def InitUsageConfig():
config.misc.useNTPminutes = ConfigSelection(default = "30", choices = [("30", "30" + " " +_("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))])
config.usage = ConfigSubsection()
config.usage.showdish = ConfigYesNo(default = True)
config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))])
config.usage.multibouquet = ConfigYesNo(default = True)
config.usage.alternative_number_mode = ConfigYesNo(default = False)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
config.usage.hide_number_markers = ConfigYesNo(default = True)
config.usage.hide_number_markers.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [("-1", _("Disable"))]
for i in range(0,1300,100):
choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i))
config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default = False)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")),
("keep", _("Keep service")),
("reverseB", _("Reverse bouquet buttons")),
("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])
config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
config.usage.e1like_radio_mode = ConfigYesNo(default = True)
config.usage.volume_step_slow = ConfigSelectionNumber(default = 1, stepwidth = 1, min = 1, max = 10, wraparound = False)
config.usage.volume_step_fast = ConfigSelectionNumber(default = 3, stepwidth = 1, min = 1, max = 10, wraparound = False)
choicelist = [("0", _("No timeout"))]
for i in range(1, 12):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
config.usage.show_second_infobar = ConfigSelection(default = "11", choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))])
config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
config.usage.oldstyle_zap_controls = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")),
("neutrino", _("Neutrino")),
("openspa", _("OpenSPA")) ])
config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False)
config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
config.usage.ok_is_channelselection = ConfigYesNo(default = False)
config.usage.channelselection_preview = ConfigYesNo(default = False)
config.usage.show_spinner = ConfigYesNo(default = True)
config.usage.enable_tt_caching = ConfigYesNo(default = True)
config.usage.sort_settings = ConfigYesNo(default = False)
config.usage.sort_menus = ConfigYesNo(default = False)
choicelist = []
for i in (10, 30):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h))
config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
config.usage.hdd_standby_in_standby = ConfigSelection(default = "-1", choices = [("-1", _("Same as in active")), ("0", _("No standby"))] + choicelist)
config.usage.hdd_timer = ConfigYesNo(default = False)
config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])
config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])
config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
for i in [60, 300, 600, 900, 1800, 2700, 3600]:
m = i/60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)
config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD))
config.usage.timer_path = ConfigText(default = "<default>")
config.usage.instantrec_path = ConfigText(default = "<default>")
config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])
config.oscaminfo = ConfigSubsection()
config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
config.oscaminfo.userdatafromconf = ConfigYesNo(default = False)
config.oscaminfo.autoupdate = ConfigYesNo(default = False)
config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12)
config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False)
config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True)
config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) )
config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True)
config.cccaminfo = ConfigSubsection()
config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True)
config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
config.cccaminfo.username = ConfigText(default="", fixed_size=False)
config.cccaminfo.password = ConfigText(default="", fixed_size=False)
config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True)
config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_days = ConfigNumber(default=8)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")),
("ask no", _("Ask user") + " " + _("default") + " " + _("no")),
("resume", _("Resume from last position")),
("beginning", _("Start from the beginning"))])
config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))])
config.usage.next_movie_msg = ConfigYesNo(default = True)
config.usage.last_movie_played = ConfigText()
config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ])
config.usage.setup_level = ConfigSelection(default = "expert", choices = [
("simple", _("Simple")),
("intermediate", _("Intermediate")),
("expert", _("Expert")) ])
config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [
("no", _("No")),
("yes", _("Yes")),
("except", _("No, except Wakeup timer")) ])
config.usage.wakeup_menu = ConfigNothing()
config.usage.wakeup_enabled = ConfigYesNo(default = False)
config.usage.wakeup_day = ConfigSubDict()
config.usage.wakeup_time = ConfigSubDict()
for i in range(7):
config.usage.wakeup_day[i] = ConfigEnableDisable(default = False)
config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60))
config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby")),
("restart", _("Reboot")) ] )
config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby")) ] )
choicelist = [("0", _("Do nothing"))]
for i in range(3600, 21601, 3600):
h = abs(i / 3600)
h = ngettext("%d hour", "%d hours", h) % h
choicelist.append((str(i), _("Standby in ") + h))
config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
for i in range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append((str(i), _("Standby in ") + m))
config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)
choicelist = [("0", _("Disabled"))]
for i in [60, 300, 600] + range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append((str(i), _("after ") + m))
config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = True)
config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled"))]
for m in (1, 5, 10, 15, 30, 60):
choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m))
config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist)
config.usage.check_timeshift = ConfigYesNo(default = True)
choicelist = [("0", _("Disabled"))]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)
config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [
("0", "DVB-S/-C/-T"),
("1", "DVB-S/-T/-C"),
("2", "DVB-C/-S/-T"),
("3", "DVB-C/-T/-S"),
("4", "DVB-T/-C/-S"),
("5", "DVB-T/-S/-C"),
("127", _("No priority")) ])
config.usage.remote_fallback_enabled = ConfigYesNo(default = False)
config.usage.remote_fallback = ConfigText(default = _("http://IP-ADDRESS:8001"), fixed_size = False)
config.usage.show_timer_conflict_warning = ConfigYesNo(default = True)
dvbs_nims = [("-2", _("Disabled"))]
dvbt_nims = [("-2", _("Disabled"))]
dvbc_nims = [("-2", _("Disabled"))]
nims = [("-1", _("auto"))]
for x in nimmanager.nim_slots:
if x.isCompatible("DVB-S"):
dvbs_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("DVB-T"):
dvbt_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("DVB-C"):
dvbc_nims.append((str(x.slot), x.getSlotName()))
nims.append((str(x.slot), x.getSlotName()))
config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
nims.insert(0,("-2", _("Disabled")))
config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims))
dvbs_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims)
config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims))
dvbt_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims)
config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims))
dvbc_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims)
SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and (len(dvbt_nims) > 2 or len(dvbc_nims) > 2)
SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and (len(dvbs_nims) > 2 or len(dvbc_nims) > 2)
SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and (len(dvbs_nims) > 2 or len(dvbt_nims) > 2)
config.misc.disable_background_scan = ConfigYesNo(default = False)
config.usage.servicenum_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
config.usage.servicename_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
config.usage.serviceitems_per_page = ConfigSelectionNumber(default = 14, stepwidth = 1, min = 8, max = 20, wraparound = True)
config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [
('barleft', _("Progress bar left")),
('barright', _("Progress bar right")),
('percleft', _("Percentage left")),
('percright', _("Percentage right")),
('no', _("No")) ])
config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)
config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)
config.usage.blinking_rec_symbol_during_recording = ConfigYesNo(default = False)
config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)
config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
('o', _("Off")),
('p', _("Progress")),
('s', _("Small progress")),
('i', _("Icons")),
])
config.usage.movielist_unseen = ConfigYesNo(default = False)
config.usage.swap_snr_on_osd = ConfigYesNo(default = False)
config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False)
config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False)
config.usage.lcd_scroll_delay = ConfigSelection(default = "10000", choices = [
("10000", "10 " + _("seconds")),
("20000", "20 " + _("seconds")),
("30000", "30 " + _("seconds")),
("60000", "1 " + _("minute")),
("300000", "5 " + _("minutes")),
("noscrolling", _("off"))])
config.usage.lcd_scroll_speed = ConfigSelection(default = "300", choices = [
("500", _("slow")),
("300", _("normal")),
("100", _("fast"))])
config.usage.maxchannelnumlen = ConfigSelection(default = "5", choices = [("4", _("4")), ("5", _("5"))])
config.usage.numzaptimeoutmode = ConfigSelection(default = "standard", choices = [("standard", _("Standard")), ("userdefined", _("User defined")), ("off", _("off"))])
config.usage.numzaptimeout1 = ConfigSlider(default = 3000, increment = 250, limits = (750, 5000))
config.usage.numzaptimeout2 = ConfigSlider(default = 1000, increment = 250, limits = (750, 5000))
def SpinnerOnOffChanged(configElement):
setSpinnerOnOff(int(configElement.value))
config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)
def EnableTtCachingChanged(configElement):
setEnableTtCachingOnOff(int(configElement.value))
config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)
def TunerTypePriorityOrderChanged(configElement):
setTunerTypePriorityOrder(int(configElement.value))
config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)
def PreferredTunerChanged(configElement):
setPreferredTuner(int(configElement.value))
config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
config.usage.hide_zap_errors = ConfigYesNo(default = False)
config.usage.hide_ci_messages = ConfigYesNo(default = True)
config.usage.show_cryptoinfo = ConfigYesNo(default = True)
config.usage.show_eit_nownext = ConfigYesNo(default = True)
config.usage.show_vcr_scart = ConfigYesNo(default = False)
config.usage.show_update_disclaimer = ConfigYesNo(default = True)
config.usage.pic_resolution = ConfigSelection(default = None, choices = [(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")])
if SystemInfo["Fan"]:
choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))]
if os.path.exists("/proc/stb/fp/fan_choices"):
choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")]
config.usage.fan = ConfigSelection(choicelist)
def fanChanged(configElement):
open(SystemInfo["Fan"], "w").write(configElement.value)
config.usage.fan.addNotifier(fanChanged)
if SystemInfo["FanPWM"]:
def fanSpeedChanged(configElement):
open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:])
config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255))
config.usage.fanspeed.addNotifier(fanSpeedChanged)
if SystemInfo["StandbyLED"]:
def standbyLEDChanged(configElement):
open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
config.usage.standbyLED = ConfigYesNo(default = True)
config.usage.standbyLED.addNotifier(standbyLEDChanged)
config.epg = ConfigSubsection()
config.epg.eit = ConfigYesNo(default = True)
config.epg.mhw = ConfigYesNo(default = True)
config.epg.freesat = ConfigYesNo(default = True)
config.epg.viasat = ConfigYesNo(default = True)
config.epg.netmed = ConfigYesNo(default = True)
config.epg.virgin = ConfigYesNo(default = False)
config.misc.showradiopic = ConfigYesNo(default = True)
def EpgSettingsChanged(configElement):
from enigma import eEPGCache
mask = 0xffffffff
if not config.epg.eit.value:
mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
if not config.epg.mhw.value:
mask &= ~eEPGCache.MHW
if not config.epg.freesat.value:
mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
if not config.epg.viasat.value:
mask &= ~eEPGCache.VIASAT
if not config.epg.netmed.value:
mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
if not config.epg.virgin.value:
mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
eEPGCache.getInstance().setEpgSources(mask)
config.epg.eit.addNotifier(EpgSettingsChanged)
config.epg.mhw.addNotifier(EpgSettingsChanged)
config.epg.freesat.addNotifier(EpgSettingsChanged)
config.epg.viasat.addNotifier(EpgSettingsChanged)
config.epg.netmed.addNotifier(EpgSettingsChanged)
config.epg.virgin.addNotifier(EpgSettingsChanged)
config.epg.maxdays = ConfigSelectionNumber(min = 1, max = 28, stepwidth = 1, default = 5, wraparound = True)
def EpgmaxdaysChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgmaxdays(config.epg.maxdays.getValue())
config.epg.maxdays.addNotifier(EpgmaxdaysChanged)
config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
def EpgHistorySecondsChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)
def setHDDStandby(configElement):
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(int(configElement.value))
config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)
if SystemInfo["12V_Output"]:
def set12VOutput(configElement):
Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)
config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))
config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml"))
config.network = ConfigSubsection()
if SystemInfo["WakeOnLAN"]:
def wakeOnLANChanged(configElement):
if getBoxType() in ('et7000', 'et7500', 'gbx1', 'gbx3', 'et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbultraue', 'gbultrase', 'gbipbox', 'quadbox2400', 'mutant2400', 'et7x00', 'et8500', 'et8500s'):
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
else:
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")
config.network.wol = ConfigYesNo(default = False)
config.network.wol.addNotifier(wakeOnLANChanged)
config.network.Inadyn_autostart = ConfigYesNo(default = False)
config.network.OpenVPN_autostart = ConfigYesNo(default = False)
config.seek = ConfigSubsection()
config.seek.selfdefined_13 = ConfigNumber(default=15)
config.seek.selfdefined_46 = ConfigNumber(default=60)
config.seek.selfdefined_79 = ConfigNumber(default=300)
config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.on_pause = ConfigSelection(default = "play", choices = [
("play", _("Play")),
("step", _("Single step (GOP)")),
("last", _("Last speed")) ])
config.crash = ConfigSubsection()
config.crash.details = ConfigYesNo(default = False)
debugpath = [('/home/root/logs/', '/home/root/')]
for p in harddiskmanager.getMountedPartitions():
if os.path.exists(p.mountpoint):
d = os.path.normpath(p.mountpoint)
if p.mountpoint != '/':
debugpath.append((p.mountpoint + 'logs/', d))
config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath)
if not os.path.exists("/home"):
os.mkdir("/home",0755)
if not os.path.exists("/home/root"):
os.mkdir("/home/root",0755)
def updatedebug_path(configElement):
if not os.path.exists(config.crash.debug_path.value):
try:
os.mkdir(config.crash.debug_path.value,0755)
except:
print "Failed to create log path: %s" % config.crash.debug_path.value
config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False)
crashlogheader = "We are really sorry. Your receiver encountered " \
"a software problem, and needs to be restarted.\n" \
"Please send the logfile %senigma2_crash_xxxxxx.log to http://openspa.info.\n" \
"Your receiver restarts in 10 seconds!\n" \
"Component: enigma2" % config.crash.debug_path.value
config.crash.debug_text = ConfigText(default=_(crashlogheader), fixed_size=False)
config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])
def updateEnterForward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_forward, configElement.value)
config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)
def updateEnterBackward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_backward, configElement.value)
config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)
def updateEraseSpeed(el):
eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
def updateEraseFlags(el):
eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
config.misc.erase_speed = ConfigSelection(default="20", choices = [
("10", "10 MB/s"),
("20", "20 MB/s"),
("50", "50 MB/s"),
("100", "100 MB/s")])
config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
config.misc.erase_flags = ConfigSelection(default="1", choices = [
("0", _("Disable")),
("1", _("Internal hdd only")),
("3", _("Everywhere"))])
config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)
if SystemInfo["ZapMode"]:
def setZapmode(el):
open(SystemInfo["ZapMode"], "w").write(el.value)
config.misc.zapmode = ConfigSelection(default = "mute", choices = [
("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)
config.subtitles = ConfigSubsection()
config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("original")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
config.subtitles.colourise_dialogs = ConfigYesNo(default = False)
config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40")
config.subtitles.showbackground = ConfigYesNo(default = False)
subtitle_delay_choicelist = []
for i in range(-900000, 1845000, 45000):
if i == 0:
subtitle_delay_choicelist.append(("0", _("No delay")))
else:
subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.)))
