class ValueNodeProperty(NodeProperty):
"""
This class implements the property dialog for value nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
#############################################
# VALUE TAB
#################################
self.datatypeLabel = QtWidgets.QLabel(self)
self.datatypeLabel.setFont(Font('Roboto', 12))
self.datatypeLabel.setText('Datatype')
self.datatypeField = ComboBox(self)
self.datatypeField.setFixedWidth(200)
self.datatypeField.setFocusPolicy(QtCore.Qt.StrongFocus)
self.datatypeField.setFont(Font('Roboto', 12))
for datatype in Datatype:
self.datatypeField.addItem(datatype.value, datatype)
datatype = self.node.datatype
for i in range(self.datatypeField.count()):
if self.datatypeField.itemData(i) is datatype:
self.datatypeField.setCurrentIndex(i)
break
else:
self.datatypeField.setCurrentIndex(0)
self.valueLabel = QtWidgets.QLabel(self)
self.valueLabel.setFont(Font('Roboto', 12))
self.valueLabel.setText('Value')
self.valueField = StringField(self)
self.valueField.setFixedWidth(200)
self.valueField.setFont(Font('Roboto', 12))
self.valueField.setValue(self.node.value)
self.valueWidget = QtWidgets.QWidget()
self.valueLayout = QtWidgets.QFormLayout(self.valueWidget)
self.valueLayout.addRow(self.datatypeLabel, self.datatypeField)
self.valueLayout.addRow(self.valueLabel, self.valueField)
self.mainWidget.addTab(self.valueWidget, 'Datatype')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged(), self.valueChanged()]
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(
self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def valueChanged(self):
"""
Change the value of the node.
:rtype: QUndoCommand
"""
datatype = self.datatypeField.currentData()
value = self.valueField.value()
data = self.node.compose(value, datatype)
if self.node.text() != data:
return CommandLabelChange(self.diagram, self.node,
self.node.text(), data)
return None
class PredicateNodeProperty(NodeProperty):
"""
This class implements the property dialog for predicate nodes.
Note that this dialog window is not used for value-domain nodes even though they are predicate nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
meta = diagram.project.meta(node.type(), node.text())
self.urlLabel = QtWidgets.QLabel(self)
self.urlLabel.setFont(Font('Roboto', 12))
self.urlLabel.setText('URL')
self.urlField = StringField(self)
self.urlField.setFixedWidth(300)
self.urlField.setFont(Font('Roboto', 12))
self.urlField.setValue(meta.get(K_URL, ''))
self.descriptionLabel = QtWidgets.QLabel(self)
self.descriptionLabel.setFont(Font('Roboto', 12))
self.descriptionLabel.setText('Description')
self.descriptionField = TextField(self)
self.descriptionField.setFixedSize(300, 160)
self.descriptionField.setFont(Font('Roboto', 12))
self.descriptionField.setValue(meta.get(K_DESCRIPTION, ''))
self.generalLayout.addRow(self.urlLabel, self.urlField)
self.generalLayout.addRow(self.descriptionLabel, self.descriptionField)
#############################################
# LABEL TAB
#################################
self.textLabel = QtWidgets.QLabel(self)
self.textLabel.setFont(Font('Roboto', 12))
self.textLabel.setText('Text')
self.textField = StringField(self)
self.textField.setFixedWidth(300)
self.textField.setFont(Font('Roboto', 12))
self.textField.setValue(self.node.text())
self.refactorLabel = QtWidgets.QLabel(self)
self.refactorLabel.setFont(Font('Roboto', 12))
self.refactorLabel.setText('Refactor')
self.refactorField = CheckBox(self)
self.refactorField.setFont(Font('Roboto', 12))
self.refactorField.setChecked(False)
if node.type() in {
Item.AttributeNode, Item.ConceptNode, Item.RoleNode
}:
if node.special() is not None:
self.refactorField.setEnabled(False)
self.labelWidget = QtWidgets.QWidget()
self.labelLayout = QtWidgets.QFormLayout(self.labelWidget)
self.labelLayout.addRow(self.textLabel, self.textField)
self.labelLayout.addRow(self.refactorLabel, self.refactorField)
self.mainWidget.addTab(self.labelWidget, 'Label')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged(), self.metaDataChanged()]
commands.extend(self.textChanged())
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(
self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def metaDataChanged(self):
"""
Change the url and description of the node.
:rtype: QUndoCommand
"""
undo = self.diagram.project.meta(self.node.type(), self.node.text())
redo = undo.copy()
redo[K_DESCRIPTION] = self.descriptionField.value()
redo[K_URL] = self.urlField.value()
if redo != undo:
return CommandNodeSetMeta(self.diagram.project, self.node.type(),
self.node.text(), undo, redo)
return None
def textChanged(self):
"""
Change the label of the node.
:rtype: list
"""
data = self.textField.value().strip()
data = data if not isEmpty(data) else self.node.label.template
if self.node.text() != data:
if self.refactorField.isChecked():
item = self.node.type()
name = self.node.text()
project = self.diagram.project
return [
CommandLabelChange(n.diagram, n, n.text(), data)
for n in project.predicates(item, name)
]
return [
CommandLabelChange(self.diagram, self.node, self.node.text(),
data)
]
return [None]
class FacetNodeProperty(NodeProperty):
"""
This class implements the property dialog for facet nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
#############################################
# FACET TAB
#################################
f1 = lambda x: x.type() is Item.InputEdge
f2 = lambda x: x.type() is Item.DatatypeRestrictionNode
f3 = lambda x: x.type() is Item.ValueDomainNode
admissible = [x for x in Facet]
restriction = first(
self.node.outgoingNodes(filter_on_edges=f1, filter_on_nodes=f2))
if restriction:
valuedomain = first(
restriction.incomingNodes(filter_on_edges=f1,
filter_on_nodes=f3))
if valuedomain:
admissible = Facet.forDatatype(valuedomain.datatype)
self.facetLabel = QtWidgets.QLabel(self)
self.facetLabel.setFont(Font('Roboto', 12))
self.facetLabel.setText('Facet')
self.facetField = ComboBox(self)
self.facetField.setFixedWidth(200)
self.facetField.setFocusPolicy(QtCore.Qt.StrongFocus)
self.facetField.setFont(Font('Roboto', 12))
for facet in admissible:
self.facetField.addItem(facet.value, facet)
facet = self.node.facet
for i in range(self.facetField.count()):
if self.facetField.itemData(i) is facet:
self.facetField.setCurrentIndex(i)
break
else:
self.facetField.setCurrentIndex(0)
self.valueLabel = QtWidgets.QLabel(self)
self.valueLabel.setFont(Font('Roboto', 12))
self.valueLabel.setText('Value')
self.valueField = StringField(self)
self.valueField.setFixedWidth(200)
self.valueField.setFont(Font('Roboto', 12))
self.valueField.setValue(self.node.value)
self.facetWidget = QtWidgets.QWidget()
self.facetLayout = QtWidgets.QFormLayout(self.facetWidget)
self.facetLayout.addRow(self.facetLabel, self.facetField)
self.facetLayout.addRow(self.valueLabel, self.valueField)
self.mainWidget.addTab(self.facetWidget, 'Facet')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged(), self.facetChanged()]
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(
self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def facetChanged(self):
"""
Change the facet value of the node of the node.
:rtype: QUndoCommand
"""
data = self.node.compose(self.facetField.currentData(),
self.valueField.value())
if self.node.text() != data:
return CommandLabelChange(self.diagram, self.node,
self.node.text(), data)
return None
class WorkspaceDialog(QtWidgets.QDialog):
"""
This class can be used to setup the workspace path.
"""
def __init__(self, parent=None):
"""
Initialize the workspace dialog.
:type parent: QtWidgets.QWidget
"""
super().__init__(parent)
#############################################
# HEAD AREA
#################################
self.headTitle = QtWidgets.QLabel('Select a workspace', self)
self.headTitle.setFont(Font('Roboto', 12, bold=True))
self.headDescription = QtWidgets.QLabel(dedent("""
{0} stores your projects in a directory called workspace.<br/>
Please choose a workspace directory to use.""".format(APPNAME)), self)
self.headDescription.setFont(Font('Roboto', 12))
self.headPix = QtWidgets.QLabel(self)
self.headPix.setPixmap(QtGui.QIcon(':/icons/128/ic_eddy').pixmap(48))
self.headPix.setContentsMargins(0, 0, 0, 0)
self.headWidget = QtWidgets.QWidget(self)
self.headWidget.setProperty('class', 'head')
self.headWidget.setContentsMargins(10, 10, 10, 10)
self.headLayoutL = QtWidgets.QVBoxLayout()
self.headLayoutL.addWidget(self.headTitle)
self.headLayoutL.addWidget(self.headDescription)
self.headLayoutL.setContentsMargins(0, 0, 0, 0)
self.headLayoutR = QtWidgets.QVBoxLayout()
self.headLayoutR.addWidget(self.headPix, 0, QtCore.Qt.AlignRight)
self.headLayoutR.setContentsMargins(0, 0, 0, 0)
self.headLayoutM = QtWidgets.QHBoxLayout(self.headWidget)
self.headLayoutM.addLayout(self.headLayoutL)
self.headLayoutM.addLayout(self.headLayoutR)
self.headLayoutM.setContentsMargins(0, 0, 0, 0)
#############################################
# EDIT AREA
#################################
self.workspaceField = StringField(self)
self.workspaceField.setFont(Font('Roboto', 12))
self.workspaceField.setFixedWidth(400)
self.workspaceField.setReadOnly(True)
self.workspaceField.setText(expandPath(WORKSPACE))
self.btnBrowse = QtWidgets.QPushButton(self)
self.btnBrowse.setFont(Font('Roboto', 12))
self.btnBrowse.setFixedWidth(30)
self.btnBrowse.setText('...')
self.editLayout = QtWidgets.QHBoxLayout()
self.editLayout.setContentsMargins(10, 10, 10, 10)
self.editLayout.addWidget(self.workspaceField)
self.editLayout.addWidget(self.btnBrowse)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(QtWidgets.QDialogButtonBox.Ok, self)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# SETUP DIALOG LAYOUT
#################################
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.headWidget)
self.mainLayout.addLayout(self.editLayout)
self.mainLayout.addWidget(self.confirmationBox, 0, QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('Configure workspace')
connect(self.btnBrowse.clicked, self.choosePath)
connect(self.confirmationBox.accepted, self.accept)
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Create Eddy workspace (if necessary).
"""
path = self.workspaceField.value()
try:
mkdir(path)
except Exception as e:
msgbox = QtWidgets.QMessageBox(self)
msgbox.setDetailedText(format_exception(e))
msgbox.setIconPixmap(QtGui.QIcon(':/icons/48/ic_error_outline_black').pixmap(48))
msgbox.setStandardButtons(QtWidgets.QMessageBox.Close)
msgbox.setText('{0} could not create the specified workspace: {1}!'.format(APPNAME, path))
msgbox.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
msgbox.setWindowTitle('Workspace setup failed!')
msgbox.exec_()
super().reject()
else:
settings = QtCore.QSettings(ORGANIZATION, APPNAME)
settings.setValue('workspace/home', path)
settings.sync()
super().accept()
@QtCore.pyqtSlot()
def choosePath(self):
"""
Bring up a modal window that allows the user to choose a valid workspace path.
"""
path = self.workspaceField.value()
if not isPathValid(path):
path = expandPath('~')
dialog = QtWidgets.QFileDialog(self)
dialog.setAcceptMode(QtWidgets.QFileDialog.AcceptOpen)
dialog.setDirectory(path)
dialog.setFileMode(QtWidgets.QFileDialog.Directory)
dialog.setOption(QtWidgets.QFileDialog.ShowDirsOnly, True)
dialog.setViewMode(QtWidgets.QFileDialog.Detail)
if dialog.exec_() == QtWidgets.QFileDialog.Accepted:
self.workspaceField.setValue(first(dialog.selectedFiles()))
class NodeProperty(PropertyDialog):
"""
This class implements the 'Node property' dialog.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(session)
self.diagram = diagram
self.node = node
#############################################
# GENERAL TAB
#################################
self.idLabel = QtWidgets.QLabel(self)
self.idLabel.setFont(Font('Roboto', 12))
self.idLabel.setText('ID')
self.idField = StringField(self)
self.idField.setFont(Font('Roboto', 12))
self.idField.setFixedWidth(300)
self.idField.setFocusPolicy(QtCore.Qt.NoFocus)
self.idField.setReadOnly(True)
self.idField.setValue(self.node.id)
self.typeLabel = QtWidgets.QLabel(self)
self.typeLabel.setFont(Font('Roboto', 12))
self.typeLabel.setText('Type')
self.typeField = StringField(self)
self.typeField.setFont(Font('Roboto', 12))
self.typeField.setFocusPolicy(QtCore.Qt.NoFocus)
self.typeField.setFixedWidth(300)
self.typeField.setReadOnly(True)
self.typeField.setValue(node.shortName.capitalize())
self.identityLabel = QtWidgets.QLabel(self)
self.identityLabel.setFont(Font('Roboto', 12))
self.identityLabel.setText('Identity')
self.identityField = StringField(self)
self.identityField.setFont(Font('Roboto', 12))
self.identityField.setFocusPolicy(QtCore.Qt.NoFocus)
self.identityField.setFixedWidth(300)
self.identityField.setReadOnly(True)
self.identityField.setValue(self.node.identityName)
self.neighboursLabel = QtWidgets.QLabel(self)
self.neighboursLabel.setFont(Font('Roboto', 12))
self.neighboursLabel.setText('Neighbours')
self.neighboursField = IntegerField(self)
self.neighboursField.setFont(Font('Roboto', 12))
self.neighboursField.setFocusPolicy(QtCore.Qt.NoFocus)
self.neighboursField.setFixedWidth(300)
self.neighboursField.setReadOnly(True)
self.neighboursField.setValue(len(self.node.adjacentNodes()))
self.generalWidget = QtWidgets.QWidget()
self.generalLayout = QtWidgets.QFormLayout(self.generalWidget)
self.generalLayout.addRow(self.idLabel, self.idField)
self.generalLayout.addRow(self.typeLabel, self.typeField)
self.generalLayout.addRow(self.identityLabel, self.identityField)
self.generalLayout.addRow(self.neighboursLabel, self.neighboursField)
#############################################
# GEOMETRY TAB
#################################
nodePos = self.node.pos()
sceneRect = self.diagram.sceneRect()
self.xLabel = QtWidgets.QLabel(self)
self.xLabel.setFont(Font('Roboto', 12))
self.xLabel.setText('X')
self.xField = SpinBox(self)
self.xField.setFixedWidth(60)
self.xField.setFont(Font('Roboto', 12))
self.xField.setRange(sceneRect.left(), sceneRect.right())
self.xField.setValue(int(nodePos.x()))
self.yLabel = QtWidgets.QLabel(self)
self.yLabel.setFont(Font('Roboto', 12))
self.yLabel.setText('Y')
self.yField = SpinBox(self)
self.yField.setFixedWidth(60)
self.yField.setFont(Font('Roboto', 12))
self.yField.setRange(sceneRect.top(), sceneRect.bottom())
self.yField.setValue(int(nodePos.y()))
self.widthLabel = QtWidgets.QLabel(self)
self.widthLabel.setFont(Font('Roboto', 12))
self.widthLabel.setText('Width')
self.widthField = SpinBox(self)
self.widthField.setFixedWidth(60)
self.widthField.setFont(Font('Roboto', 12))
self.widthField.setRange(20, sceneRect.width())
self.widthField.setReadOnly(True)
self.widthField.setValue(int(self.node.width()))
self.heightLabel = QtWidgets.QLabel(self)
self.heightLabel.setFont(Font('Roboto', 12))
self.heightLabel.setText('Height')
self.heightField = SpinBox(self)
self.heightField.setFixedWidth(60)
self.heightField.setFont(Font('Roboto', 12))
self.heightField.setRange(20, sceneRect.height())
self.heightField.setReadOnly(True)
self.heightField.setValue(int(self.node.height()))
self.geometryWidget = QtWidgets.QWidget()
self.geometryLayout = QtWidgets.QFormLayout(self.geometryWidget)
self.geometryLayout.addRow(self.xLabel, self.xField)
self.geometryLayout.addRow(self.yLabel, self.yField)
self.geometryLayout.addRow(self.widthLabel, self.widthField)
self.geometryLayout.addRow(self.heightLabel, self.heightField)
#############################################
# CONFIRMATION BOX
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(
QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# MAIN WIDGET
#################################
self.mainWidget = QtWidgets.QTabWidget(self)
self.mainWidget.addTab(self.generalWidget, 'General')
self.mainWidget.addTab(self.geometryWidget, 'Geometry')
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.mainWidget)
self.mainLayout.addWidget(self.confirmationBox, 0,
QtCore.Qt.AlignRight)
self.setWindowTitle('Properties: {0}'.format(self.node))
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
connect(self.confirmationBox.accepted, self.complete)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged()]
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(
self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def positionChanged(self):
"""
Move the node properly if the position has been changed.
:rtype: QUndoCommand
"""
rect = self.diagram.sceneRect()
xPos = clamp(self.xField.value(), rect.left(), rect.right())
yPos = clamp(self.yField.value(), rect.top(), rect.bottom())
pos1 = self.node.pos()
pos2 = QtCore.QPointF(xPos, yPos)
if pos1 != pos2:
initData = self.diagram.setupMove([self.node])
moveData = self.diagram.completeMove(initData, pos2 - pos1)
return CommandNodeMove(self.diagram, initData, moveData)
return None
class AbstractDiagramForm(QtWidgets.QDialog):
"""
Base class for diagram dialogs.
"""
__metaclass__ = ABCMeta
def __init__(self, project, parent=None):
"""
Initialize the dialog.
:type project: Project
:type parent: QtWidgets.QWidget
"""
super().__init__(parent)
self.project = project
#############################################
# FORM AREA
#################################
self.nameField = StringField(self)
self.nameField.setFont(Font('Roboto', 12))
self.nameField.setMinimumWidth(400)
self.nameField.setMaxLength(64)
self.nameField.setPlaceholderText('Name...')
connect(self.nameField.textChanged, self.onNameFieldChanged)
self.warnLabel = QtWidgets.QLabel(self)
self.warnLabel.setContentsMargins(0, 0, 0, 0)
self.warnLabel.setProperty('class', 'invalid')
self.warnLabel.setVisible(False)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setFont(Font('Roboto', 12))
self.confirmationBox.button(QtWidgets.QDialogButtonBox.Ok).setEnabled(False)
#############################################
# SETUP DIALOG LAYOUT
#################################
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(10, 10, 10, 10)
self.mainLayout.addWidget(self.nameField)
self.mainLayout.addWidget(self.warnLabel)
self.mainLayout.addWidget(self.confirmationBox, 0, QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot(str)
def onNameFieldChanged(self, name):
"""
Executed when the content of the input field changes.
:type name: str
"""
name = name.strip()
if not name:
caption = ''
enabled = False
else:
for diagram in self.project.diagrams():
if diagram.name.upper() == name.upper():
caption = "Diagram '{0}' already exists!".format(name)
enabled = False
break
else:
caption = ''
enabled = True
self.warnLabel.setText(caption)
self.warnLabel.setVisible(not isEmpty(caption))
self.confirmationBox.button(QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
class RefactorNameForm(QtWidgets.QDialog):
"""
This class implements the form used to rename nodes during refactor operations.
"""
def __init__(self, node, session):
"""
Initialize the form dialog.
:type node: AbstractNode
:type session: Session
"""
super().__init__(session)
self.node = node
#############################################
# FORM AREA
#################################
self.renameLabel = QtWidgets.QLabel(self)
self.renameLabel.setFont(Font('Roboto', 12))
self.renameLabel.setText('IRI label')
self.renameField = StringField(self)
self.renameField.setFixedWidth(200)
self.renameField.setFont(Font('Roboto', 12))
self.renameLabel.setWordWrap(True)
match = RE_VALUE.match(self.node.text())
if match:
self.renameField.setValue(self.node.text())
else:
self.renameField.setValue(self.node.remaining_characters)
#self.old_text = self.node.remaining_characters
self.old_text = self.node.text()
connect(self.renameField.textChanged, self.nameChanged)
self.formWidget = QtWidgets.QWidget(self)
self.formLayout = QtWidgets.QFormLayout(self.formWidget)
self.formLayout.addRow(self.renameLabel, self.renameField)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(
QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# SETUP DIALOG LAYOUT
#################################
self.caption = QtWidgets.QLabel(self)
self.caption.setFont(Font('Roboto', 12))
self.caption.setContentsMargins(8, 0, 8, 0)
self.caption.setProperty('class', 'invalid')
self.caption.setVisible(False)
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.formWidget)
self.mainLayout.addWidget(self.caption)
self.mainLayout.addWidget(self.confirmationBox, 0,
QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('Rename')
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# PROPERTIES
#################################
@property
def project(self):
"""
Returns the reference to the active project.
:rtype: Project
"""
return self.session.project
@property
def session(self):
"""
Returns the reference to the active session (alias for RefactorNameForm.parent()).
:rtype: Session
"""
return self.parent()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Accepts the rename form and perform refactoring.
"""
currentData = self.renameField.value()
if currentData and currentData != self.old_text:
match = RE_VALUE.match(currentData)
match_old = RE_VALUE.match(self.old_text)
commands = []
if match:
new_prefix = match.group(
'datatype')[0:match.group('datatype').index(':')]
new_remaining_characters = match.group(
'datatype')[match.group('datatype').index(':') +
1:len(match.group('datatype'))]
new_iri = None
for std_iri in OWLStandardIRIPrefixPairsDict.std_IRI_prefix_dict.keys(
):
std_prefix = OWLStandardIRIPrefixPairsDict.std_IRI_prefix_dict[
std_iri]
if std_prefix == new_prefix:
new_iri = std_iri
Duplicate_dict_1 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
Duplicate_dict_2 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
old_iri = self.project.get_iri_of_node(self.node)
list_of_nodes_to_process = []
commands_label_change_list_1 = []
commands_label_change_list_2 = []
commands_rc_change = []
for node in self.project.predicates(self.node.type(),
self.node.text()):
list_of_nodes_to_process.append(node)
Duplicate_dict_1[old_iri][1].remove(node)
Duplicate_dict_1[new_iri][1].add(node)
commands_label_change_list_1.append(
CommandLabelChange(node.diagram,
node,
self.old_text,
currentData,
refactor=True))
commands_rc_change.append(
CommandNodeSetRemainingCharacters(
node.remaining_characters,
new_remaining_characters,
node,
self.project,
refactor=True))
commands_label_change_list_2.append(
CommandLabelChange(node.diagram,
node,
self.old_text,
currentData,
refactor=True))
command_dict_change = CommandProjetSetIRIPrefixesNodesDict(
self.project, Duplicate_dict_2, Duplicate_dict_1,
[old_iri, new_iri], list_of_nodes_to_process)
commands.append(
CommandProjectDisconnectSpecificSignals(self.project))
commands.extend(commands_label_change_list_1)
commands.append(command_dict_change)
commands.extend(commands_rc_change)
commands.extend(commands_label_change_list_2)
commands.append(
CommandProjectConnectSpecificSignals(self.project))
else:
#self.setText(self.old_text)
exception_list = ['-', '_', '.', '~', '\n']
currentData_processed = ''
flag = False
for i, c in enumerate(currentData):
# i ranges from 0->len(currentDate)-1 inc.
if c == '':
pass
elif i < (len(currentData) - 1) and (
c == '\\' and currentData[i + 1] == 'n'):
currentData_processed = currentData_processed + '\n'
elif i > 0 and (c == 'n' and currentData[i - 1] == '\\'):
pass
elif (not c.isalnum()) and (c not in exception_list):
currentData_processed = currentData_processed + '_'
flag = True
else:
currentData_processed = currentData_processed + c
if flag is True:
self.session.statusBar().showMessage(
'Spaces in between alphanumeric characters and special characters were replaced by an underscore character.',
15000)
if match_old:
new_remaining_characters = currentData_processed
new_iri = self.project.iri
Duplicate_dict_1 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
Duplicate_dict_2 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
old_iri = self.project.get_iri_of_node(self.node)
list_of_nodes_to_process = []
commands_label_change_list_1 = []
commands_label_change_list_2 = []
commands_rc_change = []
for node in self.project.predicates(
self.node.type(), self.node.text()):
list_of_nodes_to_process.append(node)
Duplicate_dict_1[old_iri][1].remove(node)
Duplicate_dict_1[new_iri][1].add(node)
if len(Duplicate_dict_1[new_iri][0]) == 0:
new_label = self.project.get_full_IRI(
new_iri, None, new_remaining_characters)
else:
new_label = str(Duplicate_dict_1[new_iri][0][
len(Duplicate_dict_1[new_iri][0]) - 1] + ':' +
new_remaining_characters)
commands_label_change_list_1.append(
CommandLabelChange(node.diagram,
node,
self.old_text,
new_label,
refactor=True))
commands_rc_change.append(
CommandNodeSetRemainingCharacters(
node.remaining_characters,
new_remaining_characters,
node,
self.project,
refactor=True))
commands_label_change_list_2.append(
CommandLabelChange(node.diagram,
node,
self.old_text,
new_label,
refactor=True))
command_dict_change = CommandProjetSetIRIPrefixesNodesDict(
self.project, Duplicate_dict_2, Duplicate_dict_1,
[old_iri, new_iri], list_of_nodes_to_process)
commands.append(
CommandProjectDisconnectSpecificSignals(self.project))
commands.extend(commands_label_change_list_1)
commands.append(command_dict_change)
commands.extend(commands_rc_change)
commands.extend(commands_label_change_list_2)
commands.append(
CommandProjectConnectSpecificSignals(self.project))
else:
commands.append(
CommandProjectDisconnectSpecificSignals(self.project))
for node in self.project.predicates(
self.node.type(), self.node.text()):
commands.append(
CommandNodeSetRemainingCharacters(
node.remaining_characters,
currentData_processed,
node,
self.project,
refactor=True))
commands.append(
CommandProjectConnectSpecificSignals(self.project))
if any(commands):
self.session.undostack.beginMacro(
'change predicate "{0}" to "{1}"'.format(
self.node.text(), currentData))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
else:
pass
super().accept()
#not used
@QtCore.pyqtSlot()
def accept_2(self):
"""
Accepts the rename form and perform refactoring.
"""
name = self.renameField.value()
self.session.undostack.beginMacro(
'change predicate "{0}" to "{1}"'.format(self.node.text(), name))
for node in self.project.predicates(self.node.type(),
self.node.text()):
command = CommandLabelChange(node.diagram,
node,
node.text(),
name,
refactor=True)
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
@QtCore.pyqtSlot()
def nameChanged(self):
"""
Executed whenever the text in the rename field changes.
"""
caption = ''
enabled = True
if isEmpty(self.renameField.value()):
caption = "\'{0}\' is not a valid predicate name".format(
self.renameField.value())
enabled = False
self.caption.setText(caption)
self.caption.setVisible(not isEmpty(caption))
self.confirmationBox.button(
QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
class ValueNodeProperty(NodeProperty):
"""
This class implements the property dialog for value nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
#############################################
# VALUE TAB
#################################
self.datatypeLabel = QtWidgets.QLabel(self)
self.datatypeLabel.setFont(Font('Roboto', 12))
self.datatypeLabel.setText('Datatype')
self.datatypeField = ComboBox(self)
self.datatypeField.setFixedWidth(200)
self.datatypeField.setFocusPolicy(QtCore.Qt.StrongFocus)
self.datatypeField.setFont(Font('Roboto', 12))
for datatype in Datatype:
self.datatypeField.addItem(datatype.value, datatype)
datatype = self.node.datatype
for i in range(self.datatypeField.count()):
if self.datatypeField.itemData(i) is datatype:
self.datatypeField.setCurrentIndex(i)
break
else:
self.datatypeField.setCurrentIndex(0)
self.valueLabel = QtWidgets.QLabel(self)
self.valueLabel.setFont(Font('Roboto', 12))
self.valueLabel.setText('Value')
self.valueField = StringField(self)
self.valueField.setFixedWidth(200)
self.valueField.setFont(Font('Roboto', 12))
self.valueField.setValue(self.node.value)
self.valueWidget = QtWidgets.QWidget()
self.valueLayout = QtWidgets.QFormLayout(self.valueWidget)
self.valueLayout.addRow(self.datatypeLabel, self.datatypeField)
self.valueLayout.addRow(self.valueLabel, self.valueField)
self.mainWidget.addTab(self.valueWidget, 'Datatype')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged(), self.valueChanged()]
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def valueChanged(self):
"""
Change the value of the node.
:rtype: QUndoCommand
"""
datatype = self.datatypeField.currentData()
value = self.valueField.value()
data = self.node.compose(value, datatype)
if self.node.text() != data:
return CommandLabelChange(self.diagram, self.node, self.node.text(), data)
return None
class ProjectDialog(QtWidgets.QDialog):
"""
This class is used to display a modal window to enter project specific data.
"""
def __init__(self, parent=None):
"""
Initialize the project dialog.
:type parent: QtWidgets.QWidget
"""
super().__init__(parent)
#############################################
# FORM AREA
#################################
settings = QtCore.QSettings(ORGANIZATION, APPNAME)
self.workspace = expandPath(settings.value('workspace/home', WORKSPACE, str))
self.workspace = '{0}{1}'.format(rstrip(self.workspace, os.path.sep), os.path.sep)
self.nameLabel = QtWidgets.QLabel(self)
self.nameLabel.setFont(Font('Roboto', 12))
self.nameLabel.setText('Name')
self.nameField = StringField(self)
self.nameField.setFont(Font('Roboto', 12))
self.nameField.setMinimumWidth(400)
self.nameField.setMaxLength(64)
connect(self.nameField.textChanged, self.onNameFieldChanged)
self.prefixLabel = QtWidgets.QLabel(self)
self.prefixLabel.setFont(Font('Roboto', 12))
self.prefixLabel.setText('Prefix')
self.prefixField = StringField(self)
self.prefixField.setFont(Font('Roboto', 12))
self.prefixField.setMinimumWidth(400)
self.iriLabel = QtWidgets.QLabel(self)
self.iriLabel.setFont(Font('Roboto', 12))
self.iriLabel.setText('IRI')
self.iriField = StringField(self)
self.iriField.setFont(Font('Roboto', 12))
self.iriField.setMinimumWidth(400)
connect(self.iriField.textChanged, self.doProjectPathValidate)
connect(self.nameField.textChanged, self.doProjectPathValidate)
connect(self.prefixField.textChanged, self.doProjectPathValidate)
self.pathLabel = QtWidgets.QLabel(self)
self.pathLabel.setFont(Font('Roboto', 12))
self.pathLabel.setText('Location')
self.pathField = StringField(self)
self.pathField.setFont(Font('Roboto', 12))
self.pathField.setMinimumWidth(400)
self.pathField.setReadOnly(True)
self.pathField.setFocusPolicy(QtCore.Qt.NoFocus)
self.pathField.setValue(self.workspace)
spacer = QtWidgets.QFrame()
spacer.setFrameShape(QtWidgets.QFrame.HLine)
spacer.setFrameShadow(QtWidgets.QFrame.Sunken)
self.formWidget = QtWidgets.QWidget(self)
self.formLayout = QtWidgets.QFormLayout(self.formWidget)
self.formLayout.addRow(self.nameLabel, self.nameField)
self.formLayout.addRow(self.prefixLabel, self.prefixField)
self.formLayout.addRow(self.iriLabel, self.iriField)
self.formLayout.addWidget(spacer)
self.formLayout.addRow(self.pathLabel, self.pathField)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
self.confirmationBox.button(QtWidgets.QDialogButtonBox.Ok).setEnabled(False)
#############################################
# SETUP DIALOG LAYOUT
#################################
self.caption = QtWidgets.QLabel(self)
self.caption.setFont(Font('Roboto', 12))
self.caption.setContentsMargins(8, 0, 8, 0)
self.caption.setProperty('class', 'invalid')
self.caption.setVisible(False)
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.formWidget)
self.mainLayout.addWidget(self.caption)
self.mainLayout.addWidget(self.confirmationBox, 0, QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('New project')
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# INTERFACE
#################################
def iri(self):
"""
Returns the value of the iri field (trimmed).
:rtype: str
"""
return self.iriField.value()
def path(self):
"""
Returns the value of the path field (expanded).
:rtype: str
"""
return expandPath(self.pathField.value())
def prefix(self):
"""
Returns the value of the prefix field (trimmed).
:rtype: str
"""
return self.prefixField.value()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Accept the project form and creates a new empty project.
"""
project = Project(self.path(), self.prefix(), self.iri(), OWL2Profile())
worker = GrapholProjectExporter(project)
worker.run()
super().accept()
@QtCore.pyqtSlot()
def doProjectPathValidate(self):
"""
Validate project settings.
"""
caption = ''
enabled = True
#############################################
# CHECK NAME
#################################
name = self.nameField.value()
path = self.pathField.value()
if not name:
caption = ''
enabled = False
else:
if isdir(path):
caption = "Project '{0}' already exists!".format(name)
enabled = False
elif not isPathValid(path):
caption = "'{0}' is not a valid project name!".format(name)
enabled = False
#############################################
# CHECK PREFIX
#################################
if enabled:
if not self.prefixField.value():
caption = ''
enabled = False
#############################################
# CHECK IRI
#################################
if enabled:
if not self.iriField.value():
caption = ''
enabled = False
self.caption.setText(caption)
self.caption.setVisible(not isEmpty(caption))
self.confirmationBox.button(QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
@QtCore.pyqtSlot(str)
def onNameFieldChanged(self, name):
"""
Update the project location field to reflect the new project name.
:type name: str
"""
self.pathField.setValue('{0}{1}'.format(self.workspace, name.strip()))
class PredicateNodeProperty(NodeProperty):
"""
This class implements the property dialog for predicate nodes.
Note that this dialog window is not used for value-domain nodes even though they are predicate nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
meta = diagram.project.meta(node.type(), node.text())
self.urlLabel = QtWidgets.QLabel(self)
self.urlLabel.setFont(Font('Roboto', 12))
self.urlLabel.setText('URL')
self.urlField = StringField(self)
self.urlField.setFixedWidth(300)
self.urlField.setFont(Font('Roboto', 12))
self.urlField.setValue(meta.get('url', ''))
self.descriptionLabel = QtWidgets.QLabel(self)
self.descriptionLabel.setFont(Font('Roboto', 12))
self.descriptionLabel.setText('Description')
self.descriptionField = TextField(self)
self.descriptionField.setFixedSize(300, 160)
self.descriptionField.setFont(Font('Roboto', 12))
self.descriptionField.setValue(meta.get('description', ''))
self.generalLayout.addRow(self.urlLabel, self.urlField)
self.generalLayout.addRow(self.descriptionLabel, self.descriptionField)
#############################################
# LABEL TAB
#################################
self.textLabel = QtWidgets.QLabel(self)
self.textLabel.setFont(Font('Roboto', 12))
self.textLabel.setText('Text')
self.textField = StringField(self)
self.textField.setFixedWidth(300)
self.textField.setFont(Font('Roboto', 12))
self.textField.setValue(self.node.text())
self.refactorLabel = QtWidgets.QLabel(self)
self.refactorLabel.setFont(Font('Roboto', 12))
self.refactorLabel.setText('Refactor')
self.refactorField = CheckBox(self)
self.refactorField.setFont(Font('Roboto', 12))
self.refactorField.setChecked(False)
if node.type() in {Item.AttributeNode, Item.ConceptNode, Item.RoleNode}:
if node.special() is not None:
self.refactorField.setEnabled(False)
self.labelWidget = QtWidgets.QWidget()
self.labelLayout = QtWidgets.QFormLayout(self.labelWidget)
self.labelLayout.addRow(self.textLabel, self.textField)
self.labelLayout.addRow(self.refactorLabel, self.refactorField)
self.mainWidget.addTab(self.labelWidget, 'Label')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged(), self.metaDataChanged()]
commands.extend(self.textChanged())
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def metaDataChanged(self):
"""
Change the url and description of the node.
:rtype: QUndoCommand
"""
meta = self.diagram.project.meta(self.node.type(), self.node.text())
copy = meta.copy()
copy['description'] = self.descriptionField.value()
copy['url'] = self.urlField.value()
if copy != meta:
return CommandNodeChangeMeta(self.diagram, self.node, meta, copy)
return None
def textChanged(self):
"""
Change the label of the node.
:rtype: list
"""
data = self.textField.value().strip()
data = data if not isEmpty(data) else self.node.label.template
if self.node.text() != data:
if self.refactorField.isChecked():
item = self.node.type()
name = self.node.text()
project = self.diagram.project
return [CommandLabelChange(n.diagram, n, n.text(), data) for n in project.predicates(item, name)]
return [CommandLabelChange(self.diagram, self.node, self.node.text(), data)]
return [None]
class FacetNodeProperty(NodeProperty):
"""
This class implements the property dialog for facet nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
#############################################
# FACET TAB
#################################
f1 = lambda x: x.type() is Item.InputEdge
f2 = lambda x: x.type() is Item.DatatypeRestrictionNode
f3 = lambda x: x.type() is Item.ValueDomainNode
admissible = [x for x in Facet]
restriction = first(self.node.outgoingNodes(filter_on_edges=f1, filter_on_nodes=f2))
if restriction:
valuedomain = first(restriction.incomingNodes(filter_on_edges=f1, filter_on_nodes=f3))
if valuedomain:
admissible = Facet.forDatatype(valuedomain.datatype)
self.facetLabel = QtWidgets.QLabel(self)
self.facetLabel.setFont(Font('Roboto', 12))
self.facetLabel.setText('Facet')
self.facetField = ComboBox(self)
self.facetField.setFixedWidth(200)
self.facetField.setFocusPolicy(QtCore.Qt.StrongFocus)
self.facetField.setFont(Font('Roboto', 12))
for facet in admissible:
self.facetField.addItem(facet.value, facet)
facet = self.node.facet
for i in range(self.facetField.count()):
if self.facetField.itemData(i) is facet:
self.facetField.setCurrentIndex(i)
break
else:
self.facetField.setCurrentIndex(0)
self.valueLabel = QtWidgets.QLabel(self)
self.valueLabel.setFont(Font('Roboto', 12))
self.valueLabel.setText('Value')
self.valueField = StringField(self)
self.valueField.setFixedWidth(200)
self.valueField.setFont(Font('Roboto', 12))
self.valueField.setValue(self.node.value)
self.facetWidget = QtWidgets.QWidget()
self.facetLayout = QtWidgets.QFormLayout(self.facetWidget)
self.facetLayout.addRow(self.facetLabel, self.facetField)
self.facetLayout.addRow(self.valueLabel, self.valueField)
self.mainWidget.addTab(self.facetWidget, 'Facet')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged(), self.facetChanged()]
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def facetChanged(self):
"""
Change the facet value of the node of the node.
:rtype: QUndoCommand
"""
data = self.node.compose(self.facetField.currentData(), self.valueField.value())
if self.node.text() != data:
return CommandLabelChange(self.diagram, self.node, self.node.text(), data)
return None
class NodeProperty(PropertyDialog):
"""
This class implements the 'Node property' dialog.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(session)
self.diagram = diagram
self.node = node
#############################################
# GENERAL TAB
#################################
self.idLabel = QtWidgets.QLabel(self)
self.idLabel.setFont(Font('Roboto', 12))
self.idLabel.setText('ID')
self.idField = StringField(self)
self.idField.setFont(Font('Roboto', 12))
self.idField.setFixedWidth(300)
self.idField.setFocusPolicy(QtCore.Qt.NoFocus)
self.idField.setReadOnly(True)
self.idField.setValue(self.node.id)
self.typeLabel = QtWidgets.QLabel(self)
self.typeLabel.setFont(Font('Roboto', 12))
self.typeLabel.setText('Type')
self.typeField = StringField(self)
self.typeField.setFont(Font('Roboto', 12))
self.typeField.setFocusPolicy(QtCore.Qt.NoFocus)
self.typeField.setFixedWidth(300)
self.typeField.setReadOnly(True)
self.typeField.setValue(node.shortName.capitalize())
self.identityLabel = QtWidgets.QLabel(self)
self.identityLabel.setFont(Font('Roboto', 12))
self.identityLabel.setText('Identity')
self.identityField = StringField(self)
self.identityField.setFont(Font('Roboto', 12))
self.identityField.setFocusPolicy(QtCore.Qt.NoFocus)
self.identityField.setFixedWidth(300)
self.identityField.setReadOnly(True)
self.identityField.setValue(self.node.identityName)
self.neighboursLabel = QtWidgets.QLabel(self)
self.neighboursLabel.setFont(Font('Roboto', 12))
self.neighboursLabel.setText('Neighbours')
self.neighboursField = IntegerField(self)
self.neighboursField.setFont(Font('Roboto', 12))
self.neighboursField.setFocusPolicy(QtCore.Qt.NoFocus)
self.neighboursField.setFixedWidth(300)
self.neighboursField.setReadOnly(True)
self.neighboursField.setValue(len(self.node.adjacentNodes()))
self.generalWidget = QtWidgets.QWidget()
self.generalLayout = QtWidgets.QFormLayout(self.generalWidget)
self.generalLayout.addRow(self.idLabel, self.idField)
self.generalLayout.addRow(self.typeLabel, self.typeField)
self.generalLayout.addRow(self.identityLabel, self.identityField)
self.generalLayout.addRow(self.neighboursLabel, self.neighboursField)
#############################################
# GEOMETRY TAB
#################################
nodePos = self.node.pos()
sceneRect = self.diagram.sceneRect()
self.xLabel = QtWidgets.QLabel(self)
self.xLabel.setFont(Font('Roboto', 12))
self.xLabel.setText('X')
self.xField = SpinBox(self)
self.xField.setFixedWidth(60)
self.xField.setFont(Font('Roboto', 12))
self.xField.setRange(sceneRect.left(), sceneRect.right())
self.xField.setValue(int(nodePos.x()))
self.yLabel = QtWidgets.QLabel(self)
self.yLabel.setFont(Font('Roboto', 12))
self.yLabel.setText('Y')
self.yField = SpinBox(self)
self.yField.setFixedWidth(60)
self.yField.setFont(Font('Roboto', 12))
self.yField.setRange(sceneRect.top(), sceneRect.bottom())
self.yField.setValue(int(nodePos.y()))
self.widthLabel = QtWidgets.QLabel(self)
self.widthLabel.setFont(Font('Roboto', 12))
self.widthLabel.setText('Width')
self.widthField = SpinBox(self)
self.widthField.setFixedWidth(60)
self.widthField.setFont(Font('Roboto', 12))
self.widthField.setRange(20, sceneRect.width())
self.widthField.setReadOnly(True)
self.widthField.setValue(int(self.node.width()))
self.heightLabel = QtWidgets.QLabel(self)
self.heightLabel.setFont(Font('Roboto', 12))
self.heightLabel.setText('Height')
self.heightField = SpinBox(self)
self.heightField.setFixedWidth(60)
self.heightField.setFont(Font('Roboto', 12))
self.heightField.setRange(20, sceneRect.height())
self.heightField.setReadOnly(True)
self.heightField.setValue(int(self.node.height()))
self.geometryWidget = QtWidgets.QWidget()
self.geometryLayout = QtWidgets.QFormLayout(self.geometryWidget)
self.geometryLayout.addRow(self.xLabel, self.xField)
self.geometryLayout.addRow(self.yLabel, self.yField)
self.geometryLayout.addRow(self.widthLabel, self.widthField)
self.geometryLayout.addRow(self.heightLabel, self.heightField)
#############################################
# CONFIRMATION BOX
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# MAIN WIDGET
#################################
self.mainWidget = QtWidgets.QTabWidget(self)
self.mainWidget.addTab(self.generalWidget, 'General')
self.mainWidget.addTab(self.geometryWidget, 'Geometry')
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.mainWidget)
self.mainLayout.addWidget(self.confirmationBox, 0, QtCore.Qt.AlignRight)
self.setWindowTitle('Properties: {0}'.format(self.node))
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
connect(self.confirmationBox.accepted, self.complete)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged()]
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def positionChanged(self):
"""
Move the node properly if the position has been changed.
:rtype: QUndoCommand
"""
rect = self.diagram.sceneRect()
xPos = clamp(self.xField.value(), rect.left(), rect.right())
yPos = clamp(self.yField.value(), rect.top(), rect.bottom())
pos1 = self.node.pos()
pos2 = QtCore.QPointF(xPos, yPos)
if pos1 != pos2:
node = self.node
data = {
'redo': {
'nodes': {node: {'anchors': {k: v + pos2 - pos1 for k, v in node.anchors.items()}, 'pos': pos2}},
'edges': {},
},
'undo': {
'nodes': {node: {'anchors': {k: v for k, v in node.anchors.items()}, 'pos': pos1}},
'edges': {}
}
}
return CommandNodeMove(self.diagram, data)
return None
class AbstractDiagramForm(QtWidgets.QDialog):
"""
Base class for diagram dialogs.
"""
__metaclass__ = ABCMeta
def __init__(self, project, parent=None):
"""
Initialize the dialog.
:type project: Project
:type parent: QtWidgets.QWidget
"""
super().__init__(parent)
self.project = project
#############################################
# FORM AREA
#################################
self.nameField = StringField(self)
self.nameField.setFont(Font('Roboto', 12))
self.nameField.setMinimumWidth(400)
self.nameField.setMaxLength(64)
self.nameField.setPlaceholderText('Name...')
connect(self.nameField.textChanged, self.onNameFieldChanged)
self.warnLabel = QtWidgets.QLabel(self)
self.warnLabel.setContentsMargins(0, 0, 0, 0)
self.warnLabel.setProperty('class', 'invalid')
self.warnLabel.setVisible(False)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(
QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setFont(Font('Roboto', 12))
self.confirmationBox.button(
QtWidgets.QDialogButtonBox.Ok).setEnabled(False)
#############################################
# SETUP DIALOG LAYOUT
#################################
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(10, 10, 10, 10)
self.mainLayout.addWidget(self.nameField)
self.mainLayout.addWidget(self.warnLabel)
self.mainLayout.addWidget(self.confirmationBox, 0,
QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot(str)
def onNameFieldChanged(self, name):
"""
Executed when the content of the input field changes.
:type name: str
"""
name = name.strip()
if not name:
caption = ''
enabled = False
else:
for diagram in self.project.diagrams():
if diagram.name.upper() == name.upper():
caption = "Diagram '{0}' already exists!".format(name)
enabled = False
break
else:
caption = ''
enabled = True
self.warnLabel.setText(caption)
self.warnLabel.setVisible(not isEmpty(caption))
self.confirmationBox.button(
QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
class RefactorNameForm(QtWidgets.QDialog):
"""
This class implements the form used to rename nodes during refactor operations.
"""
def __init__(self, node, session):
"""
Initialize the form dialog.
:type node: AbstractNode
:type session: Session
"""
super().__init__(session)
self.node = node
#############################################
# FORM AREA
#################################
self.renameLabel = QtWidgets.QLabel(self)
self.renameLabel.setFont(Font('Roboto', 12))
self.renameLabel.setText('Name')
self.renameField = StringField(self)
self.renameField.setFixedWidth(200)
self.renameField.setFont(Font('Roboto', 12))
self.renameField.setValue(self.node.text())
connect(self.renameField.textChanged, self.nameChanged)
self.formWidget = QtWidgets.QWidget(self)
self.formLayout = QtWidgets.QFormLayout(self.formWidget)
self.formLayout.addRow(self.renameLabel, self.renameField)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(
QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# SETUP DIALOG LAYOUT
#################################
self.caption = QtWidgets.QLabel(self)
self.caption.setFont(Font('Roboto', 12))
self.caption.setContentsMargins(8, 0, 8, 0)
self.caption.setProperty('class', 'invalid')
self.caption.setVisible(False)
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.formWidget)
self.mainLayout.addWidget(self.caption)
self.mainLayout.addWidget(self.confirmationBox, 0,
QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('Rename')
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# PROPERTIES
#################################
@property
def project(self):
"""
Returns the reference to the active project.
:rtype: Project
"""
return self.session.project
@property
def session(self):
"""
Returns the reference to the active session (alias for RefactorNameForm.parent()).
:rtype: Session
"""
return self.parent()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Accepts the rename form and perform refactoring.
"""
name = self.renameField.value()
self.session.undostack.beginMacro(
'change predicate "{0}" to "{1}"'.format(self.node.text(), name))
for node in self.project.predicates(self.node.type(),
self.node.text()):
command = CommandLabelChange(node.diagram,
node,
node.text(),
name,
refactor=True)
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
@QtCore.pyqtSlot()
def nameChanged(self):
"""
Executed whenever the text in the rename field changes.
"""
caption = ''
enabled = True
if isEmpty(self.renameField.value()):
caption = "\'{0}\' is not a valid predicate name".format(
self.renameField.value())
enabled = False
self.caption.setText(caption)
self.caption.setVisible(not isEmpty(caption))
self.confirmationBox.button(
QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
class NewProjectDialog(QtWidgets.QDialog):
"""
This class is used to display a modal window to enter new project specific data.
"""
def __init__(self, parent=None):
"""
Initialize the project dialog.
:type parent: QWidget
"""
super().__init__(parent)
#############################################
# FORM AREA
#################################
settings = QtCore.QSettings(ORGANIZATION, APPNAME)
self.workspace = expandPath(
settings.value('workspace/home', WORKSPACE, str))
self.workspace = '{0}{1}'.format(rstrip(self.workspace, os.path.sep),
os.path.sep)
self.nameLabel = QtWidgets.QLabel(self)
self.nameLabel.setFont(Font('Roboto', 12))
self.nameLabel.setText('Name')
self.nameField = StringField(self)
self.nameField.setFont(Font('Roboto', 12))
self.nameField.setMinimumWidth(400)
self.nameField.setMaxLength(64)
self.prefixLabel = QtWidgets.QLabel(self)
self.prefixLabel.setFont(Font('Roboto', 12))
self.prefixLabel.setText('Prefix')
self.prefixField = StringField(self)
self.prefixField.setFont(Font('Roboto', 12))
self.prefixField.setMinimumWidth(400)
self.iriLabel = QtWidgets.QLabel(self)
self.iriLabel.setFont(Font('Roboto', 12))
self.iriLabel.setText('IRI')
self.iriField = StringField(self)
self.iriField.setFont(Font('Roboto', 12))
self.iriField.setMinimumWidth(400)
connect(self.prefixField.textChanged, self.doAcceptForm)
connect(self.iriField.textChanged, self.doAcceptForm)
connect(self.nameField.textChanged, self.doAcceptForm)
connect(self.nameField.textChanged, self.onNameFieldChanged)
self.pathLabel = QtWidgets.QLabel(self)
self.pathLabel.setFont(Font('Roboto', 12))
self.pathLabel.setText('Location')
self.pathField = StringField(self)
self.pathField.setFont(Font('Roboto', 12))
self.pathField.setMinimumWidth(400)
self.pathField.setReadOnly(True)
self.pathField.setFocusPolicy(QtCore.Qt.NoFocus)
self.pathField.setValue(self.workspace)
spacer = QtWidgets.QFrame()
spacer.setFrameShape(QtWidgets.QFrame.HLine)
spacer.setFrameShadow(QtWidgets.QFrame.Sunken)
self.formWidget = QtWidgets.QWidget(self)
self.formLayout = QtWidgets.QFormLayout(self.formWidget)
self.formLayout.addRow(self.nameLabel, self.nameField)
self.formLayout.addRow(self.prefixLabel, self.prefixField)
self.formLayout.addRow(self.iriLabel, self.iriField)
self.formLayout.addWidget(spacer)
self.formLayout.addRow(self.pathLabel, self.pathField)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(
QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
self.confirmationBox.button(
QtWidgets.QDialogButtonBox.Ok).setEnabled(False)
#############################################
# SETUP DIALOG LAYOUT
#################################
self.caption = QtWidgets.QLabel(self)
self.caption.setFont(Font('Roboto', 12))
self.caption.setContentsMargins(8, 0, 8, 0)
self.caption.setProperty('class', 'invalid')
self.caption.setVisible(False)
self.gridLayout = QtWidgets.QVBoxLayout(self)
self.gridLayout.setContentsMargins(0, 0, 0, 0)
self.gridLayout.addWidget(self.formWidget)
self.gridLayout.addWidget(self.caption)
self.gridLayout.addWidget(self.confirmationBox, 0,
QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('New project')
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# INTERFACE
#################################
def iri(self):
"""
Returns the value of the iri field (trimmed).
:rtype: str
"""
return self.iriField.value()
def name(self):
"""
Returns the value of the name field (trimmed).
:rtype: str
"""
return self.nameField.value()
def path(self):
"""
Returns the value of the path field (expanded).
:rtype: str
"""
return expandPath(self.pathField.value())
def prefix(self):
"""
Returns the value of the prefix field (trimmed).
:rtype: str
"""
return self.prefixField.value()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Accept the project form and creates a new empty project.
"""
project = Project(name=self.name(),
path=self.path(),
prefix=self.prefix(),
iri=self.iri(),
profile=OWL2Profile())
worker = GrapholProjectExporter(project)
worker.run()
super().accept()
@QtCore.pyqtSlot()
def doAcceptForm(self):
"""
Validate project settings.
"""
caption = ''
enabled = True
#############################################
# CHECK NAME
#################################
if not self.name():
caption = ''
enabled = False
else:
if isdir(self.path()):
caption = "Project '{0}' already exists!".format(self.name())
enabled = False
elif not isPathValid(self.path()):
caption = "'{0}' is not a valid project name!".format(
self.name())
enabled = False
#############################################
# CHECK PREFIX
#################################
if enabled:
if not self.prefix():
caption = ''
enabled = False
#############################################
# CHECK IRI
#################################
if enabled:
if not self.iri():
caption = ''
enabled = False
self.caption.setText(caption)
self.caption.setVisible(not isEmpty(caption))
self.confirmationBox.button(
QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
@QtCore.pyqtSlot(str)
def onNameFieldChanged(self, name):
"""
Update the project location field to reflect the new project name.
:type name: str
"""
self.pathField.setValue('{0}{1}'.format(self.workspace, name.strip()))
class ValueNodeProperty(NodeProperty):
"""
This class implements the property dialog for value nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
self.node = node
#############################################
# VALUE TAB
#################################
self.datatypeLabel = QtWidgets.QLabel(self)
self.datatypeLabel.setFont(Font('Roboto', 12))
self.datatypeLabel.setText('Datatype')
self.datatypeField = ComboBox(self)
self.datatypeField.setFixedWidth(200)
self.datatypeField.setFocusPolicy(QtCore.Qt.StrongFocus)
self.datatypeField.setFont(Font('Roboto', 12))
for datatype in Datatype:
self.datatypeField.addItem(datatype.value, datatype)
datatype = self.node.datatype
for i in range(self.datatypeField.count()):
if self.datatypeField.itemData(i) is datatype:
self.datatypeField.setCurrentIndex(i)
break
else:
self.datatypeField.setCurrentIndex(0)
self.valueLabel = QtWidgets.QLabel(self)
self.valueLabel.setFont(Font('Roboto', 12))
self.valueLabel.setText('Value')
self.valueField = StringField(self)
self.valueField.setFixedWidth(200)
self.valueField.setFont(Font('Roboto', 12))
self.valueField.setValue(self.node.value)
self.valueWidget = QtWidgets.QWidget()
self.valueLayout = QtWidgets.QFormLayout(self.valueWidget)
self.valueLayout.addRow(self.datatypeLabel, self.datatypeField)
self.valueLayout.addRow(self.valueLabel, self.valueField)
self.mainWidget.addTab(self.valueWidget, 'Datatype')
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged()]
commands_value_changed = self.valueChanged()
if commands_value_changed is not None:
commands.extend(commands_value_changed)
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(
self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def valueChanged(self):
"""
Change the value of the node.
:rtype: QUndoCommand
"""
datatype = self.datatypeField.currentData()
value = self.valueField.value()
data = self.node.compose(value, datatype)
if self.node.text() != data:
new_prefix = datatype.value[0:datatype.value.index(':')]
new_remaining_characters = datatype.value[datatype.value.index(':'
) +
1:len(datatype.value)]
new_iri = None
for std_iri in OWLStandardIRIPrefixPairsDict.std_IRI_prefix_dict.keys(
):
std_prefix = OWLStandardIRIPrefixPairsDict.std_IRI_prefix_dict[
std_iri]
if std_prefix == new_prefix:
new_iri = std_iri
Duplicate_dict_1 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
Duplicate_dict_2 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
old_iri = self.project.get_iri_of_node(self.node)
Duplicate_dict_1[old_iri][1].remove(self.node)
Duplicate_dict_1[new_iri][1].add(self.node)
commands = []
commands.append(
CommandLabelChange(self.diagram, self.node, self.node.text(),
data))
commands.append(
CommandProjetSetIRIPrefixesNodesDict(self.project,
Duplicate_dict_2,
Duplicate_dict_1,
[old_iri, new_iri],
[self.node]))
commands.append(CommandNodeSetRemainingCharacters(self.node.remaining_characters,\
new_remaining_characters,self.node,self.project))
commands.append(
CommandLabelChange(self.diagram, self.node, self.node.text(),
data))
return commands
return None
class RefactorNameForm(QtWidgets.QDialog):
"""
This class implements the form used to rename nodes during refactor operations.
"""
def __init__(self, node, session):
"""
Initialize the form dialog.
:type node: AbstractNode
:type session: Session
"""
super().__init__(session)
self.node = node
#############################################
# FORM AREA
#################################
self.renameLabel = QtWidgets.QLabel(self)
self.renameLabel.setFont(Font('Roboto', 12))
self.renameLabel.setText('Name')
self.renameField = StringField(self)
self.renameField.setFixedWidth(200)
self.renameField.setFont(Font('Roboto', 12))
self.renameField.setValue(self.node.text())
connect(self.renameField.textChanged, self.nameChanged)
self.formWidget = QtWidgets.QWidget(self)
self.formLayout = QtWidgets.QFormLayout(self.formWidget)
self.formLayout.addRow(self.renameLabel, self.renameField)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(QtCore.Qt.Horizontal, self)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Ok)
self.confirmationBox.addButton(QtWidgets.QDialogButtonBox.Cancel)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# SETUP DIALOG LAYOUT
#################################
self.caption = QtWidgets.QLabel(self)
self.caption.setFont(Font('Roboto', 12))
self.caption.setContentsMargins(8, 0, 8, 0)
self.caption.setProperty('class', 'invalid')
self.caption.setVisible(False)
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.formWidget)
self.mainLayout.addWidget(self.caption)
self.mainLayout.addWidget(self.confirmationBox, 0, QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('Rename')
connect(self.confirmationBox.accepted, self.accept)
connect(self.confirmationBox.rejected, self.reject)
#############################################
# PROPERTIES
#################################
@property
def project(self):
"""
Returns the reference to the active project.
:rtype: Project
"""
return self.session.project
@property
def session(self):
"""
Returns the reference to the active session (alias for RefactorNameForm.parent()).
:rtype: Session
"""
return self.parent()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Accepts the rename form and perform refactoring.
"""
name = self.renameField.value()
self.session.undostack.beginMacro('change predicate "{0}" to "{1}"'.format(self.node.text(), name))
for node in self.project.predicates(self.node.type(), self.node.text()):
command = CommandLabelChange(node.diagram, node, node.text(), name, refactor=True)
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
@QtCore.pyqtSlot()
def nameChanged(self):
"""
Executed whenever the text in the rename field changes.
"""
caption = ''
enabled = True
if isEmpty(self.renameField.value()):
caption = "\'{0}\' is not a valid predicate name".format(self.renameField.value())
enabled = False
self.caption.setText(caption)
self.caption.setVisible(not isEmpty(caption))
self.confirmationBox.button(QtWidgets.QDialogButtonBox.Ok).setEnabled(enabled)
self.setFixedSize(self.sizeHint())
class PredicateNodeProperty(NodeProperty):
"""
This class implements the property dialog for predicate nodes.
Note that this dialog window is not used for value-domain nodes even though they are predicate nodes.
"""
def __init__(self, diagram, node, session):
"""
Initialize the node properties dialog.
:type diagram: Diagram
:type node: AbstractNode
:type session: Session
"""
super().__init__(diagram, node, session)
meta = diagram.project.meta(node.type(), node.text())
self.iriLabel = QtWidgets.QLabel(self)
self.iriLabel.setFont(Font('Roboto', 12))
self.iriLabel.setText('IRI')
self.iriField = StringField(self)
self.iriField.setFixedWidth(300)
self.iriField.setFont(Font('Roboto', 12))
self.iriField.setValue(self.diagram.project.get_iri_of_node(node))
"""
self.iriversionLabel = QtWidgets.QLabel(self)
self.iriversionLabel.setFont(Font('Roboto', 12))
self.iriversionLabel.setText('IRI version')
self.iriversionField = StringField(self)
self.iriversionField.setFixedWidth(300)
self.iriversionField.setFont(Font('Roboto', 12))
self.iriversionField.setValue(self.node.IRI_version(diagram.project))
"""
#############################################
# LABEL TAB
#################################
self.textLabel = QtWidgets.QLabel(self)
self.textLabel.setFont(Font('Roboto', 12))
self.textLabel.setText('IRI Label')
self.textField = StringField(self)
self.textField.setFixedWidth(300)
self.textField.setFont(Font('Roboto', 12))
#if node.type() in {Item.AttributeNode, Item.ConceptNode, Item.RoleNode, Item.IndividualNode}:
if (('AttributeNode' in str(type(node)))
or ('ConceptNode' in str(type(node)))
or ('IndividualNode' in str(type(node)))
or ('RoleNode' in str(type(node)))):
self.textField.setValue(self.node.remaining_characters)
else:
self.textField.setValue(self.node.text().replace('\n', ''))
#if ((node.type() is Item.IndividualNode) and (node.identity() is Identity.Value)) or \
if(('IndividualNode' in str(type(node))) and (node.identity() is Identity.Value)) or \
(('IndividualNode' not in str(type(node))) and (node.special() is not None)):
self.textField.setReadOnly(True)
self.iriField.setReadOnly(True)
self.refactorLabel = QtWidgets.QLabel(self)
self.refactorLabel.setFont(Font('Roboto', 12))
self.refactorLabel.setText('Refactor')
self.refactorField = CheckBox(self)
self.refactorField.setFont(Font('Roboto', 12))
self.refactorField.setChecked(False)
#if node.type() in {Item.AttributeNode, Item.ConceptNode, Item.RoleNode}:
if (('AttributeNode' in str(type(node)))
or ('ConceptNode' in str(type(node)))
or ('RoleNode' in str(type(node)))):
if node.special() is not None:
self.refactorField.setEnabled(False)
self.FulliriLabel = QtWidgets.QLabel(self)
self.FulliriLabel.setFont(Font('Roboto', 12))
self.FulliriLabel.setText('Full IRI')
self.FulliriField = StringField(self)
self.FulliriField.setFixedWidth(300)
self.FulliriField.setFont(Font('Roboto', 12))
full_iri = self.project.get_full_IRI(self.iriField.value(), None,
self.textField.value().strip())
self.FulliriField.setValue(full_iri)
# self.FulliriField.setValue(self.iriField.value()+'#'+self.textField.value().strip())
self.FulliriField.setReadOnly(True)
self.labelWidget = QtWidgets.QWidget()
self.labelLayout = QtWidgets.QFormLayout(self.labelWidget)
self.labelLayout.addRow(self.iriLabel, self.iriField)
self.labelLayout.addRow(self.textLabel, self.textField)
self.labelLayout.addRow(self.FulliriLabel, self.FulliriField)
self.labelLayout.addRow(self.refactorLabel, self.refactorField)
self.mainWidget.addTab(self.labelWidget, 'IRI')
self.metaDataChanged_ADD_OK_var = None
self.metaDataChanged_REMOVE_OK_var = None
self.metaDataChanged_IGNORE_var = None
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def complete(self):
"""
Executed when the dialog is accepted.
"""
commands = [self.positionChanged()]
iri_changed_result = self.IRIChanged()
if iri_changed_result is not None:
if (str(type(iri_changed_result)) is
'<class \'str\'>') and ('Error in' in iri_changed_result):
super().reject()
return
else:
commands.extend(iri_changed_result)
text_changed_result = self.textChanged()
if text_changed_result is not None:
commands.extend(text_changed_result)
if any(commands):
self.session.undostack.beginMacro('edit {0} properties'.format(
self.node.name))
for command in commands:
if command:
self.session.undostack.push(command)
self.session.undostack.endMacro()
super().accept()
#############################################
# AUXILIARY METHODS
#################################
def textChanged(self):
unprocessed_new_text = self.textField.value().strip()
unprocessed_new_text = unprocessed_new_text if not isEmpty(
unprocessed_new_text) else self.node.label.template
exception_list = ['-', '_', '.', '~', '\n']
new_rc = ''
flag = False
for i, c in enumerate(unprocessed_new_text):
if c == '':
pass
elif i < (len(unprocessed_new_text) - 1) and (
c == '\\' and unprocessed_new_text[i + 1] == 'n'):
new_rc = new_rc + '\n'
elif i > 0 and (c == 'n' and unprocessed_new_text[i - 1] == '\\'):
pass
elif (not c.isalnum()) and (c not in exception_list):
new_rc = new_rc + '_'
flag = True
else:
new_rc = new_rc + c
#new_rc = new_rc.replace('\n','')
if flag is True:
self.session.statusBar().showMessage(
'Spaces in between alphanumeric characters and special characters were replaced by an underscore character.',
15000)
return_list = []
if (unprocessed_new_text != self.node.remaining_characters):
#print('unprocessed_new_text',unprocessed_new_text)
#print('self.node.remaining_characters',self.node.remaining_characters)
#print(NewlineFeedInsensitive(new_rc, self.node.remaining_characters).result())
return_list.append(
CommandProjectDisconnectSpecificSignals(self.project))
if self.refactorField.isChecked():
for n in self.project.nodes():
if n.text() == self.node.text():
return_list.append(
CommandNodeSetRemainingCharacters(
n.remaining_characters,
new_rc,
n,
self.project,
refactor=True))
else:
#refactor_var = NewlineFeedInsensitive(new_rc, self.node.remaining_characters).result()
#return_list.append(
# CommandNodeSetRemainingCharacters(self.node.remaining_characters, new_rc, self.node, self.project, refactor=refactor_var))
return_list.append(
CommandNodeSetRemainingCharacters(
self.node.remaining_characters, new_rc, self.node,
self.project))
return_list.append(
CommandProjectConnectSpecificSignals(self.project))
return return_list
return None
def IRIChanged(self):
#Change the iri of the node.
#:rtype: Command
IRI_valid = self.project.check_validity_of_IRI(self.iriField.value())
if IRI_valid is False:
self.session.statusBar().showMessage('Invalid IRI.', 15000)
return None
else:
old_iri = self.project.get_iri_of_node(self.node)
new_iri = self.iriField.value()
#if (self.iriField.value() != self.project.get_iri_of_node(node)) or (self.iriversionField.value() != self.node.IRI_version(self.project)):
if new_iri != old_iri:
connect(self.project.sgnIRINodeEntryAdded,
self.metaDataChanged_ADD_OK)
connect(self.project.sgnIRINodeEntryRemoved,
self.metaDataChanged_REMOVE_OK)
connect(self.project.sgnIRINodeEntryIgnored,
self.metaDataChanged_IGNORE)
# check for conflict in prefixes
# transaction = remove(old) + add(new)
# perform transaction on duplicate dict.
# if successful, original_dict = duplicate_dict
# else duplicate_dict = original_dict
Duplicate_dict_1 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
Duplicate_dict_2 = self.project.copy_IRI_prefixes_nodes_dictionaries(
self.project.IRI_prefixes_nodes_dict, dict())
list_of_nodes_to_process = []
if self.refactorField.isChecked():
for n in self.project.nodes():
if (('AttributeNode' in str(type(n)))
or ('ConceptNode' in str(type(n)))
or ('IndividualNode' in str(type(n)))
or ('RoleNode' in str(type(n)))):
if (self.project.get_iri_of_node(n) == old_iri
) and (n.remaining_characters
== self.node.remaining_characters):
list_of_nodes_to_process.append(n)
else:
list_of_nodes_to_process.append(self.node)
commands = []
for nd in list_of_nodes_to_process:
self.project.removeIRINodeEntry(Duplicate_dict_1, old_iri,
nd)
self.project.addIRINodeEntry(Duplicate_dict_1, new_iri, nd)
if (self.metaDataChanged_REMOVE_OK_var is True) and (
self.metaDataChanged_ADD_OK_var is True):
self.metaDataChanged_REMOVE_OK_var = False
self.metaDataChanged_ADD_OK_var = False
self.metaDataChanged_IGNORE_var = False
else:
LOGGER.warning(
'redo != undo but transaction was not executed correctly'
)
self.metaDataChanged_REMOVE_OK_var = False
self.metaDataChanged_ADD_OK_var = False
self.metaDataChanged_IGNORE_var = False
return str('Error in ' + str(nd))
if len(Duplicate_dict_1[new_iri][0]) == 0:
###
if 'display_in_widget' in Duplicate_dict_1[new_iri][2]:
new_label = ':' + self.node.remaining_characters
else:
new_label = self.project.get_full_IRI(
new_iri, None, self.node.remaining_characters)
else:
new_label = str(Duplicate_dict_1[new_iri][0][
len(Duplicate_dict_1[new_iri][0]) - 1] + ':' +
self.node.remaining_characters)
commands.append(
CommandProjectDisconnectSpecificSignals(self.project))
for nd in list_of_nodes_to_process:
commands.append(
CommandLabelChange(nd.diagram, nd, nd.text(),
new_label))
commands.append(
CommandProjetSetIRIPrefixesNodesDict(
self.project, Duplicate_dict_2, Duplicate_dict_1,
[new_iri, old_iri], list_of_nodes_to_process))
for nd in list_of_nodes_to_process:
commands.append(
CommandLabelChange(nd.diagram, nd, nd.text(),
new_label))
commands.append(
CommandProjectConnectSpecificSignals(self.project))
return commands
self.metaDataChanged_REMOVE_OK_var = False
self.metaDataChanged_ADD_OK_var = False
self.metaDataChanged_IGNORE_var = False
return None
@QtCore.pyqtSlot(str, str, str)
def metaDataChanged_REMOVE_OK(self, iri, node, message):
#print('metaDataChanged_REMOVE_OK -', iri, ',', node, ',', message)
self.metaDataChanged_REMOVE_OK_var = True
@QtCore.pyqtSlot(str, str, str)
def metaDataChanged_ADD_OK(self, iri, node, message):
#print('metaDataChanged_ADD_OK -', iri, ',', node, ',', message)
self.metaDataChanged_ADD_OK_var = True
@QtCore.pyqtSlot(str, str, str)
def metaDataChanged_IGNORE(self, iri, node, message):
#if node.id is None:
#print('metaDataChanged_IGNORE >', iri, '-', 'None', '-', message)
#else:
#print('metaDataChanged_IGNORE >', iri, '-', node, '-', message)
self.metaDataChanged_IGNORE_var = True
class PluginInstallDialog(QtWidgets.QDialog):
"""
Extends QtWidgets.QDialog providing an interface to install plugins.
"""
def __init__(self, session):
"""
Initialize the plugin install dialog.
:type session: Session
"""
super().__init__(session)
#############################################
# HEAD AREA
#################################
self.headTitle = QtWidgets.QLabel('Install a plugin', self)
self.headTitle.setFont(Font('Roboto', 12, bold=True))
self.headDescription = QtWidgets.QLabel(
dedent("""
Plugins are software components that add specific features to {0}.<br/>
Please select the plugin you wish to install.""".format(APPNAME)),
self)
self.headDescription.setFont(Font('Roboto', 12))
self.headPix = QtWidgets.QLabel(self)
self.headPix.setPixmap(
QtGui.QIcon(':/icons/48/ic_extension_black').pixmap(48))
self.headPix.setContentsMargins(0, 0, 0, 0)
self.headWidget = QtWidgets.QWidget(self)
self.headWidget.setProperty('class', 'head')
self.headWidget.setContentsMargins(10, 10, 10, 10)
self.headLayoutL = QtWidgets.QVBoxLayout()
self.headLayoutL.addWidget(self.headTitle)
self.headLayoutL.addWidget(self.headDescription)
self.headLayoutL.setContentsMargins(0, 0, 0, 0)
self.headLayoutR = QtWidgets.QVBoxLayout()
self.headLayoutR.addWidget(self.headPix, 0, QtCore.Qt.AlignRight)
self.headLayoutR.setContentsMargins(0, 0, 0, 0)
self.headLayoutM = QtWidgets.QHBoxLayout(self.headWidget)
self.headLayoutM.addLayout(self.headLayoutL)
self.headLayoutM.addLayout(self.headLayoutR)
self.headLayoutM.setContentsMargins(0, 0, 0, 0)
#############################################
# SELECTION AREA
#################################
self.pluginField = StringField(self)
self.pluginField.setFont(Font('Roboto', 12))
self.pluginField.setFixedWidth(400)
self.pluginField.setReadOnly(True)
self.btnBrowse = QtWidgets.QPushButton(self)
self.btnBrowse.setFont(Font('Roboto', 12))
self.btnBrowse.setFixedWidth(30)
self.btnBrowse.setText('...')
self.editLayout = QtWidgets.QHBoxLayout()
self.editLayout.setContentsMargins(10, 10, 10, 10)
self.editLayout.addWidget(self.pluginField)
self.editLayout.addWidget(self.btnBrowse)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(
QtWidgets.QDialogButtonBox.Ok, self)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setEnabled(False)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# SETUP DIALOG LAYOUT
#################################
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.headWidget)
self.mainLayout.addLayout(self.editLayout)
self.mainLayout.addWidget(self.confirmationBox, 0,
QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('Install a plugin')
connect(self.btnBrowse.clicked, self.selectPlugin)
connect(self.confirmationBox.accepted, self.accept)
#############################################
# PROPERTIES
#################################
@property
def session(self):
"""
Returns the reference to the main session (alias for PluginInstallDialog.parent()).
:rtype: Session
"""
return self.parent()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Trigger the install of the selected plugin.
"""
try:
spec = self.session.pmanager.install(self.pluginField.value())
except Exception as e:
msgbox = QtWidgets.QMessageBox(self)
msgbox.setIconPixmap(
QtGui.QIcon(':/icons/48/ic_error_outline_black').pixmap(48))
msgbox.setStandardButtons(QtWidgets.QMessageBox.Close)
msgbox.setText(
'{0} could not install plugin archive <b>{1}</b>: {2}'.format(
APPNAME, self.pluginField.value(), e))
msgbox.setDetailedText(format_exception(e))
msgbox.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
msgbox.setWindowTitle('Plugin install failed!')
msgbox.exec_()
else:
plugin_name = spec.get('plugin', 'name')
plugin_version = spec.get('plugin', 'version')
plugin_author = spec.get('plugin', 'author', fallback='<unknown>')
message = dedent(
"""Successfully installed plugin <b>{0} v{1}</b> by <b>{2}</b>.
Please reboot {3} for the plugin to work.""".format(
plugin_name, plugin_version, plugin_author, APPNAME))
msgbox = QtWidgets.QMessageBox(self)
msgbox.setIconPixmap(
QtGui.QIcon(':/icons/48/ic_done_black').pixmap(48))
msgbox.setStandardButtons(QtWidgets.QMessageBox.Close)
msgbox.setText(message)
msgbox.setTextFormat(QtCore.Qt.RichText)
msgbox.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
msgbox.setWindowTitle('Plugin installed!')
msgbox.exec_()
super().accept()
@QtCore.pyqtSlot()
def selectPlugin(self):
"""
Bring up a modal window that allows the user to choose a valid plugin archive.
"""
path = os.path.dirname(self.pluginField.value())
if not isPathValid(path):
path = expandPath('~')
dialog = QtWidgets.QFileDialog(self)
dialog.setAcceptMode(QtWidgets.QFileDialog.AcceptOpen)
dialog.setDirectory(path)
dialog.setFileMode(QtWidgets.QFileDialog.ExistingFile)
dialog.setViewMode(QtWidgets.QFileDialog.Detail)
dialog.setNameFilters([File.Zip.value])
if dialog.exec_() == QtWidgets.QFileDialog.Accepted:
self.pluginField.setValue(first(dialog.selectedFiles()))
self.confirmationBox.setEnabled(
not isEmpty(self.pluginField.value()))
class PluginInstallDialog(QtWidgets.QDialog):
"""
Extends QtWidgets.QDialog providing an interface to install plugins.
"""
def __init__(self, session):
"""
Initialize the plugin install dialog.
:type session: Session
"""
super().__init__(session)
#############################################
# HEAD AREA
#################################
self.headTitle = QtWidgets.QLabel('Install a plugin', self)
self.headTitle.setFont(Font('Roboto', 12, bold=True))
self.headDescription = QtWidgets.QLabel(dedent("""
Plugins are software components that add specific features to {0}.<br/>
Please select the plugin you wish to install.""".format(APPNAME)), self)
self.headDescription.setFont(Font('Roboto', 12))
self.headPix = QtWidgets.QLabel(self)
self.headPix.setPixmap(QtGui.QIcon(':/icons/48/ic_extension_black').pixmap(48))
self.headPix.setContentsMargins(0, 0, 0, 0)
self.headWidget = QtWidgets.QWidget(self)
self.headWidget.setProperty('class', 'head')
self.headWidget.setContentsMargins(10, 10, 10, 10)
self.headLayoutL = QtWidgets.QVBoxLayout()
self.headLayoutL.addWidget(self.headTitle)
self.headLayoutL.addWidget(self.headDescription)
self.headLayoutL.setContentsMargins(0, 0, 0, 0)
self.headLayoutR = QtWidgets.QVBoxLayout()
self.headLayoutR.addWidget(self.headPix, 0, QtCore.Qt.AlignRight)
self.headLayoutR.setContentsMargins(0, 0, 0, 0)
self.headLayoutM = QtWidgets.QHBoxLayout(self.headWidget)
self.headLayoutM.addLayout(self.headLayoutL)
self.headLayoutM.addLayout(self.headLayoutR)
self.headLayoutM.setContentsMargins(0, 0, 0, 0)
#############################################
# SELECTION AREA
#################################
self.pluginField = StringField(self)
self.pluginField.setFont(Font('Roboto', 12))
self.pluginField.setFixedWidth(400)
self.pluginField.setReadOnly(True)
self.btnBrowse = QtWidgets.QPushButton(self)
self.btnBrowse.setFont(Font('Roboto', 12))
self.btnBrowse.setFixedWidth(30)
self.btnBrowse.setText('...')
self.editLayout = QtWidgets.QHBoxLayout()
self.editLayout.setContentsMargins(10, 10, 10, 10)
self.editLayout.addWidget(self.pluginField)
self.editLayout.addWidget(self.btnBrowse)
#############################################
# CONFIRMATION AREA
#################################
self.confirmationBox = QtWidgets.QDialogButtonBox(QtWidgets.QDialogButtonBox.Ok, self)
self.confirmationBox.setContentsMargins(10, 0, 10, 10)
self.confirmationBox.setEnabled(False)
self.confirmationBox.setFont(Font('Roboto', 12))
#############################################
# SETUP DIALOG LAYOUT
#################################
self.mainLayout = QtWidgets.QVBoxLayout(self)
self.mainLayout.setContentsMargins(0, 0, 0, 0)
self.mainLayout.addWidget(self.headWidget)
self.mainLayout.addLayout(self.editLayout)
self.mainLayout.addWidget(self.confirmationBox, 0, QtCore.Qt.AlignRight)
self.setFixedSize(self.sizeHint())
self.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
self.setWindowTitle('Install a plugin')
connect(self.btnBrowse.clicked, self.selectPlugin)
connect(self.confirmationBox.accepted, self.accept)
#############################################
# PROPERTIES
#################################
@property
def session(self):
"""
Returns the reference to the main session (alias for PluginInstallDialog.parent()).
:rtype: Session
"""
return self.parent()
#############################################
# SLOTS
#################################
@QtCore.pyqtSlot()
def accept(self):
"""
Trigger the install of the selected plugin.
"""
try:
spec = self.session.pmanager.install(self.pluginField.value())
except Exception as e:
msgbox = QtWidgets.QMessageBox(self)
msgbox.setIconPixmap(QtGui.QIcon(':/icons/48/ic_error_outline_black').pixmap(48))
msgbox.setStandardButtons(QtWidgets.QMessageBox.Close)
msgbox.setText('{0} could not install plugin archive <b>{1}</b>: {2}'.format(APPNAME, self.pluginField.value(), e))
msgbox.setDetailedText(format_exception(e))
msgbox.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
msgbox.setWindowTitle('Plugin install failed!')
msgbox.exec_()
else:
plugin_name = spec.get('plugin', 'name')
plugin_version = spec.get('plugin', 'version')
plugin_author = spec.get('plugin', 'author', fallback='<unknown>')
message = dedent("""Successfully installed plugin <b>{0} v{1}</b> by <b>{2}</b>.
Please reboot {3} for the plugin to work.""".format(plugin_name, plugin_version, plugin_author, APPNAME))
msgbox = QtWidgets.QMessageBox(self)
msgbox.setIconPixmap(QtGui.QIcon(':/icons/48/ic_done_black').pixmap(48))
msgbox.setStandardButtons(QtWidgets.QMessageBox.Close)
msgbox.setText(message)
msgbox.setTextFormat(QtCore.Qt.RichText)
msgbox.setWindowIcon(QtGui.QIcon(':/icons/128/ic_eddy'))
msgbox.setWindowTitle('Plugin installed!')
msgbox.exec_()
super().accept()
@QtCore.pyqtSlot()
def selectPlugin(self):
"""
Bring up a modal window that allows the user to choose a valid plugin archive.
"""
path = os.path.dirname(self.pluginField.value())
if not isPathValid(path):
path = expandPath('~')
dialog = QtWidgets.QFileDialog(self)
dialog.setAcceptMode(QtWidgets.QFileDialog.AcceptOpen)
dialog.setDirectory(path)
dialog.setFileMode(QtWidgets.QFileDialog.ExistingFile)
dialog.setViewMode(QtWidgets.QFileDialog.Detail)
dialog.setNameFilters([File.Zip.value])
if dialog.exec_() == QtWidgets.QFileDialog.Accepted:
self.pluginField.setValue(first(dialog.selectedFiles()))
self.confirmationBox.setEnabled(not isEmpty(self.pluginField.value()))
