def SetUnloadImages(self, UnloadImages, Comments):
#
# It can be a list
#
ValueList = []
TokenList = GetSplitValueList(UnloadImages, DT.TAB_VALUE_SPLIT)
ValueList[0:len(TokenList)] = TokenList
InfDefineUnloadImageItemObj = InfDefineUnloadImageItem()
if not IsValidCVariableName(ValueList[0]):
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(ValueList[0]),
LineInfo=self.CurrentLine)
InfDefineUnloadImageItemObj.SetCName(ValueList[0])
if len(ValueList) == 2:
if ValueList[1].strip() == '':
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(ValueList[1]),
LineInfo=self.CurrentLine)
#
# Validate FFE
#
FeatureFlagRtv = IsValidFeatureFlagExp(ValueList[1].strip())
if not FeatureFlagRtv[0]:
ErrorInInf(ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
LineInfo=self.CurrentLine)
InfDefineUnloadImageItemObj.SetFeatureFlagExp(ValueList[1])
if len(ValueList) > 2:
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(UnloadImages),
LineInfo=self.CurrentLine)
InfDefineUnloadImageItemObj.Comments = Comments
self.UnloadImages.append(InfDefineUnloadImageItemObj)
def IsValidPcdDatum(Type, Value):
if not Value:
return False, ST.ERR_DECPARSE_PCD_VALUE_EMPTY
Valid = True
Cause = ""
if Type not in ["UINT8", "UINT16", "UINT32", "UINT64", "VOID*", "BOOLEAN"]:
return False, ST.ERR_DECPARSE_PCD_TYPE
if Type == "VOID*":
if not ((Value.startswith('L"') or Value.startswith('"') and \
Value.endswith('"'))
or (IsValidCArray(Value)) or (IsValidCFormatGuid(Value)) \
or (IsValidNList(Value)) or (CheckGuidRegFormat(Value))
):
return False, ST.ERR_DECPARSE_PCD_VOID % (Value, Type)
RealString = Value[Value.find('"') + 1:-1]
if RealString:
if not IsValidBareCString(RealString):
return False, ST.ERR_DECPARSE_PCD_VOID % (Value, Type)
elif Type == 'BOOLEAN':
if Value in [
'TRUE', 'FALSE', 'true', 'false', 'True', 'False', '0x1',
'0x01', '1', '0x0', '0x00', '0'
]:
return True, ""
Valid, Cause = IsValidStringTest(Value, True)
if not Valid:
Valid, Cause = IsValidFeatureFlagExp(Value, True)
if not Valid:
return False, Cause
else:
if Value and (Value[0] == '-' or Value[0] == '+'):
return False, ST.ERR_DECPARSE_PCD_INT_NEGTIVE % (Value, Type)
try:
StrVal = Value
if Value and not Value.startswith('0x') \
and not Value.startswith('0X'):
Value = Value.lstrip('0')
if not Value:
return True, ""
Value = int(Value, 0)
MAX_VAL_TYPE = {
"BOOLEAN": 0x01,
'UINT8': 0xFF,
'UINT16': 0xFFFF,
'UINT32': 0xFFFFFFFF,
'UINT64': 0xFFFFFFFFFFFFFFFF
}
if Value > MAX_VAL_TYPE[Type]:
return False, ST.ERR_DECPARSE_PCD_INT_EXCEED % (StrVal, Type)
except BaseException:
Valid, Cause = IsValidLogicalExpr(Value, True)
if not Valid:
return False, Cause
return True, ""
def SetDestructor(self, Destructor, Comments):
#
# It can be a list and only 1 set to TRUE
#
ValueList = []
TokenList = GetSplitValueList(Destructor, DT.TAB_VALUE_SPLIT)
ValueList[0:len(TokenList)] = TokenList
InfDefineDestructorItemObj = InfDefineDestructorItem()
if not IsValidCVariableName(ValueList[0]):
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(ValueList[0]),
LineInfo=self.CurrentLine)
InfDefineDestructorItemObj.SetCName(ValueList[0])
if len(ValueList) >= 2:
ModList = GetSplitValueList(ValueList[1].strip(), ' ')
if ValueList[1].strip() == '':
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(ValueList[1]),
LineInfo=self.CurrentLine)
for ModItem in ModList:
if ModItem not in DT.MODULE_LIST:
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_MODULETYPE_INVALID %
(ModItem),
LineInfo=self.CurrentLine)
InfDefineDestructorItemObj.SetSupModList(ModList)
if len(ValueList) == 3:
if ValueList[2].strip() == '':
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(ValueList[2]),
LineInfo=self.CurrentLine)
#
# Validate FFE
#
FeatureFlagRtv = IsValidFeatureFlagExp(ValueList[2].strip())
if not FeatureFlagRtv[0]:
ErrorInInf(ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
LineInfo=self.CurrentLine)
InfDefineDestructorItemObj.SetFeatureFlagExp(ValueList[2])
if len(ValueList) > 3:
ErrorInInf(ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID % (Destructor),
LineInfo=self.CurrentLine)
InfDefineDestructorItemObj.Comments = Comments
self.Destructor.append(InfDefineDestructorItemObj)
def SetBinary(self,
UiInf=None,
Ver=None,
CommonBinary=None,
ArchList=None):
__SupArchList = []
for ArchItem in ArchList:
#
# Validate Arch
#
if (ArchItem == '' or ArchItem is None):
ArchItem = 'COMMON'
__SupArchList.append(ArchItem)
if UiInf is not None:
if len(UiInf) > 0:
#
# Check UI
#
for UiItem in UiInf:
IsValidFileFlag = False
InfBianryUiItemObj = None
UiContent = UiItem[0]
UiComment = UiItem[1]
UiCurrentLine = UiItem[2]
GlobalData.gINF_CURRENT_LINE = deepcopy(UiItem[2])
#
# Should not less than 2 elements
#
if len(UiContent) < 2:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID %
(UiContent[0], 2),
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
return False
if len(UiContent) > 4:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID_MAX %
(UiContent[0], 4),
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
return False
if len(UiContent) >= 2:
