the Property Manager.
"""
# Example: The Plane Property Manager is open and the user is
# 'previewing' the plane. Now the user clicks on "Build > Atoms"
# to invoke the next command (without clicking "Done").
# This calls openPropertyManager() which replaces the current PM
# with the Build Atoms PM. Thus, it creates and inserts the Plane
# that was being previewed. Before the plane is permanently inserted
# into the part, it needs to change some of its cosmetic properties
# (e.g. fill color, border color, etc.) which distinguishes it as
# a new plane in the part. This function changes those properties.
# ninad 2007-06-13
#called in updatePropertyManager in MWsemeantics.py --(Partwindow class)
EditCommand_PM.update_props_if_needed_before_closing(self)
#Don't draw the direction arrow when the object is finalized.
if self.command.struct and \
self.command.struct.offsetParentGeometry:
dirArrow = self.command.struct.offsetParentGeometry.directionArrow
dirArrow.setDrawRequested(False)
def __init__( self, win, editCommand ):
"""
Constructor for the Build DNA property manager.
"""
#For model changed signal
self.previousSelectionParams = None
#Urmi 20080713: set the protein chunk name and its length
#for the first available chunk and not the selected one, that's
#not implemented as yet
#self.showProteinParametersAndSequenceEditorForInit(win)
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__( self,
win,
editCommand)
DebugMenuMixin._init1( self )
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def close(self):
"""
Close this Property manager.
"""
if self.attachedAtomsListWidget:
self.attachedAtomsListWidget.clearTags()
EditCommand_PM.close(self)
def update_props_if_needed_before_closing(self):
"""
This updates some cosmetic properties of the Plane (e.g. fill color,
border color, etc.) before closing the Property Manager.
"""
# Example: The Plane Property Manager is open and the user is
# 'previewing' the plane. Now the user clicks on "Build > Atoms"
# to invoke the next command (without clicking "Done").
# This calls openPropertyManager() which replaces the current PM
# with the Build Atoms PM. Thus, it creates and inserts the Plane
# that was being previewed. Before the plane is permanently inserted
# into the part, it needs to change some of its cosmetic properties
# (e.g. fill color, border color, etc.) which distinguishes it as
# a new plane in the part. This function changes those properties.
# ninad 2007-06-13
#called in updatePropertyManager in MWsemeantics.py --(Partwindow class)
EditCommand_PM.update_props_if_needed_before_closing(self)
#Don't draw the direction arrow when the object is finalized.
if self.command.struct and \
self.command.struct.offsetParentGeometry:
dirArrow = self.command.struct.offsetParentGeometry.directionArrow
dirArrow.setDrawRequested(False)
def close(self):
"""
Overrides superclass close method
"""
self.sequenceEditor.hide()
env.history.statusbar_msg("")
EditCommand_PM.close(self)
return
def close(self):
"""
Overrides superclass close method
"""
self.sequenceEditor.hide()
env.history.statusbar_msg("")
EditCommand_PM.close(self)
return
def show(self):
"""
Show this PM
As of 2007-11-20, it also shows the Sequence Editor widget and hides
the history widget. This implementation may change in the near future
"""
EditCommand_PM.show(self)
self.updateListWidgets()
def close(self):
"""
Closes the Property Manager. Overrides EditCommand_PM.close()
"""
#Clear tags, if any, due to the selection in the self.strandListWidget.
if self.segmentListWidget:
self.segmentListWidget.clear()
EditCommand_PM.close(self)
def close(self):
"""
Closes the Property Manager. Overrides EditCommand_PM.close()
"""
#Clear tags, if any, due to the selection in the self.strandListWidget.
if self.segmentListWidget:
self.segmentListWidget.clear()
EditCommand_PM.close(self)
def close(self):
"""
Closes the Property Manager. Overrides EditCommand_PM.close()
"""
#Clear tags, if any, due to the selection in the self.strandListWidget.
#self.nanotubeListWidget.clear()
env.history.statusbar_msg("")
EditCommand_PM.close(self)
return
def close(self):
"""
Closes the Property Manager. Overrides EditCommand_PM.close()
"""
#Clear tags, if any, due to the selection in the self.strandListWidget.
#self.nanotubeListWidget.clear()
env.history.statusbar_msg("")
EditCommand_PM.close(self)
return
def show(self):
"""
Overrides superclass show method
"""
env.history.statusbar_msg("")
self._updateProteinListForShow()
self._showProteinParametersAndSequenceEditor()
EditCommand_PM.show(self)
self.updateMessage()
return
def show(self):
"""
Overrides superclass show method
"""
env.history.statusbar_msg("")
self._updateProteinListForShow()
self._showProteinParametersAndSequenceEditor()
EditCommand_PM.show(self)
self.updateMessage()
return
def show(self):
"""
Show this PM
As of 2007-11-20, it also shows the Sequence Editor widget and hides
the history widget. This implementation may change in the near future
"""
EditCommand_PM.show(self)
self.updateMessage("Use appropriate command in the command "\
"toolbar to create or modify a DNA Object"\
"<br>" )
def show(self):
"""
Show this PM
As of 2007-11-20, it also shows the Sequence Editor widget and hides
the history widget. This implementation may change in the near future
"""
EditCommand_PM.show(self)
self.updateMessage("Use appropriate command in the command "\
"toolbar to create or modify a DNA Object"\
"<br>" )
def show(self):
"""
Show the motor Property Manager.
"""
EditCommand_PM.show(self)
#It turns out that if updateCosmeticProps is called before
#EditCommand_PM.show, the 'preview' properties are not updated
#when you are editing an existing R.Motor. Don't know the cause at this
#time, issue is trivial. So calling it in the end -- Ninad 2007-10-03
if self.command and self.command.struct:
self.command.struct.updateCosmeticProps(previewing = True)
self.updateAttachedAtomListWidget()
def show(self):
"""
Show the motor Property Manager.
"""
EditCommand_PM.show(self)
#It turns out that if updateCosmeticProps is called before
#EditCommand_PM.show, the 'preview' properties are not updated
#when you are editing an existing R.Motor. Don't know the cause at this
#time, issue is trivial. So calling it in the end -- Ninad 2007-10-03
if self.command and self.command.struct:
self.command.struct.updateCosmeticProps(previewing = True)
self.updateAttachedAtomListWidget()
def connect_or_disconnect_signals(self, isConnect):
"""
Connect or disconnect widget signals sent to their slot methods.
This can be overridden in subclasses. By default it does nothing.
@param isConnect: If True the widget will send the signals to the slot
method.
@type isConnect: boolean
"""
if isConnect:
change_connect = self.win.connect
else:
change_connect = self.win.disconnect
EditCommand_PM.connect_or_disconnect_signals(self, isConnect)
self.attachedAtomsListWidget.connect_or_disconnect_signals(isConnect)
def __init__(self, command):
"""
Construct the Motor Property Manager.
"""
EditCommand_PM.__init__( self, command)
msg = "Attach a " + self.title + " to the selected atoms"
# This causes the "Message" box to be displayed as well.
self.updateMessage(msg)
self.glpane = self.win.glpane
# Hide Restore defaults button for Alpha9.
self.hideTopRowButtons(PM_PREVIEW_BUTTON | PM_RESTORE_DEFAULTS_BUTTON)
def show(self):
"""
Show the PM. Extends superclass method.
@note: _update_UI_do_updates() gets called immediately after this and
updates PM widgets with their correct values/settings.
"""
env.history.statusbar_msg("")
EditCommand_PM.show(self)
# NOTE: Think about moving this msg to _update_UI_do_updates() where
# custom msgs can be created based on the current selection, etc.
# Mark 2008-12-14
msg = "Select <b>Insert Nanotube</b> to create a nanotube or " "select an existing nantube to modify it."
self.updateMessage(msg)
return
def connect_or_disconnect_signals(self, isConnect):
"""
Connect or disconnect widget signals sent to their slot methods.
This can be overridden in subclasses. By default it does nothing.
@param isConnect: If True the widget will send the signals to the slot
method.
@type isConnect: boolean
"""
if isConnect:
change_connect = self.win.connect
else:
change_connect = self.win.disconnect
EditCommand_PM.connect_or_disconnect_signals(self, isConnect)
self.attachedAtomsListWidget.connect_or_disconnect_signals(isConnect)
def __init__(self, command):
"""
Construct the Motor Property Manager.
"""
EditCommand_PM.__init__( self, command)
msg = "Attach a " + self.title + " to the selected atoms"
# This causes the "Message" box to be displayed as well.
self.updateMessage(msg)
self.glpane = self.win.glpane
# Hide Restore defaults button for Alpha9.
self.hideTopRowButtons(PM_PREVIEW_BUTTON | PM_RESTORE_DEFAULTS_BUTTON)
def show(self):
"""
Show the Plane Property Manager.
"""
EditCommand_PM.show(self)
#It turns out that if updateCosmeticProps is called before
#EditCommand_PM.show, the 'preview' properties are not updated
#when you are editing an existing plane. Don't know the cause at this
#time, issue is trivial. So calling it in the end -- Ninad 2007-10-03
if self.editCommand.struct:
plane = self.editCommand.struct
plane.updateCosmeticProps(previewing=True)
if plane.imagePath:
self.imageDisplayFileChooser.setText(plane.imagePath)
self.imageDisplayCheckBox.setChecked(plane.display_image)
def show(self):
"""
Show the PM. Extends superclass method.
@note: _update_UI_do_updates() gets called immediately after this and
updates PM widgets with their correct values/settings.
"""
env.history.statusbar_msg("")
EditCommand_PM.show(self)
# NOTE: Think about moving this msg to _update_UI_do_updates() where
# custom msgs can be created based on the current selection, etc.
# Mark 2008-12-14
msg = "Select <b>Insert Nanotube</b> to create a nanotube or "\
"select an existing nantube to modify it."
self.updateMessage(msg)
return
def __init__(self, command):
"""
Constructor for the Build DNA property manager.
"""
self.current_protein = ""
self.sequenceEditor = command.win.createProteinSequenceEditorIfNeeded()
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__(self, command)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def __init__( self, command ):
"""
Constructor for the Build DNA property manager.
"""
self.current_protein = ""
self.sequenceEditor = command.win.createProteinSequenceEditorIfNeeded()
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__( self, command)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def show(self):
"""
Show the Plane Property Manager.
"""
EditCommand_PM.show(self)
#It turns out that if updateCosmeticProps is called before
#EditCommand_PM.show, the 'preview' properties are not updated
#when you are editing an existing plane. Don't know the cause at this
#time, issue is trivial. So calling it in the end -- Ninad 2007-10-03
if self.editCommand.struct:
plane = self.editCommand.struct
plane.updateCosmeticProps(previewing = True)
if plane.imagePath:
self.imageDisplayFileChooser.setText(plane.imagePath)
self.imageDisplayCheckBox.setChecked(plane.display_image)
def __init__(self, command):
"""
Constructor for the Build Nanotube property manager.
"""
# Attributes for self._update_UI_do_updates() to keep track of changes
# in these , since the last call of that method. These are used to
# determine whether certain UI updates are needed.
self._previousSelectionParams = None
self._previousStructureParams = None
self._previousCommandStackParams = None
# see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__(self, command)
self.showTopRowButtons(PM_DONE_BUTTON | PM_WHATS_THIS_BUTTON)
return
def __init__(self, win, editCommand):
"""
Constructor for the Build Nanotube property manager.
"""
#For model changed signal
self.previousSelectionParams = None
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
self.sequenceEditor = None
EditCommand_PM.__init__(self, win, editCommand)
DebugMenuMixin._init1(self)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_WHATS_THIS_BUTTON)
def __init__(self, win, planeEditCommand):
"""
Construct the Plane Property Manager.
@param plane: The plane.
@type plane: L{Plane}
"""
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__( self,
win,
planeEditCommand)
msg = "Insert a Plane parallel to the screen. Note: This feature is "\
"experimental for Alpha9 and has known bugs."
# This causes the "Message" box to be displayed as well.
self.updateMessage(msg)
# self.resized_from_glpane flag makes sure that the
#spinbox.valueChanged()
# signal is not emitted after calling spinbox.setValue.
self.resized_from_glpane = False
# Hide Preview and Restore defaults button for Alpha9.
self.hideTopRowButtons(PM_RESTORE_DEFAULTS_BUTTON)
# needed to figure out if the model has changed or not
self.previousPMParams = None
self.gridColor = black
self.gridXSpacing = 4.0
self.gridYSpacing = 4.0
self.gridLineType = 3
self.displayLabels = False
self.originLocation = LOWER_LEFT
self.displayLabelStyle = LABELS_ALONG_ORIGIN
def __init__(self, command):
"""
Constructor for the Build Nanotube property manager.
"""
#Attributes for self._update_UI_do_updates() to keep track of changes
#in these , since the last call of that method. These are used to
#determine whether certain UI updates are needed.
self._previousSelectionParams = None
self._previousStructureParams = None
self._previousCommandStackParams = None
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__(self, command)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_WHATS_THIS_BUTTON)
return
def __init__(self, win, planeEditCommand):
"""
Construct the Plane Property Manager.
@param plane: The plane.
@type plane: L{Plane}
"""
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
EditCommand_PM.__init__(self, win, planeEditCommand)
msg = "Insert a Plane parallel to the screen. Note: This feature is "\
"experimental for Alpha9 and has known bugs."
# This causes the "Message" box to be displayed as well.
self.updateMessage(msg)
# self.resized_from_glpane flag makes sure that the
#spinbox.valueChanged()
# signal is not emitted after calling spinbox.setValue.
self.resized_from_glpane = False
# Hide Preview and Restore defaults button for Alpha9.
self.hideTopRowButtons(PM_RESTORE_DEFAULTS_BUTTON)
# needed to figure out if the model has changed or not
self.previousPMParams = None
self.gridColor = black
self.gridXSpacing = 4.0
self.gridYSpacing = 4.0
self.gridLineType = 3
self.displayLabels = False
self.originLocation = LOWER_LEFT
self.displayLabelStyle = LABELS_ALONG_ORIGIN
def __init__( self, win, editCommand ):
"""
Constructor for the Build Nanotube property manager.
"""
#For model changed signal
self.previousSelectionParams = None
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
self.sequenceEditor = None
EditCommand_PM.__init__( self,
win,
editCommand)
DebugMenuMixin._init1( self )
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_WHATS_THIS_BUTTON)
def __init__(self, command):
"""
Construct the Plane Property Manager.
@param plane: The plane.
@type plane: L{Plane}
"""
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
self.gridColor = black
self.gridXSpacing = 4.0
self.gridYSpacing = 4.0
self.gridLineType = 3
self.displayLabels = False
self.originLocation = PLANE_ORIGIN_LOWER_LEFT
self.displayLabelStyle = LABELS_ALONG_ORIGIN
EditCommand_PM.__init__( self, command)
# Hide Preview and Restore defaults buttons
self.hideTopRowButtons(PM_RESTORE_DEFAULTS_BUTTON)
def show(self):
"""
Show the Plane Property Manager.
"""
EditCommand_PM.show(self)
#It turns out that if updateCosmeticProps is called before
#EditCommand_PM.show, the 'preview' properties are not updated
#when you are editing an existing plane. Don't know the cause at this
#time, issue is trivial. So calling it in the end -- Ninad 2007-10-03
if self.command.struct:
plane = self.command.struct
plane.updateCosmeticProps(previewing = True)
if plane.imagePath:
self.imageDisplayFileChooser.setText(plane.imagePath)
self.imageDisplayCheckBox.setChecked(plane.display_image)
#Make sure that the plane placement option is always set to
#'Custom' when the Plane PM is shown. This makes sure that bugs like
#2949 won't occur. Let the user change the plane placement option
#explicitely
button = self.pmPlacementOptions.getButtonById(3)
button.setChecked(True)
def __init__(self, command):
"""
Construct the Plane Property Manager.
@param plane: The plane.
@type plane: L{Plane}
"""
#see self.connect_or_disconnect_signals for comment about this flag
self.isAlreadyConnected = False
self.isAlreadyDisconnected = False
self.gridColor = black
self.gridXSpacing = 4.0
self.gridYSpacing = 4.0
self.gridLineType = 3
self.displayLabels = False
self.originLocation = PLANE_ORIGIN_LOWER_LEFT
self.displayLabelStyle = LABELS_ALONG_ORIGIN
EditCommand_PM.__init__(self, command)
# Hide Preview and Restore defaults buttons
self.hideTopRowButtons(PM_RESTORE_DEFAULTS_BUTTON)
def show(self):
"""
Show the Plane Property Manager.
"""
EditCommand_PM.show(self)
#It turns out that if updateCosmeticProps is called before
#EditCommand_PM.show, the 'preview' properties are not updated
#when you are editing an existing plane. Don't know the cause at this
#time, issue is trivial. So calling it in the end -- Ninad 2007-10-03
if self.command.struct:
plane = self.command.struct
plane.updateCosmeticProps(previewing=True)
if plane.imagePath:
self.imageDisplayFileChooser.setText(plane.imagePath)
self.imageDisplayCheckBox.setChecked(plane.display_image)
#Make sure that the plane placement option is always set to
#'Custom' when the Plane PM is shown. This makes sure that bugs like
#2949 won't occur. Let the user change the plane placement option
#explicitely
button = self.pmPlacementOptions.getButtonById(3)
button.setChecked(True)
def close(self):
self.sequenceEditor.hide()
env.history.statusbar_msg("")
EditCommand_PM.close(self)
return
def show(self):
self.showProteinParametersAndSequenceEditor(self.win)
EditCommand_PM.show(self)
return
def close(self):
self.sequenceEditor.hide()
env.history.statusbar_msg("")
EditCommand_PM.close(self)
return
def show(self):
self.showProteinParametersAndSequenceEditor(self.win)
EditCommand_PM.show(self)
return