Ejemplo n.º 1
0
def post_photo(request):
    response = device_response()
    device = check_device(request)
    if device is None:
        response.write("UNKNOWN DEVICE")
        return response
    try:
        pin = request.REQUEST.get("PIN", "")

        pin = pin.split(".")[0].split("-")
        dt = pin[0]
        if len(pin) == 2:  #Success Picture
            pin = pin[1]
        else:
            pin = ""
        d = request.raw_post_data
        if "CMD=uploadphoto" in d: d = d.split("CMD=uploadphoto")[1][1:]
        if "CMD=realupload" in d: d = d.split("CMD=realupload")[1][1:]
        save_model_file(
            Transaction, "%s/%s/%s" % (device.sn, dt[:4], dt[4:8]) + "/" +
            pin + "_" + dt[8:] + ".jpg", d, "picture")
        if request.REQUEST.has_key('PhotoStamp'):
            DevLog(SN=device,
                   Cnt=1,
                   OP=u"PICTURE",
                   Object=pin,
                   OpTime=datetime.datetime.now()).save()
            device.photo_stamp = request.REQUEST['PhotoStamp']
            device.save()

        check_and_save_cache(device)
    except:
        errorLog(request)
    response.write("OK\n")
    return response
Ejemplo n.º 2
0
def cdata(request):
    '''
    设备向服务器的http:://xxx/cdata请求
    '''
    network_monitor(request)
    try:
        from mysite import authorize_fun
        language=request.REQUEST.get('language',None)   #---获得语言参数
        authorize_fun.check_push_device(language)   #---连接设备数量控制
        device = check_device(request, True)    #---检测、验证当前发出请求的设备
        if device is None: 
            return unknown_device_response()
        else:
            if device.deviceType==POSDEVICE:#消费机
                from mysite.pos.posdevview import pos_cdata
                ret = pos_cdata(request)
                return device_response_write(ret)
            elif device.deviceType in ['ACP', 'ACD']:#控制器or一体机:
                from mysite.iaccess.push_comm_center import acc_cdata
                ret = acc_cdata(request)
                return device_response_write(ret)
            
            if request.REQUEST.has_key('action'):
                return ok_response(device)
            elif request.method == 'GET':
                return cdata_get(request,device)
            elif request.method == 'POST':
                try:
                    return cdata_post(request, device)
#                    resp =cdata_post(request, device)
#                    return device_response_write(resp)
                except Exception, e:
                    return erro_response(e)
            else:
Ejemplo n.º 3
0
def post_photo(request):
    response = device_response()
    device = check_device(request)
    if device is None: 
        response.write("UNKNOWN DEVICE")
        return response
    try:
        pin = request.REQUEST.get("PIN","")
        
        pin = pin.split(".")[0].split("-")
        dt = pin[0]
        if len(pin) == 2: #Success Picture
            pin = pin[1]
        else:
            pin = ""
        d = request.raw_post_data
        if "CMD=uploadphoto" in d: d = d.split("CMD=uploadphoto")[1][1:]
        if "CMD=realupload" in d: d = d.split("CMD=realupload")[1][1:]
        save_model_file(Transaction,
            "%s/%s/%s" % (device.sn, dt[:4], dt[4:8])+"/"+ pin+"_"+ dt[8:] + ".jpg", 
            d, "picture")
        if request.REQUEST.has_key('PhotoStamp'):
            DevLog(SN=device, Cnt=1, OP=u"PICTURE", Object=pin, OpTime=datetime.datetime.now()).save()
            device.photo_stamp = request.REQUEST['PhotoStamp']
            device.save()
            
        check_and_save_cache(device)
    except:
        errorLog(request)
    response.write("OK\n")
    return response
Ejemplo n.º 4
0
def device_http_request(request):
    initialization()
    device = check_device(request, True)  #---检测、验证当前发出请求的设备
    if device is None:
        response.write("UNKNOWN DEVICE")
        return response
    else:
        pass
Ejemplo n.º 5
0
def device_http_request(request):
    initialization()
    device = check_device(request, True)    #---检测、验证当前发出请求的设备
    if device is None: 
        response.write("UNKNOWN DEVICE")
        return response
    else:
        pass
Ejemplo n.º 6
0
def devpost(request):
    '''
    http://xxx/devicecmd
    设备返回设备命令执行结果的请求
    '''
    from commen_utils import parse_posts
    network_monitor(request)
    
