def _handleSmartPurge(self):
if (self._smartPurge[0] or self._smartPurge[1]) and self._IDEXPrint:
self._startGcodeInfo.append("; - Smart Purge")
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
applyFix = False
if not layer.startswith(";LAYER:0") and layer.startswith(
";LAYER:"):
temp_index = 0
while temp_index < len(lines):
if lines[temp_index].startswith(
"T0") or lines[temp_index].startswith("T1"):
# toolchange found
applyFix = True
toolChangeIndex = temp_index
if lines[temp_index].startswith("T0"):
countingForTool = 0
elif lines[temp_index].startswith("T1"):
countingForTool = 1
elif applyFix and self._smartPurge[
countingForTool] and GCodeUtils.charsInLine(
["G1", "F", "X", "Y", "E"],
lines[temp_index]):
# first extrusion with the new tool found
extrudeAgainIndex = temp_index
temp_index = toolChangeIndex
foundM109 = False
foundFirstTravel = False
while temp_index <= extrudeAgainIndex:
if not foundFirstTravel and GCodeUtils.charsInLine(
["G", "F", "X", "Y"], lines[temp_index]):
foundFirstTravel = True
smartPurgeLineIndex = temp_index - 1
if lines[temp_index].startswith("M109 S"):
foundM109 = True
elif foundM109 and lines[
temp_index].startswith("M104 S"):
# remove M104 extra line
del lines[temp_index]
break
temp_index += 1
lines[smartPurgeLineIndex] = lines[smartPurgeLineIndex] + \
"\nG1 F" + self._switchExtruderPrimeSpeed[countingForTool] + \
" E" + str(self._switchExtruderRetractionAmount[countingForTool]) + \
"\nM800 F" + self._purgeSpeed[countingForTool] + \
" S" + str(self._smartPurgeSParameter[countingForTool]) + \
" E" + str(self._smartPurgeEParameter[countingForTool]) + \
" P" + str(self._smartPurgePParameter[countingForTool]) + " ;smartpurge" + \
"\nG4 P2000\nG92 E0\nG1 F" + self._retractionRetractSpeed[countingForTool] + \
" E-" + str(self._switchExtruderRetractionAmount[countingForTool]) + "\nG92 E0"
break
temp_index += 1
layer = "\n".join(lines)
self._gcode_list[index] = layer
Logger.log("d", "smart_purge applied")
def _handleFixFirstRetract(self):
if self._fixFirstRetract:
self._startGcodeInfo.append("; - Fix First Extrusion")
lookingForTool = None
countingForTool = None
eValueT1 = None
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
if not layer.startswith(";LAYER:"):
# Get retract value before starting the first layer
for line in lines:
if line.startswith("T1"):
countingForTool = 1
if countingForTool and GCodeUtils.charsInLine(
["G", "F", "E-"], line):
eValueT1 = GCodeUtils.getValue(line, "E")
break
else:
# Fix the thing
if eValueT1:
if 'T1\nG92 E0' in layer and layer.startswith(
";LAYER:0"):
# IDEX Starts with T0, then T1. Only T1 needs to be fixed
# IDEX Starts with T1, then T0. Only T1 needs to be fixed
# MEX Starts with T1 and only T1 needs to be fixed
layer = layer.replace(
'T1\nG92 E0',
'T1\nG92 E' + str(eValueT1) + ' ;T1fix', 1)
break
elif lookingForTool == 'T1' and 'T1\nG92 E0' in layer:
# Starts with T0, first T1 found and fixed
layer = layer.replace(
'T1\nG92 E0',
'T1\nG92 E' + str(eValueT1) + ' ;T1fix', 1)
break
elif not lookingForTool:
# Starts with T0, T1 will need to be fixed
lookingForTool = 'T1'
else:
# There is no eValue to fix and it's already printing
break
self._gcode_list[index] = layer
Logger.log("d", "fix_retract applied")
def run(self):
Job.yieldThread()
# Do not change actions order as some may alter others
if self._activeExtruders or self._fixTemperatureOscilation or self._fixFirstRetract:
scanning = False
printing = False
for layer in self._gcode_list:
lines = layer.split("\n")
for line in lines:
if scanning:
if line.startswith("T0") or (line.startswith("T1")
and printing):
self._both_extruders = True
break
elif line.startswith("T1") and not printing:
self._idle_extruder = "T0"
elif GCodeUtils.charsInLine("GXYE", line):
printing = True
else:
if line.startswith(";LAYER_COUNT:"):
scanning = True
if self._both_extruders:
break
Logger.log("d", "gcode scanned")
self._handleActiveExtruders()
self._handleFixToolChangeZHop()
self._handleFixFirstRetract()
self._handleFixTemperatureOscilation()
self._handleSmartPurge()
self._handleRetractReduction()
self._handleAvoidGrindingFilament()
written_info = False
# Write Sigma Vitamins info
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
for temp_index in range(len(lines)):
if layer.startswith(";Generated with Cura_SteamEngine "
) and lines[temp_index].startswith(
";Sigma ProGen"):
lines[temp_index] = lines[temp_index] + "\n" + "\n".join(
self._startGcodeInfo)
written_info = True
layer = "\n".join(lines)
self._gcode_list[index] = layer
if written_info:
break
self._gcode_list[0] += ";BCN3D_FIXES\n"
scene = Application.getInstance().getController().getScene()
setattr(scene, "gcode_list", self._gcode_list)
self.setResult(self._gcode_list)
def _handleRetractReduction(self):
if self._retractReduction:
self._startGcodeInfo.append("; - Reduce Retraction")
removeRetracts = False
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
if layer.startswith(
";LAYER:") and not layer.startswith(";LAYER:0"):
while temp_index < len(lines):
line = lines[temp_index]
if line.startswith(
";TYPE:WALL-OUTER") or line.startswith(
";TYPE:SKIN") or line.startswith("T"):
removeRetracts = False
elif line.startswith(";TYPE:"):
removeRetracts = True
if removeRetracts:
if " E" in line and "G92" not in line:
eValue = GCodeUtils.getValue(line, "E")
lineCount = temp_index - 1
try:
if not lines[temp_index +
1].startswith("G92"):
while lineCount >= 0:
line = lines[lineCount]
if " E" in line and "G92" not in line:
if eValue < GCodeUtils.getValue(
line, "E"):
if removeRetracts:
del lines[temp_index]
temp_index -= 1
break
lineCount -= 1
except:
break
temp_index += 1
layer = "\n".join(lines)
self._gcode_list[index] = layer
Logger.log("d", "retract_reduction applied")
def _handleCoolDownToZeroAtEnd(self):
if self._IDEXPrint:
self._startGcodeInfo.append("; - Cool Down To Zero At End")
cooledDownToZero = False
self._gcode_list.reverse()
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
lines.reverse()
temp_index = 0
while temp_index < len(lines):
try:
line = lines[temp_index]
if GCodeUtils.charsInLine([
"M104 T0 S" +
str(self._materialStandByTemperature[0])
], line) or GCodeUtils.charsInLine([
"M104 T1 S" +
str(self._materialStandByTemperature[1])
], line):
if "T1" in line:
lines[
temp_index] = "M104 T1 S0 ;Standby Temperature set to Zero\n"
else:
lines[
temp_index] = "M104 T0 S0 ;Standby Temperature set to Zero\n"
cooledDownToZero = True
break
temp_index += 1
except:
break
if cooledDownToZero:
lines.reverse()
layer = "\n".join(lines)
self._gcode_list[index] = layer
break
self._gcode_list.reverse()
Logger.log("d", "cool_down_to_zero_at_end applied")
def _handleAvoidGrindingFilament(self):
if self._avoidGrindingFilament[0] or self._avoidGrindingFilament[1]:
self._startGcodeInfo.append("; - Prevent Filament Grinding")
retractionsPerExtruder = [[], []]
countingForTool = 0
purgedOffset = [0, 0]
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
if layer.startswith(";LAYER:"):
while temp_index < len(lines):
line = lines[temp_index]
if line.startswith("T0"):
countingForTool = 0
if not layer.startswith(
";LAYER:0"
) and self._smartPurge[countingForTool]:
purgedOffset[
countingForTool] += self._smartPurgePParameter[
countingForTool]
elif line.startswith("T1"):
countingForTool = 1
if not layer.startswith(
";LAYER:0"
) and self._smartPurge[countingForTool]:
purgedOffset[
countingForTool] += self._smartPurgePParameter[
countingForTool]
elif " E" in line and "G92" not in line:
eValue = GCodeUtils.getValue(line, "E")
lineCount = temp_index - 1
try:
if not lines[temp_index + 1].startswith("G92"):
while lineCount >= 0:
line = lines[lineCount]
if " E" in line and "G92" not in line:
if eValue < GCodeUtils.getValue(
line, "E"
) and self._avoidGrindingFilament[
countingForTool]:
purgeLength = self._retractionExtrusionWindow[
countingForTool]
retractionsPerExtruder[
countingForTool].append(
eValue)
if len(retractionsPerExtruder[
countingForTool]
) > self._maxRetracts[
countingForTool]:
if (retractionsPerExtruder[
countingForTool]
[-1] -
retractionsPerExtruder[
countingForTool]
[0]
) < purgeLength + purgedOffset[
countingForTool]:
# Delete extra travels
lineCount2 = temp_index + 1
while lines[
lineCount2].startswith(
"G0"):
if lines[
lineCount2
+
1].startswith(
"G0"):
del lines[
lineCount2]
else:
lineCount2 += 1
# Add purge commands
count_back = 1
while not GCodeUtils.charsInLine(
"GXY", lines[
temp_index
-
count_back]
):
count_back += 1
xPosition = GCodeUtils.getValue(
lines[temp_index -
count_back],
"X")
yPosition = GCodeUtils.getValue(
lines[temp_index -
count_back],
"Y")
#todo remove when firmware updated
if Application.getInstance(
).getMachineManager(
).activeMachineId == "Sigma":
lines[temp_index] = lines[temp_index] + " ;prevent filament grinding on T" + \
str(countingForTool) + "\nG1 F" + self._travelSpeed[countingForTool] + "\nT" + \
str(abs(countingForTool - 1)) + "\nT" + \
str(countingForTool) + "\nG91\nG1 F" + self._travelSpeed[countingForTool] + " Z" + str(self._retractionHopHeightAfterExtruderSwitch[countingForTool]) + "\nG90\nG1 F" + self._retractionPrimeSpeed[countingForTool] + " E" + \
str(round(eValue + purgeLength, 5)) + "\nG1 F" + \
self._purgeSpeed[countingForTool] + " E" + \
str(round(eValue + 2 * purgeLength, 5)) + "\nG4 P2000\nG1 F" + self._retractionRetractSpeed[countingForTool] + " E" + \
str(round(eValue + purgeLength, 5)) + "\nG92 E" + \
str(eValue) + "\nG1 F" + self._travelSpeed[countingForTool] + " X" + \
str(xPosition)+" Y" + str(yPosition)+"\nG91\nG1 F" + self._travelSpeed[countingForTool] + " Z-" + str(self._retractionHopHeightAfterExtruderSwitch[countingForTool]) + "\nG90 ;end of the filament grinding prevention protocol"
else:
lines[temp_index] = lines[temp_index] + " ;prevent filament grinding on T" + \
str(countingForTool) + "\nG1 F" + self._travelSpeed[countingForTool] + "\nG71\nG91\nG1 F" + self._travelSpeed[countingForTool] + " Z" + str(self._retractionHopHeightAfterExtruderSwitch[countingForTool]) + "\nG90\nG1 F" + self._retractionPrimeSpeed[countingForTool] + " E" + \
str(round(eValue + purgeLength, 5)) + "\nG1 F" + \
self._purgeSpeed[countingForTool] + " E" + \
str(round(eValue + 2 * purgeLength,5)) + "\nG4 P2000\nG1 F" + self._retractionRetractSpeed[countingForTool] + " E" + \
str(round(eValue + purgeLength, 5)) + "\nG92 E" + \
str(eValue) + "\nG1 F" + self._travelSpeed[countingForTool] + "\nG72\nG1 F" + self._travelSpeed[countingForTool] + " X" + \
str(xPosition)+" Y" + str(yPosition)+"\nG91\nG1 F" + self._travelSpeed[countingForTool] + " Z-" + str(self._retractionHopHeightAfterExtruderSwitch[countingForTool]) + "\nG90 ;end of the filament grinding prevention protocol"
del lines[temp_index +
1]
temp_index -= 1
retractionsPerExtruder[countingForTool] = []
purgedOffset[
countingForTool] = 0
while (retractionsPerExtruder[
countingForTool]
[-1] -
retractionsPerExtruder[
countingForTool]
[0]
) > purgeLength:
del retractionsPerExtruder[
countingForTool][
0]
else:
del retractionsPerExtruder[
countingForTool][0]
break
elif line.startswith(
"T") or line.startswith("G92"):
break
lineCount -= 1
except:
break
temp_index += 1
layer = "\n".join(lines)
self._gcode_list[index] = layer
Logger.log("d", "avoid_grinding_filament applied")
def _handleFixToolChangeZHop(self):
if self._fixToolChangeZHop and self._IDEXPrint:
self._startGcodeInfo.append("; - Fix Tool Change Z Hop")
# Fix hop
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
while temp_index < len(lines):
try:
line = lines[temp_index]
if GCodeUtils.charsInLine(["G0", "X", "Y", "Z"], line):
zValue = GCodeUtils.getValue(line, "Z")
line1 = lines[temp_index + 1]
line2 = lines[temp_index + 2]
line3 = lines[temp_index + 3]
line4 = lines[temp_index + 4]
if (
line == "T0" or line == "T1"
) and line1 == "G92 E0" and line2 == "G91" and "G1 F" in line3 and line4 == "G90":
if line == "T0":
countingForTool = 0
else:
countingForTool = 1
lines[temp_index +
3] = line3.split("Z")[0] + "Z" + str(
self.
_retractionHopHeightAfterExtruderSwitch[
countingForTool])
lineCount = 6 # According to extruder_start_gcode in Sigma Extruders definitions
while not lines[temp_index +
lineCount].startswith(";TYPE"):
line = lines[temp_index + lineCount]
if line.startswith("G"):
if lines[temp_index + lineCount +
1].startswith("G"):
del lines[temp_index + lineCount]
lineCount -= 1
else:
xValue = GCodeUtils.getValue(line, "X")
yValue = GCodeUtils.getValue(line, "Y")
lines[
temp_index +
lineCount] = "G0 F" + self._travelSpeed[
countingForTool] + " X" + str(
xValue) + " Y" + str(
yValue
) + "\nG0 Z" + str(zValue)
lineCount += 1
break
temp_index += 1
except:
break
layer = "\n".join(lines)
# Fix strange travel to X105 Y297
regex = r"\n.*X" + str(
int(self._container.getProperty(
"layer_start_x", "value"))) + " Y" + str(
int(
self._container.getProperty(
"layer_start_y", "value"))) + ".*"
layer = re.sub(regex, "", layer)
self._gcode_list[index] = layer
Logger.log("d", "fix_tool_change_z_hop applied")
def _handleFixTemperatureOscilation(self):
if self._fixTemperatureOscilation and self._IDEXPrint:
self._startGcodeInfo.append("; - Fix Temperature Oscilation")
# Fix oscilation when using Auto Temperature
if self._materialFlowDependentTemperature[
0] or self._materialFlowDependentTemperature[1]:
# Scan all temperatures
temperatures = [] # [(layerIndex, lineIndex, action, line)]
for index, layer in enumerate(self._gcode_list):
# if index > 2: # avoid altering layer 0
lines = layer.split("\n")
temp_index = 0
while temp_index < len(lines):
line = lines[temp_index]
if layer.startswith(";LAYER:"):
if line.startswith("M109"):
temperatures.append(
[index, temp_index, "heat", line])
elif line.startswith("T"):
temperatures.append(
[index, temp_index, "toolChange", line])
elif line.startswith("M104"):
if line.startswith("M104 T"):
temperatures.append(
[index, temp_index, "preheat", line])
else:
temperatures.append(
[index, temp_index, "unknown", line])
temp_index += 1
# Define "unknown" roles
for elementIndex in range(len(temperatures)):
action = temperatures[elementIndex][2]
if action == "unknown":
if elementIndex + 1 < len(temperatures):
if temperatures[elementIndex +
1][3].startswith("T"):
action = "coolDownActive"
else:
action = "setpoint"
temperatures[elementIndex][2] = action
elif action == "preheat":
temp_index = elementIndex - 1
while temp_index >= 0 and temperatures[temp_index][
2] != "toolChange":
if temperatures[temp_index][2] == 'preheat':
action = "coolDownIdle"
temperatures[temp_index][2] = action
break
temp_index -= 1
# Correct all temperatures
countingForTool = 0
for elementIndex in range(len(temperatures)):
action = temperatures[elementIndex][2]
if action == "toolChange":
if temperatures[elementIndex][3] == "T0":
countingForTool = 0
else:
countingForTool = 1
temperature_inertia_initial_fix = self._materialInitialPrintTemperature[
countingForTool] - self._materialPrintTemperature[
countingForTool]
temperature_inertia_final_fix = self._materialFinalPrintTemperature[
countingForTool] - self._materialPrintTemperature[
countingForTool]
if action == "preheat":
temp_index = elementIndex + 1
toolChanged = False
while temp_index < len(temperatures):
if temperatures[temp_index][2] == "toolChange":
if toolChanged:
break
else:
toolChanged = True
elif temperatures[temp_index][2] == "heat":
heatIndex = temp_index
elif toolChanged and temperatures[temp_index][
2] == "setpoint":
correctTemperatureValue = GCodeUtils.getValue(
temperatures[temp_index][3],
"S") + temperature_inertia_initial_fix
temperatures[elementIndex][3] = temperatures[
elementIndex][3].split("S")[0] + "S" + str(
correctTemperatureValue)
temperatures[heatIndex][3] = temperatures[
heatIndex][3].split("S")[0] + "S" + str(
correctTemperatureValue)
break
temp_index += 1
elif action == "coolDownIdle":
correctTemperatureValue = max(
GCodeUtils.getValue(temperatures[elementIndex][3],
"S") +
temperature_inertia_initial_fix,
self._materialStandByTemperature[countingForTool])
temperatures[elementIndex][
3] = temperatures[elementIndex][3].split(
"S")[0] + "S" + str(correctTemperatureValue)
elif action == "coolDownActive":
temp_index = elementIndex - 1
while temp_index >= 0:
if temperatures[temp_index][2] == "coolDownActive":
break
if temperatures[temp_index][2] == "setpoint":
correctTemperatureValue = GCodeUtils.getValue(
temperatures[temp_index][3],
"S") + temperature_inertia_final_fix
temperatures[elementIndex][3] = temperatures[
elementIndex][3].split("S")[0] + "S" + str(
correctTemperatureValue)
break
temp_index -= 1
# Set back new corrected temperatures
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
while temp_index < len(lines) and len(temperatures) > 0:
if index == temperatures[0][
0] and temp_index == temperatures[0][1]:
lines[temp_index] = temperatures[0][3]
del temperatures[0]
temp_index += 1
layer = "\n".join(lines)
self._gcode_list[index] = layer
# Force standby temperature if it exceeds Minimal Time before first print of this hotend
idleTime = 0
lookingForIdleExtruder = True
applied = False
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
if layer.startswith(";LAYER:"):
temp_index = 0
while not applied and temp_index < len(lines):
# look for the idle extruder at start
if lookingForIdleExtruder:
if lines[temp_index].startswith("T1"):
idleExtruder = 0
lookingForIdleExtruder = False
elif GCodeUtils.charsInLine(
["G1", "F", "X", "Y", "E"], lines[temp_index]):
idleExtruder = 1
lookingForIdleExtruder = False
# once idle extruder is found, look when it enters
elif (idleExtruder == 0
and lines[temp_index].startswith("T0")) or (
idleExtruder == 1
and lines[temp_index].startswith("T1")):
# apply fix if needed
if layer.startswith(";LAYER:0"):
applied = True
break
else:
idleTime = float(
lines[-2].split('TIME_ELAPSED:')[1])
if self._machineMinCoolHeatTimeWindow[
idleExtruder] > 0 and idleTime >= self._machineMinCoolHeatTimeWindow[
idleExtruder]:
lines[temp_index] = "M109 T" + str(
idleExtruder
) + " S" + str(
self._materialPrintTemperatureLayer0[
idleExtruder]
) + " ;T" + str(
idleExtruder
) + " set to initial layer temperature\n" + lines[
temp_index]
applied = True
temp_index += 1
if applied:
if not layer.startswith(";LAYER:0"):
layer = "\n".join(lines)
self._gcode_list[index] = layer
break
if applied and not layer.startswith(";LAYER:0"):
for index, layer in enumerate(self._gcode_list):
if layer.startswith(";LAYER:"):
layer = "M104 T" + str(idleExtruder) + " S" + str(
self._materialStandByTemperature[idleExtruder]
) + " ;T" + str(
idleExtruder
) + " set to standby temperature\n" + layer
break
self._gcode_list[index] = layer
Logger.log("d", "fix_temperature_oscilation applied")
def _handleFixFirstRetract(self):
if self._fixFirstRetract:
self._startGcodeInfo.append("; - Fix First Extrusion")
startGcodeCorrected = False
usingT1 = False
eValue = 0
fixExtruder = "T0"
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
while temp_index < len(lines):
try:
line = lines[temp_index]
# Get retract value before starting the first layer
if not layer.startswith(";LAYER") and line.startswith(
"T1"):
lineCount = 0
while not lineCount > len(
lines) - temp_index or lines[
temp_index +
lineCount].startswith("T0"):
line = lines[temp_index + lineCount]
if GCodeUtils.charsInLine(["G", "F", "E-"],
line):
eValue = GCodeUtils.getValue(line, "E")
lineCount += 1
usingT1 = True
# Fix the thing
elif layer.startswith(";LAYER:") and usingT1:
line1 = lines[temp_index + 1]
line2 = lines[temp_index + 2]
line3 = lines[temp_index + 3]
line4 = lines[temp_index + 4]
line5 = lines[temp_index + 5]
# detect first tool printing and remove unintentional retract before T1
if temp_index == 0 and GCodeUtils.charsInLine(
["G1 F", "E"], line1
) and line2 == "G92 E0" and line4 == "T1" and line5 == "G92 E0":
del lines[temp_index + 1]
del lines[temp_index + 1]
temp_index -= 1
fixExtruder = "T1"
# Add proper prime command to T1
elif fixExtruder == "T0":
lineCount = 0
while not lines[temp_index +
lineCount].startswith(";TYPE"):
line = lines[temp_index + lineCount]
if GCodeUtils.charsInLine(
["G0", "F", "X", "Y"], line):
primeCommandLine = "G1 F" + self._retractionPrimeSpeed[
0] + " E0\nG92 E0 ; T0fix"
lines[
temp_index + lineCount +
1] = lines[
temp_index + lineCount +
1] + "\n" + primeCommandLine + "\n"
if self._both_extruders:
fixExtruder = "T1"
else:
fixExtruder = "none"
break
lineCount += 1
temp_index += lineCount
elif fixExtruder == "T1" and line == "T1" and line1 == "G92 E0" and line2 == "G91" and "G1 F" in line3 and line4 == "G90":
lineCount = 6 # According to extruder_start_gcode in Sigma Extruders definitions
while not lines[temp_index +
lineCount].startswith(";TYPE"):
line = lines[temp_index + lineCount]
if GCodeUtils.charsInLine(
["G0", "F", "X", "Y"], line):
if GCodeUtils.charsInLine(
["G1 F", " E"],
lines[temp_index + lineCount +
1]):
del lines[temp_index + lineCount +
1]
primeCommandLine = "G1 F" + self._retractionPrimeSpeed[
1] + " E" + str(abs(
eValue)) + "\nG92 E0 ; T1fix"
lines[
temp_index + lineCount +
1] = lines[
temp_index + lineCount +
1] + "\n" + primeCommandLine + "\n"
break
lineCount += 1
startGcodeCorrected = True
temp_index += 1
except:
break
layer = "\n".join(lines)
self._gcode_list[index] = layer
if startGcodeCorrected:
break
Logger.log("d", "fix_retract applied")
def _handleFixTemperatureOscilation(self):
if self._fixTemperatureOscilation and self._both_extruders:
self._startGcodeInfo.append("; - Fix Temperature Oscilation")
# Scan all temperatures
temperatures = [] # [(layerIndex, lineIndex, action, line)]
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
while temp_index < len(lines):
line = lines[temp_index]
if layer.startswith(";LAYER:"):
if line.startswith("M109"):
temperatures.append(
[index, temp_index, "heat", line])
elif line.startswith("T"):
temperatures.append(
[index, temp_index, "toolChange", line])
elif line.startswith("M104"):
if line.startswith("M104 T"):
temperatures.append(
[index, temp_index, "preheat", line])
else:
temperatures.append(
[index, temp_index, "unknown", line])
temp_index += 1
# Define "unknown" roles
for elementIndex in range(len(temperatures)):
action = temperatures[elementIndex][2]
if action == "unknown":
if elementIndex + 1 < len(temperatures):
if temperatures[elementIndex + 1][3].startswith("T"):
action = "coolDownActive"
else:
action = "setpoint"
temperatures[elementIndex][2] = action
elif action == "preheat":
temp_index = elementIndex - 1
while temp_index >= 0 and temperatures[temp_index][
2] != "toolChange":
if temperatures[temp_index][2] == 'preheat':
action = "coolDownIdle"
temperatures[temp_index][2] = action
break
temp_index -= 1
# Correct all temperatures
countingForTool = 0
for elementIndex in range(len(temperatures)):
action = temperatures[elementIndex][2]
if action == "toolChange":
if temperatures[elementIndex][3] == "T0":
countingForTool = 0
else:
countingForTool = 1
temperature_inertia_initial_fix = self._materialInitialPrintTemperature[
countingForTool] - self._materialPrintTemperature[
countingForTool]
temperature_inertia_final_fix = self._materialFinalPrintTemperature[
countingForTool] - self._materialPrintTemperature[
countingForTool]
if action == "preheat":
temp_index = elementIndex + 1
toolChanged = False
while temp_index < len(temperatures):
if temperatures[temp_index][2] == "toolChange":
if toolChanged:
break
else:
toolChanged = True
elif temperatures[temp_index][2] == "heat":
heatIndex = temp_index
elif toolChanged and temperatures[temp_index][
2] == "setpoint":
correctTemperatureValue = GCodeUtils.getValue(
temperatures[temp_index][3],
"S") + temperature_inertia_initial_fix
temperatures[elementIndex][3] = temperatures[
elementIndex][3].split("S")[0] + "S" + str(
correctTemperatureValue)
temperatures[heatIndex][3] = temperatures[
heatIndex][3].split("S")[0] + "S" + str(
correctTemperatureValue)
break
temp_index += 1
elif action == "coolDownIdle":
correctTemperatureValue = max(
GCodeUtils.getValue(temperatures[elementIndex][3], "S")
+ temperature_inertia_initial_fix,
self._materialStandByTemperature[countingForTool])
temperatures[elementIndex][3] = temperatures[elementIndex][
3].split("S")[0] + "S" + str(correctTemperatureValue)
elif action == "coolDownActive":
temp_index = elementIndex - 1
while temp_index >= 0:
if temperatures[temp_index][2] == "coolDownActive":
break
if temperatures[temp_index][2] == "setpoint":
correctTemperatureValue = GCodeUtils.getValue(
temperatures[temp_index][3],
"S") + temperature_inertia_final_fix
temperatures[elementIndex][3] = temperatures[
elementIndex][3].split("S")[0] + "S" + str(
correctTemperatureValue)
break
temp_index -= 1
# Set back new corrected temperatures
for index, layer in enumerate(self._gcode_list):
lines = layer.split("\n")
temp_index = 0
while temp_index < len(lines) and len(temperatures) > 0:
if index == temperatures[0][
0] and temp_index == temperatures[0][1]:
lines[temp_index] = temperatures[0][3]
del temperatures[0]
temp_index += 1
layer = "\n".join(lines)
self._gcode_list[index] = layer
Logger.log("d", "fix_temperature_oscilation applied")