Ejemplo n.º 1
0
	def setupConfigEntries(self,device):
		cmd = "config.inputDevices." + device + " = ConfigSubsection()"
		exec (cmd)
		if getBoxType() == 'dm800' or getBoxType() == 'odinm9' or getBoxType() == 'odinm7' or getBoxType() == 'odinm6' or getBoxType() == 'azboxhd':
			cmd = "config.inputDevices." + device + ".enabled = ConfigYesNo(default = False)"
		else:
			cmd = "config.inputDevices." + device + ".enabled = ConfigYesNo(default = False)"		
		exec (cmd)
		cmd = "config.inputDevices." + device + ".enabled.addNotifier(self.inputDevicesEnabledChanged,config.inputDevices." + device + ".enabled)"
		exec (cmd)
		cmd = "config.inputDevices." + device + '.name = ConfigText(default="")'
		exec (cmd)
		cmd = "config.inputDevices." + device + ".name.addNotifier(self.inputDevicesNameChanged,config.inputDevices." + device + ".name)"
		exec (cmd)
		if getBoxType() == 'odinm9' or getBoxType() == 'odinm7' or getBoxType() == 'odinm6':
			cmd = "config.inputDevices." + device + ".repeat = ConfigSlider(default=400, increment = 10, limits=(0, 500))"
		elif getBoxType() == 'azboxhd':
			cmd = "config.inputDevices." + device + ".repeat = ConfigSlider(default=150, increment = 10, limits=(0, 500))"
		else:		
			cmd = "config.inputDevices." + device + ".repeat = ConfigSlider(default=100, increment = 10, limits=(0, 500))"	
		exec (cmd)
		cmd = "config.inputDevices." + device + ".repeat.addNotifier(self.inputDevicesRepeatChanged,config.inputDevices." + device + ".repeat)"
		exec (cmd)
		if getBoxType() == 'odinm9' or getBoxType() == 'odinm7' or getBoxType() == 'odinm6':
			cmd = "config.inputDevices." + device + ".delay = ConfigSlider(default=200, increment = 100, limits=(0, 5000))"
		else:
			cmd = "config.inputDevices." + device + ".delay = ConfigSlider(default=700, increment = 100, limits=(0, 5000))"
		exec (cmd)
		cmd = "config.inputDevices." + device + ".delay.addNotifier(self.inputDevicesDelayChanged,config.inputDevices." + device + ".delay)"
		exec (cmd)
Ejemplo n.º 2
0
 def __init__(self):
     Renderer.__init__(self)
     self.PicLoad = ePicLoad()
     self.PicLoad.PictureData.get().append(self.updatePicon)
     self.piconsize = (0, 0)
     self.pngname = ""
     self.lastPath = None
     if getBoxType() == "vuultimo":
         pngname = findLcdPicon("lcd_picon_default")
     else:
         pngname = findLcdPicon("picon_default")
     self.defaultpngname = None
     if not pngname:
         if getBoxType() == "vuultimo":
             tmp = resolveFilename(SCOPE_ACTIVE_SKIN, "lcd_picon_default.png")
         else:
             tmp = resolveFilename(SCOPE_ACTIVE_SKIN, "picon_default.png")
         if pathExists(tmp):
             pngname = tmp
         else:
             if getBoxType() == "vuultimo":
                 pngname = resolveFilename(SCOPE_ACTIVE_SKIN, "lcd_picon_default.png")
             else:
                 pngname = resolveFilename(SCOPE_ACTIVE_SKIN, "picon_default.png")
     if os.path.getsize(pngname):
         self.defaultpngname = pngname
Ejemplo n.º 3
0
def Plugins(**kwargs):
	from enigma import getBoxType
	if nimmanager.hasNimType("DVB-S") and (getBoxType().startswith('et') or getBoxType().startswith('vu') or getBoxType() == "osmini"):
		for n in nimmanager.nim_slots:
			if n.isCompatible("DVB-S") and n.description not in _unsupportedNims:
				return PluginDescriptor(name=_("Blind scan"), description=_("Scan satellites for new transponders"), where = PluginDescriptor.WHERE_MENU, fnc=BlindscanSetup)
	return []
Ejemplo n.º 4
0
	def vrime(self):
		self.RecordingLed()
		if not getBoxType() == 'gb800se' and not getBoxType() == 'gb800solo':
			self.zaPrik.start(self.updatetime, 1)
			return

		if (config.plugins.VFD_Giga.showClock.value == 'True' or config.plugins.VFD_Giga.showClock.value == 'False' or config.plugins.VFD_Giga.showClock.value == 'True_Switch') and not Screens.Standby.inStandby:
			if config.plugins.VFD_Giga.showClock.value == 'True_Switch':
				if time() >= self.begin:
					self.endkeypress = False
				if self.endkeypress:
					self.__eventInfoChanged()
				else:
					self.prikaz()
			else:
				self.__eventInfoChanged()

		if config.plugins.VFD_Giga.showClock.value == 'Off':
			evfd.getInstance().vfd_write_string("    ")
			self.zaPrik.start(self.updatetime, 1)
			return
		else:
			self.zaPrik.start(1000, 1)

		if Screens.Standby.inStandby or config.plugins.VFD_Giga.showClock.value == 'True_All':
			self.prikaz()
Ejemplo n.º 5
0
	def __init__(self):
		self.last_modes_preferred =  [ ]
		self.on_hotplug = CList()
		self.current_mode = None
		self.current_port = None

		self.readAvailableModes()

		if self.modes.has_key("DVI-PC") and not self.getModeList("DVI-PC"):
			print "remove DVI-PC because of not existing modes"
			del self.modes["DVI-PC"]
		if getBoxType() == 'gbquad' or getBoxType() == 'et5x00' or getBoxType() == 'et6x00':
			del self.modes["Scart"]
		if getBoxType() == 'tm2t' or getBoxType() == 'tmsingle':
			del self.modes["YPbPr"]

		self.createConfig()
		self.readPreferredModes()