config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = True)
config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
("0", _("No transparency")),
("25", "10%"),
("50", "20%"),
("75", "30%"),
("100", "40%"),
("125", "50%"),
("150", "60%"),
("175", "70%"),
("200", "80%"),
("225", "90%"),
("255", _("Full transparency"))])
config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("alternative")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True)
config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
("1", _("Original")),
("23976", _("23.976")),
("24000", _("24")),
("25000", _("25")),
("29970", _("29.97")),
("30000", _("30"))])
config.subtitles.pango_autoturnon = ConfigYesNo(default = True)
config.autolanguage = ConfigSubsection()
audio_language_choices=[
("---", _("None")),
("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
("ara", _("Arabic")),
("eus baq", _("Basque")),
("bul", _("Bulgarian")),
("hrv", _("Croatian")),
("ces cze", _("Czech")),
("dan", _("Danish")),
("dut ndl", _("Dutch")),
("eng qaa", _("English")),
("est", _("Estonian")),
("fin", _("Finnish")),
("fra fre", _("French")),
("deu ger", _("German")),
("ell gre", _("Greek")),
("heb", _("Hebrew")),
("hun", _("Hungarian")),
("ita", _("Italian")),
("lav", _("Latvian")),
("lit", _("Lithuanian")),
("ltz", _("Luxembourgish")),
("nor", _("Norwegian")),
("pol", _("Polish")),
("por", _("Portuguese")),
("fas per", _("Persian")),
("ron rum", _("Romanian")),
("rus", _("Russian")),
("srp", _("Serbian")),
("slk slo", _("Slovak")),
("slv", _("Slovenian")),
("spa", _("Spanish")),
("swe", _("Swedish")),
("tha", _("Thai")),
("tur Audio_TUR", _("Turkish"))]
def setEpgLanguage(configElement):
eServiceEvent.setEPGLanguage(configElement.value)
config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
def setEpgLanguageAlternative(configElement):
eServiceEvent.setEPGLanguageAlternative(configElement.value)
config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)
config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False)
config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
config.autolanguage.audio_usecache = ConfigYesNo(default = True)
subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)
config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [
("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"),
("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"),
("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"),
("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))])
config.streaming = ConfigSubsection()
config.streaming.stream_ecm = ConfigYesNo(default = False)
config.streaming.descramble = ConfigYesNo(default = True)
config.streaming.descramble_client = ConfigYesNo(default = False)
config.streaming.stream_eit = ConfigYesNo(default = True)
config.streaming.stream_ait = ConfigYesNo(default = True)
config.streaming.authentication = ConfigYesNo(default = False)
#config.osd = ConfigSubsection()
config.osd.dst_left = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 720, wraparound = False)
config.osd.dst_width = ConfigSelectionNumber(default = 720, stepwidth = 1, min = 0, max = 720, wraparound = False)
config.osd.dst_top = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 576, wraparound = False)
config.osd.dst_height = ConfigSelectionNumber(default = 576, stepwidth = 1, min = 0, max = 576, wraparound = False)
config.osd.alpha = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
config.osd.alpha_teletext = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
config.osd.alpha_webbrowser = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
config.av.osd_alpha = NoSave(ConfigNumber(default = 255))
config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")),("topandbottom", _("Top and Bottom"))], "auto")
config.osd.threeDznorm = ConfigSlider(default = 50, increment = 1, limits = (0, 100))
config.osd.show3dextensions = ConfigYesNo(default = False)
choiceoptions = [("mode1", _("Mode 1")), ("mode2", _("Mode 2"))]
config.osd.threeDsetmode = ConfigSelection(default = 'mode1' , choices = choiceoptions )
def InitUsageConfig():
config.usage = ConfigSubsection()
config.usage.subnetwork = ConfigYesNo(default=True)
config.usage.subnetwork_cable = ConfigYesNo(default=True)
config.usage.subnetwork_terrestrial = ConfigYesNo(default=True)
config.usage.showdish = ConfigYesNo(default=True)
config.misc.showrotorposition = ConfigSelection(
default='no',
choices=[('no', _('no')), ('yes', _('yes')),
('withtext', _('with text')),
('tunername', _('with tuner name'))])
config.usage.multibouquet = ConfigYesNo(default=True)
config.usage.alternative_number_mode = ConfigYesNo(default=True)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(
alternativeNumberModeChange)
config.usage.hide_number_markers = ConfigYesNo(default=True)
config.usage.hide_number_markers.addNotifier(refreshServiceList)
config.usage.servicetype_icon_mode = ConfigSelection(
default='0',
choices=[('0', _('None')), ('1', _('Left from servicename')),
('2', _('Right from servicename'))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(
default='0',
choices=[('0', _('None')), ('1', _('Left from servicename')),
('2', _('Right from servicename'))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(
default='0',
choices=[('0', _('None')), ('1', _('Left from servicename')),
('2', _('Right from servicename')), ('3', _('Red colored'))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [('-1', _('Disable'))]
for i in range(0, 1300, 100):
choicelist.append(
(str(i), ngettext('%d pixel wide', '%d pixels wide', i) % i))
config.usage.servicelist_column = ConfigSelection(default='-1',
choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default=False)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(
default='standard',
choices=[('standard', _('Standard')), ('keep', _('Keep service')),
('reverseB', _('Reverse bouquet buttons')),
('keep reverseB',
_('Keep service') + ' + ' + _('Reverse bouquet buttons'))])
choicelist = [('by skin', _('As defined by the skin'))]
for i in range(5, 41):
choicelist.append(str(i))
config.usage.servicelist_number_of_services = ConfigSelection(
default='by skin', choices=choicelist)
config.usage.servicelist_number_of_services.addNotifier(refreshServiceList)
config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default=False)
config.usage.e1like_radio_mode = ConfigYesNo(default=True)
choicelist = [('0', _('No timeout'))]
for i in range(1, 20):
choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))
config.usage.infobar_timeout = ConfigSelection(default='5',
choices=choicelist)
config.usage.show_infobar_do_dimming = ConfigYesNo(default=True)
config.usage.show_infobar_dimming_speed = ConfigSelectionNumber(
min=1, max=40, stepwidth=1, default=40, wraparound=True)
config.usage.show_infobar_on_zap = ConfigYesNo(default=True)
config.usage.show_infobar_on_skip = ConfigYesNo(default=True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default=False)
config.usage.show_second_infobar = ConfigSelection(
default=5,
choices=[("", _('None'))] + choicelist + [('EPG', _('EPG'))])
config.usage.show_simple_second_infobar = ConfigYesNo(default=True)
config.usage.infobar_frontend_source = ConfigSelection(
default='settings',
choices=[('settings', _('Settings')), ('tuner', _('Tuner'))])
config.usage.oldstyle_zap_controls = ConfigYesNo(default=False)
config.usage.oldstyle_channel_select_controls = ConfigYesNo(default=False)
config.usage.zap_with_ch_buttons = ConfigYesNo(default=False)
config.usage.ok_is_channelselection = ConfigYesNo(default=False)
config.usage.volume_instead_of_channelselection = ConfigYesNo(
default=False)
config.usage.channelselection_preview = ConfigYesNo(default=False)
config.usage.show_spinner = ConfigYesNo(default=True)
config.usage.menu_sort_weight = ConfigDictionarySet(
default={'mainmenu': {
'submenu': {}
}})
config.usage.menu_sort_mode = ConfigSelection(
default='default',
choices=[('a_z', _('alphabetical')), ('default', _('Default')),
('user', _('user defined'))])
config.usage.menu_show_numbers = ConfigYesNo(default=False)
config.usage.menu_path = ConfigSelection(default='off',
choices=[('off', _('Disabled')),
('small', _('Small')),
('large', _('Large'))])
config.usage.enable_tt_caching = ConfigYesNo(default=True)
choicelist = []
for i in (10, 30):
choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append((str(i), ngettext('%d hour', '%d hours', h) % h))
config.usage.hdd_standby = ConfigSelection(
default='300', choices=[('0', _('No standby'))] + choicelist)
config.usage.output_12V = ConfigSelection(default='do not change',
choices=[('do not change',
_('Do not change')),
('off', _('Off')),
('on', _('On'))])
config.usage.pip_zero_button = ConfigSelection(
default='standard',
choices=[('standard', _('Standard')),
('swap', _('Swap PiP and main picture')),
('swapstop', _('Move PiP to main picture')),
('stop', _('Stop PiP'))])
config.usage.pip_hideOnExit = ConfigSelection(default='without popup',
choices=[('no', _('No')),
('popup',
_('With popup')),
('without popup',
_('Without popup'))
])
choicelist = [('-1', _('Disabled')), ('0', _('No timeout'))]
for i in [60, 300, 600, 900, 1800, 2700, 3600]:
m = i / 60
choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default='0',
choices=choicelist)
config.usage.default_path = ConfigText(default='')
config.usage.timer_path = ConfigText(default='<default>')
config.usage.instantrec_path = ConfigText(default='<default>')
config.usage.timeshift_path = ConfigText(default='/media/hdd/')
config.usage.allowed_timeshift_paths = ConfigLocations(
default=['/media/hdd/'])
config.ncaminfo = ConfigSubsection()
config.ncaminfo.showInExtensions = ConfigYesNo(default=False)
config.ncaminfo.userdatafromconf = ConfigYesNo(default=False)
config.ncaminfo.autoupdate = ConfigYesNo(default=False)
config.ncaminfo.username = ConfigText(default='username',
fixed_size=False,
visible_width=12)
config.ncaminfo.password = ConfigPassword(default='password',
fixed_size=False)
config.ncaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True)
config.ncaminfo.port = ConfigInteger(default=8181, limits=(0, 65536))
config.ncaminfo.intervall = ConfigSelectionNumber(min=1,
max=600,
stepwidth=1,
default=10,
wraparound=True)
config.oscaminfo = ConfigSubsection()
config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
config.oscaminfo.userdatafromconf = ConfigYesNo(default=False)
config.oscaminfo.autoupdate = ConfigYesNo(default=False)
config.oscaminfo.username = ConfigText(default='username',
fixed_size=False,
visible_width=12)
config.oscaminfo.password = ConfigPassword(default='password',
fixed_size=False)
config.oscaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True)
config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536))
config.oscaminfo.intervall = ConfigSelectionNumber(min=1,
max=600,
stepwidth=1,
default=10,
wraparound=True)
SystemInfo['OScamInstalled'] = False
config.cccaminfo = ConfigSubsection()
config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
config.cccaminfo.serverNameLength = ConfigSelectionNumber(min=10,
max=100,
stepwidth=1,
default=22,
wraparound=True)
config.cccaminfo.name = ConfigText(default='Profile', fixed_size=False)
config.cccaminfo.ip = ConfigText(default='192.168.2.12', fixed_size=False)
config.cccaminfo.username = ConfigText(default='', fixed_size=False)
config.cccaminfo.password = ConfigText(default='', fixed_size=False)
config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
config.cccaminfo.profile = ConfigText(default='', fixed_size=False)
config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min=1,
max=10,
stepwidth=1,
default=5,
wraparound=True)
config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
config.cccaminfo.blacklist = ConfigText(
default='/media/cf/CCcamInfo.blacklisted', fixed_size=False)
config.cccaminfo.profiles = ConfigText(
default='/media/cf/CCcamInfo.profiles', fixed_size=False)
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_days = ConfigNumber(default=8)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(
default='resume',
choices=[
('ask yes', _('Ask user') + ' ' + _('default') + ' ' + _('yes')),
('ask no', _('Ask user') + ' ' + _('default') + ' ' + _('no')),
('resume', _('Resume from last position')),
('beginning', _('Start from the beginning'))
])
config.usage.on_movie_stop = ConfigSelection(
default='movielist',
choices=[('ask', _('Ask user')),
('movielist', _('Return to movie list')),
('quit', _('Return to previous service'))])
config.usage.on_movie_eof = ConfigSelection(
default='movielist',
choices=[('ask', _('Ask user')),
('movielist', _('Return to movie list')),
('quit', _('Return to previous service')),
('pause', _('Pause movie at end')),
('playlist', _('Play next (return to movie list)')),
('playlistquit', _('Play next (return to previous service)')),
('loop', _('Continues play (loop)')),
('repeatcurrent', _('Repeat'))])
config.usage.next_movie_msg = ConfigYesNo(default=True)
config.usage.last_movie_played = ConfigText()
config.usage.leave_movieplayer_onExit = ConfigSelection(
default='popup',
choices=[('no', _('No')), ('popup', _('With popup')),
('without popup', _('Without popup')),
('movielist', _('Return to movie list'))])
config.usage.setup_level = ConfigSelection(default='expert',
choices=[
('simple', _('Normal')),
('intermediate',
_('Advanced')),
('expert', _('Expert'))
])
config.usage.startup_to_standby = ConfigSelection(
default='no',
choices=[('no', _('No')), ('yes', _('Yes')),
('except', _('No, except Wakeup timer'))])
config.usage.wakeup_menu = ConfigNothing()
config.usage.wakeup_enabled = ConfigYesNo(default=False)
config.usage.wakeup_day = ConfigSubDict()
config.usage.wakeup_time = ConfigSubDict()
for i in range(7):
config.usage.wakeup_day[i] = ConfigEnableDisable(default=False)
config.usage.wakeup_time[i] = ConfigClock(default=21600)
choicelist = [('0', _('Do nothing'))]
for i in range(3600, 21601, 3600):
h = abs(i / 3600)
h = ngettext('%d hour', '%d hours', h) % h
choicelist.append((str(i), _('Standby in ') + h))
config.usage.inactivity_timer = ConfigSelection(default='0',
choices=choicelist)
config.usage.inactivity_timer_blocktime = ConfigYesNo(default=True)
config.usage.inactivity_timer_blocktime_begin = ConfigClock(
default=time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end = ConfigClock(
default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default=False)
config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(
default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(
default=time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
choicelist = [('0', _('Disabled')),
('event_standby', _('Standby after current event'))]
for i in range(900, 7201, 900):
m = abs(i / 60)
m = ngettext('%d minute', '%d minutes', m) % m
choicelist.append((str(i), _('Standby in ') + m))
config.usage.sleep_timer = ConfigSelection(default='0', choices=choicelist)
choicelist = [('0', _('Disabled'))]
for i in [300, 300, 600] + range(900, 7201, 900):
m = abs(i / 60)
m = ngettext('%d minute', '%d minutes', m) % m
choicelist.append((str(i), _('after ') + m))
config.usage.standby_to_shutdown_timer = ConfigSelection(
default='0', choices=choicelist)
config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(
default=True)
config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(
default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(
default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [('0', _('Disabled'))]
for m in (1, 5, 10, 15, 30, 60):
choicelist.append(
(str(m * 60), ngettext('%d minute', '%d minutes', m) % m))
config.usage.screen_saver = ConfigSelection(default='300',
choices=choicelist)
config.usage.check_timeshift = ConfigYesNo(default=True)
choicelist = [('0', _('Disabled'))]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))
config.usage.timeshift_start_delay = ConfigSelection(default='0',
choices=choicelist)
config.usage.alternatives_priority = ConfigSelection(
default='0',
choices=[('0', 'DVB-S/-C/-T'), ('1', 'DVB-S/-T/-C'),
('2', 'DVB-C/-S/-T'), ('3', 'DVB-C/-T/-S'),
('4', 'DVB-T/-C/-S'), ('5', 'DVB-T/-S/-C'),
('127', _('No priority'))])
config.usage.remote_fallback_enabled = ConfigYesNo(default=False)
config.usage.remote_fallback = ConfigText(default='', fixed_size=False)
config.usage.show_timer_conflict_warning = ConfigYesNo(default=True)
dvbs_nims = [('-2', _('Disabled'))]
dvbt_nims = [('-2', _('Disabled'))]
dvbc_nims = [('-2', _('Disabled'))]
atsc_nims = [('-2', _('Disabled'))]
nims = [('-1', _('auto'))]
for x in nimmanager.nim_slots:
if x.isCompatible('DVB-S'):
dvbs_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible('DVB-T'):
dvbt_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible('DVB-C'):
dvbc_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible('ATSC'):
atsc_nims.append((str(x.slot), x.getSlotName()))
nims.append((str(x.slot), x.getSlotName()))
config.usage.frontend_priority = ConfigSelection(default='-1',
choices=list(nims))
nims.insert(0, ('-2', _('Disabled')))
config.usage.recording_frontend_priority = ConfigSelection(default='-2',
choices=nims)
config.usage.frontend_priority_dvbs = ConfigSelection(
default='-2', choices=list(dvbs_nims))
dvbs_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_dvbs = ConfigSelection(
default='-2', choices=dvbs_nims)
config.usage.frontend_priority_dvbt = ConfigSelection(
default='-2', choices=list(dvbt_nims))
dvbt_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_dvbt = ConfigSelection(
default='-2', choices=dvbt_nims)
config.usage.frontend_priority_dvbc = ConfigSelection(
default='-2', choices=list(dvbc_nims))
dvbc_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_dvbc = ConfigSelection(
default='-2', choices=dvbc_nims)
config.usage.frontend_priority_atsc = ConfigSelection(
default="-2", choices=list(atsc_nims))
atsc_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_atsc = ConfigSelection(
default='-2', choices=atsc_nims)
SystemInfo['DVB-S_priority_tuner_available'] = len(dvbs_nims) > 3 and any(
len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims))
SystemInfo['DVB-T_priority_tuner_available'] = len(dvbt_nims) > 3 and any(
len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims))
SystemInfo['DVB-C_priority_tuner_available'] = len(dvbc_nims) > 3 and any(
len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims))
SystemInfo['ATSC_priority_tuner_available'] = len(atsc_nims) > 3 and any(
len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims))
config.misc.disable_background_scan = ConfigYesNo(default=False)
config.usage.show_event_progress_in_servicelist = ConfigSelection(
default='barright',
choices=[('barleft', _('Progress bar left')),
('barright', _('Progress bar right')),
('percleft', _('Percentage left')),
('percright', _('Percentage right')), ('no', _('No'))])
config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(
default=True)
config.usage.show_event_progress_in_servicelist.addNotifier(
refreshServiceList)
config.usage.show_channel_numbers_in_servicelist.addNotifier(
refreshServiceList)
config.usage.blinking_display_clock_during_recording = ConfigYesNo(
default=False)
config.usage.show_message_when_recording_starts = ConfigYesNo(default=True)
config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(
default=True)
config.usage.show_icons_in_movielist = ConfigSelection(
default='i',
choices=[('o', _('Off')), ('p', _('Progress')),
('s', _('Small progress')), ('i', _('Icons'))])
config.usage.movielist_unseen = ConfigYesNo(default=False)
config.usage.swap_snr_on_osd = ConfigYesNo(default=False)
def SpinnerOnOffChanged(configElement):
setSpinnerOnOff(int(configElement.value))
config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)
def EnableTtCachingChanged(configElement):
setEnableTtCachingOnOff(int(configElement.value))
config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)
def TunerTypePriorityOrderChanged(configElement):
setTunerTypePriorityOrder(int(configElement.value))
config.usage.alternatives_priority.addNotifier(
TunerTypePriorityOrderChanged, immediate_feedback=False)
def PreferredTunerChanged(configElement):
setPreferredTuner(int(configElement.value))
config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
