def on_apply(self, sender, event):
try:
for page in self.TabControl.Pages:
if hasattr(page, 'apply'):
page.apply()
get_scene().update()
except Exception as e:
print(e)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
proxy = get_proxy()
if not proxy:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
options = ["Finer", "Coarser"]
while True:
option = compas_rhino.rs.GetString("Select mode", strings=options)
if not option:
break
if option == "Finer":
raise NotImplementedError
elif option == "Coarser":
raise NotImplementedError
else:
raise NotImplementedError
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
RV2settings_cmd.RunCommand(True)
def RunCommand(is_interactive):
system = get_system()
if not system:
return
scene = get_scene()
if not scene:
return
filepath = select_filepath_open(system['session.dirname'],
system['session.extension'])
if not filepath:
return
dirname, basename = os.path.split(filepath)
filename, extension = os.path.splitext(basename)
system['session.dirname'] = dirname
system['session.filename'] = filename
with open(filepath, "r") as f:
session = json.load(f, cls=DataDecoder)
load_session(session)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("thrust")[0]
if not pattern:
print("There is no ThrustDiagram in the scene.")
return
options = [
"DiagramAttributes", "VerticesAttributes", "FacesAttributes",
"MoveSupports"
]
option = compas_rhino.rs.GetString("Modify thrust diagram:",
strings=options)
if not option:
return
if option == "DiagramAttributes":
RV2thrust_attributes_cmd.RunCommand(True)
elif option == "VerticesAttributes":
RV2thrust_modify_vertices_cmd.RunCommand(True)
elif option == "FacesAttributes":
RV2thrust_modify_faces_cmd.RunCommand(True)
elif option == "MoveSupports":
RV2thrust_move_supports_cmd.RunCommand(True)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("form")[0]
if not pattern:
print("There is no FormDiagram in the scene.")
return
options = ["DiagramAttributes", "VerticesAttributes", "EdgesAttributes", "MoveVertices", "Relax"]
option = compas_rhino.rs.GetString("Modify form diagram:", strings=options)
if not option:
return
if option == "DiagramAttributes":
RV2form_attributes_cmd.RunCommand(True)
elif option == "VerticesAttributes":
RV2form_modify_vertices_cmd.RunCommand(True)
elif option == "EdgesAttributes":
RV2form_modify_edges_cmd.RunCommand(True)
elif option == "MoveVertices":
RV2form_move_vertices_cmd.RunCommand(True)
elif option == "Relax":
RV2form_relax_cmd.RunCommand(True)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
options = ["All", "Continuous", "Parallel", "Manual"]
option = compas_rhino.rs.GetString("Selection Type", strings=options)
if not option:
return
if option == "All":
keys = keys = list(pattern.datastructure.edges())
elif option == "Continuous":
temp = pattern.select_edges()
keys = list(set(flatten([pattern.datastructure.edge_loop(key) for key in temp])))
elif option == "Parallel":
temp = pattern.select_edges()
keys = list(set(flatten([pattern.datastructure.edge_strip(key) for key in temp])))
elif option == "Manual":
keys = pattern.select_edges()
if keys:
public = [name for name in pattern.datastructure.default_edge_attributes.keys() if not name.startswith('_')]
if pattern.update_edges_attributes(keys, names=public):
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
options = ["ByContinuousEdges", "Manual"]
option = compas_rhino.rs.GetString("Selection Type.", strings=options)
if not option:
return
if option == "ByContinuousEdges":
temp = pattern.select_edges()
keys = list(
set(
flatten([
pattern.datastructure.vertices_on_edge_loop(key)
for key in temp
])))
elif option == "Manual":
keys = pattern.select_vertices()
if keys:
if pattern.move_vertices(keys):
scene.update()
def RunCommand(is_interactive):
system = get_system()
if not system:
return
scene = get_scene()
if not scene:
return
dirname = system['session.dirname']
filename = system['session.filename']
extension = system['session.extension']
if not filename:
filepath = select_filepath_save(dirname, extension)
if not filepath:
return
dirname, basename = os.path.split(filepath)
filename, _ = os.path.splitext(basename)
filepath = os.path.join(dirname, filename + '.' + extension)
# this should be templated somewhere
# perhaps there should be a Session class/object/singleton
session = save_session()
with open(filepath, 'w+') as f:
json.dump(session, f, cls=DataEncoder)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
force = scene.get("force")[0]
if not force:
print("There is no ForceDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
