Ejemplo n.º 1
0
def InitClientMode():
    config.clientmode = ConfigSubsection()
    config.clientmode.enabled = ConfigYesNo(default=False)

    def clientModeChanged(configElement):
        SystemInfo["ClientModeEnabled"] = configElement.value == True
        SystemInfo["ClientModeDisabled"] = configElement.value != True

    config.clientmode.enabled.addNotifier(clientModeChanged,
                                          immediate_feedback=True,
                                          initial_call=True)
    config.clientmode.serverAddressType = ConfigSelection(default="ip",
                                                          choices=[
                                                              ("ip", _("IP")),
                                                              ("domain",
                                                               _("Domain"))
                                                          ])
    config.clientmode.serverIP = ConfigIP(default=[0, 0, 0, 0], auto_jump=True)
    config.clientmode.serverDomain = ConfigText(default="", fixed_size=False)
    config.clientmode.serverStreamingPort = ConfigInteger(default=8001,
                                                          limits=(1, 65535))
    config.clientmode.serverFTPusername = ConfigText(default="root",
                                                     fixed_size=False)
    config.clientmode.serverFTPpassword = ConfigText(default="",
                                                     fixed_size=False)
    config.clientmode.serverFTPPort = ConfigInteger(default=21,
                                                    limits=(1, 65535))
    config.clientmode.passive = ConfigYesNo(False)
    config.clientmode.enableSchedule = ConfigYesNo(False)
    config.clientmode.scheduleRepeatInterval = ConfigSelection(
        default="360",
        choices=[("60", _("Every hour")), ("120", _("Every 2 hours")),
                 ("180", _("Every 3 hours")), ("360", _("Every 6 hours")),
                 ("720", _("Every 12 hours")), ("daily", _("Daily"))])
    config.clientmode.scheduletime = ConfigClock(default=0)  # 1:00
    # to reinstate normal mode settings
    config.clientmode.nim_cache = ConfigText(default="", fixed_size=False)
    config.clientmode.remote_fallback_enabled_cache = ConfigYesNo(
        default=False)
    config.clientmode.remote_fallback_cache = ConfigText(default="",
                                                         fixed_size=False)
    config.clientmode.timer_sanity_check_enabled_cache = ConfigYesNo(
        default=True)
Ejemplo n.º 2
0
def InitUsageConfig():
	config.misc.useNTPminutes = ConfigSelection(default = "30", choices = [("30", "30" + " " +_("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))])
	config.usage = ConfigSubsection()
	config.usage.showdish = ConfigYesNo(default = True)
	config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))])
	config.usage.multibouquet = ConfigYesNo(default = True)

	config.usage.alternative_number_mode = ConfigYesNo(default = False)
	def alternativeNumberModeChange(configElement):
		eDVBDB.getInstance().setNumberingMode(configElement.value)
		refreshServiceList()
	config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)

	config.usage.hide_number_markers = ConfigYesNo(default = True)
	config.usage.hide_number_markers.addNotifier(refreshServiceList)

	config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.crypto_icon_mode.addNotifier(refreshServiceList)

	config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])  
	config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
	config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
	config.usage.record_indicator_mode.addNotifier(refreshServiceList)

	choicelist = [("-1", _("Disable"))]
	for i in range(0,1300,100):
		choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i))
	config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
	config.usage.servicelist_column.addNotifier(refreshServiceList)

	config.usage.service_icon_enable = ConfigYesNo(default = False)
	config.usage.service_icon_enable.addNotifier(refreshServiceList)

	config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [
		("standard", _("Standard")),
		("keep", _("Keep service")),
		("reverseB", _("Reverse bouquet buttons")),
		("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])

	config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)

	config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
	config.usage.e1like_radio_mode = ConfigYesNo(default = True)

	config.usage.volume_step_slow = ConfigSelectionNumber(default = 1, stepwidth = 1, min = 1, max = 10, wraparound = False)
	config.usage.volume_step_fast = ConfigSelectionNumber(default = 3, stepwidth = 1, min = 1, max = 10, wraparound = False)

	choicelist = [("0", _("No timeout"))]
	for i in range(1, 12):
		choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
	config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
	config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
	config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
	config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
	config.usage.show_second_infobar = ConfigSelection(default = "11", choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))])
	config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
	config.usage.oldstyle_zap_controls = ConfigSelection(default = "standard", choices = [
		("standard", _("Standard")),
		("neutrino", _("Neutrino")),
		("openspa", _("OpenSPA")) ])
	config.usage.oldstyle_channel_select_controls =  ConfigYesNo(default = False)
	config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
	config.usage.ok_is_channelselection = ConfigYesNo(default = False)
	config.usage.channelselection_preview = ConfigYesNo(default = False)
	config.usage.show_spinner = ConfigYesNo(default = True)
	config.usage.enable_tt_caching = ConfigYesNo(default = True)
	config.usage.sort_settings = ConfigYesNo(default = False)
	config.usage.sort_menus = ConfigYesNo(default = False)
	choicelist = []
	for i in (10, 30):
		choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300, 600, 1200, 1800):
		m = i / 60
		choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
	for i in (3600, 7200, 14400):
		h = i / 3600
		choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h))
	config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
	config.usage.hdd_standby_in_standby = ConfigSelection(default = "-1", choices = [("-1", _("Same as in active")), ("0", _("No standby"))] + choicelist)
	config.usage.hdd_timer = ConfigYesNo(default = False)
	config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
		("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])

	config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
		("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
		("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])

	config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
		("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
	choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
	for i in [60, 300, 600, 900, 1800, 2700, 3600]:
		m = i/60
		choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
	config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)

	config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD))
	config.usage.timer_path = ConfigText(default = "<default>")
	config.usage.instantrec_path = ConfigText(default = "<default>")
	config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
	config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])

	config.oscaminfo = ConfigSubsection()
	config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
	config.oscaminfo.userdatafromconf = ConfigYesNo(default = False)
	config.oscaminfo.autoupdate = ConfigYesNo(default = False)
	config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12)
	config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False)
	config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True)
	config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) )
	config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True)

	config.cccaminfo = ConfigSubsection()
	config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
	config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True)
	config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
	config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
	config.cccaminfo.username = ConfigText(default="", fixed_size=False)
	config.cccaminfo.password = ConfigText(default="", fixed_size=False)
	config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
	config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
	config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
	config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True)
	config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
	config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
	config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
	config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
	config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)

	config.usage.movielist_trashcan = ConfigYesNo(default=True)
	config.usage.movielist_trashcan_days = ConfigNumber(default=8)
	config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
	config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
		("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")),
		("ask no", _("Ask user") + " " + _("default") + " " + _("no")),
		("resume", _("Resume from last position")),
		("beginning", _("Start from the beginning"))])
	config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
		("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
	config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
		("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
		("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))])
	config.usage.next_movie_msg = ConfigYesNo(default = True)
	config.usage.last_movie_played = ConfigText()
	config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
		("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ])

	config.usage.setup_level = ConfigSelection(default = "expert", choices = [
		("simple", _("Simple")),
		("intermediate", _("Intermediate")),
		("expert", _("Expert")) ])

	config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [
		("no", _("No")),
		("yes", _("Yes")),
		("except", _("No, except Wakeup timer")) ])

	config.usage.wakeup_menu = ConfigNothing()
	config.usage.wakeup_enabled = ConfigYesNo(default = False)
	config.usage.wakeup_day = ConfigSubDict()
	config.usage.wakeup_time = ConfigSubDict()
	for i in range(7):
		config.usage.wakeup_day[i] = ConfigEnableDisable(default = False)
		config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60))

	config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [
		("show_menu", _("Show shutdown menu")),
		("shutdown", _("Immediate shutdown")),
		("standby", _("Standby")),
		("restart", _("Reboot")) ] )

	config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [
		("show_menu", _("Show shutdown menu")),
		("shutdown", _("Immediate shutdown")),
		("standby", _("Standby")) ] )

	choicelist = [("0", _("Do nothing"))]
	for i in range(3600, 21601, 3600):
		h = abs(i / 3600)
		h = ngettext("%d hour", "%d hours", h) % h
		choicelist.append((str(i), _("Standby in ") + h))
	config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
	config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
	config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False)
	config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))

	choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
	for i in range(900, 7201, 900):
		m = abs(i / 60)
		m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append((str(i), _("Standby in ") + m))
	config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)

	choicelist = [("0", _("Disabled"))]
	for i in [60, 300, 600] + range(900, 7201, 900):
		m = abs(i / 60)
		m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append((str(i), _("after ") + m))
	config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
	config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = True)
	config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
	config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))

	choicelist = [("0", _("Disabled"))]
	for m in (1, 5, 10, 15, 30, 60):
		choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m))
	config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist)

	config.usage.check_timeshift = ConfigYesNo(default = True)

	choicelist = [("0", _("Disabled"))]
	for i in (2, 3, 4, 5, 10, 20, 30):
		choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300):
		m = i / 60
		choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
	config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)

	config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [
		("0", "DVB-S/-C/-T"),
		("1", "DVB-S/-T/-C"),
		("2", "DVB-C/-S/-T"),
		("3", "DVB-C/-T/-S"),
		("4", "DVB-T/-C/-S"),
		("5", "DVB-T/-S/-C"),
		("127", _("No priority")) ])

	config.usage.remote_fallback_enabled = ConfigYesNo(default = False)
	config.usage.remote_fallback = ConfigText(default = _("http://IP-ADDRESS:8001"), fixed_size = False)
	config.usage.show_timer_conflict_warning = ConfigYesNo(default = True)

	dvbs_nims = [("-2", _("Disabled"))]
	dvbt_nims = [("-2", _("Disabled"))]
	dvbc_nims = [("-2", _("Disabled"))]
	nims = [("-1", _("auto"))]
	for x in nimmanager.nim_slots:
		if x.isCompatible("DVB-S"):
			dvbs_nims.append((str(x.slot), x.getSlotName()))
		elif x.isCompatible("DVB-T"):
			dvbt_nims.append((str(x.slot), x.getSlotName()))
		elif x.isCompatible("DVB-C"):
			dvbc_nims.append((str(x.slot), x.getSlotName()))
		nims.append((str(x.slot), x.getSlotName()))
	config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
	nims.insert(0,("-2", _("Disabled")))
	config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
	config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims))
	dvbs_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims)
	config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims))
	dvbt_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims)
	config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims))
	dvbc_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims)
	SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and (len(dvbt_nims) > 2 or len(dvbc_nims) > 2)
	SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and (len(dvbs_nims) > 2 or len(dvbc_nims) > 2)
	SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and (len(dvbs_nims) > 2 or len(dvbt_nims) > 2)
 
	config.misc.disable_background_scan = ConfigYesNo(default = False)

	config.usage.servicenum_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
	config.usage.servicename_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
	config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
	config.usage.serviceitems_per_page = ConfigSelectionNumber(default = 14, stepwidth = 1, min = 8, max = 20, wraparound = True)

	config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [
		('barleft', _("Progress bar left")),
		('barright', _("Progress bar right")),
		('percleft', _("Percentage left")),
		('percright', _("Percentage right")),
		('no', _("No")) ])
	config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
	config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
	config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)

	config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)

	config.usage.blinking_rec_symbol_during_recording = ConfigYesNo(default = False)

	config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)

	config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
	config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
		('o', _("Off")),
		('p', _("Progress")),
		('s', _("Small progress")),
		('i', _("Icons")),
	])
	config.usage.movielist_unseen = ConfigYesNo(default = False)

	config.usage.swap_snr_on_osd = ConfigYesNo(default = False)

	config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
	config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False)
	config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
	config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False)
	config.usage.lcd_scroll_delay = ConfigSelection(default = "10000", choices = [
		("10000", "10 " + _("seconds")),
		("20000", "20 " + _("seconds")),
		("30000", "30 " + _("seconds")),
		("60000", "1 " + _("minute")),
		("300000", "5 " + _("minutes")),
		("noscrolling", _("off"))])
	config.usage.lcd_scroll_speed = ConfigSelection(default = "300", choices = [
		("500", _("slow")),
		("300", _("normal")),
		("100", _("fast"))])

	config.usage.maxchannelnumlen = ConfigSelection(default = "5", choices = [("4", _("4")), ("5", _("5"))])
	config.usage.numzaptimeoutmode = ConfigSelection(default = "standard", choices = [("standard", _("Standard")), ("userdefined", _("User defined")), ("off", _("off"))])
	config.usage.numzaptimeout1 = ConfigSlider(default = 3000, increment = 250, limits = (750, 5000))
	config.usage.numzaptimeout2 = ConfigSlider(default = 1000, increment = 250, limits = (750, 5000))

	def SpinnerOnOffChanged(configElement):
		setSpinnerOnOff(int(configElement.value))
	config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)

	def EnableTtCachingChanged(configElement):
		setEnableTtCachingOnOff(int(configElement.value))
	config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)

	def TunerTypePriorityOrderChanged(configElement):
		setTunerTypePriorityOrder(int(configElement.value))
	config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)

	def PreferredTunerChanged(configElement):
		setPreferredTuner(int(configElement.value))
	config.usage.frontend_priority.addNotifier(PreferredTunerChanged)

	config.usage.hide_zap_errors = ConfigYesNo(default = False)
	config.usage.hide_ci_messages = ConfigYesNo(default = True)
	config.usage.show_cryptoinfo = ConfigYesNo(default = True)
	config.usage.show_eit_nownext = ConfigYesNo(default = True)
	config.usage.show_vcr_scart = ConfigYesNo(default = False)
	config.usage.show_update_disclaimer = ConfigYesNo(default = True)
	config.usage.pic_resolution = ConfigSelection(default = None, choices = [(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")])

	if SystemInfo["Fan"]:
		choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))]
		if os.path.exists("/proc/stb/fp/fan_choices"):
			choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")]
		config.usage.fan = ConfigSelection(choicelist)
		def fanChanged(configElement):
			open(SystemInfo["Fan"], "w").write(configElement.value)
		config.usage.fan.addNotifier(fanChanged)

	if SystemInfo["FanPWM"]:
		def fanSpeedChanged(configElement):
			open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:])
		config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255))
		config.usage.fanspeed.addNotifier(fanSpeedChanged)

	if SystemInfo["StandbyLED"]:
		def standbyLEDChanged(configElement):
			open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
		config.usage.standbyLED = ConfigYesNo(default = True)
		config.usage.standbyLED.addNotifier(standbyLEDChanged)

	config.epg = ConfigSubsection()
	config.epg.eit = ConfigYesNo(default = True)
	config.epg.mhw = ConfigYesNo(default = True)
	config.epg.freesat = ConfigYesNo(default = True)
	config.epg.viasat = ConfigYesNo(default = True)
	config.epg.netmed = ConfigYesNo(default = True)
	config.epg.virgin = ConfigYesNo(default = False)
	config.misc.showradiopic = ConfigYesNo(default = True)
	def EpgSettingsChanged(configElement):
		from enigma import eEPGCache
		mask = 0xffffffff
		if not config.epg.eit.value:
			mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
		if not config.epg.mhw.value:
			mask &= ~eEPGCache.MHW
		if not config.epg.freesat.value:
			mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
		if not config.epg.viasat.value:
			mask &= ~eEPGCache.VIASAT
		if not config.epg.netmed.value:
			mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
		if not config.epg.virgin.value:
			mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
		eEPGCache.getInstance().setEpgSources(mask)
	config.epg.eit.addNotifier(EpgSettingsChanged)
	config.epg.mhw.addNotifier(EpgSettingsChanged)
	config.epg.freesat.addNotifier(EpgSettingsChanged)
	config.epg.viasat.addNotifier(EpgSettingsChanged)
	config.epg.netmed.addNotifier(EpgSettingsChanged)
	config.epg.virgin.addNotifier(EpgSettingsChanged)

	config.epg.maxdays = ConfigSelectionNumber(min = 1, max = 28, stepwidth = 1, default = 5, wraparound = True)
	def EpgmaxdaysChanged(configElement):
		from enigma import eEPGCache
		eEPGCache.getInstance().setEpgmaxdays(config.epg.maxdays.getValue())
	config.epg.maxdays.addNotifier(EpgmaxdaysChanged)

	config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
	def EpgHistorySecondsChanged(configElement):
		from enigma import eEPGCache
		eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
	config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)

	def setHDDStandby(configElement):
		for hdd in harddiskmanager.HDDList():
			hdd[1].setIdleTime(int(configElement.value))
	config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)

	if SystemInfo["12V_Output"]:
		def set12VOutput(configElement):
			Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
		config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)

	config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))
	config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml"))

	config.network = ConfigSubsection()
	if SystemInfo["WakeOnLAN"]:
		def wakeOnLANChanged(configElement):
			if getBoxType() in ('et7000', 'et7500', 'gbx1', 'gbx3', 'et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbultraue', 'gbultrase', 'gbipbox', 'quadbox2400', 'mutant2400', 'et7x00', 'et8500', 'et8500s'):
				open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
			else:
				open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")	
		config.network.wol = ConfigYesNo(default = False)
		config.network.wol.addNotifier(wakeOnLANChanged)

	config.network.Inadyn_autostart = ConfigYesNo(default = False)
	config.network.OpenVPN_autostart = ConfigYesNo(default = False)

	config.seek = ConfigSubsection()
	config.seek.selfdefined_13 = ConfigNumber(default=15)
	config.seek.selfdefined_46 = ConfigNumber(default=60)
	config.seek.selfdefined_79 = ConfigNumber(default=300)

	config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])

	config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
	config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])

	config.seek.on_pause = ConfigSelection(default = "play", choices = [
		("play", _("Play")),
		("step", _("Single step (GOP)")),
		("last", _("Last speed")) ])


	config.crash = ConfigSubsection()
	config.crash.details = ConfigYesNo(default = False)

	debugpath = [('/home/root/logs/', '/home/root/')]
	for p in harddiskmanager.getMountedPartitions():
		if os.path.exists(p.mountpoint):
			d = os.path.normpath(p.mountpoint)
			if p.mountpoint != '/':
				debugpath.append((p.mountpoint + 'logs/', d))
	config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath)
	if not os.path.exists("/home"):
		os.mkdir("/home",0755)
	if not os.path.exists("/home/root"):
		os.mkdir("/home/root",0755)

	def updatedebug_path(configElement):
		if not os.path.exists(config.crash.debug_path.value):
			try:
				os.mkdir(config.crash.debug_path.value,0755)
			except:
				print "Failed to create log path: %s" % config.crash.debug_path.value
	config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False)

	crashlogheader = "We are really sorry. Your receiver encountered " \
					 "a software problem, and needs to be restarted.\n" \
					 "Please send the logfile %senigma2_crash_xxxxxx.log to http://openspa.info.\n" \
					 "Your receiver restarts in 10 seconds!\n" \
					 "Component: enigma2" % config.crash.debug_path.value
	config.crash.debug_text = ConfigText(default=_(crashlogheader), fixed_size=False)

	config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])

	def updateEnterForward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_forward, configElement.value)

	config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)

	def updateEnterBackward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_backward, configElement.value)

	config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)

	def updateEraseSpeed(el):
		eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
	def updateEraseFlags(el):
		eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
	config.misc.erase_speed = ConfigSelection(default="20", choices = [
		("10", "10 MB/s"),
		("20", "20 MB/s"),
		("50", "50 MB/s"),
		("100", "100 MB/s")])
	config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
	config.misc.erase_flags = ConfigSelection(default="1", choices = [
		("0", _("Disable")),
		("1", _("Internal hdd only")),
		("3", _("Everywhere"))])
	config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)

	if SystemInfo["ZapMode"]:
		def setZapmode(el):
			open(SystemInfo["ZapMode"], "w").write(el.value)
		config.misc.zapmode = ConfigSelection(default = "mute", choices = [
			("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
		config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)

	config.subtitles = ConfigSubsection()
	config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
		("0", _("original")),
		("1", _("white")),
		("2", _("yellow")) ])
	config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
	config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
	config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
	config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
	config.subtitles.colourise_dialogs = ConfigYesNo(default = False)
	config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
	config.subtitles.subtitle_fontsize  = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40")
	config.subtitles.showbackground = ConfigYesNo(default = False)

	subtitle_delay_choicelist = []
	for i in range(-900000, 1845000, 45000):
		if i == 0:
			subtitle_delay_choicelist.append(("0", _("No delay")))
		else:
			subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.)))
	config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)

	config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
	config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
	config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = True)
	config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
	config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
		("0", _("No transparency")),
		("25", "10%"),
		("50", "20%"),
		("75", "30%"),
		("100", "40%"),
		("125", "50%"),
		("150", "60%"),
		("175", "70%"),
		("200", "80%"),
		("225", "90%"),
		("255", _("Full transparency"))])
	config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [
		("0", _("alternative")),
		("1", _("white")),
		("2", _("yellow")) ])
	config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True)
	config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
	config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
		("1", _("Original")),
		("23976", _("23.976")),
		("24000", _("24")),
		("25000", _("25")),
		("29970", _("29.97")),
		("30000", _("30"))])
	config.subtitles.pango_autoturnon = ConfigYesNo(default = True)

	config.autolanguage = ConfigSubsection()
	audio_language_choices=[
		("---", _("None")),
		("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
		("ara", _("Arabic")),
		("eus baq", _("Basque")),
		("bul", _("Bulgarian")),
		("hrv", _("Croatian")),
		("ces cze", _("Czech")),
		("dan", _("Danish")),
		("dut ndl", _("Dutch")),
		("eng qaa", _("English")),
		("est", _("Estonian")),
		("fin", _("Finnish")),
		("fra fre", _("French")),
		("deu ger", _("German")),
		("ell gre", _("Greek")),
		("heb", _("Hebrew")),
		("hun", _("Hungarian")),
		("ita", _("Italian")),
		("lav", _("Latvian")),
		("lit", _("Lithuanian")),
		("ltz", _("Luxembourgish")),
		("nor", _("Norwegian")),
		("pol", _("Polish")),
		("por", _("Portuguese")),
		("fas per", _("Persian")),
		("ron rum", _("Romanian")),
		("rus", _("Russian")),
		("srp", _("Serbian")),
		("slk slo", _("Slovak")),
		("slv", _("Slovenian")),
		("spa", _("Spanish")),
		("swe", _("Swedish")),
		("tha", _("Thai")),
		("tur Audio_TUR", _("Turkish"))]

	def setEpgLanguage(configElement):
		eServiceEvent.setEPGLanguage(configElement.value)
	config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
	config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)

	def setEpgLanguageAlternative(configElement):
		eServiceEvent.setEPGLanguageAlternative(configElement.value)
	config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
	config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)

	config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False)
	config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
	config.autolanguage.audio_usecache = ConfigYesNo(default = True)

	subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
	config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
	config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
	config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
	config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)
	config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [
		("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"),
		("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"),
		("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"),
		("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))])

	config.streaming = ConfigSubsection()
	config.streaming.stream_ecm = ConfigYesNo(default = False)
	config.streaming.descramble = ConfigYesNo(default = True)
	config.streaming.descramble_client = ConfigYesNo(default = False)
	config.streaming.stream_eit = ConfigYesNo(default = True)
	config.streaming.stream_ait = ConfigYesNo(default = True)
	config.streaming.authentication = ConfigYesNo(default = False)

