def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("majorFreq",
"Major frequency",
units="per rotation",
default=3.0,
min=0.0,
max=179.0,
randRange=(0.1, 20.)),
DialogFloat("majorAmp",
"Major amplitude",
units=units,
default=inchesToUnits(4.0, units),
min=0.0,
max=inchesToUnits(6.0, units)),
DialogFloat("minorFreq",
"Minor frequency mod",
units="percent",
default=.01,
min=-0.03,
max=.03),
DialogFloat("minorAmp",
"Minor amplitude",
units="degrees",
default=20.0,
min=0.0,
max=45.0),
DialogBreak(),
DialogFloat("r1",
"Radius start",
units=units,
default=1.0,
min=0.0,
max=max(width, length) * .9),
DialogFloat("r2",
"Radius end",
units=units,
default=min(width, length) / 2,
min=1.0,
max=max(width, length) * 1.5),
DialogFloat("turns", "Turns", default=20.0, min=0.1, max=80),
DialogInt("angleRate",
"Sample rate",
units="degrees",
default=5,
min=1,
max=10),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogInt("points", "Polygon points", default=10, min=3, max=50),
DialogInt("interp",
"Interpolated points",
default=5,
min=0,
max=10),
DialogInt("seed",
"Random seed",
default=1,
min=0,
max=10000.0,
rbutton=True),
DialogFloat("randomness",
"Randomness",
units="percent",
default=10.,
min=0.,
max=100.),
DialogFloat("rotation",
"Rotation",
units="degrees",
default=0.,
min=-180.,
max=180.),
DialogBreak(),
DialogInt("polygons", "Polygon Count", default=10, min=1, max=100),
DialogFloat("r1",
"First radius",
units=units,
min=0.0,
max=max(width, length) * 2),
DialogFloat("r2",
"Second radius",
units=units,
default=min(width, length) / 2,
min=0.0,
max=max(width, length) * 2),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, cols, rows):
self.end = (cols + rows) * 2
self.editor = [
DialogFloat("angle",
"Source angle",
units="degrees",
default=2.0,
min=0.0,
max=720.0,
step=1.),
DialogFloat("degsPerFrame",
"Degrees per refresh",
units="degrees",
default=2.0,
min=0.0,
max=30.0,
step=1.),
DialogFloat("degsSpan",
"Color span",
units="degrees",
default=0.5,
min=0.00001,
max=360.0,
step=.5),
DialogInt("delaySteps", "Delay steps", default=0, min=0, max=500),
DialogBreak(),
DialogInt("brightness",
"Brightness",
units="percent",
default=50,
min=0,
max=100),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("knots", "Number of Knots", default=5, min=0, max=20),
DialogFloat("rKnot",
"Maximum Knot Radius",
units=units,
default=inchesToUnits(5.0, units),
min=inchesToUnits(1.0, units),
max=max(width, length)),
DialogInt("seed",
"Random seed",
default=1,
min=0,
max=10000,
rbutton=True),
DialogInt("xLines",
"Number of points/line",
default=200,
min=50,
max=600),
DialogInt("yLines", "Number of lines", default=40, min=5, max=100),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width (x)", units=units, default=width),
DialogFloat("length", "Length (y)", units=units, default=length),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("xSpacing",
"X Spacing (0 for none)",
units=units,
default=0.0,
min=0.,
max=width),
DialogFloat("ySpacing",
"Y Spacing (0 for none)",
units=units,
default=ballSize,
min=0.,
max=length),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=1000.0),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=1000.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("depth", "Depth of fractility", default=2, max=10),
DialogFloat("branchProbability",
"Probability of branching",
default=0.7,
min=0.0,
max=1.0),
DialogFloat("percent", "Fractility size decrease", default=0.3),
DialogYesNo("round", "Rounded crystals", default=False),
DialogInt("seed",
"Random seed",
default=1,
min=0,
max=10000,
rbutton=True),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
self.table = [(0.0, 0.0), (width, length)]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogInts("teeths",
"Wheel Teeth",
units="n1,n2,...",
default=[40, -30],
min=-60,