config.usage.hide_zap_errors = ConfigYesNo(default=False)
config.usage.hide_ci_messages = ConfigYesNo(default=True)
config.usage.show_cryptoinfo = ConfigYesNo(default=True)
config.usage.show_eit_nownext = ConfigYesNo(default=True)
config.usage.show_vcr_scart = ConfigYesNo(default=False)
config.usage.show_update_disclaimer = ConfigYesNo(default=True)
config.usage.pic_resolution = ConfigSelection(
default=None,
choices=[
(None, _('Same resolution as skin')), ('(720, 576)', '720x576'),
('(1280, 720)', '1280x720'), ('(1920, 1080)', '1920x1080')
][:SystemInfo['HasFullHDSkinSupport'] and 4 or 3])
if SystemInfo['Fan']:
choicelist = [('off', _('Off')), ('on', _('On')), ('auto', _('Auto'))]
if os.path.exists('/proc/stb/fp/fan_choices'):
choicelist = [
x for x in choicelist if x[0] in open(
'/proc/stb/fp/fan_choices', 'r').read().strip().split(' ')
]
config.usage.fan = ConfigSelection(choicelist)
def fanChanged(configElement):
open(SystemInfo['Fan'], 'w').write(configElement.value)
config.usage.fan.addNotifier(fanChanged)
if SystemInfo['FanPWM']:
def fanSpeedChanged(configElement):
open(SystemInfo['FanPWM'], 'w').write(hex(configElement.value)[2:])
config.usage.fanspeed = ConfigSlider(default=127,
increment=8,
limits=(0, 255))
config.usage.fanspeed.addNotifier(fanSpeedChanged)
if SystemInfo['StandbyLED']:
def standbyLEDChanged(configElement):
open(SystemInfo['StandbyLED'],
'w').write(configElement.value and 'on' or 'off')
config.usage.standbyLED = ConfigYesNo(default=True)
config.usage.standbyLED.addNotifier(standbyLEDChanged)
if SystemInfo["PowerOffDisplay"]:
def powerOffDisplayChanged(configElement):
open(SystemInfo["PowerOffDisplay"],
"w").write(configElement.value and "1" or "0")
config.usage.powerOffDisplay = ConfigYesNo(default=True)
config.usage.powerOffDisplay.addNotifier(powerOffDisplayChanged)
if SystemInfo['WakeOnLAN']:
def wakeOnLANChanged(configElement):
if 'fp' in SystemInfo['WakeOnLAN']:
open(SystemInfo['WakeOnLAN'],
'w').write(configElement.value and 'enable' or 'disable')
else:
open(SystemInfo['WakeOnLAN'],
'w').write(configElement.value and 'on' or 'off')
config.usage.wakeOnLAN = ConfigYesNo(default=False)
config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged)
if SystemInfo["hasXcoreVFD"]:
def set12to8characterVFD(configElement):
open(SystemInfo["hasXcoreVFD"],
"w").write(not configElement.value and "1" or "0")
config.usage.toggle12to8characterVFD = ConfigYesNo(default=False)
config.usage.toggle12to8characterVFD.addNotifier(set12to8characterVFD)
if SystemInfo["LcdLiveTVMode"]:
def setLcdLiveTVMode(configElement):
open(SystemInfo["LcdLiveTVMode"], "w").write(configElement.value)
config.usage.LcdLiveTVMode = ConfigSelection(
default="0", choices=[str(x) for x in range(0, 9)])
config.usage.LcdLiveTVMode.addNotifier(setLcdLiveTVMode)
config.epg = ConfigSubsection()
config.epg.eit = ConfigYesNo(default=True)
config.epg.mhw = ConfigYesNo(default=False)
config.epg.freesat = ConfigYesNo(default=True)
config.epg.viasat = ConfigYesNo(default=True)
config.epg.netmed = ConfigYesNo(default=True)
config.epg.virgin = ConfigYesNo(default=False)
config.misc.showradiopic = ConfigYesNo(default=True)
def EpgSettingsChanged(configElement):
from enigma import eEPGCache
mask = 4294967295L
if not config.epg.eit.value:
mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE
| eEPGCache.SCHEDULE_OTHER)
if not config.epg.mhw.value:
mask &= ~eEPGCache.MHW
if not config.epg.freesat.value:
mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE
| eEPGCache.FREESAT_SCHEDULE_OTHER)
if not config.epg.viasat.value:
mask &= ~eEPGCache.VIASAT
if not config.epg.netmed.value:
mask &= ~(eEPGCache.NETMED_SCHEDULE
| eEPGCache.NETMED_SCHEDULE_OTHER)
if not config.epg.virgin.value:
mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
eEPGCache.getInstance().setEpgSources(mask)
config.epg.eit.addNotifier(EpgSettingsChanged)
config.epg.mhw.addNotifier(EpgSettingsChanged)
config.epg.freesat.addNotifier(EpgSettingsChanged)
config.epg.viasat.addNotifier(EpgSettingsChanged)
config.epg.netmed.addNotifier(EpgSettingsChanged)
config.epg.virgin.addNotifier(EpgSettingsChanged)
config.epg.histminutes = ConfigSelectionNumber(min=0,
max=120,
stepwidth=15,
default=0,
wraparound=True)
def EpgHistorySecondsChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgHistorySeconds(
config.epg.histminutes.getValue() * 60)
config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)
def setHDDStandby(configElement):
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(int(configElement.value))
config.usage.hdd_standby.addNotifier(setHDDStandby,
immediate_feedback=False)
if SystemInfo['12V_Output']:
def set12VOutput(configElement):
Misc_Options.getInstance().set_12V_output(
configElement.value == 'on' and 1 or 0)
config.usage.output_12V.addNotifier(set12VOutput,
immediate_feedback=False)
config.usage.keymap = ConfigText(
default=eEnv.resolve('${datadir}/enigma2/keymap.xml'))
config.usage.keytrans = ConfigText(
default=eEnv.resolve('${datadir}/enigma2/keytranslation.xml'))
config.seek = ConfigSubsection()
config.seek.selfdefined_13 = ConfigNumber(default=15)
config.seek.selfdefined_46 = ConfigNumber(default=60)
config.seek.selfdefined_79 = ConfigNumber(default=300)
config.seek.speeds_forward = ConfigSet(
default=[2, 4, 8, 16, 32, 64, 128],
choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_backward = ConfigSet(
default=[2, 4, 8, 16, 32, 64, 128],
choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8],
choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default='2',
choices=[
'2', '4', '6', '8', '12',
'16', '24', '32', '48',
'64', '96', '128'
])
config.seek.enter_backward = ConfigSelection(default='1',
choices=[
'1', '2', '4', '6', '8',
'12', '16', '24', '32',
'48', '64', '96', '128'
])
config.seek.on_pause = ConfigSelection(default='play',
choices=[('play', _('Play')),
('step',
_('Single step (GOP)')),
('last', _('Last speed'))])
config.usage.timerlist_finished_timer_position = ConfigSelection(
default='end',
choices=[('beginning', _('At beginning')), ('end', _('At end'))])
def updateEnterForward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_forward, configElement.value)
config.seek.speeds_forward.addNotifier(updateEnterForward,
immediate_feedback=False)
def updateEnterBackward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_backward, configElement.value)
config.seek.speeds_backward.addNotifier(updateEnterBackward,
immediate_feedback=False)
def updateEraseSpeed(el):
eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
def updateEraseFlags(el):
eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
config.misc.erase_speed = ConfigSelection(default="20",
choices=[("10", _("10 MB/s")),
("20", _("20 MB/s")),
("50", _("50 MB/s")),
("100", _("100 MB/s"))])
config.misc.erase_speed.addNotifier(updateEraseSpeed,
immediate_feedback=False)
config.misc.erase_flags = ConfigSelection(default='1',
choices=[
('0', _('Disable')),
('1',
_('Internal hdd only')),
('3', _('Everywhere'))
])
config.misc.erase_flags.addNotifier(updateEraseFlags,
immediate_feedback=False)
if SystemInfo['ZapMode']:
def setZapmode(el):
open(SystemInfo['ZapMode'], 'w').write(el.value)
config.misc.zapmode = ConfigSelection(
default='mute',
choices=[('mute', _('Black screen')), ('hold', _('Hold screen')),
('mutetilllock', _('Black screen till locked')),
('holdtilllock', _('Hold till locked'))])
config.misc.zapmode.addNotifier(setZapmode, immediate_feedback=False)
config.usage.historymode = ConfigSelection(default='1',
choices=[('0', _('Just zap')),
('1', _('Show menu'))])
if SystemInfo['VFD_scroll_repeats']:
def scroll_repeats(el):
open(SystemInfo['VFD_scroll_repeats'], 'w').write(el.value)
choicelist = []
for i in range(1, 11, 1):
choicelist.append(str(i))
config.usage.vfd_scroll_repeats = ConfigSelection(default='3',
choices=choicelist)
config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats,
immediate_feedback=False)
if SystemInfo['VFD_scroll_delay']:
def scroll_delay(el):
open(SystemInfo['VFD_scroll_delay'], 'w').write(el.value)
choicelist = []
for i in range(0, 1001, 50):
choicelist.append(str(i))
config.usage.vfd_scroll_delay = ConfigSelection(default='150',
choices=choicelist)
config.usage.vfd_scroll_delay.addNotifier(scroll_delay,
immediate_feedback=False)
if SystemInfo['VFD_initial_scroll_delay']:
def initial_scroll_delay(el):
open(SystemInfo['VFD_initial_scroll_delay'], 'w').write(el.value)
choicelist = []
for i in range(0, 20001, 500):
choicelist.append(str(i))
config.usage.vfd_initial_scroll_delay = ConfigSelection(
default='1000', choices=choicelist)
config.usage.vfd_initial_scroll_delay.addNotifier(
initial_scroll_delay, immediate_feedback=False)
if SystemInfo['VFD_final_scroll_delay']:
def final_scroll_delay(el):
open(SystemInfo['VFD_final_scroll_delay'], 'w').write(el.value)
choicelist = []
for i in range(0, 20001, 500):
choicelist.append(str(i))
config.usage.vfd_final_scroll_delay = ConfigSelection(
default='1000', choices=choicelist)
config.usage.vfd_final_scroll_delay.addNotifier(
final_scroll_delay, immediate_feedback=False)
if SystemInfo['HasForceLNBOn']:
def forceLNBPowerChanged(configElement):
open(SystemInfo['HasForceLNBOn'], 'w').write(configElement.value)
config.misc.forceLnbPower = ConfigSelection(default='on',
choices=[('on', _('Yes')),
('off', _('No'))])
config.misc.forceLnbPower.addNotifier(forceLNBPowerChanged)
if SystemInfo['HasForceToneburst']:
def forceToneBurstChanged(configElement):
open(SystemInfo['HasForceToneburst'],
'w').write(configElement.value)
config.misc.forceToneBurst = ConfigSelection(default='enable',
choices=[
('enable', _('Yes')),
('disable', _('No'))
])
config.misc.forceToneBurst.addNotifier(forceToneBurstChanged)
if SystemInfo['HasBypassEdidChecking']:
def setHasBypassEdidChecking(configElement):
open(SystemInfo['HasBypassEdidChecking'],
'w').write(configElement.value)
config.av.bypassEdidChecking = ConfigSelection(default='00000000',
choices=[('00000001',
_('Yes')),
('00000000',
_('No'))])
config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking)
if SystemInfo['HasColorspace']:
def setHaveColorspace(configElement):
open(SystemInfo['HasColorspace'], 'w').write(configElement.value)
if SystemInfo['HasColorspaceSimple']:
config.av.hdmicolorspace = ConfigSelection(default='Edid(Auto)',
choices={
'Edid(Auto)':
_('Auto'),
'Hdmi_Rgb': _('RGB')
})
else:
config.av.hdmicolorspace = ConfigSelection(default='auto',
choices={
'auto': _('auto'),
'rgb': _('rgb'),
'420': _('420'),
'422': _('422'),
'444': _('444')
})
config.av.hdmicolorspace.addNotifier(setHaveColorspace)
config.subtitles = ConfigSubsection()
config.subtitles.ttx_subtitle_colors = ConfigSelection(
default='1',
choices=[('0', _('original')), ('1', _('white')), ('2', _('yellow'))])
config.subtitles.ttx_subtitle_original_position = ConfigYesNo(
default=False)
config.subtitles.subtitle_position = ConfigSelection(choices=[
'0', '10', '20', '30', '40', '50', '60', '70', '80', '90', '100',
'150', '200', '250', '300', '350', '400', '450'
],
default='50')
config.subtitles.subtitle_alignment = ConfigSelection(choices=[
('left', _('left')), ('center', _('center')), ('right', _('right'))
],
default='center')
config.subtitles.subtitle_rewrap = ConfigYesNo(default=False)
config.subtitles.colourise_dialogs = ConfigYesNo(default=False)
config.subtitles.subtitle_borderwidth = ConfigSelection(
choices=['1', '2', '3', '4', '5'], default='3')
config.subtitles.subtitle_fontsize = ConfigSelection(
choices=['%d' % x for x in range(16, 101) if not x % 2], default='40')
config.subtitles.showbackground = ConfigYesNo(default=False)
subtitle_delay_choicelist = []
for i in range(-900000, 1845000, 45000):
if i == 0:
subtitle_delay_choicelist.append(('0', _('No delay')))
else:
subtitle_delay_choicelist.append(
(str(i), _("%2.1f sec") % (i / 90000.)))
config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(
default='315000', choices=subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default=False)
config.subtitles.dvb_subtitles_original_position = ConfigSelection(
default='0',
choices=[('0', _('Original')), ('1', _('Fixed')),
('2', _('Relative'))])
config.subtitles.dvb_subtitles_centered = ConfigYesNo(default=False)
config.subtitles.subtitle_bad_timing_delay = ConfigSelection(
default='0', choices=subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_backtrans = ConfigSelection(
default='0',
choices=[('0', _('No transparency')), ('25', '10%'), ('50', '20%'),
('75', '30%'), ('100', '40%'), ('125', '50%'), ('150', '60%'),
('175', '70%'), ('200', '80%'), ('225', '90%'),
('255', _('Full transparency'))])
config.subtitles.pango_subtitle_colors = ConfigSelection(
default='1',
choices=[('0', _('alternative')), ('1', _('white')),
('2', _('yellow'))])
config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default=True)
config.subtitles.pango_subtitles_delay = ConfigSelection(
default='0', choices=subtitle_delay_choicelist)
config.subtitles.pango_subtitles_fps = ConfigSelection(
default='1',
choices=[('1', _('Original')), ('23976', _('23.976')),
('24000', _('24')), ('25000', _('25')), ('29970', _('29.97')),
('30000', _('30'))])
config.subtitles.pango_autoturnon = ConfigYesNo(default=True)
config.autolanguage = ConfigSubsection()
audio_language_choices = [
('---', _('None')),
('orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ',
_('Original')), ('ara', _('Arabic')), ('eus baq', _('Basque')),
('bul', _('Bulgarian')),
('hrv', _('Croatian')), ('ces cze', _('Czech')), ('dan', _('Danish')),
('dut ndl', _('Dutch')), ('eng qaa', _('English')),
('est', _('Estonian')), ('fin', _('Finnish')),
('fra fre', _('French')), ('deu ger', _('German')),
('ell gre', _('Greek')), ('heb', _('Hebrew')), ('hun', _('Hungarian')),
('ita', _('Italian')), ('lav', _('Latvian')), ('lit', _('Lithuanian')),
('ltz', _('Luxembourgish')), ('nor', _('Norwegian')),
('pol', _('Polish')), ('por dub DUB', _('Portuguese')),
('fas per', _('Persian')), ('ron rum', _('Romanian')),
('rus', _('Russian')), ('srp', _('Serbian')), ('slk slo', _('Slovak')),
('slv', _('Slovenian')), ('spa', _('Spanish')), ('swe', _('Swedish')),
('tha', _('Thai')), ('tur Audio_TUR', _('Turkish')),
('ukr Ukr', _('Ukrainian'))
]
def setEpgLanguage(configElement):
eServiceEvent.setEPGLanguage(configElement.value)
config.autolanguage.audio_epglanguage = ConfigSelection(
audio_language_choices[:1] + audio_language_choices[2:], default='---')
config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
def setEpgLanguageAlternative(configElement):
eServiceEvent.setEPGLanguageAlternative(configElement.value)
config.autolanguage.audio_epglanguage_alternative = ConfigSelection(
audio_language_choices[:1] + audio_language_choices[2:], default='---')
config.autolanguage.audio_epglanguage_alternative.addNotifier(
setEpgLanguageAlternative)
config.autolanguage.audio_autoselect1 = ConfigSelection(
choices=audio_language_choices, default='---')
config.autolanguage.audio_autoselect2 = ConfigSelection(
choices=audio_language_choices, default='---')
config.autolanguage.audio_autoselect3 = ConfigSelection(
choices=audio_language_choices, default='---')
config.autolanguage.audio_autoselect4 = ConfigSelection(
choices=audio_language_choices, default='---')
config.autolanguage.audio_defaultac3 = ConfigYesNo(default=False)
config.autolanguage.audio_defaultddp = ConfigYesNo(default=False)
config.autolanguage.audio_usecache = ConfigYesNo(default=True)
subtitle_language_choices = audio_language_choices[:
1] + audio_language_choices[
2:]
config.autolanguage.subtitle_autoselect1 = ConfigSelection(
choices=subtitle_language_choices, default='---')
config.autolanguage.subtitle_autoselect2 = ConfigSelection(
choices=subtitle_language_choices, default='---')
config.autolanguage.subtitle_autoselect3 = ConfigSelection(
choices=subtitle_language_choices, default='---')
config.autolanguage.subtitle_autoselect4 = ConfigSelection(
choices=subtitle_language_choices, default='---')
config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default=False)
config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default=False)
config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default=False)
config.autolanguage.subtitle_usecache = ConfigYesNo(default=True)
config.autolanguage.equal_languages = ConfigSelection(default='15',
choices=[
('0', _('None')),
('1', '1'),
('2', '2'),
('3', '1,2'),
('4', '3'),
('5', '1,3'),
('6', '2,3'),
('7', '1,2,3'),
('8', '4'),
('9', '1,4'),
('10', '2,4'),
('11', '1,2,4'),
('12', '3,4'),
('13', '1,3,4'),
('14', '2,3,4'),
('15', _('All'))
])
config.streaming = ConfigSubsection()
config.streaming.stream_ecm = ConfigYesNo(default=False)
config.streaming.descramble = ConfigYesNo(default=True)
config.streaming.descramble_client = ConfigYesNo(default=False)
config.streaming.stream_eit = ConfigYesNo(default=True)
config.streaming.stream_ait = ConfigYesNo(default=True)
config.streaming.authentication = ConfigYesNo(default=False)
config.mediaplayer = ConfigSubsection()
config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False)
config.mediaplayer.alternateUserAgent = ConfigText(default='')
def InitUsageConfig():
config.misc.useNTPminutes = ConfigSelection(default="30", choices=[("30", "30" + " " + _("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))])
if getBrandOEM() in ('vuplus'):
config.misc.remotecontrol_text_support = ConfigYesNo(default=True)
else:
config.misc.remotecontrol_text_support = ConfigYesNo(default=False)
config.usage = ConfigSubsection()
config.usage.showdish = ConfigSelection(default="flashing", choices=[("flashing", _("Flashing")), ("normal", _("Not Flashing")), ("off", _("Off"))])
config.usage.multibouquet = ConfigYesNo(default=True)
config.usage.alternative_number_mode = ConfigYesNo(default=True)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
config.usage.servicetype_icon_mode = ConfigSelection(default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(default="3", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [("-1", _("Disable"))]
for i in range(0, 1300, 100):
choicelist.append(("%d" % i, ngettext("%d pixel wide", "%d pixels wide", i) % i))
config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default=True)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(default="keep", choices=[
("standard", _("Standard")),
("keep", _("Keep service")),
("reverseB", _("Reverse bouquet buttons")),
("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])
config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False)
# config.usage.defaultEPGType sets the guide type for
# the INFO button
config.usage.defaultEPGType = ConfigSelection(default="None", choices=[])
if config.usage.defaultEPGType.saved_value is not None:
config.usage.defaultEPGType.setChoices([config.usage.defaultEPGType.saved_value])
config.usage.defaultEPGType.load()
# config.usage.defaultGuideType sets the guide type for
# the EPG button
config.usage.defaultGuideType = ConfigSelection(default="None", choices=[])
if config.usage.defaultGuideType.saved_value is not None:
config.usage.defaultGuideType.setChoices([config.usage.defaultGuideType.saved_value])
config.usage.defaultGuideType.load()
config.usage.panicbutton = ConfigYesNo(default=False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default=False)
config.usage.e1like_radio_mode = ConfigYesNo(default=True)
choicelist = []
for i in range(1, 10) + range(10, 91, 10):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.usage.infobar_timeout = ConfigSelection(default="5", choices=[("0", _("No timeout"))] + choicelist)
config.usage.show_infobar_do_dimming = ConfigYesNo(default=True)
config.usage.show_infobar_dimming_speed = ConfigSelectionNumber(min=1, max=40, stepwidth=1, default=40, wraparound=True)
config.usage.show_infobar_on_zap = ConfigYesNo(default=True)
config.usage.show_infobar_on_skip = ConfigYesNo(default=True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default=False)
config.usage.show_infobar_channel_number = ConfigYesNo(default=False)
config.usage.show_second_infobar = ConfigYesNo(default=True)
config.usage.second_infobar_timeout = ConfigSelection(default="0", choices=[("0", _("no timeout"))] + choicelist)
