Ejemplo n.º 1
0
 def hid_send_encrypt(self, msg):
     sha256_byte_len = 32
     reply = ""
     try:
         encryption_key, authentication_key = derive_keys(self.password)
         msg = EncodeAES_bytes(encryption_key, msg)
         hmac_digest = hmac_oneshot(authentication_key, msg, hashlib.sha256)
         authenticated_msg = base64.b64encode(msg + hmac_digest)
         reply = self.hid_send_plain(authenticated_msg)
         if 'ciphertext' in reply:
             b64_unencoded = bytes(
                 base64.b64decode(''.join(reply["ciphertext"])))
             reply_hmac = b64_unencoded[-sha256_byte_len:]
             hmac_calculated = hmac_oneshot(
                 authentication_key, b64_unencoded[:-sha256_byte_len],
                 hashlib.sha256)
             if not hmac.compare_digest(reply_hmac, hmac_calculated):
                 raise Exception("Failed to validate HMAC")
             reply = DecodeAES_bytes(encryption_key,
                                     b64_unencoded[:-sha256_byte_len])
             reply = to_string(reply, 'utf8')
             reply = json.loads(reply)
         if 'error' in reply:
             self.password = None
     except Exception as e:
         print_error('Exception caught ' + repr(e))
     return reply
Ejemplo n.º 2
0
 def close_wallet(self):
     print_error("trezor: clear session")
     if self.client:
         self.client.clear_session()
         self.client.transport.close()
         self.client = None
     self.wallet = None
Ejemplo n.º 3
0
 def close_wallet(self):
     print_error("trezor: clear session")
     if self.client:
         self.client.clear_session()
         self.client.transport.close()
         self.client = None
     self.wallet = None
Ejemplo n.º 4
0
def parse_proposals_subscription_result(results):
    """Parse the proposals subscription response."""
    proposals = []
    for k, result in results.items():
        kwargs = {
            'proposal_name': result['Name'],
            'proposal_url': result['URL'],
            'start_block': int(result['BlockStart']),
            'end_block': int(result['BlockEnd']),
            'payment_amount': result['MonthlyPayment'],
            'address': result['PaymentAddress']
        }

        fee_txid_key = 'FeeTXHash' if result.get('FeeTXHash') else 'FeeHash'
        kwargs['fee_txid'] = result[fee_txid_key]
        yes_count_key = 'YesCount' if result.get('YesCount') else 'Yeas'
        kwargs['yes_count'] = result[yes_count_key]
        no_count_key = 'NoCount' if result.get('NoCount') else 'Nays'
        kwargs['no_count'] = result[no_count_key]

        payment_amount = Decimal(str(kwargs['payment_amount']))
        kwargs['payment_amount'] = pow(10, 8) * payment_amount
        proposals.append(BudgetProposal.from_dict(kwargs))

    print_error('Received updated budget proposal information (%d proposals)' %
                len(proposals))
    return proposals
Ejemplo n.º 5
0
    def start_new_window(self, path, uri, app_is_starting=False):
        '''Raises the window for the wallet if it is open.  Otherwise
        opens the wallet and creates a new window for it'''
        try:
            wallet = self.daemon.load_wallet(path, None)
        except BaseException as e:
            traceback.print_exc(file=sys.stdout)
            d = QMessageBox(QMessageBox.Warning, _('Error'),
                            _('Cannot load wallet') + ' (1):\n' + str(e))
            d.exec_()
            if app_is_starting:
                # do not return so that the wizard can appear
                wallet = None
            else:
                return
        if not wallet:
            storage = WalletStorage(path, manual_upgrades=True)
            wizard = InstallWizard(self.config, self.app, self.plugins, storage)
            try:
                wallet = wizard.run_and_get_wallet(self.daemon.get_wallet)
            except UserCancelled:
                pass
            except GoBack as e:
                print_error('[start_new_window] Exception caught (GoBack)', e)
            except (WalletFileException, BitcoinException) as e:
                traceback.print_exc(file=sys.stderr)
                d = QMessageBox(QMessageBox.Warning, _('Error'),
                                _('Cannot load wallet') + ' (2):\n' + str(e))
                d.exec_()
                return
            finally:
                wizard.terminate()
            if not wallet:
                return

            if not self.daemon.get_wallet(wallet.storage.path):
                # wallet was not in memory
                wallet.start_threads(self.daemon.network)
                self.daemon.add_wallet(wallet)
        try:
            for w in self.windows:
                if w.wallet.storage.path == wallet.storage.path:
                    w.bring_to_top()
                    return
            w = self.create_window_for_wallet(wallet)
        except BaseException as e:
            traceback.print_exc(file=sys.stdout)
            d = QMessageBox(QMessageBox.Warning, _('Error'),
                            _('Cannot create window for wallet') + ':\n' + str(e))
            d.exec_()
            return
        if uri:
            w.pay_to_URI(uri)
        w.bring_to_top()
        w.setWindowState(w.windowState() & ~QtCore.Qt.WindowMinimized | QtCore.Qt.WindowActive)

        # this will activate the window
        w.activateWindow()
        return w
Ejemplo n.º 6
0
    def start_new_window(self, path, uri, app_is_starting=False):
        '''Raises the window for the wallet if it is open.  Otherwise
        opens the wallet and creates a new window for it'''
        try:
            wallet = self.daemon.load_wallet(path, None)
        except BaseException as e:
            traceback.print_exc(file=sys.stdout)
            d = QMessageBox(QMessageBox.Warning, _('Error'),
                            _('Cannot load wallet') + ' (1):\n' + str(e))
            d.exec_()
            if app_is_starting:
                # do not return so that the wizard can appear
                wallet = None
            else:
                return
        if not wallet:
            storage = WalletStorage(path, manual_upgrades=True)
            wizard = InstallWizard(self.config, self.app, self.plugins, storage)
            try:
                wallet = wizard.run_and_get_wallet(self.daemon.get_wallet)
            except UserCancelled:
                pass
            except GoBack as e:
                print_error('[start_new_window] Exception caught (GoBack)', e)
            except (WalletFileException, BitcoinException) as e:
                traceback.print_exc(file=sys.stderr)
                d = QMessageBox(QMessageBox.Warning, _('Error'),
                                _('Cannot load wallet') + ' (2):\n' + str(e))
                d.exec_()
                return
            finally:
                wizard.terminate()
            if not wallet:
                return

