class ExportTest(unittest.TestCase):
"""
Test various export configurations
"""
def setUp(self):
optparser = BaseOptions()
optparser.parseOptions(['dummyfile.xml', '--debug=%s' % logging._levelNames[log.level].lower()])
self.defaults = RawConfigParser()
configfiles = self.defaults.read(TESTCONF)
xmldata = """
<project name="testproj" code="01">
<site name="sitea" type="primary" location="testlab">
<host name="sitea_host01" operatingsystem="linux" />
<host name="sitea_host02" operatingsystem="windows" />
<host name="sitea_host03" operatingsystem="solaris" />
<vlan type="project" number="3001">
<network number="10.20.30.1/26" gateway="10.20.30.254"/>
</vlan>
<filer name="filer1" type="filer">
<vfiler name="vftest01" rootaggr="aggr0">
<ipaddress type="primary" ip="10.20.30.1"/>
<aggregate name="aggr01"/>
</vfiler>
</filer>
</site>
</project>
"""
node = etree.fromstring(xmldata)
self.project = Project()
self.project.configure_from_node(node, self.defaults, None)
self.sitea = self.project.get_sites()[0]
self.filer1 = self.sitea.get_filers()[0]
self.vfiler1 = self.filer1.get_vfilers()[0]
self.aggr1 = self.vfiler1.get_aggregates()[0]
def test_default_exports(self):
"""
Test a single volume and the default exports.
"""
xmldata = """
<volume>
</volume>
"""
node = etree.fromstring(xmldata)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
self.failUnlessEqual(vol.name, "filer1_vftest01_fs_01")
self.project.setup_exports(self.defaults)
# check the exports are set up correctly
for qtree in self.vfiler1.get_qtrees():
exports = qtree.get_exports()
log.debug("exports: %s", [ str(x) for x in exports ])
self.failUnlessEqual( len(exports), 3 )
self.failUnlessEqual( exports[0].fromip, '10.20.30.1' )
def test_default_exports_2(self):
"""
Test a two volumes and the default exports.
"""
xmldata = """
<volume/>
"""
node = etree.fromstring(xmldata)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
self.failUnlessEqual(vol.name, "filer1_vftest01_fs_02")
self.project.setup_exports(self.defaults)
# check the exports are set up correctly
for qtree in self.vfiler1.get_qtrees():
exports = qtree.get_exports()
log.debug("exports: %s", [ str(x) for x in exports ])
self.failUnlessEqual( len(exports), 3 )
self.failUnlessEqual( exports[0].fromip, '10.20.30.1' )
def test_qtree_default(self):
"""
Test a single volume and the default exports.
"""
xmldata = """
<volume>
<qtree name="blahblah"/>
</volume>
"""
node = etree.fromstring(xmldata)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
self.failUnlessEqual(vol.name, "filer1_vftest01_fs_01")
self.project.setup_exports(self.defaults)
# check the exports are set up correctly
for qtree in self.vfiler1.get_qtrees():
exports = qtree.get_exports()
log.debug("exports: %s", [ str(x) for x in exports ])
self.failUnlessEqual( len(exports), 3 )
self.failUnlessEqual( exports[0].fromip, '10.20.30.1' )
class ExportTest(unittest.TestCase):
"""
Test various export configurations
"""
def setUp(self):
optparser = BaseOptions()
optparser.parseOptions([
'dummyfile.xml',
'--debug=%s' % logging._levelNames[log.level].lower()
])
self.defaults = RawConfigParser()
configfiles = self.defaults.read(TESTCONF)
xmldata = """
<project name="testproj" code="01">
<site name="sitea" type="primary" location="testlab">
<host name="sitea_host01" operatingsystem="linux" />
<host name="sitea_host02" operatingsystem="windows" />
<host name="sitea_host03" operatingsystem="solaris" />
<vlan type="project" number="3001">
<network number="10.20.30.1/26" gateway="10.20.30.254"/>
</vlan>
<filer name="filer1" type="filer">
<vfiler name="vftest01" rootaggr="aggr0">
<ipaddress type="primary" ip="10.20.30.1"/>
<aggregate name="aggr01"/>
</vfiler>
</filer>
</site>
</project>
"""
node = etree.fromstring(xmldata)
self.project = Project()
self.project.configure_from_node(node, self.defaults, None)
self.sitea = self.project.get_sites()[0]
self.filer1 = self.sitea.get_filers()[0]
self.vfiler1 = self.filer1.get_vfilers()[0]
self.aggr1 = self.vfiler1.get_aggregates()[0]
def test_default_exports(self):
"""
Test a single volume and the default exports.
"""
xmldata = """
<volume>
</volume>
"""
node = etree.fromstring(xmldata)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
self.failUnlessEqual(vol.name, "filer1_vftest01_fs_01")
self.project.setup_exports(self.defaults)
# check the exports are set up correctly
for qtree in self.vfiler1.get_qtrees():
exports = qtree.get_exports()
log.debug("exports: %s", [str(x) for x in exports])
self.failUnlessEqual(len(exports), 3)
self.failUnlessEqual(exports[0].fromip, '10.20.30.1')
def test_default_exports_2(self):
"""
Test a two volumes and the default exports.
"""
xmldata = """
<volume/>
"""
node = etree.fromstring(xmldata)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
self.failUnlessEqual(vol.name, "filer1_vftest01_fs_02")
self.project.setup_exports(self.defaults)
# check the exports are set up correctly
for qtree in self.vfiler1.get_qtrees():
exports = qtree.get_exports()
log.debug("exports: %s", [str(x) for x in exports])
self.failUnlessEqual(len(exports), 3)
self.failUnlessEqual(exports[0].fromip, '10.20.30.1')
def test_qtree_default(self):
"""
Test a single volume and the default exports.
"""
xmldata = """
<volume>
<qtree name="blahblah"/>
</volume>
"""
node = etree.fromstring(xmldata)
vol = volume.create_volume_from_node(node, self.defaults, self.aggr1)
self.aggr1.add_child(vol)
self.failUnlessEqual(vol.name, "filer1_vftest01_fs_01")
self.project.setup_exports(self.defaults)
# check the exports are set up correctly
for qtree in self.vfiler1.get_qtrees():
exports = qtree.get_exports()
log.debug("exports: %s", [str(x) for x in exports])
self.failUnlessEqual(len(exports), 3)
self.failUnlessEqual(exports[0].fromip, '10.20.30.1')
