def simpledoc(noimagecopy=False):
"""Make a docx (document, relationships) for use in other docx tests"""
relationships = relationshiplist()
imagefiledict = {}
document = newdocument()
docbody = document.xpath('/w:document/w:body', namespaces=nsprefixes)[0]
docbody.append(heading('Heading 1', 1))
docbody.append(heading('Heading 2', 2))
docbody.append(paragraph('Paragraph 1'))
for point in ['List Item 1', 'List Item 2', 'List Item 3']:
docbody.append(paragraph(point, style='ListNumber'))
docbody.append(pagebreak(type='page'))
docbody.append(paragraph('Paragraph 2'))
docbody.append(
table([['A1', 'A2', 'A3'], ['B1', 'B2', 'B3'], ['C1', 'C2', 'C3']]))
docbody.append(pagebreak(type='section', orient='portrait'))
if noimagecopy:
relationships, picpara, imagefiledict = picture(
relationships,
IMAGE1_FILE,
'This is a test description',
imagefiledict=imagefiledict)
else:
relationships, picpara = picture(relationships, IMAGE1_FILE,
'This is a test description')
docbody.append(picpara)
docbody.append(pagebreak(type='section', orient='landscape'))
docbody.append(paragraph('Paragraph 3'))
if noimagecopy:
return (document, docbody, relationships, imagefiledict)
else:
return (document, docbody, relationships)
def append_table(
self,
lst_of_lst,
heading=True,
colw=None,
cwunit='dxa',
tblw=0,
twunit='auto',
borders={"all": {
"color": 'auto',
'val': 'single',
'sz': '4'
}},
column_style={
'all': {
'font_size': 10,
'spacing': {
'before': 0,
'after': 0
}
}
}):
"""
@param list contents: A list of lists describing contents. Every item in
the list can be a string or a valid XML element
itself. It can also be a list. In that case all the
listed elements will be merged into the cell.
@param bool heading: Tells whether first line should be treated as
heading or not
@param list colw: list of integer column widths specified in wunitS.
@param str cwunit: Unit used for column width:
'pct' : fiftieths of a percent
'dxa' : twentieths of a point
'nil' : no width
'auto' : automagically determined
@param int tblw: Table width
@param str twunit: Unit used for table width. Same possible values as
cwunit.
@param dict borders: Dictionary defining table border. Supported keys
are: 'top', 'left', 'bottom', 'right',
'insideH', 'insideV', 'all'.
When specified, the 'all' key has precedence over
others. Each key must define a dict of border
attributes:
color : The color of the border, in hex or
'auto'
space : The space, measured in points
sz : The size of the border, in eighths of
a point
val : The style of the border, see
http://www.schemacentral.com/sc/ooxml/t-w_ST_Border.htm
@param list celstyle: Specify the style for each colum, list of dicts.
supported keys:
'align' : specify the alignment, see paragraph
documentation."""
self.body.append(
table(lst_of_lst, heading, colw, cwunit, tblw, twunit, borders,
column_style))
def testtable():
"""Ensure tables make sense"""
testtable = table([['A1', 'A2'], ['B1', 'B2'], ['C1', 'C2']])
assert (testtable.xpath('/ns0:tbl/ns0:tr[2]/ns0:tc[2]/ns0:p/ns0:r/ns0:t',
namespaces={
'ns0':
('http://schemas.openxmlformats.org/wordproce'
'ssingml/2006/main')
})[0].text == 'B2')
def testtable():
"""Ensure tables make sense"""
testtable = table([["A1", "A2"], ["B1", "B2"], ["C1", "C2"]])
assert (
testtable.xpath(
"/ns0:tbl/ns0:tr[2]/ns0:tc[2]/ns0:p/ns0:r/ns0:t",
namespaces={"ns0": ("http://schemas.openxmlformats.org/wordproce" "ssingml/2006/main")},
)[0].text
== "B2"
)
def depart_table(self, node):
dprint()
lines = self.table[1:]
fmted_rows = []
# don't allow paragraphs in table cells for now
for line in lines:
if line == 'sep':
pass
else:
fmted_rows.append(line)
self.docbody.append(docx.table(fmted_rows))
self.table = None
self.end_state()
def append_table(self, lst_of_lst, heading=True, colw=None, cwunit='dxa', tblw=0, twunit='auto',
borders={"all":{"color":'auto', 'val':'single', 'sz':'4'}},
column_style={'all':{'font_size':10, 'spacing':{'before':0, 'after':0}}}):
"""
@param list contents: A list of lists describing contents. Every item in
the list can be a string or a valid XML element
itself. It can also be a list. In that case all the
listed elements will be merged into the cell.
@param bool heading: Tells whether first line should be treated as
heading or not
@param list colw: list of integer column widths specified in wunitS.