options = ["ByContinuousEdges", "Manual"]
option = compas_rhino.rs.GetString("Selection Type.", strings=options)
if not option:
return
if option == "ByContinuousEdges":
temp = force.select_edges()
keys = list(set(flatten([force.datastructure.vertices_on_edge_loop(key) for key in temp])))
elif option == "Manual":
keys = force.select_vertices()
if keys:
if force.move_vertices(keys):
if force.datastructure.primal:
force.datastructure.update_angle_deviations()
if thrust:
thrust.settings['_is.valid'] = False
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
options = [
"FromLines", "FromMesh", "FromSurface", "FromSkeleton",
"FromTriangulation", "FromFeatures"
]
option = compas_rhino.rs.GetString("Create Pattern:", strings=options)
if not option:
return
if option == "FromLines":
RV2pattern_from_lines_cmd.RunCommand(True)
elif option == "FromMesh":
RV2pattern_from_mesh_cmd.RunCommand(True)
elif option == "FromSurface":
RV2pattern_from_surface_cmd.RunCommand(True)
elif option == "FromSkeleton":
RV2pattern_from_skeleton_cmd.RunCommand(True)
elif option == "FromTriangulation":
RV2pattern_from_triangulation_cmd.RunCommand(True)
elif option == "FromFeatures":
RV2pattern_from_features_cmd.RunCommand(True)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
# get untrimmed surface(s) -------------------------------------------------
guid = compas_rhino.select_surface(
message='select an untrimmed surface or a polysurface')
if not guid:
return
compas_rhino.rs.HideObjects(guid)
# make subd object ---------------------------------------------------------
subdobject = SubdObject.from_guid(guid)
if not subdobject:
return
compas_rhino.rs.HideObjects(guid)
subdobject.draw_coarse()
subdobject.get_draw_default_subd()
subdobject.draw_subd()
# interactively modify subdivision ----------------------------------------
while True:
menu = CommandMenu(config)
action = menu.select_action()
if not action or action is None:
subdobject.clear()
print("Pattern from surface(s) aborted!")
compas_rhino.rs.ShowObjects(guid)
return
if action['name'] == 'Finish':
break
action['action'](subdobject)
# make pattern -------------------------------------------------------------
mesh = subdobject.subd
xyz = mesh.vertices_attributes('xyz')
faces = [mesh.face_vertices(fkey) for fkey in mesh.faces()]
pattern = Pattern.from_vertices_and_faces(xyz, faces)
# clear skeleton
layer = subdobject.settings['layer']
subdobject.clear()
compas_rhino.delete_layers([layer])
scene.clear()
scene.add(pattern, name='pattern')
scene.update()
print(
"Pattern object successfully created. Input surface(s) have been hidden."
)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
SettingsForm.from_scene(scene, object_types=["PatternObject", "FormObject", "ForceObject", "ThrustObject"], global_settings=["RV2", "Solvers"])
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
force = scene.get("force")[0]
if not force:
print("There is no ForceDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
options = ["All", "ByContinuousEdges", "Manual"]
option = compas_rhino.rs.GetString("Selection Type.", strings=options)
if not option:
return
if option == "All":
keys = list(force.datastructure.vertices())
elif option == "ByContinuousEdges":
temp = force.select_edges()
keys = list(
set(
flatten([
force.datastructure.vertices_on_edge_loop(key)
for key in temp
])))
elif option == "Manual":
keys = force.select_vertices()
if keys:
# current = scene.settings['RV2']['show.angles']
# scene.settings['RV2']['show.angles'] = False
# scene.update()
# ModifyAttributesForm.from_sceneNode(force, 'vertices', keys)
# scene.settings['RV2']['show.angles'] = current
# if thrust:
# thrust.settings['_is.valid'] = False
# scene.update()
public = [
name
for name in force.datastructure.default_vertex_attributes.keys()
if not name.startswith('_')
]
if force.update_vertices_attributes(keys, names=public):
if thrust:
thrust.settings['_is.valid'] = False
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
rhinoform = scene.get("form")[0]
if not rhinoform:
return
AttributesForm.from_diagram(rhinoform)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
force = scene.get("force")[0]
if not force:
print("There is no ForceDiagram in the scene.")
return
AttributesForm.from_sceneNode(force)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
AttributesForm.from_sceneNode(pattern)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
thrust = scene.get("thrust")[0]
if not thrust:
print("There is no ThrustDiagram in the scene.")
