class CliConfiguration(EepromModel):
""" Models the cli configuration. These values are set by the OpenMotics daemon at startup. """
auto_response = EepromByte((0, 11))
auto_response_OL = EepromByte((0, 18))
echo = EepromByte((0, 12))
start_cli_api = EepromByte((0, 13))
auto_init = EepromByte((0, 14))
class ScheduledActionConfiguration(EepromModel):
""" Models the scheduled actions. The maximum number of scheduled actions is 102. """
id = EepromId(102)
hour = EepromByte(lambda mid: (113 + (mid / 51), 5 * (mid % 51) + 0))
minute = EepromByte(lambda mid: (113 + (mid / 51), 5 * (mid % 51) + 1))
day = EepromByte(lambda mid: (113 + (mid / 51), 5 * (mid % 51) + 2))
# day's 8th byte -> one time or reschedule
action = EepromActions(1, lambda mid: (113 + (mid / 51), 5 *
(mid % 51) + 3))
class ShutterConfiguration(EepromModel):
""" Models a shutter. The maximum number of shutters is 120 (30 modules), the actual number of
shutters is 4 times the number of shutter modules (eeprom address 0, 3).
"""
id = EepromId(240, address=EepromAddress(0, 3, 1), multiplier=4)
timer_up = EepromByte(page_per_module(4, 33, 177, 2))
timer_down = EepromByte(page_per_module(4, 33, 178, 2))
up_down_config = EepromByte(page_per_module(4, 33, 185, 1))
name = EepromString(16, page_per_module(4, 33, 189, 16))
group_1 = EepromByte(lambda mid: (63, (mid * 2) + 0))
group_2 = EepromByte(lambda mid: (63, (mid * 2) + 1))
room = EextByte()
class InputConfiguration(EepromModel):
""" Models an input. The maximum number of inputs is 240 (30 modules), the actual number of
inputs is 8 times the number of input modules (eeprom address 0, 1).
"""
id = EepromId(240, address=EepromAddress(0, 1, 1), multiplier=8)
module_type = EepromString(1, lambda mid: (2 + mid / 8, 0), read_only=True)
name = EepromString(
8,
per_module(
8, lambda mid, iid: (115 + (mid / 4), 64 * (mid % 4) + 8 * iid)))
action = EepromByte(page_per_module(8, 2, 4, 1))
basic_actions = EepromActions(15, page_per_module(8, 2, 12, 30))
invert = EepromByte(lambda mid: (32, mid))
room = EextByte()
can = EepromString(1, lambda mid: (2 + mid / 8, 252), read_only=True)
class RTD10CoolingConfiguration(EepromModel):
""" Configuration for RTD-10 when in cooling mode. """
id = EepromId(32)
temp_setpoint_output = EepromByte(lambda mid: (217, 200 + mid))
ventilation_speed_output = EepromByte(lambda mid: (218, mid))
ventilation_speed_value = EepromByte(lambda mid: (218, 64 + mid))
mode_output = EepromByte(lambda mid: (219, mid))
mode_value = EepromByte(lambda mid: (219, 64 + mid))
on_off_output = EepromByte(lambda mid: (219, 100 + mid))
poke_angle_output = EepromByte(lambda mid: (220, mid))
poke_angle_value = EepromByte(lambda mid: (220, 64 + mid))
room = EextByte()
class RTD10HeatingConfiguration(EepromModel):
""" Configuration for RTD-10 when in heating mode. """
id = EepromId(32)
temp_setpoint_output = EepromByte(lambda mid: (213, 200 + mid))
ventilation_speed_output = EepromByte(lambda mid: (214, mid))
ventilation_speed_value = EepromByte(lambda mid: (214, 64 + mid))
mode_output = EepromByte(lambda mid: (215, mid))
mode_value = EepromByte(lambda mid: (215, 64 + mid))
on_off_output = EepromByte(lambda mid: (215, 100 + mid))
poke_angle_output = EepromByte(lambda mid: (216, mid))
poke_angle_value = EepromByte(lambda mid: (216, 64 + mid))
room = EextByte()
class CanLedConfiguration(EepromModel):