		# take over old AVSwitch component :)
		from Components.AVSwitch import AVSwitch
		config.av.aspectratio.notifiers = [ ]
		config.av.tvsystem.notifiers = [ ]
		config.av.wss.notifiers = [ ]
		AVSwitch.getOutputAspect = self.getOutputAspect

		config.av.aspect.addNotifier(self.updateAspect)
		config.av.wss.addNotifier(self.updateAspect)
		config.av.policy_169.addNotifier(self.updateAspect)
		config.av.policy_43.addNotifier(self.updateAspect)
Ejemplo n.º 6
0
	def showTvButton(self):
		if enigma.getBoxType().startswith('gb'):
			self.toogleTvRadio()
		elif enigma.getBoxType() == 'ventonhdx':
			self.showMovies()
		else:
			self.showTv()
Ejemplo n.º 7
0
	def __init__(self, session):
		self.skin = OSD3DSetupScreen.skin
		Screen.__init__(self, session)
		self.setup_title = _("OSD 3D Setup")
		self.skinName = "Setup"
		self["status"] = StaticText()
		self["HelpWindow"] = Pixmap()
		self["HelpWindow"].hide()
		self["key_red"] = StaticText(_("Cancel"))
		self["key_green"] = StaticText(_("OK"))
		self["info1"] = Label(_("Use arrows Up/Down to select"))
		self["info2"] = Label(_("Use arrows Left/Right to adjust"))

		self["actions"] = ActionMap(["SetupActions"],
			{
				"cancel": self.keyCancel,
				"save": self.keySave,
			}, -2)

		self.onChangedEntry = [ ]
		self.list = []
		ConfigListScreen.__init__(self, self.list, session = self.session, on_change = self.changedEntry)
		self.list.append(getConfigListEntry(_("3D Mode"), config.osd.threeDmode, _("This option lets you choose the 3D mode")))
		self.list.append(getConfigListEntry(_("Depth"), config.osd.threeDznorm, _("This option lets you adjust the 3D depth")))
		if getBoxType() == 'gb800se' or getBoxType() == 'gb800solo' or getBoxType() == 'gb800ue':
			self.list.append(getConfigListEntry(_("Set Mode"), config.osd.threeDsetmode, _("This option lets you adjust the 3D mode")))
		self.list.append(getConfigListEntry(_("Show in extensions list ?"), config.osd.show3dextensions, _("This option lets you show the option in the extension screen")))
		self["config"].list = self.list
		self["config"].l.setList(self.list)

		self.onLayoutFinish.append(self.layoutFinished)
		if not self.selectionChanged in self["config"].onSelectionChanged:
			self["config"].onSelectionChanged.append(self.selectionChanged)
		self.selectionChanged()
Ejemplo n.º 8
0
def profile(id):
	now = time.time() - profile_start
	if profile_file:
		profile_file.write("%7.3f\t%s\n" % (now, id))

		if id in profile_data:
			t = profile_data[id]
			if total_time:
				perc = t * (PERCENTAGE_END - PERCENTAGE_START) / total_time + PERCENTAGE_START
			else:
				perc = PERCENTAGE_START
			try:
				if getBoxType() == "odinm7":
					f = open("/dev/dbox/oled0", "w")
					f.write("%d" % perc)
				elif getBoxType() == "gb800se" or getBoxType() == "gb800solo":
					f = open("/dev/dbox/oled0", "w")
					f.write("%d  \n" % perc)					
				elif getBoxType() == "ebox5000":
					f = open("/proc/progress", "w")
					f.write("%d" % perc)
				else:
					f = open("/proc/progress", "w")
					f.write("%d \n" % perc)
				f.close()
			except IOError:
				pass
Ejemplo n.º 9
0
	def __init__(self):
		self.last_modes_preferred =  [ ]
		self.on_hotplug = CList()
		self.current_mode = None
		self.current_port = None

		self.readAvailableModes()

		if self.modes.has_key("DVI-PC") and not self.getModeList("DVI-PC"):
			print "remove DVI-PC because of not existing modes"
			del self.modes["DVI-PC"]
		if getBoxType() == 'et4x00' or getBoxType() == 'xp1000' or getBoxType() == 'iqonios300hd' or getBoxType() == 'tm2t' or getBoxType() == 'tmsingle' or getBoxType() == 'tmnano' or getBoxType() == 'odimm7' or model == 'ini-3000' or getBoxType() == 'vusolo2' or getBoxType() == 'e3hd' or getBoxType() == 'dm500hd' or getBoxType() == 'dm800' or getBoxType() == 'ebox7358' or getBoxType() == 'ebox5100' or getBoxType() == 'ixusszero' or getBoxType() == 'optimussos1':
			del self.modes["YPbPr"]
		if self.hw_type == 'elite' or self.hw_type == 'premium' or self.hw_type == 'premium+' or self.hw_type == 'ultra' or self.hw_type == "me" or self.hw_type == "minime" : self.readPreferredModes()	

		self.createConfig()
		self.readPreferredModes()

		# take over old AVSwitch component :)
		from Components.AVSwitch import AVSwitch
		config.av.aspectratio.notifiers = [ ]
		config.av.tvsystem.notifiers = [ ]
		config.av.wss.notifiers = [ ]
		AVSwitch.getOutputAspect = self.getOutputAspect

		config.av.aspect.addNotifier(self.updateAspect)
		config.av.wss.addNotifier(self.updateAspect)
		config.av.policy_169.addNotifier(self.updateAspect)
		config.av.policy_43.addNotifier(self.updateAspect)
Ejemplo n.º 10
0
	def __eventInfoChanged(self):
		self.RecordingLed()
		if not getBoxType() == 'gb800se' and not getBoxType() == 'gb800solo':
			return
		if config.plugins.VFD_Giga.showClock.value == 'Off' or config.plugins.VFD_Giga.showClock.value == 'True_All':
			return
		service = self.session.nav.getCurrentService()
		info = service and service.info()
		if info is None:
			chnr = "---"
		else:
			chnr = self.getchannelnr()
		info = None
		service = None
		########## Center Channel number #################
		t = len(chnr)
		if t == 1:
			CentChnr = " 0" + chnr + "  " + '\n'
		elif t == 2:
			CentChnr = " " + chnr + " " + '\n'
		elif t == 3:
			CentChnr = "0" + chnr + '\n'
		else:
			CentChnr = chnr + '\n'
		#################################################