	#config.osd = ConfigSubsection()
	config.osd.dst_left = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 720, wraparound = False)
	config.osd.dst_width = ConfigSelectionNumber(default = 720, stepwidth = 1, min = 0, max = 720, wraparound = False)
	config.osd.dst_top = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 576, wraparound = False)
	config.osd.dst_height = ConfigSelectionNumber(default = 576, stepwidth = 1, min = 0, max = 576, wraparound = False)
	config.osd.alpha = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
	config.osd.alpha_teletext = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
	config.osd.alpha_webbrowser = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
	config.av.osd_alpha = NoSave(ConfigNumber(default = 255))
	config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")),("topandbottom", _("Top and Bottom"))], "auto")
	config.osd.threeDznorm = ConfigSlider(default = 50, increment = 1, limits = (0, 100))
	config.osd.show3dextensions = ConfigYesNo(default = False)
	choiceoptions = [("mode1", _("Mode 1")), ("mode2", _("Mode 2"))]
	config.osd.threeDsetmode = ConfigSelection(default = 'mode1' , choices = choiceoptions )
Ejemplo n.º 3
0
def InitUsageConfig():
    config.usage = ConfigSubsection()
    config.usage.subnetwork = ConfigYesNo(default=True)
    config.usage.subnetwork_cable = ConfigYesNo(default=True)
    config.usage.subnetwork_terrestrial = ConfigYesNo(default=True)
    config.usage.showdish = ConfigYesNo(default=True)
    config.misc.showrotorposition = ConfigSelection(
        default='no',
        choices=[('no', _('no')), ('yes', _('yes')),
                 ('withtext', _('with text')),
                 ('tunername', _('with tuner name'))])
    config.usage.multibouquet = ConfigYesNo(default=True)
    config.usage.alternative_number_mode = ConfigYesNo(default=True)

    def alternativeNumberModeChange(configElement):
        eDVBDB.getInstance().setNumberingMode(configElement.value)
        refreshServiceList()

    config.usage.alternative_number_mode.addNotifier(
        alternativeNumberModeChange)
    config.usage.hide_number_markers = ConfigYesNo(default=True)
    config.usage.hide_number_markers.addNotifier(refreshServiceList)
    config.usage.servicetype_icon_mode = ConfigSelection(
        default='0',
        choices=[('0', _('None')), ('1', _('Left from servicename')),
                 ('2', _('Right from servicename'))])
    config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
    config.usage.crypto_icon_mode = ConfigSelection(
        default='0',
        choices=[('0', _('None')), ('1', _('Left from servicename')),
                 ('2', _('Right from servicename'))])
    config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
    config.usage.record_indicator_mode = ConfigSelection(
        default='0',
        choices=[('0', _('None')), ('1', _('Left from servicename')),
                 ('2', _('Right from servicename')), ('3', _('Red colored'))])
    config.usage.record_indicator_mode.addNotifier(refreshServiceList)
    choicelist = [('-1', _('Disable'))]
    for i in range(0, 1300, 100):
        choicelist.append(
            (str(i), ngettext('%d pixel wide', '%d pixels wide', i) % i))

    config.usage.servicelist_column = ConfigSelection(default='-1',
                                                      choices=choicelist)
    config.usage.servicelist_column.addNotifier(refreshServiceList)
    config.usage.service_icon_enable = ConfigYesNo(default=False)
    config.usage.service_icon_enable.addNotifier(refreshServiceList)
    config.usage.servicelist_cursor_behavior = ConfigSelection(
        default='standard',
        choices=[('standard', _('Standard')), ('keep', _('Keep service')),
                 ('reverseB', _('Reverse bouquet buttons')),
                 ('keep reverseB',
                  _('Keep service') + ' + ' + _('Reverse bouquet buttons'))])
    choicelist = [('by skin', _('As defined by the skin'))]
    for i in range(5, 41):
        choicelist.append(str(i))

    config.usage.servicelist_number_of_services = ConfigSelection(
        default='by skin', choices=choicelist)
    config.usage.servicelist_number_of_services.addNotifier(refreshServiceList)
    config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False)
    config.usage.quickzap_bouquet_change = ConfigYesNo(default=False)
    config.usage.e1like_radio_mode = ConfigYesNo(default=True)
    choicelist = [('0', _('No timeout'))]
    for i in range(1, 20):
        choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))

    config.usage.infobar_timeout = ConfigSelection(default='5',
                                                   choices=choicelist)
    config.usage.show_infobar_do_dimming = ConfigYesNo(default=True)
    config.usage.show_infobar_dimming_speed = ConfigSelectionNumber(
        min=1, max=40, stepwidth=1, default=40, wraparound=True)
    config.usage.show_infobar_on_zap = ConfigYesNo(default=True)
    config.usage.show_infobar_on_skip = ConfigYesNo(default=True)
    config.usage.show_infobar_on_event_change = ConfigYesNo(default=False)
    config.usage.show_second_infobar = ConfigSelection(
        default=5,
        choices=[("", _('None'))] + choicelist + [('EPG', _('EPG'))])
    config.usage.show_simple_second_infobar = ConfigYesNo(default=True)
    config.usage.infobar_frontend_source = ConfigSelection(
        default='settings',
        choices=[('settings', _('Settings')), ('tuner', _('Tuner'))])
    config.usage.oldstyle_zap_controls = ConfigYesNo(default=False)
    config.usage.oldstyle_channel_select_controls = ConfigYesNo(default=False)
    config.usage.zap_with_ch_buttons = ConfigYesNo(default=False)
    config.usage.ok_is_channelselection = ConfigYesNo(default=False)
    config.usage.volume_instead_of_channelselection = ConfigYesNo(
        default=False)
    config.usage.channelselection_preview = ConfigYesNo(default=False)
    config.usage.show_spinner = ConfigYesNo(default=True)
    config.usage.menu_sort_weight = ConfigDictionarySet(
        default={'mainmenu': {
            'submenu': {}
        }})
    config.usage.menu_sort_mode = ConfigSelection(
        default='default',
        choices=[('a_z', _('alphabetical')), ('default', _('Default')),
                 ('user', _('user defined'))])
    config.usage.menu_show_numbers = ConfigYesNo(default=False)
    config.usage.menu_path = ConfigSelection(default='off',
                                             choices=[('off', _('Disabled')),
                                                      ('small', _('Small')),
                                                      ('large', _('Large'))])
    config.usage.enable_tt_caching = ConfigYesNo(default=True)
    choicelist = []
    for i in (10, 30):
        choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))

    for i in (60, 120, 300, 600, 1200, 1800):
        m = i / 60
        choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))

    for i in (3600, 7200, 14400):
        h = i / 3600
        choicelist.append((str(i), ngettext('%d hour', '%d hours', h) % h))

    config.usage.hdd_standby = ConfigSelection(
        default='300', choices=[('0', _('No standby'))] + choicelist)
    config.usage.output_12V = ConfigSelection(default='do not change',
                                              choices=[('do not change',
                                                        _('Do not change')),
                                                       ('off', _('Off')),
                                                       ('on', _('On'))])
    config.usage.pip_zero_button = ConfigSelection(
        default='standard',
        choices=[('standard', _('Standard')),
                 ('swap', _('Swap PiP and main picture')),
                 ('swapstop', _('Move PiP to main picture')),
                 ('stop', _('Stop PiP'))])
    config.usage.pip_hideOnExit = ConfigSelection(default='without popup',
                                                  choices=[('no', _('No')),
                                                           ('popup',
                                                            _('With popup')),
                                                           ('without popup',
                                                            _('Without popup'))
                                                           ])
    choicelist = [('-1', _('Disabled')), ('0', _('No timeout'))]
    for i in [60, 300, 600, 900, 1800, 2700, 3600]:
        m = i / 60
        choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))

    config.usage.pip_last_service_timeout = ConfigSelection(default='0',
                                                            choices=choicelist)
    config.usage.default_path = ConfigText(default='')
    config.usage.timer_path = ConfigText(default='<default>')
    config.usage.instantrec_path = ConfigText(default='<default>')
    config.usage.timeshift_path = ConfigText(default='/media/hdd/')
    config.usage.allowed_timeshift_paths = ConfigLocations(
        default=['/media/hdd/'])
    config.ncaminfo = ConfigSubsection()
    config.ncaminfo.showInExtensions = ConfigYesNo(default=False)
    config.ncaminfo.userdatafromconf = ConfigYesNo(default=False)
    config.ncaminfo.autoupdate = ConfigYesNo(default=False)
    config.ncaminfo.username = ConfigText(default='username',
                                          fixed_size=False,
                                          visible_width=12)
    config.ncaminfo.password = ConfigPassword(default='password',
                                              fixed_size=False)
    config.ncaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True)
    config.ncaminfo.port = ConfigInteger(default=8181, limits=(0, 65536))
    config.ncaminfo.intervall = ConfigSelectionNumber(min=1,
                                                      max=600,
                                                      stepwidth=1,
                                                      default=10,
                                                      wraparound=True)
    config.oscaminfo = ConfigSubsection()
    config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
    config.oscaminfo.userdatafromconf = ConfigYesNo(default=False)
    config.oscaminfo.autoupdate = ConfigYesNo(default=False)
    config.oscaminfo.username = ConfigText(default='username',
                                           fixed_size=False,
                                           visible_width=12)
    config.oscaminfo.password = ConfigPassword(default='password',
                                               fixed_size=False)
    config.oscaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True)
    config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536))
    config.oscaminfo.intervall = ConfigSelectionNumber(min=1,
                                                       max=600,
                                                       stepwidth=1,
                                                       default=10,
                                                       wraparound=True)
    SystemInfo['OScamInstalled'] = False
    config.cccaminfo = ConfigSubsection()
    config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
    config.cccaminfo.serverNameLength = ConfigSelectionNumber(min=10,
                                                              max=100,
                                                              stepwidth=1,
                                                              default=22,
                                                              wraparound=True)
    config.cccaminfo.name = ConfigText(default='Profile', fixed_size=False)
    config.cccaminfo.ip = ConfigText(default='192.168.2.12', fixed_size=False)
    config.cccaminfo.username = ConfigText(default='', fixed_size=False)
    config.cccaminfo.password = ConfigText(default='', fixed_size=False)
    config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
    config.cccaminfo.profile = ConfigText(default='', fixed_size=False)
    config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
    config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min=1,
                                                         max=10,
                                                         stepwidth=1,
                                                         default=5,
                                                         wraparound=True)
    config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
    config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
    config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
    config.cccaminfo.blacklist = ConfigText(
        default='/media/cf/CCcamInfo.blacklisted', fixed_size=False)
    config.cccaminfo.profiles = ConfigText(
        default='/media/cf/CCcamInfo.profiles', fixed_size=False)
    config.usage.movielist_trashcan = ConfigYesNo(default=True)
    config.usage.movielist_trashcan_days = ConfigNumber(default=8)
    config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
    config.usage.on_movie_start = ConfigSelection(
        default='resume',
        choices=[
            ('ask yes', _('Ask user') + ' ' + _('default') + ' ' + _('yes')),
            ('ask no', _('Ask user') + ' ' + _('default') + ' ' + _('no')),
            ('resume', _('Resume from last position')),
            ('beginning', _('Start from the beginning'))
        ])
    config.usage.on_movie_stop = ConfigSelection(
        default='movielist',
        choices=[('ask', _('Ask user')),
                 ('movielist', _('Return to movie list')),
                 ('quit', _('Return to previous service'))])
    config.usage.on_movie_eof = ConfigSelection(
        default='movielist',
        choices=[('ask', _('Ask user')),
                 ('movielist', _('Return to movie list')),
                 ('quit', _('Return to previous service')),
                 ('pause', _('Pause movie at end')),
                 ('playlist', _('Play next (return to movie list)')),
                 ('playlistquit', _('Play next (return to previous service)')),
                 ('loop', _('Continues play (loop)')),
                 ('repeatcurrent', _('Repeat'))])
    config.usage.next_movie_msg = ConfigYesNo(default=True)
    config.usage.last_movie_played = ConfigText()
    config.usage.leave_movieplayer_onExit = ConfigSelection(
        default='popup',
        choices=[('no', _('No')), ('popup', _('With popup')),
                 ('without popup', _('Without popup')),
                 ('movielist', _('Return to movie list'))])
    config.usage.setup_level = ConfigSelection(default='expert',
                                               choices=[
                                                   ('simple', _('Normal')),
                                                   ('intermediate',
                                                    _('Advanced')),
                                                   ('expert', _('Expert'))
                                               ])
    config.usage.startup_to_standby = ConfigSelection(
        default='no',
        choices=[('no', _('No')), ('yes', _('Yes')),
                 ('except', _('No, except Wakeup timer'))])
    config.usage.wakeup_menu = ConfigNothing()
    config.usage.wakeup_enabled = ConfigYesNo(default=False)
    config.usage.wakeup_day = ConfigSubDict()
    config.usage.wakeup_time = ConfigSubDict()
    for i in range(7):
        config.usage.wakeup_day[i] = ConfigEnableDisable(default=False)
        config.usage.wakeup_time[i] = ConfigClock(default=21600)

    choicelist = [('0', _('Do nothing'))]
    for i in range(3600, 21601, 3600):
        h = abs(i / 3600)
        h = ngettext('%d hour', '%d hours', h) % h
        choicelist.append((str(i), _('Standby in ') + h))

    config.usage.inactivity_timer = ConfigSelection(default='0',
                                                    choices=choicelist)
    config.usage.inactivity_timer_blocktime = ConfigYesNo(default=True)
    config.usage.inactivity_timer_blocktime_begin = ConfigClock(
        default=time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
    config.usage.inactivity_timer_blocktime_end = ConfigClock(
        default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
    config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default=False)
    config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(
        default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
    config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(
        default=time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
    choicelist = [('0', _('Disabled')),
                  ('event_standby', _('Standby after current event'))]
    for i in range(900, 7201, 900):
        m = abs(i / 60)
        m = ngettext('%d minute', '%d minutes', m) % m
        choicelist.append((str(i), _('Standby in ') + m))

    config.usage.sleep_timer = ConfigSelection(default='0', choices=choicelist)
    choicelist = [('0', _('Disabled'))]
    for i in [300, 300, 600] + range(900, 7201, 900):
        m = abs(i / 60)
        m = ngettext('%d minute', '%d minutes', m) % m
        choicelist.append((str(i), _('after ') + m))

    config.usage.standby_to_shutdown_timer = ConfigSelection(
        default='0', choices=choicelist)
    config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(
        default=True)
    config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(
        default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
    config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(
        default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
    choicelist = [('0', _('Disabled'))]
    for m in (1, 5, 10, 15, 30, 60):
        choicelist.append(
            (str(m * 60), ngettext('%d minute', '%d minutes', m) % m))

    config.usage.screen_saver = ConfigSelection(default='300',
                                                choices=choicelist)
    config.usage.check_timeshift = ConfigYesNo(default=True)
    choicelist = [('0', _('Disabled'))]
    for i in (2, 3, 4, 5, 10, 20, 30):
        choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))

    for i in (60, 120, 300):
        m = i / 60
        choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))

    config.usage.timeshift_start_delay = ConfigSelection(default='0',
                                                         choices=choicelist)
    config.usage.alternatives_priority = ConfigSelection(
        default='0',
        choices=[('0', 'DVB-S/-C/-T'), ('1', 'DVB-S/-T/-C'),
                 ('2', 'DVB-C/-S/-T'), ('3', 'DVB-C/-T/-S'),
                 ('4', 'DVB-T/-C/-S'), ('5', 'DVB-T/-S/-C'),
                 ('127', _('No priority'))])
    config.usage.remote_fallback_enabled = ConfigYesNo(default=False)
    config.usage.remote_fallback = ConfigText(default='', fixed_size=False)
    config.usage.show_timer_conflict_warning = ConfigYesNo(default=True)
    dvbs_nims = [('-2', _('Disabled'))]
    dvbt_nims = [('-2', _('Disabled'))]
    dvbc_nims = [('-2', _('Disabled'))]
    atsc_nims = [('-2', _('Disabled'))]
    nims = [('-1', _('auto'))]
    for x in nimmanager.nim_slots:
        if x.isCompatible('DVB-S'):
            dvbs_nims.append((str(x.slot), x.getSlotName()))
        elif x.isCompatible('DVB-T'):
            dvbt_nims.append((str(x.slot), x.getSlotName()))
        elif x.isCompatible('DVB-C'):
            dvbc_nims.append((str(x.slot), x.getSlotName()))
        elif x.isCompatible('ATSC'):
            atsc_nims.append((str(x.slot), x.getSlotName()))
        nims.append((str(x.slot), x.getSlotName()))

    config.usage.frontend_priority = ConfigSelection(default='-1',
                                                     choices=list(nims))
    nims.insert(0, ('-2', _('Disabled')))
    config.usage.recording_frontend_priority = ConfigSelection(default='-2',
                                                               choices=nims)
    config.usage.frontend_priority_dvbs = ConfigSelection(
        default='-2', choices=list(dvbs_nims))
    dvbs_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_dvbs = ConfigSelection(
        default='-2', choices=dvbs_nims)
    config.usage.frontend_priority_dvbt = ConfigSelection(
        default='-2', choices=list(dvbt_nims))
    dvbt_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_dvbt = ConfigSelection(
        default='-2', choices=dvbt_nims)
    config.usage.frontend_priority_dvbc = ConfigSelection(
        default='-2', choices=list(dvbc_nims))
    dvbc_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_dvbc = ConfigSelection(
        default='-2', choices=dvbc_nims)
    config.usage.frontend_priority_atsc = ConfigSelection(
        default="-2", choices=list(atsc_nims))
    atsc_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_atsc = ConfigSelection(
        default='-2', choices=atsc_nims)