return
AttributesForm.from_sceneNode(thrust)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
form = scene.get("form")[0]
if not form:
print("There is no FormDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
# show the form vertices
form_vertices = "{}::vertices".format(form.settings['layer'])
compas_rhino.rs.ShowGroup(form_vertices)
if thrust:
# hide the thrust vertices
thrust_vertices_free = "{}::vertices_free".format(thrust.settings['layer'])
thrust_vertices_anchor = "{}::vertices_anchor".format(thrust.settings['layer'])
compas_rhino.rs.HideGroup(thrust_vertices_free)
compas_rhino.rs.HideGroup(thrust_vertices_anchor)
compas_rhino.rs.Redraw()
# selection options
options = ["ByContinuousEdges", "Manual"]
option = compas_rhino.rs.GetString("Selection Type.", strings=options)
if not option:
scene.update()
return
if option == "ByContinuousEdges":
temp = form.select_edges()
keys = list(set(flatten([form.datastructure.vertices_on_edge_loop(key) for key in temp])))
elif option == "Manual":
keys = form.select_vertices()
if keys:
if form.move_vertices(keys):
if form.datastructure.dual:
form.datastructure.dual.update_angle_deviations()
if thrust:
thrust.settings['_is.valid'] = False
# the scene needs to be updated
# even if the vertices where not modified
# to reset group visibility to the configuration of settings
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
if not list(pattern.datastructure.vertices_where({'is_anchor': True})):
print(
"Pattern has no anchor vertices! Please define anchor (support) vertices."
)
return
form = FormDiagram.from_pattern(pattern.datastructure)
form.vertices_attribute('is_fixed', False)
normals = [
form.face_normal(face)
for face in form.faces_where({'_is_loaded': True})
]
scale = 1 / len(normals)
normal = scale_vector(sum_vectors(normals), scale)
if normal[2] < 0:
form.flip_cycles()
fixed = list(pattern.datastructure.vertices_where({'is_fixed': True}))
if fixed:
for key in fixed:
if form.has_vertex(key):
form.vertex_attribute(key, 'is_anchor', True)
thrust = form.copy(cls=ThrustDiagram)
bbox_form = form.bounding_box_xy()
diagonal = length_vector(subtract_vectors(bbox_form[2], bbox_form[0]))
zmax = 0.25 * diagonal
scene.settings['Solvers']['tna.vertical.zmax'] = round(zmax, 1)
scene.clear()
scene.add(form, name='form')
scene.add(thrust, name='thrust')
scene.update()
print('FormDiagram object successfully created.')
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
options = ["Yes", "No"]
option = compas_rhino.rs.GetString("Clear all RV2 objects?",
strings=options,
defaultString="No")
if not option:
return
if option == "Yes":
scene.clear()
def RunCommand(is_interactive):
system = get_system()
if not system:
return
scene = get_scene()
if not scene:
return
dirname = system['session.dirname']
filename = system['session.filename']
extension = system['session.extension']
filepath = select_filepath_save(dirname, extension)
if not filepath:
return
dirname, basename = os.path.split(filepath)
filename, _ = os.path.splitext(basename)
filepath = os.path.join(dirname, filename + '.' + extension)
# this should be templated somewhere
# perhaps there should be a Session class/object/singleton
session = {
"data": {
"pattern": None,
"form": None,
"force": None
},
"settings": scene.settings,
}
pattern = scene.get('pattern')[0]
if pattern:
session['data']['pattern'] = pattern.datastructure.to_data()
form = scene.get('form')[0]
if form:
session['data']['form'] = form.datastructure.to_data()
force = scene.get('force')[0]
if force:
session['data']['force'] = force.datastructure.to_data()
with open(filepath, 'w+') as f:
json.dump(session, f, cls=DataEncoder)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
# select vertices and faces
# delete selected vertices and faces
# update scene
raise NotImplementedError
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
rhinoform = scene.get("form")[0]
if not rhinoform:
return
menu = CommandMenu(config)
action = menu.select_action()
if not action:
return
action["action"](rhinoform)
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
force = scene.get("force")[0]
if not force:
print("There is no ForceDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
options = ["All", "Continuous", "Parallel", "Manual"]
option = compas_rhino.rs.GetString("Selection Type.", strings=options)
if not option:
return
if option == "All":
keys = list(force.datastructure.edges())
elif option == "Continuous":
edges = force.select_edges()
keys = list(
set(
flatten(
[force.datastructure.edge_loop(edge) for edge in edges])))
elif option == "Parallel":
temp = force.select_edges()
keys = list(
set(flatten([force.datastructure.edge_strip(key)
for key in temp])))
elif option == "Manual":
keys = force.select_edges()
if keys:
public = [
name
for name in force.datastructure.default_edge_attributes.keys()
if not name.startswith("_")
]
if force.update_edges_attributes(keys, names=public):
if thrust:
thrust.settings['_is.valid'] = False
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
pattern = scene.get("pattern")[0]
if not pattern:
print("There is no Pattern in the scene.")
return
options = ["AllBoundaryVertices", "Corners", "ByContinuousEdges", "Manual"]
while True:
option = compas_rhino.rs.GetString("Selection mode:", strings=options)
if not option:
return
if option == "AllBoundaryVertices":
keys = pattern.datastructure.vertices_on_boundary()
elif option == "Corners":
angle = compas_rhino.rs.GetInteger(
'Angle tolerance for non-quad face corners:', 170, 1, 180)
keys = pattern.datastructure.corner_vertices(tol=angle)
elif option == "ByContinuousEdges":
temp = pattern.select_edges()
keys = list(
set(
flatten([
pattern.datastructure.vertices_on_edge_loop(key)
for key in temp
])))
elif option == "Manual":
keys = pattern.select_vertices()
if keys:
public = [
name for name in
pattern.datastructure.default_vertex_attributes.keys()
if not name.startswith('_')
]
if pattern.update_vertices_attributes(keys, names=public):
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
# both form and thrust need to be available
form = scene.get("form")[0]
if not form:
print("There is no FormDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
if not thrust:
print("There is no ThrustDiagram in the scene.")
return
# hide the form vertices
form_vertices = "{}::vertices".format(form.settings['layer'])
compas_rhino.rs.HideGroup(form_vertices)
# show the thrust vertices
thrust_vertices_free = "{}::vertices_free".format(thrust.settings['layer'])
thrust_vertices_anchor = "{}::vertices_anchor".format(
thrust.settings['layer'])
compas_rhino.rs.HideGroup(thrust_vertices_free)
compas_rhino.rs.ShowGroup(thrust_vertices_anchor)
compas_rhino.rs.Redraw()
# select anchored vertices
keys = thrust.select_vertices_anchor()
if keys:
if thrust.move_vertices_vertical(keys):
for key in keys:
# update the corresponding form diagram vertices
z = thrust.datastructure.vertex_attribute(key, 'z')
form.datastructure.vertex_attribute(key, 'z', z)
thrust.settings['_is.valid'] = False
# the scene needs to be updated
# in any case
# to reset object visualisation
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
proxy = get_proxy()
if not proxy:
return
form = scene.get("form")[0]
if not form:
print("There is no FormDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
anchors = list(form.datastructure.vertices_where({'is_anchor': True}))
fixed = list(form.datastructure.vertices_where({'is_fixed': True}))
fixed = anchors + fixed
options = ['True', 'False']
option = compas_rhino.rs.GetString(
"Press Enter to smooth or ESC to exit. Keep all boundaries fixed?",
options[0], options)
if option is None:
print('Form smoothing aborted!')
return
if option == 'True':
fixed += list(flatten(form.datastructure.vertices_on_boundaries()))
fixed += list(
flatten([
form.datastructure.face_vertices(face) for face in
form.datastructure.faces_where({'_is_loaded': False})
]))
fixed = list(set(fixed))
form.datastructure.smooth_area(fixed=fixed)
if thrust:
thrust.settings['_is.valid'] = False
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
form = scene.get("form")[0]
if not form:
print("There is no FormDiagram in the scene.")
return
thrust = scene.get("thrust")[0]
if not thrust:
print("There is no ThrustDiagram in the scene.")
return
# hide the form vertices
form_vertices = "{}::vertices".format(form.settings['layer'])
compas_rhino.rs.HideGroup(form_vertices)
# selection options
options = ["Manual"]
option = compas_rhino.rs.GetString("Selection Type.", strings=options)
if not option:
scene.update()
return
if option == "Manual":
keys = thrust.select_faces()
thrust_name = thrust.name
if keys:
public = [
name for name in form.datastructure.default_face_attributes.keys()
if not name.startswith('_')
]
if form.update_faces_attributes(keys, names=public):
thrust.datastructure.data = form.datastructure.data
thrust.name = thrust_name
thrust.settings['_is.valid'] = False
scene.update()
def RunCommand(is_interactive):
scene = get_scene()
if not scene:
return
guids = compas_rhino.select_point()
if not guids:
return
pt = compas_rhino.get_point_coordinates([guids])[0]
skeleton = Skeleton.from_center_point(pt)
if not skeleton:
return
compas_rhino.delete_objects([guids])
rhinoskeleton = scene.add(skeleton, 'skeleton')
rhinoskeleton.dynamic_draw_self()
rhinoskeleton.draw_self()