            if not self.daemon.get_wallet(wallet.storage.path):
                # wallet was not in memory
                wallet.start_threads(self.daemon.network)
                self.daemon.add_wallet(wallet)
        try:
            for w in self.windows:
                if w.wallet.storage.path == wallet.storage.path:
                    w.bring_to_top()
                    return
            w = self.create_window_for_wallet(wallet)
        except BaseException as e:
            traceback.print_exc(file=sys.stdout)
            d = QMessageBox(QMessageBox.Warning, _('Error'),
                            _('Cannot create window for wallet') + ':\n' + str(e))
            d.exec_()
            return
        if uri:
            w.pay_to_URI(uri)
        w.bring_to_top()
        w.setWindowState(w.windowState() & ~QtCore.Qt.WindowMinimized | QtCore.Qt.WindowActive)

        # this will activate the window
        w.activateWindow()
        return w
Ejemplo n.º 7
0
 def give_error(self, message, clear_client=False):
     print_error(message)
     if not self.signing:
         self.handler.show_error(message)
     else:
         self.signing = False
     if clear_client:
         self.client = None
     raise Exception(message)
 def submit_thread():
     for i, (proposal_name, txid) in enumerate(self.unsubmitted_proposals):
         errmsg, success = self.parent.masternode_manager.submit_proposal(proposal_name, save=False)
         results[i] = (proposal_name, errmsg, success)
         if success:
             print_error('Sucessfully submitted proposal "%s"' % proposal_name)
         else:
             print_error('Failed to submit proposal "%s": %s' % (proposal_name, errmsg))
     return results
Ejemplo n.º 9
0
 def give_error(self, message, clear_client = False):
     print_error(message)
     if not self.signing:
         self.handler.show_error(message)
     else:
         self.signing = False
     if clear_client:
         self.client = None
     raise Exception(message)
 def submit_thread():
     for i, (proposal_name, txid) in enumerate(self.unsubmitted_proposals):
         errmsg, success = self.parent.masternode_manager.submit_proposal(proposal_name, save=False)
         results[i] = (proposal_name, errmsg, success)
         if success:
             print_error('Sucessfully submitted proposal "%s"' % proposal_name)
         else:
             print_error('Failed to submit proposal "%s": %s' % (proposal_name, errmsg))
     return results
Ejemplo n.º 11
0
 def give_error(self, message, clear_client=False):
     print_error(message)
     if not self.signing:
         QMessageBox.warning(QDialog(), _("Warning"), _(message), _("OK"))
     else:
         self.signing = False
     if clear_client and self.client is not None:
         self.client.bad = True
         self.device_checked = False
     raise Exception(message)
Ejemplo n.º 12
0
 def load_theme(self):
     """Load theme retrieved from wallet file."""
     try:
         theme_prefix, theme_path = self.themes[self.theme_name]
     except KeyError:
         util.print_error("Theme not found!", self.theme_name)
         return
     full_theme_path = "%s/%s/style.css" % (theme_prefix, theme_path)
     with open(full_theme_path) as style_file:
         qApp.setStyleSheet(style_file.read())
Ejemplo n.º 13
0
 def give_error(self, message, clear_client=False):
     print_error(message)
     if not self.signing:
         QMessageBox.warning(QDialog(), _('Warning'), _(message), _('OK'))
     else:
         self.signing = False
     if clear_client and self.client is not None:
         self.client.bad = True
         self.device_checked = False
     raise Exception(message)
Ejemplo n.º 14
0
 def load_theme(self):
     """Load theme retrieved from wallet file."""
     try:
         theme_prefix, theme_path = self.themes[self.theme_name]
     except KeyError:
         util.print_error("Theme not found!", self.theme_name)
         return
     full_theme_path = "%s/%s/style.css" % (theme_prefix, theme_path)
     with open(full_theme_path) as style_file:
         qApp.setStyleSheet(style_file.read())
Ejemplo n.º 15
0
 def hid_send_encrypt(self, msg):
     reply = ""
     try:
         secret = Hash(self.password)
         msg = EncodeAES(secret, msg)
         reply = self.hid_send_plain(msg)
         if 'ciphertext' in reply:
             reply = DecodeAES(secret, ''.join(reply["ciphertext"]))
             reply = json.loads(reply)
         if 'error' in reply:
             self.password = None
     except Exception as e:
         print_error('Exception caught ' + str(e))
     return reply
Ejemplo n.º 16
0
 def set_dark_theme_if_needed(self):
     use_dark_theme = self.config.get('qt_gui_color_theme',
                                      'default') == 'dark'
     if use_dark_theme:
         try:
             import qdarkstyle
             self.app.setStyleSheet(qdarkstyle.load_stylesheet_pyqt5())
         except BaseException as e:
             use_dark_theme = False
             print_error('Error setting dark theme: {}'.format(e))
     # Even if we ourselves don't set the dark theme,
     # the OS/window manager/etc might set *a dark theme*.
     # Hence, try to choose colors accordingly:
     ColorScheme.update_from_widget(QWidget(), force_dark=use_dark_theme)
Ejemplo n.º 17
0
 def hid_send_encrypt(self, msg):
     reply = ""
     try:
         secret = Hash(self.password)
         msg = EncodeAES(secret, msg)
         reply = self.hid_send_plain(msg)
         if 'ciphertext' in reply:
             reply = DecodeAES(secret, ''.join(reply["ciphertext"]))
             reply = to_string(reply, 'utf8')
             reply = json.loads(reply)
         if 'error' in reply:
             self.password = None
     except Exception as e:
         print_error('Exception caught ' + str(e))
     return reply
Ejemplo n.º 18
0
    def create_proposal_tx(self, proposal_name, password, save=True):
        """Create a fee transaction for proposal_name."""
        proposal = self.get_proposal(proposal_name)
        if proposal.fee_txid:
            print_error('Warning: Proposal "%s" already has a fee tx: %s' %
                        (proposal_name, proposal.fee_txid))
        if proposal.submitted:
            raise Exception('Proposal has already been submitted')