    device = check_device(request)    #---检测、验证当前发出请求的设备
    if device is None: 
        return unknown_device_response()
    else:        
        if request.method == 'GET':
            pass
        elif request.method == 'POST':
            try:
                rd = request.raw_post_data
                if settings.ENCRYPT:    #---解密
                    try:
                        import lzo
                        rawData = lzo.bufferDecrypt(rd, device.sn)
                    except:
                        rawData = rd
                else:
                    rawData = rd
                    
                try:
                    data0 = rawData.decode("gb18030")   #---解码
                except:
                    data0 = rawData
                rets = {}
                pdata = parse_posts(data0)  #---解析,结果为字典的数组
                for apost in pdata: #[CMD,ID,Return]
                    id = int(apost["ID"])   # 命令ID
                    ret = apost["Return"]   #命令执行返回值
                    if apost["CMD"] == "INFO":#更新设备信息
                        parse_dev_info(device, apost['Content'])
                        device.save()
                        rets[id] = ret
                    elif (apost["CMD"] == "GetFile" or apost["CMD"] == "Shell") and ret > 0:
                        check_upload_file(request, apost)
                        rets[id] = ret
                    elif apost["CMD"] == "VERIFY SUM" and ret > 0:  #考勤校对
                        check_att_sum(apost,device)
                        rets[id] = ret
                    elif apost["CMD"] == "PutFile":
                        check_upgradefile(id,apost,device,ret)
                        post_check_update(device,[ret]) #立即单独更新此处理的开始指针
                        #rets[id] = ret
                    else:#默认情况下CMD为DATA
                        rets[id] = ret
                if len(rets) > 0:
                    update_cmds(device, rets)
                return device_response_write("OK")
            except:
                device_response_write("")
        else:
            return unknown_data_response(device)
Ejemplo n.º 7
0
def devpost(request):
    '''
    设备返回命令执行结果的请求
    '''
    response = device_response()
    resp = ""
    device = check_device(request)
    if device is None:
        response.write("UNKNOWN DEVICE")
        return response
    try:
        rd = request.raw_post_data

        if settings.ENCRYPT:  #---解密
            try:
                import lzo
                rawData = lzo.bufferDecrypt(rd, device.sn)
            except:
                rawData = rd
        else:
            rawData = rd

        try:
            data0 = rawData.decode("gb18030")  #---解码
        except:
            data0 = rawData

        rets = {}
        pdata = parse_posts(data0)  #---解析,结果为字典的数组

        for apost in pdata:
            id = int(apost["ID"])  #---【字段】命令ID
            ret = apost["Return"]  #---【字段】命令执行结果
            if apost["CMD"] == "INFO":  #--- 【字段】命令类别
                parse_dev_info(device, apost['Content'])
                rets[id] = ret
            elif apost['CMD'] == 'PutFile' and ret > 100 * 1024:  #可能是固件升级命令
                cmdobj = update_cmd(device, id, ret)
                if cmdobj: check_upgrade_fw(device, cmdobj, request)
            elif (apost["CMD"] == "GetFile"
                  or apost["CMD"] == "Shell") and ret > 0:
                check_upload_file(request, apost)
                rets[id] = ret
            else:
                rets[id] = ret
        if len(rets) > 0:
            update_cmds(device, rets)
        resp += "OK"
        #check_and_save_cache(device)
        device.save()
    except:
        errorLog(request)
    response["Content-Length"] = len(resp)
    response.write(resp)
    return response
Ejemplo n.º 8
0
def devpost(request):
    '''
    设备返回命令执行结果的请求
    '''
    response = device_response()
    resp = ""
    device = check_device(request)
    if device is None: 
        response.write("UNKNOWN DEVICE")
        return response
    try:
        rd = request.raw_post_data
        
        if settings.ENCRYPT:    #---解密
            try:
                import lzo
                rawData = lzo.bufferDecrypt(rd, device.sn)
            except:
                rawData = rd
        else:
            rawData = rd
            
        try:
            data0 = rawData.decode("gb18030")   #---解码
        except:
            data0 = rawData
            