max=60,
minNums=2,
maxNums=3),
DialogInt("resolution", "Resolution", default=7, min=1, max=60),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("radius",
"Radius",
units=units,
default=min(width, length) / 2,
min=1.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("h",
"Coefficient 'H'",
default=0.01,
min=.001,
max=.05),
DialogFloat("a", "Coefficient 'A'", default=10.0, min=.5,
max=45.0),
DialogFloat("b", "Coefficient 'B'", default=28.0, min=.5,
max=45.0),
DialogFloat("c",
"Coefficient 'C'",
default=8.0 / 3.0,
min=.1,
max=5.0),
DialogInt("points", "Number of points", default=5000),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=1000.0),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=1000.0),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("radius",
"Radius",
units=units,
default=min(width, length) / 2,
min=1.0,
max=max(width, length) * 2.0),
DialogFloat("turns", "Turns", default=10.0, min=.1, max=200.0),
DialogFloat("angleStart", "Starting angle", units="degrees"),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
min=1,
default=5.0),
DialogYesNo("fill", "Fill", default=False),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("depth", "Depth of fractility", default=8, min=1,
max=14),
DialogYesNo("fit", "Auto-fit to table", default=False),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width (x)", units=units, default=width),
DialogFloat("length", "Length (y)", units=units, default=length),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
radius = min(width, length) / 2.0
mRadius = max(width, length) / 2.0
self.editor = [
DialogFloat("petals", "Petals", default=7.0, min=0.001, max=45.0),
DialogFloat("angleStart",
"Starting angle",
units="degrees",
min=-180.,
max=180.),
DialogFloat("angleShift",
"Shift angle",
units="degrees",
default=0.0,
min=-10.0,
max=10.0),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=3.0,
min=1.0,
max=10.0),
DialogInt("turns",
"Turns",
default=20,
min=1,
max=int(mRadius / ballSize * 4)),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=radius * .15,
min=0.0,
max=mRadius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=radius,
min=1.0,
max=mRadius),
]
def __init__(self, width, length, ballSize, units):
scale = width / length
self.editor = [
DialogInt("rows", "Rows", default=8, min=1, max=20),
DialogInt("cols",
"Columns",
default=int(8 * scale),
min=1,
max=int(20 * scale)),
DialogFloat("turns", "Turns", default=3.0, min=1, max=15.0),
DialogFloat("angleRate",
"Sample Rate",
units="degrees",
default=15.0,
min=-360.0,
max=360.0),
DialogFloat("sizeModifier",
"Size Modifier",
units="percent",
default=1.,
min=.75,
max=1.25),
DialogBreak(),
DialogFloat("xCorner",
"X Corner",
units=units,
default=0.0,
min=0.0,
max=width,
randRange=(0., 0.)),
DialogFloat("yCorner",
"Y Corner",
units=units,
default=0.0,
min=0.0,
max=length,
randRange=(0., 0.)),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=width,
randRange=(width, width)),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=length,
randRange=(length, length)),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("sHeight",
"Shingle Height",
units=units,
default=inchesToUnits(2, units),
min=inchesToUnits(0.1, units),
max=inchesToUnits(5, units)),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width (x)", units=units, default=width),
DialogFloat("length", "Length (y)", units=units, default=length),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("repetitions", "Repetitions", default=3, min=1, max=20),
DialogFloat("heading",
"Initial heading",
units="degrees",
default=0.0),
DialogFloat("angle", "Angle", units="degrees", default=90.0),
DialogYesNo("round", "Rounded edges", default=False),
DialogBreak(),
DialogStr("axiom", "Axiom", length=30),
DialogStr("rule1", "Rule 1", length=30),
DialogStr("rule2", "Rule 2", length=30),
DialogStr("rule3", "Rule 3", length=30),
DialogStr("rule4", "Rule 4", length=30),
DialogStr("rule5", "Rule 5", length=30),
DialogStr("rule6", "Rule 6", length=30),
DialogBreak(),
DialogFloat("xOrigin", "X Origin", units=units, default=0.0),
DialogFloat("yOrigin", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width", units=units, default=width),
DialogFloat("length", "Length", units=units, default=length),
]
self.MAX_LEN = 50000
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("wHeight",
"Wave Height",
units=units,
default=inchesToUnits(1.0, units),
min=0.0,
max=length),
DialogInt("lines", "Lines", default=40, min=5, max=100),
DialogInt("xCount",
"Points per line",
default=100,
min=10,
max=160),
DialogFloat("waves",
"Waves per Line",
default=3.0,
min=0.0,
max=45.0),
DialogFloat("shift",
"Shift per Line",
units="degrees",
default=5.0,
min=0.0,
max=10.0),
DialogFloat("increment",
"Wave increment",
units="percent",
default=100.0,
min=95.0,
max=105.0),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=1000.0),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=1000.0),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
rippleSize = min(width, length) * .05
radius = max(width, length) / 2.0
self.editor = [
DialogInt("rays", "Ray count", default=12, min=1, max=60),
DialogInt("rayWidth",
"Ray width",
units="degrees",
default=10,
min=1,
max=60),
DialogFloat("ripples",
"Number of ripples",
default=2.0,
min=0.0,
max=20.0),
DialogFloat("rippleSize",
"Size of ripples",
units=units,
default=rippleSize,
min=0.,
max=3 * rippleSize),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=2.0,
min=0.0,
max=radius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=min(width, length) / 2,
min=1.0,
max=radius),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("r1",
"First radius",
units=units,
min=0.0,
max=max(width, length) * 2),
DialogFloat("r2",
"Second radius",
units=units,
default=min(width, length) / 2,
min=0.0,
max=max(width, length) * 2),
DialogFloat("turns", "Turns", default=10., min=0.1, max=100.),
DialogFloat("angleStart",
"Starting angle",
units="degrees",
min=0.0,
max=360.0,
step=15.),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=15.0,
min=-180.0,
max=180.0),
DialogFloat("base",
"Growth base power",
default=1.0,
min=0.25,
max=10.0),
DialogYesNo("fill", "Fill in spiral"),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("innerRadius",
"Inner radius",
units=units,
min=0.0,
max=min(width, length) / 2.),
DialogFloat("turns", "Turns", default=5., min=1.0, max=50.0),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=11.0,
min=1,
max=45.0),
DialogFloat("curveFactor",
"Curve factor",
default=1.,
min=-6.,
max=6.),
DialogFloat("scaleFactor",
"Scale factor",
default=1.,
min=.01,
max=10.0),
DialogFloat("logGrowth",
"Logarithmic growth",
units="percent",
default=0.,
min=0.,
max=2.),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
self.maxRadius = 2. * sqrt(width**2 + length**2)
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogInt("points", "Points", min=3, max=75, default=5),
DialogFloat("innerRadius1",
"Inner radius 1",
units=units,
default=inchesToUnits(3.0, units),
min=1.0,
max=max(width, length) / 2),
DialogFloat("outerRadius1",
"Outer radius 1",
units=units,
default=min(width, length) / 2,
min=2.0,
max=max(width, length) / 2),
DialogFloat("innerRadius2",
"Inner radius 2",
units=units,
default=0.0),
DialogFloat("outerRadius2",
"Outer radius 2",
units=units,
default=inchesToUnits(5.0, units)),
DialogFloat("angleStart", "Starting angle", units="degrees"),
DialogFloat("angleShift",
"Shift angle",
units="degrees",
default=0.0,
min=0.0,
max=15.0),
DialogInt("steps", "Number of stars", default=5, min=0, max=40),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogStr("expression",
"Expression",
default='cos( 3.*radians( sqrt(x*x+y*y )))',
length=45),
DialogFloat("xStart", "X Start", default=-180.0),
DialogFloat("xEnd", "X End", default=180.0),
DialogInt("xPoints", "X Points", default=45, min=2, max=180),
DialogFloat("yStart", "Y Start", default=-180.0),
DialogFloat("yEnd", "Y End", default=180.0),
DialogInt("yPoints", "Y Points", default=45, min=2, max=180),
DialogFloat("zScale", "Z Scale", default=1.0, min=0.01, max=10.0),
DialogFloat("xyAngle",
"Horizontal Rotation",
units="degrees",
default=45.0,
min=-45.0,
max=45.0),
DialogFloat("yzAngle",
"Vertical Tilt",
units="degrees",
default=45.0,
min=0.0,
max=90.0),
DialogFloat("zoom", "Zoom", default=1.0, min=0.25, max=10.0),
DialogYesNo("topDown", "Top Down", default=True),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=width * 4),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=length * 4),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("decay", "Decay Rate", default=0.0001, min=.00000001),
DialogInt("steps", "Number of Steps", default=1000, min=1000, max=20000),
DialogFloat("f1", "X1 Frequency", default=5.0, min=0.1, max=30.0, rRound=0),
DialogFloat("f2", "X2 Frequency", default=10.0, min=0.1, max=30.0, rRound=0),
DialogFloat("f3", "Y1 Frequency", default=7.0, min=0.1, max=30.0, rRound=0),
DialogFloat("f4", "Y2 Frequency", default=12.0, min=0.1, max=30.0, rRound=0),
DialogFloat("a1", "X1 Amplitude", units=units, default=width / 4.0, min=0.0),
DialogFloat("a2", "X2 Amplitude", units=units, default=width / 4.0, min=0.0),
DialogFloat("a3", "Y1 Amplitude", units=units, default=length / 4.0, min=0.0),
DialogFloat("a4", "Y2 Amplitude", units=units, default=length / 4.0, min=0.0),
DialogFloat("p1", "X1 Phase", units="degrees", default=0.0, min=0.0, max=180.0, rRound=0),
DialogFloat("p2", "X2 Phase", units="degrees", default=0.0, min=0.0, max=180.0, rRound=0),
DialogFloat("p3", "Y1 Phase", units="degrees", default=0.0, min=0.0, max=180.0, rRound=0),
DialogFloat("p4", "Y2 Phase", units="degrees", default=0.0, min=0.0, max=180.0, rRound=0),
DialogBreak(),
DialogFloat("xCenter", "X Center", units=units, default=width / 2.0),
DialogFloat("yCenter", "Y Center", units=units, default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("columns",
"Columns",
default=int(width / (ballSize * 1.25)),
min=3,
max=int(width / ballSize)),
DialogInt("rows",
"Rows",
default=int(length / (ballSize * 1.25)),
min=3,
max=int(length / ballSize)),
DialogInt("seed",
"Random seed",
default=1,
min=0,
max=10000.0,
rbutton=True),
DialogBreak(),
DialogFloat("width",
"Width",
default=width,
units=units,
min=1.0,
max=width),
DialogFloat("length",
"Length",
default=length,
units="units",
min=1.0,
max=length),
DialogFloat("xOffset",
"Starting x location",
default=0.0,
units=units),
DialogFloat("yOffset",
"Starting y location",
default=0.0,
units=units),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
radius = min(width, length) / 2.0
mRadius = max(width, length) / 2.0
self.editor = [
DialogInt("cwArms", "CW arms", default=12, min=1, max=120),
DialogFloat("cwAngular",
"CW angular distance",
default=30.0,
units="degrees"),
DialogInt("ccwArms", "CCW arms", default=12, min=1, max=120),
DialogFloat("ccwAngular",
"CCW angular distance",
default=30.0,
units="degrees"),
DialogInt("points", "Points per arm", default=10, min=2),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=radius * 0.15,
min=0.0,
max=mRadius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=radius,
min=1.0,
max=mRadius),
]
def __init__(self, width, length, ballSize, units):
self.ballSize = ballSize
rockSize = inchesToUnits(3, units)
self.editor = [
DialogInt("rocks", "Number of rocks", default=5, min=1, max=25),
DialogFloat("minRockSize",
"Minimum rock size",
units=units,
min=inchesToUnits(.25, units),
max=rockSize,
default=inchesToUnits(1.0, units)),
DialogFloat("maxRockSize",
"Maximum rock size",
units=units,
min=inchesToUnits(.25, units),
max=rockSize,
default=inchesToUnits(1.0, units)),
DialogInt("rakeSize",
"Rake teeth",
units="tines",
min=2,
max=5,
default=3),
DialogInt("seed",
"Random Seed",
default=1,
min=0,
max=10000,
rbutton=True),
DialogBreak(),
DialogFloat("ballSize",
"Ball size",
units=units,
min=.25,
default=ballSize),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width (x)", units=units, default=width),
DialogFloat("length", "Length (y)", units=units, default=length),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("xSquares", "Columns (X)", default=2, min=1, max=40),
DialogInt("ySquares", "Rows (Y)", default=2, min=1, max=40),
DialogInt("xLines", "X Fill Lines", default=4, min=1, max=16),
DialogInt("yLines", "Y Fill Lines", default=4, min=1, max=16),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=width),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=length),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("radius",
"Starting Radius",
units=units,
default=min(width, length) / 2.,
min=3.,
max=max(width, length)),
DialogFloat("angle",
"Phyllotaxic Angle",
units="degrees",
default=137.51,
min=1,
max=180.0),
DialogFloat("reductionRate",
"Reduction Rate",
default=0.976,
min=.85,
max=.99),
DialogFloat("petalWidth",
"Petal Width",
units="degrees",
default=15.,
min=5.,
max=90.),
DialogInt("iterations", "Iterations", default=100, min=1, max=500),
DialogYesNo("round", "Rounded edges", default=False),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFile("filename",
"File Name",
default=CLIPART_PATH,
filter='.dxf'),
DialogInt("iterations",
"Number of Fill Iterations",
default=0,
min=0,
max=60),
DialogFloat("decrement",
"Fill Decrement",
units=units,
default=0.5,
min=0.0,
max=inchesToUnits(2.0, units)),
DialogFloat("ballSize",
"Ball Size",
units=units,
default=ballSize,
min=inchesToUnits(0.25, units)),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width (x)",
units=units,
default=width,
min=1.0,
max=width * 2),
DialogFloat("length",
"Length (y)",
units=units,
default=length,
min=1.0,
max=length * 2),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("aFreq",
"A Frequency",
default=8.0,
min=0.001,
max=100.0,
rRound=0),
DialogFloat("bFreq",
"B Frequency",
default=9.0,
min=0.001,
max=100.0,
rRound=0),
DialogFloat("delta", "Delta", units="degrees", default=0.0),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("width",
"Width (x)",
units=units,
default=width,
min=1.0,
max=1000.0),
DialogFloat("length",
"Length (y)",
units=units,
default=length,
min=1.0,
max=1000.0),
]
def __init__(self, width, length, ballSize, units):
radius = min(width, length) * .1
self.editor = [
DialogFloat("radius",
"Radius",
units=units,
default=radius,
min=1.0,
max=radius * 4),
DialogInt("rings", "Rings", default=3, min=1, max=8),
DialogFloat("turns", "Turns", default=3, min=0.1, max=24.0),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=15.0,
min=-720.0,
max=720.0),
DialogFloat("factor",
"Spacing factor",
default=1.0,
min=.5,
max=1.5),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0,
min=0.0,
max=width),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0,
min=0.0,
max=length),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("radius",
"Starting Radius",
units=units,
default=min(width, length) / 2.,
min=3.,
max=max(width, length)),
DialogFloat("angle",
"Phyllotaxic Angle",
units="degrees",
default=137.51,
min=1,
max=180.0),
DialogFloat("reductionRate",
"Reduction Rate",
default=0.976,
min=.85,
max=.99),
DialogFloat("circleDiameter",
"Circle Diameter",
units=units,
default=3.),
DialogInt("iterations", "Iterations", default=60, min=1, max=200),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]