config.usage.infobar_frontend_source = ConfigSelection(default="tuner", choices=[("settings", _("Settings")), ("tuner", _("Tuner"))])
config.usage.show_picon_bkgrn = ConfigSelection(default="transparent", choices=[("none", _("Disabled")), ("transparent", _("Transparent")), ("blue", _("Blue")), ("red", _("Red")), ("black", _("Black")), ("white", _("White")), ("lightgrey", _("Light Grey")), ("grey", _("Grey"))])
config.usage.show_spinner = ConfigYesNo(default=True)
config.usage.enable_tt_caching = ConfigYesNo(default=True)
config.usage.sort_settings = ConfigYesNo(default=False)
config.usage.sort_menus = ConfigYesNo(default=False)
config.usage.sort_pluginlist = ConfigYesNo(default=True)
config.usage.movieplayer_pvrstate = ConfigYesNo(default=True)
choicelist = []
for i in (10, 30):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h))
config.usage.hdd_standby = ConfigSelection(default="300", choices=[("0", _("No standby"))] + choicelist)
config.usage.output_12V = ConfigSelection(default="do not change", choices=[
("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On"))])
config.usage.pip_zero_button = ConfigSelection(default="standard", choices=[
("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP"))])
config.usage.pip_hideOnExit = ConfigSelection(default="no", choices=[
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup"))])
choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
for i in [60, 300, 600, 900, 1800, 2700, 3600]:
m = i / 60
choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default="0", choices=choicelist)
if not os.path.exists(resolveFilename(SCOPE_HDD)):
try:
os.mkdir(resolveFilename(SCOPE_HDD), 0755)
except:
pass
config.usage.default_path = ConfigText(default=resolveFilename(SCOPE_HDD))
if not config.usage.default_path.value.endswith('/'):
tmpvalue = config.usage.default_path.value
config.usage.default_path.setValue(tmpvalue + '/')
config.usage.default_path.save()
def defaultpathChanged(configElement):
if not config.usage.default_path.value.endswith('/'):
tmpvalue = config.usage.default_path.value
config.usage.default_path.setValue(tmpvalue + '/')
config.usage.default_path.save()
config.usage.default_path.addNotifier(defaultpathChanged, immediate_feedback=False)
config.usage.timer_path = ConfigText(default="<default>")
config.usage.instantrec_path = ConfigText(default="<default>")
if not os.path.exists(resolveFilename(SCOPE_TIMESHIFT)):
try:
os.mkdir(resolveFilename(SCOPE_TIMESHIFT), 0755)
except:
pass
config.usage.timeshift_path = ConfigText(default=resolveFilename(SCOPE_TIMESHIFT))
if not config.usage.default_path.value.endswith('/'):
tmpvalue = config.usage.timeshift_path.value
config.usage.timeshift_path.setValue(tmpvalue + '/')
config.usage.timeshift_path.save()
def timeshiftpathChanged(configElement):
if not config.usage.timeshift_path.value.endswith('/'):
tmpvalue = config.usage.timeshift_path.value
config.usage.timeshift_path.setValue(tmpvalue + '/')
config.usage.timeshift_path.save()
config.usage.timeshift_path.addNotifier(timeshiftpathChanged, immediate_feedback=False)
config.usage.allowed_timeshift_paths = ConfigLocations(default=[resolveFilename(SCOPE_TIMESHIFT)])
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_network_clean = ConfigYesNo(default=False)
config.usage.movielist_trashcan_days = ConfigSelectionNumber(default=8, min=1, max=31, stepwidth=1, wraparound=True)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(default="ask yes", choices=[
("ask yes", _("Ask user (with default as 'yes')")),
("ask no", _("Ask user (with default as 'no')")),
("resume", _("Resume from last position")),
("beginning", _("Start from the beginning"))])
config.usage.on_movie_stop = ConfigSelection(default="movielist", choices=[
("ask", _("Ask user")),
("movielist", _("Return to movie list")),
("quit", _("Return to previous service"))])
config.usage.on_movie_eof = ConfigSelection(default="movielist", choices=[
("ask", _("Ask user")),
("movielist", _("Return to movie list")),
("quit", _("Return to previous service")),
("pause", _("Pause movie at end")),
("playlist", _("Play next (return to movie list)")),
("playlistquit", _("Play next (return to previous service)")),
("loop", _("Continues play (loop)")),
("repeatcurrent", _("Repeat"))])
config.usage.leave_movieplayer_onExit = ConfigSelection(default="no", choices=[
("no", _("No")),
("popup", _("With popup")),
("without popup", _("Without popup"))])
config.usage.next_movie_msg = ConfigYesNo(default=True)
config.usage.last_movie_played = ConfigText()
config.usage.setup_level = ConfigSelection(default="expert", choices=[
("simple", _("Simple")),
("intermediate", _("Intermediate")),
("expert", _("Expert"))])
config.usage.help_sortorder = ConfigSelection(default="headings+alphabetic", choices=[
("headings+alphabetic", _("Alphabetical under headings")),
("flat+alphabetic", _("Flat alphabetical")),
("flat+remotepos", _("Flat by position on remote")),
("flat+remotegroups", _("Flat by key group on remote"))])
config.usage.on_long_powerpress = ConfigSelection(default="show_menu", choices=[
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby"))])
config.usage.on_short_powerpress = ConfigSelection(default="standby", choices=[
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby"))])
choicelist = [("0", "Disabled")]
for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600):
if i < 60:
m = ngettext("%d second", "%d seconds", i) % i
else:
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append(("%d" % i, m))
config.usage.screen_saver = ConfigSelection(default="0", choices=choicelist)
config.usage.check_timeshift = ConfigYesNo(default=True)
config.usage.alternatives_priority = ConfigSelection(default="5", choices=[
("0", "DVB-S/-C/-T"),
("1", "DVB-S/-T/-C"),
("2", "DVB-C/-S/-T"),
("3", "DVB-C/-T/-S"),
("4", "DVB-T/-C/-S"),
("5", "DVB-T/-S/-C"),
("127", "No priority")])
config.usage.remote_fallback_enabled = ConfigYesNo(default=False)
config.usage.remote_fallback = ConfigText(default="", fixed_size=False)
nims = [("-1", _("auto"))]
rec_nims = [("-2", _("Disabled")), ("-1", _("auto"))]
for x in nimmanager.nim_slots:
nims.append((str(x.slot), x.getSlotName()))
rec_nims.append((str(x.slot), x.getSlotName()))
try:
config.usage.frontend_priority = ConfigSelection(default="0", choices=nims)
except:
config.usage.frontend_priority = ConfigSelection(default="-1", choices=nims)
config.usage.recording_frontend_priority = ConfigSelection(default="-2", choices=rec_nims)
config.misc.disable_background_scan = ConfigYesNo(default=False)
config.usage.jobtaksextensions = ConfigYesNo(default=True)
config.usage.servicenum_fontsize = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.usage.servicename_fontsize = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.usage.serviceitems_per_page = ConfigSelectionNumber(default=10, stepwidth=1, min=3, max=40, wraparound=True)
config.usage.show_servicelist = ConfigYesNo(default=True)
config.usage.servicelist_mode = ConfigSelection(default="standard", choices=[
("standard", _("Standard")),
("simple", _("Simple"))])
config.usage.servicelistpreview_mode = ConfigYesNo(default=False)
config.usage.tvradiobutton_mode = ConfigSelection(default="BouquetList", choices=[
("ChannelList", _("Channel List")),
("BouquetList", _("Bouquet List")),
("MovieList", _("Movie List"))])
config.usage.channelbutton_mode = ConfigSelection(default="0", choices=[
("0", _("Just change channels")),
("1", _("Channel List")),
("2", _("Bouquet List"))])
config.usage.show_bouquetalways = ConfigYesNo(default=False)
config.usage.show_event_progress_in_servicelist = ConfigSelection(default='barright', choices=[
('barleft', _("Progress bar left")),
('barright', _("Progress bar right")),
('percleft', _("Percentage left")),
('percright', _("Percentage right")),
('no', _("No"))])
config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default=True)
config.usage.show_channel_jump_in_servicelist = ConfigSelection(default="alpha", choices=[
("quick", _("Quick actions")),
("alpha", _("Alpha search")),
("number", _("Number search"))])
config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)
config.usage.blinking_display_clock_during_recording = ConfigYesNo(default=False)
config.usage.show_message_when_recording_starts = ConfigYesNo(default=False)
config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default=True)
config.usage.show_icons_in_movielist = ConfigSelection(default='i', choices=[
('o', _("Off")),
('p', _("Progress")),
('s', _("Small progress")),
('i', _("Icons")),
])
config.usage.movielist_unseen = ConfigYesNo(default=True)
config.usage.swap_snr_on_osd = ConfigYesNo(default=False)
config.usage.swap_time_display_on_osd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_osd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_osd = ConfigSelection(default="0", choices=[("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_osd = ConfigYesNo(default=False)
config.usage.swap_time_display_on_vfd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_vfd = ConfigSelection(default="0", choices=[("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_vfd = ConfigSelection(default="0", choices=[("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_vfd = ConfigYesNo(default=False)
config.usage.lcd_scroll_delay = ConfigSelection(default="10000", choices=[
("10000", "10 " + _("seconds")),
("20000", "20 " + _("seconds")),
("30000", "30 " + _("seconds")),
("60000", "1 " + _("minute")),
("300000", "5 " + _("minutes")),
("noscrolling", _("off"))])
config.usage.lcd_scroll_speed = ConfigSelection(default="300", choices=[
("500", _("slow")),
("300", _("normal")),
("100", _("fast"))])
def SpinnerOnOffChanged(configElement):
setSpinnerOnOff(int(configElement.value))
config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)
def EnableTtCachingChanged(configElement):
setEnableTtCachingOnOff(int(configElement.value))
config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)
def TunerTypePriorityOrderChanged(configElement):
setTunerTypePriorityOrder(int(configElement.value))
config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)
def PreferredTunerChanged(configElement):
setPreferredTuner(int(configElement.value))
config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
config.usage.hide_zap_errors = ConfigYesNo(default=True)
config.usage.hide_ci_messages = ConfigYesNo(default=True)
config.usage.show_cryptoinfo = ConfigSelection(default="0", choices=[("0", _("Off")), ("1", _("One line")), ("2", _("Two lines"))])
config.usage.show_eit_nownext = ConfigYesNo(default=True)
config.usage.show_vcr_scart = ConfigYesNo(default=False)
config.usage.pic_resolution = ConfigSelection(default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)", "720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")])
config.epg = ConfigSubsection()
config.epg.eit = ConfigYesNo(default=True)
config.epg.mhw = ConfigYesNo(default=False)
config.epg.freesat = ConfigYesNo(default=False)
config.epg.viasat = ConfigYesNo(default=False)
config.epg.netmed = ConfigYesNo(default=False)
config.epg.virgin = ConfigYesNo(default=False)
def EpgSettingsChanged(configElement):
mask = 0xffffffff
if not config.epg.eit.value:
mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
if not config.epg.mhw.value:
mask &= ~eEPGCache.MHW
if not config.epg.freesat.value:
mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
if not config.epg.viasat.value:
mask &= ~eEPGCache.VIASAT
if not config.epg.netmed.value:
mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
if not config.epg.virgin.value:
mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
eEPGCache.getInstance().setEpgSources(mask)
config.epg.eit.addNotifier(EpgSettingsChanged)
config.epg.mhw.addNotifier(EpgSettingsChanged)
config.epg.freesat.addNotifier(EpgSettingsChanged)
config.epg.viasat.addNotifier(EpgSettingsChanged)
config.epg.netmed.addNotifier(EpgSettingsChanged)
config.epg.virgin.addNotifier(EpgSettingsChanged)
config.epg.histminutes = ConfigSelectionNumber(default=0, min=0, max=120, stepwidth=15, wraparound=True)
def EpgHistorySecondsChanged(configElement):
eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.value * 60)
config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)
config.epg.cacheloadsched = ConfigYesNo(default=False)
config.epg.cachesavesched = ConfigYesNo(default=False)
def EpgCacheLoadSchedChanged(configElement):
import EpgLoadSave
EpgLoadSave.EpgCacheLoadCheck()
def EpgCacheSaveSchedChanged(configElement):
import EpgLoadSave
EpgLoadSave.EpgCacheSaveCheck()
config.epg.cacheloadsched.addNotifier(EpgCacheLoadSchedChanged, immediate_feedback=False)
config.epg.cachesavesched.addNotifier(EpgCacheSaveSchedChanged, immediate_feedback=False)
config.epg.cacheloadtimer = ConfigSelectionNumber(default=24, stepwidth=1, min=1, max=24, wraparound=True)
config.epg.cachesavetimer = ConfigSelectionNumber(default=24, stepwidth=1, min=1, max=24, wraparound=True)
config.osd.dst_left = ConfigSelectionNumber(default=0, stepwidth=1, min=0, max=720, wraparound=False)
config.osd.dst_width = ConfigSelectionNumber(default=720, stepwidth=1, min=0, max=720, wraparound=False)
config.osd.dst_top = ConfigSelectionNumber(default=0, stepwidth=1, min=0, max=576, wraparound=False)
config.osd.dst_height = ConfigSelectionNumber(default=576, stepwidth=1, min=0, max=576, wraparound=False)
config.osd.alpha = ConfigSelectionNumber(default=255, stepwidth=1, min=0, max=255, wraparound=False)
config.av.osd_alpha = NoSave(ConfigNumber(default=255))
config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")), ("topandbottom", _("Top and Bottom"))], "auto")
config.osd.threeDznorm = ConfigSlider(default=50, increment=1, limits=(0, 100))
config.osd.show3dextensions = ConfigYesNo(default=False)
hddchoises = [('/etc/enigma2/', 'Internal Flash')]
for p in harddiskmanager.getMountedPartitions():
if os.path.exists(p.mountpoint):
d = os.path.normpath(p.mountpoint)
if p.mountpoint != '/':
hddchoises.append((p.mountpoint, d))
config.misc.epgcachepath = ConfigSelection(default='/etc/enigma2/', choices=hddchoises)
config.misc.epgcachefilename = ConfigText(default='epg', fixed_size=False)
config.misc.epgcache_filename = ConfigText(default=(config.misc.epgcachepath.value + config.misc.epgcachefilename.value.replace('.dat', '') + '.dat'))
def EpgCacheChanged(configElement):
config.misc.epgcache_filename.setValue(os.path.join(config.misc.epgcachepath.value, config.misc.epgcachefilename.value.replace('.dat', '') + '.dat'))
config.misc.epgcache_filename.save()
eEPGCache.getInstance().setCacheFile(config.misc.epgcache_filename.value)
epgcache = eEPGCache.getInstance()
epgcache.save()
if not config.misc.epgcache_filename.value.startswith("/etc/enigma2/"):
if os.path.exists('/etc/enigma2/' + config.misc.epgcachefilename.value.replace('.dat', '') + '.dat'):
os.remove('/etc/enigma2/' + config.misc.epgcachefilename.value.replace('.dat', '') + '.dat')
config.misc.epgcachepath.addNotifier(EpgCacheChanged, immediate_feedback=False)
config.misc.epgcachefilename.addNotifier(EpgCacheChanged, immediate_feedback=False)
config.misc.showradiopic = ConfigYesNo(default=True)
def setHDDStandby(configElement):
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(int(configElement.value))
config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)
if SystemInfo["12V_Output"]:
def set12VOutput(configElement):
Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)
config.usage.keymap = ConfigText(default=eEnv.resolve("${datadir}/enigma2/keymap.xml"))
config.network = ConfigSubsection()
if SystemInfo["WakeOnLAN"]:
def wakeOnLANChanged(configElement):
if getBoxType() in ('et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbipbox'):
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
else:
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")
config.network.wol = ConfigYesNo(default=False)
config.network.wol.addNotifier(wakeOnLANChanged)
config.network.AFP_autostart = ConfigYesNo(default=True)
config.network.NFS_autostart = ConfigYesNo(default=True)
config.network.OpenVPN_autostart = ConfigYesNo(default=True)
config.network.Samba_autostart = ConfigYesNo(default=True)
config.network.Inadyn_autostart = ConfigYesNo(default=True)
config.network.uShare_autostart = ConfigYesNo(default=True)
config.softwareupdate = ConfigSubsection()
config.softwareupdate.check = ConfigYesNo(default=True)
config.softwareupdate.checktimer = ConfigSelection(choices=[
("1", "hour"),
("2", "2 hours"),
("3", "3 hours"),
("4", "4 hours"),
("6", "6 hours"),
("8", "8 hours"),
("12", "12 hours"),
("24", "24 hours"),
("48", "2 days"),
], default="1")
config.softwareupdate.updatefound = NoSave(ConfigBoolean(default=False))
config.softwareupdate.updatebeta = ConfigYesNo(default=True)
config.softwareupdate.updateisunstable = ConfigInteger(default=0)
config.timeshift = ConfigSubsection()
choicelist = [("0", "Disabled")]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
config.timeshift.startdelay = ConfigSelection(default="10", choices=choicelist)
config.timeshift.showinfobar = ConfigYesNo(default=True)
config.timeshift.stopwhilerecording = ConfigYesNo(default=False)
config.timeshift.favoriteSaveAction = ConfigSelection(default="askuser", choices=[("askuser", _("Ask user")), ("savetimeshift", _("Save and stop")), ("savetimeshiftandrecord", _("Save and record")), ("noSave", _("Don't save"))])
config.timeshift.permanentrecording = ConfigYesNo(default=False)
config.timeshift.isRecording = NoSave(ConfigYesNo(default=False))
config.seek = ConfigSubsection()
config.seek.autoskip = ConfigYesNo(default=True)
config.seek.baractivation = ConfigSelection(default="leftright", choices=[("leftright", _("Long Left/Right")), ("ffrw", _("Long << / >>"))])
config.seek.sensibility = ConfigSelection(default="10", choices=[
("1", _("0.1%")), ("2", _("0.2%")), ("5", _("0.5%")),
("10", _("1%")), ("20", _("2%")), ("50", _("5%")),
("100", _("10%"))])
config.seek.updown_skips = ConfigYesNo(default=True)
config.seek.selfdefined_up = ConfigSelectionNumber(default=180, min=1, max=300, stepwidth=1, wraparound=True)
config.seek.selfdefined_down = ConfigSelectionNumber(default=60, min=1, max=300, stepwidth=1, wraparound=True)
config.seek.selfdefined_left = ConfigSelectionNumber(default=10, min=1, max=300, stepwidth=1, wraparound=True)
config.seek.selfdefined_right = ConfigSelectionNumber(default=10, min=1, max=300, stepwidth=1, wraparound=True)
config.seek.number_skips = ConfigYesNo(default=False)
config.seek.selfdefined_13 = ConfigSelectionNumber(default=30, min=1, max=300, stepwidth=1, wraparound=True)
config.seek.selfdefined_46 = ConfigSelectionNumber(default=180, min=5, max=1800, stepwidth=5, wraparound=True)
config.seek.selfdefined_79 = ConfigSelectionNumber(default=300, min=10, max=3600, stepwidth=10, wraparound=True)
config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default="2", choices=["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.enter_backward = ConfigSelection(default="1", choices=["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
def updateEnterForward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_forward, configElement.value)
config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback=False)
def updateEnterBackward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_backward, configElement.value)
config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback=False)
config.seek.on_pause = ConfigSelection(default="play", choices=[
("play", _("Play")),
("step", _("Single step (GOP)")),
("last", _("Last speed"))])
config.crash = ConfigSubsection()
config.crash.details = ConfigYesNo(default=True)
config.crash.enabledebug = ConfigYesNo(default=False)
config.crash.debugloglimit = ConfigSelectionNumber(default=4, min=1, max=10, stepwidth=1, wraparound=True)
config.crash.daysloglimit = ConfigSelectionNumber(default=8, min=1, max=30, stepwidth=1, wraparound=True)
config.crash.sizeloglimit = ConfigSelectionNumber(default=10, min=1, max=20, stepwidth=1, wraparound=True)
debugpath = [('/home/root/logs/', '/home/root/')]
for p in harddiskmanager.getMountedPartitions():
if os.path.exists(p.mountpoint):
d = os.path.normpath(p.mountpoint)
if p.mountpoint != '/':