		open("/proc/vfd", "w").write(CentChnr)
Ejemplo n.º 11
0
 def Qsoftware(self):
     self.sublist = []
     self.sublist.append(
         QuickSubMenuEntryComponent(
             "Software Update",
             _("Online software update"),
             _("Check/Install online updates (you must have a working internet connection)"),
         )
     )
     if (
         not getBoxType().startswith("az")
         and not getBoxType().startswith("dream")
         and not getBoxType().startswith("ebox")
     ):
         self.sublist.append(
             QuickSubMenuEntryComponent(
                 "Flash Online", _("Flash Online a new image"), _("Flash on the fly your your Receiver software.")
             )
         )
     self.sublist.append(
         QuickSubMenuEntryComponent(
             "Complete Backup",
             _("Backup your current image"),
             _("Backup your current image to HDD or USB. This will make a 1:1 copy of your box"),
         )
     )
     self.sublist.append(
         QuickSubMenuEntryComponent(
             "Backup Settings",
             _("Backup your current settings"),
             _("Backup your current settings. This includes E2-setup, channels, network and all selected files"),
         )
     )
     self.sublist.append(
         QuickSubMenuEntryComponent(
             "Restore Settings",
             _("Restore settings from a backup"),
             _(
                 "Restore your settings back from a backup. After restore the box will restart to activated the new settings"
             ),
         )
     )
     self.sublist.append(
         QuickSubMenuEntryComponent(
             "Select Backup files",
             _("Choose the files to backup"),
             _(
                 "Here you can select which files should be added to backupfile. (default: E2-setup, channels, network"
             ),
         )
     )
     self.sublist.append(
         QuickSubMenuEntryComponent(
             "Software Manager Setup",
             _("Manage your online update files"),
             _("Here you can select which files should be updated with a online update"),
         )
     )
     self["sublist"].l.setList(self.sublist)
Ejemplo n.º 12
0
	def setColorFormat(configElement):
		if getBoxType() == 'et6x00':
			map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}	
		elif getBoxType() == 'gbquad' or getBoxType().startswith('et'):
			map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
		else:
			map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
		iAVSwitch.setColorFormat(map[configElement.getValue()])
Ejemplo n.º 13
0
	def revert(self):
		for count in range(fancontrol.getFanCount()):
			if not getBoxType().startswith('tm') or not getBoxType().startswith('vu'):
				fancontrol.getConfig(count).vlt.load()
			fancontrol.getConfig(count).pwm.load()
			if not getBoxType().startswith('tm') or not getBoxType().startswith('vu'):
				fancontrol.getConfig(count).vlt_standby.load()
			fancontrol.getConfig(count).pwm_standby.load()
		self.close()
Ejemplo n.º 14
0
	def readRcTypeFromProc(self):
		if os.path.exists('/proc/stb/info/hwmodel'):
			model = self.readFile('/proc/stb/info/hwmodel')
			if model == 'tmtwinoe' or model == 'tm2toe' or model == 'tmsingle':
				self.currentRcType = self.RCTYPE_TM
		elif os.path.exists('/proc/stb/info/vumodel'):
			model = self.readFile('/proc/stb/info/vumodel')
			if model == 'ultimo':
				self.currentRcType = self.RCTYPE_VU2
			else:
				self.currentRcType = self.RCTYPE_VU
		elif getBoxType() == 'dm8000':
				self.currentRcType = self.RCTYPE_DMM
		elif getBoxType() == 'dm7020hd':
				self.currentRcType = self.RCTYPE_DMM2
		elif getBoxType() == 'dm800' or getBoxType() == 'dm800se' or getBoxType() == 'dm500hd':
				self.currentRcType = self.RCTYPE_DMM1
		elif os.path.exists('/proc/stb/info/boxtype'):
			model = self.readFile('/proc/stb/info/boxtype')
			if model.startswith('et') or model.startswith('xp'):
				rc = self.readFile('/proc/stb/ir/rc/type')
				if rc == '3':
					self.currentRcType = self.RCTYPE_ODIN
				if rc == '4':
					self.currentRcType = self.RCTYPE_DMM
				elif rc == '5' and model == 'et9200':
					self.currentRcType = self.RCTYPE_ODIN
				elif rc == '5':
					self.currentRcType = self.RCTYPE_ET9X00
				elif rc == '6':
					self.currentRcType = self.RCTYPE_DMM
				elif rc == '7':
					self.currentRcType = self.RCTYPE_ET6X00
				elif rc == '8':
					self.currentRcType = self.RCTYPE_VU
				elif rc == '9' and model == 'et9500':
					self.currentRcType = self.RCTYPE_ET9500
				elif rc == '9' and model == 'et6500':
					self.currentRcType = self.RCTYPE_ET6500
				elif rc == '11' and model == 'et9200':
					self.currentRcType = self.RCTYPE_ET9500
				elif rc == '11' and model == 'et9000':
					self.currentRcType = self.RCTYPE_ET9X00
				elif rc == '13' and model == 'et4000':
					self.currentRcType = self.RCTYPE_ET4X00
				elif rc == '14':
					self.currentRcType = self.RCTYPE_XP1000
			elif model == 'gigablue':
				self.currentRcType = self.RCTYPE_GB
			elif model == 'ini-3000':
				self.currentRcType = self.RCTYPE_INI3000
			elif model == 'ini-5000':
				self.currentRcType = self.RCTYPE_INI5000
			elif model == 'ini-7000':
				self.currentRcType = self.RCTYPE_INI7000
			elif model == 'xp1000':
				self.currentRcType = self.RCTYPE_XP1000
Ejemplo n.º 15
0
def setConfiguredSettings():
    if SystemInfo["CanChange3DOsd"]:
        if getBoxType() == "gb800se" or getBoxType() == "gb800solo" or getBoxType() == "gb800ue":
            applySettings2(
                config.osd.threeDmode.getValue(),
                int(config.osd.threeDznorm.getValue()),
                config.osd.threeDsetmode.getValue(),
            )
        else:
            applySettings(config.osd.threeDmode.getValue(), int(config.osd.threeDznorm.getValue()))
Ejemplo n.º 16
0
	def __init__(self, session, parent):
		Screen.__init__(self, session, parent = parent)
		if about.getImageTypeString() == 'Release':
			self["selected"] = StaticText("ViX:" + about.getImageVersionString() + ' (R)')
		elif about.getImageTypeString() == 'Experimental':
			self["selected"] = StaticText("ViX:" + about.getImageVersionString() + ' (B)')
		if getBoxType() == 'vuuno':
			self["BoxType"] = StaticText(_("Hardware:") + " Vu+ Uno")
		elif getBoxType() == 'vuultimo':
			self["BoxType"] = StaticText(_("Hardware:") + " Vu+ Ultimo")
		elif getBoxType() == 'vusolo':
			self["BoxType"] = StaticText(_("Hardware:") + " Vu+ Solo")
		elif getBoxType() == 'vuduo':
			self["BoxType"] = StaticText(_("Hardware:") + " Vu+ Duo")
		elif getBoxType() == 'et5x00':
			self["BoxType"] = StaticText(_("Hardware:") + " Xtrend ET5x00 Series")
		elif getBoxType() == 'et6x00':
			self["BoxType"] = StaticText(_("Hardware:") + " Xtrend ET6x00 Series")
		elif getBoxType() == 'et9x00':
			self["BoxType"] = StaticText(_("Hardware:") + " Xtrend ET9x00 Series")
		elif getBoxType() == 'odin':
			self["BoxType"] = StaticText(_("Hardware:") + " Odin")
		else:
			self["BoxType"] = StaticText(_("Hardware:") + " " + getBoxType())
		self["KernelVersion"] = StaticText(_("Kernel:") + " " + about.getKernelVersionString())
		self["ImageType"] = StaticText(_("Image:") + " " + about.getImageTypeString())
		self["ImageVersion"] = StaticText(_("Version:") + " " + about.getImageVersionString() + "   " + _("Build:") + " " + about.getBuildVersionString())
		self["EnigmaVersion"] = StaticText(_("Last Update:") + " " + about.getLastUpdateString())
Ejemplo n.º 17
0
def onMountpointRemoved(mountpoint):
	global searchPaths
	if getBoxType() == 'vuultimo' or getBoxType() == 'inihdp':
		path = os.path.join(mountpoint, 'piconlcd') + '/'
	else:
		path = os.path.join(mountpoint, 'picon') + '/'
	try:
		searchPaths.remove(path)
		print "[LcdPicon] removed path:", path
	except:
		pass
Ejemplo n.º 18
0
	def setColorFormat(configElement):
		if config.av.videoport and config.av.videoport.getValue() == "Scart-YPbPr":
			iAVSwitch.setColorFormat(3)
		else:
			if getBoxType() == 'et6x00':
				map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}	
			elif getBoxType() == 'gbquad' or getBoxType() == 'gbquadplus' or getBoxType().startswith('et'):
				map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
			else:
				map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
			iAVSwitch.setColorFormat(map[configElement.getValue()])
Ejemplo n.º 19
0
	def Qsoftware(self):
		self.sublist = []
		self.sublist.append(QuickSubMenuEntryComponent('Software Update', _('Online software update'), _('Check/Install online updates (you must have a working internet connection)')))
		if not getBoxType().startswith('az') and not getBoxType().startswith('dream') and not getBoxType().startswith('ebox'):
			self.sublist.append(QuickSubMenuEntryComponent('Flash Online', _('Flash Online a new image'), _('Flash on the fly your Receiver software.')))
		self.sublist.append(QuickSubMenuEntryComponent('Complete Backup', _('Backup your current image'), _('Backup your current image to HDD or USB. This will make a 1:1 copy of your box')))
		self.sublist.append(QuickSubMenuEntryComponent('Backup Settings', _('Backup your current settings'), _('Backup your current settings. This includes E2-setup, channels, network and all selected files')))
		self.sublist.append(QuickSubMenuEntryComponent('Restore Settings', _('Restore settings from a backup'), _('Restore your settings back from a backup. After restore the box will restart to activate the new settings')))
		self.sublist.append(QuickSubMenuEntryComponent('Select Backup files', _('Choose the files to backup'), _('Here you can select which files should be added to backupfile. (default: E2-setup, channels, network)')))
		self.sublist.append(QuickSubMenuEntryComponent('Software Manager Setup', _('Manage your online update files'), _('Here you can select which files should be updated with a online update')))
		self['sublist'].l.setList(self.sublist)
Ejemplo n.º 20
0
def setRTCtime(wutime):
	if getBoxType().startswith('gb')or getBoxType().startswith('ini'):
		setRTCoffset()
	try:
		f = open("/proc/stb/fp/rtc", "w")
		f.write(str(wutime))
		f.close()
	except IOError:
		try:
			fp = open("/dev/dbox/fp0")
			ioctl(fp.fileno(), 0x101, pack('L', wutime)) # set wake up
			fp.close()
		except IOError:
			print "setRTCtime failed!"
Ejemplo n.º 21
0
	def vrime(self):
		self.RecordingLed()
		if not getBoxType() == 'gb800se' and not getBoxType() == 'gb800solo':
			self.zaPrik.start(self.updatetime, 1)
			return
		if config.plugins.VFD_Giga.showClock.value == 'Off':
			evfd.getInstance().vfd_write_string("    ")
			self.zaPrik.start(self.updatetime, 1)
			return
		else:
			self.zaPrik.start(1000, 1)