        rets = {}
        pdata = parse_posts(data0)  #---解析,结果为字典的数组
        
        for apost in pdata:
            id = int(apost["ID"])   #---【字段】命令ID
            ret = apost["Return"]   #---【字段】命令执行结果
            if apost["CMD"] == "INFO":#--- 【字段】命令类别
                parse_dev_info(device, apost['Content'])
                rets[id] = ret
            elif apost['CMD'] == 'PutFile' and ret > 100 * 1024:  #可能是固件升级命令
                cmdobj = update_cmd(device, id, ret)
                if cmdobj: check_upgrade_fw(device, cmdobj, request)
            elif (apost["CMD"] == "GetFile" or apost["CMD"] == "Shell") and ret > 0:
                check_upload_file(request, apost)
                rets[id] = ret
            else:
                rets[id] = ret
        if len(rets) > 0:
            update_cmds(device, rets)
        resp += "OK"
        #check_and_save_cache(device)
        device.save()
    except:
        errorLog(request)
    response["Content-Length"] = len(resp)
    response.write(resp)
    return response
Ejemplo n.º 9
0
def cdata(request):
    '''
    设备向服务器的http:://xxx/cdata请求
    '''
    from device_http.network import network_monitor
    network_monitor(request)

    encrypt = 1
    response = device_response()
    try:
        resp = ""
        from mysite import authorize_fun
        language = request.REQUEST.get('language', None)  #---获得语言参数
        authorize_fun.check_push_device(language)  #---连接设备数量控制
        device = check_device(request, True)  #---检测、验证当前发出请求的设备
        if device is None:
            response.write("UNKNOWN DEVICE")
            return response
        else:
            if request.REQUEST.has_key('action'):
                resp += "OK\n"
            elif request.method == 'GET':  #---设备GET请求
                if request.REQUEST.has_key('PIN'):  #---带人员PIN参数
                    resp += cdata_get_pin(request, device)
                else:  #--- 设备push的版本及其他一些信息的返回
                    alg_ver = "1.0"  #--- push 默认版本
                    if request.REQUEST.has_key(
                            'pushver'):  #---没有"PIN"但有"pushver" push版本参数
                        alg_ver = request.REQUEST.get(
                            'pushver'
                        )  #2010-8-25  device字段alg_ver用来区分新老固件  >=2.0为新固件,默认为旧固件
                    device.alg_ver = alg_ver
                    device.save()
                    resp += cdata_get_options(device)
                    encrypt = 0
            elif request.method == 'POST':  #---设备POST请求
                try:
                    resp += cdata_post(request, device)
                except Exception, e:
                    resp = u"ERROR: %s" % e
                    errorLog(request)
            else:
Ejemplo n.º 10
0
def cdata(request):
    '''
    设备向服务器的http:://xxx/cdata请求
    '''
    from device_http.network import network_monitor
    network_monitor(request)
    
    encrypt = 1
    response = device_response()
    try:
        resp = ""
        from mysite import authorize_fun
        language=request.REQUEST.get('language',None)   #---获得语言参数
        authorize_fun.check_push_device(language)   #---连接设备数量控制
        device = check_device(request, True)    #---检测、验证当前发出请求的设备
        if device is None: 
            response.write("UNKNOWN DEVICE")
            return response
        else:        
            if request.REQUEST.has_key('action'):
                resp += "OK\n"
            elif request.method == 'GET':   #---设备GET请求
                if request.REQUEST.has_key('PIN'):  #---带人员PIN参数
                    resp+=cdata_get_pin(request, device)
                else:   #--- 设备push的版本及其他一些信息的返回
                    alg_ver="1.0" #--- push 默认版本
                    if request.REQUEST.has_key('pushver'):  #---没有"PIN"但有"pushver" push版本参数
                        alg_ver=request.REQUEST.get('pushver')    #2010-8-25  device字段alg_ver用来区分新老固件  >=2.0为新固件,默认为旧固件
                    device.alg_ver=alg_ver
                    device.save()
                    resp+=cdata_get_options(device)
                    encrypt = 0
            elif request.method == 'POST':  #---设备POST请求
                try:
                    resp+=cdata_post(request, device)
                except Exception, e:
                    resp = u"ERROR: %s" % e
                    errorLog(request)
            else:
Ejemplo n.º 11
0
def getreq(request):
    '''
    http://xxx/getrequest
    设备读取服务器上存储的命令
    '''
    network_monitor(request)
    try:
        resp = "" #---要直接发送的内容
        device = check_device(request, True)    #---检测、验证当前发出请求的设备
        if device is None: 
            return unknown_device_response()
        else:        
            if request.method == 'GET':
                return getreq_get(request,device)
            elif request.method == 'POST':
                pass
            else:
                return unknown_data_response(device)    
        # 自动升级固件功能
        # ......
    except  Exception, e:
        import traceback;traceback.print_exc()
        resp = u"%s" % e
        return device_response_write(resp)
Ejemplo n.º 12
0
def getreq(request):
    '''
    http://xxx/getrequest
    设备读取服务器上存储的命令------------------------------------------------------------------
    '''
    from device_http.network import network_monitor
    network_monitor(request)
    response = device_response()
    try:
        resp = ""  #---要直接发送的内容
        device = check_device(request)  #---从请求得到设备对象  不自动注册
        if device is None:
            response.write("UNKNOWN DEVICE")
            return response
        #读取服务器上存储的命令的请求都带有设备INFO信息  更新设备信息
        info = request.GET.get("INFO", "")  #版本号,用户数,指纹数,记录数,设备自身IP地址
        if info:
            sql = []
            info = info.split(",")
            device.fw_version = info[0]  #---主版本号
            device.user_count = int(info[1])  #---注册用户数
            device.fp_count = int(info[2])  #---注册指纹数
            device.fp_count = int(info[2])
            device.transaction_count = int(info[3])  #---考勤记录数
            if len(info) > 4:
                device.ipaddress = info[4]  #---考勤机IP地址
                if device.alias == "auto_add":
                    device.alias = info[4]  #由于网关问题,使名称对应的IP地址与机器IP不同时的更正。
            if len(info) > 5:
                device.Fpversion = info[5]  #指纹算法版本
            device.save()