debugpath.append((p.mountpoint + 'logs/', d))
config.crash.debug_path = ConfigSelection(default="/home/root/logs/", choices=debugpath)
def updatedebug_path(configElement):
if not os.path.exists(config.crash.debug_path.value):
os.mkdir(config.crash.debug_path.value, 0755)
config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback=False)
config.usage.timerlist_finished_timer_position = ConfigSelection(default="end", choices=[("beginning", _("at beginning")), ("end", _("at end"))])
def updateEraseSpeed(el):
eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
def updateEraseFlags(el):
eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
config.misc.erase_speed = ConfigSelection(default="100", choices=[
("10", "10 MB/s"),
("20", "20 MB/s"),
("50", "50 MB/s"),
("100", "100 MB/s")])
config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback=False)
config.misc.erase_flags = ConfigSelection(default="0", choices=[
("0", _("Disable")),
("1", _("Internal hdd only")),
("3", _("Everywhere"))])
config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback=False)
if SystemInfo["ZapMode"]:
def setZapmode(el):
file = open(SystemInfo["ZapMode"], "w")
file.write(el.value)
file.close()
config.misc.zapmode = ConfigSelection(default="mute", choices=[
("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
config.misc.zapmode.addNotifier(setZapmode, immediate_feedback=False)
config.usage.historymode = ConfigSelection(default="1", choices=[("0", _("Just zap")), ("1", _("Show menu"))])
config.subtitles = ConfigSubsection()
config.subtitles.ttx_subtitle_colors = ConfigSelection(default="0", choices=[
("0", _("original")),
("1", _("white")),
("2", _("yellow"))])
config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default=False)
config.subtitles.subtitle_position = ConfigSelection(default="50", choices=["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"])
config.subtitles.subtitle_alignment = ConfigSelection(default="center", choices=[("left", _("left")), ("center", _("center")), ("right", _("right"))])
config.subtitles.subtitle_rewrap = ConfigYesNo(default=False)
config.subtitles.subtitle_borderwidth = ConfigSelection(default="3", choices=["1", "2", "3", "4", "5"])
config.subtitles.subtitle_fontsize = ConfigSelection(choices=["%d" % x for x in range(16, 101) if not x % 2], default="38")
subtitle_delay_choicelist = []
for i in range(-900000, 1845000, 45000):
if i == 0:
subtitle_delay_choicelist.append(("0", _("No delay")))
else:
subtitle_delay_choicelist.append(("%d" % i, "%2.1f sec" % (i / 90000.)))
config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default="0", choices=subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default=False)
config.subtitles.dvb_subtitles_original_position = ConfigSelection(default="0", choices=[("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
config.subtitles.dvb_subtitles_centered = ConfigYesNo(default=True)
config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default="0", choices=subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default="0", choices=[
("0", _("No transparency")),
("25", "10%"),
("50", "20%"),
("75", "30%"),
("100", "40%"),
("125", "50%"),
("150", "60%"),
("175", "70%"),
("200", "80%"),
("225", "90%"),
("255", _("Full transparency"))])
config.subtitles.pango_subtitle_colors = ConfigSelection(default="1", choices=[
("1", _("white")),
("2", _("yellow"))])
config.subtitles.pango_subtitles_delay = ConfigSelection(default="0", choices=subtitle_delay_choicelist)
config.subtitles.pango_subtitles_fps = ConfigSelection(default="1", choices=[
("1", _("Original")),
("23976", _("23.976")),
("24000", _("24")),
("25000", _("25")),
("29970", _("29.97")),
("30000", _("30"))])
config.subtitles.pango_autoturnon = ConfigYesNo(default=True)
config.autolanguage = ConfigSubsection()
audio_language_choices = [
("---", _("None")),
("und", _("Undetermined")),
("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
("ara", _("Arabic")),
("eus baq", _("Basque")),
("bul", _("Bulgarian")),
("hrv", _("Croatian")),
("ces cze", _("Czech")),
("dan", _("Danish")),
("dut ndl Dutch", _("Dutch")),
("eng qaa Englisch", _("English")),
("est", _("Estonian")),
("fin", _("Finnish")),
("fra fre", _("French")),
("deu ger", _("German")),
("ell gre", _("Greek")),
("heb", _("Hebrew")),
("hun", _("Hungarian")),
("ita", _("Italian")),
("lav", _("Latvian")),
("lit", _("Lithuanian")),
("ltz", _("Luxembourgish")),
("nor", _("Norwegian")),
("pol", _("Polish")),
("por", _("Portuguese")),
("fas per", _("Persian")),
("ron rum", _("Romanian")),
("rus", _("Russian")),
("srp", _("Serbian")),
("slk slo", _("Slovak")),
("slv", _("Slovenian")),
("spa", _("Spanish")),
("swe", _("Swedish")),
("tha", _("Thai")),
("tur Audio_TUR", _("Turkish")),
("ukr Ukr", _("Ukrainian"))]
def setEpgLanguage(configElement):
eServiceEvent.setEPGLanguage(configElement.value)
config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices[2:], default="---")
config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
def setEpgLanguageAlternative(configElement):
eServiceEvent.setEPGLanguageAlternative(configElement.value)
config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices[2:], default="---")
config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)
config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_defaultac3 = ConfigYesNo(default=True)
config.autolanguage.audio_defaultddp = ConfigYesNo(default=False)
config.autolanguage.audio_usecache = ConfigYesNo(default=True)
subtitle_language_choices = audio_language_choices[:1] + audio_language_choices[2:]
config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default=False)
config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default=False)
config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default=False)
config.autolanguage.subtitle_usecache = ConfigYesNo(default=True)
config.autolanguage.equal_languages = ConfigSelection(default="15", choices=[
("0", _("None")), ("1", "1"), ("2", "2"), ("3", "1,2"),
("4", "3"), ("5", "1,3"), ("6", "2,3"), ("7", "1,2,3"),
("8", "4"), ("9", "1,4"), ("10", "2,4"), ("11", "1,2,4"),
("12", "3,4"), ("13", "1,3,4"), ("14", "2,3,4"), ("15", _("All"))])
config.logmanager = ConfigSubsection()
config.logmanager.showinextensions = ConfigYesNo(default=False)
config.logmanager.user = ConfigText(default='', fixed_size=False)
config.logmanager.useremail = ConfigText(default='', fixed_size=False)
config.logmanager.usersendcopy = ConfigYesNo(default=True)
config.logmanager.path = ConfigText(default="/")
config.logmanager.additionalinfo = NoSave(ConfigText(default=""))
config.logmanager.sentfiles = ConfigLocations(default='')
config.vixsettings = ConfigSubsection()
config.vixsettings.Subservice = ConfigYesNo(default=True)
config.vixsettings.ColouredButtons = ConfigYesNo(default=False)
config.vixsettings.InfoBarEpg_mode = ConfigSelection(default="0", choices=[
("0", _("as plugin in extended bar")),
("1", _("with long OK press")),
("2", _("with exit button")),
("3", _("with left/right buttons"))])
config.epgselection = ConfigSubsection()
config.epgselection.sort = ConfigSelection(default="0", choices=[("0", _("Time")), ("1", _("Alphanumeric"))])
config.epgselection.overjump = ConfigYesNo(default=False)
config.epgselection.infobar_type_mode = ConfigSelection(default="graphics", choices=[("graphics", _("Multi EPG")), ("single", _("Single EPG"))])
if SystemInfo.get("NumVideoDecoders", 1) > 1:
config.epgselection.infobar_preview_mode = ConfigSelection(default="1", choices=[("0", _("Disabled")), ("1", _("Full screen")), ("2", _("PiP"))])
else:
config.epgselection.infobar_preview_mode = ConfigSelection(default="1", choices=[("0", _("Disabled")), ("1", _("Full screen"))])
config.epgselection.infobar_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.infobar_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.infobar_itemsperpage = ConfigSelectionNumber(default=2, stepwidth=1, min=1, max=4, wraparound=True)
if SystemInfo.get("NumVideoDecoders", 1) > 1:
if HardwareInfo().is_nextgen():
previewdefault = "2"
else:
previewdefault = "1"
config.epgselection.infobar_preview_mode = ConfigSelection(default=previewdefault, choices=[("0", _("Disabled")), ("1", _("Full screen")), ("2", _("PiP"))])
else:
config.epgselection.infobar_preview_mode = ConfigSelection(default="1", choices=[("0", _("Disabled")), ("1", _("Full screen"))])
config.epgselection.infobar_roundto = ConfigSelection(default="15", choices=[("15", _("%d minutes") % 15), ("30", _("%d minutes") % 30), ("60", _("%d minutes") % 60)])
config.epgselection.infobar_prevtime = ConfigClock(default=time())
config.epgselection.infobar_prevtimeperiod = ConfigSelection(default="180", choices=[("60", _("%d minutes") % 60), ("90", _("%d minutes") % 90), ("120", _("%d minutes") % 120), ("150", _("%d minutes") % 150), ("180", _("%d minutes") % 180), ("210", _("%d minutes") % 210), ("240", _("%d minutes") % 240), ("270", _("%d minutes") % 270), ("300", _("%d minutes") % 300)])
config.epgselection.infobar_primetimehour = ConfigSelectionNumber(default=20, stepwidth=1, min=00, max=23, wraparound=True)
config.epgselection.infobar_primetimemins = ConfigSelectionNumber(default=00, stepwidth=1, min=00, max=59, wraparound=True)
config.epgselection.infobar_servicetitle_mode = ConfigSelection(default="picon+servicename", choices=[("servicename", _("Service Name")), ("picon", _("Picon")), ("picon+servicename", _("Picon and Service Name"))])
config.epgselection.infobar_servfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.infobar_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.infobar_timelinefs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.infobar_timeline24h = ConfigYesNo(default=True)
config.epgselection.infobar_servicewidth = ConfigSelectionNumber(default=200, stepwidth=1, min=70, max=500, wraparound=True)
config.epgselection.infobar_piconwidth = ConfigSelectionNumber(default=100, stepwidth=1, min=70, max=500, wraparound=True)
config.epgselection.infobar_infowidth = ConfigSelectionNumber(default=50, stepwidth=25, min=0, max=150, wraparound=True)
config.epgselection.enhanced_preview_mode = ConfigYesNo(default=True)
config.epgselection.enhanced_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.enhanced_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.enhanced_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.enhanced_itemsperpage = ConfigSelectionNumber(default=18, stepwidth=1, min=12, max=40, wraparound=True)
config.epgselection.multi_showbouquet = ConfigYesNo(default=False)
config.epgselection.multi_preview_mode = ConfigYesNo(default=True)
config.epgselection.multi_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.multi_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.multi_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.multi_itemsperpage = ConfigSelectionNumber(default=18, stepwidth=1, min=12, max=40, wraparound=True)
config.epgselection.graph_showbouquet = ConfigYesNo(default=False)
config.epgselection.graph_preview_mode = ConfigYesNo(default=True)
config.epgselection.graph_type_mode = ConfigSelection(default="graphics", choices=[("graphics", _("Graphics")), ("text", _("Text"))])
config.epgselection.graph_ok = ConfigSelection(default="Zap", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.graph_oklong = ConfigSelection(default="Zap + Exit", choices=[("Zap", _("Zap")), ("Zap + Exit", _("Zap + Exit"))])
config.epgselection.graph_info = ConfigSelection(default="Channel Info", choices=[("Channel Info", _("Channel Info")), ("Single EPG", _("Single EPG"))])
config.epgselection.graph_infolong = ConfigSelection(default="Single EPG", choices=[("Channel Info", _("Channel Info")), ("Single EPG", _("Single EPG"))])
config.epgselection.graph_roundto = ConfigSelection(default="15", choices=[("15", _("%d minutes") % 15), ("30", _("%d minutes") % 30), ("60", _("%d minutes") % 60)])
config.epgselection.graph_prevtime = ConfigClock(default=time())
config.epgselection.graph_prevtimeperiod = ConfigSelection(default="180", choices=[("60", _("%d minutes") % 60), ("90", _("%d minutes") % 90), ("120", _("%d minutes") % 120), ("150", _("%d minutes") % 150), ("180", _("%d minutes") % 180), ("210", _("%d minutes") % 210), ("240", _("%d minutes") % 240), ("270", _("%d minutes") % 270), ("300", _("%d minutes") % 300)])
config.epgselection.graph_primetimehour = ConfigSelectionNumber(default=20, stepwidth=1, min=00, max=23, wraparound=True)
config.epgselection.graph_primetimemins = ConfigSelectionNumber(default=00, stepwidth=1, min=00, max=59, wraparound=True)
config.epgselection.graph_servicetitle_mode = ConfigSelection(default="picon+servicename", choices=[("servicename", _("Service Name")), ("picon", _("Picon")), ("picon+servicename", _("Picon and Service Name"))])
config.epgselection.graph_channel1 = ConfigYesNo(default=False)
config.epgselection.graph_servfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.graph_eventfs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.graph_timelinefs = ConfigSelectionNumber(default=0, stepwidth=1, min=-8, max=10, wraparound=True)
config.epgselection.graph_timeline24h = ConfigYesNo(default=True)
config.epgselection.graph_itemsperpage = ConfigSelectionNumber(default=8, stepwidth=1, min=3, max=20, wraparound=True)
config.epgselection.graph_pig = ConfigYesNo(default=True)
config.epgselection.graph_heightswitch = NoSave(ConfigYesNo(default=False))
config.epgselection.graph_servicewidth = ConfigSelectionNumber(default=250, stepwidth=1, min=70, max=500, wraparound=True)
config.epgselection.graph_piconwidth = ConfigSelectionNumber(default=100, stepwidth=1, min=70, max=500, wraparound=True)
config.epgselection.graph_infowidth = ConfigSelectionNumber(default=50, stepwidth=25, min=0, max=150, wraparound=True)
if not os.path.exists('/usr/emu_scripts/'):
os.mkdir('/usr/emu_scripts/', 0755)
softcams = os.listdir('/usr/emu_scripts/')
config.oscaminfo = ConfigSubsection()
config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
config.oscaminfo.userdatafromconf = ConfigYesNo(default=False)
config.oscaminfo.autoupdate = ConfigYesNo(default=False)
config.oscaminfo.username = ConfigText(default="username", fixed_size=False, visible_width=12)
config.oscaminfo.password = ConfigPassword(default="password", fixed_size=False)
config.oscaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True)
config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536))
config.oscaminfo.intervall = ConfigSelectionNumber(default=10, min=1, max=600, stepwidth=1, wraparound=True)
SystemInfo["OScamInstalled"] = False
config.cccaminfo = ConfigSubsection()
config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
config.cccaminfo.serverNameLength = ConfigSelectionNumber(default=22, min=10, max=100, stepwidth=1, wraparound=True)
config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
config.cccaminfo.username = ConfigText(default="", fixed_size=False)
config.cccaminfo.password = ConfigText(default="", fixed_size=False)
config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(default=5, min=1, max=10, stepwidth=1, wraparound=True)
config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)
SystemInfo["CCcamInstalled"] = False
for softcam in softcams:
if softcam.lower().startswith('cccam'):
config.cccaminfo.showInExtensions = ConfigYesNo(default=True)
SystemInfo["CCcamInstalled"] = True
elif softcam.lower().startswith('oscam'):
config.oscaminfo.showInExtensions = ConfigYesNo(default=True)
SystemInfo["OScamInstalled"] = True
config.streaming = ConfigSubsection()
config.streaming.stream_ecm = ConfigYesNo(default=False)
config.streaming.descramble = ConfigYesNo(default=True)
config.streaming.stream_eit = ConfigYesNo(default=True)
config.streaming.stream_ait = ConfigYesNo(default=True)
config.streaming.authentication = ConfigYesNo(default=False)
config.pluginbrowser = ConfigSubsection()
config.pluginbrowser.po = ConfigYesNo(default=False)
config.pluginbrowser.src = ConfigYesNo(default=False)
def InitUsageConfig():
config.usage = ConfigSubsection()
config.usage.subnetwork = ConfigYesNo(default = True)
config.usage.subnetwork_cable = ConfigYesNo(default = True)
config.usage.subnetwork_terrestrial = ConfigYesNo(default = True)
config.usage.showdish = ConfigYesNo(default = True)
config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))])
config.usage.multibouquet = ConfigYesNo(default = True)
config.usage.alternative_number_mode = ConfigYesNo(default = False)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
config.usage.hide_number_markers = ConfigYesNo(default = True)
config.usage.hide_number_markers.addNotifier(refreshServiceList)
config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [("-1", _("Disable"))]
for i in range(0,1300,100):
choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i))
config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default = False)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(default = "keep", choices = [
("standard", _("Standard")),
("keep", _("Keep service")),
("reverseB", _("Reverse bouquet buttons")),
("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])
choicelist = [("by skin", _("As defined by the skin"))]
for i in range (5,41):
choicelist.append((str(i)))
config.usage.servicelist_number_of_services = ConfigSelection(default = "by skin", choices = choicelist)
config.usage.servicelist_number_of_services.addNotifier(refreshServiceList)
config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
config.usage.e1like_radio_mode = ConfigYesNo(default = True)
choicelist = [("0", _("No timeout"))]
for i in range(1, 12):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
config.usage.show_second_infobar = ConfigSelection(default = "0", choices = [("", _("None"))] + choicelist + [("EPG",_("EPG"))])
config.usage.show_simple_second_infobar = ConfigYesNo(default = False)
config.usage.infobar_frontend_source = ConfigSelection(default = "settings", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
config.usage.oldstyle_zap_controls = ConfigYesNo(default = False)
config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False)
config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
config.usage.ok_is_channelselection = ConfigYesNo(default = False)
config.usage.volume_instead_of_channelselection = ConfigYesNo(default = False)
config.usage.channelselection_preview = ConfigYesNo(default = False)
config.usage.show_spinner = ConfigYesNo(default = True)
config.usage.menu_sort_weight = ConfigDictionarySet(default = { "mainmenu" : {"submenu" : {} }})
config.usage.menu_sort_mode = ConfigSelection(default = "default", choices = [("a_z", _("alphabetical")), ("default", _("Default")), ("user", _("user defined")), ("user_hidden", _("user defined hidden"))])
config.usage.menu_show_numbers = ConfigSelection(default = "no", choices = [("no", _("no")), ("menu&plugins", _("in menu and plugins")), ("menu", _("in menu only")), ("plugins", _("in plugins only"))])
config.usage.menu_path = ConfigSelection(default = "off", choices = [
("off", _("Disabled")),
("small", _("Small")),
("large", _("Large")),])
config.usage.enable_tt_caching = ConfigYesNo(default = True)
config.usage.sort_settings = ConfigYesNo(default=False)
choicelist = []
for i in (10, 30):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h))
config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])
config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])
config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
("no", _("no")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
for i in [60, 300, 600, 900, 1800, 2700, 3600]:
m = i/60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)
config.usage.default_path = ConfigText(default = "")
config.usage.timer_path = ConfigText(default = "<default>")
config.usage.instantrec_path = ConfigText(default = "<default>")
config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_days = ConfigNumber(default=8)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")),
("ask no", _("Ask user") + " " + _("default") + " " + _("no")),
("resume", _("Resume from last position")),
("beginning", _("Start from the beginning"))])
config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))])