        h = bitcoin.hash_decode(proposal.get_hash()).encode('hex')
        script = '6a20' + h  # OP_RETURN hash
        outputs = [(bitcoin.TYPE_SCRIPT, script.decode('hex'), BUDGET_FEE_TX)]
        tx = self.wallet.mktx(outputs, password, self.config)
        proposal.fee_txid = tx.hash()
        if save:
            self.save()
        return tx
Ejemplo n.º 19
0
 def use_tor_proxy(self, use_it):
     if not use_it:
         self.proxy_cb.setChecked(False)
     else:
         socks5_mode_index = self.proxy_mode.findText('SOCKS5')
         if socks5_mode_index == -1:
             print_error("[network_dialog] can't find proxy_mode 'SOCKS5'")
             return
         self.proxy_mode.setCurrentIndex(socks5_mode_index)
         self.proxy_host.setText("127.0.0.1")
         self.proxy_port.setText(str(self.tor_proxy[1]))
         self.proxy_user.setText("")
         self.proxy_password.setText("")
         self.tor_cb.setChecked(True)
         self.proxy_cb.setChecked(True)
     self.check_disable_proxy(use_it)
     self.set_proxy()
Ejemplo n.º 20
0
 def run(self):
     self.is_running = True
     while self.is_running:
         if not self.keyhash:
             time.sleep(2)
             continue
         if not self.message:
             try:
                 self.message = server.get(self.keyhash)
             except Exception as e:
                 util.print_error("cannot contact cosigner pool")
                 time.sleep(30)
                 continue
             if self.message:
                 self.parent.win.emit(SIGNAL("cosigner:receive"))
         # poll every 30 seconds
         time.sleep(30)
Ejemplo n.º 21
0
 def run(self):
     self.is_running = True
     while self.is_running:
         if not self.keyhash:
             time.sleep(2)
             continue
         if not self.message:
             try:
                 self.message = server.get(self.keyhash)
             except Exception as e:
                 util.print_error("cannot contact cosigner pool")
                 time.sleep(30)
                 continue
             if self.message:
                 self.parent.win.emit(SIGNAL("cosigner:receive"))
         # poll every 30 seconds
         time.sleep(30)
Ejemplo n.º 22
0
    def restore(self, t):

            if t == 'standard':
                text = self.enter_seed_dialog(MSG_ENTER_ANYTHING, None)
                if not text:
                    return
                if Wallet.is_xprv(text):
                    password = self.password_dialog()
                    wallet = Wallet.from_xprv(text, password, self.storage)
                elif Wallet.is_old_mpk(text):
                    wallet = Wallet.from_old_mpk(text, self.storage)
                elif Wallet.is_xpub(text):
                    wallet = Wallet.from_xpub(text, self.storage)
                elif Wallet.is_address(text):
                    wallet = Wallet.from_address(text, self.storage)
                elif Wallet.is_private_key(text):
                    password = self.password_dialog()
                    wallet = Wallet.from_private_key(text, password, self.storage)
                elif Wallet.is_seed(text):
                    password = self.password_dialog()
                    wallet = Wallet.from_seed(text, password, self.storage)
                else:
                    raise BaseException('unknown wallet type')

            elif re.match('(\d+)of(\d+)', t):
                n = int(re.match('(\d+)of(\d+)', t).group(2))
                key_list = self.multi_seed_dialog(n - 1)
                if not key_list:
                    return
                password = self.password_dialog() if any(map(lambda x: Wallet.is_seed(x) or Wallet.is_xprv(x), key_list)) else None
                wallet = Wallet.from_multisig(key_list, password, self.storage, t)

            else:
                self.storage.put('wallet_type', t, False)
                # call the constructor to load the plugin (side effect)
                Wallet(self.storage)
                wallet = always_hook('installwizard_restore', self, self.storage)
                if not wallet:
                    util.print_error("no wallet")
                    return

            # create first keys offline
            self.waiting_dialog(wallet.synchronize)

            return wallet
Ejemplo n.º 23
0
    def masternode_subscription_response(self, response):
        """Callback for when a masternode's status changes."""
        collateral = response['params'][0]
        mn = None
        for masternode in self.masternodes:
            if masternode.get_collateral_str() == collateral:
                mn = masternode
                break

        if not mn:
            return

        status = response['result']
        if status is None:
            status = False
        print_error('Received updated status for masternode %s: "%s"' %
                    (mn.alias, status))
        self.masternode_statuses[collateral] = status
Ejemplo n.º 24
0
 def hid_send_plain(self, msg):
     reply = ""
     try:
         serial_number = self.dbb_hid.get_serial_number_string()
         if "v2.0." in serial_number or "v1." in serial_number:
             hidBufSize = 4096
             self.dbb_hid.write('\0' + msg + '\0' * (hidBufSize - len(msg)))
             r = bytearray()
             while len(r) < hidBufSize:
                 r += bytearray(self.dbb_hid.read(hidBufSize))
         else:
             self.hid_send_frame(msg)
             r = self.hid_read_frame()
         r = r.rstrip(b' \t\r\n\0')
         r = r.replace(b"\0", b'')
         r = to_string(r, 'utf8')
         reply = json.loads(r)
     except Exception as e:
         print_error('Exception caught ' + str(e))
     return reply
Ejemplo n.º 25
0
 def hid_send_plain(self, msg):
     reply = ""
     try:
         serial_number = self.dbb_hid.get_serial_number_string()
         if "v2.0." in serial_number or "v1." in serial_number:
             hidBufSize = 4096
             self.dbb_hid.write('\0' + msg + '\0' * (hidBufSize - len(msg)))
             r = bytearray()
             while len(r) < hidBufSize:
                 r += bytearray(self.dbb_hid.read(hidBufSize))
         else:
             self.hid_send_frame(msg)
             r = self.hid_read_frame()
         r = r.rstrip(b' \t\r\n\0')
         r = r.replace(b"\0", b'')
         r = to_string(r, 'utf8')
         reply = json.loads(r)
     except Exception as e:
         print_error('Exception caught ' + str(e))
     return reply
Ejemplo n.º 26
0
    def start_new_window(self, path, uri):
        '''Raises the window for the wallet if it is open.  Otherwise
        opens the wallet and creates a new window for it.'''
        for w in self.windows:
            if w.wallet.storage.path == path:
                w.bring_to_top()
                break
        else:
            try:
                wallet = self.daemon.load_wallet(path, None)
            except BaseException as e:
                d = QMessageBox(QMessageBox.Warning, _('Error'),
                                'Cannot load wallet:\n' + str(e))
                d.exec_()
                return
            if not wallet:
                storage = WalletStorage(path, manual_upgrades=True)
                wizard = InstallWizard(self.config, self.app, self.plugins,
                                       storage)
                try:
                    wallet = wizard.run_and_get_wallet()
                except UserCancelled:
                    pass
                except GoBack as e:
                    print_error('[start_new_window] Exception caught (GoBack)',
                                e)
                wizard.terminate()
                if not wallet:
                    return
                wallet.start_threads(self.daemon.network)
                self.daemon.add_wallet(wallet)
            w = self.create_window_for_wallet(wallet)
        if uri:
            w.pay_to_URI(uri)
        w.bring_to_top()
        w.setWindowState(w.windowState() & ~QtCore.Qt.WindowMinimized
                         | QtCore.Qt.WindowActive)