#
# Create an Ui Object.
#
InfBianryUiItemObj = InfBianryUiItem()
if UiContent[0] != 'UI':
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_VER_TYPE % ('UI'),
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
InfBianryUiItemObj.SetUiTypeName(UiContent[0])
InfBianryUiItemObj.SetType(UiContent[0])
#
# Verify File exist or not
#
FullFileName = os.path.normpath(
os.path.realpath(
os.path.join(GlobalData.gINF_MODULE_DIR,
UiContent[1])))
if not (ValidFile(FullFileName)
or ValidFile(UiContent[1])):
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FILE_NOT_EXIST %
(UiContent[1]),
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
#
# Validate file exist/format.
#
if IsValidPath(UiContent[1],
GlobalData.gINF_MODULE_DIR):
IsValidFileFlag = True
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.
ERR_INF_PARSER_FILE_NOT_EXIST_OR_NAME_INVALID %
(UiContent[1]),
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
return False
if IsValidFileFlag:
UiContent[0] = ConvPathFromAbsToRel(
UiContent[0], GlobalData.gINF_MODULE_DIR)
InfBianryUiItemObj.SetFileName(UiContent[1])
if len(UiContent) >= 3:
#
# Add Target information
#
InfBianryUiItemObj.SetTarget(UiContent[2])
if len(UiContent) == 4:
if UiContent[3].strip() == '':
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
#
# Validate Feature Flag Express
#
FeatureFlagRtv = IsValidFeatureFlagExp(
UiContent[3].strip())
if not FeatureFlagRtv[0]:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.
ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
File=UiCurrentLine.GetFileName(),
Line=UiCurrentLine.GetLineNo(),
ExtraData=UiCurrentLine.GetLineString())
InfBianryUiItemObj.SetFeatureFlagExp(UiContent[3])
InfBianryUiItemObj.SetSupArchList(__SupArchList)
#
# Determine binary file name duplicate. Follow below rule:
#
# A binary filename must not be duplicated within
# a [Binaries] section. A binary filename may appear in
# multiple architectural [Binaries] sections. A binary
# filename listed in an architectural [Binaries] section
# must not be listed in the common architectural
# [Binaries] section.
#
# NOTE: This check will not report error now.
#
# for Item in self.Binaries:
# if Item.GetFileName() == InfBianryUiItemObj.GetFileName():
# ItemSupArchList = Item.GetSupArchList()
# for ItemArch in ItemSupArchList:
# for UiItemObjArch in __SupArchList:
# if ItemArch == UiItemObjArch:
# #
# # ST.ERR_INF_PARSER_ITEM_DUPLICATE
# #
# pass
# if ItemArch.upper() == 'COMMON' or UiItemObjArch.upper() == 'COMMON':
# #
# # ERR_INF_PARSER_ITEM_DUPLICATE_COMMON
# #
# pass
if InfBianryUiItemObj is not None:
if (InfBianryUiItemObj) in self.Binaries:
BinariesList = self.Binaries[InfBianryUiItemObj]
BinariesList.append(
(InfBianryUiItemObj, UiComment))
self.Binaries[InfBianryUiItemObj] = BinariesList
else:
BinariesList = []
BinariesList.append(
(InfBianryUiItemObj, UiComment))
self.Binaries[InfBianryUiItemObj] = BinariesList
if Ver is not None and len(Ver) > 0:
self.CheckVer(Ver, __SupArchList)
if CommonBinary and len(CommonBinary) > 0:
self.ParseCommonBinary(CommonBinary, __SupArchList)
return True
def ParseCommonBinary(self, CommonBinary, __SupArchList):
#
# Check common binary definitions
# Type | FileName | Target | Family | TagName | FeatureFlagExp
#
for Item in CommonBinary:
IsValidFileFlag = False
ItemContent = Item[0]
ItemComment = Item[1]
CurrentLineOfItem = Item[2]
GlobalData.gINF_CURRENT_LINE = CurrentLineOfItem
InfBianryCommonItemObj = None
if ItemContent[0] == 'SUBTYPE_GUID':
if len(ItemContent) < 3:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID %
(ItemContent[0], 3),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
return False
else:
if len(ItemContent) < 2:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID %
(ItemContent[0], 2),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
return False
if len(ItemContent) > 7:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID_MAX %
(ItemContent[0], 7),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
return False
if len(ItemContent) >= 2:
