Ejemplo n.º 1
0
    def __init__(self, parent):
        super(MatrixDialog, self).__init__(parent)
        self.setWindowTitle(_("Trezor Matrix Recovery"))
        self.num = 9
        self.loop = QEventLoop()

        vbox = QVBoxLayout(self)
        vbox.addWidget(WWLabel(MATRIX_RECOVERY))

        grid = QGridLayout()
        grid.setSpacing(0)
        self.char_buttons = []
        for y in range(3):
            for x in range(3):
                button = QPushButton('?')
                button.clicked.connect(
                    partial(self.process_key,
                            ord('1') + y * 3 + x))
                grid.addWidget(button, 3 - y, x)
                self.char_buttons.append(button)
        vbox.addLayout(grid)

        self.backspace_button = QPushButton("<=")
        self.backspace_button.clicked.connect(
            partial(self.process_key, Qt.Key_Backspace))
        self.cancel_button = QPushButton(_("Cancel"))
        self.cancel_button.clicked.connect(
            partial(self.process_key, Qt.Key_Escape))
        buttons = Buttons(self.backspace_button, self.cancel_button)
        vbox.addSpacing(40)
        vbox.addLayout(buttons)
        self.refresh()
        self.show()
Ejemplo n.º 2
0
 def load_wallet(self, wallet, window):
     for keystore in wallet.get_keystores():
         if not isinstance(keystore, self.keystore_class):
             continue
         if not self.libraries_available:
             if hasattr(self, 'libraries_available_message'):
                 message = self.libraries_available_message + '\n'
             else:
                 message = _("Cannot find python library for"
                             ) + " '%s'.\n" % self.name
             message += _("Make sure you install it with python3")
             window.show_error(message)
             return
         tooltip = self.device + '\n' + (keystore.label or 'unnamed')
         cb = partial(self.show_settings_dialog, window, keystore)
         button = StatusBarButton(QIcon(self.icon_unpaired), tooltip, cb)
         button.icon_paired = self.icon_paired
         button.icon_unpaired = self.icon_unpaired
         window.statusBar().addPermanentWidget(button)
         handler = self.create_handler(window)
         handler.button = button
         keystore.handler = handler
         keystore.thread = TaskThread(window, window.on_error)
         self.add_show_address_on_hw_device_button_for_receive_addr(
             wallet, keystore, window)
         # Trigger a pairing
         keystore.thread.add(partial(self.get_client, keystore))
Ejemplo n.º 3
0
 def seed_options(self):
     dialog = QDialog()
     vbox = QVBoxLayout(dialog)
     if 'ext' in self.options:
         cb_ext = QCheckBox(_('Extend this seed with custom words'))
         cb_ext.setChecked(self.is_ext)
         vbox.addWidget(cb_ext)
     if 'bip39' in self.options:
         def f(b):
             self.is_seed = (lambda x: bool(x)) if b else self.saved_is_seed
             self.is_bip39 = b
             self.on_edit()
             if b:
                 msg = ' '.join([
                     '<b>' + _('Warning') + ':</b>  ',
                     _('BIP39 seeds can be imported in Electrum, so that users can access funds locked in other wallets.'),
                     _('However, we do not generate BIP39 seeds, because they do not meet our safety standard.'),
                     _('BIP39 seeds do not include a version number, which compromises compatibility with future software.'),
                     _('We do not guarantee that BIP39 imports will always be supported in Electrum.'),
                 ])
             else:
                 msg = ''
             self.seed_warning.setText(msg)
         cb_bip39 = QCheckBox(_('BIP39 seed (e.g. Android)'))
         cb_bip39.toggled.connect(f)
         cb_bip39.setChecked(self.is_bip39)
         vbox.addWidget(cb_bip39)
     vbox.addLayout(Buttons(OkButton(dialog)))
     if not dialog.exec_():
         return None
     self.is_ext = cb_ext.isChecked() if 'ext' in self.options else False
     self.is_bip39 = cb_bip39.isChecked() if 'bip39' in self.options else False
Ejemplo n.º 4
0
 def show_address(self, wallet, address, keystore=None):
     if keystore is None:
         keystore = wallet.get_keystore()
     if not self.show_address_helper(wallet, address, keystore):
         return
     if type(wallet) is not Standard_Wallet:
         keystore.handler.show_error(
             _('This function is only available for standard wallets when using {}.'
               ).format(self.device))
         return
     client = self.get_client(wallet.keystore)
     if not client.atleast_version(1, 3):
         wallet.keystore.handler.show_error(
             _("Your device firmware is too old"))
         return
     change, index = wallet.get_address_index(address)
     derivation = wallet.keystore.derivation
     address_path = "%s/%d/%d" % (derivation, change, index)
     address_n = client.expand_path(address_path)
     segwit = wallet.keystore.is_segwit()
     script_type = self.types.SPENDP2SHWITNESS if segwit else self.types.SPENDADDRESS
     client.get_address(self.get_coin_name(),
                        address_n,
                        True,
                        script_type=script_type)
Ejemplo n.º 5
0
 def create_menu(self, position):
     item = self.itemAt(position)
     if not item:
         return
     addr = str(item.text(1))
     req = self.wallet.receive_requests.get(addr)
     if req is None:
         self.update()
         return
     column = self.currentColumn()
     column_title = self.headerItem().text(column)
     column_data = item.text(column)
     menu = QMenu(self)
     menu.addAction(
         _("Copy {}").format(column_title),
         lambda: self.parent.app.clipboard().setText(column_data))
     menu.addAction(
         _("Copy URI"), lambda: self.parent.view_and_paste(
             'URI', '', self.parent.get_request_URI(addr)))
     menu.addAction(_("Save as BIP70 file"),
                    lambda: self.parent.export_payment_request(addr))
     menu.addAction(_("Delete"),
                    lambda: self.parent.delete_payment_request(addr))
     run_hook('receive_list_menu', menu, addr)
     menu.exec_(self.viewport().mapToGlobal(position))
Ejemplo n.º 6
0
    def make_cypherseed(self, img, rawnoise, calibration=False, is_seed=True):
        img = img.convertToFormat(QImage.Format_Mono)
        p = QPainter()
        p.begin(img)
        p.setCompositionMode(26)  #xor
        p.drawImage(0, 0, rawnoise)
        p.end()
        cypherseed = self.pixelcode_2x2(img)
        cypherseed = QBitmap.fromImage(cypherseed)
        cypherseed = cypherseed.scaled(self.f_size, Qt.KeepAspectRatio)
        cypherseed = self.overlay_marks(cypherseed, True, calibration)

        if not is_seed:
            self.filename = _('custom_secret') + '_'
            self.was = _('Custom secret')
        else:
            self.filename = self.wallet_name + '_' + _('seed') + '_'
            self.was = self.wallet_name + ' ' + _('seed')

        if not calibration:
            self.toPdf(QImage(cypherseed))
            QDesktopServices.openUrl(
                QUrl.fromLocalFile(
                    os.path.abspath(self.base_dir + self.filename +
                                    self.version + '_' + self.code_id +
                                    '.pdf')))
            cypherseed.save(self.base_dir + self.filename + self.version +
                            '_' + self.code_id + '.png')
            self.bcrypt(self.c_dialog)
        return cypherseed
Ejemplo n.º 7
0
 def dbb_load_backup(self, show_msg=True):
     backups = self.hid_send_encrypt(b'{"backup":"list"}')
     if 'error' in backups:
         raise Exception(backups['error']['message'])
     try:
         f = self.handler.win.query_choice(_("Choose a backup file:"),
                                           backups['backup'])
     except Exception:
         return False  # Back button pushed
     key = self.backup_password_dialog()
     if key is None:
         raise Exception('Canceled by user')
     key = self.stretch_key(key)
     if show_msg:
         self.handler.show_message(
             _("Loading backup...") + "\n\n" +
             _("To continue, touch the Digital Bitbox's light for 3 seconds."
               ) + "\n\n" +
             _("To cancel, briefly touch the light or wait for the timeout."
               ))
     msg = ('{"seed":{"source": "backup", "key": "%s", "filename": "%s"}}' %
            (key, backups['backup'][f])).encode('utf8')
     hid_reply = self.hid_send_encrypt(msg)
     self.handler.finished()
     if 'error' in hid_reply:
         raise Exception(hid_reply['error']['message'])
     return True
Ejemplo n.º 8
0
 def task():
     wallet.wait_until_synchronized()
     if wallet.is_found():
         msg = _("Recovery successful")
     else:
         msg = _("No transactions found for this seed")
     self.synchronized_signal.emit(msg)
Ejemplo n.º 9
0
    def __init__(self, parent):
        super(CharacterDialog, self).__init__(parent)
        self.setWindowTitle(_("KeepKey Seed Recovery"))
        self.character_pos = 0
        self.word_pos = 0
        self.loop = QEventLoop()
        self.word_help = QLabel()
        self.char_buttons = []

        vbox = QVBoxLayout(self)
        vbox.addWidget(WWLabel(CHARACTER_RECOVERY))
        hbox = QHBoxLayout()
        hbox.addWidget(self.word_help)
        for i in range(4):
            char_button = CharacterButton('*')
            char_button.setMaximumWidth(36)
            self.char_buttons.append(char_button)
            hbox.addWidget(char_button)
        self.accept_button = CharacterButton(_("Accept Word"))
        self.accept_button.clicked.connect(partial(self.process_key, 32))
        self.rejected.connect(partial(self.loop.exit, 1))
        hbox.addWidget(self.accept_button)
        hbox.addStretch(1)
        vbox.addLayout(hbox)

        self.finished_button = QPushButton(_("Seed Entered"))
        self.cancel_button = QPushButton(_("Cancel"))
        self.finished_button.clicked.connect(
            partial(self.process_key, Qt.Key_Return))
        self.cancel_button.clicked.connect(self.rejected)
        buttons = Buttons(self.finished_button, self.cancel_button)
        vbox.addSpacing(40)
        vbox.addLayout(buttons)
        self.refresh()
        self.show()
Ejemplo n.º 10
0
 def show_address(self, wallet, address, keystore=None):
     if keystore is None:
         keystore = wallet.get_keystore()
     if not self.show_address_helper(wallet, address, keystore):
         return
     if type(wallet) is not Standard_Wallet:
         keystore.handler.show_error(
             _('This function is only available for standard wallets when using {}.'
               ).format(self.device))
         return
     if not self.is_mobile_paired():
         keystore.handler.show_error(
             _('This function is only available after pairing your {} with a mobile device.'
               ).format(self.device))
         return
     if not keystore.is_p2pkh():
         keystore.handler.show_error(
             _('This function is only available for p2pkh keystores when using {}.'
               ).format(self.device))
         return
     change, index = wallet.get_address_index(address)
     keypath = '%s/%d/%d' % (keystore.derivation, change, index)
     xpub = self.get_client(keystore)._get_xpub(keypath)
     verify_request_payload = {
         "type": 'p2pkh',
         "echo": xpub['echo'],
     }
     self.comserver_post_notification(verify_request_payload)
Ejemplo n.º 11
0
 def get_tooltip(self, pos, fee_rate):
     mempool = self.config.use_mempool_fees()
     target, estimate = self.config.get_fee_text(pos, self.dyn, mempool, fee_rate)
     if self.dyn:
         return _('Target') + ': ' + target + '\n' + _('Current rate') + ': ' + estimate
     else:
         return _('Fixed rate') + ': ' + target + '\n' + _('Estimate') + ': ' + estimate
Ejemplo n.º 12
0
 def show_address(self, sequence, txin_type):
     client = self.get_client()
     address_path = self.get_derivation()[2:] + "/%d/%d" % sequence
     self.handler.show_message(_("Showing address ..."))
     segwit = Transaction.is_segwit_inputtype(txin_type)
     segwitNative = txin_type == 'p2wpkh'
     try:
         client.getWalletPublicKey(address_path,
                                   showOnScreen=True,
                                   segwit=segwit,
                                   segwitNative=segwitNative)
     except BTChipException as e:
         if e.sw == 0x6985:  # cancelled by user
             pass
         elif e.sw == 0x6982:
             raise  # pin lock. decorator will catch it
         elif e.sw == 0x6b00:  # hw.1 raises this
             self.handler.show_error('{}\n{}\n{}'.format(
                 _('Error showing address') + ':', e,
                 _('Your device might not have support for this functionality.'
                   )))
         else:
             traceback.print_exc(file=sys.stderr)
             self.handler.show_error(e)
     except BaseException as e:
         traceback.print_exc(file=sys.stderr)
         self.handler.show_error(e)
     finally:
         self.handler.finished()
Ejemplo n.º 13
0
 def toggle_passphrase(self):
     if self.features.passphrase_protection:
         self.msg = _("Confirm on your {} device to disable passphrases")
     else:
         self.msg = _("Confirm on your {} device to enable passphrases")
     enabled = not self.features.passphrase_protection
     self.apply_settings(use_passphrase=enabled)
Ejemplo n.º 14
0
 def add_cosigner_dialog(self, run_next, index, is_valid):
     title = _("Add Cosigner") + " %d" % index
     message = ' '.join([
         _('Please enter the master public key (xpub) of your cosigner.'),
         _('Enter their master private key (xprv) if you want to be able to sign for them.'
           )
     ])
     return self.text_input(title, message, is_valid)
Ejemplo n.º 15
0
 def __init__(self, text="", allow_multi=False):
     ButtonsTextEdit.__init__(self, text)
     self.allow_multi = allow_multi
     self.setReadOnly(0)
     self.addButton(":icons/file.png", self.file_input, _("Read file"))
     icon = ":icons/qrcode_white.png" if ColorScheme.dark_scheme else ":icons/qrcode.png"
     self.addButton(icon, self.qr_input, _("Read QR code"))
     run_hook('scan_text_edit', self)
Ejemplo n.º 16
0
 def set_pin(self, remove):
     if remove:
         self.msg = _("Confirm on your {} device to disable PIN protection")
     elif self.features.pin_protection:
         self.msg = _("Confirm on your {} device to change your PIN")
     else:
         self.msg = _("Confirm on your {} device to set a PIN")
     self.change_pin(remove)
Ejemplo n.º 17
0
    def __init__(self, seed=None, title=None, icon=True, msg=None, options=None,
                 is_seed=None, passphrase=None, parent=None, for_seed_words=True):
        QVBoxLayout.__init__(self)
        self.parent = parent
        self.options = options
        if title:
            self.addWidget(WWLabel(title))
        if seed:  # "read only", we already have the text
            if for_seed_words:
                self.seed_e = ButtonsTextEdit()
            else:  # e.g. xpub
                self.seed_e = ShowQRTextEdit()
            self.seed_e.setReadOnly(True)
            self.seed_e.setText(seed)
        else:  # we expect user to enter text
            assert for_seed_words
            self.seed_e = CompletionTextEdit()
            self.seed_e.setTabChangesFocus(False)  # so that tab auto-completes
            self.is_seed = is_seed
            self.saved_is_seed = self.is_seed
            self.seed_e.textChanged.connect(self.on_edit)
            self.initialize_completer()

        self.seed_e.setMaximumHeight(75)
        hbox = QHBoxLayout()
        if icon:
            logo = QLabel()
            logo.setPixmap(QPixmap(":icons/seed.png").scaledToWidth(64, mode=Qt.SmoothTransformation))
            logo.setMaximumWidth(60)
            hbox.addWidget(logo)
        hbox.addWidget(self.seed_e)
        self.addLayout(hbox)
        hbox = QHBoxLayout()
        hbox.addStretch(1)
        self.seed_type_label = QLabel('')
        hbox.addWidget(self.seed_type_label)

        # options
        self.is_bip39 = False
        self.is_ext = False
        if options:
            opt_button = EnterButton(_('Options'), self.seed_options)
            hbox.addWidget(opt_button)
            self.addLayout(hbox)
        if passphrase:
            hbox = QHBoxLayout()
            passphrase_e = QLineEdit()
            passphrase_e.setText(passphrase)
            passphrase_e.setReadOnly(True)
            hbox.addWidget(QLabel(_("Your seed extension is") + ':'))
            hbox.addWidget(passphrase_e)
            self.addLayout(hbox)
        self.addStretch(1)
        self.seed_warning = WWLabel('')
        if msg:
            self.seed_warning.setText(seed_warning_msg(seed))
        self.addWidget(self.seed_warning)
Ejemplo n.º 18
0
 def __init__(self, parent, seed, passphrase):
     WindowModalDialog.__init__(self, parent, ('Electrum-XSH - ' + _('Seed')))
     self.setMinimumWidth(400)
     vbox = QVBoxLayout(self)
     title =  _("Your wallet generation seed is:")
     slayout = SeedLayout(title=title, seed=seed, msg=True, passphrase=passphrase)
     vbox.addLayout(slayout)
     run_hook('set_seed', seed, slayout.seed_e)
     vbox.addLayout(Buttons(CloseButton(self)))
Ejemplo n.º 19
0
 def __init__(self, parent=None):
     MyTreeWidget.__init__(self, parent, self.create_menu, [
         _('Address'),
         _('Label'),
         _('Amount'),
         _('Height'),
         _('Output point')
     ], 1)
     self.setSelectionMode(QAbstractItemView.ExtendedSelection)
     self.setSortingEnabled(True)
Ejemplo n.º 20
0
 def wipe_device():
     wallet = window.wallet
     if wallet and sum(wallet.get_balance()):
         title = _("Confirm Device Wipe")
         msg = _("Are you SURE you want to wipe the device?\n"
                 "Your wallet still has SHIELD in it!")
         if not self.question(
                 msg, title=title, icon=QMessageBox.Critical):
             return
     invoke_client('wipe_device', unpair_after=True)
Ejemplo n.º 21
0
 def show_xpub_dialog(self, xpub, run_next):
     msg = ' '.join([
         _("Here is your master public key."),
         _("Please share it with your cosigners.")
     ])
     vbox = QVBoxLayout()
     layout = SeedLayout(xpub, title=msg, icon=False, for_seed_words=False)
     vbox.addLayout(layout.layout())
     self.exec_layout(vbox, _('Master Public Key'))
     return None
Ejemplo n.º 22
0
 def create_password_layout(self, wallet, is_encrypted, OK_button):
     if not is_encrypted:
         msg = _('Your wallet file is NOT encrypted.')
     else:
         msg = _('Your wallet file is encrypted.')
     msg += '\n' + _(
         'Note: If you enable this setting, you will need your hardware device to open your wallet.'
     )
     msg += '\n' + _('Use this dialog to toggle encryption.')
     self.playout = PasswordLayoutForHW(wallet, msg, PW_CHANGE, OK_button)
Ejemplo n.º 23
0
 def export(self):
     name = 'signed_%s.txn' % (
         self.tx.txid()[0:8]) if self.tx.is_complete() else 'unsigned.txn'
     fileName = self.main_window.getSaveFileName(
         _("Select where to save your signed transaction"), name, "*.txn")
     if fileName:
         with open(fileName, "w+") as f:
             f.write(json.dumps(self.tx.as_dict(), indent=4) + '\n')
         self.show_message(_("Transaction exported successfully"))
         self.saved = True
Ejemplo n.º 24
0
 def __init__(self, parent):
     MyTreeWidget.__init__(self, parent, self.create_menu, [
         _('Expires'),
         _('Requestor'),
         _('Description'),
         _('Amount'),
         _('Status')
     ], 2)
     self.setSortingEnabled(True)
     self.header().setSectionResizeMode(1, QHeaderView.Interactive)
     self.setColumnWidth(1, 200)
Ejemplo n.º 25
0
 def send_report(self):
     try:
         response = BaseCrashReporter.send_report(self)
     except BaseException as e:
         traceback.print_exc(file=sys.stderr)
         self.main_window.show_critical(
             _('There was a problem with the automatic reporting:') + '\n' +
             str(e) + '\n' + _("Please report this issue manually."))
         return
     QMessageBox.about(self, _("Crash report"), response.text)
     self.close()
Ejemplo n.º 26
0
 def restore_seed_dialog(self, run_next, test):
     options = []
     if self.opt_ext:
         options.append('ext')
     if self.opt_bip39:
         options.append('bip39')
     title = _('Enter Seed')
     message = _(
         'Please enter your seed phrase in order to restore your wallet.\nAndroid wallet users should enable "Options > BIP39 seed" below.'
     )
     return self.seed_input(title, message, test, options)
Ejemplo n.º 27
0
 def confirm_seed_dialog(self, run_next, test):
     self.app.clipboard().clear()
     title = _('Confirm Seed')
     message = ' '.join([
         _('Your seed is important!'),
         _('If you lose your seed, your money will be permanently lost.'),
         _('To make sure that you have properly saved your seed, please retype it here.'
           )
     ])
     seed, is_bip39, is_ext = self.seed_input(title, message, test, None)
     return seed
Ejemplo n.º 28
0
 def closeEvent(self, event):
     if (self.prompt_if_unsaved and not self.saved and not self.question(
             _('This transaction is not saved. Close anyway?'),
             title=_("Warning"))):
         event.ignore()
     else:
         event.accept()
         try:
             dialogs.remove(self)
         except ValueError:
             pass  # was not in list already
Ejemplo n.º 29
0
 def send_report(self):
     try:
         response = BaseCrashReporter.send_report(self,
                                                  "/crash.json").json()
     except requests.exceptions.RequestException:
         self.show_popup(_('Unable to send report'),
                         _("Please check your network connection."))
     else:
         self.show_popup(_('Report sent'), response["text"])
         if response["location"]:
             self.open_url(response["location"])
     self.dismiss()
Ejemplo n.º 30
0
 def setup_device(self, device_info, wizard, purpose):
     devmgr = self.device_manager()
     device_id = device_info.device.id_
     client = devmgr.client_by_id(device_id)
     if client is None:
         raise Exception(
             _('Failed to create a client for this device.') + '\n' +
             _('Make sure it is in the correct state.'))
     client.handler = self.create_handler(wizard)
     if purpose == HWD_SETUP_NEW_WALLET:
         client.setupRunning = True
     client.get_xpub("m/44'/2'", 'standard')