    SystemInfo['DVB-S_priority_tuner_available'] = len(dvbs_nims) > 3 and any(
        len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims))
    SystemInfo['DVB-T_priority_tuner_available'] = len(dvbt_nims) > 3 and any(
        len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims))
    SystemInfo['DVB-C_priority_tuner_available'] = len(dvbc_nims) > 3 and any(
        len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims))
    SystemInfo['ATSC_priority_tuner_available'] = len(atsc_nims) > 3 and any(
        len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims))

    config.misc.disable_background_scan = ConfigYesNo(default=False)
    config.usage.show_event_progress_in_servicelist = ConfigSelection(
        default='barright',
        choices=[('barleft', _('Progress bar left')),
                 ('barright', _('Progress bar right')),
                 ('percleft', _('Percentage left')),
                 ('percright', _('Percentage right')), ('no', _('No'))])
    config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(
        default=True)
    config.usage.show_event_progress_in_servicelist.addNotifier(
        refreshServiceList)
    config.usage.show_channel_numbers_in_servicelist.addNotifier(
        refreshServiceList)
    config.usage.blinking_display_clock_during_recording = ConfigYesNo(
        default=False)
    config.usage.show_message_when_recording_starts = ConfigYesNo(default=True)
    config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(
        default=True)
    config.usage.show_icons_in_movielist = ConfigSelection(
        default='i',
        choices=[('o', _('Off')), ('p', _('Progress')),
                 ('s', _('Small progress')), ('i', _('Icons'))])

    config.usage.movielist_unseen = ConfigYesNo(default=False)

    config.usage.swap_snr_on_osd = ConfigYesNo(default=False)

    def SpinnerOnOffChanged(configElement):
        setSpinnerOnOff(int(configElement.value))

    config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)

    def EnableTtCachingChanged(configElement):
        setEnableTtCachingOnOff(int(configElement.value))

    config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)

    def TunerTypePriorityOrderChanged(configElement):
        setTunerTypePriorityOrder(int(configElement.value))

    config.usage.alternatives_priority.addNotifier(
        TunerTypePriorityOrderChanged, immediate_feedback=False)

    def PreferredTunerChanged(configElement):
        setPreferredTuner(int(configElement.value))

    config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
    config.usage.hide_zap_errors = ConfigYesNo(default=False)
    config.usage.hide_ci_messages = ConfigYesNo(default=True)
    config.usage.show_cryptoinfo = ConfigYesNo(default=True)
    config.usage.show_eit_nownext = ConfigYesNo(default=True)
    config.usage.show_vcr_scart = ConfigYesNo(default=False)
    config.usage.show_update_disclaimer = ConfigYesNo(default=True)
    config.usage.pic_resolution = ConfigSelection(
        default=None,
        choices=[
            (None, _('Same resolution as skin')), ('(720, 576)', '720x576'),
            ('(1280, 720)', '1280x720'), ('(1920, 1080)', '1920x1080')
        ][:SystemInfo['HasFullHDSkinSupport'] and 4 or 3])
    if SystemInfo['Fan']:
        choicelist = [('off', _('Off')), ('on', _('On')), ('auto', _('Auto'))]
        if os.path.exists('/proc/stb/fp/fan_choices'):
            choicelist = [
                x for x in choicelist if x[0] in open(
                    '/proc/stb/fp/fan_choices', 'r').read().strip().split(' ')
            ]
        config.usage.fan = ConfigSelection(choicelist)

        def fanChanged(configElement):
            open(SystemInfo['Fan'], 'w').write(configElement.value)

        config.usage.fan.addNotifier(fanChanged)
    if SystemInfo['FanPWM']:

        def fanSpeedChanged(configElement):
            open(SystemInfo['FanPWM'], 'w').write(hex(configElement.value)[2:])

        config.usage.fanspeed = ConfigSlider(default=127,
                                             increment=8,
                                             limits=(0, 255))
        config.usage.fanspeed.addNotifier(fanSpeedChanged)
    if SystemInfo['StandbyLED']:

        def standbyLEDChanged(configElement):
            open(SystemInfo['StandbyLED'],
                 'w').write(configElement.value and 'on' or 'off')

        config.usage.standbyLED = ConfigYesNo(default=True)
        config.usage.standbyLED.addNotifier(standbyLEDChanged)

        if SystemInfo["PowerOffDisplay"]:

            def powerOffDisplayChanged(configElement):
                open(SystemInfo["PowerOffDisplay"],
                     "w").write(configElement.value and "1" or "0")

            config.usage.powerOffDisplay = ConfigYesNo(default=True)
            config.usage.powerOffDisplay.addNotifier(powerOffDisplayChanged)

    if SystemInfo['WakeOnLAN']:

        def wakeOnLANChanged(configElement):
            if 'fp' in SystemInfo['WakeOnLAN']:
                open(SystemInfo['WakeOnLAN'],
                     'w').write(configElement.value and 'enable' or 'disable')
            else:
                open(SystemInfo['WakeOnLAN'],
                     'w').write(configElement.value and 'on' or 'off')

        config.usage.wakeOnLAN = ConfigYesNo(default=False)
        config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged)

    if SystemInfo["hasXcoreVFD"]:

        def set12to8characterVFD(configElement):
            open(SystemInfo["hasXcoreVFD"],
                 "w").write(not configElement.value and "1" or "0")

        config.usage.toggle12to8characterVFD = ConfigYesNo(default=False)
        config.usage.toggle12to8characterVFD.addNotifier(set12to8characterVFD)

    if SystemInfo["LcdLiveTVMode"]:

        def setLcdLiveTVMode(configElement):
            open(SystemInfo["LcdLiveTVMode"], "w").write(configElement.value)

        config.usage.LcdLiveTVMode = ConfigSelection(
            default="0", choices=[str(x) for x in range(0, 9)])
        config.usage.LcdLiveTVMode.addNotifier(setLcdLiveTVMode)

    config.epg = ConfigSubsection()
    config.epg.eit = ConfigYesNo(default=True)
    config.epg.mhw = ConfigYesNo(default=False)
    config.epg.freesat = ConfigYesNo(default=True)
    config.epg.viasat = ConfigYesNo(default=True)
    config.epg.netmed = ConfigYesNo(default=True)
    config.epg.virgin = ConfigYesNo(default=False)
    config.misc.showradiopic = ConfigYesNo(default=True)

    def EpgSettingsChanged(configElement):
        from enigma import eEPGCache
        mask = 4294967295L
        if not config.epg.eit.value:
            mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE
                      | eEPGCache.SCHEDULE_OTHER)
        if not config.epg.mhw.value:
            mask &= ~eEPGCache.MHW
        if not config.epg.freesat.value:
            mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE
                      | eEPGCache.FREESAT_SCHEDULE_OTHER)
        if not config.epg.viasat.value:
            mask &= ~eEPGCache.VIASAT
        if not config.epg.netmed.value:
            mask &= ~(eEPGCache.NETMED_SCHEDULE
                      | eEPGCache.NETMED_SCHEDULE_OTHER)
        if not config.epg.virgin.value:
            mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
        eEPGCache.getInstance().setEpgSources(mask)

    config.epg.eit.addNotifier(EpgSettingsChanged)
    config.epg.mhw.addNotifier(EpgSettingsChanged)
    config.epg.freesat.addNotifier(EpgSettingsChanged)
    config.epg.viasat.addNotifier(EpgSettingsChanged)
    config.epg.netmed.addNotifier(EpgSettingsChanged)
    config.epg.virgin.addNotifier(EpgSettingsChanged)
    config.epg.histminutes = ConfigSelectionNumber(min=0,
                                                   max=120,
                                                   stepwidth=15,
                                                   default=0,
                                                   wraparound=True)

    def EpgHistorySecondsChanged(configElement):
        from enigma import eEPGCache
        eEPGCache.getInstance().setEpgHistorySeconds(
            config.epg.histminutes.getValue() * 60)

    config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)

    def setHDDStandby(configElement):
        for hdd in harddiskmanager.HDDList():
            hdd[1].setIdleTime(int(configElement.value))

    config.usage.hdd_standby.addNotifier(setHDDStandby,
                                         immediate_feedback=False)
    if SystemInfo['12V_Output']:

        def set12VOutput(configElement):
            Misc_Options.getInstance().set_12V_output(
                configElement.value == 'on' and 1 or 0)

        config.usage.output_12V.addNotifier(set12VOutput,
                                            immediate_feedback=False)
    config.usage.keymap = ConfigText(
        default=eEnv.resolve('${datadir}/enigma2/keymap.xml'))
    config.usage.keytrans = ConfigText(
        default=eEnv.resolve('${datadir}/enigma2/keytranslation.xml'))
    config.seek = ConfigSubsection()
    config.seek.selfdefined_13 = ConfigNumber(default=15)
    config.seek.selfdefined_46 = ConfigNumber(default=60)
    config.seek.selfdefined_79 = ConfigNumber(default=300)
    config.seek.speeds_forward = ConfigSet(
        default=[2, 4, 8, 16, 32, 64, 128],
        choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
    config.seek.speeds_backward = ConfigSet(
        default=[2, 4, 8, 16, 32, 64, 128],
        choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
    config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8],
                                              choices=[2, 4, 6, 8, 12, 16, 25])
    config.seek.enter_forward = ConfigSelection(default='2',
                                                choices=[
                                                    '2', '4', '6', '8', '12',
                                                    '16', '24', '32', '48',
                                                    '64', '96', '128'
                                                ])
    config.seek.enter_backward = ConfigSelection(default='1',
                                                 choices=[
                                                     '1', '2', '4', '6', '8',
                                                     '12', '16', '24', '32',
                                                     '48', '64', '96', '128'
                                                 ])
    config.seek.on_pause = ConfigSelection(default='play',
                                           choices=[('play', _('Play')),
                                                    ('step',
                                                     _('Single step (GOP)')),
                                                    ('last', _('Last speed'))])
    config.usage.timerlist_finished_timer_position = ConfigSelection(
        default='end',
        choices=[('beginning', _('At beginning')), ('end', _('At end'))])

    def updateEnterForward(configElement):
        if not configElement.value:
            configElement.value = [2]
        updateChoices(config.seek.enter_forward, configElement.value)

    config.seek.speeds_forward.addNotifier(updateEnterForward,
                                           immediate_feedback=False)

    def updateEnterBackward(configElement):
        if not configElement.value:
            configElement.value = [2]
        updateChoices(config.seek.enter_backward, configElement.value)

    config.seek.speeds_backward.addNotifier(updateEnterBackward,
                                            immediate_feedback=False)

    def updateEraseSpeed(el):
        eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))

    def updateEraseFlags(el):
        eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))

    config.misc.erase_speed = ConfigSelection(default="20",
                                              choices=[("10", _("10 MB/s")),
                                                       ("20", _("20 MB/s")),
                                                       ("50", _("50 MB/s")),
                                                       ("100", _("100 MB/s"))])
    config.misc.erase_speed.addNotifier(updateEraseSpeed,
                                        immediate_feedback=False)
    config.misc.erase_flags = ConfigSelection(default='1',
                                              choices=[
                                                  ('0', _('Disable')),
                                                  ('1',
                                                   _('Internal hdd only')),
                                                  ('3', _('Everywhere'))
                                              ])
    config.misc.erase_flags.addNotifier(updateEraseFlags,
                                        immediate_feedback=False)

    if SystemInfo['ZapMode']:

        def setZapmode(el):
            open(SystemInfo['ZapMode'], 'w').write(el.value)

        config.misc.zapmode = ConfigSelection(
            default='mute',
            choices=[('mute', _('Black screen')), ('hold', _('Hold screen')),
                     ('mutetilllock', _('Black screen till locked')),
                     ('holdtilllock', _('Hold till locked'))])
        config.misc.zapmode.addNotifier(setZapmode, immediate_feedback=False)
    config.usage.historymode = ConfigSelection(default='1',
                                               choices=[('0', _('Just zap')),
                                                        ('1', _('Show menu'))])

    if SystemInfo['VFD_scroll_repeats']:

        def scroll_repeats(el):
            open(SystemInfo['VFD_scroll_repeats'], 'w').write(el.value)

        choicelist = []
        for i in range(1, 11, 1):
            choicelist.append(str(i))
        config.usage.vfd_scroll_repeats = ConfigSelection(default='3',
                                                          choices=choicelist)
        config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats,
                                                    immediate_feedback=False)

    if SystemInfo['VFD_scroll_delay']:

        def scroll_delay(el):
            open(SystemInfo['VFD_scroll_delay'], 'w').write(el.value)

        choicelist = []
        for i in range(0, 1001, 50):
            choicelist.append(str(i))
        config.usage.vfd_scroll_delay = ConfigSelection(default='150',
                                                        choices=choicelist)
        config.usage.vfd_scroll_delay.addNotifier(scroll_delay,
                                                  immediate_feedback=False)

    if SystemInfo['VFD_initial_scroll_delay']:

        def initial_scroll_delay(el):
            open(SystemInfo['VFD_initial_scroll_delay'], 'w').write(el.value)

        choicelist = []
        for i in range(0, 20001, 500):
            choicelist.append(str(i))
        config.usage.vfd_initial_scroll_delay = ConfigSelection(
            default='1000', choices=choicelist)
        config.usage.vfd_initial_scroll_delay.addNotifier(
            initial_scroll_delay, immediate_feedback=False)

    if SystemInfo['VFD_final_scroll_delay']:

        def final_scroll_delay(el):
            open(SystemInfo['VFD_final_scroll_delay'], 'w').write(el.value)

        choicelist = []
        for i in range(0, 20001, 500):
            choicelist.append(str(i))
        config.usage.vfd_final_scroll_delay = ConfigSelection(
            default='1000', choices=choicelist)
        config.usage.vfd_final_scroll_delay.addNotifier(
            final_scroll_delay, immediate_feedback=False)

    if SystemInfo['HasForceLNBOn']:

        def forceLNBPowerChanged(configElement):
            open(SystemInfo['HasForceLNBOn'], 'w').write(configElement.value)

        config.misc.forceLnbPower = ConfigSelection(default='on',
                                                    choices=[('on', _('Yes')),
                                                             ('off', _('No'))])
        config.misc.forceLnbPower.addNotifier(forceLNBPowerChanged)

    if SystemInfo['HasForceToneburst']:

        def forceToneBurstChanged(configElement):
            open(SystemInfo['HasForceToneburst'],
                 'w').write(configElement.value)

        config.misc.forceToneBurst = ConfigSelection(default='enable',
                                                     choices=[
                                                         ('enable', _('Yes')),
                                                         ('disable', _('No'))
                                                     ])
        config.misc.forceToneBurst.addNotifier(forceToneBurstChanged)

    if SystemInfo['HasBypassEdidChecking']:

        def setHasBypassEdidChecking(configElement):
            open(SystemInfo['HasBypassEdidChecking'],
                 'w').write(configElement.value)

        config.av.bypassEdidChecking = ConfigSelection(default='00000000',
                                                       choices=[('00000001',
                                                                 _('Yes')),
                                                                ('00000000',
                                                                 _('No'))])
        config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking)

    if SystemInfo['HasColorspace']:

        def setHaveColorspace(configElement):
            open(SystemInfo['HasColorspace'], 'w').write(configElement.value)

        if SystemInfo['HasColorspaceSimple']:
            config.av.hdmicolorspace = ConfigSelection(default='Edid(Auto)',
                                                       choices={
                                                           'Edid(Auto)':
                                                           _('Auto'),
                                                           'Hdmi_Rgb': _('RGB')
                                                       })
        else:
            config.av.hdmicolorspace = ConfigSelection(default='auto',
                                                       choices={
                                                           'auto': _('auto'),
                                                           'rgb': _('rgb'),
                                                           '420': _('420'),
                                                           '422': _('422'),
                                                           '444': _('444')
                                                       })
        config.av.hdmicolorspace.addNotifier(setHaveColorspace)
    config.subtitles = ConfigSubsection()
    config.subtitles.ttx_subtitle_colors = ConfigSelection(
        default='1',
        choices=[('0', _('original')), ('1', _('white')), ('2', _('yellow'))])
    config.subtitles.ttx_subtitle_original_position = ConfigYesNo(
        default=False)
    config.subtitles.subtitle_position = ConfigSelection(choices=[
        '0', '10', '20', '30', '40', '50', '60', '70', '80', '90', '100',
        '150', '200', '250', '300', '350', '400', '450'
    ],
                                                         default='50')
    config.subtitles.subtitle_alignment = ConfigSelection(choices=[
        ('left', _('left')), ('center', _('center')), ('right', _('right'))
    ],
                                                          default='center')
    config.subtitles.subtitle_rewrap = ConfigYesNo(default=False)
    config.subtitles.colourise_dialogs = ConfigYesNo(default=False)
    config.subtitles.subtitle_borderwidth = ConfigSelection(
        choices=['1', '2', '3', '4', '5'], default='3')
    config.subtitles.subtitle_fontsize = ConfigSelection(
        choices=['%d' % x for x in range(16, 101) if not x % 2], default='40')
    config.subtitles.showbackground = ConfigYesNo(default=False)
    subtitle_delay_choicelist = []
    for i in range(-900000, 1845000, 45000):
        if i == 0:
            subtitle_delay_choicelist.append(('0', _('No delay')))
        else:
            subtitle_delay_choicelist.append(
                (str(i), _("%2.1f sec") % (i / 90000.)))

    config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(
        default='315000', choices=subtitle_delay_choicelist)
    config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default=False)
    config.subtitles.dvb_subtitles_original_position = ConfigSelection(
        default='0',
        choices=[('0', _('Original')), ('1', _('Fixed')),
                 ('2', _('Relative'))])
    config.subtitles.dvb_subtitles_centered = ConfigYesNo(default=False)
    config.subtitles.subtitle_bad_timing_delay = ConfigSelection(
        default='0', choices=subtitle_delay_choicelist)
    config.subtitles.dvb_subtitles_backtrans = ConfigSelection(
        default='0',
        choices=[('0', _('No transparency')), ('25', '10%'), ('50', '20%'),
                 ('75', '30%'), ('100', '40%'), ('125', '50%'), ('150', '60%'),
                 ('175', '70%'), ('200', '80%'), ('225', '90%'),
                 ('255', _('Full transparency'))])
    config.subtitles.pango_subtitle_colors = ConfigSelection(
        default='1',
        choices=[('0', _('alternative')), ('1', _('white')),
                 ('2', _('yellow'))])
    config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default=True)
    config.subtitles.pango_subtitles_delay = ConfigSelection(
        default='0', choices=subtitle_delay_choicelist)
    config.subtitles.pango_subtitles_fps = ConfigSelection(
        default='1',
        choices=[('1', _('Original')), ('23976', _('23.976')),
                 ('24000', _('24')), ('25000', _('25')), ('29970', _('29.97')),
                 ('30000', _('30'))])
    config.subtitles.pango_autoturnon = ConfigYesNo(default=True)
    config.autolanguage = ConfigSubsection()
    audio_language_choices = [
        ('---', _('None')),
        ('orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ',
         _('Original')), ('ara', _('Arabic')), ('eus baq', _('Basque')),
        ('bul', _('Bulgarian')),
        ('hrv', _('Croatian')), ('ces cze', _('Czech')), ('dan', _('Danish')),
        ('dut ndl', _('Dutch')), ('eng qaa', _('English')),
        ('est', _('Estonian')), ('fin', _('Finnish')),
        ('fra fre', _('French')), ('deu ger', _('German')),
        ('ell gre', _('Greek')), ('heb', _('Hebrew')), ('hun', _('Hungarian')),
        ('ita', _('Italian')), ('lav', _('Latvian')), ('lit', _('Lithuanian')),
        ('ltz', _('Luxembourgish')), ('nor', _('Norwegian')),
        ('pol', _('Polish')), ('por dub DUB', _('Portuguese')),
        ('fas per', _('Persian')), ('ron rum', _('Romanian')),
        ('rus', _('Russian')), ('srp', _('Serbian')), ('slk slo', _('Slovak')),
        ('slv', _('Slovenian')), ('spa', _('Spanish')), ('swe', _('Swedish')),
        ('tha', _('Thai')), ('tur Audio_TUR', _('Turkish')),
        ('ukr Ukr', _('Ukrainian'))
    ]

    def setEpgLanguage(configElement):
        eServiceEvent.setEPGLanguage(configElement.value)

    config.autolanguage.audio_epglanguage = ConfigSelection(
        audio_language_choices[:1] + audio_language_choices[2:], default='---')
    config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)

    def setEpgLanguageAlternative(configElement):
        eServiceEvent.setEPGLanguageAlternative(configElement.value)

    config.autolanguage.audio_epglanguage_alternative = ConfigSelection(
        audio_language_choices[:1] + audio_language_choices[2:], default='---')
    config.autolanguage.audio_epglanguage_alternative.addNotifier(
        setEpgLanguageAlternative)
    config.autolanguage.audio_autoselect1 = ConfigSelection(
        choices=audio_language_choices, default='---')
    config.autolanguage.audio_autoselect2 = ConfigSelection(
        choices=audio_language_choices, default='---')
    config.autolanguage.audio_autoselect3 = ConfigSelection(
        choices=audio_language_choices, default='---')
    config.autolanguage.audio_autoselect4 = ConfigSelection(
        choices=audio_language_choices, default='---')
    config.autolanguage.audio_defaultac3 = ConfigYesNo(default=False)
    config.autolanguage.audio_defaultddp = ConfigYesNo(default=False)
    config.autolanguage.audio_usecache = ConfigYesNo(default=True)
    subtitle_language_choices = audio_language_choices[:
                                                       1] + audio_language_choices[
                                                           2:]
    config.autolanguage.subtitle_autoselect1 = ConfigSelection(
        choices=subtitle_language_choices, default='---')
    config.autolanguage.subtitle_autoselect2 = ConfigSelection(
        choices=subtitle_language_choices, default='---')
    config.autolanguage.subtitle_autoselect3 = ConfigSelection(
        choices=subtitle_language_choices, default='---')
    config.autolanguage.subtitle_autoselect4 = ConfigSelection(
        choices=subtitle_language_choices, default='---')
    config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default=False)
    config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default=False)
    config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default=False)
    config.autolanguage.subtitle_usecache = ConfigYesNo(default=True)
    config.autolanguage.equal_languages = ConfigSelection(default='15',
                                                          choices=[
                                                              ('0', _('None')),
                                                              ('1', '1'),
                                                              ('2', '2'),
                                                              ('3', '1,2'),
                                                              ('4', '3'),
                                                              ('5', '1,3'),
                                                              ('6', '2,3'),
                                                              ('7', '1,2,3'),
                                                              ('8', '4'),
                                                              ('9', '1,4'),
                                                              ('10', '2,4'),
                                                              ('11', '1,2,4'),
                                                              ('12', '3,4'),
                                                              ('13', '1,3,4'),
                                                              ('14', '2,3,4'),
                                                              ('15', _('All'))
                                                          ])
    config.streaming = ConfigSubsection()
    config.streaming.stream_ecm = ConfigYesNo(default=False)
    config.streaming.descramble = ConfigYesNo(default=True)
    config.streaming.descramble_client = ConfigYesNo(default=False)
    config.streaming.stream_eit = ConfigYesNo(default=True)
    config.streaming.stream_ait = ConfigYesNo(default=True)
    config.streaming.authentication = ConfigYesNo(default=False)
    config.mediaplayer = ConfigSubsection()
    config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False)
    config.mediaplayer.alternateUserAgent = ConfigText(default='')
Ejemplo n.º 4
0
def InitUsageConfig():
	config.misc.useNTPminutes = ConfigSelection(default="30", choices=[("30", "30" + " " + _("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))])
	if getBrandOEM() in ('vuplus'):
		config.misc.remotecontrol_text_support = ConfigYesNo(default=True)
	else:
		config.misc.remotecontrol_text_support = ConfigYesNo(default=False)

	config.usage = ConfigSubsection()
	config.usage.showdish = ConfigSelection(default="flashing", choices=[("flashing", _("Flashing")), ("normal", _("Not Flashing")), ("off", _("Off"))])
	config.usage.multibouquet = ConfigYesNo(default=True)

	config.usage.alternative_number_mode = ConfigYesNo(default=True)

	def alternativeNumberModeChange(configElement):
		eDVBDB.getInstance().setNumberingMode(configElement.value)
		refreshServiceList()

	config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)

	config.usage.servicetype_icon_mode = ConfigSelection(default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
	config.usage.crypto_icon_mode = ConfigSelection(default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
	config.usage.record_indicator_mode = ConfigSelection(default="3", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
	config.usage.record_indicator_mode.addNotifier(refreshServiceList)

	choicelist = [("-1", _("Disable"))]
	for i in range(0, 1300, 100):
		choicelist.append(("%d" % i, ngettext("%d pixel wide", "%d pixels wide", i) % i))
	config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
	config.usage.servicelist_column.addNotifier(refreshServiceList)

	config.usage.service_icon_enable = ConfigYesNo(default=True)
	config.usage.service_icon_enable.addNotifier(refreshServiceList)
	config.usage.servicelist_cursor_behavior = ConfigSelection(default="keep", choices=[
		("standard", _("Standard")),
		("keep", _("Keep service")),
		("reverseB", _("Reverse bouquet buttons")),
		("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])

	config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False)