#
# Create a Common Object.
#
InfBianryCommonItemObj = InfBianryCommonItem()
#
# Convert Binary type.
#
BinaryFileType = ItemContent[0].strip()
if BinaryFileType == 'RAW' or BinaryFileType == 'ACPI' or BinaryFileType == 'ASL':
BinaryFileType = 'BIN'
if BinaryFileType not in DT.BINARY_FILE_TYPE_LIST:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_INVALID_FILETYPE % \
(DT.BINARY_FILE_TYPE_LIST.__str__()),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
if BinaryFileType == 'SUBTYPE_GUID':
BinaryFileType = 'FREEFORM'
if BinaryFileType == 'LIB' or BinaryFileType == 'UEFI_APP':
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_INVALID_FILETYPE % \
(DT.BINARY_FILE_TYPE_LIST.__str__()),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
InfBianryCommonItemObj.SetType(BinaryFileType)
InfBianryCommonItemObj.SetCommonType(ItemContent[0])
FileName = ''
if BinaryFileType == 'FREEFORM':
InfBianryCommonItemObj.SetGuidValue(ItemContent[1])
if len(ItemContent) >= 3:
FileName = ItemContent[2]
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FILENAME_NOT_EXIST,
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
else:
FileName = ItemContent[1]
#
# Verify File exist or not
#
FullFileName = os.path.normpath(
os.path.realpath(
os.path.join(GlobalData.gINF_MODULE_DIR, FileName)))
if not (ValidFile(FullFileName) or ValidFile(FileName)):
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FILE_NOT_EXIST %
(FileName),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
#
# Validate file exist/format.
#
if IsValidPath(FileName, GlobalData.gINF_MODULE_DIR):
IsValidFileFlag = True
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FILE_NOT_EXIST_OR_NAME_INVALID %
(FileName),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
return False
if IsValidFileFlag:
ItemContent[0] = ConvPathFromAbsToRel(
ItemContent[0], GlobalData.gINF_MODULE_DIR)
InfBianryCommonItemObj.SetFileName(FileName)
if len(ItemContent) >= 3:
#
# Add Target information
#
if BinaryFileType != 'FREEFORM':
InfBianryCommonItemObj.SetTarget(ItemContent[2])
if len(ItemContent) >= 4:
#
# Add Family information
#
if BinaryFileType != 'FREEFORM':
InfBianryCommonItemObj.SetFamily(ItemContent[3])
else:
InfBianryCommonItemObj.SetTarget(ItemContent[3])
if len(ItemContent) >= 5:
#
# TagName entries are build system specific. If there
# is content in the entry, the tool must exit
# gracefully with an error message that indicates build
# system specific content cannot be distributed using
# the UDP
#
if BinaryFileType != 'FREEFORM':
if ItemContent[4].strip() != '':
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_TAGNAME_NOT_PERMITTED %
(ItemContent[4]),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
else:
InfBianryCommonItemObj.SetFamily(ItemContent[4])
if len(ItemContent) >= 6:
#
# Add FeatureFlagExp
#
if BinaryFileType != 'FREEFORM':
if ItemContent[5].strip() == '':
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
#
# Validate Feature Flag Express
#
FeatureFlagRtv = IsValidFeatureFlagExp(
ItemContent[5].strip())
if not FeatureFlagRtv[0]:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
InfBianryCommonItemObj.SetFeatureFlagExp(ItemContent[5])
else:
if ItemContent[5].strip() != '':
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_TAGNAME_NOT_PERMITTED %
(ItemContent[5]),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
if len(ItemContent) == 7:
if ItemContent[6].strip() == '':
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
#
# Validate Feature Flag Express
#
FeatureFlagRtv = IsValidFeatureFlagExp(ItemContent[6].strip())
if not FeatureFlagRtv[0]:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
File=CurrentLineOfItem.GetFileName(),
Line=CurrentLineOfItem.GetLineNo(),
ExtraData=CurrentLineOfItem.GetLineString())
InfBianryCommonItemObj.SetFeatureFlagExp(ItemContent[6])
InfBianryCommonItemObj.SetSupArchList(__SupArchList)
