def _mdp_reply_devices_delete_result(self, data):
status = True
reason = False
try:
did = data.get_data()['did']
if did:
res = self._db.del_device(did)
if not res:
status = False
else:
status = True
else:
status = False
reason = "Device delete failed"
# delete done
self.reload_stats()
except DbHelperException as d:
status = False
reason = "Error while deleting device: {0}".format(d.value)
except:
status = False
reason = "Error while deleting device: {0}".format(traceback.format_exc())
# send the result
msg = MQMessage()
msg.set_action('device.delete.result')
msg.add_data('status', status)
if reason:
msg.add_data('reason', reason)
self.log.debug(msg.get())
self.reply(msg.get())
def sendToMQ(self, message):
try:
ctx = zmq.Context()
jsons = json.loads(message)
# req/rep
if 'mq_request' in jsons and 'data' in jsons:
cli = MQSyncReq(ctx)
msg = MQMessage()
msg.set_action(str(jsons['mq_request']))
msg.set_data(jsons['data'])
print(u"REQ : {0}".format(msg.get()))
if 'dst' in jsons:
dst = str(jsons['dst'])
else:
dst = 'manager'
res = cli.request(dst, msg.get(), timeout=10)
if res:
print(res.get())
cli.shutdown()
del cli
# pub
elif 'mq_publish' in jsons and 'data' in jsons:
self.pub.send_event(jsons['mq_publish'],
jsons['data'])
except Exception as e:
print(u"Error sending mq message: {0}".format(e))
def on_message(self, msg, content=None):
#print(ws_list.list())
""" This function is quite tricky
It is called by both WebSocketHandler and MQASyncSub...
"""
try:
### websocket message (from the web)
# there are the mesages send by the administration javascript part thanks to the ws.send(...) function
if not content:
jsons = json.loads(msg)
# req/rep
if 'mq_request' in jsons and 'data' in jsons:
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action(str(jsons['mq_request']))
msg.set_data(jsons['data'])
if 'dst' in jsons:
cli.request(str(jsons['dst']), msg.get(), timeout=10).get()
else:
cli.request('manager', msg.get(), timeout=10).get()
# pub
elif 'mq_publish' in jsons and 'data' in jsons:
print("Publish : {0}".format(jsons['data']))
self.pub.send_event(jsons['mq_publish'],
jsons['data'])
### MQ message (from domogik)
# these are the published messages which are received here
else:
try:
self.write_message({"msgid": msg, "content": content})
except WebSocketClosedError:
self.close()
except:
print("Error : {0}".format(traceback.format_exc()))
def sendToMQ(self, message):
try:
ctx = zmq.Context()
jsons = json.loads(message)
# req/rep
if 'mq_request' in jsons and 'data' in jsons:
cli = MQSyncReq(ctx)
msg = MQMessage()
msg.set_action(str(jsons['mq_request']))
msg.set_data(jsons['data'])
print(u"REQ : {0}".format(msg.get()))
if 'dst' in jsons:
dst = str(jsons['dst'])
else:
dst = 'manager'
res = cli.request(dst, msg.get(), timeout=10)
if res:
print(res.get())
cli.shutdown()
del cli
# pub
elif 'mq_publish' in jsons and 'data' in jsons:
self.pub.send_event(jsons['mq_publish'], jsons['data'])
except Exception as e:
print(u"Error sending mq message: {0}".format(e))
def scenario_edit(id):
default_json = '{"type":"dom_condition","id":"1","deletable":false}'
# laod the json
if int(id) == 0:
name = "New scenario"
jso = default_json
dis = 0
else:
with app.db.session_scope():
scen = app.db.get_scenario(id)
jso = scen.json
dis = scen.disabled
name = scen.name
jso.replace('\n', '').replace('\r', '')
# create a form
class F(Form):
sid = HiddenField("id", default=id)
sname = TextField("name", default=name)
sdis = BooleanField("disabled", default=dis)
sjson = HiddenField("json")
submit = SubmitField("Send")
pass
form = F()
if request.method == 'POST' and form.validate():
flash(gettext("Changes saved"), "success")
return redirect("/scenario")
pass
else:
# Fetch all known actions
actions = []
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('action.list')
res = cli.request('scenario', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'result' in res:
res = res['result']
actions = res.keys()
# Fetch all known tests
tests = []
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('test.list')
res = cli.request('scenario', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'result' in res:
res = res['result']
tests = res.keys()
# ouput
return render_template('scenario_edit.html',
mactive="scenario",
form=form,
name=name,
actions=actions,
tests=tests,
jso=jso)
def on_mdp_request(self, msg):
""" Called when a MQ req/rep message is received
"""
Plugin.on_mdp_request(self, msg)
self.log.info(u"Received 0MQ messages: {0}".format(msg))
action = msg.get_action().split(".")
if action[0] == "client" and action[1] == "cmd" :
# action on dmg device
data = msg.get_data()
reply_msg = MQMessage()
reply_msg.set_action('client.cmd.result')
idsClient = self.managerClients.getIdsClient(data)
find = False
if idsClient != [] :
for id in idsClient :
client = self.managerClients.getClient(id)
if client :
self.log.debug(u"Handle requested action for Notify client {0} : {1}".format(id, data))
commands = client.getDmgCommands()
for cmd in commands :
if commands[cmd]['id'] == data['command_id'] :
find = True
client.handle_cmd(data)
reply_msg.add_data('status', True)
reply_msg.add_data('reason', None)
break
if not find :
self.log.warning(u"Requested action received for unknown Notify client : {0}".format(data))
reply_msg.add_data('status', False)
reply_msg.add_data('reason', u"Requested action received for unknown Notify client : {0}".format(data))
self.log.debug(u"Reply to MQ: {0}".format(reply_msg.get()))
self.reply(reply_msg.get())
def scenario_edit(id):
default_json = '{"type":"dom_condition","id":"1","deletable":false}'
# laod the json
if int(id) == 0:
name = "New scenario"
jso = default_json
dis = 0
else:
with app.db.session_scope():
scen = app.db.get_scenario(id)
jso = scen.json
dis = scen.disabled
name = scen.name
jso.replace('\n', '').replace('\r', '')
# create a form
class F(Form):
sid = HiddenField("id", default=id)
sname = TextField("name", default=name)
sdis = BooleanField("disabled", default=dis)
sjson = HiddenField("json")
submit = SubmitField("Send")
pass
form = F()
if request.method == 'POST' and form.validate():
flash(gettext("Changes saved"), "success")
return redirect("/scenario")
pass
else:
# Fetch all known actions
actions = []
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('action.list')
res = cli.request('scenario', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'result' in res:
res = res['result']
actions = res.keys()
# Fetch all known tests
tests = []
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('test.list')
res = cli.request('scenario', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'result' in res:
res = res['result']
tests = res.keys()
# ouput
return render_template('scenario_edit.html',
mactive = "scenario",
form = form,
name = name,
actions = actions,
tests = tests,
jso = jso)
def _mdp_reply_config_set(self, data):
""" Reply to config.set MQ req
@param data : MQ req message
"""
msg = MQMessage()
msg.set_action('config.result')
status = True
msg_data = data.get_data()
if 'type' not in msg_data:
status = False
reason = "Config set : missing 'type' field : {0}".format(data)
if msg_data['type'] not in ["plugin", "brain", "interface"]:
status = False
reason = "You are not able to configure items for type={0}".format(
msg_data['type'])
if 'name' not in msg_data:
status = False
reason = "Config set : missing 'name' field : {0}".format(data)
if 'host' not in msg_data:
status = False
reason = "Config set : missing 'host' field : {0}".format(data)
if 'data' not in msg_data:
status = False
reason = "Config set : missing 'data' field : {0}".format(data)
if status == False:
self.log.error(reason)
else:
reason = ""
type = msg_data['type']
name = msg_data['name']
host = msg_data['host']
data = msg_data['data']
msg.add_data('type', type)
msg.add_data('name', name)
msg.add_data('host', host)
try:
# we add a configured key set to true to tell the UIs and plugins that there are some configuration elements
self._db.set_plugin_config(type, name, host, "configured",
True)
for key in msg_data['data']:
self._db.set_plugin_config(type, name, host, key,
data[key])
self.publish_config_updated(type, name, host)
except:
reason = "Error while setting configuration for '{0} {1} on {2}' : {3}".format(
type, name, host, traceback.format_exc())
status = False
self.log.error(reason)
msg.add_data('status', status)
msg.add_data('reason', reason)
self.log.debug(msg.get())
self.reply(msg.get())
def _mdp_reply_devices_update_result(self, data):
status = True
reason = False
self.log.debug(u"Updating device : {0}".format(data))
try:
data = data.get_data()
if 'did' in data:
did = data['did']
if 'name' not in data:
name = None
else:
name = data['name']
if 'reference' not in data:
ref = None
else:
ref = data['reference']
if 'description' not in data:
desc = None
else:
desc = data['description']
# do the update
res = self._db.update_device(did, \
d_name=name, \
d_description=desc, \
d_reference=ref)
if not res:
status = False
else:
status = True
else:
status = False
reason = "There is no such device"
self.log.debug(reason)
# delete done
except DbHelperException as d:
status = False
reason = "Error while updating device: {0}".format(d.value)
self.log.error(reason)
except:
status = False
reason = "Error while updating device: {0}".format(
traceback.format_exc())
self.log.error(reason)
# send the result
msg = MQMessage()
msg.set_action('device.update.result')
msg.add_data('status', status)
if reason:
msg.add_data('reason', reason)
self.log.debug(msg.get())
self.reply(msg.get())
# send the pub message
if status and res:
self._pub.send_event('device.update', {
"device_id": res.id,
"client_id": res.client_id
})
def _mdp_reply_devices_update_result(self, data):
status = True
reason = False
self.log.debug(u"Updating device : {0}".format(data))
try:
data = data.get_data()
if 'did' in data:
did = data['did']
if 'name' not in data:
name = None
else:
name = data['name']
if 'reference' not in data:
ref = None
else:
ref = data['reference']
if 'description' not in data:
desc = None
else:
desc = data['description']
# do the update
res = self._db.update_device(did, \
d_name=name, \
d_description=desc, \
d_reference=ref)
if not res:
status = False
else:
status = True
else:
status = False
reason = "There is no such device"
self.log.debug(reason)
# delete done
except DbHelperException as d:
status = False
reason = "Error while updating device: {0}".format(d.value)
self.log.error(reason)
except:
status = False
reason = "Error while updating device: {0}".format(traceback.format_exc())
self.log.error(reason)
# send the result
msg = MQMessage()
msg.set_action('device.update.result')
msg.add_data('status', status)
if reason:
msg.add_data('reason', reason)
self.log.debug(msg.get())
self.reply(msg.get())
# send the pub message
if status and res:
self._pub.send_event('device.update',
{"device_id" : res.id,
"client_id" : res.client_id})
def _mdp_reply_config_set(self, data):
""" Reply to config.set MQ req
@param data : MQ req message
"""
print "#################"
msg = MQMessage()
msg.set_action('config.result')
status = True
msg_data = data.get_data()
if 'type' not in msg_data:
status = False
reason = "Config set : missing 'type' field : {0}".format(data)
if msg_data['type'] != "plugin":
status = False
reason = "Config set not available for type={0}".format(msg_data['type'])
if 'name' not in msg_data:
status = False
reason = "Config set : missing 'name' field : {0}".format(data)
if 'host' not in msg_data:
status = False
reason = "Config set : missing 'host' field : {0}".format(data)
if 'data' not in msg_data:
status = False
reason = "Config set : missing 'data' field : {0}".format(data)
if status == False:
self.log.error(reason)
else:
reason = ""
type = msg_data['type']
name = msg_data['name']
host = msg_data['host']
data = msg_data['data']
msg.add_data('type', type)
msg.add_data('name', name)
msg.add_data('host', host)
try:
# we add a configured key set to true to tell the UIs and plugins that there are some configuration elements
self._db.set_plugin_config(name, host, "configured", True)
for key in msg_data['data']:
self._db.set_plugin_config(name, host, key, data[key])
self.publish_config_updated(type, name, host)
except:
reason = "Error while setting configuration for '{0} {1} on {2}' : {3}".format(type, name, host, traceback.format_exc())
status = False
self.log.error(reason)
msg.add_data('status', status)
msg.add_data('reason', reason)
self.log.debug(msg.get())
self.reply(msg.get())
def _mdp_reply_devices_create_result(self, data):
status = True
reason = False
result = False
# get the filled package json
params = data.get_data()['data']
# get the json
cli = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action('device_types.get')
msg.add_data('device_type', params['device_type'])
res = cli.request('manager', msg.get(), timeout=10)
del cli
if res is None:
status = False
reason = "Manager is not replying to the mq request"
pjson = res.get_data()
if pjson is None:
status = False
reason = "No data for {0} found by manager".format(
params['device_type'])
pjson = pjson[params['device_type']]
if pjson is None:
status = False
reason = "The json for {0} found by manager is empty".format(
params['device_type'])
if status:
# call the add device function
res = self._db.add_full_device(params, pjson)
if not res:
status = False
reason = "An error occured while adding the device in database. Please check the file dbmgr.log for more informations"
else:
status = True
reason = False
result = res
msg = MQMessage()
msg.set_action('device.create.result')
if reason:
msg.add_data('reason', reason)
if result:
msg.add_data('result', result)
msg.add_data('status', status)
self.log.debug(msg.get())
self.reply(msg.get())
# send the pub message
if status and res:
self._pub.send_event('device.update', {
"device_id": res['id'],
"client_id": res['client_id']
})
def _mdp_reply_config_delete(self, data):
""" Reply to config.delete MQ req
Delete all the config items for the given type, name and host
@param data : MQ req message
"""
msg = MQMessage()
msg.set_action('config.result')
status = True
msg_data = data.get_data()
if 'type' not in msg_data:
status = False
reason = "Config request : missing 'type' field : {0}".format(data)
if msg_data['type'] not in ["plugin", "brain", "interface"]:
status = False
reason = "Configuration deletion not available for type={0}".format(
msg_data['type'])
if 'name' not in msg_data:
status = False
reason = "Config request : missing 'name' field : {0}".format(data)
if 'host' not in msg_data:
status = False
reason = "Config request : missing 'host' field : {0}".format(data)
if status == False:
self.log.error(reason)
else:
reason = ""
type = msg_data['type']
name = msg_data['name']
host = msg_data['host']
msg.add_data('type', type)
msg.add_data('name', name)
msg.add_data('host', host)
try:
self._db.del_plugin_config(type, name, host)
self.log.info(u"Delete config for {0} {1}".format(type, name))
self.publish_config_updated(type, name, host)
except:
status = False
reason = "Error while deleting configuration for '{0} {1} on {2} : {3}".format(
type, name, host, traceback.format_exc())
self.log.error(reason)
msg.add_data('reason', reason)
msg.add_data('status', status)
self.log.debug(msg.get())
self.reply(msg.get())
def _mdp_reply_devices_create_result(self, data):
status = True
reason = False
result = False
# get the filled package json
params = data.get_data()['data']
# get the json
cli = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action('device_types.get')
msg.add_data('device_type', params['device_type'])
res = cli.request('manager', msg.get(), timeout=10)
del cli
if res is None:
status = False
reason = "Manager is not replying to the mq request"
pjson = res.get_data()
if pjson is None:
status = False
reason = "No data for {0} found by manager".format(params['device_type'])
pjson = pjson[params['device_type']]
if pjson is None:
status = False
reason = "The json for {0} found by manager is empty".format(params['device_type'])
if status:
# call the add device function
res = self._db.add_full_device(params, pjson)
if not res:
status = False
reason = "An error occured while adding the device in database. Please check the file dbmgr.log for more informations"
else:
status = True
reason = False
result = res
msg = MQMessage()
msg.set_action('device.create.result')
if reason:
msg.add_data('reason', reason)
if result:
msg.add_data('result', result)
msg.add_data('status', status)
self.log.debug(msg.get())
self.reply(msg.get())
# send the pub message
if status and res:
self._pub.send_event('device.update',
{"device_id" : res['id'],
"client_id" : res['client_id']})
def _mdp_reply_config_delete(self, data):
""" Reply to config.delete MQ req
Delete all the config items for the given type, name and host
@param data : MQ req message
"""
msg = MQMessage()
msg.set_action('config.result')
status = True
msg_data = data.get_data()
if 'type' not in msg_data:
status = False
reason = "Config request : missing 'type' field : {0}".format(data)
if msg_data['type'] not in ["plugin", "brain", "interface"]:
status = False
reason = "Configuration deletion not available for type={0}".format(msg_data['type'])
if 'name' not in msg_data:
status = False
reason = "Config request : missing 'name' field : {0}".format(data)
if 'host' not in msg_data:
status = False
reason = "Config request : missing 'host' field : {0}".format(data)
if status == False:
self.log.error(reason)
else:
reason = ""
type = msg_data['type']
name = msg_data['name']
host = msg_data['host']
msg.add_data('type', type)
msg.add_data('name', name)
msg.add_data('host', host)
try:
self._db.del_plugin_config(type, name, host)
self.log.info(u"Delete config for {0} {1}".format(type, name))
self.publish_config_updated(type, name, host)
except:
status = False
reason = "Error while deleting configuration for '{0} {1} on {2} : {3}".format(type, name, host, traceback.format_exc())
self.log.error(reason)
msg.add_data('reason', reason)
msg.add_data('status', status)
self.log.debug(msg.get())
self.reply(msg.get())
def client_devices_new(client_id):
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('client.detail.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
detaila = res.get_data()
data = detaila[client_id]['data']
else:
data = {}
if type(data["device_types"]) is not dict:
dtypes = {}
else:
dtypes = list(data["device_types"].keys())
products = {}
if "products" in data:
for prod in data["products"]:
products[prod["name"]] = prod["type"]
return render_template('client_device_new.html',
device_types=dtypes,
products=products,
clientid=client_id,
mactive="clients",
active='devices')
def client_devices_edit(client_id, did):
with app.db.session_scope():
device = app.db.get_device_sql(did)
MyForm = model_form(Device, \
base_class=Form, \
db_session=app.db.get_session(),
exclude=['params', 'commands', 'sensors', 'address', 'xpl_commands', 'xpl_stats', 'device_type_id', 'client_id', 'client_version'])
form = MyForm(request.form, device)
if request.method == 'POST' and form.validate():
# save it
app.db.update_device(did, \
d_name=request.form['name'], \
d_description=request.form['description'], \
d_reference=request.form['reference'])
# message the suer
flash(gettext("Device saved"), 'success')
# reload stats
req = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('reload')
resp = req.request('xplgw', msg.get(), 100)
# redirect
return redirect("/client/{0}/dmg_devices/known".format(client_id))
else:
return render_template('client_device_edit.html',
form=form,
clientid=client_id,
mactive="clients",
active='devices')
def test_XplCmd(self, parameters={}, statParams=None):
"""Send an Xpl cmd with statics parameters by request, if necessary start testcase listener for ack message and
check if insert in database is ok.
"""
if self.get_return_confirmation():
schema, data, statResult = self.get_XplStat_fromAck(statParams)
th = threading.Thread(
None, self.assert_Xpl_Stat_Ack_Wait,
"th_test_0110_xpl-ack_from_{0}".format(self.command_name),
(schema, data, statResult))
th.start()
time.sleep(1)
else:
print(u"No ack required for {0}".format(self.command_name))
if self._device and self.command_id:
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('cmd.send')
msg.add_data('cmdid', self.command_id)
msg.add_data('cmdparams', parameters)
print(u"Send xpl_cmnd {0}".format(self.command_name))
cli.request('xplgw', msg.get(), timeout=10)
# if self.get_return_confirmation() :
# self.assert_get_last_command_in_db(statResult)
# else :
# print (u"No ack required for {0}".format(self.command_name))
return True
else:
return False
def on_mdp_request(self, msg):
""" Called when a MQ req/rep message is received
"""
Plugin.on_mdp_request(self, msg)
if msg.get_action() == "client.cmd":
data = msg.get_data()
self.log.info(u"==> Received 0MQ messages data: %s" % format(data))
# ==> Received 0MQ messages data: {u'command_id': 35, u'value': u'1', u'device_id': 112}
# ==> Received 0MQ messages data: {u'command_id': 36, u'value': u'128', u'device_id': 113}
# ==> Received 0MQ messages data: {u'command_id': 37, u'value': u'Bonjour', u'device_id': 114}
# search for related device
for a_device in self.devices:
for a_cmd in a_device['commands']:
if data['command_id'] == a_device['commands'][a_cmd]['id']:
# As we will just execute a shell script, we can't really known if the command will be ok and how long it will take...
# so we respond first on MQ to say we got the request
self.log.info("Reply to command 0MQ")
reply_msg = MQMessage()
reply_msg.set_action('client.cmd.result')
reply_msg.add_data('status', True)
reply_msg.add_data('reason', '')
self.reply(reply_msg.get())
# Now, launch the speak action !
ip = self.get_parameter(a_device, "ip")
lang = 'fr-FR'
thr_speak = threading.Thread(None,
self.yi.speak,
"speak",
(ip, lang, data['text'], self.get_data_files_directory),
{})
thr_speak.start()
self.register_thread(thr_speak)
def __init__(self, log=None, trigger=None):
AbstractParameter.__init__(self, log, trigger)
self.log = log
#self.set_type("string")
#self.add_expected_entry("sensor_id", "integer", "The sensor id to check")
# first, let's get the devices list
try:
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('device.get')
json_devices = cli.request('dbmgr', msg.get(), timeout=10).get()[1]
devices = json.loads(json_devices)['devices']
print(devices)
sensors_list = []
for dev in devices:
name = dev['name']
for sen_idx in dev['sensors']:
sen_name = dev['sensors'][sen_idx]['name']
sen_id = dev['sensors'][sen_idx]['id']
sensors_list.append([
'{0} : {1}'.format(name, sen_name),
'{0}'.format(sen_id)
])
print(sensors_list)
except:
self.log.error("Error while getting devices list : {0}".format(
traceback.format_exc()))
# then, et's configure our sensor id selector :)
self.set_type("list")
self.add_expected_entry("sensor_id", "list", "The sensor id to check")
#list_sensors = [['sensor1', 'sensor2'], ['a', 'A']]
self.set_list_of_values("sensor_id", sensors_list)
def test_XplCmd(self, parameters = {}, statParams = None):
"""Send an Xpl cmd with statics parameters by request, if necessary start testcase listener for ack message and
check if insert in database is ok.
"""
if self.get_return_confirmation() :
schema, data, statResult = self.get_XplStat_fromAck(statParams)
th = threading.Thread(None, self.assert_Xpl_Stat_Ack_Wait, "th_test_0110_xpl-ack_from_{0}".format(self.command_name), (schema, data, statResult))
th.start()
time.sleep(1)
else :
print (u"No ack required for {0}".format(self.command_name))
if self._device and self.command_id :
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('cmd.send')
msg.add_data('cmdid', self.command_id)
msg.add_data('cmdparams', parameters)
print (u"Send xpl_cmnd {0}".format(self.command_name))
cli.request('xplgw', msg.get(), timeout=10)
# if self.get_return_confirmation() :
# self.assert_get_last_command_in_db(statResult)
# else :
# print (u"No ack required for {0}".format(self.command_name))
return True
else : return False
def __init__(self, log, dbid, name, json, disabled):
""" Create the instance
@param log : A logger instance
@param dbid : The id of this scenario in the db
@param json : The json describing the scenario
"""
self._log = log
self._name = name
self._json = json
self._disabled = disabled
self.zmq = zmq.Context()
# datatypes
self.datatypes = {}
cli = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action('datatype.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'datatypes' in res:
self.datatypes = res['datatypes']
self._parsed_condition = None
self._mapping = {'test': {}, 'action': {}}
if not self._disabled:
self._instanciate()
def WSCommandSend(self, data):
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('cmd.send')
msg.add_data('cmdid', data['command_id'])
msg.add_data('cmdparams', data['parameters'])
return cli.request('xplgw', msg.get(), timeout=10).get()
def request_startup(self):
""" Request the plugin to start over the manager
"""
print(
u"Request plugin startup to the manager for '{0}' on '{1}'".format(
self.name, self.host))
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('plugin.start.do')
msg.add_data('name', self.name)
msg.add_data('host', self.host)
result = cli.request('manager', msg.get(), timeout=10)
if result:
msgid, content = result.get()
content = json.loads(content)
print(u"Response from the manager : {0}".format(content))
if content['status']:
print(u"Plugin started")
return True
else:
print(u"Error : plugin not started")
return False
else:
raise RuntimeError(
"MQ Timeout when requesting manager to start the plugin")
def on_mdp_request(self, msg):
""" Called when a MQ req/rep message is received
"""
Plugin.on_mdp_request(self, msg)
#self.log.debug(u"==> Received 0MQ messages: %s" % format(msg))
if msg.get_action() == "client.cmd":
data = msg.get_data()
self.log.debug(u"==> Received 0MQ messages data: %s" %
format(data))
# ==> Received 0MQ messages data: {u'command_id': 35, u'value': u'1', u'device_id': 112}
# ==> Received 0MQ messages data: {u'command_id': 36, u'value': u'128', u'device_id': 113}
# ==> Received 0MQ messages data: {u'command_id': 37, u'value': u'Bonjour', u'device_id': 114}
sensor_id = self.get_related_sensor_id(data['device_id'],
data['command_id'])
self.log.debug(u"Storing data for sensor_id = {0} : '{1}'".format(
sensor_id, data["value"]))
status, reason = self.send_data(sensor_id, data["value"])
self.log.info("Reply to command 0MQ")
reply_msg = MQMessage()
reply_msg.set_action('client.cmd.result')
reply_msg.add_data('status', status)
reply_msg.add_data('reason', reason)
self.reply(reply_msg.get())
def _mdp_reply_client_stop(self, data):
""" Stop the client
@param data : MQ req message
First, send the MQ Rep to 'ack' the request
Then, change the client status to STATUS_STOP_REQUEST
Then, quit the client by calling force_leave(). This should make the client send a STATUS_STOPPED if all is ok
Notice that no check is done on the MQ req content : we need nothing in it as it is directly addressed to a client
"""
# check if the message is for us
content = data.get_data()
if content['name'] != self._name or content['host'] != self.get_sanitized_hostname():
return
### Send the ack over MQ Rep
msg = MQMessage()
msg.set_action('plugin.stop.result')
status = True
reason = ""
msg.add_data('status', status)
msg.add_data('reason', reason)
msg.add_data('name', self._name)
msg.add_data('host', self.get_sanitized_hostname())
self.log.info("Send reply for the stop request : {0}".format(msg))
self.reply(msg.get())
### Change the client status
self._set_status(STATUS_STOP_REQUEST)
### Try to stop the client
# if it fails, the manager should try to kill the client
self.force_leave()
def send_to_butler(self, command_line, widget_proxy, live):
you = u"You > {0}".format(command_line)
self.parent.value.set_values(self.parent.value.get() + [you])
self.parent.wMain.values = self.parent.value.get()
self.parent.wMain.display()
# handle special commands
if command_line.lower() == "quit":
IOLoop.instance().stop()
sys.exit(0) # why is this needed ?
elif command_line.lower() == "reload":
try:
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('butler.reload.do')
result = cli.request('butler', msg.get(), timeout=10).get()
if result:
msg = "*** action reload : {0}".format(result)
self.parent.value.set_values(self.parent.value.get() + [msg])
except:
msg = u"*** action reload : error (is butler component ok ?)"
self.parent.value.set_values(self.parent.value.get() + [msg])
# handle butler
else:
self.parent.butler_cb(command_line, identity = "cli user", media = "chat", location = None, mood = None)
self.parent.wMain.values = self.parent.value.get()
self.parent.wMain.display()
def _mdp_reply_sensor_history(self, data):
""" Reply to sensor_history.get MQ req
@param data : MQ req message
If no other param than the sensor id, return the last value
"""
msg = MQMessage()
msg.set_action('sensor_history.result')
status = True
reason = ""
msg_data = data.get_data()
try:
sensor_id = msg_data['sensor_id']
history = self._db.list_sensor_history(sensor_id, 1)
if len(history) == 0:
last_value = None
else:
last_value = self._db.list_sensor_history(sensor_id, 1)[0].value_str
except:
self.log.error("ERROR when getting sensor history for id = {0} : {1}".format(sensor_id, traceback.format_exc()))
reason = "ERROR : {0}".format(traceback.format_exc())
status = False
msg.add_data('status', status)
msg.add_data('reason', reason)
msg.add_data('sensor_id', sensor_id)
msg.add_data('values', [last_value])
self.reply(msg.get())
def _mdp_reply_butler_history(self, message):
""" Butler history
"""
msg = MQMessage()
msg.set_action('butler.history.result')
msg.add_data("history", self.history)
self.reply(msg.get())
def delete_configuration(type, name, host):
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action("config.delete")
msg.add_data("type", type)
msg.add_data("host", host)
msg.add_data("name", name)
result = cli.request("dbmgr", msg.get(), timeout=10)
if result:
data = result.get_data()
if "status" in data:
if not data["status"]:
print(result.get())
raise RuntimeError(
"DbMgr did not return status true on a config.set for {0}-{1}.{2} : {3} = {4}".format(
type, name, host, key, value
)
)
else:
return True
else:
print(result.get())
raise RuntimeError(
"DbMgr did not return a status on a config.set for {0}-{1}.{2} : {3} = {4}".format(
type, name, host, key, value
)
)
else:
raise RuntimeError("Timeout while deleting configuration for {0}-{1}.{2}".format(type, name, host))
def _mdp_reply_butler_features(self, message):
""" Butler features
"""
msg = MQMessage()
msg.set_action('butler.features.result')
msg.add_data("features", self.butler_features)
self.reply(msg.get())
def request_stop(self):
""" Request the plugin to stop
"""
print(u"Request plugin to stop : '{0}' on '{1}'".format(
self.name, self.host))
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('plugin.stop.do')
msg.add_data('name', self.name)
msg.add_data('host', self.host)
result = cli.request("plugin-{0}.{1}".format(self.name, self.host),
msg.get(),
timeout=30)
if result:
msgid, content = result.get()
content = json.loads(content)
print(u"Response : {0}".format(content))
if content['status']:
print(u"Plugin stopped")
return True
else:
print(u"Error : plugin not stopped")
return False
else:
raise RuntimeError(
"MQ Timeout when requesting to stop the plugin (the plugin didn't stop itself)"
)
def _load_client_to_xpl_target(self):
""" Request the client conversion info
This is an mq req to manager
If this function does not call self._parse_xpl_target(), all xpl sensors will not be procesed!
"""
nb_try = 0
max_try = 5
ok = False
while nb_try <= max_try and ok == False:
nb_try += 1
cli = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action('client.list.get')
response = cli.request('manager', msg.get(), timeout=10)
if response:
self._parse_xpl_target(response.get_data())
ok = True
else:
self.log.error(\
u"Updating client list failed, no response from manager (try number {0}/{1})".format(nb_try, max_try))
# We fail to load the client list, so we wait to get something
time.sleep(5)
if ok == True:
self.log.info(u"Updating client list success")
else:
self.log.error(u"Updating client list failed too much time! The xpl sensors will not be processed by this component")
def WSCommandSend(self, data):
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('cmd.send')
msg.add_data('cmdid', data['command_id'])
msg.add_data('cmdparams', data['parameters'])
return cli.request('xplgw', msg.get(), timeout=10).get()
def client_devices_new(client_id):
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('client.detail.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
detaila = res.get_data()
data = detaila[client_id]['data']
else:
data = {}
if type(data["device_types"]) is not dict:
dtypes = {}
else:
dtypes = list(data["device_types"].keys())
products = {}
if "products" in data:
for prod in data["products"]:
products[prod["name"]] = prod["type"]
return render_template('client_device_new.html',
device_types = dtypes,
products = products,
clientid = client_id,
mactive="clients",
active = 'devices'
)
def _mdp_reply_butler_features(self, message):
""" Butler features
"""
msg = MQMessage()
msg.set_action('butler.features.result')
msg.add_data(u"features", self.butler_features)
self.reply(msg.get())
def do_action(self):
self.log.info(u"Command : Do an action...")
# live udate some values
self.log.debug(u"Command : Preprocessing on parameters...")
self.log.debug(u"Command : Parameters before processing : {0}".format(self._params))
params = {}
for key in self._params:
self._params[key] = ucode(self._params[key])
self.log.debug(u"Command : Preprocess for param : key={0}, typeofvalue={1}, value={2}".format(key, type(self._params[key]), self._params[key]))
params[key] = self._params[key]
if key == "color" and params[key].startswith("#"):
self.log.debug(u"- Processing : for a color, if the color starts with #, remove it")
params[key] = params[key][1:]
self.log.debug(u"Command : Parameters after processing : {0}".format(params))
self.log.debug(u"Command : Send action command over MQ...")
# do the command
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('cmd.send')
msg.add_data('cmdid', self._cmdId)
msg.add_data('cmdparams', params)
self.log.debug(u"Command : Command id = '{0}', command params = '{1}'".format(self._cmdId, params))
# do the request
res = cli.request('xplgw', msg.get(), timeout=10)
if res:
data = res.get_data()
if not data['status']:
self.log.error(u"Command : Command sending to XPL gw failed: {0}".format(res))
else:
self.log.error(u"Command : XPL gw did not respond")
self.log.debug(u"Command : Action done")
def __init__(self, log, dbid, name, json, disabled):
""" Create the instance
@param log : A logger instance
@param dbid : The id of this scenario in the db
@param json : The json describing the scenario
"""
self._log = log
self._name = name
self._json = json
self._disabled = disabled
self.zmq = zmq.Context()
# datatypes
self.datatypes = {}
cli = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action('datatype.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'datatypes' in res:
self.datatypes = res['datatypes']
self._parsed_condition = None
self._mapping = { 'test': {}, 'action': {} }
if not self._disabled:
self._instanciate()
def delete_configuration(type, name, host):
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('config.delete')
msg.add_data('type', type)
msg.add_data('host', host)
msg.add_data('name', name)
result = cli.request('dbmgr', msg.get(), timeout=10)
if result:
data = result.get_data()
if 'status' in data:
if not data['status']:
print(result.get())
raise RuntimeError(
"DbMgr did not return status true on a config.set for {0}-{1}.{2} : {3} = {4}"
.format(type, name, host, key, value))
else:
return True
else:
print(result.get())
raise RuntimeError(
"DbMgr did not return a status on a config.set for {0}-{1}.{2} : {3} = {4}"
.format(type, name, host, key, value))
else:
raise RuntimeError(
"Timeout while deleting configuration for {0}-{1}.{2}".format(
type, name, host))
def _mdp_reply_plugin_stop(self, data):
""" Stop the plugin
@param data : MQ req message
First, send the MQ Rep to 'ack' the request
Then, change the plugin status to STATUS_STOP_REQUEST
Then, quit the plugin by calling force_leave(). This should make the plugin send a STATUS_STOPPED if all is ok
Notice that no check is done on the MQ req content : we need nothing in it as it is directly addressed to a plugin
"""
# check if the message is for us
content = data.get_data()
if content['name'] != self._name or content['host'] != self.get_sanitized_hostname():
return
### Send the ack over MQ Rep
msg = MQMessage()
msg.set_action('plugin.stop.result')
status = True
reason = ""
msg.add_data('status', status)
msg.add_data('reason', reason)
msg.add_data('name', self._name)
msg.add_data('host', self.get_sanitized_hostname())
self.log.info("Send reply for the stop request : {0}".format(msg))
self.reply(msg.get())
### Change the plugin status
self._set_status(STATUS_STOP_REQUEST)
### Try to stop the plugin
# if it fails, the manager should try to kill the plugin
self.force_leave()
def delete(self, did):
"""
@api {del} /device/id Delete a device
@apiName delDevice
@apiGroup Device
@apiParam {Number} id The id of the device to be deleted
@apiSuccess {String} none No data is returned
@apiSuccessExample Success-Response:
HTTTP/1.1 200 OK
@apiErrorExample Error-Response:
HTTTP/1.1 500 INTERNAL SERVER ERROR
"""
cli = MQSyncReq(urlHandler.zmq_context)
msg = MQMessage()
msg.set_action('device.delete')
msg.set_data({'did': did})
res = cli.request('dbmgr', msg.get(), timeout=10)
if res is not None:
data = res.get_data()
if data["status"]:
return 201, None
else:
return 500, data["reason"]
else:
return 500, "DbMgr did not respond on the device.create, check the logs"
return 201, None
def _mdp_reply_butler_history(self, message):
""" Butler history
"""
msg = MQMessage()
msg.set_action('butler.history.result')
msg.add_data(u"history", self.history)
self.reply(msg.get())
def on_mdp_request(self, msg):
""" Called when a MQ req/rep message is received
"""
XplPlugin.on_mdp_request(self, msg)
if msg.get_action() == "client.cmd":
print(msg)
reason = None
status = True
data = msg.get_data()
if 'blacklist' in data:
bl = data['blacklist']
else:
reason = u"Invalid command : no blacklist key in message"
status = False
if status == True:
try:
with open(self.blacklist_file, 'ab') as fp_blacklist:
fp_blacklist.write("\n{0};{1}".format("manual blacklisting", bl))
except:
reason = u"Error while completing blacklist file : {0}. Error is : {1}".format(self.blacklist_file, traceback.format_exc())
self.log.error(reason)
status = False
self.load_blacklist()
self.log.info("Reply to command")
reply_msg = MQMessage()
reply_msg.set_action('client.cmd.result')
reply_msg.add_data('status', status)
reply_msg.add_data('reason', reason)
self.reply(reply_msg.get())
if status == True:
thread.start_new_thread(self.open_modems, ())
def client_devices_edit(client_id, did):
with app.db.session_scope():
device = app.db.get_device_sql(did)
MyForm = model_form(Device, \
base_class=Form, \
db_session=app.db.get_session(),
exclude=['params', 'commands', 'sensors', 'address', 'xpl_commands', 'xpl_stats', 'device_type_id', 'client_id', 'client_version'])
form = MyForm(request.form, device)
if request.method == 'POST' and form.validate():
# save it
app.db.update_device(did, \
d_name=request.form['name'], \
d_description=request.form['description'], \
d_reference=request.form['reference'])
# message the suer
flash(gettext("Device saved"), 'success')
# reload stats
req = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action( 'reload' )
resp = req.request('xplgw', msg.get(), 100)
# redirect
return redirect("/client/{0}/dmg_devices/known".format(client_id))
else:
return render_template('client_device_edit.html',
form = form,
clientid = client_id,
mactive="clients",
active = 'devices'
)
def check_config(type, name, host, key, exp_value):
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('config.get')
msg.add_data('type', type)
msg.add_data('host', host)
msg.add_data('name', name)
msg.add_data('key', key)
result = cli.request('dbmgr', msg.get(), timeout=10)
if result:
data = result.get_data()
if 'status' in data:
if not data['status']:
print(result.get())
raise RuntimeError("DbMgr did not return status true on a config.set for {0}-{1}.{2} : {3} = {4}".format(type, name, host, key, value))
else:
if 'value' in data:
if data['value'] != exp_value:
print(result.get())
raise RuntimeError("The returned value is not the expected value for {0}-{1}.{2} : {3} = {4} but received {5}".format(type, name, host, key, exp_value, data['value']))
else:
return True
else:
print(result.get())
raise RuntimeError("DbMgr did not return a value on a config.set for {0}-{1}.{2} : {3} = {4}".format(type, name, host, key, value))
else:
print(result.get())
raise RuntimeError("DbMgr did not return a status on a config.set for {0}-{1}.{2} : {3} = {4}".format(type, name, host, key, value))
else:
raise RuntimeError("Error while setting configuration for {0}-{1}.{2} : {3} = {4}".format(type, name, host, key, value))
def client_devices_known(client_id):
detail = get_client_detail(client_id)
if app.datatypes == {}:
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('datatype.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
app.datatypes = res.get_data()['datatypes']
else:
app.datatypes = {}
# todo : grab from MQ ?
with app.db.session_scope():
devices = app.db.list_devices_by_plugin(client_id)
# sort clients per device type
devices_by_device_type_id = {}
for dev in devices:
if devices_by_device_type_id.has_key(dev['device_type_id']):
devices_by_device_type_id[dev['device_type_id']].append(dev)
else:
devices_by_device_type_id[dev['device_type_id']] = [dev]
return render_template('client_devices.html',
datatypes = app.datatypes,
devices = devices,
devices_by_device_type_id = devices_by_device_type_id,
clientid = client_id,
mactive="clients",
active = 'devices',
rest_url = get_rest_url(),
client_detail = detail
)
def clients():
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('client.list.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
client_list = res.get_data()
else:
client_list = {}
client_list_per_host_per_type = OrderedDict()
for client in client_list:
cli_type = client_list[client]['type']
cli_host = client_list[client]['host']
if not client_list_per_host_per_type.has_key(cli_host):
client_list_per_host_per_type[cli_host] = {}
if not client_list_per_host_per_type[cli_host].has_key(cli_type):
client_list_per_host_per_type[cli_host][cli_type] = {}
client_list_per_host_per_type[cli_host][cli_type][client] = client_list[client]
return render_template('clients.html',
mactive="clients",
overview_state="collapse",
clients=client_list,
client_list_per_host_per_type=client_list_per_host_per_type
)
def __init__(self, log = None, trigger = None):
AbstractParameter.__init__(self, log, trigger)
self.log = log
#self.set_type("string")
#self.add_expected_entry("sensor_id", "integer", "The sensor id to check")
# first, let's get the devices list
try:
cli = MQSyncReq(zmq.Context())
msg = MQMessage()
msg.set_action('device.get')
json_devices = cli.request('dbmgr', msg.get(), timeout=10).get()[1]
devices = json.loads(json_devices)['devices']
print(devices)
sensors_list = []
for dev in devices:
name = dev['name']
for sen_idx in dev['sensors']:
sen_name = dev['sensors'][sen_idx]['name']
sen_id = dev['sensors'][sen_idx]['id']
sensors_list.append(['{0} : {1}'.format(name, sen_name),
'{0}'.format(sen_id)])
print(sensors_list)
except:
self.log.error("Error while getting devices list : {0}".format(traceback.format_exc()))
# then, et's configure our sensor id selector :)
self.set_type("list")
self.add_expected_entry("sensor_id", "list", "The sensor id to check")
#list_sensors = [['sensor1', 'sensor2'], ['a', 'A']]
self.set_list_of_values("sensor_id", sensors_list)
def loadDevices(cls, develop):
logger.info(u"MQ: Loading Devices info")
Device.clean()
msg = MQMessage()
msg.set_action('client.list.get')
res = cli.request('manager', msg.get(), timeout=10)
if res is not None:
_datac = res.get_data()
else:
_datac = {}
session = Session()
for client in _datac.itervalues():
# for each plugin client, we request the list of devices
if client["type"] == "plugin":
msg = MQMessage()
msg.set_action('device.get')
msg.add_data('type', 'plugin')
msg.add_data('name', client["name"])
msg.add_data('host', client["host"])
logger.info(u"MQ: Get devices list for client {0}-{1}.{2}".format("plugin", client["name"], client["host"]))
res = cli.request('dbmgr', msg.get(), timeout=10)
if res is not None:
_datad = res.get_data()
else:
_datad = {}
if 'devices' in _datad:
for device in _datad["devices"]:
logger.info(u"- {0}".format(device["name"]))
d = Device(id=device["id"], name=device["name"], type=device["device_type_id"], reference=device["reference"])
session.add(d)
if "commands" in device:
for ref, command in device["commands"].iteritems():
c = Command(id=command["id"], name=command["name"], device_id=device["id"], reference=ref, return_confirmation=command["return_confirmation"])
session.add(c)
c.datatypes = ""
for param in command["parameters"]:
p = CommandParam(command_id=c.id, key=param["key"], datatype_id=param["data_type"])
session.add(p)
c.datatypes += param["data_type"]
session.add(c)
if "sensors" in device:
for ref, sensor in device["sensors"].iteritems():
s = Sensor(id=sensor["id"], name=sensor["name"], device_id=device["id"], reference=ref, datatype_id=sensor["data_type"], last_value=sensor["last_value"], last_received=sensor["last_received"], timeout=sensor["timeout"])
session.add(s)
session.commit()
session.flush()
def scenario_blocks_actions():
"""
Blockly.Blocks['dom_action_log'] = {
init: function() {
this.setColour(160);
this.appendDummyInput()
.appendField('Log Message')
.appendField(new Blockly.FieldTextInput("<message to log>"), "message");
this.setPreviousStatement(true, "null");
this.setNextStatement(true, "null");
this.setTooltip('');
this.setInputsInline(false);
this.contextMenu = false;
}
};
"""
js = ""
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('action.list')
res = cli.request('scenario', msg.get(), timeout=10)
if res is not None:
res = res.get_data()
if 'result' in res:
res = res['result']
for act, params in res.iteritems():
p = []
jso = ""
for par, parv in params['parameters'].iteritems():
papp = "this.appendDummyInput().appendField('{0}')".format(
parv['description'])
if parv['type'] == 'string':
jso = '{0}, "{1}": "\'+ block.getFieldValue(\'{1}\') + \'" '.format(
jso, par)
papp = "{0}.appendField(new Blockly.FieldTextInput('{1}'), '{2}');".format(
papp, parv['default'], par)
elif parv['type'] == 'integer':
jso = '{0}, "{1}": \'+ block.getFieldValue(\'{1}\') + \' '.format(
jso, par)
papp = "{0}.appendField(new Blockly.FieldTextInput('{1}'), '{2}');".format(
papp, parv['default'], par)
else:
papp = "{0};".format(papp)
p.append(papp)
add = """Blockly.Blocks['{0}'] = {{
init: function() {{
this.setHelpUrl('');
this.setColour(160);
this.appendDummyInput().appendField("{0}");
{1}
this.setPreviousStatement(true, "null");
this.setNextStatement(true, "null");
this.setTooltip('{2}');
this.setInputsInline(false);
}}
}};
""".format(act, '\n'.join(p), params['description'], jso)
js = '{0}\n\r{1}'.format(js, add)
return Response(js, content_type='text/javascript; charset=utf-8')
def reload_stats(self):
self.log.debug(u"=============== reload stats")
req = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action( 'reload' )
resp = req.request('xplgw', msg.get(), 100)
self.log.debug(u"Reply from xplgw: {0}".format(resp))
self.log.debug(u"=============== reload stats END")
def _mdp_reply_helper_help(self, data):
content = data.get_data()
if 'command' in contens.keys():
if content['command'] in self.helpers.keys():
msg = MQMessage()
msg.set_action('helper.help.result')
msg.add_data('help', self.helpers[content['command']]['help'])
self.reply(msg.get())
def _mdp_reply_deviceparam_update_result(self, data):
status = True
reason = False
self.log.debug(u"Updating device param : {0}".format(data))
try:
data = data.get_data()
if 'dpid' in data:
dpid = data['dpid']
val = data['value']
# do the update
res = self._db.udpate_device_param(dpid, value=val)
if not res:
status = False
else:
status = True
else:
status = False
reason = "There is no such device param"
self.log.debug(reason)
# delete done
except DbHelperException as d:
status = False
reason = "Error while updating device param: {0}".format(d.value)
self.log.error(reason)
except:
status = False
reason = "Error while updating device param: {0}".format(
traceback.format_exc())
self.log.error(reason)
# send the result
msg = MQMessage()
msg.set_action('deviceparam.update.result')
msg.add_data('status', status)
if reason:
msg.add_data('reason', reason)
self.log.debug(msg.get())
self.reply(msg.get())
# send the pub message
if status and res:
dev = self._db.get_device(res.device_id)
self._pub.send_event('device.update', {
"device_id": res.device_id,
"client_id": dev['client_id']
})
def _load_client_to_xpl_target(self):
cli = MQSyncReq(self.zmq)
msg = MQMessage()
msg.set_action('client.list.get')
response = cli.request('manager', msg.get(), timeout=10)
if response:
self._parse_xpl_target(response.get_data())
else:
self.log.error(u"Updating client list was not successfull, no response from manager")
def scenario_disable(id):
cli = MQSyncReq(app.zmq_context)
msg = MQMessage()
msg.set_action('scenario.disable')
msg.add_data('cid', id)
res = cli.request('scenario', msg.get(), timeout=10)
flash(gettext(u"Scenario disabled"), u"success")
return redirect(u"/scenario")
pass