		if Screens.Standby.inStandby or config.plugins.VFD_Giga.showClock.value == 'True_All':
			self.prikaz()
Ejemplo n.º 22
0
def onMountpointAdded(mountpoint):
	global searchPaths
	try:
		if getBoxType() == 'vuultimo' or getBoxType() == 'inihdp':
			path = os.path.join(mountpoint, 'piconlcd') + '/'
		else:
			path = os.path.join(mountpoint, 'picon') + '/'
		if os.path.isdir(path) and path not in searchPaths:
			for fn in os.listdir(path):
				if fn.endswith('.png'):
					print "[LcdPicon] adding path:", path
					searchPaths.append(path)
					break
	except Exception, ex:
		print "[LcdPicon] Failed to investigate %s:" % mountpoint, ex
Ejemplo n.º 23
0
	def __init__(self, session, args = None):
		Screen.__init__(self, session)
		Screen.setTitle(self, _("Fan Control"))

		templist = sensors.getSensorsList(sensors.TYPE_TEMPERATURE)
		tempcount = len(templist)
		fanlist = sensors.getSensorsList(sensors.TYPE_FAN_RPM)
		fancount = len(fanlist)

		self["red"] = StaticText(_("Cancel"))
		self["green"] = StaticText(_("OK"))

		for count in range(8):
			if count < tempcount:
				id = templist[count]
				if not getBoxType().startswith('tm') and not getBoxType().startswith('vu'):
					self["SensorTempText%d" % count] = StaticText(sensors.getSensorName(id))
					self["SensorTemp%d" % count] = SensorSource(sensorid = id)
				elif getBoxType().startswith('tm') or getBoxType().startswith('vu') and id < 1:
					self["SensorTempText%d" % count] = StaticText(sensors.getSensorName(id))
					self["SensorTemp%d" % count] = SensorSource(sensorid = id)
				else:
					self["SensorTempText%d" % count] = StaticText("")
					self["SensorTemp%d" % count] = SensorSource()
			else:
				self["SensorTempText%d" % count] = StaticText("")
				self["SensorTemp%d" % count] = SensorSource()

			if count < fancount:
				id = fanlist[count]
				self["SensorFanText%d" % count] = StaticText(sensors.getSensorName(id))
				self["SensorFan%d" % count] = SensorSource(sensorid = id)
			else:
				self["SensorFanText%d" % count] = StaticText("")
				self["SensorFan%d" % count] = SensorSource()

		self.list = []
		for count in range(fancontrol.getFanCount()):
			if not getBoxType().startswith('tm') and not getBoxType().startswith('vu'):
				self.list.append(getConfigListEntry(_("Fan %d voltage") % (count + 1), fancontrol.getConfig(count).vlt))
			self.list.append(getConfigListEntry(_("Fan %d PWM") % (count + 1), fancontrol.getConfig(count).pwm))
			if not getBoxType().startswith('tm') and not getBoxType().startswith('vu'):
				self.list.append(getConfigListEntry(_("Standby fan %d voltage") % (count + 1), fancontrol.getConfig(count).vlt_standby))
			self.list.append(getConfigListEntry(_("Standby fan %d PWM") % (count + 1), fancontrol.getConfig(count).pwm_standby))

		ConfigListScreen.__init__(self, self.list, session = self.session)
		#self["config"].list = self.list
		#self["config"].setList(self.list)
		self["config"].l.setSeperation(300)

		self["actions"] = ActionMap(["OkCancelActions", "ColorActions", "MenuActions"],
		{
			"ok": self.save,
			"cancel": self.revert,
			"red": self.revert,
			"green": self.save,
			"menu": self.closeRecursive,
		}, -1)
Ejemplo n.º 24
0
	def checkTraficLight(self):
		self.activityTimer.callback.remove(self.checkTraficLight)
		self.activityTimer.start(100, False)
		message = ""
		picon = None
		try:
			# TODO: Use Twisted's URL fetcher, urlopen is evil. And it can
			# run in parallel to the package update.
			url = "https://openpli.org/status/"
			try:
				status = urlopen(url, timeout=5).read().split('!', 1)
			except:
				# OpenPli 5.0 uses python 2.7.11 and here we need to bypass the certificate check
				from ssl import _create_unverified_context
				status = urlopen(url, timeout=5, context=_create_unverified_context()).read().split('!', 1)
				print status
			if getBoxType() in status[0].split(','):
				message = len(status) > 1 and status[1] or _("The current image might not be stable.\nFor more information see %s.") % ("www.openpli.org")
				# strip any HTML that may be in the message, but retain line breaks
				import re
				message = message.replace("<br />", "\n\n").replace("<br>", "\n\n")
				message = re.sub('<[^<]+?>', '', re.sub('&#8209;', '-', message))
				picon = MessageBox.TYPE_ERROR
		except:
			message = _("The status of the current image could not be checked because %s can not be reached.") % ("www.openpli.org")
			picon = MessageBox.TYPE_ERROR
		if message != "":
			message += "\n" + _("Do you want to update your receiver?")
			self.session.openWithCallback(self.startActualUpdate, MessageBox, message, picon = picon)
		else:
			self.startActualUpdate(True)
Ejemplo n.º 25
0
	def __init__(self,session):
		Screen.__init__(self,session)
		self.setTitle(_("Transcoding Setup"))
		TEXT = _("Transcoding can be started when there is no corresponding channel recordings.")
		if getBoxType() == "vusolo2":
			TEXT += _("\nWhen transcoding, both PIP and analog video outputs are disabled.")
		else:
			TEXT += _("\nWhen transcoding, PIP is disabled.")
		self.session = session
		self["shortcuts"] = ActionMap(["ShortcutActions", "SetupActions" ],
		{
			"ok": self.keySave,
			"cancel": self.keyCancel,
			"red": self.keyCancel,
			"green": self.keySave,
			"yellow" : self.KeyDefault,
		}, -2)
		self.list = []
		ConfigListScreen.__init__(self, self.list,session = self.session)
		self["key_red"] = StaticText(_("Cancel"))
		self["key_green"] = StaticText(_("Save"))
		self["key_yellow"] = StaticText(_("Default"))
		self["text"] = StaticText(_("%s")%TEXT)
		self.createSetup()
		self.onLayoutFinish.append(self.checkEncoder)
		self.invaliedModelTimer = eTimer()
		self.invaliedModelTimer.callback.append(self.invalidmodel)
		global transcodingsetupinit
		transcodingsetupinit.pluginsetup = self
		self.onClose.append(self.onClosed)
Ejemplo n.º 26
0
 def __init__(self):
     Renderer.__init__(self)
     VariableText.__init__(self)
     if getBoxType() == 'inihdp':
         self.stringlength = 25
     else:
         self.stringlength = 12
Ejemplo n.º 27
0
	def checkTraficLight(self):

		self.activityTimer.callback.remove(self.checkTraficLight)
		self.activityTimer.start(100, False)

		currentTimeoutDefault = socket.getdefaulttimeout()
		socket.setdefaulttimeout(3)
		message = ""
		picon = None
		default = True
		try:
			# TODO: Use Twisted's URL fetcher, urlopen is evil. And it can
			# run in parallel to the package update.
			status = urlopen("http://openpli.org/status/").read().split('!', 1)
			if getBoxType() in status[0].split(','):
				message = len(status) > 1 and status[1] or _("The current beta image might not be stable.\nFor more information see %s.") % ("www.openpli.org")
				picon = MessageBox.TYPE_ERROR
				default = False
		except:
			message = _("The status of the current beta image could not be checked because %s can not be reached.") % ("www.openpli.org")
			picon = MessageBox.TYPE_ERROR
			default = False
		socket.setdefaulttimeout(currentTimeoutDefault)
		if default:
			self.showDisclaimer()
		else:
			message += "\n" + _("Do you want to update your receiver?")
			self.session.openWithCallback(self.startActualUpdate, MessageBox, message, default = default, picon = picon)
Ejemplo n.º 28
0
def getBackupPath():
	backuppath = config.plugins.configurationbackup.backuplocation.getValue()
	box = getBoxType()
	if backuppath.endswith('/'):
		return backuppath + 'backup_' + box
	else:
		return backuppath + '/backup_' + box
Ejemplo n.º 29
0
	def doRun(self, tmp_list, tmp_pol, tmp_band):
		def GetCommand(nimIdx):
			_nimSocket = self.nimSockets
			try:
				sName = _nimSocket[str(nimIdx)][0]
				sType = _supportNimType[sName]
				return "vuplus_%(TYPE)sblindscan"%{'TYPE':sType}, sName
			except: pass
			return "vuplus_blindscan", ""
		if getBoxType().startswith('vu'):
			self.binName,nimName =  GetCommand(self.scan_nims.value)

			self.makeNimSocket(nimName)
			if self.binName is None:
				self.session.open(MessageBox, "Blindscan is not supported in " + nimName + " tuner.", MessageBox.TYPE_ERROR)
				print nimName + " does not support blindscan."
				return

		self.full_data = ""
		self.total_list=[]
		for x in tmp_list:
			for y in tmp_pol:
				for z in tmp_band:
					self.total_list.append([x,y,z])
					print "add scan item : ", x, ", ", y, ", ", z

		self.max_count = len(self.total_list)
		self.is_runable = True
		self.running_count = 0
		self.clockTimer = eTimer()
		self.clockTimer.callback.append(self.doClock)
		self.clockTimer.start(1000)
Ejemplo n.º 30
0
 def __init__(self):
     Renderer.__init__(self)
     VariableText.__init__(self)
     if getBoxType() == 'vuduo':
         self.stringlength = 16
     else:
         self.stringlength = 12
Ejemplo n.º 31
0
def profile(id):
    now = time.time() - profile_start
    if profile_file:
        profile_file.write("%7.3f\t%s\n" % (now, id))

        if id in profile_data:
            t = profile_data[id]
            if total_time:
                perc = t * (PERCENTAGE_END -
                            PERCENTAGE_START) / total_time + PERCENTAGE_START
            else:
                perc = PERCENTAGE_START
            try:
                if getBoxType() == "odinm7" or getBoxType(
                ) == "odinm6" or getBoxType() == "xp1000s":
                    f = open("/dev/dbox/oled0", "w")
                    f.write("%d" % perc)
                elif getBoxType() == "gb800se" or getBoxType() == "gb800solo":
                    f = open("/dev/dbox/oled0", "w")
                    f.write("%d  \n" % perc)
                elif getBoxType() == "ebox5000":
                    f = open("/proc/progress", "w")
                    f.write("%d" % perc)
                else:
                    f = open("/proc/progress", "w")
                    f.write("%d \n" % perc)
                f.close()
            except IOError:
                pass
Ejemplo n.º 32
0
    def getTempSensor(self):
        if getBoxType() not in ("dm7020hd", "dm7020hdv2"):
            try:
                sensor_info = sensors.getSensorsList(sensors.TYPE_TEMPERATURE)
            except:
                return 'Temp: N/A'
                sensor_info = None

            if sensor_info is not None:
                if len(sensor_info) > 0:
                    return 'Temp: %s\xc2\xb0C' % sensors.getSensorValue(
                        sensor_info[0])
        return 'Temp: No Sensor'
Ejemplo n.º 33
0
def mainInMenu(menuid, **kwargs):
    if getBoxType() in ("gbipbox", "gbx2"):
        if menuid == "setup":
            return [(_("Remote channel stream converter"), main,
                     "streamconvert", 20)]
        else:
            return []
    else:
        if menuid == "scan":
            return [(_("Remote channel stream converter"), main,
                     "streamconvert", 99)]
        else:
            return []
Ejemplo n.º 34
0
	def Recording(self):
		if fileExists("/proc/stb/lcd/symbol_circle"):
			recordings = len(NavigationInstance.instance.getRecordings())
			if recordings > 0:
				open("/proc/stb/lcd/symbol_circle", "w").write("3")
			else:
				open("/proc/stb/lcd/symbol_circle", "w").write("0")
		elif getBoxType() == 'ebox5000':
			recordings = len(NavigationInstance.instance.getRecordings())
			if recordings > 0:
				open("/proc/stb/lcd/symbol_recording", "w").write("1")
			else:
				open("/proc/stb/lcd/symbol_recording", "w").write("0")
		elif getBoxType() == 'ixussone':
			recordings = len(NavigationInstance.instance.getRecordings())
			self.blink = not self.blink
			if recordings > 0 and self.blink:
				open("/proc/stb/lcd/powerled", "w").write("1")
			else:
				open("/proc/stb/lcd/powerled", "w").write("0")

		else:
			if not fileExists("/proc/stb/lcd/symbol_recording") or not fileExists("/proc/stb/lcd/symbol_record_1") or not fileExists("/proc/stb/lcd/symbol_record_2"):
				return
	
			recordings = len(NavigationInstance.instance.getRecordings())
		
			if recordings > 0:
				open("/proc/stb/lcd/symbol_recording", "w").write("1")
				if recordings == 1:
					open("/proc/stb/lcd/symbol_record_1", "w").write("1")
					open("/proc/stb/lcd/symbol_record_2", "w").write("0")
				elif recordings >= 2:
					open("/proc/stb/lcd/symbol_record_1", "w").write("1")
					open("/proc/stb/lcd/symbol_record_2", "w").write("1")
			else:
				open("/proc/stb/lcd/symbol_recording", "w").write("0")
				open("/proc/stb/lcd/symbol_record_1", "w").write("0")
				open("/proc/stb/lcd/symbol_record_2", "w").write("0")
Ejemplo n.º 35
0
    def __init__(self):
        if HardwareInfo.device_name is not None:
            #			print "using cached result"
            return

        HardwareInfo.device_name = "unknown"
        try:
            file = open("/proc/stb/info/model", "r")
            HardwareInfo.device_name = file.readline().strip()
            file.close()
            if getBoxType().startswith('tm') or getBoxType().startswith(
                    'iqon') or getBoxType().startswith(
                        'media') or getBoxType().startswith('opti'):
                HardwareInfo.device_name = "dm800se"
            try:
                file = open("/proc/stb/info/version", "r")
                HardwareInfo.device_version = file.readline().strip()
                file.close()
            except:
                pass
        except:
            print "----------------"
            print "you should upgrade to new drivers for the hardware detection to work properly"
            print "----------------"
            print "fallback to detect hardware via /proc/cpuinfo!!"
            try:
                rd = open("/proc/cpuinfo", "r").read()
                if rd.find("Brcm4380 V4.2") != -1:
                    HardwareInfo.device_name = "dm8000"
                    print "dm8000 detected!"
                elif rd.find("Brcm7401 V0.0") != -1:
                    HardwareInfo.device_name = "dm800"
                    print "dm800 detected!"
                elif rd.find("MIPS 4KEc V4.8") != -1:
                    HardwareInfo.device_name = "dm7025"
                    print "dm7025 detected!"
            except:
                pass
Ejemplo n.º 36
0
	def __init__(self):
		if pathExists('/proc/stb/ir/rc/type') and pathExists('/proc/stb/info/boxtype'):
			self.isSupported = True

			fd = open('/proc/stb/info/boxtype', 'r')
			self.boxType = fd.read()
			fd.close()

			if config.plugins.remotecontroltype.rctype.getValue() != 0:
				self.writeRcType(config.plugins.remotecontroltype.rctype.getValue())
		else:
			self.isSupported = False
		if getBoxType().startswith('gb'):
			self.isSupported = False			
Ejemplo n.º 37
0
def setRTCtime(wutime):
    if getBoxType().startswith('gb'):
        setRTCoffset()
    try:
        f = open("/proc/stb/fp/rtc", "w")
        f.write(str(wutime))
        f.close()
    except IOError:
        try:
            fp = open("/dev/dbox/fp0")
            ioctl(fp.fileno(), 0x101, pack('L', wutime))  # set wake up
            fp.close()
        except IOError:
            print "setRTCtime failed!"
Ejemplo n.º 38
0
def onMountpointAdded(mountpoint):
    global searchPaths
    try:
        if getBoxType() == 'vuultimo':
            path = os.path.join(mountpoint, 'piconlcd') + '/'
        else:
            path = os.path.join(mountpoint, 'picon') + '/'
        if os.path.isdir(path) and path not in searchPaths:
            for fn in os.listdir(path):
                if fn.endswith('.png'):
                    print "[LcdPicon] adding path:", path
                    searchPaths.append(path)
                    break
    except Exception, ex:
        print "[LcdPicon] Failed to investigate %s:" % mountpoint, ex
Ejemplo n.º 39
0
    def listInputChannels(self):
        hw_type = getBoxType()
        has_hdmi = HardwareInfo().has_hdmi()
        list = []