        # this will activate the window
        w.activateWindow()
        return w
Ejemplo n.º 27
0
 def comserver_post_notification(self, payload):
     assert self.is_mobile_paired(), "unexpected mobile pairing error"
     url = 'https://digitalbitbox.com/smartverification/index.php'
     key_s = base64.b64decode(
         self.digitalbitbox_config[ENCRYPTION_PRIVKEY_KEY])
     args = 'c=data&s=0&dt=0&uuid=%s&pl=%s' % (
         self.digitalbitbox_config[CHANNEL_ID_KEY],
         EncodeAES_base64(
             key_s,
             json.dumps(payload).encode('ascii')).decode('ascii'),
     )
     try:
         text = Network.send_http_on_proxy(
             'post',
             url,
             body=args.encode('ascii'),
             headers={'content-type': 'application/x-www-form-urlencoded'})
         print_error('digitalbitbox reply from server', text)
     except Exception as e:
         self.handler.show_error(
             repr(e))  # repr because str(Exception()) == ''
Ejemplo n.º 28
0
    def import_masternode_conf_lines(self, conf_lines, password):
        """Import a list of MasternodeConfLine."""
        def already_have(line):
            for masternode in self.masternodes:
                # Don't let aliases collide.
                if masternode.alias == line.alias:
                    return True
                # Don't let outputs collide.
                if masternode.vin.get(
                        'prevout_hash') == line.txid and masternode.vin.get(
                            'prevout_n') == line.output_index:
                    return True
            return False

        num_imported = 0
        for conf_line in conf_lines:
            if already_have(conf_line):
                continue
            # Import delegate WIF key for signing last_ping.
            self.import_masternode_delegate(conf_line.wif)
            public_key = bitcoin.public_key_from_private_key(conf_line.wif)

            addr = conf_line.addr.split(':')
            addr = NetworkAddress(ip=addr[0], port=int(addr[1]))
            vin = {
                'prevout_hash': conf_line.txid,
                'prevout_n': conf_line.output_index
            }
            mn = MasternodeAnnounce(alias=conf_line.alias,
                                    vin=vin,
                                    delegate_key=public_key,
                                    addr=addr)
            self.add_masternode(mn)
            try:
                self.populate_masternode_output(mn.alias)
            except Exception as e:
                print_error(str(e))
            num_imported += 1

        return num_imported
Ejemplo n.º 29
0
 def get_xpub(self, bip32_path):
     self.checkDevice()
     # bip32_path is of the form 44'/5'/1'
     # S-L-O-W - we don't handle the fingerprint directly, so compute
     # it manually from the previous node
     # This only happens once so it's bearable
     #self.get_client() # prompt for the PIN before displaying the dialog if necessary
     #self.handler.show_message("Computing master public key")
     try:
         splitPath = bip32_path.split('/')
         if splitPath[0] == 'm':
             splitPath = splitPath[1:]
             bip32_path = bip32_path[2:]
         fingerprint = 0
         if len(splitPath) > 1:
             prevPath = "/".join(splitPath[0:len(splitPath) - 1])
             nodeData = self.dongleObject.getWalletPublicKey(prevPath)
             publicKey = compress_public_key(nodeData['publicKey'])
             h = hashlib.new('ripemd160')
             h.update(hashlib.sha256(publicKey).digest())
             fingerprint = unpack(">I", h.digest()[0:4])[0]
         nodeData = self.dongleObject.getWalletPublicKey(bip32_path)
         publicKey = compress_public_key(nodeData['publicKey'])
         depth = len(splitPath)
         lastChild = splitPath[len(splitPath) - 1].split('\'')
         if len(lastChild) == 1:
             childnum = int(lastChild[0])
         else:
             childnum = 0x80000000 | int(lastChild[0])
         xpub = bitcoin.serialize_xpub(0, str(nodeData['chainCode']),
                                       str(publicKey), depth,
                                       self.i4b(fingerprint),
                                       self.i4b(childnum))
         return xpub
     except Exception as e:
         print_error(e)
         return None
Ejemplo n.º 30
0
 def update_status(self, b):
     print_error('hw device status', b)
Ejemplo n.º 31
0
    def sign_transaction(self, tx, password):
        if tx.is_complete():
            return

        try:
            p2pkhTransaction = True
            derivations = self.get_tx_derivations(tx)
            inputhasharray = []
            hasharray = []
            pubkeyarray = []

            # Build hasharray from inputs
            for i, txin in enumerate(tx.inputs()):
                if txin['type'] == 'coinbase':
                    self.give_error("Coinbase not supported") # should never happen

                if txin['type'] != 'p2pkh':
                    p2pkhTransaction = False

                for x_pubkey in txin['x_pubkeys']:
                    if x_pubkey in derivations:
                        index = derivations.get(x_pubkey)
                        inputPath = "%s/%d/%d" % (self.get_derivation(), index[0], index[1])
                        inputHash = Hash(binascii.unhexlify(tx.serialize_preimage(i)))
                        hasharray_i = {'hash': to_hexstr(inputHash), 'keypath': inputPath}
                        hasharray.append(hasharray_i)
                        inputhasharray.append(inputHash)
                        break
                else:
                    self.give_error("No matching x_key for sign_transaction") # should never happen

            # Build pubkeyarray from outputs
            for o in tx.outputs():
                assert o.type == TYPE_ADDRESS
                info = tx.output_info.get(o.address)
                if info is not None:
                    index = info.address_index
                    changePath = self.get_derivation() + "/%d/%d" % index
                    changePubkey = self.derive_pubkey(index[0], index[1])
                    pubkeyarray_i = {'pubkey': changePubkey, 'keypath': changePath}
                    pubkeyarray.append(pubkeyarray_i)

            # Special serialization of the unsigned transaction for
            # the mobile verification app.
            # At the moment, verification only works for p2pkh transactions.
            if p2pkhTransaction:
                class CustomTXSerialization(Transaction):
                    @classmethod
                    def input_script(self, txin, estimate_size=False):
                        if txin['type'] == 'p2pkh':
                            return Transaction.get_preimage_script(txin)
                        if txin['type'] == 'p2sh':
                            # Multisig verification has partial support, but is disabled. This is the
                            # expected serialization though, so we leave it here until we activate it.
                            return '00' + push_script(Transaction.get_preimage_script(txin))
                        raise Exception("unsupported type %s" % txin['type'])
                tx_dbb_serialized = CustomTXSerialization(tx.serialize()).serialize_to_network()
            else:
                # We only need this for the signing echo / verification.
                tx_dbb_serialized = None

            # Build sign command
            dbb_signatures = []
            steps = math.ceil(1.0 * len(hasharray) / self.maxInputs)
            for step in range(int(steps)):
                hashes = hasharray[step * self.maxInputs : (step + 1) * self.maxInputs]

                msg = {
                    "sign": {
                        "data": hashes,
                        "checkpub": pubkeyarray,
                    },
                }
                if tx_dbb_serialized is not None:
                    msg["sign"]["meta"] = to_hexstr(Hash(tx_dbb_serialized))
                msg = json.dumps(msg).encode('ascii')
                dbb_client = self.plugin.get_client(self)

                if not dbb_client.is_paired():
                    raise Exception("Could not sign transaction.")

                reply = dbb_client.hid_send_encrypt(msg)
                if 'error' in reply:
                    raise Exception(reply['error']['message'])

                if 'echo' not in reply:
                    raise Exception("Could not sign transaction.")

                if self.plugin.is_mobile_paired() and tx_dbb_serialized is not None:
                    reply['tx'] = tx_dbb_serialized
                    self.plugin.comserver_post_notification(reply)

                if steps > 1:
                    self.handler.show_message(_("Signing large transaction. Please be patient ...") + "\n\n" +
                                              _("To continue, touch the Digital Bitbox's blinking light for 3 seconds.") + " " +
                                              _("(Touch {} of {})").format((step + 1), steps) + "\n\n" +
                                              _("To cancel, briefly touch the blinking light or wait for the timeout.") + "\n\n")
                else:
                    self.handler.show_message(_("Signing transaction...") + "\n\n" +
                                              _("To continue, touch the Digital Bitbox's blinking light for 3 seconds.") + "\n\n" +
                                              _("To cancel, briefly touch the blinking light or wait for the timeout."))

                # Send twice, first returns an echo for smart verification
                reply = dbb_client.hid_send_encrypt(msg)
                self.handler.finished()

                if 'error' in reply:
                    if reply["error"].get('code') in (600, 601):
                        # aborted via LED short touch or timeout
                        raise UserCancelled()
                    raise Exception(reply['error']['message'])

                if 'sign' not in reply:
                    raise Exception("Could not sign transaction.")

                dbb_signatures.extend(reply['sign'])

            # Fill signatures
            if len(dbb_signatures) != len(tx.inputs()):
                raise Exception("Incorrect number of transactions signed.") # Should never occur
            for i, txin in enumerate(tx.inputs()):
                num = txin['num_sig']
                for pubkey in txin['pubkeys']:
                    signatures = list(filter(None, txin['signatures']))
                    if len(signatures) == num:
                        break # txin is complete
                    ii = txin['pubkeys'].index(pubkey)
                    signed = dbb_signatures[i]
                    if 'recid' in signed:
                        # firmware > v2.1.1
                        recid = int(signed['recid'], 16)
                        s = binascii.unhexlify(signed['sig'])
                        h = inputhasharray[i]
                        pk = ecc.ECPubkey.from_sig_string(s, recid, h)
                        pk = pk.get_public_key_hex(compressed=True)
                    elif 'pubkey' in signed:
                        # firmware <= v2.1.1
                        pk = signed['pubkey']
                    if pk != pubkey:
                        continue
                    sig_r = int(signed['sig'][:64], 16)
                    sig_s = int(signed['sig'][64:], 16)
                    sig = ecc.der_sig_from_r_and_s(sig_r, sig_s)
                    sig = to_hexstr(sig) + '01'
                    tx.add_signature_to_txin(i, ii, sig)
        except UserCancelled:
            raise
        except BaseException as e:
            self.give_error(e, True)
        else:
            print_error("Transaction is_complete", tx.is_complete())
            tx.raw = tx.serialize()
Ejemplo n.º 32
0
def give_error(message):
    print_error(message)
    raise Exception(message)
Ejemplo n.º 33
0
# ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.

import webbrowser
import datetime

from electrum_dash.address_synchronizer import TX_HEIGHT_LOCAL
from .util import *
from electrum_dash.i18n import _
from electrum_dash.util import block_explorer_URL, profiler, print_error, TxMinedStatus

try:
    from electrum_dash.plot import plot_history, NothingToPlotException
except:
    print_error("qt/history_list: could not import electrum_dash.plot. This feature needs matplotlib to be installed.")
    plot_history = None

# note: this list needs to be kept in sync with another in kivy
TX_ICONS = [
    "unconfirmed.png",
    "warning.png",
    "unconfirmed.png",
    "offline_tx.png",
    "clock1.png",
    "clock2.png",
    "clock3.png",
    "clock4.png",
    "clock5.png",
    "confirmed.png",
]
 def sign_done(proposal, tx):
     print_error('proposal tx sign done: %s' % proposal.proposal_name)
     if tx:
         label = _('Budget Proposal Tx: ') + proposal.proposal_name
         self.parent.broadcast_transaction(tx, label)
         self.parent.masternode_manager.save()
Ejemplo n.º 35
0
import platform

from electrum_dash.plugin import BasePlugin, hook
from electrum_dash.gui.qt.util import WaitingDialog, EnterButton, WindowModalDialog
from electrum_dash.util import print_msg, print_error
from electrum_dash.i18n import _

from PyQt5.QtGui import *
from PyQt5.QtCore import *
from PyQt5.QtWidgets import (QComboBox, QGridLayout, QLabel, QPushButton)

try:
    import amodem.audio
    import amodem.main
    import amodem.config
    print_error('Audio MODEM is available.')
    amodem.log.addHandler(amodem.logging.StreamHandler(sys.stderr))
    amodem.log.setLevel(amodem.logging.INFO)
except ImportError:
    amodem = None
    print_error('Audio MODEM is not found.')


class Plugin(BasePlugin):

    def __init__(self, parent, config, name):
        BasePlugin.__init__(self, parent, config, name)
        if self.is_available():
            self.modem_config = amodem.config.slowest()
            self.library_name = {
                'Linux': 'libportaudio.so'
 def sign_done(proposal, tx):
     print_error('proposal tx sign done: %s' % proposal.proposal_name)
     if tx:
         label = _('Budget Proposal Tx: ') + proposal.proposal_name
         self.parent.broadcast_transaction(tx, label)
         self.parent.masternode_manager.save()
Ejemplo n.º 37
0
    def sign_transaction(self, tx, password):
        if tx.is_complete():
            return

        try:
            p2shTransaction = False
            derivations = self.get_tx_derivations(tx)
            inputhasharray = []
            hasharray = []
            pubkeyarray = []

            # Build hasharray from inputs
            for i, txin in enumerate(tx.inputs()):
                if txin['type'] == 'coinbase':
                    self.give_error(
                        "Coinbase not supported")  # should never happen

                if txin['type'] in ['p2sh']:
                    p2shTransaction = True

                for x_pubkey in txin['x_pubkeys']:
                    if x_pubkey in derivations:
                        index = derivations.get(x_pubkey)
                        inputPath = "%s/%d/%d" % (self.get_derivation(),
                                                  index[0], index[1])
                        inputHash = Hash(
                            tx.serialize_preimage(i).decode('hex'))
                        hasharray_i = {
                            'hash': inputHash.encode('hex'),
                            'keypath': inputPath
                        }
                        hasharray.append(hasharray_i)
                        inputhasharray.append(inputHash)
                        break
                else:
                    self.give_error("No matching x_key for sign_transaction"
                                    )  # should never happen

            # Sanity check
            if p2shTransaction:
                for txinput in tx.inputs():
                    if txinput['type'] != 'p2sh':
                        self.give_error(
                            "P2SH / regular input mixed in same transaction not supported"
                        )  # should never happen

            # Build pubkeyarray from outputs (unused because echo for smart verification not implemented)
            if not p2shTransaction:
                for _type, address, amount in tx.outputs():
                    assert _type == TYPE_ADDRESS
                    info = tx.output_info.get(address)
                    if info is not None:
                        index, xpubs, m = info
                        changePath = self.get_derivation() + "/%d/%d" % index
                        changePubkey = self.derive_pubkey(index[0], index[1])
                        pubkeyarray_i = {
                            'pubkey': changePubkey,
                            'keypath': changePath
                        }
                        pubkeyarray.append(pubkeyarray_i)

            # Build sign command
            dbb_signatures = []
            steps = math.ceil(1.0 * len(hasharray) / self.maxInputs)
            for step in range(int(steps)):
                hashes = hasharray[step * self.maxInputs:(step + 1) *
                                   self.maxInputs]

                msg = '{"sign": {"meta":"%s", "data":%s, "checkpub":%s} }' % \
                       (Hash(tx.serialize()).encode('hex'), json.dumps(hashes), json.dumps(pubkeyarray))

                dbb_client = self.plugin.get_client(self)

                if not dbb_client.is_paired():
                    raise Exception("Could not sign transaction.")

                reply = dbb_client.hid_send_encrypt(msg)

                if 'error' in reply:
                    raise Exception(reply['error']['message'])

                if 'echo' not in reply:
                    raise Exception("Could not sign transaction.")

                if steps > 1:
                    self.handler.show_message(_("Signing large transaction. Please be patient ...\r\n\r\n" \
                                                "To continue, touch the Digital Bitbox's blinking light for 3 seconds. " \
                                                "(Touch " + str(step + 1) + " of " + str(int(steps)) + ")\r\n\r\n" \
                                                "To cancel, briefly touch the blinking light or wait for the timeout.\r\n\r\n"))
                else:
                    self.handler.show_message(_("Signing transaction ...\r\n\r\n" \
                                                "To continue, touch the Digital Bitbox's blinking light for 3 seconds.\r\n\r\n" \
                                                "To cancel, briefly touch the blinking light or wait for the timeout."))

                reply = dbb_client.hid_send_encrypt(
                    msg
                )  # Send twice, first returns an echo for smart verification (not implemented)
                self.handler.clear_dialog()

                if 'error' in reply:
                    raise Exception(reply['error']['message'])

                if 'sign' not in reply:
                    raise Exception("Could not sign transaction.")

                dbb_signatures.extend(reply['sign'])

            # Fill signatures
            if len(dbb_signatures) <> len(tx.inputs()):
                raise Exception("Incorrect number of transactions signed."
                                )  # Should never occur
            for i, txin in enumerate(tx.inputs()):
                num = txin['num_sig']
                for pubkey in txin['pubkeys']:
                    signatures = filter(None, txin['signatures'])
                    if len(signatures) == num:
                        break  # txin is complete
                    ii = txin['pubkeys'].index(pubkey)
                    signed = dbb_signatures[i]
                    if 'recid' in signed:
                        # firmware > v2.1.1
                        recid = int(signed['recid'], 16)
                        s = signed['sig'].decode('hex')
                        h = inputhasharray[i]
                        pk = MyVerifyingKey.from_signature(s,
                                                           recid,
                                                           h,
                                                           curve=SECP256k1)
                        pk = point_to_ser(pk.pubkey.point, True).encode('hex')
                    elif 'pubkey' in signed:
                        # firmware <= v2.1.1
                        pk = signed['pubkey']
                    if pk != pubkey:
                        continue
                    sig_r = int(signed['sig'][:64], 16)
                    sig_s = int(signed['sig'][64:], 16)
                    sig = sigencode_der(sig_r, sig_s,
                                        generator_secp256k1.order())
                    txin['signatures'][ii] = sig.encode('hex') + '01'
                    tx._inputs[i] = txin

        except BaseException as e:
            self.give_error(e, True)
        else:
            print_error("Transaction is_complete", tx.is_complete())
            tx.raw = tx.serialize()
Ejemplo n.º 38
0
    def sign_transaction(self, tx, password):
        if tx.is_complete():
            return

        try:
            p2pkhTransaction = True
            derivations = self.get_tx_derivations(tx)
            inputhasharray = []
            hasharray = []
            pubkeyarray = []

            # Build hasharray from inputs
            for i, txin in enumerate(tx.inputs()):
                if txin['type'] == 'coinbase':
                    self.give_error(
                        "Coinbase not supported")  # should never happen

                if txin['type'] != 'p2pkh':
                    p2pkhTransaction = False

                for x_pubkey in txin['x_pubkeys']:
                    if x_pubkey in derivations:
                        index = derivations.get(x_pubkey)
                        inputPath = "%s/%d/%d" % (self.get_derivation(),
                                                  index[0], index[1])
                        inputHash = Hash(
                            binascii.unhexlify(tx.serialize_preimage(i)))
                        hasharray_i = {
                            'hash': to_hexstr(inputHash),
                            'keypath': inputPath
                        }
                        hasharray.append(hasharray_i)
                        inputhasharray.append(inputHash)
                        break
                else:
                    self.give_error("No matching x_key for sign_transaction"
                                    )  # should never happen

            # Build pubkeyarray from outputs
            for _type, address, amount in tx.outputs():
                assert _type == TYPE_ADDRESS
                info = tx.output_info.get(address)
                if info is not None:
                    index, xpubs, m = info
                    changePath = self.get_derivation() + "/%d/%d" % index
                    changePubkey = self.derive_pubkey(index[0], index[1])
                    pubkeyarray_i = {
                        'pubkey': changePubkey,
                        'keypath': changePath
                    }
                    pubkeyarray.append(pubkeyarray_i)

            # Special serialization of the unsigned transaction for
            # the mobile verification app.
            # At the moment, verification only works for p2pkh transactions.
            if p2pkhTransaction:

                class CustomTXSerialization(Transaction):
                    @classmethod
                    def input_script(self, txin, estimate_size=False):
                        if txin['type'] == 'p2pkh':
                            return Transaction.get_preimage_script(txin)
                        if txin['type'] == 'p2sh':
                            # Multisig verification has partial support, but is disabled. This is the
                            # expected serialization though, so we leave it here until we activate it.
                            return '00' + push_script(
                                Transaction.get_preimage_script(txin))
                        raise Exception("unsupported type %s" % txin['type'])

                tx_dbb_serialized = CustomTXSerialization(
                    tx.serialize()).serialize_to_network()
            else:
                # We only need this for the signing echo / verification.
                tx_dbb_serialized = None

            # Build sign command
            dbb_signatures = []
            steps = math.ceil(1.0 * len(hasharray) / self.maxInputs)
            for step in range(int(steps)):
                hashes = hasharray[step * self.maxInputs:(step + 1) *
                                   self.maxInputs]

                msg = {
                    "sign": {
                        "data": hashes,
                        "checkpub": pubkeyarray,
                    },
                }
                if tx_dbb_serialized is not None:
                    msg["sign"]["meta"] = to_hexstr(Hash(tx_dbb_serialized))
                msg = json.dumps(msg).encode('ascii')
                dbb_client = self.plugin.get_client(self)

                if not dbb_client.is_paired():
                    raise Exception("Could not sign transaction.")

                reply = dbb_client.hid_send_encrypt(msg)
                if 'error' in reply:
                    raise Exception(reply['error']['message'])

                if 'echo' not in reply:
                    raise Exception("Could not sign transaction.")

                if self.plugin.is_mobile_paired(
                ) and tx_dbb_serialized is not None:
                    reply['tx'] = tx_dbb_serialized
                    self.plugin.comserver_post_notification(reply)

                if steps > 1:
                    self.handler.show_message(
                        _("Signing large transaction. Please be patient ...") +
                        "\n\n" +
                        _("To continue, touch the Digital Bitbox's blinking light for 3 seconds."
                          ) + " " +
                        _("(Touch {} of {})").format((step + 1), steps) +
                        "\n\n" +
                        _("To cancel, briefly touch the blinking light or wait for the timeout."
                          ) + "\n\n")
                else:
                    self.handler.show_message(
                        _("Signing transaction...") + "\n\n" +
                        _("To continue, touch the Digital Bitbox's blinking light for 3 seconds."
                          ) + "\n\n" +
                        _("To cancel, briefly touch the blinking light or wait for the timeout."
                          ))

                # Send twice, first returns an echo for smart verification
                reply = dbb_client.hid_send_encrypt(msg)
                self.handler.finished()

                if 'error' in reply:
                    if reply["error"].get('code') in (600, 601):
                        # aborted via LED short touch or timeout
                        raise UserCancelled()
                    raise Exception(reply['error']['message'])

                if 'sign' not in reply:
                    raise Exception("Could not sign transaction.")

                dbb_signatures.extend(reply['sign'])

            # Fill signatures
            if len(dbb_signatures) != len(tx.inputs()):
                raise Exception("Incorrect number of transactions signed."
                                )  # Should never occur
            for i, txin in enumerate(tx.inputs()):
                num = txin['num_sig']
                for pubkey in txin['pubkeys']:
                    signatures = list(filter(None, txin['signatures']))
                    if len(signatures) == num:
                        break  # txin is complete
                    ii = txin['pubkeys'].index(pubkey)
                    signed = dbb_signatures[i]
                    if 'recid' in signed:
                        # firmware > v2.1.1
                        recid = int(signed['recid'], 16)
                        s = binascii.unhexlify(signed['sig'])
                        h = inputhasharray[i]
                        pk = ecc.ECPubkey.from_sig_string(s, recid, h)
                        pk = pk.get_public_key_hex(compressed=True)
                    elif 'pubkey' in signed:
                        # firmware <= v2.1.1
                        pk = signed['pubkey']
                    if pk != pubkey:
                        continue
                    sig_r = int(signed['sig'][:64], 16)
                    sig_s = int(signed['sig'][64:], 16)
                    sig = ecc.der_sig_from_r_and_s(sig_r, sig_s)
                    sig = to_hexstr(sig) + '01'
                    tx.add_signature_to_txin(i, ii, sig)
        except UserCancelled:
            raise
        except BaseException as e:
            self.give_error(e, True)
        else:
            print_error("Transaction is_complete", tx.is_complete())
            tx.raw = tx.serialize()
Ejemplo n.º 39
0
def give_error(message):
    print_error(message)
    raise Exception(message)
Ejemplo n.º 40
0
    def run(self, action, wallet_type):

        if action in ['create', 'restore']:
            if wallet_type == 'multisig':
                wallet_type = self.multisig_choice()
                if not wallet_type:
                    return
            elif wallet_type == 'hardware':
                hardware_wallets = map(lambda x:(x[1],x[2]), filter(lambda x:x[0]=='hardware', electrum_dash.wallet.wallet_types))
                wallet_type = self.choice(_("Hardware Wallet"), 'Select your hardware wallet', hardware_wallets)
                if not wallet_type:
                    return
            elif wallet_type == 'twofactor':
                wallet_type = '2fa'
            if action == 'create':
                self.storage.put('wallet_type', wallet_type, False)

        if action is None:
            return

        if action == 'restore':
            wallet = self.restore(wallet_type)
            if not wallet:
                return
            action = None
        else:
            wallet = Wallet(self.storage)
            action = wallet.get_action()
            # fixme: password is only needed for multiple accounts
            password = None

        # load wallet in plugins
        always_hook('installwizard_load_wallet', wallet, self)

        while action is not None:
            util.print_error("installwizard:", wallet, action)

            if action == 'create_seed':
                lang = self.config.get('language')
                seed = wallet.make_seed(lang)
                if not self.show_seed(seed, None):
                    return
                if not self.verify_seed(seed, None):
                    return
                password = self.password_dialog()
                wallet.add_seed(seed, password)
                wallet.create_master_keys(password)

            elif action == 'add_cosigners':
                n = int(re.match('(\d+)of(\d+)', wallet.wallet_type).group(2))
                xpub1 = wallet.master_public_keys.get("x1/")
                r = self.multi_mpk_dialog(xpub1, n - 1)
                if not r:
                    return
                for i, xpub in enumerate(r):
                    wallet.add_master_public_key("x%d/"%(i+2), xpub)

            elif action == 'create_accounts':
                wallet.create_main_account(password)
                self.waiting_dialog(wallet.synchronize)

            else:
                f = always_hook('get_wizard_action', self, wallet, action)
                if not f:
                    raise BaseException('unknown wizard action', action)
                r = f(wallet, self)
                if not r:
                    return

            # next action
            action = wallet.get_action()


        if self.network:
            if self.network.interfaces:
                self.network_dialog()
            else:
                QMessageBox.information(None, _('Warning'), _('You are offline'), _('OK'))
                self.network.stop()
                self.network = None

        # start wallet threads
        wallet.start_threads(self.network)

        if action == 'restore':
            self.waiting_dialog(lambda: wallet.restore(self.waiting_label.setText))
            if self.network:
                msg = _("Recovery successful") if wallet.is_found() else _("No transactions found for this seed")
            else:
                msg = _("This wallet was restored offline. It may contain more addresses than displayed.")
            QMessageBox.information(None, _('Information'), msg, _('OK'))

        return wallet
Ejemplo n.º 41
0
# ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.

import webbrowser
import datetime

from electrum_dash.address_synchronizer import TX_HEIGHT_LOCAL
from .util import *
from electrum_dash.i18n import _
from electrum_dash.util import block_explorer_URL, profiler, print_error, TxMinedStatus

try:
    from electrum_dash.plot import plot_history, NothingToPlotException
except:
    print_error("qt/history_list: could not import electrum_dash.plot. This feature needs matplotlib to be installed.")
    plot_history = None

# note: this list needs to be kept in sync with another in kivy
TX_ICONS = [
    "unconfirmed.png",
    "warning.png",
    "unconfirmed.png",
    "offline_tx.png",
    "clock1.png",
    "clock2.png",
    "clock3.png",
    "clock4.png",
    "clock5.png",
    "confirmed.png",
]
Ejemplo n.º 42
0
 def update_status(self, b):
     print_error('trezor status', b)
Ejemplo n.º 43
0
from PyQt4.QtGui import *
from PyQt4.QtCore import *

import traceback
import zlib
import json
from io import BytesIO
import sys
import platform

try:
    import amodem.audio
    import amodem.main
    import amodem.config
    print_error('Audio MODEM is available.')
    amodem.log.addHandler(amodem.logging.StreamHandler(sys.stderr))
    amodem.log.setLevel(amodem.logging.INFO)
except ImportError:
    amodem = None
    print_error('Audio MODEM is not found.')


class Plugin(BasePlugin):
    def __init__(self, config, name):
        BasePlugin.__init__(self, config, name)
        if self.is_available():
            self.modem_config = amodem.config.slowest()
            self.library_name = {'Linux': 'libportaudio.so'}[platform.system()]

    @hook
Ejemplo n.º 44
0
 def update_status(self, b):
     print_error('hw device status', b)