#
# Determine binary file name duplicate. Follow below rule:
#
# A binary filename must not be duplicated within
# a [Binaries] section. A binary filename may appear in
# multiple architectural [Binaries] sections. A binary
# filename listed in an architectural [Binaries] section
# must not be listed in the common architectural
# [Binaries] section.
#
# NOTE: This check will not report error now.
#
# for Item in self.Binaries:
# if Item.GetFileName() == InfBianryCommonItemObj.GetFileName():
# ItemSupArchList = Item.GetSupArchList()
# for ItemArch in ItemSupArchList:
# for ComItemObjArch in __SupArchList:
# if ItemArch == ComItemObjArch:
# #
# # ST.ERR_INF_PARSER_ITEM_DUPLICATE
# #
# pass
#
# if ItemArch.upper() == 'COMMON' or ComItemObjArch.upper() == 'COMMON':
# #
# # ERR_INF_PARSER_ITEM_DUPLICATE_COMMON
# #
# pass
if InfBianryCommonItemObj is not None:
if (InfBianryCommonItemObj) in self.Binaries:
BinariesList = self.Binaries[InfBianryCommonItemObj]
BinariesList.append((InfBianryCommonItemObj, ItemComment))
self.Binaries[InfBianryCommonItemObj] = BinariesList
else:
BinariesList = []
BinariesList.append((InfBianryCommonItemObj, ItemComment))
self.Binaries[InfBianryCommonItemObj] = BinariesList
def CheckVer(self, Ver, __SupArchList):
#
# Check Ver
#
for VerItem in Ver:
IsValidFileFlag = False
VerContent = VerItem[0]
VerComment = VerItem[1]
VerCurrentLine = VerItem[2]
GlobalData.gINF_CURRENT_LINE = VerCurrentLine
InfBianryVerItemObj = None
#
# Should not less than 2 elements
#
if len(VerContent) < 2:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID %
(VerContent[0], 2),
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
return False
if len(VerContent) > 4:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FORMAT_INVALID_MAX %
(VerContent[0], 4),
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
return False
if len(VerContent) >= 2:
#
# Create a Ver Object.
#
InfBianryVerItemObj = InfBianryVerItem()
if VerContent[0] != DT.BINARY_FILE_TYPE_VER:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_VER_TYPE %
DT.BINARY_FILE_TYPE_VER,
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
InfBianryVerItemObj.SetVerTypeName(VerContent[0])
InfBianryVerItemObj.SetType(VerContent[0])
#
# Verify File exist or not
#
FullFileName = os.path.normpath(
os.path.realpath(
os.path.join(GlobalData.gINF_MODULE_DIR,
VerContent[1])))
if not (ValidFile(FullFileName) or ValidFile(VerContent[1])):
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_BINARY_ITEM_FILE_NOT_EXIST %
(VerContent[1]),
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
#
# Validate file exist/format.
#
if IsValidPath(VerContent[1], GlobalData.gINF_MODULE_DIR):
IsValidFileFlag = True
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FILE_NOT_EXIST_OR_NAME_INVALID %
(VerContent[1]),
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
return False
if IsValidFileFlag:
VerContent[0] = ConvPathFromAbsToRel(
VerContent[0], GlobalData.gINF_MODULE_DIR)
InfBianryVerItemObj.SetFileName(VerContent[1])
if len(VerContent) >= 3:
#
# Add Target information
#
InfBianryVerItemObj.SetTarget(VerContent[2])
if len(VerContent) == 4:
if VerContent[3].strip() == '':
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
#
# Validate Feature Flag Express
#
FeatureFlagRtv = IsValidFeatureFlagExp(VerContent[3].\
strip())
if not FeatureFlagRtv[0]:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
File=VerCurrentLine.GetFileName(),
Line=VerCurrentLine.GetLineNo(),
ExtraData=VerCurrentLine.GetLineString())
InfBianryVerItemObj.SetFeatureFlagExp(VerContent[3])
InfBianryVerItemObj.SetSupArchList(__SupArchList)
#
# Determine binary file name duplicate. Follow below rule:
#
# A binary filename must not be duplicated within
# a [Binaries] section. A binary filename may appear in
# multiple architectural [Binaries] sections. A binary
# filename listed in an architectural [Binaries] section
# must not be listed in the common architectural
# [Binaries] section.
#
# NOTE: This check will not report error now.
#
for Item in self.Binaries:
if Item.GetFileName() == InfBianryVerItemObj.GetFileName():
ItemSupArchList = Item.GetSupArchList()
for ItemArch in ItemSupArchList:
for VerItemObjArch in __SupArchList:
if ItemArch == VerItemObjArch:
#
# ST.ERR_INF_PARSER_ITEM_DUPLICATE
#
pass
if ItemArch.upper(
) == 'COMMON' or VerItemObjArch.upper(
) == 'COMMON':
#
# ERR_INF_PARSER_ITEM_DUPLICATE_COMMON
#
pass
if InfBianryVerItemObj is not None:
if (InfBianryVerItemObj) in self.Binaries:
BinariesList = self.Binaries[InfBianryVerItemObj]
BinariesList.append((InfBianryVerItemObj, VerComment))
self.Binaries[InfBianryVerItemObj] = BinariesList
else:
BinariesList = []
BinariesList.append((InfBianryVerItemObj, VerComment))
self.Binaries[InfBianryVerItemObj] = BinariesList
def SetLibraryClasses(self, LibContent, KeyList=None):
#
# Validate Arch
#
(__SupArchList, __SupModuleList) = GetArchModuleType(KeyList)
for LibItem in LibContent:
LibItemObj = InfLibraryClassItem()
if not GlobalData.gIS_BINARY_INF:
HelpStringObj = LibItem[1]
LibItemObj.CurrentLine.SetFileName(LibItem[2][2])
LibItemObj.CurrentLine.SetLineNo(LibItem[2][1])
LibItemObj.CurrentLine.SetLineString(LibItem[2][0])
LibItem = LibItem[0]
if HelpStringObj is not None:
LibItemObj.SetHelpString(HelpStringObj)
if len(LibItem) >= 1:
if LibItem[0].strip() != '':
if IsValidLibName(LibItem[0].strip()):
if LibItem[0].strip() != 'NULL':
LibItemObj.SetLibName(LibItem[0])
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_DEFINE_LIB_NAME_INVALID,
File=GlobalData.gINF_MODULE_NAME,
Line=LibItemObj.CurrentLine.GetLineNo(),
ExtraData=LibItemObj.CurrentLine.
GetLineString())
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_DEFINE_FROMAT_INVALID %
(LibItem[0]),
File=GlobalData.gINF_MODULE_NAME,
Line=LibItemObj.CurrentLine.GetLineNo(),
ExtraData=LibItemObj.CurrentLine.GetLineString(
))
else:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_LIBRARY_SECTION_LIBNAME_MISSING,
File=GlobalData.gINF_MODULE_NAME,
Line=LibItemObj.CurrentLine.GetLineNo(),
ExtraData=LibItemObj.CurrentLine.GetLineString())
if len(LibItem) == 2:
if LibItem[1].strip() == '':
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=GlobalData.gINF_MODULE_NAME,
Line=LibItemObj.CurrentLine.GetLineNo(),
ExtraData=LibItemObj.CurrentLine.GetLineString())
#
# Validate FFE
#
FeatureFlagRtv = IsValidFeatureFlagExp(LibItem[1].strip())
if not FeatureFlagRtv[0]:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
File=GlobalData.gINF_MODULE_NAME,
Line=LibItemObj.CurrentLine.GetLineNo(),
ExtraData=LibItemObj.CurrentLine.GetLineString())
LibItemObj.SetFeatureFlagExp(LibItem[1].strip())
#
# Invalid strings
#
if len(LibItem) < 1 or len(LibItem) > 2:
Logger.Error(
"InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_LIBRARY_SECTION_CONTENT_ERROR,
File=GlobalData.gINF_MODULE_NAME,
Line=LibItemObj.CurrentLine.GetLineNo(),
ExtraData=LibItemObj.CurrentLine.GetLineString())
LibItemObj.SetSupArchList(__SupArchList)
LibItemObj.SetSupModuleList(__SupModuleList)
#
# Determine Library class duplicate. Follow below rule:
#
# A library class keyword must not be duplicated within a
# [LibraryClasses] section. Library class keywords may appear in
# multiple architectural and module type [LibraryClasses] sections.
# A library class keyword listed in an architectural or module type
# [LibraryClasses] section must not be listed in the common
# architectural or module type [LibraryClasses] section.
#
# NOTE: This check will not report error now. But keep code for future enhancement.
#
# for Item in self.LibraryClasses:
# if Item.GetLibName() == LibItemObj.GetLibName():
# ItemSupArchList = Item.GetSupArchList()
# ItemSupModuleList = Item.GetSupModuleList()
# for ItemArch in ItemSupArchList:
# for ItemModule in ItemSupModuleList:
# for LibItemObjArch in __SupArchList:
# for LibItemObjModule in __SupModuleList:
# if ItemArch == LibItemObjArch and LibItemObjModule == ItemModule:
# #
# # ERR_INF_PARSER_ITEM_DUPLICATE
# #
# pass
# if (ItemArch.upper() == 'COMMON' or LibItemObjArch.upper() == 'COMMON') \
# and LibItemObjModule == ItemModule:
# #
# # ERR_INF_PARSER_ITEM_DUPLICATE_COMMON
# #
# pass
else:
#
# Assume the file GUID is well formatted.
#
LibItemObj.SetFileGuid(LibItem[0])
LibItemObj.SetVersion(LibItem[1])
LibItemObj.SetSupArchList(__SupArchList)
if (LibItemObj) in self.LibraryClasses:
LibraryList = self.LibraryClasses[LibItemObj]
LibraryList.append(LibItemObj)
self.LibraryClasses[LibItemObj] = LibraryList
else:
LibraryList = []
LibraryList.append(LibItemObj)
self.LibraryClasses[LibItemObj] = LibraryList
return True
def SetProtocol(
self,
ProtocolContent,
Arch=None,
):
__SupArchList = []
for ArchItem in Arch:
#
# Validate Arch
#
if (ArchItem == '' or ArchItem is None):
ArchItem = 'COMMON'
__SupArchList.append(ArchItem)
for Item in ProtocolContent:
#
# Get Comment content of this protocol
#
CommentsList = None
if len(Item) == 3:
CommentsList = Item[1]
CurrentLineOfItem = Item[2]
LineInfo = (CurrentLineOfItem[2], CurrentLineOfItem[1],
CurrentLineOfItem[0])
Item = Item[0]
InfProtocolItemObj = InfProtocolItem()
if len(Item) >= 1 and len(Item) <= 2:
#
# Only CName contained
#
if not IsValidCVariableName(Item[0]):
ErrorInInf(ST.ERR_INF_PARSER_INVALID_CNAME % (Item[0]),
LineInfo=LineInfo)
if (Item[0] != ''):
InfProtocolItemObj.SetName(Item[0])
else:
ErrorInInf(ST.ERR_INF_PARSER_CNAME_MISSING,
LineInfo=LineInfo)
if len(Item) == 2:
#
# Contained CName and Feature Flag Express
# <statements> ::= <CName> ["|"
# <FeatureFlagExpress>]
# For Protocol Object
#
if Item[1].strip() == '':
ErrorInInf(ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
LineInfo=LineInfo)
#
# Validate Feature Flag Express for Item[1]
#
FeatureFlagRtv = IsValidFeatureFlagExp(Item[1].strip())