	# config.usage.defaultEPGType sets the guide type for
	# the INFO button

	config.usage.defaultEPGType = ConfigSelection(default="None", choices=[])
	if config.usage.defaultEPGType.saved_value is not None:
		config.usage.defaultEPGType.setChoices([config.usage.defaultEPGType.saved_value])
		config.usage.defaultEPGType.load()

	# config.usage.defaultGuideType sets the guide type for
	# the EPG button

	config.usage.defaultGuideType = ConfigSelection(default="None", choices=[])
	if config.usage.defaultGuideType.saved_value is not None:
		config.usage.defaultGuideType.setChoices([config.usage.defaultGuideType.saved_value])
		config.usage.defaultGuideType.load()

	config.usage.panicbutton = ConfigYesNo(default=False)
	config.usage.quickzap_bouquet_change = ConfigYesNo(default=False)
	config.usage.e1like_radio_mode = ConfigYesNo(default=True)

	choicelist = []
	for i in range(1, 10) + range(10, 91, 10):
		choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
	config.usage.infobar_timeout = ConfigSelection(default="5", choices=[("0", _("No timeout"))] + choicelist)
	config.usage.show_infobar_do_dimming = ConfigYesNo(default=True)
	config.usage.show_infobar_dimming_speed = ConfigSelectionNumber(min=1, max=40, stepwidth=1, default=40, wraparound=True)
	config.usage.show_infobar_on_zap = ConfigYesNo(default=True)
	config.usage.show_infobar_on_skip = ConfigYesNo(default=True)
	config.usage.show_infobar_on_event_change = ConfigYesNo(default=False)

	config.usage.show_infobar_channel_number = ConfigYesNo(default=False)
	config.usage.show_second_infobar = ConfigYesNo(default=True)
	config.usage.second_infobar_timeout = ConfigSelection(default="0", choices=[("0", _("no timeout"))] + choicelist)

	config.usage.infobar_frontend_source = ConfigSelection(default="tuner", choices=[("settings", _("Settings")), ("tuner", _("Tuner"))])

	config.usage.show_picon_bkgrn = ConfigSelection(default="transparent", choices=[("none", _("Disabled")), ("transparent", _("Transparent")), ("blue", _("Blue")), ("red", _("Red")), ("black", _("Black")), ("white", _("White")), ("lightgrey", _("Light Grey")), ("grey", _("Grey"))])

	config.usage.show_spinner = ConfigYesNo(default=True)
	config.usage.enable_tt_caching = ConfigYesNo(default=True)
	config.usage.sort_settings = ConfigYesNo(default=False)
	config.usage.sort_menus = ConfigYesNo(default=False)
	config.usage.sort_pluginlist = ConfigYesNo(default=True)
	config.usage.movieplayer_pvrstate = ConfigYesNo(default=True)

	choicelist = []
	for i in (10, 30):
		choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300, 600, 1200, 1800):
		m = i / 60
		choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
	for i in (3600, 7200, 14400):
		h = i / 3600
		choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h))
	config.usage.hdd_standby = ConfigSelection(default="300", choices=[("0", _("No standby"))] + choicelist)
	config.usage.output_12V = ConfigSelection(default="do not change", choices=[
		("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On"))])

	config.usage.pip_zero_button = ConfigSelection(default="standard", choices=[
		("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
		("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP"))])
	config.usage.pip_hideOnExit = ConfigSelection(default="no", choices=[
		("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup"))])
	choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
	for i in [60, 300, 600, 900, 1800, 2700, 3600]:
		m = i / 60
		choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
	config.usage.pip_last_service_timeout = ConfigSelection(default="0", choices=choicelist)

	if not os.path.exists(resolveFilename(SCOPE_HDD)):
		try:
			os.mkdir(resolveFilename(SCOPE_HDD), 0755)
		except:
			pass
	config.usage.default_path = ConfigText(default=resolveFilename(SCOPE_HDD))
	if not config.usage.default_path.value.endswith('/'):
		tmpvalue = config.usage.default_path.value
		config.usage.default_path.setValue(tmpvalue + '/')
		config.usage.default_path.save()

	def defaultpathChanged(configElement):
		if not config.usage.default_path.value.endswith('/'):
			tmpvalue = config.usage.default_path.value
			config.usage.default_path.setValue(tmpvalue + '/')
			config.usage.default_path.save()

	config.usage.default_path.addNotifier(defaultpathChanged, immediate_feedback=False)

	config.usage.timer_path = ConfigText(default="<default>")
	config.usage.instantrec_path = ConfigText(default="<default>")

	if not os.path.exists(resolveFilename(SCOPE_TIMESHIFT)):
		try:
			os.mkdir(resolveFilename(SCOPE_TIMESHIFT), 0755)
		except:
			pass
	config.usage.timeshift_path = ConfigText(default=resolveFilename(SCOPE_TIMESHIFT))
	if not config.usage.default_path.value.endswith('/'):
		tmpvalue = config.usage.timeshift_path.value
		config.usage.timeshift_path.setValue(tmpvalue + '/')
		config.usage.timeshift_path.save()

	def timeshiftpathChanged(configElement):
		if not config.usage.timeshift_path.value.endswith('/'):
			tmpvalue = config.usage.timeshift_path.value
			config.usage.timeshift_path.setValue(tmpvalue + '/')
			config.usage.timeshift_path.save()

	config.usage.timeshift_path.addNotifier(timeshiftpathChanged, immediate_feedback=False)
	config.usage.allowed_timeshift_paths = ConfigLocations(default=[resolveFilename(SCOPE_TIMESHIFT)])

	config.usage.movielist_trashcan = ConfigYesNo(default=True)
	config.usage.movielist_trashcan_network_clean = ConfigYesNo(default=False)
	config.usage.movielist_trashcan_days = ConfigSelectionNumber(default=8, min=1, max=31, stepwidth=1, wraparound=True)
	config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
	config.usage.on_movie_start = ConfigSelection(default="ask yes", choices=[
		("ask yes", _("Ask user (with default as 'yes')")),
		("ask no", _("Ask user (with default as 'no')")),
		("resume", _("Resume from last position")),
		("beginning", _("Start from the beginning"))])
	config.usage.on_movie_stop = ConfigSelection(default="movielist", choices=[
		("ask", _("Ask user")),
		("movielist", _("Return to movie list")),
		("quit", _("Return to previous service"))])
	config.usage.on_movie_eof = ConfigSelection(default="movielist", choices=[
		("ask", _("Ask user")),
		("movielist", _("Return to movie list")),
		("quit", _("Return to previous service")),
		("pause", _("Pause movie at end")),
		("playlist", _("Play next (return to movie list)")),
		("playlistquit", _("Play next (return to previous service)")),
		("loop", _("Continues play (loop)")),
		("repeatcurrent", _("Repeat"))])
	config.usage.leave_movieplayer_onExit = ConfigSelection(default="no", choices=[
		("no", _("No")),
		("popup", _("With popup")),
		("without popup", _("Without popup"))])
	config.usage.next_movie_msg = ConfigYesNo(default=True)
	config.usage.last_movie_played = ConfigText()

	config.usage.setup_level = ConfigSelection(default="expert", choices=[
		("simple", _("Simple")),
		("intermediate", _("Intermediate")),
		("expert", _("Expert"))])

	config.usage.help_sortorder = ConfigSelection(default="headings+alphabetic", choices=[
		("headings+alphabetic", _("Alphabetical under headings")),
		("flat+alphabetic", _("Flat alphabetical")),
		("flat+remotepos", _("Flat by position on remote")),
		("flat+remotegroups", _("Flat by key group on remote"))])

	config.usage.on_long_powerpress = ConfigSelection(default="show_menu", choices=[
		("show_menu", _("Show shutdown menu")),
		("shutdown", _("Immediate shutdown")),
		("standby", _("Standby"))])

	config.usage.on_short_powerpress = ConfigSelection(default="standby", choices=[
		("show_menu", _("Show shutdown menu")),
		("shutdown", _("Immediate shutdown")),
		("standby", _("Standby"))])

	choicelist = [("0", "Disabled")]
	for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600):
		if i < 60:
			m = ngettext("%d second", "%d seconds", i) % i
		else:
			m = abs(i / 60)
			m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append(("%d" % i, m))
	config.usage.screen_saver = ConfigSelection(default="0", choices=choicelist)

	config.usage.check_timeshift = ConfigYesNo(default=True)

	config.usage.alternatives_priority = ConfigSelection(default="5", choices=[
		("0", "DVB-S/-C/-T"),
		("1", "DVB-S/-T/-C"),
		("2", "DVB-C/-S/-T"),
		("3", "DVB-C/-T/-S"),
		("4", "DVB-T/-C/-S"),
		("5", "DVB-T/-S/-C"),
		("127", "No priority")])

	config.usage.remote_fallback_enabled = ConfigYesNo(default=False)
	config.usage.remote_fallback = ConfigText(default="", fixed_size=False)

	nims = [("-1", _("auto"))]
	rec_nims = [("-2", _("Disabled")), ("-1", _("auto"))]
	for x in nimmanager.nim_slots:
		nims.append((str(x.slot), x.getSlotName()))
		rec_nims.append((str(x.slot), x.getSlotName()))
	try:
		config.usage.frontend_priority = ConfigSelection(default="0", choices=nims)
	except:
		config.usage.frontend_priority = ConfigSelection(default="-1", choices=nims)
	config.usage.recording_frontend_priority = ConfigSelection(default="-2", choices=rec_nims)
	config.misc.disable_background_scan = ConfigYesNo(default=False)

	config.usage.jobtaksextensions = ConfigYesNo(default=True)

	config.usage.servicenum_fontsize = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.usage.servicename_fontsize = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.usage.serviceitems_per_page = ConfigSelectionNumber(default=10, stepwidth=1, min=3, max=40, wraparound=True)
	config.usage.show_servicelist = ConfigYesNo(default=True)
	config.usage.servicelist_mode = ConfigSelection(default="standard", choices=[
		("standard", _("Standard")),
		("simple", _("Simple"))])
	config.usage.servicelistpreview_mode = ConfigYesNo(default=False)
	config.usage.tvradiobutton_mode = ConfigSelection(default="BouquetList", choices=[
		("ChannelList", _("Channel List")),
		("BouquetList", _("Bouquet List")),
		("MovieList", _("Movie List"))])
	config.usage.channelbutton_mode = ConfigSelection(default="0", choices=[
		("0", _("Just change channels")),
		("1", _("Channel List")),
		("2", _("Bouquet List"))])
	config.usage.show_bouquetalways = ConfigYesNo(default=False)
	config.usage.show_event_progress_in_servicelist = ConfigSelection(default='barright', choices=[
		('barleft', _("Progress bar left")),
		('barright', _("Progress bar right")),
		('percleft', _("Percentage left")),
		('percright', _("Percentage right")),
		('no', _("No"))])
	config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default=True)
	config.usage.show_channel_jump_in_servicelist = ConfigSelection(default="alpha", choices=[
		("quick", _("Quick actions")),
		("alpha", _("Alpha search")),
		("number", _("Number search"))])

	config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
	config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)

	config.usage.blinking_display_clock_during_recording = ConfigYesNo(default=False)

	config.usage.show_message_when_recording_starts = ConfigYesNo(default=False)

	config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default=True)
	config.usage.show_icons_in_movielist = ConfigSelection(default='i', choices=[
		('o', _("Off")),
		('p', _("Progress")),
		('s', _("Small progress")),
		('i', _("Icons")),
	])
	config.usage.movielist_unseen = ConfigYesNo(default=True)

	config.usage.swap_snr_on_osd = ConfigYesNo(default=False)
	config.usage.swap_time_display_on_osd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_media_time_display_on_osd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_time_remaining_on_osd = ConfigSelection(default="0", choices=[("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
	config.usage.elapsed_time_positive_osd = ConfigYesNo(default=False)
	config.usage.swap_time_display_on_vfd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_media_time_display_on_vfd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_time_remaining_on_vfd = ConfigSelection(default="0", choices=[("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
	config.usage.elapsed_time_positive_vfd = ConfigYesNo(default=False)

	config.usage.lcd_scroll_delay = ConfigSelection(default="10000", choices=[
		("10000", "10 " + _("seconds")),
		("20000", "20 " + _("seconds")),
		("30000", "30 " + _("seconds")),
		("60000", "1 " + _("minute")),
		("300000", "5 " + _("minutes")),
		("noscrolling", _("off"))])
	config.usage.lcd_scroll_speed = ConfigSelection(default="300", choices=[
		("500", _("slow")),
		("300", _("normal")),
		("100", _("fast"))])

	def SpinnerOnOffChanged(configElement):
		setSpinnerOnOff(int(configElement.value))

	config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)

	def EnableTtCachingChanged(configElement):
		setEnableTtCachingOnOff(int(configElement.value))

	config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)

	def TunerTypePriorityOrderChanged(configElement):
		setTunerTypePriorityOrder(int(configElement.value))

	config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)

	def PreferredTunerChanged(configElement):
		setPreferredTuner(int(configElement.value))

	config.usage.frontend_priority.addNotifier(PreferredTunerChanged)

	config.usage.hide_zap_errors = ConfigYesNo(default=True)
	config.usage.hide_ci_messages = ConfigYesNo(default=True)
	config.usage.show_cryptoinfo = ConfigSelection(default="0", choices=[("0", _("Off")), ("1", _("One line")), ("2", _("Two lines"))])
	config.usage.show_eit_nownext = ConfigYesNo(default=True)
	config.usage.show_vcr_scart = ConfigYesNo(default=False)
	config.usage.pic_resolution = ConfigSelection(default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)", "720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")])

	config.epg = ConfigSubsection()
	config.epg.eit = ConfigYesNo(default=True)
	config.epg.mhw = ConfigYesNo(default=False)
	config.epg.freesat = ConfigYesNo(default=False)
	config.epg.viasat = ConfigYesNo(default=False)
	config.epg.netmed = ConfigYesNo(default=False)
	config.epg.virgin = ConfigYesNo(default=False)

	def EpgSettingsChanged(configElement):
		mask = 0xffffffff
		if not config.epg.eit.value:
			mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
		if not config.epg.mhw.value:
			mask &= ~eEPGCache.MHW
		if not config.epg.freesat.value:
			mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
		if not config.epg.viasat.value:
			mask &= ~eEPGCache.VIASAT
		if not config.epg.netmed.value:
			mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
		if not config.epg.virgin.value:
			mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
		eEPGCache.getInstance().setEpgSources(mask)

	config.epg.eit.addNotifier(EpgSettingsChanged)
	config.epg.mhw.addNotifier(EpgSettingsChanged)
	config.epg.freesat.addNotifier(EpgSettingsChanged)
	config.epg.viasat.addNotifier(EpgSettingsChanged)
	config.epg.netmed.addNotifier(EpgSettingsChanged)
	config.epg.virgin.addNotifier(EpgSettingsChanged)

	config.epg.histminutes = ConfigSelectionNumber(default=0, min=0, max=120, stepwidth=15, wraparound=True)

	def EpgHistorySecondsChanged(configElement):
		eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.value * 60)

	config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)

	config.epg.cacheloadsched = ConfigYesNo(default=False)
	config.epg.cachesavesched = ConfigYesNo(default=False)

	def EpgCacheLoadSchedChanged(configElement):
		import EpgLoadSave
		EpgLoadSave.EpgCacheLoadCheck()

	def EpgCacheSaveSchedChanged(configElement):
		import EpgLoadSave
		EpgLoadSave.EpgCacheSaveCheck()

	config.epg.cacheloadsched.addNotifier(EpgCacheLoadSchedChanged, immediate_feedback=False)
	config.epg.cachesavesched.addNotifier(EpgCacheSaveSchedChanged, immediate_feedback=False)
	config.epg.cacheloadtimer = ConfigSelectionNumber(default=24, stepwidth=1, min=1, max=24, wraparound=True)
	config.epg.cachesavetimer = ConfigSelectionNumber(default=24, stepwidth=1, min=1, max=24, wraparound=True)

	config.osd.dst_left = ConfigSelectionNumber(default=0, stepwidth=1, min=0, max=720, wraparound=False)
	config.osd.dst_width = ConfigSelectionNumber(default=720, stepwidth=1, min=0, max=720, wraparound=False)
	config.osd.dst_top = ConfigSelectionNumber(default=0, stepwidth=1, min=0, max=576, wraparound=False)
	config.osd.dst_height = ConfigSelectionNumber(default=576, stepwidth=1, min=0, max=576, wraparound=False)
	config.osd.alpha = ConfigSelectionNumber(default=255, stepwidth=1, min=0, max=255, wraparound=False)
	config.av.osd_alpha = NoSave(ConfigNumber(default=255))
	config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")), ("topandbottom", _("Top and Bottom"))], "auto")
	config.osd.threeDznorm = ConfigSlider(default=50, increment=1, limits=(0, 100))
	config.osd.show3dextensions = ConfigYesNo(default=False)

	hddchoises = [('/etc/enigma2/', 'Internal Flash')]
	for p in harddiskmanager.getMountedPartitions():
		if os.path.exists(p.mountpoint):
			d = os.path.normpath(p.mountpoint)
			if p.mountpoint != '/':
				hddchoises.append((p.mountpoint, d))
	config.misc.epgcachepath = ConfigSelection(default='/etc/enigma2/', choices=hddchoises)
	config.misc.epgcachefilename = ConfigText(default='epg', fixed_size=False)
	config.misc.epgcache_filename = ConfigText(default=(config.misc.epgcachepath.value + config.misc.epgcachefilename.value.replace('.dat', '') + '.dat'))

	def EpgCacheChanged(configElement):
		config.misc.epgcache_filename.setValue(os.path.join(config.misc.epgcachepath.value, config.misc.epgcachefilename.value.replace('.dat', '') + '.dat'))
		config.misc.epgcache_filename.save()
		eEPGCache.getInstance().setCacheFile(config.misc.epgcache_filename.value)
		epgcache = eEPGCache.getInstance()
		epgcache.save()
		if not config.misc.epgcache_filename.value.startswith("/etc/enigma2/"):
			if os.path.exists('/etc/enigma2/' + config.misc.epgcachefilename.value.replace('.dat', '') + '.dat'):
				os.remove('/etc/enigma2/' + config.misc.epgcachefilename.value.replace('.dat', '') + '.dat')

	config.misc.epgcachepath.addNotifier(EpgCacheChanged, immediate_feedback=False)
	config.misc.epgcachefilename.addNotifier(EpgCacheChanged, immediate_feedback=False)

	config.misc.showradiopic = ConfigYesNo(default=True)

	def setHDDStandby(configElement):
		for hdd in harddiskmanager.HDDList():
			hdd[1].setIdleTime(int(configElement.value))

	config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)