config.usage.next_movie_msg = ConfigYesNo(default = True)
config.usage.last_movie_played = ConfigText()
config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
("no", _("no")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ])
config.usage.setup_level = ConfigSelection(default = "simple", choices = [
("simple", _("Normal")),
("intermediate", _("Advanced")),
("expert", _("Expert")) ])
config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [
("no", _("no")),
("yes", _("yes")),
("except", _("No, except Wakeup timer")) ])
config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [
("no", _("no")),
("yes", _("yes")),
("standby", _("Yes, only from standby")),
("deepstandby", _("Yes, only from deep standby")) ])
config.usage.wakeup_day = ConfigSubDict()
config.usage.wakeup_time = ConfigSubDict()
for i in range(7):
config.usage.wakeup_day[i] = ConfigEnableDisable(default = False)
config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60))
choicelist = [("0", _("Do nothing"))]
for i in range(3600, 21601, 3600):
h = abs(i / 3600)
h = ngettext("%d hour", "%d hours", h) % h
choicelist.append((str(i), _("Standby in ") + h))
config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict()
for i in range(7):
config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
for i in range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append((str(i), _("Standby in ") + m))
config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)
choicelist = [("0", _("Disabled"))]
for i in [300, 600] + range(900, 14401, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append((str(i), _("after ") + m))
config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False)
config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled"))]
for m in (1, 5, 10, 15, 30, 60):
choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m))
config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist)
config.usage.check_timeshift = ConfigYesNo(default = True)
choicelist = [("0", _("Disabled"))]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)
config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [
("0", "DVB-S/-C/-T"),
("1", "DVB-S/-T/-C"),
("2", "DVB-C/-S/-T"),
("3", "DVB-C/-T/-S"),
("4", "DVB-T/-C/-S"),
("5", "DVB-T/-S/-C"),
("127", _("No priority")) ])
def remote_fallback_changed(configElement):
if configElement.value:
configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value)
configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "")
config.usage.remote_fallback_enabled = ConfigYesNo(default = False)
config.usage.remote_fallback = ConfigText(default = "", fixed_size = False)
config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False)
config.usage.remote_fallback_import_url = ConfigText(default = "", fixed_size = False)
config.usage.remote_fallback_import_url.addNotifier(remote_fallback_changed, immediate_feedback=False)
config.usage.remote_fallback_alternative = ConfigYesNo(default = False)
config.usage.remote_fallback_dvb_t = ConfigText(default = "", fixed_size = False)
config.usage.remote_fallback_dvb_t.addNotifier(remote_fallback_changed, immediate_feedback=False)
config.usage.remote_fallback_dvb_c = ConfigText(default = "", fixed_size = False)
config.usage.remote_fallback_dvb_c.addNotifier(remote_fallback_changed, immediate_feedback=False)
config.usage.remote_fallback_atsc = ConfigText(default = "", fixed_size = False)
config.usage.remote_fallback_atsc.addNotifier(remote_fallback_changed, immediate_feedback=False)
config.usage.remote_fallback_import = ConfigSelection(default = "", choices = [("", _("No")), ("channels", _("Channels only")), ("channels_epg", _("Channels and EPG")), ("epg", _("EPG only"))])
config.usage.remote_fallback_import_restart = ConfigYesNo(default = False)
config.usage.remote_fallback_import_standby = ConfigYesNo(default = False)
config.usage.remote_fallback_ok = ConfigYesNo(default = False)
config.usage.remote_fallback_nok = ConfigYesNo(default = False)
config.usage.remote_fallback_extension_menu = ConfigYesNo(default = False)
config.usage.remote_fallback_external_timer = ConfigYesNo(default = False)
config.usage.remote_fallback_openwebif_customize = ConfigYesNo(default = False)
config.usage.remote_fallback_openwebif_userid = ConfigText(default = "root")
config.usage.remote_fallback_openwebif_password = ConfigPassword(default = "default")
config.usage.remote_fallback_openwebif_port = ConfigInteger(default=80, limits=(0,65535))
config.usage.remote_fallback_dvbt_region = ConfigText(default = "fallback DVB-T/T2 Europe")
config.usage.show_timer_conflict_warning = ConfigYesNo(default = True)
dvbs_nims = [("-2", _("Disabled"))]
dvbt_nims = [("-2", _("Disabled"))]
dvbc_nims = [("-2", _("Disabled"))]
atsc_nims = [("-2", _("Disabled"))]
nims = [("-1", _("auto"))]
for x in nimmanager.nim_slots:
if x.isCompatible("DVB-S"):
dvbs_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("DVB-T"):
dvbt_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("DVB-C"):
dvbc_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("ATSC"):
atsc_nims.append((str(x.slot), x.getSlotName()))
nims.append((str(x.slot), x.getSlotName()))
config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
nims.insert(0,("-2", _("Disabled")))
config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims))
dvbs_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims)
config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims))
dvbt_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims)
config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims))
dvbc_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims)
config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims))
atsc_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims)
SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims))
SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims))
SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims))
SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims))
config.misc.disable_background_scan = ConfigYesNo(default = False)
config.misc.use_ci_assignment = ConfigYesNo(default = False)
config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [
('barleft', _("Progress bar left")),
('barright', _("Progress bar right")),
('percleft', _("Percentage left")),
('percright', _("Percentage right")),
('no', _("no")) ])
config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)
config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)
config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)
config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
('o', _("Off")),
('p', _("Progress")),
('s', _("Small progress")),
('i', _("Icons")),
])
config.usage.movielist_unseen = ConfigYesNo(default = False)
config.usage.swap_snr_on_osd = ConfigYesNo(default = False)
def SpinnerOnOffChanged(configElement):
setSpinnerOnOff(int(configElement.value))
config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)
def EnableTtCachingChanged(configElement):
setEnableTtCachingOnOff(int(configElement.value))
config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)
def TunerTypePriorityOrderChanged(configElement):
setTunerTypePriorityOrder(int(configElement.value))
config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)
def PreferredTunerChanged(configElement):
setPreferredTuner(int(configElement.value))
config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
config.usage.show_picon_in_display = ConfigYesNo(default = True)
config.usage.hide_zap_errors = ConfigYesNo(default = False)
config.usage.show_cryptoinfo = ConfigYesNo(default = True)
config.usage.show_eit_nownext = ConfigYesNo(default = True)
config.usage.show_vcr_scart = ConfigYesNo(default = False)
config.usage.show_update_disclaimer = ConfigYesNo(default = True)
config.usage.pic_resolution = ConfigSelection(default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")][:SystemInfo["HasFullHDSkinSupport"] and 4 or 3])
if SystemInfo["Fan"]:
choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))]
if os.path.exists("/proc/stb/fp/fan_choices"):
choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")]
config.usage.fan = ConfigSelection(choicelist)
def fanChanged(configElement):
open(SystemInfo["Fan"], "w").write(configElement.value)
config.usage.fan.addNotifier(fanChanged)
if SystemInfo["FanPWM"]:
def fanSpeedChanged(configElement):
open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:])
config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255))
config.usage.fanspeed.addNotifier(fanSpeedChanged)
if SystemInfo["PowerLED"]:
def powerLEDChanged(configElement):
open(SystemInfo["PowerLED"], "w").write(configElement.value and "on" or "off")
config.usage.powerLED = ConfigYesNo(default = True)
config.usage.powerLED.addNotifier(powerLEDChanged)
if SystemInfo["StandbyLED"]:
def standbyLEDChanged(configElement):
open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
config.usage.standbyLED = ConfigYesNo(default = True)
config.usage.standbyLED.addNotifier(standbyLEDChanged)
if SystemInfo["SuspendLED"]:
def suspendLEDChanged(configElement):
open(SystemInfo["SuspendLED"], "w").write(configElement.value and "on" or "off")
config.usage.suspendLED = ConfigYesNo(default = True)
config.usage.suspendLED.addNotifier(suspendLEDChanged)
if SystemInfo["PowerOffDisplay"]:
def powerOffDisplayChanged(configElement):
open(SystemInfo["PowerOffDisplay"], "w").write(configElement.value and "1" or "0")
config.usage.powerOffDisplay = ConfigYesNo(default = True)
config.usage.powerOffDisplay.addNotifier(powerOffDisplayChanged)
if SystemInfo["LCDshow_symbols"]:
def lcdShowSymbols(configElement):
open(SystemInfo["LCDshow_symbols"], "w").write(configElement.value and "1" or "0")
config.usage.lcd_show_symbols = ConfigYesNo(default = True)
config.usage.lcd_show_symbols.addNotifier(lcdShowSymbols)
if SystemInfo["WakeOnLAN"]:
def wakeOnLANChanged(configElement):
if "fp" in SystemInfo["WakeOnLAN"]:
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")
else:
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
config.usage.wakeOnLAN = ConfigYesNo(default = False)
config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged)
if SystemInfo["hasXcoreVFD"]:
def set12to8characterVFD(configElement):
open(SystemInfo["hasXcoreVFD"], "w").write(not configElement.value and "1" or "0")
config.usage.toggle12to8characterVFD = ConfigYesNo(default = False)
config.usage.toggle12to8characterVFD.addNotifier(set12to8characterVFD)
if SystemInfo["LcdLiveTVMode"]:
def setLcdLiveTVMode(configElement):
open(SystemInfo["LcdLiveTVMode"], "w").write(configElement.value)
config.usage.LcdLiveTVMode = ConfigSelection(default = "0", choices=[str(x) for x in range(0,9)])
config.usage.LcdLiveTVMode.addNotifier(setLcdLiveTVMode)
if SystemInfo["LcdLiveDecoder"]:
def setLcdLiveDecoder(configElement):
open(SystemInfo["LcdLiveDecoder"], "w").write(configElement.value)
config.usage.LcdLiveDecoder = ConfigSelection(default = "0", choices=[str(x) for x in range(0,4)])
config.usage.LcdLiveDecoder.addNotifier(setLcdLiveDecoder)
config.usage.boolean_graphic = ConfigSelection(default="true", choices={"false": _("no"), "true": _("yes"), "only_bool": _("yes, but not in multi selections")})
config.epg = ConfigSubsection()
config.epg.eit = ConfigYesNo(default = True)
config.epg.mhw = ConfigYesNo(default = False)
config.epg.freesat = ConfigYesNo(default = True)
config.epg.viasat = ConfigYesNo(default = True)
config.epg.netmed = ConfigYesNo(default = True)
config.epg.virgin = ConfigYesNo(default = False)
config.epg.opentv = ConfigYesNo(default = False)
config.misc.showradiopic = ConfigYesNo(default = True)
def EpgSettingsChanged(configElement):
from enigma import eEPGCache
mask = 0xffffffff
if not config.epg.eit.value:
mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
if not config.epg.mhw.value:
mask &= ~eEPGCache.MHW
if not config.epg.freesat.value:
mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
if not config.epg.viasat.value:
mask &= ~eEPGCache.VIASAT
if not config.epg.netmed.value:
mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
if not config.epg.virgin.value:
mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
if not config.epg.opentv.value:
mask &= ~eEPGCache.OPENTV
eEPGCache.getInstance().setEpgSources(mask)
config.epg.eit.addNotifier(EpgSettingsChanged)
config.epg.mhw.addNotifier(EpgSettingsChanged)
config.epg.freesat.addNotifier(EpgSettingsChanged)
config.epg.viasat.addNotifier(EpgSettingsChanged)
config.epg.netmed.addNotifier(EpgSettingsChanged)
config.epg.virgin.addNotifier(EpgSettingsChanged)
config.epg.opentv.addNotifier(EpgSettingsChanged)
config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
def EpgHistorySecondsChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)
def setHDDStandby(configElement):
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(int(configElement.value))
config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)
if SystemInfo["12V_Output"]:
def set12VOutput(configElement):
Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)
config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))
config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml"))
config.usage.alternative_imagefeed = ConfigText(default="", fixed_size=False)
config.seek = ConfigSubsection()
config.seek.selfdefined_13 = ConfigNumber(default=15)
config.seek.selfdefined_46 = ConfigNumber(default=60)
config.seek.selfdefined_79 = ConfigNumber(default=300)
config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.on_pause = ConfigSelection(default = "play", choices = [
("play", _("Play")),
("step", _("Single step (GOP)")),
("last", _("Last speed")) ])
config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])
def updateEnterForward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_forward, configElement.value)
config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)
def updateEnterBackward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_backward, configElement.value)
config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)
def updateEraseSpeed(el):
eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
def updateEraseFlags(el):
eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
config.misc.erase_speed = ConfigSelection(default="20", choices = [
("10", _("10 MB/s")),
("20", _("20 MB/s")),
("50", _("50 MB/s")),
("100", _("100 MB/s"))])
config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
config.misc.erase_flags = ConfigSelection(default="1", choices = [
("0", _("Disable")),
("1", _("Internal hdd only")),
("3", _("Everywhere"))])
config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)
if SystemInfo["ZapMode"]:
def setZapmode(el):
open(SystemInfo["ZapMode"], "w").write(el.value)
config.misc.zapmode = ConfigSelection(default = "mute", choices = [
("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)
if SystemInfo["VFD_scroll_repeats"]:
def scroll_repeats(el):
open(SystemInfo["VFD_scroll_repeats"], "w").write(el.value)
choicelist = []
for i in range(1, 11, 1):
choicelist.append((str(i)))
config.usage.vfd_scroll_repeats = ConfigSelection(default = "3", choices = choicelist)
config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats, immediate_feedback = False)
if SystemInfo["VFD_scroll_delay"]:
def scroll_delay(el):
open(SystemInfo["VFD_scroll_delay"], "w").write(el.value)
choicelist = []
for i in range(0, 1001, 50):
choicelist.append((str(i)))
config.usage.vfd_scroll_delay = ConfigSelection(default = "150", choices = choicelist)
config.usage.vfd_scroll_delay.addNotifier(scroll_delay, immediate_feedback = False)
if SystemInfo["VFD_initial_scroll_delay"]:
def initial_scroll_delay(el):
open(SystemInfo["VFD_initial_scroll_delay"], "w").write(el.value)
choicelist = []
for i in range(0, 20001, 500):
choicelist.append((str(i)))
config.usage.vfd_initial_scroll_delay = ConfigSelection(default = "1000", choices = choicelist)
config.usage.vfd_initial_scroll_delay.addNotifier(initial_scroll_delay, immediate_feedback = False)
if SystemInfo["VFD_final_scroll_delay"]:
def final_scroll_delay(el):
open(SystemInfo["VFD_final_scroll_delay"], "w").write(el.value)
choicelist = []
for i in range(0, 20001, 500):
choicelist.append((str(i)))
config.usage.vfd_final_scroll_delay = ConfigSelection(default = "1000", choices = choicelist)
config.usage.vfd_final_scroll_delay.addNotifier(final_scroll_delay, immediate_feedback = False)
if SystemInfo["HasBypassEdidChecking"]:
def setHasBypassEdidChecking(configElement):
open(SystemInfo["HasBypassEdidChecking"], "w").write(configElement.value)
config.av.bypassEdidChecking = ConfigSelection(default = "00000000", choices = [ ("00000001", _("yes")), ("00000000", _("no"))] )
config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking)
if SystemInfo["HasColorspace"]:
def setHaveColorspace(configElement):
open(SystemInfo["HasColorspace"], "w").write(configElement.value)
if SystemInfo["HasColorspaceSimple"]:
config.av.hdmicolorspace = ConfigSelection(default = "Edid(Auto)", choices={"Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")})
else:
config.av.hdmicolorspace = ConfigSelection(default = "auto", choices={"auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444")})
config.av.hdmicolorspace.addNotifier(setHaveColorspace)
if SystemInfo["HasColordepth"]:
def setHaveColordepth(configElement):
open(SystemInfo["HasColordepth"], "w").write(configElement.value)
config.av.hdmicolordepth = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")})
config.av.hdmicolordepth.addNotifier(setHaveColordepth)
if SystemInfo["HasHDMIpreemphasis"]:
def setHDMIpreemphasis(configElement):
open(SystemInfo["HasHDMIpreemphasis"], "w").write(configElement.value)
config.av.hdmipreemphasis = ConfigSelection(default = "off", choices = [ ("on", _("yes")), ("off", _("no"))] )
config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis)
if SystemInfo["HasColorimetry"]:
def setColorimetry(configElement):
open(SystemInfo["HasColorimetry"], "w").write(configElement.value)
config.av.hdmicolorimetry = ConfigSelection(default = "auto", choices = [("auto", _("Auto")), ("bt2020ncl", _("BT 2020 NCL")), ("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))])
config.av.hdmicolorimetry.addNotifier(setColorimetry)
if SystemInfo["HasHdrType"]:
def setHdmiHdrType(configElement):
open(SystemInfo["HasHdrType"], "w").write(configElement.value)
config.av.hdmihdrtype = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "none": _("SDR"), "hdr10": _("HDR10"), "hlg": _("HLG"), "dolby": _("Dolby")})
config.av.hdmihdrtype.addNotifier(setHdmiHdrType)
if SystemInfo["HDRSupport"]:
def setHlgSupport(configElement):
open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value)
config.av.hlg_support = ConfigSelection(default = "auto(EDID)",
choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ])
config.av.hlg_support.addNotifier(setHlgSupport)
def setHdr10Support(configElement):
open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value)
config.av.hdr10_support = ConfigSelection(default = "auto(EDID)",
choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ])
config.av.hdr10_support.addNotifier(setHdr10Support)
def setDisable12Bit(configElement):
open("/proc/stb/video/disable_12bit", "w").write(configElement.value)
config.av.allow_12bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]);
config.av.allow_12bit.addNotifier(setDisable12Bit)
def setDisable10Bit(configElement):
open("/proc/stb/video/disable_10bit", "w").write(configElement.value)
config.av.allow_10bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]);
config.av.allow_10bit.addNotifier(setDisable10Bit)
config.subtitles = ConfigSubsection()
config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("original")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
config.subtitles.colourise_dialogs = ConfigYesNo(default = False)
config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40")
config.subtitles.showbackground = ConfigYesNo(default = False)
subtitle_delay_choicelist = []
for i in range(-900000, 1845000, 45000):
if i == 0:
subtitle_delay_choicelist.append(("0", _("No delay")))
else:
subtitle_delay_choicelist.append((str(i), _("%2.1f sec") % (i / 90000.)))