if not FeatureFlagRtv[0]:
ErrorInInf(
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
LineInfo=LineInfo)
InfProtocolItemObj.SetFeatureFlagExp(Item[1])
if len(Item) < 1 or len(Item) > 2:
#
# Invalid format of Protocols statement
#
ErrorInInf(
ST.ERR_INF_PARSER_GUID_PPI_PROTOCOL_SECTION_CONTENT_ERROR,
LineInfo=LineInfo)
#
# Get/Set Usage and HelpString for Protocol entry
#
if CommentsList is not None and len(CommentsList) != 0:
InfProtocolItemObj = ParseProtocolComment(
CommentsList, InfProtocolItemObj)
else:
CommentItemIns = InfProtocolItemCommentContent()
CommentItemIns.SetUsageItem(DT.ITEM_UNDEFINED)
CommentItemIns.SetNotify(DT.ITEM_UNDEFINED)
InfProtocolItemObj.SetCommentList([CommentItemIns])
InfProtocolItemObj.SetSupArchList(__SupArchList)
#
# Determine protocol name duplicate. Follow below rule:
#
# A protocol must not be duplicated within a [Protocols] section.
# A protocol may appear in multiple architectural [Protocols]
# sections. A protocol listed in an architectural [Protocols]
# section must not be listed in the common architectural
# [Protocols] section.
#
# NOTE: This check will not report error now.
#
for Item in self.Protocols:
if Item.GetName() == InfProtocolItemObj.GetName():
ItemSupArchList = Item.GetSupArchList()
for ItemArch in ItemSupArchList:
for ProtocolItemObjArch in __SupArchList:
if ItemArch == ProtocolItemObjArch:
#
# ST.ERR_INF_PARSER_ITEM_DUPLICATE
#
pass
if ItemArch.upper(
) == 'COMMON' or ProtocolItemObjArch.upper(
) == 'COMMON':
#
# ST.ERR_INF_PARSER_ITEM_DUPLICATE_COMMON
#
pass
if (InfProtocolItemObj) in self.Protocols:
ProcotolList = self.Protocols[InfProtocolItemObj]
ProcotolList.append(InfProtocolItemObj)
self.Protocols[InfProtocolItemObj] = ProcotolList
else:
ProcotolList = []
ProcotolList.append(InfProtocolItemObj)
self.Protocols[InfProtocolItemObj] = ProcotolList
return True
def IsValidPcdValue(PcdValue):
for Char in PcdValue:
if Char == '\n' or Char == '\t' or Char == '\f':
return False
#
# <Boolean>
#
if IsValidFeatureFlagExp(PcdValue, True)[0]:
return True
#
# <Number> ::= {<Integer>} {<HexNumber>}
# <Integer> ::= {(0-9)} {(1-9)(0-9){1,}}
# <HexNumber> ::= "0x" <HexDigit>{1,}
# <HexDigit> ::= (a-fA-F0-9)
#
if IsValidHex(PcdValue):
return True
ReIsValidIntegerSingle = re.compile(r"^\s*[0-9]\s*$", re.DOTALL)
if ReIsValidIntegerSingle.match(PcdValue) is not None:
return True
ReIsValidIntegerMulti = re.compile(r"^\s*[1-9][0-9]+\s*$", re.DOTALL)
if ReIsValidIntegerMulti.match(PcdValue) is not None:
return True
#
# <StringVal> ::= {<StringType>} {<Array>} {"$(" <MACRO> ")"}
# <StringType> ::= {<UnicodeString>} {<CString>}
#
ReIsValidStringType = re.compile(r"^\s*[\"L].*[\"]\s*$")
if ReIsValidStringType.match(PcdValue):
IsTrue = False
if PcdValue.strip().startswith('L\"'):
StringValue = PcdValue.strip().lstrip('L\"').rstrip('\"')
if IsValidBareCString(StringValue):
IsTrue = True
elif PcdValue.strip().startswith('\"'):
StringValue = PcdValue.strip().lstrip('\"').rstrip('\"')
if IsValidBareCString(StringValue):
IsTrue = True
if IsTrue:
return IsTrue
#
# <Array> ::= {<CArray>} {<NList>} {<CFormatGUID>}
# <CArray> ::= "{" [<NList>] <CArray>{0,} "}"
# <NList> ::= <HexByte> ["," <HexByte>]{0,}
# <HexDigit> ::= (a-fA-F0-9)
# <HexByte> ::= "0x" <HexDigit>{1,2}
#
if IsValidCFormatGuid(PcdValue):
return True
ReIsValidByteHex = re.compile(r"^\s*0x[0-9a-fA-F]{1,2}\s*$", re.DOTALL)
if PcdValue.strip().startswith('{') and PcdValue.strip().endswith('}'):
StringValue = PcdValue.strip().lstrip('{').rstrip('}')
ValueList = StringValue.split(',')
AllValidFlag = True
for ValueItem in ValueList:
if not ReIsValidByteHex.match(ValueItem.strip()):
AllValidFlag = False
if AllValidFlag:
return True
#
# NList
#
AllValidFlag = True
ValueList = PcdValue.split(',')
for ValueItem in ValueList:
if not ReIsValidByteHex.match(ValueItem.strip()):
AllValidFlag = False
if AllValidFlag:
return True
return False
def SetPpi(self, PpiList, Arch = None):
__SupArchList = []
for ArchItem in Arch:
#
# Validate Arch
#
if (ArchItem == '' or ArchItem is None):
ArchItem = 'COMMON'
__SupArchList.append(ArchItem)
for Item in PpiList:
#
# Get Comment content of this protocol
#
CommentsList = None
if len(Item) == 3:
CommentsList = Item[1]
CurrentLineOfItem = Item[2]
Item = Item[0]
InfPpiItemObj = InfPpiItem()
if len(Item) >= 1 and len(Item) <= 2:
#
# Only CName contained
#
if not IsValidCVariableName(Item[0]):
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_INVALID_CNAME%(Item[0]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
if (Item[0] != ''):
InfPpiItemObj.SetName(Item[0])
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_CNAME_MISSING,
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
#
# Have FeatureFlag information
#
if len(Item) == 2:
#
# Contained CName and Feature Flag Express
# <statements> ::= <CName> ["|" <FeatureFlagExpress>]
# Item[1] should not be empty
#
if Item[1].strip() == '':
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
#
# Validate Feature Flag Express for PPI entry
# Item[1] contain FFE information
#
FeatureFlagRtv = IsValidFeatureFlagExp(Item[1].strip())
if not FeatureFlagRtv[0]:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID%(FeatureFlagRtv[1]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
InfPpiItemObj.SetFeatureFlagExp(Item[1])
if len(Item) != 1 and len(Item) != 2:
#
# Invalid format of Ppi statement
#
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_GUID_PPI_PROTOCOL_SECTION_CONTENT_ERROR,
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
#
# Get/Set Usage and HelpString for PPI entry
#
if CommentsList is not None and len(CommentsList) != 0:
InfPpiItemObj = ParsePpiComment(CommentsList, InfPpiItemObj)
else:
CommentItemIns = InfPpiItemCommentContent()
CommentItemIns.SetUsage(DT.ITEM_UNDEFINED)
CommentItemIns.SetNotify(DT.ITEM_UNDEFINED)
InfPpiItemObj.SetCommentList([CommentItemIns])
InfPpiItemObj.SetSupArchList(__SupArchList)
#
# Determine PPI name duplicate. Follow below rule:
#
# A PPI must not be duplicated within a [Ppis] section.
# A PPI may appear in multiple architectural [Ppis]
# sections. A PPI listed in an architectural [Ppis]
# section must not be listed in the common architectural
# [Ppis] section.
#
# NOTE: This check will not report error now.
#
for Item in self.Ppis:
if Item.GetName() == InfPpiItemObj.GetName():
ItemSupArchList = Item.GetSupArchList()
for ItemArch in ItemSupArchList:
for PpiItemObjArch in __SupArchList:
if ItemArch == PpiItemObjArch:
#
# ST.ERR_INF_PARSER_ITEM_DUPLICATE
#
pass
if ItemArch.upper() == 'COMMON' or PpiItemObjArch.upper() == 'COMMON':
#
# ST.ERR_INF_PARSER_ITEM_DUPLICATE_COMMON
#
pass
if (InfPpiItemObj) in self.Ppis:
PpiList = self.Ppis[InfPpiItemObj]
PpiList.append(InfPpiItemObj)
self.Ppis[InfPpiItemObj] = PpiList
else:
PpiList = []
PpiList.append(InfPpiItemObj)
self.Ppis[InfPpiItemObj] = PpiList
return True
def GenSourceInstance(Item, CurrentLineOfItem, ItemObj):
IsValidFileFlag = False
if len(Item) < 6 and len(Item) >= 1:
#
# File | Family | TagName | ToolCode | FeatureFlagExpr
#
if len(Item) == 5:
#
# Validate Feature Flag Express
#
if Item[4].strip() == '':
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
#
# Validate FFE
#
FeatureFlagRtv = IsValidFeatureFlagExp(Item[4].strip())
if not FeatureFlagRtv[0]:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID %
(FeatureFlagRtv[1]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
ItemObj.SetFeatureFlagExp(Item[4])
if len(Item) >= 4:
if Item[3].strip() == '':
ItemObj.SetToolCode(Item[3])
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_TOOLCODE_NOT_PERMITTED %
(Item[2]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
if len(Item) >= 3:
if Item[2].strip() == '':
ItemObj.SetTagName(Item[2])
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_TAGNAME_NOT_PERMITTED %
(Item[2]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
if len(Item) >= 2:
if IsValidFamily(Item[1].strip()):
#
# To align with UDP specification. "*" is not permitted in UDP specification
#
if Item[1].strip() == "*":
Item[1] = ""
ItemObj.SetFamily(Item[1])
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_SOURCE_SECTION_FAMILY_INVALID %
(Item[1]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
if len(Item) >= 1:
#
# Validate file name exist.
#
FullFileName = os.path.normpath(
os.path.realpath(
os.path.join(GlobalData.gINF_MODULE_DIR, Item[0])))
if not (ValidFile(FullFileName) or ValidFile(Item[0])):
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_FILELIST_EXIST % (Item[0]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
#
# Validate file exist/format.
#
if IsValidPath(Item[0], GlobalData.gINF_MODULE_DIR):
IsValidFileFlag = True
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FILE_NOT_EXIST_OR_NAME_INVALID %
(Item[0]),
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
return False
if IsValidFileFlag:
ItemObj.SetSourceFileName(Item[0])
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_SOURCES_SECTION_CONTENT_ERROR,
File=CurrentLineOfItem[2],
Line=CurrentLineOfItem[1],
ExtraData=CurrentLineOfItem[0])
return ItemObj
def SetPcds(self, PcdContent, KeysList=None, PackageInfo=None):
if GlobalData.gIS_BINARY_INF:
self.SetAsBuildPcds(PcdContent, KeysList, PackageInfo)
return True
#
# Validate Arch
#
SupArchList = []
SupArchDict = {}
PcdTypeItem = ''
for (PcdTypeItem1, ArchItem, LineNo) in KeysList:
SupArchList, SupArchDict = ValidateArch(ArchItem, PcdTypeItem1, LineNo, SupArchDict, SupArchList)
#
# Validate PcdType
#
if (PcdTypeItem1 == '' or PcdTypeItem1 is None):
return False
else:
if not IsValidPcdType(PcdTypeItem1):
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_PCD_SECTION_TYPE_ERROR % (DT.PCD_USAGE_TYPE_LIST_OF_MODULE),
File=GlobalData.gINF_MODULE_NAME,
Line=LineNo,
ExtraData=PcdTypeItem1)
return False
PcdTypeItem = PcdTypeItem1
for PcdItem in PcdContent:
PcdItemObj = InfPcdItem()
CommentList = PcdItem[1]
CurrentLineOfPcdItem = PcdItem[2]
PcdItem = PcdItem[0]
if CommentList is not None and len(CommentList) != 0:
PcdItemObj = ParsePcdComment(CommentList, PcdTypeItem, PcdItemObj)
else:
CommentItemIns = InfPcdItemCommentContent()
CommentItemIns.SetUsageItem(DT.ITEM_UNDEFINED)
PcdItemObj.SetHelpStringList([CommentItemIns])
if len(PcdItem) >= 1 and len(PcdItem) <= 3:
PcdItemObj = SetPcdName(PcdItem, CurrentLineOfPcdItem, PcdItemObj)
if len(PcdItem) >= 2 and len(PcdItem) <= 3:
#
# Contain PcdName and Value, validate value.
#
if IsValidPcdValue(PcdItem[1]) or PcdItem[1].strip() == "":
PcdItemObj.SetDefaultValue(PcdItem[1])
else:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_PCD_VALUE_INVALID,
File=CurrentLineOfPcdItem[2],
Line=CurrentLineOfPcdItem[1],
ExtraData=PcdItem[1])
if len(PcdItem) == 3:
#
# Contain PcdName, value, and FeatureFlag express
#
#
# Validate Feature Flag Express
#
if PcdItem[2].strip() == '':
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_MISSING,
File=CurrentLineOfPcdItem[2],
Line=CurrentLineOfPcdItem[1],
ExtraData=CurrentLineOfPcdItem[0])
#
# Validate FFE
#
FeatureFlagRtv = IsValidFeatureFlagExp(PcdItem[2].strip())
if not FeatureFlagRtv[0]:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_FEATURE_FLAG_EXP_SYNTAX_INVLID % (FeatureFlagRtv[1]),
File=CurrentLineOfPcdItem[2],
Line=CurrentLineOfPcdItem[1],
ExtraData=CurrentLineOfPcdItem[0])
PcdItemObj.SetFeatureFlagExp(PcdItem[2])
if len(PcdItem) < 1 or len(PcdItem) > 3:
Logger.Error("InfParser",
ToolError.FORMAT_INVALID,
ST.ERR_INF_PARSER_PCD_SECTION_CONTENT_ERROR,
File=CurrentLineOfPcdItem[2],
Line=CurrentLineOfPcdItem[1],
ExtraData=CurrentLineOfPcdItem[0])
return False
if PcdTypeItem.upper != DT.TAB_INF_FEATURE_PCD.upper():
PcdItemObj.SetSupportArchList(SupArchDict[PcdTypeItem])
else:
PcdItemObj.SetSupportArchList(SupArchList)
if (PcdTypeItem, PcdItemObj) in self.Pcds:
PcdsList = self.Pcds[PcdTypeItem, PcdItemObj]
PcdsList.append(PcdItemObj)
self.Pcds[PcdTypeItem, PcdItemObj] = PcdsList
else:
PcdsList = []
PcdsList.append(PcdItemObj)
self.Pcds[PcdTypeItem, PcdItemObj] = PcdsList
return True