	if SystemInfo["12V_Output"]:
		def set12VOutput(configElement):
			Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
		config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)

	config.usage.keymap = ConfigText(default=eEnv.resolve("${datadir}/enigma2/keymap.xml"))

	config.network = ConfigSubsection()
	if SystemInfo["WakeOnLAN"]:
		def wakeOnLANChanged(configElement):
			if getBoxType() in ('et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbipbox'):
				open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
			else:
				open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")
		config.network.wol = ConfigYesNo(default=False)
		config.network.wol.addNotifier(wakeOnLANChanged)
	config.network.AFP_autostart = ConfigYesNo(default=True)
	config.network.NFS_autostart = ConfigYesNo(default=True)
	config.network.OpenVPN_autostart = ConfigYesNo(default=True)
	config.network.Samba_autostart = ConfigYesNo(default=True)
	config.network.Inadyn_autostart = ConfigYesNo(default=True)
	config.network.uShare_autostart = ConfigYesNo(default=True)

	config.softwareupdate = ConfigSubsection()
	config.softwareupdate.check = ConfigYesNo(default=True)
	config.softwareupdate.checktimer = ConfigSelection(choices=[
		("1", "hour"),
		("2", "2 hours"),
		("3", "3 hours"),
		("4", "4 hours"),
		("6", "6 hours"),
		("8", "8 hours"),
		("12", "12 hours"),
		("24", "24 hours"),
		("48", "2 days"),
	], default="1")
	config.softwareupdate.updatefound = NoSave(ConfigBoolean(default=False))
	config.softwareupdate.updatebeta = ConfigYesNo(default=True)
	config.softwareupdate.updateisunstable = ConfigInteger(default=0)

	config.timeshift = ConfigSubsection()
	choicelist = [("0", "Disabled")]
	for i in (2, 3, 4, 5, 10, 20, 30):
		choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300):
		m = i / 60
		choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
	config.timeshift.startdelay = ConfigSelection(default="10", choices=choicelist)
	config.timeshift.showinfobar = ConfigYesNo(default=True)
	config.timeshift.stopwhilerecording = ConfigYesNo(default=False)
	config.timeshift.favoriteSaveAction = ConfigSelection(default="askuser", choices=[("askuser", _("Ask user")), ("savetimeshift", _("Save and stop")), ("savetimeshiftandrecord", _("Save and record")), ("noSave", _("Don't save"))])
	config.timeshift.permanentrecording = ConfigYesNo(default=False)
	config.timeshift.isRecording = NoSave(ConfigYesNo(default=False))

	config.seek = ConfigSubsection()
	config.seek.autoskip = ConfigYesNo(default=True)
	config.seek.baractivation = ConfigSelection(default="leftright", choices=[("leftright", _("Long Left/Right")), ("ffrw", _("Long << / >>"))])
	config.seek.sensibility = ConfigSelection(default="10", choices=[
		("1", _("0.1%")), ("2", _("0.2%")), ("5", _("0.5%")),
		("10", _("1%")), ("20", _("2%")), ("50", _("5%")),
		("100", _("10%"))])
	config.seek.updown_skips = ConfigYesNo(default=True)
	config.seek.selfdefined_up = ConfigSelectionNumber(default=180, min=1, max=300, stepwidth=1, wraparound=True)
	config.seek.selfdefined_down = ConfigSelectionNumber(default=60, min=1, max=300, stepwidth=1, wraparound=True)
	config.seek.selfdefined_left = ConfigSelectionNumber(default=10, min=1, max=300, stepwidth=1, wraparound=True)
	config.seek.selfdefined_right = ConfigSelectionNumber(default=10, min=1, max=300, stepwidth=1, wraparound=True)
	config.seek.number_skips = ConfigYesNo(default=False)
	config.seek.selfdefined_13 = ConfigSelectionNumber(default=30, min=1, max=300, stepwidth=1, wraparound=True)
	config.seek.selfdefined_46 = ConfigSelectionNumber(default=180, min=5, max=1800, stepwidth=5, wraparound=True)
	config.seek.selfdefined_79 = ConfigSelectionNumber(default=300, min=10, max=3600, stepwidth=10, wraparound=True)

	config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])

	config.seek.enter_forward = ConfigSelection(default="2", choices=["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
	config.seek.enter_backward = ConfigSelection(default="1", choices=["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])

	def updateEnterForward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_forward, configElement.value)

	config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback=False)

	def updateEnterBackward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_backward, configElement.value)

	config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback=False)

	config.seek.on_pause = ConfigSelection(default="play", choices=[
		("play", _("Play")),
		("step", _("Single step (GOP)")),
		("last", _("Last speed"))])

	config.crash = ConfigSubsection()
	config.crash.details = ConfigYesNo(default=True)
	config.crash.enabledebug = ConfigYesNo(default=False)
	config.crash.debugloglimit = ConfigSelectionNumber(default=4, min=1, max=10, stepwidth=1, wraparound=True)
	config.crash.daysloglimit = ConfigSelectionNumber(default=8, min=1, max=30, stepwidth=1, wraparound=True)
	config.crash.sizeloglimit = ConfigSelectionNumber(default=10, min=1, max=20, stepwidth=1, wraparound=True)

	debugpath = [('/home/root/logs/', '/home/root/')]
	for p in harddiskmanager.getMountedPartitions():
		if os.path.exists(p.mountpoint):
			d = os.path.normpath(p.mountpoint)
			if p.mountpoint != '/':
				debugpath.append((p.mountpoint + 'logs/', d))
	config.crash.debug_path = ConfigSelection(default="/home/root/logs/", choices=debugpath)

	def updatedebug_path(configElement):
		if not os.path.exists(config.crash.debug_path.value):
			os.mkdir(config.crash.debug_path.value, 0755)

	config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback=False)

	config.usage.timerlist_finished_timer_position = ConfigSelection(default="end", choices=[("beginning", _("at beginning")), ("end", _("at end"))])

	def updateEraseSpeed(el):
		eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))

	def updateEraseFlags(el):
		eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))

	config.misc.erase_speed = ConfigSelection(default="100", choices=[
		("10", "10 MB/s"),
		("20", "20 MB/s"),
		("50", "50 MB/s"),
		("100", "100 MB/s")])
	config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback=False)
	config.misc.erase_flags = ConfigSelection(default="0", choices=[
		("0", _("Disable")),
		("1", _("Internal hdd only")),
		("3", _("Everywhere"))])
	config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback=False)

	if SystemInfo["ZapMode"]:
		def setZapmode(el):
			file = open(SystemInfo["ZapMode"], "w")
			file.write(el.value)
			file.close()
		config.misc.zapmode = ConfigSelection(default="mute", choices=[
			("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
		config.misc.zapmode.addNotifier(setZapmode, immediate_feedback=False)
	config.usage.historymode = ConfigSelection(default="1", choices=[("0", _("Just zap")), ("1", _("Show menu"))])

	config.subtitles = ConfigSubsection()
	config.subtitles.ttx_subtitle_colors = ConfigSelection(default="0", choices=[
		("0", _("original")),
		("1", _("white")),
		("2", _("yellow"))])
	config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default=False)
	config.subtitles.subtitle_position = ConfigSelection(default="50", choices=["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"])
	config.subtitles.subtitle_alignment = ConfigSelection(default="center", choices=[("left", _("left")), ("center", _("center")), ("right", _("right"))])
	config.subtitles.subtitle_rewrap = ConfigYesNo(default=False)
	config.subtitles.subtitle_borderwidth = ConfigSelection(default="3", choices=["1", "2", "3", "4", "5"])
	config.subtitles.subtitle_fontsize = ConfigSelection(choices=["%d" % x for x in range(16, 101) if not x % 2], default="38")

	subtitle_delay_choicelist = []
	for i in range(-900000, 1845000, 45000):
		if i == 0:
			subtitle_delay_choicelist.append(("0", _("No delay")))
		else:
			subtitle_delay_choicelist.append(("%d" % i, "%2.1f sec" % (i / 90000.)))
	config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default="0", choices=subtitle_delay_choicelist)

	config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default=False)
	config.subtitles.dvb_subtitles_original_position = ConfigSelection(default="0", choices=[("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
	config.subtitles.dvb_subtitles_centered = ConfigYesNo(default=True)
	config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default="0", choices=subtitle_delay_choicelist)
	config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default="0", choices=[
		("0", _("No transparency")),
		("25", "10%"),
		("50", "20%"),
		("75", "30%"),
		("100", "40%"),
		("125", "50%"),
		("150", "60%"),
		("175", "70%"),
		("200", "80%"),
		("225", "90%"),
		("255", _("Full transparency"))])
	config.subtitles.pango_subtitle_colors = ConfigSelection(default="1", choices=[
		("1", _("white")),
		("2", _("yellow"))])
	config.subtitles.pango_subtitles_delay = ConfigSelection(default="0", choices=subtitle_delay_choicelist)
	config.subtitles.pango_subtitles_fps = ConfigSelection(default="1", choices=[
		("1", _("Original")),
		("23976", _("23.976")),
		("24000", _("24")),
		("25000", _("25")),
		("29970", _("29.97")),
		("30000", _("30"))])
	config.subtitles.pango_autoturnon = ConfigYesNo(default=True)

	config.autolanguage = ConfigSubsection()
	audio_language_choices = [
		("---", _("None")),
		("und", _("Undetermined")),
		("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
		("ara", _("Arabic")),
		("eus baq", _("Basque")),
		("bul", _("Bulgarian")),
		("hrv", _("Croatian")),
		("ces cze", _("Czech")),
		("dan", _("Danish")),
		("dut ndl Dutch", _("Dutch")),
		("eng qaa Englisch", _("English")),
		("est", _("Estonian")),
		("fin", _("Finnish")),
		("fra fre", _("French")),
		("deu ger", _("German")),
		("ell gre", _("Greek")),
		("heb", _("Hebrew")),
		("hun", _("Hungarian")),
		("ita", _("Italian")),
		("lav", _("Latvian")),
		("lit", _("Lithuanian")),
		("ltz", _("Luxembourgish")),
		("nor", _("Norwegian")),
		("pol", _("Polish")),
		("por", _("Portuguese")),
		("fas per", _("Persian")),
		("ron rum", _("Romanian")),
		("rus", _("Russian")),
		("srp", _("Serbian")),
		("slk slo", _("Slovak")),
		("slv", _("Slovenian")),
		("spa", _("Spanish")),
		("swe", _("Swedish")),
		("tha", _("Thai")),
		("tur Audio_TUR", _("Turkish")),
		("ukr Ukr", _("Ukrainian"))]

	def setEpgLanguage(configElement):
		eServiceEvent.setEPGLanguage(configElement.value)

	config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices[2:], default="---")
	config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)

	def setEpgLanguageAlternative(configElement):
		eServiceEvent.setEPGLanguageAlternative(configElement.value)

	config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices[2:], default="---")
	config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)

	config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_defaultac3 = ConfigYesNo(default=True)
	config.autolanguage.audio_defaultddp = ConfigYesNo(default=False)
	config.autolanguage.audio_usecache = ConfigYesNo(default=True)

	subtitle_language_choices = audio_language_choices[:1] + audio_language_choices[2:]
	config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default=False)
	config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default=False)
	config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default=False)
	config.autolanguage.subtitle_usecache = ConfigYesNo(default=True)
	config.autolanguage.equal_languages = ConfigSelection(default="15", choices=[
		("0", _("None")), ("1", "1"), ("2", "2"), ("3", "1,2"),
		("4", "3"), ("5", "1,3"), ("6", "2,3"), ("7", "1,2,3"),
		("8", "4"), ("9", "1,4"), ("10", "2,4"), ("11", "1,2,4"),
		("12", "3,4"), ("13", "1,3,4"), ("14", "2,3,4"), ("15", _("All"))])

	config.logmanager = ConfigSubsection()
	config.logmanager.showinextensions = ConfigYesNo(default=False)
	config.logmanager.user = ConfigText(default='', fixed_size=False)
	config.logmanager.useremail = ConfigText(default='', fixed_size=False)
	config.logmanager.usersendcopy = ConfigYesNo(default=True)
	config.logmanager.path = ConfigText(default="/")
	config.logmanager.additionalinfo = NoSave(ConfigText(default=""))
	config.logmanager.sentfiles = ConfigLocations(default='')

	config.vixsettings = ConfigSubsection()
	config.vixsettings.Subservice = ConfigYesNo(default=True)
	config.vixsettings.ColouredButtons = ConfigYesNo(default=False)
	config.vixsettings.InfoBarEpg_mode = ConfigSelection(default="0", choices=[
		("0", _("as plugin in extended bar")),
		("1", _("with long OK press")),
		("2", _("with exit button")),
		("3", _("with left/right buttons"))])

	config.epgselection = ConfigSubsection()
	config.epgselection.sort = ConfigSelection(default="0", choices=[("0", _("Time")), ("1", _("Alphanumeric"))])
	config.epgselection.overjump = ConfigYesNo(default=False)
	config.epgselection.infobar_type_mode = ConfigSelection(default="graphics", choices=[("graphics", _("Multi EPG")), ("single", _("Single EPG"))])
	if SystemInfo.get("NumVideoDecoders", 1) > 1:
		config.epgselection.infobar_preview_mode = ConfigSelection(default="1", choices=[("0", _("Disabled")), ("1", _("Full screen")), ("2", _("PiP"))])
	else:
		config.epgselection.infobar_preview_mode = ConfigSelection(default="1", choices=[("0", _("Disabled")), ("1", _("Full screen"))])
	config.epgselection.infobar_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.infobar_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.infobar_itemsperpage = ConfigSelectionNumber(default=2, stepwidth=1, min=1, max=4, wraparound=True)
	if SystemInfo.get("NumVideoDecoders", 1) > 1:
		if HardwareInfo().is_nextgen():
			previewdefault = "2"
		else:
			previewdefault = "1"
		config.epgselection.infobar_preview_mode = ConfigSelection(default=previewdefault, choices=[("0", _("Disabled")), ("1", _("Full screen")), ("2", _("PiP"))])
	else:
		config.epgselection.infobar_preview_mode = ConfigSelection(default="1", choices=[("0", _("Disabled")), ("1", _("Full screen"))])
	config.epgselection.infobar_roundto = ConfigSelection(default="15", choices=[("15", _("%d minutes") % 15), ("30", _("%d minutes") % 30), ("60", _("%d minutes") % 60)])
	config.epgselection.infobar_prevtime = ConfigClock(default=time())
	config.epgselection.infobar_prevtimeperiod = ConfigSelection(default="180", choices=[("60", _("%d minutes") % 60), ("90", _("%d minutes") % 90), ("120", _("%d minutes") % 120), ("150", _("%d minutes") % 150), ("180", _("%d minutes") % 180), ("210", _("%d minutes") % 210), ("240", _("%d minutes") % 240), ("270", _("%d minutes") % 270), ("300", _("%d minutes") % 300)])
	config.epgselection.infobar_primetimehour = ConfigSelectionNumber(default=20, stepwidth=1, min=00, max=23, wraparound=True)
	config.epgselection.infobar_primetimemins = ConfigSelectionNumber(default=00, stepwidth=1, min=00, max=59, wraparound=True)
	config.epgselection.infobar_servicetitle_mode = ConfigSelection(default="picon+servicename", choices=[("servicename", _("Service Name")), ("picon", _("Picon")), ("picon+servicename", _("Picon and Service Name"))])
	config.epgselection.infobar_servfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.infobar_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.infobar_timelinefs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.infobar_timeline24h = ConfigYesNo(default=True)
	config.epgselection.infobar_servicewidth = ConfigSelectionNumber(default=200, stepwidth=1, min=70, max=500, wraparound=True)
	config.epgselection.infobar_piconwidth = ConfigSelectionNumber(default=100, stepwidth=1, min=70, max=500, wraparound=True)
	config.epgselection.infobar_infowidth = ConfigSelectionNumber(default=50, stepwidth=25, min=0, max=150, wraparound=True)
	config.epgselection.enhanced_preview_mode = ConfigYesNo(default=True)
	config.epgselection.enhanced_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.enhanced_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.enhanced_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.enhanced_itemsperpage = ConfigSelectionNumber(default=18, stepwidth=1, min=12, max=40, wraparound=True)
	config.epgselection.multi_showbouquet = ConfigYesNo(default=False)
	config.epgselection.multi_preview_mode = ConfigYesNo(default=True)
	config.epgselection.multi_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.multi_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.multi_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.multi_itemsperpage = ConfigSelectionNumber(default=18, stepwidth=1, min=12, max=40, wraparound=True)
	config.epgselection.graph_showbouquet = ConfigYesNo(default=False)
	config.epgselection.graph_preview_mode = ConfigYesNo(default=True)
	config.epgselection.graph_type_mode = ConfigSelection(default="graphics", choices=[("graphics", _("Graphics")), ("text", _("Text"))])
	config.epgselection.graph_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.graph_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
	config.epgselection.graph_info = ConfigSelection(default="Channel Info", choices=[("Channel Info", _("Channel Info")), ("Single EPG", _("Single EPG"))])
	config.epgselection.graph_infolong = ConfigSelection(default="Single EPG", choices=[("Channel Info", _("Channel Info")), ("Single EPG", _("Single EPG"))])
	config.epgselection.graph_roundto = ConfigSelection(default="15", choices=[("15", _("%d minutes") % 15), ("30", _("%d minutes") % 30), ("60", _("%d minutes") % 60)])
	config.epgselection.graph_prevtime = ConfigClock(default=time())
	config.epgselection.graph_prevtimeperiod = ConfigSelection(default="180", choices=[("60", _("%d minutes") % 60), ("90", _("%d minutes") % 90), ("120", _("%d minutes") % 120), ("150", _("%d minutes") % 150), ("180", _("%d minutes") % 180), ("210", _("%d minutes") % 210), ("240", _("%d minutes") % 240), ("270", _("%d minutes") % 270), ("300", _("%d minutes") % 300)])
	config.epgselection.graph_primetimehour = ConfigSelectionNumber(default=20, stepwidth=1, min=00, max=23, wraparound=True)
	config.epgselection.graph_primetimemins = ConfigSelectionNumber(default=00, stepwidth=1, min=00, max=59, wraparound=True)
	config.epgselection.graph_servicetitle_mode = ConfigSelection(default="picon+servicename", choices=[("servicename", _("Service Name")), ("picon", _("Picon")), ("picon+servicename", _("Picon and Service Name"))])
	config.epgselection.graph_channel1 = ConfigYesNo(default=False)
	config.epgselection.graph_servfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.graph_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.graph_timelinefs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
	config.epgselection.graph_timeline24h = ConfigYesNo(default=True)
	config.epgselection.graph_itemsperpage = ConfigSelectionNumber(default=8, stepwidth=1, min=3, max=20, wraparound=True)
	config.epgselection.graph_pig = ConfigYesNo(default=True)
	config.epgselection.graph_heightswitch = NoSave(ConfigYesNo(default=False))
	config.epgselection.graph_servicewidth = ConfigSelectionNumber(default=250, stepwidth=1, min=70, max=500, wraparound=True)
	config.epgselection.graph_piconwidth = ConfigSelectionNumber(default=100, stepwidth=1, min=70, max=500, wraparound=True)
	config.epgselection.graph_infowidth = ConfigSelectionNumber(default=50, stepwidth=25, min=0, max=150, wraparound=True)

	if not os.path.exists('/usr/emu_scripts/'):
		os.mkdir('/usr/emu_scripts/', 0755)
	softcams = os.listdir('/usr/emu_scripts/')
	config.oscaminfo = ConfigSubsection()
	config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
	config.oscaminfo.userdatafromconf = ConfigYesNo(default=False)
	config.oscaminfo.autoupdate = ConfigYesNo(default=False)
	config.oscaminfo.username = ConfigText(default="username", fixed_size=False, visible_width=12)
	config.oscaminfo.password = ConfigPassword(default="password", fixed_size=False)
	config.oscaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True)
	config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536))
	config.oscaminfo.intervall = ConfigSelectionNumber(default=10, min=1, max=600, stepwidth=1, wraparound=True)
	SystemInfo["OScamInstalled"] = False

	config.cccaminfo = ConfigSubsection()
	config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
	config.cccaminfo.serverNameLength = ConfigSelectionNumber(default=22, min=10, max=100, stepwidth=1, wraparound=True)
	config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
	config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
	config.cccaminfo.username = ConfigText(default="", fixed_size=False)
	config.cccaminfo.password = ConfigText(default="", fixed_size=False)
	config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
	config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
	config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
	config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(default=5, min=1, max=10, stepwidth=1, wraparound=True)
	config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
	config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
	config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
	config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
	config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)
	SystemInfo["CCcamInstalled"] = False
	for softcam in softcams:
		if softcam.lower().startswith('cccam'):
			config.cccaminfo.showInExtensions = ConfigYesNo(default=True)
			SystemInfo["CCcamInstalled"] = True
		elif softcam.lower().startswith('oscam'):
			config.oscaminfo.showInExtensions = ConfigYesNo(default=True)
			SystemInfo["OScamInstalled"] = True

	config.streaming = ConfigSubsection()
	config.streaming.stream_ecm = ConfigYesNo(default=False)
	config.streaming.descramble = ConfigYesNo(default=True)
	config.streaming.stream_eit = ConfigYesNo(default=True)
	config.streaming.stream_ait = ConfigYesNo(default=True)
	config.streaming.authentication = ConfigYesNo(default=False)

	config.pluginbrowser = ConfigSubsection()
	config.pluginbrowser.po = ConfigYesNo(default=False)
	config.pluginbrowser.src = ConfigYesNo(default=False)
Ejemplo n.º 5
0
def InitUsageConfig():
	config.usage = ConfigSubsection()
	#config.usage.mainmenu_mode = ConfigSelection(default = "horz", choices = [("horz", _("Horizontal")), ("vert", _("Vertical"))]) 
        config.usage.mainmenu_mode = ConfigSelection(default = "horzanim", choices = [("horzanim", _("Horizontal-animated")), ("horzicon", _("Horizontal-icons")), ("vert", _("Vertical-menu"))])
        config.usage.showdish = ConfigYesNo(default = True)
	config.usage.multibouquet = ConfigYesNo(default = True)

	config.usage.alternative_number_mode = ConfigYesNo(default = False)
	def alternativeNumberModeChange(configElement):
		eDVBDB.getInstance().setNumberingMode(configElement.value)
		refreshServiceList()
	config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)

	config.usage.hide_number_markers = ConfigYesNo(default = True)
	config.usage.hide_number_markers.addNotifier(refreshServiceList)

	config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
	config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
	config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
	config.usage.record_indicator_mode.addNotifier(refreshServiceList)

	choicelist = [("-1", _("Devide")), ("0", _("Disable"))]
	for i in range(100,1850,50):
		choicelist.append(("%d" % i, ngettext("%d pixel wide", "%d pixels wide", i) % i))
	config.usage.servicelist_column = ConfigSelection(default="0", choices=choicelist)
	config.usage.servicelist_column.addNotifier(refreshServiceList)

	config.usage.service_icon_enable = ConfigYesNo(default = False)
	config.usage.service_icon_enable.addNotifier(refreshServiceList)
	config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [
		("standard", _("Standard")),
		("keep", _("Keep service")),
		("reverseB", _("Reverse bouquet buttons")),
		("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])

	config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)

	config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
	config.usage.e1like_radio_mode = ConfigYesNo(default = True)
	choicelist = [("0", _("No timeout"))]
	for i in range(1, 12):
		choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
	config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
	config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
	config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
	config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
	config.usage.show_second_infobar = ConfigSelection(default = None, choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))])	
	config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
	config.usage.oldstyle_zap_controls = ConfigYesNo(default = False)
	config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False)
	config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
	config.usage.ok_is_channelselection = ConfigYesNo(default = False)
	config.usage.show_spinner = ConfigYesNo(default = True)
	config.usage.enable_tt_caching = ConfigYesNo(default = True)
	choicelist = []
	for i in (10, 30):
		choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300, 600, 1200, 1800):
		m = i / 60
		choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
	for i in (3600, 7200, 14400):
		h = i / 3600
		choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h))
	config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
	config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
		("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])

	config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
		("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
		("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])
	config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
		("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
	choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
	for i in [60, 300, 600, 900, 1800, 2700, 3600]:
		m = i/60
		choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
	config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)

	config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD))
	config.usage.timer_path = ConfigText(default = "<default>")
	config.usage.instantrec_path = ConfigText(default = "<default>")
	config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
	config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])

	config.cccaminfo = ConfigSubsection()
	config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
	config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True)
	config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
	config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
	config.cccaminfo.username = ConfigText(default="", fixed_size=False)
	config.cccaminfo.password = ConfigText(default="", fixed_size=False)
	config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
	config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
	config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
	config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True)
	config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
	config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
	config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
	config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
	config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)

	config.oscaminfo = ConfigSubsection()
	config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
	config.oscaminfo.userdatafromconf = ConfigYesNo(default = False)
	config.oscaminfo.autoupdate = ConfigYesNo(default = False)
	config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12)
	config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False)
	config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True)
	config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) )
	config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True)
	SystemInfo["OScamInstalled"] = False

	config.usage.movielist_trashcan = ConfigYesNo(default=True)
	config.usage.movielist_trashcan_days = ConfigNumber(default=8)
	config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
	config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
		("ask", _("Ask user")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning")) ])
	config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
		("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
	config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
		("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
		("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat")), ("playallvideos", _("Play All Videos (without infos)"))])
	config.usage.next_movie_msg = ConfigYesNo(default = True)
	config.usage.last_movie_played = ConfigText()
	config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
		("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])

	config.usage.setup_level = ConfigSelection(default = "expert", choices = [
		("simple", _("Simple")),
		("intermediate", _("Intermediate")),
		("expert", _("Expert")) ])

	config.usage.startup_to_standby = ConfigYesNo(default = False)

	config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [
		("show_menu", _("Show shutdown menu")),
		("shutdown", _("Immediate shutdown")),
		("standby", _("Standby")) ] )

	config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [
		("show_menu", _("Show shutdown menu")),
		("shutdown", _("Immediate shutdown")),
		("standby", _("Standby")) ] )

	choicelist = [("0", _("Do nothing"))]
	for i in range(3600, 21601, 3600):
		h = abs(i / 3600)
		h = ngettext("%d hour", "%d hours", h) % h
		choicelist.append(("%d" % i, _("Standby in ") + h))
	config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
	config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
	config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))

	choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
	for i in range(900, 7201, 900):
		m = abs(i / 60)
		m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append(("%d" % i, _("Standby in ") + m))
	config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)

	choicelist = [("0", _("Disabled"))]
	for i in [60, 300, 600] + range(900, 7201, 900):
		m = abs(i / 60)
		m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append(("%d" % i, _("after ") + m))
	config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
	config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = True)
	config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
	config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))

	choicelist = [("0", _("Disabled"))]
	for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600):
		if i < 60:
			m = ngettext("%d second", "%d seconds", i) % i
		else:
			m = abs(i / 60)
			m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append(("%d" % i, m))
	config.usage.screen_saver = ConfigSelection(default = "60", choices = choicelist)

	config.usage.check_timeshift = ConfigYesNo(default = True)

	choicelist = [("0", _("Disabled"))]
	for i in (2, 3, 4, 5, 10, 20, 30):
		choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300):
		m = i / 60
		choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
	config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)

	config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [
		("0", "DVB-S/-C/-T"),
		("1", "DVB-S/-T/-C"),
		("2", "DVB-C/-S/-T"),
		("3", "DVB-C/-T/-S"),
		("4", "DVB-T/-C/-S"),
		("5", "DVB-T/-S/-C") ])

	nims = [("-1", _("auto"))]
	for x in nimmanager.nim_slots:
		nims.append((str(x.slot), x.getSlotName()))
	config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
	nims.insert(0,("-2", _("Disabled")))
	config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
	config.misc.disable_background_scan = ConfigYesNo(default = False)

	config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [
		('barleft', _("Progress bar left")),
		('barright', _("Progress bar right")),
		('percleft', _("Percentage left")),
		('percright', _("Percentage right")),
		('no', _("No")) ])
	config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
	config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
	config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)

	config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)

	config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)

	config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
	config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
		('o', _("Off")),
		('p', _("Progress")),
		('s', _("Small progress")),
		('i', _("Icons")),
	])
	config.usage.movielist_unseen = ConfigYesNo(default = False)

	config.usage.swap_snr_on_osd = ConfigYesNo(default = False)
        config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
	config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False)
	config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
	config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
	config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False)
	
	def SpinnerOnOffChanged(configElement):
		setSpinnerOnOff(int(configElement.value))
	config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)

	def EnableTtCachingChanged(configElement):
		setEnableTtCachingOnOff(int(configElement.value))
	config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)

	def TunerTypePriorityOrderChanged(configElement):
		setTunerTypePriorityOrder(int(configElement.value))
	config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)

	def PreferredTunerChanged(configElement):
		setPreferredTuner(int(configElement.value))
	config.usage.frontend_priority.addNotifier(PreferredTunerChanged)

	config.usage.hide_zap_errors = ConfigYesNo(default = False)
	config.usage.hide_ci_messages = ConfigYesNo(default = True)
	config.usage.show_cryptoinfo = ConfigYesNo(default = True)
	config.usage.show_eit_nownext = ConfigYesNo(default = True)
	config.usage.show_vcr_scart = ConfigYesNo(default = False)

	if SystemInfo["StandbyLED"]:
		def standbyLEDChanged(configElement):
			open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
		config.usage.standbyLED = ConfigYesNo(default = True)
		config.usage.standbyLED.addNotifier(standbyLEDChanged)

	if SystemInfo["WakeOnLAN"]:
		def wakeOnLANChanged(configElement):
			open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
		config.usage.wakeOnLAN = ConfigYesNo(default = False)
		config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged)

	config.epg = ConfigSubsection()
	config.epg.eit = ConfigYesNo(default = True)
	config.epg.mhw = ConfigYesNo(default = False)
	config.epg.freesat = ConfigYesNo(default = True)
	config.epg.viasat = ConfigYesNo(default = True)
	config.epg.netmed = ConfigYesNo(default = True)
	config.epg.virgin = ConfigYesNo(default = False)
	config.misc.showradiopic = ConfigYesNo(default = True)
	def EpgSettingsChanged(configElement):
		from enigma import eEPGCache
		mask = 0xffffffff
		if not config.epg.eit.value:
			mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
		if not config.epg.mhw.value:
			mask &= ~eEPGCache.MHW
		if not config.epg.freesat.value:
			mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
		if not config.epg.viasat.value:
			mask &= ~eEPGCache.VIASAT
		if not config.epg.netmed.value:
			mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
		if not config.epg.virgin.value:
			mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
		eEPGCache.getInstance().setEpgSources(mask)
	config.epg.eit.addNotifier(EpgSettingsChanged)
	config.epg.mhw.addNotifier(EpgSettingsChanged)
	config.epg.freesat.addNotifier(EpgSettingsChanged)
	config.epg.viasat.addNotifier(EpgSettingsChanged)
	config.epg.netmed.addNotifier(EpgSettingsChanged)
	config.epg.virgin.addNotifier(EpgSettingsChanged)

	config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
	def EpgHistorySecondsChanged(configElement):
		from enigma import eEPGCache
		eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
	config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)

	def setHDDStandby(configElement):
		for hdd in harddiskmanager.HDDList():
			hdd[1].setIdleTime(int(configElement.value))
	config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)

	if SystemInfo["12V_Output"]:
		def set12VOutput(configElement):
			Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
		config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)

	config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))

	config.seek = ConfigSubsection()
	config.seek.selfdefined_13 = ConfigNumber(default=15)
	config.seek.selfdefined_46 = ConfigNumber(default=60)
	config.seek.selfdefined_79 = ConfigNumber(default=300)

	config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])

	config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
	config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])

	config.seek.on_pause = ConfigSelection(default = "play", choices = [
		("play", _("Play")),
		("step", _("Single step (GOP)")),
		("last", _("Last speed")) ])


	config.crash = ConfigSubsection()
	config.crash.details = ConfigYesNo(default = False)
	config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])

	def updateEnterForward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_forward, configElement.value)

	config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)

	def updateEnterBackward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_backward, configElement.value)

	config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)

	def updateEraseSpeed(el):
		eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
	def updateEraseFlags(el):
		eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
	config.misc.erase_speed = ConfigSelection(default="20", choices = [
		("10", "10 MB/s"),
		("20", "20 MB/s"),
		("50", "50 MB/s"),
		("100", "100 MB/s")])
	config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
	config.misc.erase_flags = ConfigSelection(default="1", choices = [
		("0", _("Disable")),
		("1", _("Internal hdd only")),
		("3", _("Everywhere"))])
	config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)

	if SystemInfo["ZapMode"]:
		def setZapmode(el):
			open(SystemInfo["ZapMode"], "w").write(el.value)
		config.misc.zapmode = ConfigSelection(default = "mute", choices = [
			("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
		config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)

	config.subtitles = ConfigSubsection()
	config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
		("0", _("original")),
		("1", _("white")),
		("2", _("yellow")) ])
	config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
	config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
	config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
	config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
	config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
	config.subtitles.subtitle_fontsize  = ConfigSelection(choices = ["16", "18", "20", "22", "24", "26", "28", "30", "32", "34", "36", "38", "40", "42", "44", "46", "48", "50", "52", "54"], default = "34")

	subtitle_delay_choicelist = []
	for i in range(-900000, 1845000, 45000):
		if i == 0:
			subtitle_delay_choicelist.append(("0", _("No delay")))
		else:
			subtitle_delay_choicelist.append(("%d" % i, "%2.1f sec" % (i / 90000.)))
	config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)

	config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
	config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
	config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = True)
	config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
	config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
		("0", _("No transparency")),
		("25", "10%"),
		("50", "20%"),
		("75", "30%"),
		("100", "40%"),
		("125", "50%"),
		("150", "60%"),
		("175", "70%"),
		("200", "80%"),
		("225", "90%"),
		("255", _("Full transparency"))])
	config.subtitles.pango_subtitle_colors = ConfigSelection(default = "0", choices = [
		("0", _("alternative")),
		("1", _("white")),
		("2", _("yellow")) ])
	config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
	config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
		("1", _("Original")),
		("23976", _("23.976")),
		("24000", _("24")),
		("25000", _("25")),
		("29970", _("29.97")),
		("30000", _("30"))])
	config.subtitles.pango_autoturnon = ConfigYesNo(default = True)

	config.autolanguage = ConfigSubsection()
	audio_language_choices=[
		("---", _("None")),
		("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
		("ara", _("Arabic")),
		("eus baq", _("Basque")),
		("bul", _("Bulgarian")),
		("hrv", _("Croatian")),
		("ces cze", _("Czech")),
		("dan", _("Danish")),
		("dut ndl", _("Dutch")),
		("eng qaa", _("English")),
		("est", _("Estonian")),
		("fin", _("Finnish")),
		("fra fre", _("French")),
		("deu ger", _("German")),
		("ell gre", _("Greek")),
		("heb", _("Hebrew")),
		("hun", _("Hungarian")),
		("ita", _("Italian")),
		("lav", _("Latvian")),
		("lit", _("Lithuanian")),
		("ltz", _("Luxembourgish")),
		("nor", _("Norwegian")),
		("pol", _("Polish")),
		("por", _("Portuguese")),
		("fas per", _("Persian")),
		("ron rum", _("Romanian")),
		("rus", _("Russian")),
		("srp", _("Serbian")),
		("slk slo", _("Slovak")),
		("slv", _("Slovenian")),
		("spa", _("Spanish")),
		("swe", _("Swedish")),
		("tha", _("Thai")),
		("tur Audio_TUR", _("Turkish"))]

	def setEpgLanguage(configElement):
		eServiceEvent.setEPGLanguage(configElement.value)
	config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
	config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)

	def setEpgLanguageAlternative(configElement):
		eServiceEvent.setEPGLanguageAlternative(configElement.value)
	config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
	config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)

	config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
	config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False)
	config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
	config.autolanguage.audio_usecache = ConfigYesNo(default = True)

	subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
	config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
	config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
	config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
	config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
	config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)
	config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [
		("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"),
		("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"),
		("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"),
		("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))])

	config.streaming = ConfigSubsection()
	config.streaming.stream_ecm = ConfigYesNo(default = False)
	config.streaming.descramble = ConfigYesNo(default = True)
	config.streaming.stream_eit = ConfigYesNo(default = True)
	config.streaming.stream_ait = ConfigYesNo(default = True)
	config.streaming.authentication = ConfigYesNo(default = False)

	SystemInfo["GraphMultiEpg"] = os.path.exists("/usr/lib/enigma2/python/Plugins/Extensions/GraphMultiEPG")
	if SystemInfo["GraphMultiEpg"]:
		config.misc.graph_mepg = ConfigSubsection()
		config.misc.graph_mepg.extension_menu = ConfigYesNo(default = True)
Ejemplo n.º 6
0
def InitUsageConfig():
	config.usage = ConfigSubsection()
	config.usage.subnetwork = ConfigYesNo(default = True)
	config.usage.subnetwork_cable = ConfigYesNo(default = True)
	config.usage.subnetwork_terrestrial = ConfigYesNo(default = True)
	config.usage.showdish = ConfigYesNo(default = True)
	config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))])
	config.usage.multibouquet = ConfigYesNo(default = True)

	config.usage.alternative_number_mode = ConfigYesNo(default = False)
	def alternativeNumberModeChange(configElement):
		eDVBDB.getInstance().setNumberingMode(configElement.value)
		refreshServiceList()
	config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)

	config.usage.hide_number_markers = ConfigYesNo(default = True)
	config.usage.hide_number_markers.addNotifier(refreshServiceList)

	config.usage.servicetype_icon_mode = ConfigSelection(default = "1", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
	config.usage.crypto_icon_mode = ConfigSelection(default = "2", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
	config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
	config.usage.record_indicator_mode = ConfigSelection(default = "3", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
	config.usage.record_indicator_mode.addNotifier(refreshServiceList)

	choicelist = [("-1", _("Disable"))]
	for i in range(0,1300,100):
		choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i))
	config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
	config.usage.servicelist_column.addNotifier(refreshServiceList)

	config.usage.service_icon_enable = ConfigYesNo(default = True)
	config.usage.service_icon_enable.addNotifier(refreshServiceList)
	config.usage.servicelist_cursor_behavior = ConfigSelection(default = "keep", choices = [
		("standard", _("Standard")),
		("keep", _("Keep service")),
		("reverseB", _("Reverse bouquet buttons")),
		("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])

	choicelist = [("by skin", _("As defined by the skin"))]
	for i in range (5,41):
		choicelist.append((str(i)))
	config.usage.servicelist_number_of_services = ConfigSelection(default = "by skin", choices = choicelist)
	config.usage.servicelist_number_of_services.addNotifier(refreshServiceList)

	config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)

	config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
	config.usage.e1like_radio_mode = ConfigYesNo(default = False)
	choicelist = [("0", _("No timeout"))]
	for i in range(1, 12):
		choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
	config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
	config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
	config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
	config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
	config.usage.show_second_infobar = ConfigSelection(default = "0", choices = [("", _("None"))] + choicelist + [("EPG",_("EPG"))])
	config.usage.show_simple_second_infobar = ConfigYesNo(default = False)
	config.usage.infobar_frontend_source = ConfigSelection(default = "settings", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
	config.usage.oldstyle_zap_controls = ConfigYesNo(default = False)
	config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False)
	config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
	config.usage.ok_is_channelselection = ConfigYesNo(default = False)
	config.usage.volume_instead_of_channelselection = ConfigYesNo(default = False)
	config.usage.channelselection_preview = ConfigYesNo(default = False)
	config.usage.show_spinner = ConfigYesNo(default = True)
	config.usage.menu_sort_weight = ConfigDictionarySet(default = { "mainmenu" : {"submenu" : {} }})
	config.usage.menu_sort_mode = ConfigSelection(default = "default", choices = [
		("a_z", _("alphabetical")),
		("default", _("Default")),
		("user", _("user defined")),])
	config.usage.menu_show_numbers = ConfigSelection(default = "no", choices = [("no", _("no")), ("menu&plugins", _("in menu and plugins")), ("menu", _("in menu only")), ("plugins", _("in plugins only"))])
	config.usage.menu_path = ConfigSelection(default = "off", choices = [
		("off", _("Disabled")),
		("small", _("Small")),
		("large", _("Large")),])
	config.usage.enable_tt_caching = ConfigYesNo(default = True)
	config.usage.sort_settings = ConfigYesNo(default=False)
	choicelist = []
	for i in (10, 30):
		choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300, 600, 1200, 1800):
		m = i / 60
		choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
	for i in (3600, 7200, 14400):
		h = i / 3600
		choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h))
	config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
	config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
		("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])

	config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
		("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
		("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])
	config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
		("no", _("no")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
	choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
	for i in [60, 300, 600, 900, 1800, 2700, 3600]:
		m = i/60
		choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
	config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)

	config.usage.default_path = ConfigText(default = "")
	config.usage.timer_path = ConfigText(default = "<default>")
	config.usage.instantrec_path = ConfigText(default = "<default>")
	config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
	config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])

	config.usage.movielist_trashcan = ConfigYesNo(default=True)
	config.usage.movielist_trashcan_days = ConfigNumber(default=7)
	config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
	config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
		("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")),
		("ask no", _("Ask user") + " " + _("default") + " " + _("no")),
		("resume", _("Resume from last position")),
		("beginning", _("Start from the beginning"))])
	config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
		("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
	config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
		("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
		("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))])
	config.usage.next_movie_msg = ConfigYesNo(default = True)
	config.usage.last_movie_played = ConfigText()
	config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
		("no", _("no")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ])

	config.usage.setup_level = ConfigSelection(default = "expert", choices = [
		("simple", _("Normal")),
		("intermediate", _("Advanced")),
		("expert", _("Expert")) ])

	config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [
		("no", _("no")),
		("yes", _("yes")),
		("except", _("No, except Wakeup timer")) ])

	config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [
		("no", _("no")),
		("yes", _("yes")),
		("standby", _("Yes, only from standby")),
		("deepstandby", _("Yes, only from deep standby")) ])
	config.usage.wakeup_day = ConfigSubDict()
	config.usage.wakeup_time = ConfigSubDict()
	for i in range(7):
		config.usage.wakeup_day[i] = ConfigEnableDisable(default = False)
		config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60))

	choicelist = [("0", _("Do nothing"))]
	for i in range(3600, 21601, 3600):
		h = abs(i / 3600)
		h = ngettext("%d hour", "%d hours", h) % h
		choicelist.append((str(i), _("Standby in ") + h))
	config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
	config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
	config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False)
	config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
	config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False)
	config.usage.inactivity_timer_blocktime_day = ConfigSubDict()
	config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict()
	config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict()
	config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict()
	config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict()
	config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict()
	for i in range(7):
		config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False)
		config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
		config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
		config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False)
		config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
		config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))

	choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
	for i in range(900, 7201, 900):
		m = abs(i / 60)
		m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append((str(i), _("Standby in ") + m))
	config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)

	choicelist = [("0", _("Disabled"))]
	for i in [300, 600] + range(900, 7201, 900):
		m = abs(i / 60)
		m = ngettext("%d minute", "%d minutes", m) % m
		choicelist.append((str(i), _("after ") + m))
	config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
	config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False)
	config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
	config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))

	choicelist = [("0", _("Disabled"))]
	for m in (1, 5, 10, 15, 30, 60):
		choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m))
	config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist)

	config.usage.check_timeshift = ConfigYesNo(default = True)

	choicelist = [("0", _("Disabled"))]
	for i in (2, 3, 4, 5, 10, 20, 30):
		choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
	for i in (60, 120, 300):
		m = i / 60
		choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
	config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)

	config.usage.alternatives_priority = ConfigSelection(default = "1", choices = [
		("0", "DVB-S/-C/-T"),
		("1", "DVB-S/-T/-C"),
		("2", "DVB-C/-S/-T"),
		("3", "DVB-C/-T/-S"),
		("4", "DVB-T/-C/-S"),
		("5", "DVB-T/-S/-C"),
		("127", _("No priority")) ])

	def remote_fallback_changed(configElement):
		if configElement.value:
			configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value)
			configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "")
	config.usage.remote_fallback_enabled = ConfigYesNo(default = False)
	config.usage.remote_fallback = ConfigText(default = "", fixed_size = False)
	config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False)
	config.usage.remote_fallback_import_url = ConfigText(default = "", fixed_size = False)
	config.usage.remote_fallback_import_url.addNotifier(remote_fallback_changed, immediate_feedback=False)
	config.usage.remote_fallback_import = ConfigSelection(default = "", choices = [("", _("No")), ("channels", _("Channels only")), ("channels_epg", _("Channels and EPG")), ("epg", _("EPG only"))])
	config.usage.remote_fallback_import_restart = ConfigYesNo(default = False)
	config.usage.remote_fallback_import_standby = ConfigYesNo(default = False)
	config.usage.remote_fallback_ok = ConfigYesNo(default = False)
	config.usage.remote_fallback_nok = ConfigYesNo(default = False)
	config.usage.remote_fallback_extension_menu = ConfigYesNo(default = False)
	config.usage.remote_fallback_external_timer = ConfigYesNo(default = False)
	config.usage.remote_fallback_openwebif_customize = ConfigYesNo(default = False)
	config.usage.remote_fallback_openwebif_userid = ConfigText(default = "root")
	config.usage.remote_fallback_openwebif_password = ConfigPassword(default = "default")
	config.usage.remote_fallback_openwebif_port = ConfigInteger(default=80, limits=(0,65535))

	config.usage.show_timer_conflict_warning = ConfigYesNo(default = True)

	dvbs_nims = [("-2", _("Disabled"))]
	dvbt_nims = [("-2", _("Disabled"))]
	dvbc_nims = [("-2", _("Disabled"))]
	atsc_nims = [("-2", _("Disabled"))]

	nims = [("-1", _("auto"))]
	for x in nimmanager.nim_slots:
		if x.isCompatible("DVB-S"):
			dvbs_nims.append((str(x.slot), x.getSlotName()))
		elif x.isCompatible("DVB-T"):
			dvbt_nims.append((str(x.slot), x.getSlotName()))
		elif x.isCompatible("DVB-C"):
			dvbc_nims.append((str(x.slot), x.getSlotName()))
		elif x.isCompatible("ATSC"):
			atsc_nims.append((str(x.slot), x.getSlotName()))
		nims.append((str(x.slot), x.getSlotName()))

	config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
	nims.insert(0,("-2", _("Disabled")))
	config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
	config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims))
	dvbs_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims)
	config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims))
	dvbt_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims)
	config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims))
	dvbc_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims)
	config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims))
	atsc_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims)

	SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims))
	SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims))
	SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims))
	SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims))

	config.misc.disable_background_scan = ConfigYesNo(default = False)
	config.misc.use_ci_assignment = ConfigYesNo(default = False)
	config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'percright', choices = [
		('barleft', _("Progress bar left")),
		('barright', _("Progress bar right")),
		('percleft', _("Percentage left")),
		('percright', _("Percentage right")),
		('no', _("no")) ])
	config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
	config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
	config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)

	config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)

	config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)

	config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
	config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
		('o', _("Off")),
		('p', _("Progress")),
		('s', _("Small progress")),
		('i', _("Icons")),
	])
	config.usage.movielist_unseen = ConfigYesNo(default = False)

	config.usage.swap_snr_on_osd = ConfigYesNo(default = False)

	config.usage.frontled_color = ConfigSelection(default = "2", choices = [("0", _("Off")), ("1", _("Blue")), ("2", _("Red")), ("3", _("Blinking blue")), ("4",  _("Blinking red"))])
	config.usage.frontledrec_color = ConfigSelection(default = "3", choices = [("0", _("Off")), ("1", _("Blue")), ("2", _("Red")), ("3", _("Blinking blue")), ("4",  _("Blinking red"))])
	config.usage.frontledstdby_color = ConfigSelection(default = "0", choices = [("0", _("Off")), ("1", _("Blue")), ("2", _("Red")), ("3", _("Blinking blue")), ("4",  _("Blinking red"))])
	config.usage.frontledrecstdby_color = ConfigSelection(default = "3", choices = [("0", _("Off")), ("1", _("Blue")), ("2", _("Red")), ("3", _("Blinking blue")), ("4",  _("Blinking red"))])

	config.usage.lcd_scroll_delay = ConfigSelection(default = "10000", choices = [
		("10000", "10 " + _("seconds")),
		("20000", "20 " + _("seconds")),
		("30000", "30 " + _("seconds")),
		("60000", "1 " + _("minute")),
		("300000", "5 " + _("minutes")),
		("noscrolling", _("off"))])
	config.usage.lcd_scroll_speed = ConfigSelection(default = "300", choices = [
		("500", _("slow")),
		("300", _("normal")),
		("100", _("fast"))])

	def SpinnerOnOffChanged(configElement):
		setSpinnerOnOff(int(configElement.value))
	config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)

	def EnableTtCachingChanged(configElement):
		setEnableTtCachingOnOff(int(configElement.value))
	config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)

	def TunerTypePriorityOrderChanged(configElement):
		setTunerTypePriorityOrder(int(configElement.value))
	config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)

	def PreferredTunerChanged(configElement):
		setPreferredTuner(int(configElement.value))
	config.usage.frontend_priority.addNotifier(PreferredTunerChanged)

	config.usage.show_picon_in_display = ConfigYesNo(default = True)
	config.usage.hide_zap_errors = ConfigYesNo(default = False)
	config.usage.show_cryptoinfo = ConfigYesNo(default = True)
	config.usage.show_eit_nownext = ConfigYesNo(default = True)
	config.usage.show_vcr_scart = ConfigYesNo(default = False)
	config.usage.show_update_disclaimer = ConfigYesNo(default = True)
	config.usage.pic_resolution = ConfigSelection(default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")][:SystemInfo["HasFullHDSkinSupport"] and 4 or 3])

	if SystemInfo["Fan"]:
		choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))]
		if os.path.exists("/proc/stb/fp/fan_choices"):
			choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")]
		config.usage.fan = ConfigSelection(choicelist)
		def fanChanged(configElement):
			open(SystemInfo["Fan"], "w").write(configElement.value)
		config.usage.fan.addNotifier(fanChanged)

	if SystemInfo["FanPWM"]:
		def fanSpeedChanged(configElement):
			open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:])
		config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255))
		config.usage.fanspeed.addNotifier(fanSpeedChanged)

	if SystemInfo["StandbyLED"]:
		def standbyLEDChanged(configElement):
			open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
		config.usage.standbyLED = ConfigYesNo(default = True)
		config.usage.standbyLED.addNotifier(standbyLEDChanged)

	if SystemInfo["SuspendLED"]:
		def suspendLEDChanged(configElement):
			open(SystemInfo["SuspendLED"], "w").write(configElement.value and "on" or "off")
		config.usage.suspendLED = ConfigYesNo(default = True)
		config.usage.suspendLED.addNotifier(suspendLEDChanged)

	if SystemInfo["PowerOffDisplay"]:
		def powerOffDisplayChanged(configElement):
			open(SystemInfo["PowerOffDisplay"], "w").write(configElement.value and "1" or "0")
		config.usage.powerOffDisplay = ConfigYesNo(default = True)
		config.usage.powerOffDisplay.addNotifier(powerOffDisplayChanged)

	if SystemInfo["LCDshow_symbols"]:
		def lcdShowSymbols(configElement):
			open(SystemInfo["LCDshow_symbols"], "w").write(configElement.value and "1" or "0")
		config.usage.lcd_show_symbols = ConfigYesNo(default = True)
		config.usage.lcd_show_symbols.addNotifier(lcdShowSymbols)

	if SystemInfo["WakeOnLAN"]:
		def wakeOnLANChanged(configElement):
			if "fp" in SystemInfo["WakeOnLAN"]:
				open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")
			else:
				open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
		config.usage.wakeOnLAN = ConfigYesNo(default = False)
		config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged)

	if SystemInfo["LcdLiveTVMode"]:
		def setLcdLiveTVMode(configElement):
			open(SystemInfo["LcdLiveTVMode"], "w").write(configElement.value)
		config.usage.LcdLiveTVMode = ConfigSelection(default = "0", choices=[str(x) for x in range(0,9)])
		config.usage.LcdLiveTVMode.addNotifier(setLcdLiveTVMode)

	if SystemInfo["LcdLiveDecoder"]:
		def setLcdLiveDecoder(configElement):
			open(SystemInfo["LcdLiveDecoder"], "w").write(configElement.value)
		config.usage.LcdLiveDecoder = ConfigSelection(default = "0", choices=[str(x) for x in range(0,4)])
		config.usage.LcdLiveDecoder.addNotifier(setLcdLiveDecoder)

	config.usage.boolean_graphic = ConfigYesNo(default=True)

	config.epg = ConfigSubsection()
	config.epg.eit = ConfigYesNo(default = True)
	config.epg.mhw = ConfigYesNo(default = False)
	config.epg.freesat = ConfigYesNo(default = True)
	config.epg.viasat = ConfigYesNo(default = True)
	config.epg.netmed = ConfigYesNo(default = True)
	config.epg.virgin = ConfigYesNo(default = False)
	config.misc.showradiopic = ConfigYesNo(default = True)
	def EpgSettingsChanged(configElement):
		from enigma import eEPGCache
		mask = 0xffffffff
		if not config.epg.eit.value:
			mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
		if not config.epg.mhw.value:
			mask &= ~eEPGCache.MHW
		if not config.epg.freesat.value:
			mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
		if not config.epg.viasat.value:
			mask &= ~eEPGCache.VIASAT
		if not config.epg.netmed.value:
			mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
		if not config.epg.virgin.value:
			mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
		eEPGCache.getInstance().setEpgSources(mask)
	config.epg.eit.addNotifier(EpgSettingsChanged)
	config.epg.mhw.addNotifier(EpgSettingsChanged)
	config.epg.freesat.addNotifier(EpgSettingsChanged)
	config.epg.viasat.addNotifier(EpgSettingsChanged)
	config.epg.netmed.addNotifier(EpgSettingsChanged)
	config.epg.virgin.addNotifier(EpgSettingsChanged)

	config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
	def EpgHistorySecondsChanged(configElement):
		from enigma import eEPGCache
		eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
	config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)

	def setHDDStandby(configElement):
		for hdd in harddiskmanager.HDDList():
			hdd[1].setIdleTime(int(configElement.value))
	config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)

	if SystemInfo["12V_Output"]:
		def set12VOutput(configElement):
			Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
		config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)

	config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))
	config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml"))
	config.usage.alternative_imagefeed = ConfigText(default="", fixed_size=False)

	config.seek = ConfigSubsection()
	config.seek.selfdefined_13 = ConfigNumber(default=15)
	config.seek.selfdefined_46 = ConfigNumber(default=60)
	config.seek.selfdefined_79 = ConfigNumber(default=300)

	config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
	config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])

	config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
	config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])

	config.seek.on_pause = ConfigSelection(default = "play", choices = [
		("play", _("Play")),
		("step", _("Single step (GOP)")),
		("last", _("Last speed")) ])

	config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])

	def updateEnterForward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_forward, configElement.value)

	config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)

	def updateEnterBackward(configElement):
		if not configElement.value:
			configElement.value = [2]
		updateChoices(config.seek.enter_backward, configElement.value)

	config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)

	def updateEraseSpeed(el):
		eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
	def updateEraseFlags(el):
		eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
	config.misc.erase_speed = ConfigSelection(default="20", choices = [
		("10", _("10 MB/s")),
		("20", _("20 MB/s")),
		("50", _("50 MB/s")),
		("100", _("100 MB/s"))])
	config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
	config.misc.erase_flags = ConfigSelection(default="1", choices = [
		("0", _("Disable")),
		("1", _("Internal hdd only")),
		("3", _("Everywhere"))])
	config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)

	if SystemInfo["ZapMode"]:
		def setZapmode(el):
			open(SystemInfo["ZapMode"], "w").write(el.value)
		config.misc.zapmode = ConfigSelection(default = "mute", choices = [
			("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
		config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)

	if SystemInfo["VFD_scroll_repeats"]:
		def scroll_repeats(el):
			open(SystemInfo["VFD_scroll_repeats"], "w").write(el.value)
		choicelist = []
		for i in range(1, 11, 1):
			choicelist.append((str(i)))
		config.usage.vfd_scroll_repeats = ConfigSelection(default = "3", choices = choicelist)
		config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats, immediate_feedback = False)

	if SystemInfo["VFD_scroll_delay"]:
		def scroll_delay(el):
			open(SystemInfo["VFD_scroll_delay"], "w").write(el.value)
		choicelist = []
		for i in range(0, 1001, 50):
			choicelist.append((str(i)))
		config.usage.vfd_scroll_delay = ConfigSelection(default = "150", choices = choicelist)
		config.usage.vfd_scroll_delay.addNotifier(scroll_delay, immediate_feedback = False)

	if SystemInfo["VFD_initial_scroll_delay"]:
		def initial_scroll_delay(el):
			open(SystemInfo["VFD_initial_scroll_delay"], "w").write(el.value)
		choicelist = []
		for i in range(0, 20001, 500):
			choicelist.append((str(i)))
		config.usage.vfd_initial_scroll_delay = ConfigSelection(default = "1000", choices = choicelist)
		config.usage.vfd_initial_scroll_delay.addNotifier(initial_scroll_delay, immediate_feedback = False)

	if SystemInfo["VFD_final_scroll_delay"]:
		def final_scroll_delay(el):
			open(SystemInfo["VFD_final_scroll_delay"], "w").write(el.value)
		choicelist = []
		for i in range(0, 20001, 500):
			choicelist.append((str(i)))
		config.usage.vfd_final_scroll_delay = ConfigSelection(default = "1000", choices = choicelist)
		config.usage.vfd_final_scroll_delay.addNotifier(final_scroll_delay, immediate_feedback = False)

	if SystemInfo["HasBypassEdidChecking"]:
		def setHasBypassEdidChecking(configElement):
			open(SystemInfo["HasBypassEdidChecking"], "w").write(configElement.value)
		config.av.bypassEdidChecking = ConfigSelection(default = "00000000", choices = [ ("00000001", _("yes")), ("00000000", _("no"))] )
		config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking)

	if SystemInfo["HasColorspace"]:
		def setHaveColorspace(configElement):
			open(SystemInfo["HasColorspace"], "w").write(configElement.value)
		if SystemInfo["HasColorspaceSimple"]:
			config.av.hdmicolorspace = ConfigSelection(default = "Edid(Auto)", choices={"Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")})
		else:
			if getBoxType() in ("dm900","dm920","vuzero4k"):
				config.av.hdmicolorspace = ConfigSelection(choices={
						"Edid(Auto)": _("Auto"),
						"Hdmi_Rgb": _("RGB"),
						"Itu_R_BT_709": _("BT709"),
						"DVI_Full_Range_RGB": _("Full Range RGB"),
						"FCC": _("FCC 1953"),
						"Itu_R_BT_470_2_BG": _("BT470 BG"),
						"Smpte_170M": _("Smpte 170M"),
						"Smpte_240M": _("Smpte 240M"),
						"Itu_R_BT_2020_NCL": _("BT2020 NCL"),
						"Itu_R_BT_2020_CL": _("BT2020 CL"),
						"XvYCC_709": _("BT709 XvYCC"),
						"XvYCC_601": _("BT601 XvYCC")},
						default = "Edid(Auto)")
			else:
				config.av.hdmicolorspace = ConfigSelection(default = "auto", choices={"auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444")})
		config.av.hdmicolorspace.addNotifier(setHaveColorspace)

	if SystemInfo["HasColordepth"]:
		def setHaveColordepth(configElement):
			open(SystemInfo["HasColordepth"], "w").write(configElement.value)
		config.av.hdmicolordepth = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")})
		config.av.hdmicolordepth.addNotifier(setHaveColordepth)

	if SystemInfo["HasHDMIpreemphasis"]:
		def setHDMIpreemphasis(configElement):
			open(SystemInfo["HasHDMIpreemphasis"], "w").write(configElement.value)
		config.av.hdmipreemphasis = ConfigSelection(default = "off", choices = [ ("on", _("yes")), ("off", _("no"))] )
		config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis)

	if SystemInfo["HasColorimetry"]:
		def setColorimetry(configElement):
			open(SystemInfo["HasColorimetry"], "w").write(configElement.value)
		config.av.hdmicolorimetry = ConfigSelection(default = "auto", choices = [("auto", _("Auto")), ("bt2020ncl", _("BT 2020 NCL")), ("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))])
		config.av.hdmicolorimetry.addNotifier(setColorimetry)

	if SystemInfo["HasHdrType"]:
		def setHdmiHdrType(configElement):
			open(SystemInfo["HasHdrType"], "w").write(configElement.value)
		config.av.hdmihdrtype = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "none": _("SDR"), "hdr10": _("HDR10"), "hlg": _("HLG"), "dolby": _("Dolby")})
		config.av.hdmihdrtype.addNotifier(setHdmiHdrType)
		
	if SystemInfo["HDRSupport"]:
		def setHlgSupport(configElement):
			open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value)
		config.av.hlg_support = ConfigSelection(default = "auto(EDID)", 
			choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ])
		config.av.hlg_support.addNotifier(setHlgSupport)

		def setHdr10Support(configElement):
			open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value)
		config.av.hdr10_support = ConfigSelection(default = "auto(EDID)", 
			choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ])
		config.av.hdr10_support.addNotifier(setHdr10Support)

		def setDisable12Bit(configElement):
			open("/proc/stb/video/disable_12bit", "w").write(configElement.value)
		config.av.allow_12bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]);
		config.av.allow_12bit.addNotifier(setDisable12Bit)

		def setDisable10Bit(configElement):
			open("/proc/stb/video/disable_10bit", "w").write(configElement.value)
		config.av.allow_10bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]);
		config.av.allow_10bit.addNotifier(setDisable10Bit)

	config.subtitles = ConfigSubsection()
	config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
		("0", _("original")),
		("1", _("white")),
		("2", _("yellow")) ])
	config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
	config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
	config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
	config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
	config.subtitles.colourise_dialogs = ConfigYesNo(default = False)
	config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
	config.subtitles.subtitle_fontsize  = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40")
	config.subtitles.showbackground = ConfigYesNo(default = False)

	subtitle_delay_choicelist = []
	for i in range(-900000, 1845000, 45000):
		if i == 0:
			subtitle_delay_choicelist.append(("0", _("No delay")))
		else:
			subtitle_delay_choicelist.append((str(i), _("%2.1f sec") % (i / 90000.)))
	config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)

	config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
	config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
	config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False)
	config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
	config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
		("0", _("No transparency")),
		("25", "10%"),
		("50", "20%"),
		("75", "30%"),
		("100", "40%"),
		("125", "50%"),
		("150", "60%"),
		("175", "70%"),
		("200", "80%"),
		("225", "90%"),
		("255", _("Full transparency"))])
	config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [
		("0", _("alternative")),
		("1", _("white")),
		("2", _("yellow")) ])
	config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True)
	config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
	config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
		("1", _("Original")),
		("23976", _("23.976")),
		("24000", _("24")),
		("25000", _("25")),
		("29970", _("29.97")),
		("30000", _("30"))])
	config.subtitles.pango_autoturnon = ConfigYesNo(default = True)

	config.autolanguage = ConfigSubsection()
	audio_language_choices=[
		("", _("None")),
		("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
		("ara", _("Arabic")),
		("eus baq", _("Basque")),
		("bul", _("Bulgarian")),
		("hrv", _("Croatian")),
		("chn sgp", _("Chinese - Simplified")),
		("twn hkn",_("Chinese - Traditional")),
		("ces cze", _("Czech")),
		("dan", _("Danish")),
		("dut ndl nld", _("Dutch")),
		("eng qaa", _("English")),
		("est", _("Estonian")),
		("fin", _("Finnish")),
		("fra fre", _("French")),
		("deu ger", _("German")),
		("ell gre", _("Greek")),
		("heb", _("Hebrew")),
		("hun", _("Hungarian")),
		("ind", _("Indonesian")),
		("ita", _("Italian")),
		("lav", _("Latvian")),
		("lit", _("Lithuanian")),
		("ltz", _("Luxembourgish")),
		("nor", _("Norwegian")),
		("fas per fa pes", _("Persian")),
		("pol", _("Polish")),
		("por dub Dub DUB ud1", _("Portuguese")),
		("ron rum", _("Romanian")),
		("rus", _("Russian")),
		("srp", _("Serbian")),
		("slk slo", _("Slovak")),
		("slv", _("Slovenian")),
		("spa", _("Spanish")),
		("swe", _("Swedish")),
		("tha", _("Thai")),
		("tur Audio_TUR", _("Turkish")),
		("ukr Ukr", _("Ukrainian"))]

	epg_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
	def setEpgLanguage(configElement):
		eServiceEvent.setEPGLanguage(configElement.value)
	def setEpgLanguageAlternative(configElement):
		eServiceEvent.setEPGLanguageAlternative(configElement.value)
	def epglanguage(configElement):
		config.autolanguage.audio_epglanguage.setChoices([x for x in epg_language_choices if x[0] and x[0] != config.autolanguage.audio_epglanguage_alternative.value or not x[0] and not config.autolanguage.audio_epglanguage_alternative.value])
		config.autolanguage.audio_epglanguage_alternative.setChoices([x for x in epg_language_choices if x[0] and x[0] != config.autolanguage.audio_epglanguage.value or not x[0]])
	config.autolanguage.audio_epglanguage = ConfigSelection(epg_language_choices, default="")
	config.autolanguage.audio_epglanguage_alternative = ConfigSelection(epg_language_choices, default="")
	config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
	config.autolanguage.audio_epglanguage.addNotifier(epglanguage, initial_call=False)
	config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)
	config.autolanguage.audio_epglanguage_alternative.addNotifier(epglanguage)

	def getselectedlanguages(range):
		return [eval("config.autolanguage.audio_autoselect%x.value" % x) for x in range]
	def autolanguage(configElement):
		config.autolanguage.audio_autoselect1.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((2,3,4)) or not x[0] and not config.autolanguage.audio_autoselect2.value])
		config.autolanguage.audio_autoselect2.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,3,4)) or not x[0] and not config.autolanguage.audio_autoselect3.value])
		config.autolanguage.audio_autoselect3.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,2,4)) or not x[0] and not config.autolanguage.audio_autoselect4.value])
		config.autolanguage.audio_autoselect4.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,2,3)) or not x[0]])
	config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="")
	config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="")
	config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="")
	config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="")
	config.autolanguage.audio_autoselect1.addNotifier(autolanguage, initial_call=False)
	config.autolanguage.audio_autoselect2.addNotifier(autolanguage, initial_call=False)
	config.autolanguage.audio_autoselect3.addNotifier(autolanguage, initial_call=False)
	config.autolanguage.audio_autoselect4.addNotifier(autolanguage)
	config.autolanguage.audio_defaultac3 = ConfigYesNo(default = True)
	config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
	config.autolanguage.audio_usecache = ConfigYesNo(default = True)

	subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
	def getselectedsublanguages(range):
		return [eval("config.autolanguage.subtitle_autoselect%x.value" % x) for x in range]
	def autolanguagesub(configElement):
		config.autolanguage.subtitle_autoselect1.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((2,3,4)) or not x[0] and not config.autolanguage.subtitle_autoselect2.value])
		config.autolanguage.subtitle_autoselect2.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,3,4)) or not x[0] and not config.autolanguage.subtitle_autoselect3.value])
		config.autolanguage.subtitle_autoselect3.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,2,4)) or not x[0] and not config.autolanguage.subtitle_autoselect4.value])
		config.autolanguage.subtitle_autoselect4.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,2,3)) or not x[0]])
		choicelist = [('0', None)]
		for y in range(1, 15 if config.autolanguage.subtitle_autoselect4.value else (7 if config.autolanguage.subtitle_autoselect3.value else(4 if config.autolanguage.subtitle_autoselect2.value else (2 if config.autolanguage.subtitle_autoselect1.value else 0)))):
			choicelist.append((str(y), ", ".join([eval("config.autolanguage.subtitle_autoselect%x.getText()" % x) for x in (y & 1, y & 2, y & 4 and 3, y & 8 and 4) if x])))
		if config.autolanguage.subtitle_autoselect3.value:
			choicelist.append((str(y+1), "All"))
		config.autolanguage.equal_languages.setChoices(choicelist, default="0")
	config.autolanguage.equal_languages = ConfigSelection(default = "0", choices = [])
	config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="")
	config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="")
	config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="")
	config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="")
	config.autolanguage.subtitle_autoselect1.addNotifier(autolanguagesub, initial_call=False)
	config.autolanguage.subtitle_autoselect2.addNotifier(autolanguagesub, initial_call=False)
	config.autolanguage.subtitle_autoselect3.addNotifier(autolanguagesub, initial_call=False)
	config.autolanguage.subtitle_autoselect4.addNotifier(autolanguagesub)
	config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
	config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
	config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
	config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)

	config.oscaminfo = ConfigSubsection()
	if SystemInfo["OScamInstalled"] or SystemInfo["NCamInstalled"]:
		config.oscaminfo.showInExtensions = ConfigYesNo(default=True)
	else:
		config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
	config.oscaminfo.userdatafromconf = ConfigYesNo(default = True)
	config.oscaminfo.autoupdate = ConfigYesNo(default = False)
	config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12)
	config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False)
	config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True)
	config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) )
	config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True)

	config.streaming = ConfigSubsection()
	config.streaming.stream_ecm = ConfigYesNo(default = False)
	config.streaming.descramble = ConfigYesNo(default = True)
	config.streaming.descramble_client = ConfigYesNo(default = False)
	config.streaming.stream_eit = ConfigYesNo(default = True)
	config.streaming.stream_ait = ConfigYesNo(default = True)
	config.streaming.authentication = ConfigYesNo(default = False)

	config.mediaplayer = ConfigSubsection()
	config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False)
	config.mediaplayer.alternateUserAgent = ConfigText(default="")

	config.misc.softcam_setup = ConfigSubsection()
	config.misc.softcam_setup.extension_menu = ConfigYesNo(default = True)
Ejemplo n.º 7
0
def InitUsageConfig():
    config.usage = ConfigSubsection()
    config.usage.showdish = ConfigYesNo(default=True)
    config.misc.showrotorposition = ConfigSelection(default='no', choices=[('no', _('no')),
     ('yes', _('yes')),
     ('withtext', _('with text')),
     ('tunername', _('with tuner name'))])
    config.usage.multibouquet = ConfigYesNo(default=True)
    config.usage.alternative_number_mode = ConfigYesNo(default=False)

    def alternativeNumberModeChange(configElement):
        eDVBDB.getInstance().setNumberingMode(configElement.value)
        refreshServiceList()

    config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
    config.usage.hide_number_markers = ConfigYesNo(default=True)
    config.usage.hide_number_markers.addNotifier(refreshServiceList)
    config.usage.servicetype_icon_mode = ConfigSelection(default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename'))])
    config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
    config.usage.crypto_icon_mode = ConfigSelection(default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename'))])
    config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
    config.usage.record_indicator_mode = ConfigSelection(default='0', choices=[('0', _('None')),
     ('1', _('Left from servicename')),
     ('2', _('Right from servicename')),
     ('3', _('Red colored'))])
    config.usage.record_indicator_mode.addNotifier(refreshServiceList)
    choicelist = [('-1', _('Disable'))]
    for i in range(0, 1300, 100):
        choicelist.append((str(i), ngettext('%d pixel wide', '%d pixels wide', i) % i))

    config.usage.servicelist_column = ConfigSelection(default='-1', choices=choicelist)
    config.usage.servicelist_column.addNotifier(refreshServiceList)
    config.usage.service_icon_enable = ConfigYesNo(default=False)
    config.usage.service_icon_enable.addNotifier(refreshServiceList)
    config.usage.servicelist_cursor_behavior = ConfigSelection(default='standard', choices=[('standard', _('Standard')),
     ('keep', _('Keep service')),
     ('reverseB', _('Reverse bouquet buttons')),
     ('keep reverseB', _('Keep service') + ' + ' + _('Reverse bouquet buttons'))])
    choicelist = [('by skin', _('As defined by the skin'))]
    for i in range(5, 41):
        choicelist.append(str(i))

    config.usage.servicelist_number_of_services = ConfigSelection(default='by skin', choices=choicelist)
    config.usage.servicelist_number_of_services.addNotifier(refreshServiceList)
    config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False)
    config.usage.quickzap_bouquet_change = ConfigYesNo(default=False)
    config.usage.e1like_radio_mode = ConfigYesNo(default=True)
    choicelist = [('0', _('No timeout'))]
    for i in range(1, 12):
        choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))

    config.usage.infobar_timeout = ConfigSelection(default='5', choices=choicelist)
    config.usage.show_infobar_on_zap = ConfigYesNo(default=True)
    config.usage.show_infobar_on_skip = ConfigYesNo(default=True)
    config.usage.show_infobar_on_event_change = ConfigYesNo(default=False)
    config.usage.show_second_infobar = ConfigSelection(default=None, choices=[(None, _('None'))] + choicelist + [('EPG', _('EPG'))])
    config.usage.show_simple_second_infobar = ConfigYesNo(default=True)
    config.usage.infobar_frontend_source = ConfigSelection(default='tuner', choices=[('settings', _('Settings')), ('tuner', _('Tuner'))])
    config.usage.oldstyle_zap_controls = ConfigYesNo(default=False)
    config.usage.oldstyle_channel_select_controls = ConfigYesNo(default=False)
    config.usage.zap_with_ch_buttons = ConfigYesNo(default=False)
    config.usage.ok_is_channelselection = ConfigYesNo(default=False)
    config.usage.volume_instead_of_channelselection = ConfigYesNo(default=False)
    config.usage.channelselection_preview = ConfigYesNo(default=False)
    config.usage.show_spinner = ConfigYesNo(default=True)
    config.usage.menu_sort_weight = ConfigDictionarySet(default={'mainmenu': {'submenu': {}}})
    config.usage.menu_sort_mode = ConfigSelection(default='default', choices=[('a_z', _('alphabetical')), ('default', _('Default')), ('user', _('user defined'))])
    config.usage.menu_path = ConfigSelection(default='off', choices=[('off', _('Disabled')), ('small', _('Small')), ('large', _('Large'))])
    config.usage.enable_tt_caching = ConfigYesNo(default=True)
    choicelist = []
    for i in (10, 30):
        choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))

    for i in (60, 120, 300, 600, 1200, 1800):
        m = i / 60
        choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))

    for i in (3600, 7200, 14400):
        h = i / 3600
        choicelist.append((str(i), ngettext('%d hour', '%d hours', h) % h))

    config.usage.hdd_standby = ConfigSelection(default='300', choices=[('0', _('No standby'))] + choicelist)
    config.usage.output_12V = ConfigSelection(default='do not change', choices=[('do not change', _('Do not change')), ('off', _('Off')), ('on', _('On'))])
    config.usage.pip_zero_button = ConfigSelection(default='standard', choices=[('standard', _('Standard')),
     ('swap', _('Swap PiP and main picture')),
     ('swapstop', _('Move PiP to main picture')),
     ('stop', _('Stop PiP'))])
    config.usage.pip_hideOnExit = ConfigSelection(default='without popup', choices=[('no', _('No')), ('popup', _('With popup')), ('without popup', _('Without popup'))])
    choicelist = [('-1', _('Disabled')), ('0', _('No timeout'))]
    for i in [60,
     300,
     600,
     900,
     1800,
     2700,
     3600]:
        m = i / 60
        choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))

    config.usage.pip_last_service_timeout = ConfigSelection(default='0', choices=choicelist)
    config.usage.default_path = ConfigText(default=resolveFilename(SCOPE_HDD))
    config.usage.timer_path = ConfigText(default='<default>')
    config.usage.instantrec_path = ConfigText(default='<default>')
    config.usage.timeshift_path = ConfigText(default='/media/hdd/')
    config.usage.allowed_timeshift_paths = ConfigLocations(default=['/media/hdd/'])
    config.oscaminfo = ConfigSubsection()
    config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
    config.oscaminfo.userdatafromconf = ConfigYesNo(default=False)
    config.oscaminfo.autoupdate = ConfigYesNo(default=False)
    config.oscaminfo.username = ConfigText(default='username', fixed_size=False, visible_width=12)
    config.oscaminfo.password = ConfigPassword(default='password', fixed_size=False)
    config.oscaminfo.ip = ConfigIP(default=[127,
     0,
     0,
     1], auto_jump=True)
    config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536))
    config.oscaminfo.intervall = ConfigSelectionNumber(min=1, max=600, stepwidth=1, default=10, wraparound=True)
    SystemInfo['OScamInstalled'] = False
    config.cccaminfo = ConfigSubsection()
    config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
    config.cccaminfo.serverNameLength = ConfigSelectionNumber(min=10, max=100, stepwidth=1, default=22, wraparound=True)
    config.cccaminfo.name = ConfigText(default='Profile', fixed_size=False)
    config.cccaminfo.ip = ConfigText(default='192.168.2.12', fixed_size=False)
    config.cccaminfo.username = ConfigText(default='', fixed_size=False)
    config.cccaminfo.password = ConfigText(default='', fixed_size=False)
    config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
    config.cccaminfo.profile = ConfigText(default='', fixed_size=False)
    config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
    config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min=1, max=10, stepwidth=1, default=5, wraparound=True)
    config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
    config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
    config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
    config.cccaminfo.blacklist = ConfigText(default='/media/cf/CCcamInfo.blacklisted', fixed_size=False)
    config.cccaminfo.profiles = ConfigText(default='/media/cf/CCcamInfo.profiles', fixed_size=False)
    config.usage.movielist_trashcan = ConfigYesNo(default=True)
    config.usage.movielist_trashcan_days = ConfigNumber(default=8)
    config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
    config.usage.on_movie_start = ConfigSelection(default='resume', choices=[('ask yes', _('Ask user') + ' ' + _('default') + ' ' + _('yes')),
     ('ask no', _('Ask user') + ' ' + _('default') + ' ' + _('no')),
     ('resume', _('Resume from last position')),
     ('beginning', _('Start from the beginning'))])
    config.usage.on_movie_stop = ConfigSelection(default='movielist', choices=[('ask', _('Ask user')), ('movielist', _('Return to movie list')), ('quit', _('Return to previous service'))])
    config.usage.on_movie_eof = ConfigSelection(default='movielist', choices=[('ask', _('Ask user')),
     ('movielist', _('Return to movie list')),
     ('quit', _('Return to previous service')),
     ('pause', _('Pause movie at end')),
     ('playlist', _('Play next (return to movie list)')),
     ('playlistquit', _('Play next (return to previous service)')),
     ('loop', _('Continues play (loop)')),
     ('repeatcurrent', _('Repeat'))])
    config.usage.next_movie_msg = ConfigYesNo(default=True)
    config.usage.last_movie_played = ConfigText()
    config.usage.leave_movieplayer_onExit = ConfigSelection(default='popup', choices=[('no', _('No')),
     ('popup', _('With popup')),
     ('without popup', _('Without popup')),
     ('movielist', _('Return to movie list'))])
    config.usage.setup_level = ConfigSelection(default='expert', choices=[('simple', _('Simple')), ('intermediate', _('Intermediate')), ('expert', _('Expert'))])
    config.usage.startup_to_standby = ConfigSelection(default='no', choices=[('no', _('No')), ('yes', _('Yes')), ('except', _('No, except Wakeup timer'))])
    config.usage.wakeup_menu = ConfigNothing()
    config.usage.wakeup_enabled = ConfigYesNo(default=False)
    config.usage.wakeup_day = ConfigSubDict()
    config.usage.wakeup_time = ConfigSubDict()
    for i in range(7):
        config.usage.wakeup_day[i] = ConfigEnableDisable(default=False)
        config.usage.wakeup_time[i] = ConfigClock(default=21600)

    choicelist = [('0', _('Do nothing'))]
    for i in range(3600, 21601, 3600):
        h = abs(i / 3600)
        h = ngettext('%d hour', '%d hours', h) % h
        choicelist.append((str(i), _('Standby in ') + h))

    config.usage.inactivity_timer = ConfigSelection(default='0', choices=choicelist)
    config.usage.inactivity_timer_blocktime = ConfigYesNo(default=True)
    config.usage.inactivity_timer_blocktime_begin = ConfigClock(default=time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
    config.usage.inactivity_timer_blocktime_end = ConfigClock(default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
    config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default=False)
    config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
    config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default=time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
    choicelist = [('0', _('Disabled')), ('event_standby', _('Standby after current event'))]
    for i in range(900, 7201, 900):
        m = abs(i / 60)
        m = ngettext('%d minute', '%d minutes', m) % m
        choicelist.append((str(i), _('Standby in ') + m))

    config.usage.sleep_timer = ConfigSelection(default='0', choices=choicelist)
    choicelist = [('0', _('Disabled'))]
    for i in [60, 300, 600] + range(900, 7201, 900):
        m = abs(i / 60)
        m = ngettext('%d minute', '%d minutes', m) % m
        choicelist.append((str(i), _('after ') + m))

    config.usage.standby_to_shutdown_timer = ConfigSelection(default='0', choices=choicelist)
    config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default=True)
    config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
    config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
    choicelist = [('0', _('Disabled'))]
    for m in (1, 5, 10, 15, 30, 60):
        choicelist.append((str(m * 60), ngettext('%d minute', '%d minutes', m) % m))

    config.usage.screen_saver = ConfigSelection(default='300', choices=choicelist)
    config.usage.check_timeshift = ConfigYesNo(default=True)
    choicelist = [('0', _('Disabled'))]
    for i in (2, 3, 4, 5, 10, 20, 30):
        choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))

    for i in (60, 120, 300):
        m = i / 60
        choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))

    config.usage.timeshift_start_delay = ConfigSelection(default='0', choices=choicelist)
    config.usage.alternatives_priority = ConfigSelection(default='0', choices=[('0', 'DVB-S/-C/-T'),
     ('1', 'DVB-S/-T/-C'),
     ('2', 'DVB-C/-S/-T'),
     ('3', 'DVB-C/-T/-S'),
     ('4', 'DVB-T/-C/-S'),
     ('5', 'DVB-T/-S/-C'),
     ('127', _('No priority'))])
    config.usage.remote_fallback_enabled = ConfigYesNo(default=False)
    config.usage.remote_fallback = ConfigText(default='', fixed_size=False)
    config.usage.show_timer_conflict_warning = ConfigYesNo(default=True)
    dvbs_nims = [('-2', _('Disabled'))]
    dvbt_nims = [('-2', _('Disabled'))]
    dvbc_nims = [('-2', _('Disabled'))]
    atsc_nims = [("-2", _("Disabled"))]
    nims = [('-1', _('auto'))]
    for x in nimmanager.nim_slots:
        if x.isCompatible('DVB-S'):
            dvbs_nims.append((str(x.slot), x.getSlotName()))
        elif x.isCompatible('DVB-T'):
            dvbt_nims.append((str(x.slot), x.getSlotName()))
        elif x.isCompatible('DVB-C'):
            dvbc_nims.append((str(x.slot), x.getSlotName()))
        elif x.isCompatible("ATSC"):
			atsc_nims.append((str(x.slot), x.getSlotName()))    
        nims.append((str(x.slot), x.getSlotName()))

    config.usage.frontend_priority = ConfigSelection(default='-1', choices=list(nims))
    nims.insert(0, ('-2', _('Disabled')))
    config.usage.recording_frontend_priority = ConfigSelection(default='-2', choices=nims)
    config.usage.frontend_priority_dvbs = ConfigSelection(default='-2', choices=list(dvbs_nims))
    dvbs_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_dvbs = ConfigSelection(default='-2', choices=dvbs_nims)
    config.usage.frontend_priority_dvbt = ConfigSelection(default='-2', choices=list(dvbt_nims))
    dvbt_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_dvbt = ConfigSelection(default='-2', choices=dvbt_nims)
    config.usage.frontend_priority_dvbc = ConfigSelection(default='-2', choices=list(dvbc_nims))
    dvbc_nims.insert(1, ('-1', _('auto')))
    config.usage.recording_frontend_priority_dvbc = ConfigSelection(default='-2', choices=dvbc_nims)
    config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims))
	atsc_nims.insert(1,("-1", _("auto")))
	config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims)