Ejemplo n.º 1
0
class FrameMain(wx.Frame):
    def __init__(self, title, pool):

        self.grid = True

        self.pool = pool
        self.lock = threading.Lock()

        self.sdr = None
        self.threadScan = None
        self.threadUpdate = None
        self.threadLocation = None

        self.stopAtEnd = False
        self.stopScan = False

        self.dlgCal = None

        self.menuNew = None
        self.menuOpen = None
        self.menuSave = None
        self.menuExportScan = None
        self.menuExportImage = None
        self.menuExportGeo = None
        self.menuPreview = None
        self.menuPage = None
        self.menuPrint = None
        self.menuProperties = None
        self.menuPref = None
        self.menuAdvPref = None
        self.menuDevicesRtl = None
        self.menuDevicesGps = None
        self.menuReset = None
        self.menuClearSelect = None
        self.menuShowMeasure = None
        self.menuStart = None
        self.menuStop = None
        self.menuStopEnd = None
        self.menuCompare = None
        self.menuCal = None

        self.popupMenu = None
        self.popupMenuStart = None
        self.popupMenuStop = None
        self.popupMenuStopEnd = None
        self.popupMenuRangeLim = None
        self.popupMenuPointsLim = None
        self.popupMenuClearSelect = None
        self.popupMenuShowMeasure = None

        self.graph = None
        self.toolbar = None
        self.canvas = None
        self.mouseZoom = None
        self.mouseSelect = None

        self.buttonStart = None
        self.buttonStop = None
        self.controlGain = None
        self.choiceMode = None
        self.choiceDwell = None
        self.choiceNfft = None
        self.spinCtrlStart = None
        self.spinCtrlStop = None
        self.checkUpdate = None
        self.checkGrid = None
        self.choiceDisplay = None

        self.spectrum = {}
        self.scanInfo = ScanInfo()
        self.location = {}
        self.isSaved = True

        self.settings = Settings()
        self.devicesRtl = get_devices_rtl(self.settings.devicesRtl)
        self.filename = ""
        self.oldCal = 0

        self.pageConfig = wx.PageSetupDialogData()
        self.pageConfig.GetPrintData().SetOrientation(wx.LANDSCAPE)
        self.pageConfig.SetMarginTopLeft((20, 20))
        self.pageConfig.SetMarginBottomRight((20, 20))
        self.printConfig = wx.PrintDialogData(self.pageConfig.GetPrintData())
        self.printConfig.EnableSelection(False)
        self.printConfig.EnablePageNumbers(False)

        wx.Frame.__init__(self, None, title=title)

        self.Bind(wx.EVT_CLOSE, self.__on_exit)

        self.status = Statusbar(self)
        self.SetStatusBar(self.status)

        add_colours()
        self.__create_widgets()
        self.__create_menu()
        self.__create_popup_menu()
        self.__set_control_state(True)
        self.Show()

        displaySize = wx.DisplaySize()
        toolbarSize = self.toolbar.GetBestSize()
        self.SetClientSize((toolbarSize[0] + 10, displaySize[1] / 2))
        self.SetMinSize((displaySize[0] / 4, displaySize[1] / 4))

        self.Connect(-1, -1, EVENT_THREAD, self.__on_event)

        self.SetDropTarget(DropTarget(self))

        self.steps = 0
        self.stepsTotal = 0

    def __create_widgets(self):
        panel = wx.Panel(self)

        self.graph = PanelGraph(panel, self, self.settings, self.__on_motion)
        self.toolbar = wx.Panel(panel)

        self.buttonStart = wx.Button(self.toolbar, wx.ID_ANY, 'Start')
        self.buttonStop = wx.Button(self.toolbar, wx.ID_ANY, 'Stop')
        self.buttonStart.SetToolTip(wx.ToolTip('Start scan'))
        self.buttonStop.SetToolTip(wx.ToolTip('Stop scan'))
        self.Bind(wx.EVT_BUTTON, self.__on_start, self.buttonStart)
        self.Bind(wx.EVT_BUTTON, self.__on_stop, self.buttonStop)

        textRange = wx.StaticText(self.toolbar, label="Range (MHz)",
                                  style=wx.ALIGN_CENTER)
        textStart = wx.StaticText(self.toolbar, label="Start")
        textStop = wx.StaticText(self.toolbar, label="Stop")

        self.spinCtrlStart = wx.SpinCtrl(self.toolbar)
        self.spinCtrlStop = wx.SpinCtrl(self.toolbar)
        self.spinCtrlStart.SetToolTip(wx.ToolTip('Start frequency'))
        self.spinCtrlStop.SetToolTip(wx.ToolTip('Stop frequency'))
        self.spinCtrlStart.SetRange(F_MIN, F_MAX - 1)
        self.spinCtrlStop.SetRange(F_MIN + 1, F_MAX)
        self.Bind(wx.EVT_SPINCTRL, self.__on_spin, self.spinCtrlStart)
        self.Bind(wx.EVT_SPINCTRL, self.__on_spin, self.spinCtrlStop)

        textGain = wx.StaticText(self.toolbar, label="Gain (dB)")
        self.controlGain = wx.Choice(self.toolbar, choices=[''])

        textMode = wx.StaticText(self.toolbar, label="Mode")
        self.choiceMode = wx.Choice(self.toolbar, choices=MODE[::2])
        self.choiceMode.SetToolTip(wx.ToolTip('Scanning mode'))

        textDwell = wx.StaticText(self.toolbar, label="Dwell")
        self.choiceDwell = wx.Choice(self.toolbar, choices=DWELL[::2])
        self.choiceDwell.SetToolTip(wx.ToolTip('Scan time per step'))

        textNfft = wx.StaticText(self.toolbar, label="FFT size")
        self.choiceNfft = wx.Choice(self.toolbar, choices=map(str, NFFT))
        self.choiceNfft.SetToolTip(wx.ToolTip('Higher values for greater'
                                              'precision'))

        textDisplay = wx.StaticText(self.toolbar, label="Display")
        self.choiceDisplay = wx.Choice(self.toolbar, choices=DISPLAY[::2])
        self.Bind(wx.EVT_CHOICE, self.__on_choice, self.choiceDisplay)
        self.choiceDisplay.SetToolTip(wx.ToolTip('Spectrogram available in'
                                                 'continuous mode'))

        grid = wx.GridBagSizer(5, 5)
        grid.Add(self.buttonStart, pos=(0, 0), span=(3, 1),
                 flag=wx.ALIGN_CENTER)
        grid.Add(self.buttonStop, pos=(0, 1), span=(3, 1),
                 flag=wx.ALIGN_CENTER)
        grid.Add((20, 1), pos=(0, 2))
        grid.Add(textRange, pos=(0, 3), span=(1, 4), flag=wx.ALIGN_CENTER)
        grid.Add(textStart, pos=(1, 3), flag=wx.ALIGN_CENTER)
        grid.Add(self.spinCtrlStart, pos=(1, 4))
        grid.Add(textStop, pos=(1, 5), flag=wx.ALIGN_CENTER)
        grid.Add(self.spinCtrlStop, pos=(1, 6))
        grid.Add(textGain, pos=(0, 7), flag=wx.ALIGN_CENTER)
        grid.Add(self.controlGain, pos=(1, 7), flag=wx.ALIGN_CENTER)
        grid.Add((20, 1), pos=(0, 8))
        grid.Add(textMode, pos=(0, 9), flag=wx.ALIGN_CENTER)
        grid.Add(self.choiceMode, pos=(1, 9), flag=wx.ALIGN_CENTER)
        grid.Add(textDwell, pos=(0, 10), flag=wx.ALIGN_CENTER)
        grid.Add(self.choiceDwell, pos=(1, 10), flag=wx.ALIGN_CENTER)
        grid.Add(textNfft, pos=(0, 11), flag=wx.ALIGN_CENTER)
        grid.Add(self.choiceNfft, pos=(1, 11), flag=wx.ALIGN_CENTER)
        grid.Add((20, 1), pos=(0, 12))
        grid.Add(textDisplay, pos=(0, 13), flag=wx.ALIGN_CENTER)
        grid.Add(self.choiceDisplay, pos=(1, 13), flag=wx.ALIGN_CENTER)

        self.__set_controls()
        self.__set_gain_control()

        self.toolbar.SetSizer(grid)
        self.toolbar.Layout()

        sizer = wx.BoxSizer(wx.VERTICAL)
        sizer.Add(self.graph, 1, wx.EXPAND)
        sizer.Add(self.toolbar, 0, wx.EXPAND)
        panel.SetSizer(sizer)
        panel.Layout()

    def __create_menu(self):
        menuFile = wx.Menu()
        self.menuNew = menuFile.Append(wx.ID_NEW, "&New",
                                        "New plot")
        self.menuOpen = menuFile.Append(wx.ID_OPEN, "&Open...",
                                        "Open plot")
        recent = wx.Menu()
        self.settings.fileHistory.UseMenu(recent)
        self.settings.fileHistory.AddFilesToMenu()
        menuFile.AppendMenu(wx.ID_ANY, "&Recent Files", recent)
        menuFile.AppendSeparator()
        self.menuSave = menuFile.Append(wx.ID_SAVE, "&Save As...",
                                        "Save plot")
        self.menuExportScan = menuFile.Append(wx.ID_ANY, "Export scan...",
                                              "Export scan")
        self.menuExportImage = menuFile.Append(wx.ID_ANY, "Export image...",
                                              "Export image")
        self.menuExportGeo = menuFile.Append(wx.ID_ANY, "Export map...",
                                              "Export maps")
        menuFile.AppendSeparator()
        self.menuPage = menuFile.Append(wx.ID_ANY, "Page setup...",
                                        "Page setup")
        self.menuPreview = menuFile.Append(wx.ID_ANY, "Print preview...",
                                        "Print preview")
        self.menuPrint = menuFile.Append(wx.ID_ANY, "&Print...",
                                        "Print plot")
        menuFile.AppendSeparator()
        self.menuProperties = menuFile.Append(wx.ID_ANY, "P&roperties...",
                                              "Show properties")
        menuFile.AppendSeparator()
        menuExit = menuFile.Append(wx.ID_EXIT, "E&xit", "Exit the program")

        menuEdit = wx.Menu()
        self.menuPref = menuEdit.Append(wx.ID_ANY, "&Preferences...",
                                        "Preferences")
        self.menuAdvPref = menuEdit.Append(wx.ID_ANY, "&Advanced preferences...",
                                           "Advanced preferences")
        self.menuDevicesRtl = menuEdit.Append(wx.ID_ANY, "&Radio Devices...",
                                              "Device selection and configuration")
        self.menuDevicesGps = menuEdit.Append(wx.ID_ANY, "&GPS Devices...",
                                              "GPS selection and configuration")
        menuEdit.AppendSeparator()
        self.menuReset = menuEdit.Append(wx.ID_ANY, "&Reset settings...",
                                         "Reset setting to the default")

        menuView = wx.Menu()
        self.menuClearSelect = menuView.Append(wx.ID_ANY, "Clear selection",
                                               "Clear current selection")
        self.graph.add_menu_clear_select(self.menuClearSelect)
        self.menuShowMeasure = menuView.Append(wx.ID_ANY, "Show &measurements",
                                               "Show measurements window",
                                               kind=wx.ITEM_CHECK)
        self.menuShowMeasure.Check(self.settings.showMeasure)