""" Models a CAN LED configuration. Each configuration defines the CAN LED that will be driven
and the the function to drive the LED. The LED function will be activated when:
the number of lights on is 0 (id = 0), the number of lights on is greater than 0 (id = 1), ...,
the number of lights on is greater than 14 (id = 15), the number of outputs on is 0 (id = 16),
ther number of outputs is greater than 0 (id = 17), the number of outputs on is greater than 14
(id = 31). """
id = EepromId(32)
can_led_1_id = EepromByte(gen_address(229, 32, 0))
can_led_1_function = EepromEnum(gen_address(229, 32, 1),
get_led_functions())
can_led_2_id = EepromByte(gen_address(229, 32, 2))
can_led_2_function = EepromEnum(gen_address(229, 32, 3),
get_led_functions())
can_led_3_id = EepromByte(gen_address(229, 32, 4))
can_led_3_function = EepromEnum(gen_address(229, 32, 5),
get_led_functions())
can_led_4_id = EepromByte(gen_address(229, 32, 6))
can_led_4_function = EepromEnum(gen_address(229, 32, 7),
get_led_functions())
room = EextByte()
class OutputConfiguration(EepromModel):
"""
Models an output. The maximum number of inputs is 240 (30 modules), the actual number of
outputs is 8 times the number of output modules (eeprom address 0, 2).
"""
id = EepromId(240, address=EepromAddress(0, 2, 1), multiplier=8)
module_type = EepromString(1,
lambda mid: (33 + mid / 8, 0),
read_only=True,
shared=True)
name = EepromString(16, page_per_module(8, 33, 20, 16))
timer = EepromWord(page_per_module(8, 33, 4, 2))
floor = EepromByte(page_per_module(8, 33, 157, 1))
type = EepromByte(page_per_module(8, 33, 149, 1))
can_led_1_id = EepromByte(gen_address(221, 32, 0))
can_led_1_function = EepromEnum(gen_address(221, 32, 1),
get_led_functions())
can_led_2_id = EepromByte(gen_address(221, 32, 2))
can_led_2_function = EepromEnum(gen_address(221, 32, 3),
get_led_functions())
can_led_3_id = EepromByte(gen_address(221, 32, 4))
can_led_3_function = EepromEnum(gen_address(221, 32, 5),
get_led_functions())
can_led_4_id = EepromByte(gen_address(221, 32, 6))
can_led_4_function = EepromEnum(gen_address(221, 32, 7),
get_led_functions())
room = EextByte()
class ModuleConfiguration(EepromModel):
""" Models the global module configuration. """
nr_input_modules = EepromByte((0, 1), read_only=True)
nr_output_modules = EepromByte((0, 2), read_only=True)
enable_thermostat_16 = EepromByte((0, 15))
class GlobalThermostatConfiguration(EepromModel):
""" The global thermostat configuration. """
outside_sensor = EepromByte((0, 16))
threshold_temp = EepromTemp((0, 17))
pump_delay = EepromByte((0, 19))
switch_to_heating_output_0 = EepromByte((199, 0))
switch_to_heating_value_0 = EepromByte((199, 1))
switch_to_heating_output_1 = EepromByte((199, 2))
switch_to_heating_value_1 = EepromByte((199, 3))
switch_to_heating_output_2 = EepromByte((199, 4))
switch_to_heating_value_2 = EepromByte((199, 5))
switch_to_heating_output_3 = EepromByte((199, 6))
switch_to_heating_value_3 = EepromByte((199, 7))
switch_to_cooling_output_0 = EepromByte((199, 8))
switch_to_cooling_value_0 = EepromByte((199, 9))
switch_to_cooling_output_1 = EepromByte((199, 10))
switch_to_cooling_value_1 = EepromByte((199, 11))
switch_to_cooling_output_2 = EepromByte((199, 12))
switch_to_cooling_value_2 = EepromByte((199, 13))
switch_to_cooling_output_3 = EepromByte((199, 14))
switch_to_cooling_value_3 = EepromByte((199, 15))
class DimmerConfiguration(EepromModel):
""" Models the global dimmer configuration. """
min_dim_level = EepromByte((0, 5))
dim_step = EepromByte((0, 6))
dim_wait_cycle = EepromByte((0, 7))
dim_memory = EepromByte((0, 9))
class PulseCounterConfiguration(EepromModel):
""" Models a pulse counter. The maximum number of pulse counters is 24. """
id = EepromId(24)
name = EepromString(16, lambda mid: (98 + (mid / 16), 16 * (mid % 16)))
input = EepromByte(lambda mid: (0, 160 + mid))
room = EextByte()
class GlobalRTD10Configuration(EepromModel):
""" The global RTD-10 configuration. """
output_value_heating_16 = EepromByte((213, 24))
output_value_heating_16_5 = EepromByte((213, 25))
output_value_heating_17 = EepromByte((213, 26))
output_value_heating_17_5 = EepromByte((213, 27))
output_value_heating_18 = EepromByte((213, 28))
output_value_heating_18_5 = EepromByte((213, 29))
output_value_heating_19 = EepromByte((213, 30))
output_value_heating_19_5 = EepromByte((213, 31))
output_value_heating_20 = EepromByte((213, 32))
output_value_heating_20_5 = EepromByte((213, 33))
output_value_heating_21 = EepromByte((213, 34))
output_value_heating_21_5 = EepromByte((213, 35))
output_value_heating_22 = EepromByte((213, 36))
output_value_heating_22_5 = EepromByte((213, 37))
output_value_heating_23 = EepromByte((213, 38))
output_value_heating_23_5 = EepromByte((213, 39))
output_value_heating_24 = EepromByte((213, 40))
output_value_cooling_16 = EepromByte((217, 24))
output_value_cooling_16_5 = EepromByte((217, 25))
output_value_cooling_17 = EepromByte((217, 26))
output_value_cooling_17_5 = EepromByte((217, 27))
output_value_cooling_18 = EepromByte((217, 28))
output_value_cooling_18_5 = EepromByte((217, 29))
output_value_cooling_19 = EepromByte((217, 30))
output_value_cooling_19_5 = EepromByte((217, 31))
output_value_cooling_20 = EepromByte((217, 32))
output_value_cooling_20_5 = EepromByte((217, 33))
output_value_cooling_21 = EepromByte((217, 34))
output_value_cooling_21_5 = EepromByte((217, 35))
output_value_cooling_22 = EepromByte((217, 36))
output_value_cooling_22_5 = EepromByte((217, 37))
output_value_cooling_23 = EepromByte((217, 38))
output_value_cooling_23_5 = EepromByte((217, 39))
output_value_cooling_24 = EepromByte((217, 40))
class CoolingPumpGroupConfiguration(EepromModel):
""" Models a pump group for cooling. The maximum number of pump groups is 8. """
id = EepromId(8)
outputs = EepromCSV(32, lambda mid: (202, mid * 32))
output = EepromByte(lambda mid: (203, mid))
room = EextByte()
class CoolingConfiguration(EepromModel):
""" Models a thermostat in cooling mode. The maximum number of thermostats is 32. """
id = EepromId(32)
name = EepromString(16, lambda mid: (204 + (mid / 16), 16 * (mid % 16)))
setp0 = EepromTemp(lambda mid: (201, 32 + mid))
setp1 = EepromTemp(lambda mid: (201, 64 + mid))
setp2 = EepromTemp(lambda mid: (201, 96 + mid))
setp3 = EepromTemp(lambda mid: (201, 128 + mid))
setp4 = EepromTemp(lambda mid: (201, 160 + mid))
setp5 = EepromTemp(lambda mid: (201, 192 + mid))
sensor = EepromByte(lambda mid: (203, 8 + mid))
output0 = EepromByte(lambda mid: (201, mid))
output1 = EepromByte(lambda mid: (201, 224 + mid))
pid_p = EepromByte(lambda mid: (200, 4 * mid))
pid_i = EepromByte(lambda mid: (200, (4 * mid) + 1))
pid_d = EepromByte(lambda mid: (200, (4 * mid) + 2))
pid_int = EepromByte(lambda mid: (200, (4 * mid) + 3))
permanent_manual = EepromIBool(lambda mid: (195, 64 + mid))
auto_mon = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 0))),
('start_d1', EepromTime(lambda mid: (206, (4 * mid) + 0))),
('stop_d1', EepromTime(lambda mid: (206, (4 * mid) + 1))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 0))),
('start_d2', EepromTime(lambda mid: (206, (4 * mid) + 2))),
('stop_d2', EepromTime(lambda mid: (206, (4 * mid) + 3))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 0)))
])
auto_tue = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 32))),
('start_d1', EepromTime(lambda mid: (206, (4 * mid) + 128))),
('stop_d1', EepromTime(lambda mid: (206, (4 * mid) + 129))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 32))),
('start_d2', EepromTime(lambda mid: (206, (4 * mid) + 130))),
('stop_d2', EepromTime(lambda mid: (206, (4 * mid) + 131))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 32)))
])
auto_wed = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 64))),
('start_d1', EepromTime(lambda mid: (207, (4 * mid) + 0))),
('stop_d1', EepromTime(lambda mid: (207, (4 * mid) + 1))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 64))),
('start_d2', EepromTime(lambda mid: (207, (4 * mid) + 2))),
('stop_d2', EepromTime(lambda mid: (207, (4 * mid) + 3))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 64)))
])
auto_thu = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 96))),
('start_d1', EepromTime(lambda mid: (207, (4 * mid) + 128))),
('stop_d1', EepromTime(lambda mid: (207, (4 * mid) + 129))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 96))),
('start_d2', EepromTime(lambda mid: (207, (4 * mid) + 130))),
('stop_d2', EepromTime(lambda mid: (207, (4 * mid) + 131))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 96)))
])
auto_fri = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 128))),
('start_d1', EepromTime(lambda mid: (208, (4 * mid) + 0))),
('stop_d1', EepromTime(lambda mid: (208, (4 * mid) + 1))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 128))),
('start_d2', EepromTime(lambda mid: (208, (4 * mid) + 2))),
('stop_d2', EepromTime(lambda mid: (208, (4 * mid) + 3))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 128)))
])
auto_sat = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 160))),
('start_d1', EepromTime(lambda mid: (208, (4 * mid) + 128))),
('stop_d1', EepromTime(lambda mid: (208, (4 * mid) + 129))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 160))),
('start_d2', EepromTime(lambda mid: (208, (4 * mid) + 130))),
('stop_d2', EepromTime(lambda mid: (208, (4 * mid) + 131))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 160)))
])
auto_sun = CompositeDataType([
('temp_n', EepromTemp(lambda mid: (212, mid + 192))),
('start_d1', EepromTime(lambda mid: (209, (4 * mid) + 0))),
('stop_d1', EepromTime(lambda mid: (209, (4 * mid) + 1))),
('temp_d1', EepromTemp(lambda mid: (210, mid + 192))),
('start_d2', EepromTime(lambda mid: (209, (4 * mid) + 2))),
('stop_d2', EepromTime(lambda mid: (209, (4 * mid) + 3))),
('temp_d2', EepromTemp(lambda mid: (211, mid + 192)))
])
room = EextByte()
class ShutterGroupConfiguration(EepromModel):
""" Models a group of shutters. """
id = EepromId(30)
timer_up = EepromByte(lambda mid: (64, (mid * 2) + 0))
timer_down = EepromByte(lambda mid: (64, (mid * 2) + 1))
room = EextByte()