def verify_connection(self, expected_xfp, expected_xpub):
ex = (expected_xfp, expected_xpub)
if self._expected_device == ex:
# all is as expected
return
if ((self._expected_device is not None)
or (self.dev.master_fingerprint != expected_xfp)
or (self.dev.master_xpub != expected_xpub)):
# probably indicating programing error, not hacking
print_error(
"[coldcard]",
f"xpubs. reported by device: {self.dev.master_xpub}. "
f"stored in file: {expected_xpub}")
raise RuntimeError(
"Expecting 0x%08x but that's not whats connected?!" %
expected_xfp)
# check signature over session key
# - mitm might have lied about xfp and xpub up to here
# - important that we use value capture at wallet creation time, not some value
# we read over USB today
self.dev.check_mitm(expected_xpub=expected_xpub)
self._expected_device = ex
print_error("[coldcard]", "Successfully verified against MiTM")
def give_error(self, message, clear_client = False):
print_error(message)
if not self.signing:
self.handler.show_error(message)
else:
self.signing = False
if clear_client:
self.client = None
raise UserFacingException(message)
def comserver_post_notification(self, payload):
assert self.is_mobile_paired(), "unexpected mobile pairing error"
url = 'https://digitalbitbox.com/smartverification/index.php'
key_s = base64.b64decode(self.digitalbitbox_config[ENCRYPTION_PRIVKEY_KEY])
args = 'c=data&s=0&dt=0&uuid=%s&pl=%s' % (
self.digitalbitbox_config[CHANNEL_ID_KEY],
EncodeAES_base64(key_s, json.dumps(payload).encode('ascii')).decode('ascii'),
)
try:
text = Network.send_http_on_proxy('post', url, body=args.encode('ascii'), headers={'content-type': 'application/x-www-form-urlencoded'})
print_error('digitalbitbox reply from server', text)
except Exception as e:
self.handler.show_error(repr(e)) # repr because str(Exception()) == ''
def get_xpub(self, bip32_path, xtype):
assert xtype in ColdcardPlugin.SUPPORTED_XTYPES
print_error('[coldcard]', 'Derive xtype = %r' % xtype)
xpub = self.dev.send_recv(CCProtocolPacker.get_xpub(bip32_path),
timeout=5000)
# TODO handle timeout?
# change type of xpub to the requested type
try:
node = BIP32Node.from_xkey(xpub)
except InvalidMasterKeyVersionBytes:
raise UserFacingException(
_('Invalid xpub magic. Make sure your {} device is set to the correct chain.'
).format(self.device)) from None
if xtype != 'standard':
xpub = node._replace(xtype=xtype).to_xpub()
return xpub
def sign_transaction(self, tx, password):
# Build a PSBT in memory, upload it for signing.
# - we can also work offline (without paired device present)
if tx.is_complete():
return
client = self.get_client()
assert client.dev.master_fingerprint == self.ckcc_xfp
raw_psbt = self.build_psbt(tx)
#open('debug.psbt', 'wb').write(out_fd.getvalue())
try:
try:
self.handler.show_message("Authorize Transaction...")
client.sign_transaction_start(raw_psbt, True)
while 1:
# How to kill some time, without locking UI?
time.sleep(0.250)
resp = client.sign_transaction_poll()
if resp is not None:
break
rlen, rsha = resp
# download the resulting txn.
new_raw = client.download_file(rlen, rsha)
finally:
self.handler.finished()
except (CCUserRefused, CCBusyError) as exc:
print_error('[coldcard]', 'Did not sign:', str(exc))
self.handler.show_error(str(exc))
return
except BaseException as e:
traceback.print_exc(file=sys.stderr)
self.give_error(e, True)
return
# trust the coldcard to re-searilize final product right?
tx.update(bh2u(new_raw))
def use_tor_proxy(self, use_it):
if not use_it:
self.proxy_cb.setChecked(False)
else:
socks5_mode_index = self.proxy_mode.findText('SOCKS5')
if socks5_mode_index == -1:
print_error("[network_dialog] can't find proxy_mode 'SOCKS5'")
return
self.proxy_mode.setCurrentIndex(socks5_mode_index)
self.proxy_host.setText("127.0.0.1")
self.proxy_port.setText(str(self.tor_proxy[1]))
self.proxy_user.setText("")
self.proxy_password.setText("")
self.tor_cb.setChecked(True)
self.proxy_cb.setChecked(True)
self.check_disable_proxy(use_it)
self.set_proxy()
def hid_send_plain(self, msg):
reply = ""
try:
serial_number = self.dbb_hid.get_serial_number_string()
if "v2.0." in serial_number or "v1." in serial_number:
hidBufSize = 4096
self.dbb_hid.write('\0' + msg + '\0' * (hidBufSize - len(msg)))
r = bytearray()
while len(r) < hidBufSize:
r += bytearray(self.dbb_hid.read(hidBufSize))
else:
self.hid_send_frame(msg)
r = self.hid_read_frame()
r = r.rstrip(b' \t\r\n\0')
r = r.replace(b"\0", b'')
r = to_string(r, 'utf8')
reply = json.loads(r)
except Exception as e:
print_error('Exception caught ' + repr(e))
return reply
def hid_send_encrypt(self, msg):
sha256_byte_len = 32
reply = ""
try:
encryption_key, authentication_key = derive_keys(self.password)
msg = EncodeAES_bytes(encryption_key, msg)
hmac_digest = hmac_oneshot(authentication_key, msg, hashlib.sha256)
authenticated_msg = base64.b64encode(msg + hmac_digest)
reply = self.hid_send_plain(authenticated_msg)
if 'ciphertext' in reply:
b64_unencoded = bytes(base64.b64decode(''.join(reply["ciphertext"])))
reply_hmac = b64_unencoded[-sha256_byte_len:]
hmac_calculated = hmac_oneshot(authentication_key, b64_unencoded[:-sha256_byte_len], hashlib.sha256)
if not hmac.compare_digest(reply_hmac, hmac_calculated):
raise Exception("Failed to validate HMAC")
reply = DecodeAES_bytes(encryption_key, b64_unencoded[:-sha256_byte_len])
reply = to_string(reply, 'utf8')
reply = json.loads(reply)
if 'error' in reply:
self.password = None
except Exception as e:
print_error('Exception caught ' + repr(e))
return reply
def sign_transaction(self, tx, password):
if tx.is_complete():
return
try:
p2pkhTransaction = True
derivations = self.get_tx_derivations(tx)
inputhasharray = []
hasharray = []
pubkeyarray = []
# Build hasharray from inputs
for i, txin in enumerate(tx.inputs()):
if txin['type'] == 'coinbase':
self.give_error("Coinbase not supported") # should never happen
if txin['type'] != 'p2pkh':
p2pkhTransaction = False
for x_pubkey in txin['x_pubkeys']:
if x_pubkey in derivations:
index = derivations.get(x_pubkey)
inputPath = "%s/%d/%d" % (self.get_derivation(), index[0], index[1])
inputHash = sha256d(binascii.unhexlify(tx.serialize_preimage(i)))
hasharray_i = {'hash': to_hexstr(inputHash), 'keypath': inputPath}
hasharray.append(hasharray_i)
inputhasharray.append(inputHash)
break
else:
self.give_error("No matching x_key for sign_transaction") # should never happen
# Build pubkeyarray from outputs
for o in tx.outputs():
assert o.type == TYPE_ADDRESS
info = tx.output_info.get(o.address)
if info is not None:
index = info.address_index
changePath = self.get_derivation() + "/%d/%d" % index
changePubkey = self.derive_pubkey(index[0], index[1])
pubkeyarray_i = {'pubkey': changePubkey, 'keypath': changePath}
pubkeyarray.append(pubkeyarray_i)
# Special serialization of the unsigned transaction for
# the mobile verification app.
# At the moment, verification only works for p2pkh transactions.
if p2pkhTransaction:
class CustomTXSerialization(Transaction):
@classmethod
def input_script(self, txin, estimate_size=False):
if txin['type'] == 'p2pkh':
return Transaction.get_preimage_script(txin)
if txin['type'] == 'p2sh':
# Multisig verification has partial support, but is disabled. This is the
# expected serialization though, so we leave it here until we activate it.
return '00' + push_script(Transaction.get_preimage_script(txin))
raise Exception("unsupported type %s" % txin['type'])
tx_dbb_serialized = CustomTXSerialization(tx.serialize()).serialize_to_network()
else:
# We only need this for the signing echo / verification.
tx_dbb_serialized = None
# Build sign command
dbb_signatures = []
steps = math.ceil(1.0 * len(hasharray) / self.maxInputs)
for step in range(int(steps)):
hashes = hasharray[step * self.maxInputs : (step + 1) * self.maxInputs]
msg = {
"sign": {
"data": hashes,
"checkpub": pubkeyarray,
},
}
if tx_dbb_serialized is not None:
msg["sign"]["meta"] = to_hexstr(sha256d(tx_dbb_serialized))
msg = json.dumps(msg).encode('ascii')
dbb_client = self.plugin.get_client(self)
if not dbb_client.is_paired():
raise Exception("Could not sign transaction.")
reply = dbb_client.hid_send_encrypt(msg)
if 'error' in reply:
raise Exception(reply['error']['message'])
if 'echo' not in reply:
raise Exception("Could not sign transaction.")
if self.plugin.is_mobile_paired() and tx_dbb_serialized is not None:
reply['tx'] = tx_dbb_serialized
self.plugin.comserver_post_notification(reply)
if steps > 1:
self.handler.show_message(_("Signing large transaction. Please be patient ...") + "\n\n" +
_("To continue, touch the Digital Bitbox's blinking light for 3 seconds.") + " " +
_("(Touch {} of {})").format((step + 1), steps) + "\n\n" +
_("To cancel, briefly touch the blinking light or wait for the timeout.") + "\n\n")
else:
self.handler.show_message(_("Signing transaction...") + "\n\n" +
_("To continue, touch the Digital Bitbox's blinking light for 3 seconds.") + "\n\n" +
_("To cancel, briefly touch the blinking light or wait for the timeout."))
# Send twice, first returns an echo for smart verification
reply = dbb_client.hid_send_encrypt(msg)
self.handler.finished()
if 'error' in reply:
if reply["error"].get('code') in (600, 601):
# aborted via LED short touch or timeout
raise UserCancelled()
raise Exception(reply['error']['message'])
if 'sign' not in reply:
raise Exception("Could not sign transaction.")
dbb_signatures.extend(reply['sign'])
# Fill signatures
if len(dbb_signatures) != len(tx.inputs()):
raise Exception("Incorrect number of transactions signed.") # Should never occur
for i, txin in enumerate(tx.inputs()):
num = txin['num_sig']
for pubkey in txin['pubkeys']:
signatures = list(filter(None, txin['signatures']))
if len(signatures) == num:
break # txin is complete
ii = txin['pubkeys'].index(pubkey)
signed = dbb_signatures[i]
if 'recid' in signed:
# firmware > v2.1.1
recid = int(signed['recid'], 16)
s = binascii.unhexlify(signed['sig'])
h = inputhasharray[i]
pk = ecc.ECPubkey.from_sig_string(s, recid, h)
pk = pk.get_public_key_hex(compressed=True)
elif 'pubkey' in signed:
# firmware <= v2.1.1
pk = signed['pubkey']
if pk != pubkey:
continue
sig_r = int(signed['sig'][:64], 16)
sig_s = int(signed['sig'][64:], 16)
sig = ecc.der_sig_from_r_and_s(sig_r, sig_s)
sig = to_hexstr(sig) + '01'
tx.add_signature_to_txin(i, ii, sig)
except UserCancelled:
raise
except BaseException as e:
self.give_error(e, True)
else:
print_error("Transaction is_complete", tx.is_complete())
tx.raw = tx.serialize()
def update_status(self, b):
print_error('hw device status', b)
def show_error(self, msg, blocking=False):
print_error(msg)
from io import BytesIO
import sys
import platform
from PyQt5.QtWidgets import (QComboBox, QGridLayout, QLabel, QPushButton)
from electrum_sct.plugin import BasePlugin, hook
from electrum_sct.gui.qt.util import WaitingDialog, EnterButton, WindowModalDialog, read_QIcon
from electrum_sct.util import print_msg, print_error
from electrum_sct.i18n import _
try:
import amodem.audio
import amodem.main
import amodem.config
print_error('Audio MODEM is available.')
amodem.log.addHandler(amodem.logging.StreamHandler(sys.stderr))
amodem.log.setLevel(amodem.logging.INFO)
except ImportError:
amodem = None
print_error('Audio MODEM is not found.')
class Plugin(BasePlugin):
def __init__(self, parent, config, name):
BasePlugin.__init__(self, parent, config, name)
if self.is_available():
self.modem_config = amodem.config.slowest()
self.library_name = {'Linux': 'libportaudio.so'}[platform.system()]
def is_available(self):
from electrum_sct.util import (block_explorer_URL, profiler, print_error,
TxMinedInfo, OrderedDictWithIndex, PrintError,
timestamp_to_datetime)
from .util import (read_QIcon, MONOSPACE_FONT, Buttons, CancelButton, OkButton,
filename_field, MyTreeView, AcceptFileDragDrop,
WindowModalDialog, CloseButton)
if TYPE_CHECKING:
from electrum_sct.wallet import Abstract_Wallet
try:
from electrum_sct.plot import plot_history, NothingToPlotException
except:
print_error(
"qt/history_list: could not import electrum_sct.plot. This feature needs matplotlib to be installed."
)
plot_history = None
# note: this list needs to be kept in sync with another in kivy
TX_ICONS = [
"unconfirmed.png",
"warning.png",
"unconfirmed.png",
"offline_tx.png",
"clock1.png",
"clock2.png",
"clock3.png",
"clock4.png",
"clock5.png",
"confirmed.png",