        menuScan = wx.Menu()
        self.menuStart = menuScan.Append(wx.ID_ANY, "&Start", "Start scan")
        self.menuStop = menuScan.Append(wx.ID_ANY, "S&top",
                                        "Stop scan immediately")
        self.menuStopEnd = menuScan.Append(wx.ID_ANY, "Stop at &end",
                                           "Complete current sweep "
                                           "before stopping")

        menuTools = wx.Menu()
        self.menuCompare = menuTools.Append(wx.ID_ANY, "&Compare...",
                                            "Compare plots")
        self.menuCal = menuTools.Append(wx.ID_ANY, "&Auto Calibration...",
                                        "Automatically calibrate to a known frequency")

        menuHelp = wx.Menu()
        menuHelpLink = menuHelp.Append(wx.ID_HELP, "&Help...",
                                       "Link to help")
        menuHelp.AppendSeparator()
        menuUpdate = menuHelp.Append(wx.ID_ANY, "&Check for updates...",
                                     "Check for updates to the program")
        menuHelp.AppendSeparator()
        menuAbout = menuHelp.Append(wx.ID_ABOUT, "&About...",
                                    "Information about this program")

        menuBar = wx.MenuBar()
        menuBar.Append(menuFile, "&File")
        menuBar.Append(menuEdit, "&Edit")
        menuBar.Append(menuView, "&View")
        menuBar.Append(menuScan, "&Scan")
        menuBar.Append(menuTools, "&Tools")
        menuBar.Append(menuHelp, "&Help")
        self.SetMenuBar(menuBar)

        self.Bind(wx.EVT_MENU, self.__on_new, self.menuNew)
        self.Bind(wx.EVT_MENU, self.__on_open, self.menuOpen)
        self.Bind(wx.EVT_MENU_RANGE, self.__on_file_history, id=wx.ID_FILE1,
                  id2=wx.ID_FILE9)
        self.Bind(wx.EVT_MENU, self.__on_save, self.menuSave)
        self.Bind(wx.EVT_MENU, self.__on_export_scan, self.menuExportScan)
        self.Bind(wx.EVT_MENU, self.__on_export_image, self.menuExportImage)
        self.Bind(wx.EVT_MENU, self.__on_export_geo, self.menuExportGeo)
        self.Bind(wx.EVT_MENU, self.__on_page, self.menuPage)
        self.Bind(wx.EVT_MENU, self.__on_preview, self.menuPreview)
        self.Bind(wx.EVT_MENU, self.__on_print, self.menuPrint)
        self.Bind(wx.EVT_MENU, self.__on_properties, self.menuProperties)
        self.Bind(wx.EVT_MENU, self.__on_exit, menuExit)
        self.Bind(wx.EVT_MENU, self.__on_pref, self.menuPref)
        self.Bind(wx.EVT_MENU, self.__on_adv_pref, self.menuAdvPref)
        self.Bind(wx.EVT_MENU, self.__on_devices_rtl, self.menuDevicesRtl)
        self.Bind(wx.EVT_MENU, self.__on_devices_gps, self.menuDevicesGps)
        self.Bind(wx.EVT_MENU, self.__on_reset, self.menuReset)
        self.Bind(wx.EVT_MENU, self.__on_clear_select, self.menuClearSelect)
        self.Bind(wx.EVT_MENU, self.__on_show_measure, self.menuShowMeasure)
        self.Bind(wx.EVT_MENU, self.__on_start, self.menuStart)
        self.Bind(wx.EVT_MENU, self.__on_stop, self.menuStop)
        self.Bind(wx.EVT_MENU, self.__on_stop_end, self.menuStopEnd)
        self.Bind(wx.EVT_MENU, self.__on_compare, self.menuCompare)
        self.Bind(wx.EVT_MENU, self.__on_cal, self.menuCal)
        self.Bind(wx.EVT_MENU, self.__on_about, menuAbout)
        self.Bind(wx.EVT_MENU, self.__on_help, menuHelpLink)
        self.Bind(wx.EVT_MENU, self.__on_update, menuUpdate)

        idF1 = wx.wx.NewId()
        self.Bind(wx.EVT_MENU, self.__on_help, id=idF1)
        accelTable = wx.AcceleratorTable([(wx.ACCEL_NORMAL, wx.WXK_F1, idF1)])
        self.SetAcceleratorTable(accelTable)

    def __create_popup_menu(self):
        self.popupMenu = wx.Menu()
        self.popupMenuStart = self.popupMenu.Append(wx.ID_ANY, "&Start",
                                                    "Start scan")
        self.popupMenuStop = self.popupMenu.Append(wx.ID_ANY, "S&top",
                                                   "Stop scan immediately")
        self.popupMenuStopEnd = self.popupMenu.Append(wx.ID_ANY, "Stop at &end",
                                                      "Complete current sweep "
                                                      "before stopping")
        self.popupMenu.AppendSeparator()
        self.popupMenuRangeLim = self.popupMenu.Append(wx.ID_ANY,
                                                       "Set range to current zoom",
                                                       "Set scanning range to the "
                                                       "current zoom")
        self.popupMenu.AppendSeparator()
        self.popupMenuPointsLim = self.popupMenu.Append(wx.ID_ANY,
                                                       "Limit points",
                                                       "Limit points to "
                                                       "increase plot speed",
                                                       kind=wx.ITEM_CHECK)
        self.popupMenuPointsLim.Check(self.settings.pointsLimit)

        self.popupMenu.AppendSeparator()
        self.popupMenuClearSelect = self.popupMenu.Append(wx.ID_ANY, "Clear selection",
                                                          "Clear current selection")
        self.graph.add_menu_clear_select(self.popupMenuClearSelect)
        self.popupMenuShowMeasure = self.popupMenu.Append(wx.ID_ANY,
                                                          "Show &measurements",
                                                          "Show measurements window",
                                                          kind=wx.ITEM_CHECK)
        self.popupMenuShowMeasure.Check(self.settings.showMeasure)

        self.Bind(wx.EVT_MENU, self.__on_start, self.popupMenuStart)
        self.Bind(wx.EVT_MENU, self.__on_stop, self.popupMenuStop)
        self.Bind(wx.EVT_MENU, self.__on_stop_end, self.popupMenuStopEnd)
        self.Bind(wx.EVT_MENU, self.__on_range_lim, self.popupMenuRangeLim)
        self.Bind(wx.EVT_MENU, self.__on_points_lim, self.popupMenuPointsLim)
        self.Bind(wx.EVT_MENU, self.__on_clear_select, self.popupMenuClearSelect)
        self.Bind(wx.EVT_MENU, self.__on_show_measure, self.popupMenuShowMeasure)

        self.Bind(wx.EVT_CONTEXT_MENU, self.__on_popup_menu)

    def __on_popup_menu(self, event):
        pos = event.GetPosition()
        pos = self.ScreenToClient(pos)
        self.PopupMenu(self.popupMenu, pos)

    def __on_new(self, _event):
        if self.__save_warn(Warn.NEW):
            return
        self.spectrum.clear()
        self.location.clear()
        self.__saved(True)
        self.__set_plot(self.spectrum, False)

    def __on_open(self, _event):
        if self.__save_warn(Warn.OPEN):
            return
        dlg = wx.FileDialog(self, "Open a scan", self.settings.dirScans,
                            self.filename,
                            File.get_type_filters(File.Types.SAVE),
                            wx.OPEN)
        if dlg.ShowModal() == wx.ID_OK:
            self.open(dlg.GetDirectory(), dlg.GetFilename())
        dlg.Destroy()

    def __on_file_history(self, event):
        selection = event.GetId() - wx.ID_FILE1
        path = self.settings.fileHistory.GetHistoryFile(selection)
        self.settings.fileHistory.AddFileToHistory(path)
        dirname, filename = os.path.split(path)
        self.open(dirname, filename)

    def __on_save(self, _event):
        dlg = wx.FileDialog(self, "Save a scan", self.settings.dirScans,
                            self.filename,
                            File.get_type_filters(File.Types.SAVE),
                            wx.SAVE | wx.OVERWRITE_PROMPT)
        if dlg.ShowModal() == wx.ID_OK:
            self.status.set_general("Saving")
            fileName = dlg.GetFilename()
            dirName = dlg.GetDirectory()
            self.filename = os.path.splitext(fileName)[0]
            self.settings.dirScans = dirName
            fileName = extension_add(fileName, dlg.GetFilterIndex(),
                                     File.Types.SAVE)
            fullName = os.path.join(dirName, fileName)
            save_plot(fullName, self.scanInfo, self.spectrum, self.location)
            self.__saved(True)
            self.status.set_general("Finished")
            self.settings.fileHistory.AddFileToHistory(fullName)
        dlg.Destroy()

    def __on_export_scan(self, _event):
        dlg = wx.FileDialog(self, "Export a scan", self.settings.dirExport,
                            self.filename, File.get_type_filters(),
                            wx.SAVE | wx.OVERWRITE_PROMPT)
        if dlg.ShowModal() == wx.ID_OK:
            self.status.set_general("Exporting")
            fileName = dlg.GetFilename()
            dirName = dlg.GetDirectory()
            self.settings.dirExport = dirName
            fileName = extension_add(fileName, dlg.GetFilterIndex(),
                                     File.Types.PLOT)
            fullName = os.path.join(dirName, fileName)
            export_plot(fullName, dlg.GetFilterIndex(), self.spectrum)
            self.status.set_general("Finished")
        dlg.Destroy()

    def __on_export_image(self, _event):
        dlg = wx.FileDialog(self, "Export image to file",
                            self.settings.dirExport,
                            self.filename,
                            File.get_type_filters(File.Types.IMAGE),
                            wx.SAVE | wx.OVERWRITE_PROMPT)
        dlg.SetFilterIndex(File.ImageType.PNG)
        if dlg.ShowModal() == wx.ID_OK:
            self.status.set_general("Exporting")
            fileName = dlg.GetFilename()
            dirName = dlg.GetDirectory()
            self.settings.dirExport = dirName
            fileName = extension_add(fileName, dlg.GetFilterIndex(),
                                     File.Types.IMAGE)
            fullName = os.path.join(dirName, fileName)
            exportType = dlg.GetFilterIndex()
            export_image(fullName, exportType,
                         self.graph.get_figure(), self.settings.exportDpi)
            self.status.set_general("Finished")
        dlg.Destroy()

    def __on_export_geo(self, _event):
        dlgGeo = DialogGeo(self, self.spectrum, self.location, self.settings)
        if dlgGeo.ShowModal() == wx.ID_OK:
            self.status.set_general("Exporting...")
            extent = dlgGeo.get_extent()
            dlgFile = wx.FileDialog(self, "Export map to file",
                                self.settings.dirExport,
                                self.filename,
                                File.get_type_filters(File.Types.GEO),
                                wx.SAVE | wx.OVERWRITE_PROMPT)
            dlgFile.SetFilterIndex(File.GeoType.KMZ)
            if dlgFile.ShowModal() == wx.ID_OK:
                fileName = dlgFile.GetFilename()
                dirName = dlgFile.GetDirectory()
                self.settings.dirExport = dirName
                fileName = extension_add(fileName, dlgFile.GetFilterIndex(),
                                         File.Types.GEO)
                fullName = os.path.join(dirName, fileName)
                exportType = dlgFile.GetFilterIndex()
                image = None
                xyz = None
                if exportType == File.GeoType.CSV:
                    xyz = dlgGeo.get_xyz()
                else:
                    image = dlgGeo.get_image()
                export_map(fullName, exportType, extent, image, xyz)
            self.status.set_general("Finished")
            dlgFile.Destroy()
        dlgGeo.Destroy()

    def __on_page(self, _event):
        dlg = wx.PageSetupDialog(self, self.pageConfig)
        if dlg.ShowModal() == wx.ID_OK:
            self.pageConfig = wx.PageSetupDialogData(dlg.GetPageSetupDialogData())
            self.printConfig.SetPrintData(self.pageConfig.GetPrintData())
        dlg.Destroy()

    def __on_preview(self, _event):
        printout = PrintOut(self.graph, self.filename, self.pageConfig)
        printoutPrinting = PrintOut(self.graph, self.filename, self.pageConfig)
        preview = wx.PrintPreview(printout, printoutPrinting, self.printConfig)
        frame = wx.PreviewFrame(preview, self, 'Print Preview')
        frame.Initialize()
        frame.SetSize(self.GetSize())
        frame.Show(True)

    def __on_print(self, _event):
        printer = wx.Printer(self.printConfig)
        printout = PrintOut(self.graph, self.filename, self.pageConfig)
        if printer.Print(self, printout, True):
            self.printConfig = wx.PrintDialogData(printer.GetPrintDialogData())
            self.pageConfig.SetPrintData(self.printConfig.GetPrintData())

    def __on_properties(self, _event):
        if len(self.spectrum) > 0:
            self.scanInfo.timeFirst = min(self.spectrum)
            self.scanInfo.timeLast = max(self.spectrum)

        dlg = DialogProperties(self, self.scanInfo)
        dlg.ShowModal()
        dlg.Destroy()

    def __on_exit(self, _event):
        self.Unbind(wx.EVT_CLOSE)
        if self.__save_warn(Warn.EXIT):
            self.Bind(wx.EVT_CLOSE, self.__on_exit)
            return
        self.__scan_stop()
        self.__wait_background()
        self.__get_controls()
        self.graph.close()
        self.settings.dwell = DWELL[1::2][self.choiceDwell.GetSelection()]
        self.settings.nfft = NFFT[self.choiceNfft.GetSelection()]
        self.settings.devicesRtl = self.devicesRtl
        self.settings.save()
        self.Close(True)

    def __on_pref(self, _event):
        self.__get_controls()
        dlg = DialogPrefs(self, self.settings)
        if dlg.ShowModal() == wx.ID_OK:
            self.graph.create_plot()
            self.__set_control_state(True)
            self.__set_controls()
        dlg.Destroy()

    def __on_adv_pref(self, _event):
        dlg = DialogAdvPrefs(self, self.settings)
        if dlg.ShowModal() == wx.ID_OK:
            self.__set_control_state(True)
        dlg.Destroy()

    def __on_devices_rtl(self, _event):
        self.__get_controls()
        self.devicesRtl = self.__refresh_devices()
        dlg = DialogDevicesRTL(self, self.devicesRtl, self.settings)
        if dlg.ShowModal() == wx.ID_OK:
            self.devicesRtl = dlg.get_devices()
            self.settings.indexRtl = dlg.get_index()
            self.__set_gain_control()
            self.__set_control_state(True)
            self.__set_controls()
        dlg.Destroy()

    def __on_devices_gps(self, _event):
        dlg = DialogDevicesGPS(self, self.settings)
        dlg.ShowModal()
        dlg.Destroy()

    def __on_reset(self, _event):
        dlg = wx.MessageDialog(self,
                               'Reset all settings to the default values\n'
                               '(cannot be undone)?',
                               'Reset Settings',
                               wx.YES_NO | wx.ICON_QUESTION)
        if dlg.ShowModal() == wx.ID_YES:
            self.settings.reset()
            self.__set_controls()
            self.graph.create_plot()
        dlg.Destroy()

    def __on_compare(self, _event):
        dlg = DialogCompare(self, self.settings.dirScans, self.filename)
        dlg.ShowModal()
        dlg.Destroy()

    def __on_clear_select(self, _event):
        self.graph.clear_selection()

    def __on_show_measure(self, event):
        show = event.Checked()
        self.menuShowMeasure.Check(show)
        self.popupMenuShowMeasure.Check(show)
        self.settings.showMeasure = show
        self.graph.show_measure_table(show)
        self.Layout()

    def __on_cal(self, _event):
        self.dlgCal = DialogAutoCal(self, self.settings.calFreq, self.__auto_cal)
        self.dlgCal.ShowModal()

    def __on_about(self, _event):
        dlg = DialogAbout(self)
        dlg.ShowModal()
        dlg.Destroy()

    def __on_help(self, _event):
        webbrowser.open("http://eartoearoak.com/software/rtlsdr-scanner")

    def __on_update(self, _event):
        if self.threadUpdate is None:
            self.status.set_general("Checking for updates")
            self.threadUpdate = Thread(target=self.__update_check)
            self.threadUpdate.start()

    def __on_spin(self, event):
        control = event.GetEventObject()
        if control == self.spinCtrlStart:
            self.spinCtrlStop.SetRange(self.spinCtrlStart.GetValue() + 1,
                                          F_MAX)

    def __on_choice(self, _event):
        self.__get_controls()
        self.graph.create_plot()

    def __on_start(self, _event):
        if self.settings.start >= self.settings.stop:
            wx.MessageBox('Stop frequency must be greater that start',
                          'Warning', wx.OK | wx.ICON_WARNING)
            return

        self.__get_controls()
        self.graph.clear_plots()

        self.devicesRtl = self.__refresh_devices()
        if len(self.devicesRtl) == 0:
            wx.MessageBox('No devices found',
                          'Error', wx.OK | wx.ICON_ERROR)
        else:
            self.spectrum.clear()
            self.location.clear()
            self.__scan_start()

    def __on_stop(self, _event):
        self.stopScan = True
        self.stopAtEnd = False
        self.__scan_stop()

    def __on_stop_end(self, _event):
        self.stopAtEnd = True

    def __on_range_lim(self, _event):
        xmin, xmax = self.graph.get_axes().get_xlim()
        xmin = int(xmin)
        xmax = math.ceil(xmax)
        if xmax < xmin + 1:
            xmax = xmin + 1
        self.settings.start = xmin
        self.settings.stop = xmax
        self.__set_controls()

    def __on_points_lim(self, _event):
        self.settings.pointsLimit = self.popupMenuPointsLim.IsChecked()
        self.__set_plot(self.spectrum, self.settings.annotate)

    def __on_motion(self, event):
        xpos = event.xdata
        ypos = event.ydata
        text = ""
        if xpos is None or ypos is  None or  len(self.spectrum) == 0:
            return

        if self.settings.display == Display.PLOT:
            timeStamp = max(self.spectrum)
            spectrum = self.spectrum[timeStamp]
        elif self.settings.display == Display.SPECT:
            timeStamp = num2epoch(ypos)
            if timeStamp in self.spectrum:
                spectrum = self.spectrum[timeStamp]
            else:
                nearest = min(self.spectrum.keys(),
                              key=lambda k: abs(k - timeStamp))
                spectrum = self.spectrum[nearest]
        else:
            spectrum = None

        if spectrum is not None and len(spectrum) > 0:
            x = min(spectrum.keys(), key=lambda freq: abs(freq - xpos))
            if xpos <= max(spectrum.keys(), key=float):
                y = spectrum[x]
                text = "f = {0:.6f}MHz, p = {1:.2f}dB/Hz".format(x, y)
            else:
                text = "f = {0:.6f}MHz".format(xpos)

        self.status.SetStatusText(text, 1)

    def __on_event(self, event):
        status = event.data.get_status()
        freq = event.data.get_arg1()
        data = event.data.get_arg2()
        if status == Event.STARTING:
            self.status.set_general("Starting")
        elif status == Event.STEPS:
            self.stepsTotal = (freq + 1) * 2
            self.steps = self.stepsTotal
            self.status.set_progress(0)
            self.status.show_progress()
        elif status == Event.CAL:
            self.__auto_cal(Cal.DONE)
        elif status == Event.INFO:
            if self.threadScan is not None:
                self.sdr = self.threadScan.get_sdr()
                if data is not None:
                    self.devicesRtl[self.settings.indexRtl].tuner = data
                    self.scanInfo.tuner = data
        elif status == Event.DATA:
            self.__saved(False)
            cal = self.devicesRtl[self.settings.indexRtl].calibration
            self.pool.apply_async(anaylse_data,
                                  (freq, data, cal,
                                   self.settings.nfft,
                                   self.settings.overlap,
                                   self.settings.winFunc),
                                  callback=self.__on_process_done)
            self.__progress()
        elif status == Event.STOPPED:
            self.__cleanup()
            self.status.set_general("Stopped")
        elif status == Event.FINISHED:
            self.threadScan = None
        elif status == Event.ERROR:
            self.__cleanup()
            self.status.set_general("Error: {0}".format(data))
            if self.dlgCal is not None:
                self.dlgCal.Destroy()
                self.dlgCal = None
        elif status == Event.PROCESSED:
            offset = self.settings.devicesRtl[self.settings.indexRtl].offset
            if self.settings.alert:
                alert = self.settings.alertLevel
            else:
                alert = None
            Thread(target=update_spectrum, name='Update',
                   args=(self, self.lock, self.settings.start,
                         self.settings.stop, freq,
                         data, offset, self.spectrum,
                         not self.settings.retainScans,
                         alert)).start()
        elif status == Event.LEVEL:
            wx.Bell()
        elif status == Event.UPDATED:
            if data and self.settings.liveUpdate:
                self.__set_plot(self.spectrum,
                                self.settings.annotate and \
                                self.settings.retainScans and \
                                self.settings.mode == Mode.CONTIN)
            self.__progress()
        elif status == Event.DRAW:
            self.graph.draw()
        elif status == Event.VER_UPD:
            self.__update_checked(True, freq, data)
        elif status == Event.VER_NOUPD:
            self.__update_checked(False)
        elif status == Event.VER_UPDFAIL:
            self.__update_checked(failed=True)
        elif status == Event.LOC_WARN:
            self.status.set_info("GPS: {0}".format(data))
        elif status == Event.LOC:
            if self.scanInfo is not None:
                if data[0] and data[1]:
                    self.scanInfo.lat = str(data[0])
                    self.scanInfo.lon = str(data[1])
                    if len(self.spectrum) > 0:
                        self.location[max(self.spectrum)] = (data[0],
                                                             data[1],
                                                             data[2])

        wx.YieldIfNeeded()

    def __on_process_done(self, data):
        timeStamp, freq, scan = data
        post_event(self, EventThread(Event.PROCESSED, freq,
                                             (timeStamp, scan)))

    def __auto_cal(self, status):
        freq = self.dlgCal.get_arg1()
        if self.dlgCal is not None:
            if status == Cal.START:
                self.spinCtrlStart.SetValue(int(freq))
                self.spinCtrlStop.SetValue(math.ceil(freq))
                self.oldCal = self.devicesRtl[self.settings.indexRtl].calibration
                self.devicesRtl[self.settings.indexRtl].calibration = 0
                self.__get_controls()
                self.spectrum.clear()
                self.location.clear()
                if not self.__scan_start(isCal=True):
                    self.dlgCal.reset_cal()
            elif status == Cal.DONE:
                ppm = self.__calc_ppm(freq)
                self.dlgCal.set_cal(ppm)
                self.__set_control_state(True)
            elif status == Cal.OK:
                self.devicesRtl[self.settings.indexRtl].calibration = self.dlgCal.get_cal()
                self.settings.calFreq = freq
                self.dlgCal = None
            elif status == Cal.CANCEL:
                self.dlgCal = None
                if len(self.devicesRtl) > 0:
                    self.devicesRtl[self.settings.indexRtl].calibration = self.oldCal

    def __calc_ppm(self, freq):
        with self.lock:
            timeStamp = max(self.spectrum)
            spectrum = self.spectrum[timeStamp].copy()

            for x, y in spectrum.iteritems():
                spectrum[x] = (((x - freq) * (x - freq)) + 1) * y
                peak = max(spectrum, key=spectrum.get)

        return ((freq - peak) / freq) * 1e6

    def __scan_start(self, isCal=False):
        if self.settings.mode == Mode.SINGLE:
            if self.__save_warn(Warn.SCAN):
                return False

        if not self.threadScan:
            self.__set_control_state(False)
            samples = calc_samples(self.settings.dwell)
            self.status.set_info('')
            self.scanInfo.setFromSettings(self.settings)
            time = datetime.datetime.utcnow().replace(microsecond=0)
            self.scanInfo.time = time.isoformat() + "Z"
            self.scanInfo.lat = None
            self.scanInfo.lon = None
            self.scanInfo.desc = ''
            self.stopAtEnd = False
            self.stopScan = False
            self.threadScan = ThreadScan(self, self.sdr, self.settings,
                                         self.settings.indexRtl, samples, isCal)
            self.filename = "Scan {0:.1f}-{1:.1f}MHz".format(self.settings.start,
                                                            self.settings.stop)
            self.graph.set_plot_title()

            if self.settings.gps:
                if self.threadLocation and self.threadLocation.isAlive():
                    self.threadLocation.stop()
                    self.threadLocation.join()
                device = self.settings.devicesGps[self.settings.indexGps]
                self.threadLocation = ThreadLocation(self, device)

            return True

    def __scan_stop(self):
        if self.threadScan:
            self.status.set_general("Stopping")
            self.threadScan.abort()
            self.threadScan.join()
        self.threadScan = None
        if self.threadLocation and self.threadLocation.isAlive():
            self.threadLocation.stop()
            self.threadLocation.join()
        self.threadLocation = None
        if self.sdr is not None:
            self.sdr.close()
        self.__set_control_state(True)

    def __progress(self):
        self.steps -= 1
        if self.steps > 0 and not self.stopScan:
            self.status.set_progress((self.stepsTotal - self.steps) * 100
                    / self.stepsTotal)
            self.status.show_progress()
            self.status.set_general("Scanning")
        else:
            self.status.hide_progress()
            self.__set_plot(self.spectrum, self.settings.annotate)
            if self.stopScan:
                self.status.set_general("Stopped")
                self.__cleanup()
            elif self.settings.mode == Mode.SINGLE:
                self.status.set_general("Finished")
                self.__cleanup()
            else:
                if self.settings.mode == Mode.CONTIN:
                    if self.dlgCal is None and not self.stopAtEnd:
                        self.__limit_spectrum()
                        self.__scan_start()
                    else:
                        self.status.set_general("Stopped")
                        self.__cleanup()

    def __cleanup(self):
        if self.sdr is not None:
            self.sdr.close()
            self.sdr = None
        if self.threadLocation and self.threadLocation.isAlive():
            self.threadLocation.stop()
            self.threadLocation.join()
        self.threadLocation = None

        self.status.hide_progress()
        self.steps = 0
        self.threadScan = None
        self.__set_control_state(True)
        self.stopAtEnd = False
        self.stopScan = True

    def __remove_last(self, data):
        while len(data) >= self.settings.retainMax:
            timeStamp = min(data)
            del data[timeStamp]

    def __limit_spectrum(self):
        with self.lock:
            self.__remove_last(self.spectrum)
            self.__remove_last(self.location)

    def __saved(self, isSaved):
        self.isSaved = isSaved
        title = "RTLSDR Scanner - " + self.filename
        if not isSaved:
            title += "*"
        self.SetTitle(title)

    def __set_plot(self, spectrum, annotate):
        if len(spectrum) > 0:
            total = count_points(spectrum)
            if total > 0:
                spectrum = sort_spectrum(spectrum)
                extent = Extent(spectrum)
                self.graph.set_plot(spectrum,
                                    self.settings.pointsLimit,
                                    self.settings.pointsMax,
                                    extent, annotate)
        else:
            self.graph.clear_plots()

    def __set_control_state(self, state):
        hasDevices = len(self.devicesRtl) > 0
        self.spinCtrlStart.Enable(state)
        self.spinCtrlStop.Enable(state)
        self.controlGain.Enable(state)
        self.choiceMode.Enable(state)
        self.choiceDwell.Enable(state)
        self.choiceNfft.Enable(state)
        self.buttonStart.Enable(state and hasDevices)
        self.buttonStop.Enable(not state and hasDevices)
        self.menuNew.Enable(state)
        self.menuOpen.Enable(state)
        self.menuSave.Enable(state and len(self.spectrum) > 0)
        self.menuExportScan.Enable(state and len(self.spectrum) > 0)
        self.menuExportImage.Enable(state)
        self.menuExportGeo.Enable(state and len(self.spectrum) > 0 \
                                  and len(self.location) > 0)
        self.menuPage.Enable(state)
        self.menuPreview.Enable(state)
        self.menuPrint.Enable(state)
        self.menuStart.Enable(state)
        self.menuStop.Enable(not state)
        self.menuPref.Enable(state)
        self.menuAdvPref.Enable(state)
        self.menuDevicesRtl.Enable(state)
        self.menuDevicesGps.Enable(state)
        self.menuReset.Enable(state)
        self.menuCal.Enable(state)
        self.popupMenuStop.Enable(not state)
        self.popupMenuStart.Enable(state)
        if self.settings.mode == Mode.CONTIN:
            self.menuStopEnd.Enable(not state)
            self.popupMenuStopEnd.Enable(not state)
        else:
            self.menuStopEnd.Enable(False)
            self.popupMenuStopEnd.Enable(False)
        self.popupMenuRangeLim.Enable(state)

    def __set_controls(self):
        self.spinCtrlStart.SetValue(self.settings.start)
        self.spinCtrlStop.SetValue(self.settings.stop)
        self.choiceMode.SetSelection(MODE[1::2].index(self.settings.mode))
        dwell = calc_real_dwell(self.settings.dwell)
        self.choiceDwell.SetSelection(DWELL[1::2].index(dwell))
        self.choiceNfft.SetSelection(NFFT.index(self.settings.nfft))
        self.choiceDisplay.SetSelection(DISPLAY[1::2].index(self.settings.display))

    def __set_gain_control(self):
        grid = self.controlGain.GetContainingSizer()
        if len(self.devicesRtl) > 0:
            self.controlGain.Destroy()
            device = self.devicesRtl[self.settings.indexRtl]
            if device.isDevice:
                gains = device.get_gains_str()
                self.controlGain = wx.Choice(self.toolbar,
                                             choices=gains)
                gain = device.get_closest_gain_str(device.gain)
                self.controlGain.SetStringSelection(gain)
            else:
                self.controlGain = NumCtrl(self.toolbar, integerWidth=3,
                                           fractionWidth=1)
                font = self.controlGain.GetFont()
                dc = wx.WindowDC(self.controlGain)
                dc.SetFont(font)
                size = dc.GetTextExtent('####.#')
                self.controlGain.SetMinSize((size[0] * 1.2, -1))
                self.controlGain.SetValue(device.gain)

            grid.Add(self.controlGain, pos=(1, 7), flag=wx.ALIGN_CENTER)
            grid.Layout()

    def __get_controls(self):
        self.settings.start = self.spinCtrlStart.GetValue()
        self.settings.stop = self.spinCtrlStop.GetValue()
        self.settings.mode = MODE[1::2][self.choiceMode.GetSelection()]
        self.settings.dwell = DWELL[1::2][self.choiceDwell.GetSelection()]
        self.settings.nfft = NFFT[self.choiceNfft.GetSelection()]
        self.settings.display = DISPLAY[1::2][self.choiceDisplay.GetSelection()]

        if len(self.devicesRtl) > 0:
            device = self.devicesRtl[self.settings.indexRtl]
            try:
                if device.isDevice:
                    device.gain = float(self.controlGain.GetStringSelection())
                else:
                    device.gain = self.controlGain.GetValue()
            except ValueError:
                device.gain = 0

    def __save_warn(self, warnType):
        if self.settings.saveWarn and not self.isSaved:
            dlg = DialogSaveWarn(self, warnType)
            code = dlg.ShowModal()
            if code == wx.ID_YES:
                self.__on_save(None)
                if self.isSaved:
                    return False
                else:
                    return True
            elif code == wx.ID_NO:
                return False
            else:
                return True

        return False

    def __update_check(self):
        local = get_version_timestamp(True)
        try:
            remote = get_version_timestamp_repo()
        except IOError:
            post_event(self, EventThread(Event.VER_UPDFAIL))
            return

        if remote > local:
            post_event(self, EventThread(Event.VER_UPD, local, remote))
        else:
            post_event(self, EventThread(Event.VER_NOUPD))

    def __update_checked(self, updateFound=False, local=None, remote=None,
                       failed=False):
        self.threadUpdate = None
        self.status.set_general("")
        if failed:
            icon = wx.ICON_ERROR
            message = "Update check failed"
        else:
            icon = wx.ICON_INFORMATION
            if updateFound:
                message = "Update found\n\n"
                message += "Local: " + time.strftime('%c',
                                                     time.localtime(local))
                message += "\nRemote: " + time.strftime('%c',
                                                        time.localtime(remote))
            else:
                message = "No updates found"

        dlg = wx.MessageDialog(self, message, "Update",
                               wx.OK | icon)
        dlg.ShowModal()
        dlg.Destroy()

    def __refresh_devices(self):
        self.settings.devicesRtl = get_devices_rtl(self.devicesRtl, self.status)
        if self.settings.indexRtl > len(self.devicesRtl) - 1:
            self.settings.indexRtl = 0
        self.settings.save()
        return self.settings.devicesRtl

    def __wait_background(self):
        self.Disconnect(-1, -1, EVENT_THREAD, self.__on_event)
        if self.threadScan:
            self.threadScan.abort()
            self.threadScan.join()
            self.threadScan = None
        self.pool.close()
        self.pool.join()

    def open(self, dirname, filename):
        if not os.path.exists(os.path.join(dirname, filename)):
            wx.MessageBox('File not found',
                          'Error', wx.OK | wx.ICON_ERROR)
            return

        self.filename = os.path.splitext(filename)[0]
        self.settings.dirScans = dirname
        self.status.set_general("Opening: {0}".format(filename))

        self.scanInfo, spectrum, location = open_plot(dirname, filename)

        if len(spectrum) > 0:
            self.scanInfo.setToSettings(self.settings)
            self.spectrum = spectrum
            self.location = location
            self.__saved(True)
            self.__set_controls()
            self.__set_control_state(True)
            self.__set_plot(spectrum, self.settings.annotate)
            self.graph.scale_plot(True)
            self.status.set_general("Finished")
            self.settings.fileHistory.AddFileToHistory(os.path.join(dirname,
                                                                    filename))
        else:
            self.status.set_general("Open failed")
Ejemplo n.º 2
0
 def __on_cal(self, _event):
     self.dlgCal = DialogAutoCal(self, self.settings.calFreq, self.__auto_cal)
     self.dlgCal.ShowModal()