@param str cwunit: Unit used for column width:
'pct' : fiftieths of a percent
'dxa' : twentieths of a point
'nil' : no width
'auto' : automagically determined
@param int tblw: Table width
@param str twunit: Unit used for table width. Same possible values as
cwunit.
@param dict borders: Dictionary defining table border. Supported keys
are: 'top', 'left', 'bottom', 'right',
'insideH', 'insideV', 'all'.
When specified, the 'all' key has precedence over
others. Each key must define a dict of border
attributes:
color : The color of the border, in hex or
'auto'
space : The space, measured in points
sz : The size of the border, in eighths of
a point
val : The style of the border, see
http://www.schemacentral.com/sc/ooxml/t-w_ST_Border.htm
@param list celstyle: Specify the style for each colum, list of dicts.
supported keys:
'align' : specify the alignment, see paragraph
documentation."""
self.body.append(table(lst_of_lst, heading, colw, cwunit, tblw, twunit, borders, column_style))
def replaceTag(doc, tag, replace, fmt = {}):
""" Searches for {{tag}} and replaces it with replace.
Replace is a list with two indexes: 0=type, 1=The replacement
Supported values for type:
'str': <string> Renders a simple text string
'tab': <list> Renders a table, use fmt to tune look
"""
if replace[0] == 'str':
repl = unicode(replace[1])
elif replace[0] == 'tab':
# Will make a table
r = []
for el in replace[1]:
# Unicodize
r.append( map(lambda i: unicode(i), el) )
if not len(r):
# Empty table
repl = ''
else:
repl = docx.table(
r,
heading = fmt['heading'] if 'heading' in fmt.keys() else False,
colw = fmt['colw'] if 'colw' in fmt.keys() else None,
cwunit = fmt['cwunit'] if 'cwunit' in fmt.keys() else 'dxa',
tblw = fmt['tblw'] if 'tblw' in fmt.keys() else 0,
twunit = fmt['twunit'] if 'twunit' in fmt.keys() else 'auto',
borders = fmt['borders'] if 'borders' in fmt.keys() else {},
celstyle = fmt['celstyle'] if 'celstyle' in fmt.keys() else None,
headstyle = fmt['headstyle'] if 'headstyle' in fmt.keys() else {},
)
else:
raise NotImplementedError, "Unsupported " + replace[0] + " tag type!"
return docx.advReplace(doc, '\{\{'+re.escape(tag)+'\}\}', repl)
docbody.append(heading(u'''6. Найти инварианты графа, заданного матрицей смежности ''',1) )
# Create and insert basic table containing input info
Table_Basic=[]
for i in range(n+1):
Table_Basic.append([])
for j in range(n+1):
Table_Basic[i].append("")
for i in range(1,n+1):
Table_Basic[0][i] = "x"+str(i)
Table_Basic[i][0] = "x"+str(i)
for i in range(1,n+1):
for j in range(1, n+1):
Table_Basic[i][j]=str(A[i-1][j-1])
docbody.append(table(Table_Basic,False,borders={'all':{'color':'auto','space':1,'sz':1}}))
docbody.append(heading(u'Решение:',2))
docbody.append(paragraph(u'Согласно отношениям смежности, изобразим граф:'))
# Insert an image of graph
relationships,picpara = picture(relationships,'graph.png','',200,200)
docbody.append(picpara)
docbody.append(heading(u'1. Количество вершин n = %i'%(n),2))
docbody.append(heading(u'2. Количество ребер r = %i'%(r),2))
f = 2-n+r
docbody.append(heading(u'3. Количество граней f = %i'%(f),2))
docbody.append(paragraph('n-r+f = 2'))
def get_document_docx(filename, doc_id, start_index=1):
"""filename is a file like object (like an HttpResponse)"""
doc = get_doc_copy_with_references(doc_id, start_index=1)
H1 = partial(docx.heading,headinglevel=1)
H2 = partial(docx.heading,headinglevel=2)
N = partial(docx.paragraph,style='')
### Followed the example of the author of the library
relationships = docx.relationshiplist()
document = docx.newdocument()
docbody = document.xpath('/w:document/w:body', namespaces=docx.nsprefixes)[0]
docbody.append(docx.paragraph([('CERN - European Organisation for Nuclear Research','b')],jc='center'))
docbody.append(docx.paragraph([('1211 Geneva 23, Switzerland', 'b')],jc='center'))
### Unable to center the table, commending it for no
# docbody.append(docx.table(
# [[docx.paragraph([('Invitation to tender %s' % doc_id,'b')],jc='center')]],
# heading=False,
# borders={'all':{'color':'auto', 'size':'1', 'val':'single'}},
#
# ))
story = docbody
story.append(N(''))
story.append(N(''))
story.append(docx.paragraph([('Invitation to tender %s' % doc_id,'bu')],jc='center'))
story.append(N(''))
story.append(docx.paragraph([('Technical Specifications','bi')],jc='center'))
story.append(N(''))
if doc.get('intro', None):
story.append(H1(doc['intro_header'] or 'Scope of the invitaion to Tender'))
story.append(N(doc['intro']))
for sys in range(len(doc.get('systems',[]))):
system = doc['systems'][sys]
bt = "%d" % (start_index + sys)
story.append(N('\n\n'))
story.append(H1('%s. %s' % (bt, system['name'])))
if system['description']:
story.append(N(system['description']))
for sec in range(len(system.get('sections',[]))):
section=system['sections'][sec]
bt = '%d.%d' % (start_index + sys, sec+1)
story.append(
H2('%s. %s' % (bt, section['header']))
)
if section['description']:
story.append(N(section['description']))
for q in range(len(section.get('questions',[]))):
question = section['questions'][q]
bt = "%d.%d.%d" % (start_index + sys, sec+1, q+1)
story.append(N('\t%s. %s' % (bt, question['tech_spec'])))
if doc.get('contacts', None):
contacts_per_row=3
_cs = copy.deepcopy(doc.get('contacts',[]))
table_data = []
# let's pad the table
while len(_cs) % contacts_per_row != 0:
_cs.append(dict({u'type_':'', u'name':'', u'address':'',u'tel':'',u'fax':'', u'email':''}))
stack = []
for ci in range(len(_cs)):
stack.append(_cs[ci])
if len(stack) == contacts_per_row:
table_data.append([ u''] + [c['type_']+':' if c['type_'] else '' for c in stack])
table_data.append([u'Name'] + [c['name'] for c in stack])
table_data.append([u'Address'] + [c['address'].replace('\r','') for c in stack])
table_data.append([u'Tel'] + [c['tel'] for c in stack])
table_data.append([u'Fax'] + [c['fax'] for c in stack])
table_data.append([u'E-mail'] + [c['email'] for c in stack])
table_data.append([u'']*(contacts_per_row+1))
stack=[]
story.append(docx.pagebreak())
story.append(H1('Contacts'))
story.append(docx.table(table_data, heading=False))
# Create our properties, contenttypes, and other support files
coreprops = docx.coreproperties(title='Invitation to tender %s' % doc_id,subject='IT %s Technical Specifications',creator='Elisiano Petrini',keywords=['tender','Office Open XML','Word','%s' % doc_id])
appprops = docx.appproperties()
contenttypes = docx.contenttypes()
websettings = docx.websettings()
wordrelationships = docx.wordrelationships(relationships)
f = tempfile.NamedTemporaryFile(delete=False)
docx.savedocx(document,coreprops,appprops,contenttypes,websettings,wordrelationships, f.name)
f.close()
with open(f.name, 'rb') as f:
filename.write(f.read())
os.unlink(f.name)
return document
docbody.append(
dx.paragraph('''The docx module has the following features:''',
font='Arial',
fontsize=10))
# Add some bullets
for point in [
'Paragraphs', 'Bullets', 'Numbered lists',
'Multiple levels of headings', 'Tables', 'Document Properties'
]:
docbody.append(dx.paragraph(point, style='ListBullet'))
docbody.append(dx.paragraph('Tables are just lists of lists, like this:'))
# Append a table
docbody.append(
dx.table([['A1', 'A2', 'A3'], ['B1', 'B2', 'B3'], ['C1', 'C2', 'C3']]))
docbody.append(dx.heading('Editing documents', 2))
docbody.append(
dx.paragraph('Thanks to the awesomeness of the lxml module, we can:'))
for point in [
'Search and replace', 'Extract plain text of document',
'Add and delete items anywhere within the document'
]:
docbody.append(dx.paragraph(point, style='ListBullet'))
# Add an image
relationships, picpara = dx.picture(relationships, 'image1.png',
'This is a test description')
docbody.append(picpara)
# Add a numbered list
for point in ['''COM automation''','''.net or Java''','''Automating OpenOffice or MS Office''']:
docbody.append(dx.paragraph(point,style='ListNumber'))
docbody.append(dx.paragraph('''For those of us who prefer something simpler, I made docx.'''))
docbody.append(dx.heading('Making documents',2))
docbody.append(dx.paragraph('''The docx module has the following features:''', font='Arial', fontsize=10))
# Add some bullets
for point in ['Paragraphs','Bullets','Numbered lists','Multiple levels of headings','Tables','Document Properties']:
docbody.append(dx.paragraph(point,style='ListBullet'))
docbody.append(dx.paragraph('Tables are just lists of lists, like this:'))
# Append a table
docbody.append(dx.table([['A1','A2','A3'],['B1','B2','B3'],['C1','C2','C3']]))
docbody.append(dx.heading('Editing documents',2))
docbody.append(dx.paragraph('Thanks to the awesomeness of the lxml module, we can:'))
for point in ['Search and replace',
'Extract plain text of document',
'Add and delete items anywhere within the document']:
docbody.append(dx.paragraph(point, style='ListBullet'))
# Add an image
relationships, picpara = dx.picture(
relationships,
'image1.png',
'This is a test description')
docbody.append(picpara)
n_oths = len(ouothers[key] if key in ouothers else [])
n_tot = n_rarts + n_nrarts + n_oths
stats_table.append(
[key, str(n_rarts),
str(n_nrarts),
str(n_oths),
str(n_tot)])
stats_table.append([
"TOTAL Eawag",
str(len(allrarts)),
str(len(allnrarts)),
str(len(alloths)),
str(len(outvals))
])
doc_body.append(
docx.table(stats_table, colw=[2000, 1700, 1700, 1700, 1700], cwunit='dxa'))
doc_body.append(
docx.paragraph([
"Note: Articles include the publication types \"" + "\", \"".join(
[articlegenres[k] for k in range(len(articlegenres) - 1)]) +
"\" and \"" + articlegenres[len(articlegenres) - 1] +
"\", whereas Others include the publication types \"" +
"\", \"".join([othergenres[k] for k in range(len(othergenres) - 1)]) +
"\" and \"" + othergenres[len(othergenres) - 1] + "\".", ''
]))
doc_body.append(
docx.heading(
" / ".join(articlegenres) + u" \u2013 " + rkey + " (" +
str(len(allrarts)) + ")", 2))
for n in allrarts:
makeref(doc_body, outvals[n])
# Add a numbered list
for point in ['''COM automation''', '''.net or Java''', '''Automating OpenOffice or MS Office''']:
docbody.append( docx.paragraph( point, style = 'ListNumber' ) )
docbody.append( docx.paragraph( '''For those of us who prefer something simpler, I made docx.''' ) )
docbody.append( docx.heading( 'Making documents', 2 ) )
docbody.append( docx.paragraph( '''The docx module has the following features:''' ) )
# Add some bullets
for point in ['Paragraphs', 'Bullets', 'Numbered lists', 'Multiple levels of headings', 'Tables', 'Document Properties']:
docbody.append( docx.paragraph( point, style = 'ListBullet' ) )
docbody.append( docx.paragraph( 'Tables are just lists of lists, like this:' ) )
# Append a table
docbody.append( docx.table( [['A1', 'A2', 'A3'], ['B1', 'B2', 'B3'], ['C1', 'C2', 'C3']] ) )
docbody.append( docx.heading( 'Editing documents', 2 ) )
docbody.append( docx.paragraph( 'Thanks to the awesomeness of the lxml module, we can:' ) )
for point in ['Search and replace', 'Extract plain text of document', 'Add and delete items anywhere within the document']:
docbody.append( docx.paragraph( point, style = 'ListBullet' ) )
# Add an image
relationships, picpara = docx.picture( relationships, 'image1.png', 'This is a test description' )
docbody.append( picpara )
# Search and replace
print 'Searching for something in a paragraph ...',
if docx.search( docbody, 'the awesomeness' ): print 'found it!'
else: print 'nope.'
def simpledoc(noimagecopy=False):
"""Make a docx (document, relationships) for use in other docx tests"""
relationships = relationshiplist()
imagefiledict = {}
document = newdocument()
docbody = document.xpath("/w:document/w:body", namespaces=nsprefixes)[0]
docbody.append(heading("Heading 1", 1))
docbody.append(heading("Heading 2", 2))
docbody.append(paragraph("Paragraph 1"))
for point in ["List Item 1", "List Item 2", "List Item 3"]:
docbody.append(paragraph(point, style="ListNumber"))
docbody.append(pagebreak(type="page"))
docbody.append(paragraph("Paragraph 2"))
docbody.append(table([["A1", "A2", "A3"], ["B1", "B2", "B3"], ["C1", "C2", "C3"]]))
docbody.append(pagebreak(type="section", orient="portrait"))
if noimagecopy:
relationships, picpara, imagefiledict = picture(
relationships, IMAGE1_FILE, "This is a test description", imagefiledict=imagefiledict
)
else:
relationships, picpara = picture(relationships, IMAGE1_FILE, "This is a test description")
docbody.append(picpara)
docbody.append(pagebreak(type="section", orient="landscape"))
docbody.append(paragraph("Paragraph 3"))
if noimagecopy:
return (document, docbody, relationships, imagefiledict)
else:
return (document, docbody, relationships)