        # 自动升级固件功能
        if not hasattr(device, "is_updating_fw"):  #该设备现在没有正升级固件
            fw = fwVerStd(device.fw_version)
            if fw:  #该设备具有固件版本号
                up_version = device.get_std_fw_version()  #用于升级的设备固件标准版本号
                if up_version > fw:  #该设备固件版本号较低
                    n = int(q_server.get_from_file("UPGRADE_FW_COUNT") or "0")
                    if n < settings.MAX_UPDATE_COUNT:  #没有超出许可同时升级固件的范围
                        #升级固件
                        errMsg = dev_update_firmware(device)
                        if not errMsg:
                            device.is_updating_fw = device.last_activity
                        if errMsg:  #升级命令错
                            appendFile((u"%s UPGRADE FW %s:%s" %
                                        (device.sn, fw, errMsg)))
                        else:
                            q_server.incr("UPGRADE_FW_COUNT")
        upsql = []
        c = 0

        const_sql = "update devcmds set CmdTransTime='%(tr)s',CmdReturn=%(cm)s where id=%(id)s"
        if db_select == 4:  #postgresql 数据库
            const_sql = '''update devcmds set "CmdTransTime"='%(tr)s',"CmdReturn"=%(cm)s where id=%(id)s'''
        elif db_select == 3:  #oracle 数据库
            const_sql = "update devcmds set CmdTransTime=to_date('%(tr)s','yyyy-mm-dd hh24:mi:ss'),CmdReturn=%(cm)s where id=%(id)s"

        maxRet = device.max_comm_count  #---每次传送给设备的命令数
        maxRetSize = device.max_comm_size * 1024  #---最大数据包长度(KB)
        get_sql = "select top " + str(
            maxRet) + " id,CmdContent,CmdReturn from devcmds "
        get_sql += " where SN_id=" + str(
            device.pk
        ) + " and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id "

        if db_select == 1:
            get_sql = "select id,CmdContent,CmdReturn from devcmds "
            get_sql += " where SN_id=" + str(
                device.pk
            ) + " and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id limit " + str(
                maxRet)
        elif db_select == 4:
            get_sql = '''select id,"CmdContent","CmdReturn" from devcmds '''
            get_sql += ''' where "SN_id"=''' + str(
                device.pk
            ) + ''' and ("CmdTransTime" is null or ("CmdReturn" <=-99996 and "CmdReturn">-99999) ) order by id limit ''' + str(
                maxRet)

        elif db_select == 3:
            get_sql = "select id,CmdContent,CmdReturn from devcmds "
            get_sql += " where SN_id=" + str(
                device.pk
            ) + " and (CmdTransTime is null or CmdReturn <=-99996 and CmdReturn>-99999)) and ROWNUM <= " + str(
                maxRet) + " ORDER BY ROWNUM ASC  "

        dev_cur = conn.cursor()
        dev_cur.execute(get_sql)
        devcmds = dev_cur.fetchall()
        connection._commit()
        for d in devcmds:  #---循环要发送给设备的命令
            cr = d[2]  #---命令返回值
            if cr:
                cr += -1
            else:
                cr = -99996
            if cr < -99999:
                continue
            if db_select == 3:
                CmdContent = d[1].read()
            else:
                CmdContent = d[1]
            if CmdContent.find("DATA UPDATE user") == 0 or CmdContent.find(
                    "SMS ") == 0:  #传送用户命令,需要解码成GB2312
                cc = CmdContent
                try:
                    cc = cc.encode("gb18030")
                except:
                    try:
                        cc = cc.decode("utf-8").encode("gb18030")
                    except:
                        errorLog(request)
            else:
                cc = str(CmdContent)
            nowcmd = str(cc)
            cc = std_cmd_convert(cc, device)  #----ZK-ECO 标准命令到 PUSH-SDK 命令的转换
            if cc: resp += "C:%d:%s\n" % (d[0], cc)  #---格式: C:设备序列号:内容 \n

            c = c + 1
            if db_select == 1:
                excsql("update devcmds set CmdTransTime= now() ,CmdReturn=" +
                       str(cr) + " where id=" + str(d[0]))
            elif db_select == 3:
                excsql(
                    const_sql % {
                        "tr":
                        datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),
                        "cm": cr,
                        "id": d[0]
                    })
            else:
                upsql.append(
                    const_sql % {
                        "tr":
                        datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),
                        "cm": cr,
                        "id": d[0]
                    })
            if (c >= maxRet) or (len(resp) >= maxRetSize):
                break
                #达到了最大命令数或最大命令长度限制
            if CmdContent in ["CHECK", "CLEAR DATA", "REBOOT", "RESTART"]:
                break
                #重新启动命令只能是最后一条指令  #增加查找到CHECK指令后,直接发送
        if upsql:
            excsql(";".join(upsql))
        if db_select == 1:
            excsql("update iclock set last_activity=now() where id=" +
                   str(device.pk))
        elif db_select == 3:
            excsql("update iclock set last_activity=to_date('" +
                   datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S") +
                   "','yyyy-mm-dd hh24:mi:ss') where id=" + str(device.pk))
        else:
            excsql("update iclock set last_activity='" +
                   datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S") +
                   "' where id=" + str(device.pk))
        if c == 0:  #没有发送任何命令时,简单向设备返回 "OK" 即可
            resp += "OK"
    except Exception, e:
        resp = u"%s" % e
        errorLog(request)
Ejemplo n.º 13
0
def getreq(request):
    '''
    http://xxx/getrequest
    设备读取服务器上存储的命令------------------------------------------------------------------
    '''
    from device_http.network import network_monitor
    network_monitor(request)
    response = device_response()
    try:
        resp = "" #---要直接发送的内容
        device = check_device(request)  #---从请求得到设备对象  不自动注册
        if device is None: 
            response.write("UNKNOWN DEVICE")
            return response
        #读取服务器上存储的命令的请求都带有设备INFO信息  更新设备信息
        info = request.GET.get("INFO", "") #版本号,用户数,指纹数,记录数,设备自身IP地址
        if info:
            sql=[]
            info = info.split(",")
            device.fw_version=info[0]   #---主版本号
            device.user_count=int(info[1])  #---注册用户数
            device.fp_count=int(info[2])    #---注册指纹数
            device.fp_count=int(info[2])
            device.transaction_count=int(info[3])   #---考勤记录数
            if len(info)>4:
                device.ipaddress=info[4]    #---考勤机IP地址
                if device.alias=="auto_add":
                    device.alias=info[4]#由于网关问题,使名称对应的IP地址与机器IP不同时的更正。
            if len(info)>5:             
                device.Fpversion=info[5]   #指纹算法版本
            device.save()
            
        # 自动升级固件功能
        if not hasattr(device, "is_updating_fw"): #该设备现在没有正升级固件
            fw = fwVerStd(device.fw_version) 
            if fw: #该设备具有固件版本号
                up_version=device.get_std_fw_version() #用于升级的设备固件标准版本号
                if up_version>fw:   #该设备固件版本号较低
                    n=int(q_server.get_from_file("UPGRADE_FW_COUNT") or "0")
                    if n < settings.MAX_UPDATE_COUNT: #没有超出许可同时升级固件的范围
                        #升级固件
                        errMsg = dev_update_firmware(device)
                        if not errMsg: 
                            device.is_updating_fw=device.last_activity
                        if errMsg: #升级命令错
                            appendFile((u"%s UPGRADE FW %s:%s" % (device.sn, fw, errMsg)))
                        else:
                            q_server.incr("UPGRADE_FW_COUNT")
        upsql=[]
        c=0
        
        const_sql="update devcmds set CmdTransTime='%(tr)s',CmdReturn=%(cm)s where id=%(id)s"
        if db_select==4:#postgresql 数据库
            const_sql ='''update devcmds set "CmdTransTime"='%(tr)s',"CmdReturn"=%(cm)s where id=%(id)s'''
        elif db_select==3:#oracle 数据库
            const_sql="update devcmds set CmdTransTime=to_date('%(tr)s','yyyy-mm-dd hh24:mi:ss'),CmdReturn=%(cm)s where id=%(id)s"
      
        maxRet = device.max_comm_count  #---每次传送给设备的命令数
        maxRetSize = device.max_comm_size * 1024    #---最大数据包长度(KB)
        get_sql="select top "+ str(maxRet) +" id,CmdContent,CmdReturn from devcmds "
        get_sql+=" where SN_id="+str(device.pk)+" and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id "   

        if db_select==1:
            get_sql="select id,CmdContent,CmdReturn from devcmds "
            get_sql+=" where SN_id="+str(device.pk)+" and (CmdTransTime is null or (CmdReturn <=-99996 and CmdReturn>-99999)) order by id limit "+str(maxRet) 
        elif db_select==4:
            get_sql ='''select id,"CmdContent","CmdReturn" from devcmds '''
            get_sql+=''' where "SN_id"='''+str(device.pk)+''' and ("CmdTransTime" is null or ("CmdReturn" <=-99996 and "CmdReturn">-99999) ) order by id limit '''+str(maxRet) 
           
        elif db_select==3:
            get_sql="select id,CmdContent,CmdReturn from devcmds "
            get_sql+=" where SN_id="+str(device.pk)+" and (CmdTransTime is null or CmdReturn <=-99996 and CmdReturn>-99999)) and ROWNUM <= "+str(maxRet)+" ORDER BY ROWNUM ASC  " 
             
        dev_cur=conn.cursor()
        dev_cur.execute(get_sql)
        devcmds=dev_cur.fetchall()
        connection._commit()
        for d in devcmds:   #---循环要发送给设备的命令
            cr=d[2] #---命令返回值
            if cr:
                cr+=-1
            else:
                cr=-99996
            if cr<-99999:
                continue
            if db_select==3:
                CmdContent=d[1].read()
            else:
                CmdContent=d[1]
            if CmdContent.find("DATA UPDATE user")==0 or CmdContent.find("SMS ")==0: #传送用户命令,需要解码成GB2312
                cc=CmdContent
                try:
                    cc=cc.encode("gb18030")
                except:
                    try:
                        cc=cc.decode("utf-8").encode("gb18030")
                    except:
                        errorLog(request)
            else:                    
                cc=str(CmdContent)
            nowcmd=str(cc)
            cc=std_cmd_convert(cc, device)  #----ZK-ECO 标准命令到 PUSH-SDK 命令的转换
            if cc: resp+="C:%d:%s\n"%(d[0],cc)  #---格式: C:设备序列号:内容 \n

            c=c+1
            if db_select==1:
                excsql("update devcmds set CmdTransTime= now() ,CmdReturn="+str(cr)+" where id="+str(d[0]))
            elif db_select==3:
                excsql(const_sql%{"tr":datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),"cm":cr,"id":d[0]})
            else: 
                upsql.append(const_sql%{"tr":datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S"),"cm":cr,"id":d[0]})
            if (c>=maxRet) or (len(resp)>=maxRetSize): break;     #达到了最大命令数或最大命令长度限制
            if CmdContent in ["CHECK","CLEAR DATA","REBOOT", "RESTART"]: break; #重新启动命令只能是最后一条指令  #增加查找到CHECK指令后,直接发送
        if upsql:    
            excsql(";".join(upsql))
        if db_select==1:
            excsql("update iclock set last_activity=now() where id="+str(device.pk))
        elif db_select==3:
            excsql("update iclock set last_activity=to_date('"+datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")+"','yyyy-mm-dd hh24:mi:ss') where id="+str(device.pk))
        else:
            excsql("update iclock set last_activity='"+datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")+"' where id="+str(device.pk))
        if c == 0:#没有发送任何命令时,简单向设备返回 "OK" 即可
            resp += "OK"
    except  Exception, e:
        resp = u"%s" % e
        errorLog(request)