config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False)
config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
("0", _("No transparency")),
("25", "10%"),
("50", "20%"),
("75", "30%"),
("100", "40%"),
("125", "50%"),
("150", "60%"),
("175", "70%"),
("200", "80%"),
("225", "90%"),
("255", _("Full transparency"))])
config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("alternative")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True)
config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
("1", _("Original")),
("23976", _("23.976")),
("24000", _("24")),
("25000", _("25")),
("29970", _("29.97")),
("30000", _("30"))])
config.subtitles.pango_autoturnon = ConfigYesNo(default = True)
config.autolanguage = ConfigSubsection()
audio_language_choices=[
("", _("None")),
("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
("ara", _("Arabic")),
("eus baq", _("Basque")),
("bul", _("Bulgarian")),
("hrv", _("Croatian")),
("chn sgp", _("Chinese - Simplified")),
("twn hkn",_("Chinese - Traditional")),
("ces cze", _("Czech")),
("dan", _("Danish")),
("dut ndl nld", _("Dutch")),
("eng qaa", _("English")),
("est", _("Estonian")),
("fin", _("Finnish")),
("fra fre", _("French")),
("deu ger", _("German")),
("ell gre grc", _("Greek")),
("heb", _("Hebrew")),
("hun", _("Hungarian")),
("ind", _("Indonesian")),
("ita", _("Italian")),
("lav", _("Latvian")),
("lit", _("Lithuanian")),
("ltz", _("Luxembourgish")),
("nor", _("Norwegian")),
("fas per fa pes", _("Persian")),
("pol", _("Polish")),
("por dub Dub DUB ud1", _("Portuguese")),
("ron rum", _("Romanian")),
("rus", _("Russian")),
("srp", _("Serbian")),
("slk slo", _("Slovak")),
("slv", _("Slovenian")),
("spa", _("Spanish")),
("swe", _("Swedish")),
("tha", _("Thai")),
("tur Audio_TUR", _("Turkish")),
("ukr Ukr", _("Ukrainian"))]
epg_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
def setEpgLanguage(configElement):
eServiceEvent.setEPGLanguage(configElement.value)
def setEpgLanguageAlternative(configElement):
eServiceEvent.setEPGLanguageAlternative(configElement.value)
def epglanguage(configElement):
config.autolanguage.audio_epglanguage.setChoices([x for x in epg_language_choices if x[0] and x[0] != config.autolanguage.audio_epglanguage_alternative.value or not x[0] and not config.autolanguage.audio_epglanguage_alternative.value])
config.autolanguage.audio_epglanguage_alternative.setChoices([x for x in epg_language_choices if x[0] and x[0] != config.autolanguage.audio_epglanguage.value or not x[0]])
config.autolanguage.audio_epglanguage = ConfigSelection(epg_language_choices, default="")
config.autolanguage.audio_epglanguage_alternative = ConfigSelection(epg_language_choices, default="")
config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
config.autolanguage.audio_epglanguage.addNotifier(epglanguage, initial_call=False)
config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)
config.autolanguage.audio_epglanguage_alternative.addNotifier(epglanguage)
def getselectedlanguages(range):
return [eval("config.autolanguage.audio_autoselect%x.value" % x) for x in range]
def autolanguage(configElement):
config.autolanguage.audio_autoselect1.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((2,3,4)) or not x[0] and not config.autolanguage.audio_autoselect2.value])
config.autolanguage.audio_autoselect2.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,3,4)) or not x[0] and not config.autolanguage.audio_autoselect3.value])
config.autolanguage.audio_autoselect3.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,2,4)) or not x[0] and not config.autolanguage.audio_autoselect4.value])
config.autolanguage.audio_autoselect4.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,2,3)) or not x[0]])
config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="")
config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="")
config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="")
config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="")
config.autolanguage.audio_autoselect1.addNotifier(autolanguage, initial_call=False)
config.autolanguage.audio_autoselect2.addNotifier(autolanguage, initial_call=False)
config.autolanguage.audio_autoselect3.addNotifier(autolanguage, initial_call=False)
config.autolanguage.audio_autoselect4.addNotifier(autolanguage)
config.autolanguage.audio_defaultac3 = ConfigYesNo(default = True)
config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
config.autolanguage.audio_usecache = ConfigYesNo(default = True)
subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
def getselectedsublanguages(range):
return [eval("config.autolanguage.subtitle_autoselect%x.value" % x) for x in range]
def autolanguagesub(configElement):
config.autolanguage.subtitle_autoselect1.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((2,3,4)) or not x[0] and not config.autolanguage.subtitle_autoselect2.value])
config.autolanguage.subtitle_autoselect2.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,3,4)) or not x[0] and not config.autolanguage.subtitle_autoselect3.value])
config.autolanguage.subtitle_autoselect3.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,2,4)) or not x[0] and not config.autolanguage.subtitle_autoselect4.value])
config.autolanguage.subtitle_autoselect4.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,2,3)) or not x[0]])
choicelist = [('0', _("None"))]
for y in range(1, 15 if config.autolanguage.subtitle_autoselect4.value else (7 if config.autolanguage.subtitle_autoselect3.value else(4 if config.autolanguage.subtitle_autoselect2.value else (2 if config.autolanguage.subtitle_autoselect1.value else 0)))):
choicelist.append((str(y), ", ".join([eval("config.autolanguage.subtitle_autoselect%x.getText()" % x) for x in (y & 1, y & 2, y & 4 and 3, y & 8 and 4) if x])))
if config.autolanguage.subtitle_autoselect3.value:
choicelist.append((str(y+1), "All"))
config.autolanguage.equal_languages.setChoices(choicelist, default="0")
config.autolanguage.equal_languages = ConfigSelection(default="0", choices=[str(x) for x in range(0, 16)])
config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="")
config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="")
config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="")
config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="")
config.autolanguage.subtitle_autoselect1.addNotifier(autolanguagesub, initial_call=False)
config.autolanguage.subtitle_autoselect2.addNotifier(autolanguagesub, initial_call=False)
config.autolanguage.subtitle_autoselect3.addNotifier(autolanguagesub, initial_call=False)
config.autolanguage.subtitle_autoselect4.addNotifier(autolanguagesub)
config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)
config.streaming = ConfigSubsection()
config.streaming.stream_ecm = ConfigYesNo(default = False)
config.streaming.descramble = ConfigYesNo(default = True)
config.streaming.descramble_client = ConfigYesNo(default = False)
config.streaming.stream_eit = ConfigYesNo(default = True)
config.streaming.stream_ait = ConfigYesNo(default = True)
config.streaming.authentication = ConfigYesNo(default = False)
config.mediaplayer = ConfigSubsection()
config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False)
config.mediaplayer.alternateUserAgent = ConfigText(default="")
config.misc.softcam_setup = ConfigSubsection()
config.misc.softcam_setup.extension_menu = ConfigYesNo(default = True)
def InitUsageConfig():
config.usage = ConfigSubsection()
#config.usage.mainmenu_mode = ConfigSelection(default = "horz", choices = [("horz", _("Horizontal")), ("vert", _("Vertical"))])
config.usage.mainmenu_mode = ConfigSelection(default = "horzanim", choices = [("horzanim", _("Horizontal-animated")), ("horzicon", _("Horizontal-icons")), ("vert", _("Vertical-menu"))])
config.usage.showdish = ConfigYesNo(default = True)
config.usage.multibouquet = ConfigYesNo(default = True)
config.usage.alternative_number_mode = ConfigYesNo(default = False)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
config.usage.hide_number_markers = ConfigYesNo(default = True)
config.usage.hide_number_markers.addNotifier(refreshServiceList)
config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [("-1", _("Devide")), ("0", _("Disable"))]
for i in range(100,1850,50):
choicelist.append(("%d" % i, ngettext("%d pixel wide", "%d pixels wide", i) % i))
config.usage.servicelist_column = ConfigSelection(default="0", choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default = False)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")),
("keep", _("Keep service")),
("reverseB", _("Reverse bouquet buttons")),
("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])
config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
config.usage.e1like_radio_mode = ConfigYesNo(default = True)
choicelist = [("0", _("No timeout"))]
for i in range(1, 12):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
config.usage.show_second_infobar = ConfigSelection(default = None, choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))])
config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
config.usage.oldstyle_zap_controls = ConfigYesNo(default = False)
config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False)
config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
config.usage.ok_is_channelselection = ConfigYesNo(default = False)
config.usage.show_spinner = ConfigYesNo(default = True)
config.usage.enable_tt_caching = ConfigYesNo(default = True)
choicelist = []
for i in (10, 30):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h))
config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])
config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])
config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
for i in [60, 300, 600, 900, 1800, 2700, 3600]:
m = i/60
choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)
config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD))
config.usage.timer_path = ConfigText(default = "<default>")
config.usage.instantrec_path = ConfigText(default = "<default>")
config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])
config.cccaminfo = ConfigSubsection()
config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True)
config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
config.cccaminfo.username = ConfigText(default="", fixed_size=False)
config.cccaminfo.password = ConfigText(default="", fixed_size=False)
config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True)
config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)
config.oscaminfo = ConfigSubsection()
config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
config.oscaminfo.userdatafromconf = ConfigYesNo(default = False)
config.oscaminfo.autoupdate = ConfigYesNo(default = False)
config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12)
config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False)
config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True)
config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) )
config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True)
SystemInfo["OScamInstalled"] = False
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_days = ConfigNumber(default=8)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
("ask", _("Ask user")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning")) ])
config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat")), ("playallvideos", _("Play All Videos (without infos)"))])
config.usage.next_movie_msg = ConfigYesNo(default = True)
config.usage.last_movie_played = ConfigText()
config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
config.usage.setup_level = ConfigSelection(default = "expert", choices = [
("simple", _("Simple")),
("intermediate", _("Intermediate")),
("expert", _("Expert")) ])
config.usage.startup_to_standby = ConfigYesNo(default = False)
config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby")) ] )
config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby")) ] )
choicelist = [("0", _("Do nothing"))]
for i in range(3600, 21601, 3600):
h = abs(i / 3600)
h = ngettext("%d hour", "%d hours", h) % h
choicelist.append(("%d" % i, _("Standby in ") + h))
config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
for i in range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append(("%d" % i, _("Standby in ") + m))
config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)
choicelist = [("0", _("Disabled"))]
for i in [60, 300, 600] + range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append(("%d" % i, _("after ") + m))
config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = True)
config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled"))]
for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600):
if i < 60:
m = ngettext("%d second", "%d seconds", i) % i
else:
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append(("%d" % i, m))
config.usage.screen_saver = ConfigSelection(default = "60", choices = choicelist)
config.usage.check_timeshift = ConfigYesNo(default = True)
choicelist = [("0", _("Disabled"))]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m))
config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)
config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [
("0", "DVB-S/-C/-T"),
("1", "DVB-S/-T/-C"),
("2", "DVB-C/-S/-T"),
("3", "DVB-C/-T/-S"),
("4", "DVB-T/-C/-S"),
("5", "DVB-T/-S/-C") ])
nims = [("-1", _("auto"))]
for x in nimmanager.nim_slots:
nims.append((str(x.slot), x.getSlotName()))
config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
nims.insert(0,("-2", _("Disabled")))
config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
config.misc.disable_background_scan = ConfigYesNo(default = False)
config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [
('barleft', _("Progress bar left")),
('barright', _("Progress bar right")),
('percleft', _("Percentage left")),
('percright', _("Percentage right")),
('no', _("No")) ])
config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)
config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)
config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)
config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
('o', _("Off")),
('p', _("Progress")),
('s', _("Small progress")),
('i', _("Icons")),
])
config.usage.movielist_unseen = ConfigYesNo(default = False)
config.usage.swap_snr_on_osd = ConfigYesNo(default = False)
config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False)
config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False)
def SpinnerOnOffChanged(configElement):
setSpinnerOnOff(int(configElement.value))
config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)
def EnableTtCachingChanged(configElement):
setEnableTtCachingOnOff(int(configElement.value))
config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)
def TunerTypePriorityOrderChanged(configElement):
setTunerTypePriorityOrder(int(configElement.value))
config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)
def PreferredTunerChanged(configElement):
setPreferredTuner(int(configElement.value))
config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
config.usage.hide_zap_errors = ConfigYesNo(default = False)
config.usage.hide_ci_messages = ConfigYesNo(default = True)
config.usage.show_cryptoinfo = ConfigYesNo(default = True)
config.usage.show_eit_nownext = ConfigYesNo(default = True)
config.usage.show_vcr_scart = ConfigYesNo(default = False)
if SystemInfo["StandbyLED"]:
def standbyLEDChanged(configElement):
open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
config.usage.standbyLED = ConfigYesNo(default = True)
config.usage.standbyLED.addNotifier(standbyLEDChanged)
if SystemInfo["WakeOnLAN"]:
def wakeOnLANChanged(configElement):
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
config.usage.wakeOnLAN = ConfigYesNo(default = False)
config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged)
config.epg = ConfigSubsection()
config.epg.eit = ConfigYesNo(default = True)
config.epg.mhw = ConfigYesNo(default = False)
config.epg.freesat = ConfigYesNo(default = True)
config.epg.viasat = ConfigYesNo(default = True)
config.epg.netmed = ConfigYesNo(default = True)
config.epg.virgin = ConfigYesNo(default = False)
config.misc.showradiopic = ConfigYesNo(default = True)
def EpgSettingsChanged(configElement):
from enigma import eEPGCache
mask = 0xffffffff
if not config.epg.eit.value:
mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
if not config.epg.mhw.value:
mask &= ~eEPGCache.MHW
if not config.epg.freesat.value:
mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
if not config.epg.viasat.value:
mask &= ~eEPGCache.VIASAT
if not config.epg.netmed.value:
mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
if not config.epg.virgin.value:
mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
eEPGCache.getInstance().setEpgSources(mask)
config.epg.eit.addNotifier(EpgSettingsChanged)
config.epg.mhw.addNotifier(EpgSettingsChanged)
config.epg.freesat.addNotifier(EpgSettingsChanged)
config.epg.viasat.addNotifier(EpgSettingsChanged)
config.epg.netmed.addNotifier(EpgSettingsChanged)
config.epg.virgin.addNotifier(EpgSettingsChanged)
config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
def EpgHistorySecondsChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)
def setHDDStandby(configElement):
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(int(configElement.value))
config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)
if SystemInfo["12V_Output"]:
def set12VOutput(configElement):
Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)
config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))
config.seek = ConfigSubsection()
config.seek.selfdefined_13 = ConfigNumber(default=15)
config.seek.selfdefined_46 = ConfigNumber(default=60)
config.seek.selfdefined_79 = ConfigNumber(default=300)
config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.on_pause = ConfigSelection(default = "play", choices = [
("play", _("Play")),
("step", _("Single step (GOP)")),
("last", _("Last speed")) ])
config.crash = ConfigSubsection()
config.crash.details = ConfigYesNo(default = False)
config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])
def updateEnterForward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_forward, configElement.value)
config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)
def updateEnterBackward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_backward, configElement.value)
config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)
def updateEraseSpeed(el):
eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
def updateEraseFlags(el):
eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
config.misc.erase_speed = ConfigSelection(default="20", choices = [
("10", "10 MB/s"),
("20", "20 MB/s"),
("50", "50 MB/s"),
("100", "100 MB/s")])
config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
config.misc.erase_flags = ConfigSelection(default="1", choices = [
("0", _("Disable")),
("1", _("Internal hdd only")),
("3", _("Everywhere"))])
config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)
if SystemInfo["ZapMode"]:
def setZapmode(el):
open(SystemInfo["ZapMode"], "w").write(el.value)
config.misc.zapmode = ConfigSelection(default = "mute", choices = [
("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)
config.subtitles = ConfigSubsection()
config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("original")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["16", "18", "20", "22", "24", "26", "28", "30", "32", "34", "36", "38", "40", "42", "44", "46", "48", "50", "52", "54"], default = "34")
subtitle_delay_choicelist = []
for i in range(-900000, 1845000, 45000):
if i == 0:
subtitle_delay_choicelist.append(("0", _("No delay")))
else:
subtitle_delay_choicelist.append(("%d" % i, "%2.1f sec" % (i / 90000.)))
config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = True)
config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
("0", _("No transparency")),
("25", "10%"),
("50", "20%"),
("75", "30%"),
("100", "40%"),
("125", "50%"),
("150", "60%"),
("175", "70%"),
("200", "80%"),
("225", "90%"),
("255", _("Full transparency"))])
config.subtitles.pango_subtitle_colors = ConfigSelection(default = "0", choices = [
("0", _("alternative")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
("1", _("Original")),
("23976", _("23.976")),
("24000", _("24")),
("25000", _("25")),
("29970", _("29.97")),
("30000", _("30"))])
config.subtitles.pango_autoturnon = ConfigYesNo(default = True)
config.autolanguage = ConfigSubsection()
audio_language_choices=[
("---", _("None")),
("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
("ara", _("Arabic")),
("eus baq", _("Basque")),
("bul", _("Bulgarian")),
("hrv", _("Croatian")),
("ces cze", _("Czech")),
("dan", _("Danish")),
("dut ndl", _("Dutch")),
("eng qaa", _("English")),
("est", _("Estonian")),
("fin", _("Finnish")),
("fra fre", _("French")),
("deu ger", _("German")),
("ell gre", _("Greek")),
("heb", _("Hebrew")),
("hun", _("Hungarian")),
("ita", _("Italian")),
("lav", _("Latvian")),
("lit", _("Lithuanian")),
("ltz", _("Luxembourgish")),
("nor", _("Norwegian")),
("pol", _("Polish")),
("por", _("Portuguese")),
("fas per", _("Persian")),
("ron rum", _("Romanian")),
("rus", _("Russian")),
("srp", _("Serbian")),
("slk slo", _("Slovak")),
("slv", _("Slovenian")),
("spa", _("Spanish")),
("swe", _("Swedish")),
("tha", _("Thai")),
("tur Audio_TUR", _("Turkish"))]
def setEpgLanguage(configElement):
eServiceEvent.setEPGLanguage(configElement.value)
config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
def setEpgLanguageAlternative(configElement):
eServiceEvent.setEPGLanguageAlternative(configElement.value)
config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)
config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False)
config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
config.autolanguage.audio_usecache = ConfigYesNo(default = True)
subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)
config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [
("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"),
("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"),
("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"),
("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))])
config.streaming = ConfigSubsection()
config.streaming.stream_ecm = ConfigYesNo(default = False)
config.streaming.descramble = ConfigYesNo(default = True)
config.streaming.stream_eit = ConfigYesNo(default = True)
config.streaming.stream_ait = ConfigYesNo(default = True)
config.streaming.authentication = ConfigYesNo(default = False)
SystemInfo["GraphMultiEpg"] = os.path.exists("/usr/lib/enigma2/python/Plugins/Extensions/GraphMultiEPG")
if SystemInfo["GraphMultiEpg"]:
config.misc.graph_mepg = ConfigSubsection()
config.misc.graph_mepg.extension_menu = ConfigYesNo(default = True)
def InitUsageConfig():
config.usage = ConfigSubsection()
config.usage.showdish = ConfigYesNo(default=True)
config.misc.showrotorposition = ConfigSelection(default='no', choices=[('no', _('no')),
('yes', _('yes')),
('withtext', _('with text')),
('tunername', _('with tuner name'))])
config.usage.multibouquet = ConfigYesNo(default=True)
config.usage.alternative_number_mode = ConfigYesNo(default=False)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
config.usage.hide_number_markers = ConfigYesNo(default=True)
config.usage.hide_number_markers.addNotifier(refreshServiceList)
config.usage.servicetype_icon_mode = ConfigSelection(default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename'))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename'))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(default='0', choices=[('0', _('None')),
('1', _('Left from servicename')),
('2', _('Right from servicename')),
('3', _('Red colored'))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [('-1', _('Disable'))]
for i in range(0, 1300, 100):
choicelist.append((str(i), ngettext('%d pixel wide', '%d pixels wide', i) % i))
config.usage.servicelist_column = ConfigSelection(default='-1', choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default=False)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(default='standard', choices=[('standard', _('Standard')),
('keep', _('Keep service')),
('reverseB', _('Reverse bouquet buttons')),
('keep reverseB', _('Keep service') + ' + ' + _('Reverse bouquet buttons'))])
choicelist = [('by skin', _('As defined by the skin'))]
for i in range(5, 41):
choicelist.append(str(i))
config.usage.servicelist_number_of_services = ConfigSelection(default='by skin', choices=choicelist)
config.usage.servicelist_number_of_services.addNotifier(refreshServiceList)
config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default=False)
config.usage.e1like_radio_mode = ConfigYesNo(default=True)
choicelist = [('0', _('No timeout'))]
for i in range(1, 12):
choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))
config.usage.infobar_timeout = ConfigSelection(default='5', choices=choicelist)
config.usage.show_infobar_on_zap = ConfigYesNo(default=True)
config.usage.show_infobar_on_skip = ConfigYesNo(default=True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default=False)
config.usage.show_second_infobar = ConfigSelection(default=None, choices=[(None, _('None'))] + choicelist + [('EPG', _('EPG'))])
config.usage.show_simple_second_infobar = ConfigYesNo(default=True)
config.usage.infobar_frontend_source = ConfigSelection(default='tuner', choices=[('settings', _('Settings')), ('tuner', _('Tuner'))])
config.usage.oldstyle_zap_controls = ConfigYesNo(default=False)
config.usage.oldstyle_channel_select_controls = ConfigYesNo(default=False)
config.usage.zap_with_ch_buttons = ConfigYesNo(default=False)
config.usage.ok_is_channelselection = ConfigYesNo(default=False)
config.usage.volume_instead_of_channelselection = ConfigYesNo(default=False)
config.usage.channelselection_preview = ConfigYesNo(default=False)
config.usage.show_spinner = ConfigYesNo(default=True)
config.usage.menu_sort_weight = ConfigDictionarySet(default={'mainmenu': {'submenu': {}}})
config.usage.menu_sort_mode = ConfigSelection(default='default', choices=[('a_z', _('alphabetical')), ('default', _('Default')), ('user', _('user defined'))])
config.usage.menu_path = ConfigSelection(default='off', choices=[('off', _('Disabled')), ('small', _('Small')), ('large', _('Large'))])
config.usage.enable_tt_caching = ConfigYesNo(default=True)
choicelist = []
for i in (10, 30):
choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append((str(i), ngettext('%d hour', '%d hours', h) % h))
config.usage.hdd_standby = ConfigSelection(default='300', choices=[('0', _('No standby'))] + choicelist)
config.usage.output_12V = ConfigSelection(default='do not change', choices=[('do not change', _('Do not change')), ('off', _('Off')), ('on', _('On'))])
config.usage.pip_zero_button = ConfigSelection(default='standard', choices=[('standard', _('Standard')),
('swap', _('Swap PiP and main picture')),
('swapstop', _('Move PiP to main picture')),
('stop', _('Stop PiP'))])
config.usage.pip_hideOnExit = ConfigSelection(default='without popup', choices=[('no', _('No')), ('popup', _('With popup')), ('without popup', _('Without popup'))])
choicelist = [('-1', _('Disabled')), ('0', _('No timeout'))]
for i in [60,
300,
600,
900,
1800,
2700,
3600]:
m = i / 60
choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default='0', choices=choicelist)
config.usage.default_path = ConfigText(default=resolveFilename(SCOPE_HDD))
config.usage.timer_path = ConfigText(default='<default>')
config.usage.instantrec_path = ConfigText(default='<default>')
config.usage.timeshift_path = ConfigText(default='/media/hdd/')
config.usage.allowed_timeshift_paths = ConfigLocations(default=['/media/hdd/'])
config.oscaminfo = ConfigSubsection()
config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
config.oscaminfo.userdatafromconf = ConfigYesNo(default=False)
config.oscaminfo.autoupdate = ConfigYesNo(default=False)
config.oscaminfo.username = ConfigText(default='username', fixed_size=False, visible_width=12)
config.oscaminfo.password = ConfigPassword(default='password', fixed_size=False)
config.oscaminfo.ip = ConfigIP(default=[127,
0,
0,
1], auto_jump=True)
config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536))
config.oscaminfo.intervall = ConfigSelectionNumber(min=1, max=600, stepwidth=1, default=10, wraparound=True)
SystemInfo['OScamInstalled'] = False
config.cccaminfo = ConfigSubsection()
config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
config.cccaminfo.serverNameLength = ConfigSelectionNumber(min=10, max=100, stepwidth=1, default=22, wraparound=True)
config.cccaminfo.name = ConfigText(default='Profile', fixed_size=False)
config.cccaminfo.ip = ConfigText(default='192.168.2.12', fixed_size=False)
config.cccaminfo.username = ConfigText(default='', fixed_size=False)
config.cccaminfo.password = ConfigText(default='', fixed_size=False)
config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
config.cccaminfo.profile = ConfigText(default='', fixed_size=False)
config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min=1, max=10, stepwidth=1, default=5, wraparound=True)
config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
config.cccaminfo.blacklist = ConfigText(default='/media/cf/CCcamInfo.blacklisted', fixed_size=False)
config.cccaminfo.profiles = ConfigText(default='/media/cf/CCcamInfo.profiles', fixed_size=False)
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_days = ConfigNumber(default=8)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(default='resume', choices=[('ask yes', _('Ask user') + ' ' + _('default') + ' ' + _('yes')),
('ask no', _('Ask user') + ' ' + _('default') + ' ' + _('no')),
('resume', _('Resume from last position')),
('beginning', _('Start from the beginning'))])
config.usage.on_movie_stop = ConfigSelection(default='movielist', choices=[('ask', _('Ask user')), ('movielist', _('Return to movie list')), ('quit', _('Return to previous service'))])
config.usage.on_movie_eof = ConfigSelection(default='movielist', choices=[('ask', _('Ask user')),
('movielist', _('Return to movie list')),
('quit', _('Return to previous service')),
('pause', _('Pause movie at end')),
('playlist', _('Play next (return to movie list)')),
('playlistquit', _('Play next (return to previous service)')),
('loop', _('Continues play (loop)')),
('repeatcurrent', _('Repeat'))])
config.usage.next_movie_msg = ConfigYesNo(default=True)
config.usage.last_movie_played = ConfigText()
config.usage.leave_movieplayer_onExit = ConfigSelection(default='popup', choices=[('no', _('No')),
('popup', _('With popup')),
('without popup', _('Without popup')),
('movielist', _('Return to movie list'))])
config.usage.setup_level = ConfigSelection(default='expert', choices=[('simple', _('Simple')), ('intermediate', _('Intermediate')), ('expert', _('Expert'))])
config.usage.startup_to_standby = ConfigSelection(default='no', choices=[('no', _('No')), ('yes', _('Yes')), ('except', _('No, except Wakeup timer'))])
config.usage.wakeup_menu = ConfigNothing()
config.usage.wakeup_enabled = ConfigYesNo(default=False)
config.usage.wakeup_day = ConfigSubDict()
config.usage.wakeup_time = ConfigSubDict()
for i in range(7):
config.usage.wakeup_day[i] = ConfigEnableDisable(default=False)
config.usage.wakeup_time[i] = ConfigClock(default=21600)
choicelist = [('0', _('Do nothing'))]
for i in range(3600, 21601, 3600):
h = abs(i / 3600)
h = ngettext('%d hour', '%d hours', h) % h
choicelist.append((str(i), _('Standby in ') + h))
config.usage.inactivity_timer = ConfigSelection(default='0', choices=choicelist)
config.usage.inactivity_timer_blocktime = ConfigYesNo(default=True)
config.usage.inactivity_timer_blocktime_begin = ConfigClock(default=time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end = ConfigClock(default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default=False)
config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default=time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
choicelist = [('0', _('Disabled')), ('event_standby', _('Standby after current event'))]
for i in range(900, 7201, 900):
m = abs(i / 60)
m = ngettext('%d minute', '%d minutes', m) % m
choicelist.append((str(i), _('Standby in ') + m))
config.usage.sleep_timer = ConfigSelection(default='0', choices=choicelist)
choicelist = [('0', _('Disabled'))]
for i in [60, 300, 600] + range(900, 7201, 900):
m = abs(i / 60)
m = ngettext('%d minute', '%d minutes', m) % m
choicelist.append((str(i), _('after ') + m))
config.usage.standby_to_shutdown_timer = ConfigSelection(default='0', choices=choicelist)
config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default=True)
config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [('0', _('Disabled'))]
for m in (1, 5, 10, 15, 30, 60):
choicelist.append((str(m * 60), ngettext('%d minute', '%d minutes', m) % m))
config.usage.screen_saver = ConfigSelection(default='300', choices=choicelist)
config.usage.check_timeshift = ConfigYesNo(default=True)
choicelist = [('0', _('Disabled'))]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append((str(i), ngettext('%d second', '%d seconds', i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append((str(i), ngettext('%d minute', '%d minutes', m) % m))
config.usage.timeshift_start_delay = ConfigSelection(default='0', choices=choicelist)
config.usage.alternatives_priority = ConfigSelection(default='0', choices=[('0', 'DVB-S/-C/-T'),
('1', 'DVB-S/-T/-C'),
('2', 'DVB-C/-S/-T'),
('3', 'DVB-C/-T/-S'),
('4', 'DVB-T/-C/-S'),
('5', 'DVB-T/-S/-C'),
('127', _('No priority'))])
config.usage.remote_fallback_enabled = ConfigYesNo(default=False)
config.usage.remote_fallback = ConfigText(default='', fixed_size=False)
config.usage.show_timer_conflict_warning = ConfigYesNo(default=True)
dvbs_nims = [('-2', _('Disabled'))]
dvbt_nims = [('-2', _('Disabled'))]
dvbc_nims = [('-2', _('Disabled'))]
atsc_nims = [("-2", _("Disabled"))]
nims = [('-1', _('auto'))]
for x in nimmanager.nim_slots:
if x.isCompatible('DVB-S'):
dvbs_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible('DVB-T'):
dvbt_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible('DVB-C'):
dvbc_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("ATSC"):
atsc_nims.append((str(x.slot), x.getSlotName()))
nims.append((str(x.slot), x.getSlotName()))
config.usage.frontend_priority = ConfigSelection(default='-1', choices=list(nims))
nims.insert(0, ('-2', _('Disabled')))
config.usage.recording_frontend_priority = ConfigSelection(default='-2', choices=nims)
config.usage.frontend_priority_dvbs = ConfigSelection(default='-2', choices=list(dvbs_nims))
dvbs_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_dvbs = ConfigSelection(default='-2', choices=dvbs_nims)
config.usage.frontend_priority_dvbt = ConfigSelection(default='-2', choices=list(dvbt_nims))
dvbt_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_dvbt = ConfigSelection(default='-2', choices=dvbt_nims)
config.usage.frontend_priority_dvbc = ConfigSelection(default='-2', choices=list(dvbc_nims))
dvbc_nims.insert(1, ('-1', _('auto')))
config.usage.recording_frontend_priority_dvbc = ConfigSelection(default='-2', choices=dvbc_nims)
config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims))
atsc_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims)