Ejemplo n.º 1
0
    def __init__(self, address, use_wifi=False):
        """
        Initialize with its BLE address - if you don't know the address, call findMambo
        and that will discover it for you.

        You can also connect to the wifi on the FPV camera.  Do not use this if the camera is not connected.  Also,
        ensure you have connected your machine to the wifi on the camera before attempting this or it will not work.

        :param address: unique address for this mambo
        :param use_wifi: set to True to connect with wifi as well as the BLE
        """
        self.address = address
        self.use_wifi = use_wifi
        if (use_wifi):
            self.drone_connection = WifiConnection(self, drone_type="Mambo")
        else:
            if (BLEAvailable):
                self.drone_connection = BLEConnection(address, self)
            else:
                self.drone_connection = None
                color_print(
                    "ERROR: you are trying to use a BLE connection on a system that doesn't have BLE installed.",
                    "ERROR")
                return

        # intialize the command parser
        self.command_parser = DroneCommandParser()

        # initialize the sensors and the parser
        self.sensors = MamboSensors()
        self.sensor_parser = DroneSensorParser(drone_type="Mambo")
Ejemplo n.º 2
0
    def __init__(self):
        """
        Create a new Bebop object.  Assumes you have connected to the Bebop's wifi

        """
        self.drone_connection = WifiConnection(self, drone_type="Bebop")

        # intialize the command parser
        self.command_parser = DroneCommandParser()

        # initialize the sensors and the parser
        self.sensors = BebopSensors()
        self.sensor_parser = DroneSensorParser(drone_type="Bebop")
Ejemplo n.º 3
0
class Bebop:
    def __init__(self):
        """
        Create a new Bebop object.  Assumes you have connected to the Bebop's wifi

        """
        self.drone_connection = WifiConnection(self, drone_type="Bebop")

        # intialize the command parser
        self.command_parser = DroneCommandParser()

        # initialize the sensors and the parser
        self.sensors = BebopSensors()
        self.sensor_parser = DroneSensorParser(drone_type="Bebop")

    def update_sensors(self, data_type, buffer_id, sequence_number, raw_data,
                       ack):
        """
        Update the sensors (called via the wifi or ble connection)

        :param data: raw data packet that needs to be parsed
        :param ack: True if this packet needs to be ack'd and False otherwise
        """
        #print("data type is %d buffer id is %d sequence number is %d " % (data_type, buffer_id, sequence_number))
        sensor_list = self.sensor_parser.extract_sensor_values(raw_data)
        if (sensor_list is not None):
            for sensor in sensor_list:
                (sensor_name, sensor_value, sensor_enum, header_tuple) = sensor
                if (sensor_name is not None):
                    self.sensors.update(sensor_name, sensor_value, sensor_enum)
                    #print(self.sensors)
                else:
                    color_print(
                        "data type %d buffer id %d sequence number %d" %
                        (data_type, buffer_id, sequence_number), "WARN")
                    color_print(
                        "This sensor is missing (likely because we don't need it)",
                        "WARN")

        if (ack):
            self.drone_connection.ack_packet(buffer_id, sequence_number)

    def connect(self, num_retries):
        """
        Connects to the drone and re-tries in case of failure the specified number of times.  Seamlessly
        connects to either wifi or BLE depending on how you initialized it

        :param: num_retries is the number of times to retry

        :return: True if it succeeds and False otherwise
        """

        # special case for when the user tries to do BLE when it isn't available
        if (self.drone_connection is None):
            return False

        connected = self.drone_connection.connect(num_retries)
        return connected

    def disconnect(self):
        """
        Disconnect the BLE connection.  Always call this at the end of your programs to
        cleanly disconnect.

        :return: void
        """
        self.drone_connection.disconnect()

    def ask_for_state_update(self):
        """
        Ask for a full state update (likely this should never be used but it can be called if you want to see
        everything the bebop is storing)

        :return: nothing but it will eventually fill the sensors with all of the state variables as they arrive
        """
        command_tuple = self.command_parser.get_command_tuple(
            "common", "Common", "AllStates")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def takeoff(self):
        """
        Sends the takeoff command to the mambo.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "TakeOff")
        self.drone_connection.send_noparam_command_packet_ack(command_tuple)

    def safe_takeoff(self, timeout):
        """
        Sends commands to takeoff until the Bebop reports it is taking off

        :param timeout: quit trying to takeoff if it takes more than timeout seconds
        """

        start_time = time.time()
        # take off until it really listens
        while (self.sensors.flying_state != "takingoff"
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            success = self.takeoff()
            self.smart_sleep(1)

        # now wait until it finishes takeoff before returning
        while ((self.sensors.flying_state not in ("flying", "hovering")
                and (time.time() - start_time < timeout))):
            if (self.sensors.flying_state == "emergency"):
                return
            self.smart_sleep(1)

    def land(self):
        """
        Sends the land command to the bebop.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "Landing")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def emergency_land(self):
        """
        Sends the land command to the bebop on the high priority/emergency channel.
        Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "Landing")
        return self.drone_connection.send_noparam_high_priority_command_packet(
            command_tuple)

    def is_landed(self):
        """
        Returns true if it is landed or emergency and False otherwise
        :return:
        """
        if (self.sensors.flying_state in ("landed", "emergency")):
            return True
        else:
            return False

    def safe_land(self, timeout):
        """
        Ensure the Bebop lands by sending the command until it shows landed on sensors
        """
        start_time = time.time()

        while (self.sensors.flying_state not in ("landing", "landed")
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            color_print("trying to land", "INFO")
            success = self.land()
            self.smart_sleep(1)

        while (self.sensors.flying_state != "landed"
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            self.smart_sleep(1)

    def smart_sleep(self, timeout):
        """
        Don't call time.sleep directly as it will mess up BLE and miss WIFI packets!  Use this
        which handles packets received while sleeping

        :param timeout: number of seconds to sleep
        """
        self.drone_connection.smart_sleep(timeout)

    def _ensure_fly_command_in_range(self, value):
        """
        Ensure the fly direct commands are in range

        :param value: the value sent by the user
        :return: a value in the range -100 to 100
        """
        if (value < -100):
            return -100
        elif (value > 100):
            return 100
        else:
            return value

    def fly_direct(self, roll, pitch, yaw, vertical_movement, duration):
        """
        Direct fly commands using PCMD.  Each argument ranges from -100 to 100.  Numbers outside that are clipped
        to that range.

        Note that the xml refers to gaz, which is apparently french for vertical movements:
        http://forum.developer.parrot.com/t/terminology-of-gaz/3146

        :param roll:
        :param pitch:
        :param yaw:
        :param vertical_movement:
        :return:
        """

        my_roll = self._ensure_fly_command_in_range(roll)
        my_pitch = self._ensure_fly_command_in_range(pitch)
        my_yaw = self._ensure_fly_command_in_range(yaw)
        my_vertical = self._ensure_fly_command_in_range(vertical_movement)

        print("roll is %d pitch is %d yaw is %d vertical is %d" %
              (my_roll, my_pitch, my_yaw, my_vertical))
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "PCMD")

        self.drone_connection.send_pcmd_command(command_tuple, my_roll,
                                                my_pitch, my_yaw, my_vertical,
                                                duration)

    def flip(self, direction):
        """
        Sends the flip command to the bebop.  Gets the codes for it from the xml files. Ensures the
        packet was received or sends it again up to a maximum number of times.
        Valid directions to flip are: front, back, right, left

        :return: True if the command was sent and False otherwise
        """
        fixed_direction = direction.lower()
        if (fixed_direction not in ("front", "back", "right", "left")):
            print(
                "Error: %s is not a valid direction.  Must be one of %s" %
                direction, "front, back, right, or left")
            print("Ignoring command and returning")
            return

        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "ardrone3", "Animations", "Flip", fixed_direction)
        # print command_tuple
        # print enum_tuple

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple)

    def start_video_stream(self):
        """
        Sends the start stream command to the bebop. The bebop will start streaming
        RTP packets on the port defined in wifiConnection.py (55004 by default).
        The packets can be picked up by opening an approriate SDP file in a media
        player such as VLC, MPlayer, FFMPEG or OpenCV.

        :return: nothing
        """

        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "MediaStreaming", "VideoEnable")
        param_tuple = [1]  # Enable
        param_type_tuple = ['u8']
        self.drone_connection.send_param_command_packet(
            command_tuple, param_tuple, param_type_tuple)

    def stop_video_stream(self):
        """
        Sends the stop stream command to the bebop. The bebop will stop streaming
        RTP packets.

        :return: nothing
        """

        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "MediaStreaming", "VideoEnable")
        param_tuple = [0]  # Disable
        param_type_tuple = ['u8']
        self.drone_connection.send_param_command_packet(
            command_tuple, param_tuple, param_type_tuple)

    def set_video_stream_mode(self, mode='low_latency'):
        """
        Set the video mode for the RTP stream.
        :param: mode: one of 'low_latency', 'high_reliability' or 'high_reliability_low_framerate'
  
        :return: True if the command was sent and False otherwise
        """

        # handle case issues
        fixed_mode = mode.lower()

        if (fixed_mode not in ("low_latency", "high_reliability",
                               "high_reliability_low_framerate")):
            print(
                "Error: %s is not a valid stream mode.  Must be one of %s" %
                (mode,
                 "low_latency, high_reliability or high_reliability_low_framerate"
                 ))
            print("Ignoring command and returning")
            return False

        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "ardrone3", "MediaStreaming", "VideoStreamMode", mode)

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple)

    def pan_tilt_camera(self, tilt_degrees, pan_degrees):
        """
        Send the command to pan/tilt the camera by the specified number of degrees in pan/tilt

        Note, this only seems to work in small increments.  Use pan_tilt_velocity to get the camera to look
        straight downward

        :param tilt_degrees: tilt degrees
        :param pan_degrees: pan degrees
        :return:
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Camera", "OrientationV2")

        self.drone_connection.send_param_command_packet(
            command_tuple,
            param_tuple=[tilt_degrees, pan_degrees],
            param_type_tuple=['float', 'float'],
            ack=False)

    def pan_tilt_camera_velocity(self,
                                 tilt_velocity,
                                 pan_velocity,
                                 duration=0):
        """
        Send the command to tilt the camera by the specified number of degrees per second in pan/tilt.
        This function has two modes.  First, if duration is 0, the initial velocity is sent and
        then the function returns (meaning the camera will keep moving).  If it is greater than 0,
        the command executes for that amount of time and then sends a stop command to the camera
        and then returns.

        :param tilt_degrees: tile change in degrees per second
        :param pan_degrees: pan change in degrees per second
        :param duration: seconds to run the command for
        :return:
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Camera", "Velocity")

        self.drone_connection.send_param_command_packet(
            command_tuple,
            param_tuple=[tilt_velocity, pan_velocity],
            param_type_tuple=['float', 'float'],
            ack=False)

        if (duration > 0):
            # wait for the specified duration
            start_time = time.time()
            while (time.time() - start_time < duration):
                self.drone_connection.smart_sleep(0.1)

            # send the stop command
            self.drone_connection.send_param_command_packet(
                command_tuple,
                param_tuple=[0, 0],
                param_type_tuple=['float', 'float'],
                ack=False)
Ejemplo n.º 4
0
class Mambo:
    def __init__(self, address, use_wifi=False):
        """
        Initialize with its BLE address - if you don't know the address, call findMambo
        and that will discover it for you.

        You can also connect to the wifi on the FPV camera.  Do not use this if the camera is not connected.  Also,
        ensure you have connected your machine to the wifi on the camera before attempting this or it will not work.

        :param address: unique address for this mambo
        :param use_wifi: set to True to connect with wifi as well as the BLE
        """
        self.address = address
        self.use_wifi = use_wifi
        if (use_wifi):
            self.drone_connection = WifiConnection(self, drone_type="Mambo")
        else:
            if (BLEAvailable):
                self.drone_connection = BLEConnection(address, self)
            else:
                self.drone_connection = None
                color_print(
                    "ERROR: you are trying to use a BLE connection on a system that doesn't have BLE installed.",
                    "ERROR")
                return

        # intialize the command parser
        self.command_parser = DroneCommandParser()

        # initialize the sensors and the parser
        self.sensors = MamboSensors()
        self.sensor_parser = DroneSensorParser(drone_type="Mambo")

    def set_user_sensor_callback(self, function, args):
        """
        Set the (optional) user callback function for sensors.  Every time a sensor
        is updated, it calls this function.

        :param function: name of the function
        :param args: tuple of arguments to the function
        :return: nothing
        """
        self.sensors.set_user_callback_function(function, args)

    def update_sensors(self, data_type, buffer_id, sequence_number, raw_data,
                       ack):
        """
        Update the sensors (called via the wifi or ble connection)

        :param data: raw data packet that needs to be parsed
        :param ack: True if this packet needs to be ack'd and False otherwise
        """

        sensor_list = self.sensor_parser.extract_sensor_values(raw_data)
        if (sensor_list is not None):
            for sensor in sensor_list:
                (sensor_name, sensor_value, sensor_enum, header_tuple) = sensor
                if (sensor_name is not None):
                    self.sensors.update(sensor_name, sensor_value, sensor_enum)
                    # print(self.sensors)
                else:
                    color_print(
                        "data type %d buffer id %d sequence number %d" %
                        (data_type, buffer_id, sequence_number), "WARN")
                    color_print(
                        "This sensor is missing (likely because we don't need it)",
                        "WARN")

        if (ack):
            self.drone_connection.ack_packet(buffer_id, sequence_number)

    def connect(self, num_retries):
        """
        Connects to the drone and re-tries in case of failure the specified number of times.  Seamlessly
        connects to either wifi or BLE depending on how you initialized it

        :param: num_retries is the number of times to retry

        :return: True if it succeeds and False otherwise
        """

        # special case for when the user tries to do BLE when it isn't available
        if (self.drone_connection is None):
            return False

        connected = self.drone_connection.connect(num_retries)
        return connected

    def disconnect(self):
        """
        Disconnect the BLE connection.  Always call this at the end of your programs to
        cleanly disconnect.

        :return: void
        """
        self.drone_connection.disconnect()

    def takeoff(self):
        """
        Sends the takeoff command to the mambo.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Piloting", "TakeOff")
        self.drone_connection.send_noparam_command_packet_ack(command_tuple)

    def safe_takeoff(self, timeout):
        """
        Sends commands to takeoff until the mambo reports it is taking off

        :param timeout: quit trying to takeoff if it takes more than timeout seconds
        """

        start_time = time.time()
        # take off until it really listens
        while (self.sensors.flying_state != "takingoff"
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            success = self.takeoff()
            self.smart_sleep(1)

        # now wait until it finishes takeoff before returning
        while ((self.sensors.flying_state not in ("flying", "hovering")
                and (time.time() - start_time < timeout))):
            if (self.sensors.flying_state == "emergency"):
                return
            self.smart_sleep(1)

    def land(self):
        """
        Sends the land command to the mambo.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Piloting", "Landing")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def safe_land(self, timeout):
        """
        Ensure the mambo lands by sending the command until it shows landed on sensors
        """
        start_time = time.time()

        while (self.sensors.flying_state not in ("landing", "landed")
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            color_print("trying to land", "INFO")
            success = self.land()
            self.smart_sleep(1)

        while (self.sensors.flying_state != "landed"
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            self.smart_sleep(1)

    def smart_sleep(self, timeout):
        """
        Don't call time.sleep directly as it will mess up BLE and miss WIFI packets!  Use this
        which handles packets received while sleeping

        :param timeout: number of seconds to sleep
        """
        self.drone_connection.smart_sleep(timeout)

    def hover(self):
        """
        Sends the command execute a flat trim to the mambo.  This is basically a hover command.
        Gets the codes for it from the xml files. Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Piloting", "FlatTrim")
        # print command_tuple
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def flip(self, direction):
        """
        Sends the flip command to the mambo.  Gets the codes for it from the xml files. Ensures the
        packet was received or sends it again up to a maximum number of times.
        Valid directions to flip are: front, back, right, left

        :return: True if the command was sent and False otherwise
        """
        fixed_direction = direction.lower()
        if (fixed_direction not in ("front", "back", "right", "left")):
            print(
                "Error: %s is not a valid direction.  Must be one of %s" %
                direction, "front, back, right, or left")
            print("Ignoring command and returning")
            return

        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "minidrone", "Animations", "Flip", fixed_direction)
        # print command_tuple
        # print enum_tuple

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple)

    def turn_degrees(self, degrees):
        """
        Turn the mambo the specified number of degrees (-180, 180)

        This is called cap in the xml but it means degrees per
        http://forum.developer.parrot.com/t/what-does-cap-stand-for/6213/2

        :param degrees: degrees to turn (-180 to 180)
        :return: True if the command was sent and False otherwise
        """
        if (degrees > 180):
            degrees = 180
            print("Degrees too large: setting to 180")
        elif (degrees < -180):
            degrees = -180
            print("Degrees too large and negative: setting to -180")

        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Animations", "Cap")
        return self.drone_connection.send_turn_command(command_tuple, degrees)

    def turn_on_auto_takeoff(self):
        """
        Turn on the auto take off (throw mode)
        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Piloting", "AutoTakeOffMode")

        return self.drone_connection.send_param_command_packet(
            command_tuple, param_tuple=[1], param_type_tuple=["u8"])

    def take_picture(self):
        """
        Ask the drone to take a picture

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "MediaRecord", "PictureV2")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def ask_for_state_update(self):
        """
        Ask for a full state update (likely this should never be used but it can be called if you want to see
        everything the mambo is storing)

        :return: nothing but it will eventually fill the MamboSensors with all of the state variables as they arrive
        """
        command_tuple = self.command_parser.get_command_tuple(
            "common", "Common", "AllStates")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def _ensure_fly_command_in_range(self, value):
        """
        Ensure the fly direct commands are in range and also ensures the values are integers (just rounds them)

        :param value: the value sent by the user
        :return: a value in the range -100 to 100
        """
        if (value < -100):
            return -100
        elif (value > 100):
            return 100
        else:
            return int(value)

    def fly_direct(self, roll, pitch, yaw, vertical_movement, duration):
        """
        Direct fly commands using PCMD.  Each argument ranges from -100 to 100.  Numbers outside that are clipped
        to that range.

        Note that the xml refers to gaz, which is apparently french for vertical movements:
        http://forum.developer.parrot.com/t/terminology-of-gaz/3146

        :param roll:
        :param pitch:
        :param yaw:
        :param vertical_movement:
        :return:
        """

        my_roll = self._ensure_fly_command_in_range(roll)
        my_pitch = self._ensure_fly_command_in_range(pitch)
        my_yaw = self._ensure_fly_command_in_range(yaw)
        my_vertical = self._ensure_fly_command_in_range(vertical_movement)

        #print("roll is %d pitch is %d yaw is %d vertical is %d" % (my_roll, my_pitch, my_yaw, my_vertical))
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Piloting", "PCMD")

        self.drone_connection.send_pcmd_command(command_tuple, my_roll,
                                                my_pitch, my_yaw, my_vertical,
                                                duration)

    def open_claw(self):
        """
        Open the claw - note not supposed under wifi since the camera takes the place of the claw

        :return: True if the command was sent and False otherwise (can include errors or asking to do this using wifi)
        """
        # not supposed under wifi since the camera takes the place of the claw
        if (self.use_wifi):
            return False

        # print "open claw"
        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "minidrone", "UsbAccessory", "ClawControl", "OPEN")
        # print command_tuple
        # print enum_tuple

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple, self.sensors.claw_id)

    def close_claw(self):
        """
        Close the claw - note not supposed under wifi since the camera takes the place of the claw

        :return: True if the command was sent and False otherwise (can include errors or asking to do this using wifi)
        """

        # not supposed under wifi since the camera takes the place of the claw
        if (self.use_wifi):
            return False

        # print "close claw"
        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "minidrone", "UsbAccessory", "ClawControl", "CLOSE")
        # print command_tuple
        # print enum_tuple

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple, self.sensors.claw_id)

    def fire_gun(self):
        """
        Fire the gun (assumes it is attached) - note not supposed under wifi since the camera takes the place of the gun

        :return: True if the command was sent and False otherwise (can include errors or asking to do this using wifi)
        """

        # not supposed under wifi since the camera takes the place of the gun
        if (self.use_wifi):
            return False

        # print "firing gun"
        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "minidrone", "UsbAccessory", "GunControl", "FIRE")
        # print command_tuple
        # print enum_tuple

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple, self.sensors.gun_id)

    def set_max_vertical_speed(self, value):
        """
        Sets the maximum vertical speed in m/s.  Unknown what the true maximum is but
        we do ensure you only set positive values.

        :param value: maximum speed
        :return: True if the command was sent and False otherwise
        """

        if (value < 0):
            print(
                "Can't set a negative max vertical speed.  Setting to 1 m/s instead."
            )
            value = 1

        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "SpeedSettings", "MaxVerticalSpeed")
        param_tuple = [value]
        param_type_tuple = ['float']
        return self.drone_connection.send_param_command_packet(
            command_tuple, param_tuple, param_type_tuple)

    def set_max_tilt(self, value):
        """
        Sets the maximum tilt in degrees.  Ensures you only set positive values.

        :param value: maximum tilt in degrees
        :return: True if the command was sent and False otherwise
        """

        if (value < 0):
            print(
                "Can't set a negative max horizontal speed.  Setting to 1 m/s instead."
            )
            value = 1

        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "PilotingSettings", "MaxTilt")
        param_tuple = [value]
        param_type_tuple = ['float']
        return self.drone_connection.send_param_command_packet(
            command_tuple, param_tuple, param_type_tuple)

    def emergency(self):
        """
        Sends the emergency command to the mambo.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "minidrone", "Piloting", "Emergency")
        self.drone_connection.send_noparam_command_packet_ack(command_tuple)

    def safe_emergency(self, timeout):
        """
        Sends emergency stop command  until the Mambo reports it is not flying anymore

        :param timeout: quit trying to emergency stop if it takes more than timeout seconds
        """

        start_time = time.time()
        # send emergency until it really listens
        while ((self.sensors.flying_state in ("flying", "hovering"))
               and (time.time() - start_time < timeout)):
            success = self.emergency()
            self.smart_sleep(1)

        # now wait until it touches ground before returning
        while ((self.sensors.flying_state != "landed")
               and (time.time() - start_time < timeout)):
            self.smart_sleep(1)
Ejemplo n.º 5
0
class Bebop:
    def __init__(self):
        """
        Create a new Bebop object.  Assumes you have connected to the Bebop's wifi

        """
        self.drone_connection = WifiConnection(self, drone_type="Bebop")

        # intialize the command parser
        self.command_parser = DroneCommandParser()

        # initialize the sensors and the parser
        self.sensors = BebopSensors()
        self.sensor_parser = DroneSensorParser(drone_type="Bebop")

    def update_sensors(self, data_type, buffer_id, sequence_number, raw_data,
                       ack):
        """
        Update the sensors (called via the wifi or ble connection)

        :param data: raw data packet that needs to be parsed
        :param ack: True if this packet needs to be ack'd and False otherwise
        """
        sensor_list = self.sensor_parser.extract_sensor_values(raw_data)
        if (sensor_list is not None):
            for sensor in sensor_list:
                (sensor_name, sensor_value, sensor_enum, header_tuple) = sensor
                if (sensor_name is not None):
                    self.sensors.update(sensor_name, sensor_value, sensor_enum)
                    #print(self.sensors)
                else:
                    color_print(
                        "data type %d buffer id %d sequence number %d" %
                        (data_type, buffer_id, sequence_number), "WARN")
                    color_print(
                        "This sensor is missing (likely because we don't need it)",
                        "WARN")

        if (ack):
            self.drone_connection.ack_packet(buffer_id, sequence_number)

    def connect(self, num_retries):
        """
        Connects to the drone and re-tries in case of failure the specified number of times.  Seamlessly
        connects to either wifi or BLE depending on how you initialized it

        :param: num_retries is the number of times to retry

        :return: True if it succeeds and False otherwise
        """

        # special case for when the user tries to do BLE when it isn't available
        if (self.drone_connection is None):
            return False

        connected = self.drone_connection.connect(num_retries)
        return connected

    def disconnect(self):
        """
        Disconnect the BLE connection.  Always call this at the end of your programs to
        cleanly disconnect.

        :return: void
        """
        self.drone_connection.disconnect()

    def ask_for_state_update(self):
        """
        Ask for a full state update (likely this should never be used but it can be called if you want to see
        everything the bebop is storing)

        :return: nothing but it will eventually fill the sensors with all of the state variables as they arrive
        """
        command_tuple = self.command_parser.get_command_tuple(
            "common", "Common", "AllStates")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def takeoff(self):
        """
        Sends the takeoff command to the mambo.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "TakeOff")
        self.drone_connection.send_noparam_command_packet_ack(command_tuple)

    def safe_takeoff(self, timeout):
        """
        Sends commands to takeoff until the Bebop reports it is taking off

        :param timeout: quit trying to takeoff if it takes more than timeout seconds
        """

        start_time = time.time()
        # take off until it really listens
        while (self.sensors.flying_state != "takingoff"
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            success = self.takeoff()
            self.smart_sleep(1)

        # now wait until it finishes takeoff before returning
        while ((self.sensors.flying_state not in ("flying", "hovering")
                and (time.time() - start_time < timeout))):
            if (self.sensors.flying_state == "emergency"):
                return
            self.smart_sleep(1)

    def land(self):
        """
        Sends the land command to the mambo.  Gets the codes for it from the xml files.  Ensures the
        packet was received or sends it again up to a maximum number of times.

        :return: True if the command was sent and False otherwise
        """
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "Landing")
        return self.drone_connection.send_noparam_command_packet_ack(
            command_tuple)

    def safe_land(self, timeout):
        """
        Ensure the Bebop lands by sending the command until it shows landed on sensors
        """
        start_time = time.time()

        while (self.sensors.flying_state not in ("landing", "landed")
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            color_print("trying to land", "INFO")
            success = self.land()
            self.smart_sleep(1)

        while (self.sensors.flying_state != "landed"
               and (time.time() - start_time < timeout)):
            if (self.sensors.flying_state == "emergency"):
                return
            self.smart_sleep(1)

    def smart_sleep(self, timeout):
        """
        Don't call time.sleep directly as it will mess up BLE and miss WIFI packets!  Use this
        which handles packets received while sleeping

        :param timeout: number of seconds to sleep
        """
        self.drone_connection.smart_sleep(timeout)

    def _ensure_fly_command_in_range(self, value):
        """
        Ensure the fly direct commands are in range

        :param value: the value sent by the user
        :return: a value in the range -100 to 100
        """
        if (value < -100):
            return -100
        elif (value > 100):
            return 100
        else:
            return value

    def fly_direct(self, roll, pitch, yaw, vertical_movement, duration):
        """
        Direct fly commands using PCMD.  Each argument ranges from -100 to 100.  Numbers outside that are clipped
        to that range.

        Note that the xml refers to gaz, which is apparently french for vertical movements:
        http://forum.developer.parrot.com/t/terminology-of-gaz/3146

        :param roll:
        :param pitch:
        :param yaw:
        :param vertical_movement:
        :return:
        """

        my_roll = self._ensure_fly_command_in_range(roll)
        my_pitch = self._ensure_fly_command_in_range(pitch)
        my_yaw = self._ensure_fly_command_in_range(yaw)
        my_vertical = self._ensure_fly_command_in_range(vertical_movement)

        print("roll is %d pitch is %d yaw is %d vertical is %d" %
              (my_roll, my_pitch, my_yaw, my_vertical))
        command_tuple = self.command_parser.get_command_tuple(
            "ardrone3", "Piloting", "PCMD")

        self.drone_connection.send_pcmd_command(command_tuple, my_roll,
                                                my_pitch, my_yaw, my_vertical,
                                                duration)

    def flip(self, direction):
        """
        Sends the flip command to the bebop.  Gets the codes for it from the xml files. Ensures the
        packet was received or sends it again up to a maximum number of times.
        Valid directions to flip are: front, back, right, left

        :return: True if the command was sent and False otherwise
        """
        fixed_direction = direction.lower()
        if (fixed_direction not in ("front", "back", "right", "left")):
            print(
                "Error: %s is not a valid direction.  Must be one of %s" %
                direction, "front, back, right, or left")
            print("Ignoring command and returning")
            return

        (command_tuple,
         enum_tuple) = self.command_parser.get_command_tuple_with_enum(
             "ardrone3", "Animations", "Flip", fixed_direction)
        # print command_tuple
        # print enum_tuple

        return self.drone_connection.send_enum_command_packet_ack(
            command_tuple, enum_tuple)