        for port in self.hw.getPortList():
            if self.hw.isPortUsed(port):
                descr = port
                if descr == 'DVI' and has_hdmi:
                    descr = 'HDMI'
                if port != "DVI-PC":
                    list.append((descr, port))
        list.sort(key=lambda x: x[0])
        print "[VideoWizard] listInputChannels:", list
        return list
Ejemplo n.º 40
0
 def dualBoot(self):
     if getBoxType() == "et8500":
         rootfs2 = False
         kernel2 = False
         f = open("/proc/mtd")
         l = f.readlines()
         for x in l:
             if 'rootfs2' in x:
                 rootfs2 = True
             if 'kernel2' in x:
                 kernel2 = True
         f.close()
         if rootfs2 and kernel2:
             return True
     return False
Ejemplo n.º 41
0
 def box(self):
     box = getBoxType()
     if image != 2:
         machinename = getMachineName()
         if box == 'odinm6':
             box = getMachineName().lower()
         elif box == "inihde" and machinename.lower() == "xpeedlx":
             box = "xpeedlx"
         elif box == "inihde" and machinename.lower() == "hd-1000":
             box = "sezam-1000hd"
         elif box == "ventonhdx" and machinename.lower() == "hd-5000":
             box = "sezam-5000hd"
         elif box == "ventonhdx" and machinename.lower() == "premium twin":
             box = "miraclebox-twin"
     return box
Ejemplo n.º 42
0
def configStrings(iface):
	driver = iNetwork.detectWlanModule(iface)
	ret = ""
	if existBcmWifi(iface):
		encryption = config.plugins.wlan.encryption.value
		psk = config.plugins.wlan.psk.value
		essid = config.plugins.wlan.essid.value
		ret += '\tpre-up wl-config.sh -m ' + encryption.lower() + ' -k "' + psk + '" -s "' + essid + '" \n'
		ret += '\tpost-down wl-down.sh\n'
	else:
		if (driver == 'madwifi' or getBoxType() == "dm8000") and config.plugins.wlan.hiddenessid.value:
			ret += "\tpre-up iwconfig " + iface + " essid \"" + re.escape(config.plugins.wlan.essid.value) + "\" || true\n"
		ret += "\tpre-up wpa_supplicant -i" + iface + " -c" + getWlanConfigName(iface) + " -B -dd -D" + driver + " || true\n"
		ret += "\tpre-down wpa_cli -i" + iface + " terminate || true\n"
	return ret
Ejemplo n.º 43
0
def Plugins(**kwargs):
    if getBoxType() == "spark":
        return [
            PluginDescriptor(where=[
                PluginDescriptor.WHERE_AUTOSTART,
                PluginDescriptor.WHERE_SESSIONSTART
            ],
                             fnc=sessionstart),
            PluginDescriptor(name="LED Display Setup",
                             description="Change VFD display settings",
                             where=PluginDescriptor.WHERE_MENU,
                             fnc=main)
        ]
    else:
        return []
Ejemplo n.º 44
0
	def __evUpdatedInfo(self):
		self.service = self.session.nav.getCurrentService()
		if getBoxType() in ("dinoboth265","axashistwin"):
			self.Resolution()
			self.Audio()
			self.Crypted()
			self.Teletext()
			self.Hbbtv()
			self.PauseSymbol()
			self.PlaySymbol()
			self.PowerSymbol()
			self.Timer()
		self.Subtitle()
		self.ParentalControl()
		del self.service
Ejemplo n.º 45
0
 def createSetup(self):
     self.list = []
     if fileExists("/proc/stb/encoder/0/vcodec"):
         self.list.append(
             getConfigListEntry(_("Bitrate in bits"),
                                config.plugins.transcodingsetup.bitrate))
         self.list.append(
             getConfigListEntry(_("Framerate"),
                                config.plugins.transcodingsetup.framerate))
         self.list.append(
             getConfigListEntry(_("Resolution"),
                                config.plugins.transcodingsetup.resolution))
         self.list.append(
             getConfigListEntry(_("Video codec"),
                                config.plugins.transcodingsetup.vcodec))
         self.list.append(
             getConfigListEntry(
                 _("Aspect Ratio"),
                 config.plugins.transcodingsetup.aspectratio))
         self.list.append(
             getConfigListEntry(_("Interlaced"),
                                config.plugins.transcodingsetup.interlaced))
     elif getBoxType() in ("x2plus", "formuler1"):
         self.list.append(
             getConfigListEntry(_("Bitrate in bits"),
                                config.plugins.transcodingsetup.bitrate))
         self.list.append(
             getConfigListEntry(_("Framerate"),
                                config.plugins.transcodingsetup.framerate))
     else:
         self.list.append(
             getConfigListEntry(_("Bitrate in bits"),
                                config.plugins.transcodingsetup.bitrate))
         self.list.append(
             getConfigListEntry(_("Framerate"),
                                config.plugins.transcodingsetup.framerate))
         self.list.append(
             getConfigListEntry(_("Resolution"),
                                config.plugins.transcodingsetup.resolution))
         self.list.append(
             getConfigListEntry(
                 _("Aspect Ratio"),
                 config.plugins.transcodingsetup.aspectratio))
         self.list.append(
             getConfigListEntry(_("Interlaced"),
                                config.plugins.transcodingsetup.interlaced))
     self["config"].list = self.list
     self["config"].l.setList(self.list)
Ejemplo n.º 46
0
	def blindscanContainerClose(self, retval):
		lines = self.full_data.split('\n')
		self.full_data = "" # Clear this string so we don't get duplicates on subsequent runs
		for line in lines:
			data = line.split()
			print "cnt :", len(data), ", data :", data
			if len(data) >= 10 and self.dataIsGood(data) :
				if data[0] == 'OK':
					parm = eDVBFrontendParametersSatellite()
					sys = { "DVB-S" : eDVBFrontendParametersSatellite.System_DVB_S,
						"DVB-S2" : eDVBFrontendParametersSatellite.System_DVB_S2}
					qam = { "QPSK" : parm.Modulation_QPSK,
						"8PSK" : parm.Modulation_8PSK}
					inv = { "INVERSION_OFF" : parm.Inversion_Off,
						"INVERSION_ON" : parm.Inversion_On,
						"INVERSION_AUTO" : parm.Inversion_Unknown}
					fec = { "FEC_AUTO" : parm.FEC_Auto,
						"FEC_1_2" : parm.FEC_1_2,
						"FEC_2_3" : parm.FEC_2_3,
						"FEC_3_4" : parm.FEC_3_4,
						"FEC_5_6": parm.FEC_5_6,
						"FEC_7_8" : parm.FEC_7_8,
						"FEC_8_9" : parm.FEC_8_9,
						"FEC_3_5" : parm.FEC_3_5,
						"FEC_9_10" : parm.FEC_9_10,
						"FEC_NONE" : parm.FEC_None}
					roll ={ "ROLLOFF_20" : parm.RollOff_alpha_0_20,
						"ROLLOFF_25" : parm.RollOff_alpha_0_25,
						"ROLLOFF_35" : parm.RollOff_alpha_0_35}
					pilot={ "PILOT_ON" : parm.Pilot_On,
						"PILOT_OFF" : parm.Pilot_Off}
					pol = {	"HORIZONTAL" : parm.Polarisation_Horizontal,
						"VERTICAL" : parm.Polarisation_Vertical}
					parm.orbital_position = self.orb_position
					if getBoxType().startswith('azbox'):
						parm.polarisation = self.polsave
					else:
						parm.polarisation = pol[data[1]]
					parm.frequency = int(data[2])
					parm.symbol_rate = int(data[3])
					parm.system = sys[data[4]]
					parm.inversion = inv[data[5]]
					parm.pilot = pilot[data[6]]
					parm.fec = fec[data[7]]
					parm.modulation = qam[data[8]]
					parm.rolloff = roll[data[9]]
					self.tmp_tplist.append(parm)
		self.blindscan_session.close(True)
Ejemplo n.º 47
0
	def createConfig(self):
		config.plugins.transcodingsetup = ConfigSubsection()
		config.plugins.transcodingsetup.transcoding = ConfigSelection(default = "enable", choices = [ ("enable", _("enable")), ("disable", _("disable"))] )
		config.plugins.transcodingsetup.port = ConfigSelection(default = "8002", choices = [ ("8001", "8001"), ("8002", "8002")] )
		global TranscodingConfigList
		for x in TranscodingConfigList:
			if x[0] == "Bitrate":
				if getBoxType() == "vusolo2":
					default_bitrate = 400000
				else:
					default_bitrate = 2000000
				config.plugins.transcodingsetup.bitrate = ConfigSelection(default = "500000", choices = [ ("100000", "100 Kbits"), ("500000", "500 Kbits"), ("1000000", "1 Mbits"), ("1500000", "1.5 Mbits"), ("2000000", "2 Mbits"), ("2500000", "2.5 Mbits"), ("3000000", "3 Mbits"), ("3500000", "3.5 Mbits"), ("4000000", "4 Mbits"), ("4500000", "4.5 Mbits"), ("5000000", "5 Mbits")])
				x.append(config.plugins.transcodingsetup.bitrate)
			elif x[0] == "Framerate":
				config.plugins.transcodingsetup.framerate = ConfigSelection(default = "30000", choices = [ ("23976", "23.976 fps"), ("24000", "24 fps"), ("29970", "29.970 fps"), ("30000", "30 fps"), ("59940", "59.940 fps"), ("60000", "60 fps")])
				x.append(config.plugins.transcodingsetup.framerate)
Ejemplo n.º 48
0
	def flashimage(self):
		files = "^.*\.(zip|bin)"
		model = getBoxType()
		if model in ("vuduo","vusolo","vuultimo","vuuno") or model.startswith("ebox"):
			files = "^.*\.(zip|bin|jffs2)"
		elif "4k" or "uhd" in model or model in ("hd51","hd60","hd61","h7","sf4008","sf5008","sf8008","sf8008m","vs1500","et11000","et13000","cc1","multibox","v8plus","e4hdultra"):
			files = "^.*\.(zip|bin|bz2)"
		elif model in ("h9","h9combo","i55plus","h10","dinobotu55","iziboxx3","dinoboth265","axashistwin","protek4kx1"):
			files = "^.*\.(zip|bin|ubi)"
		elif model.startswith("dm"):
			self.session.open(MessageBox, _("No supported receiver found!"), MessageBox.TYPE_ERROR)
			return
		else:
			files = "^.*\.(zip|bin)"
		curdir = '/media/'
		self.session.open(FlashImageConfig, curdir, files)
Ejemplo n.º 49
0
def Plugins(**kwargs):
    if getBoxType() in ("xpeedlx1", "atemio6000", "atemio6100", "bwidowx",
                        "bwidowx2", "mbhybrid", "opticumtt"):
        return [
            PluginDescriptor(where=[
                PluginDescriptor.WHERE_AUTOSTART,
                PluginDescriptor.WHERE_SESSIONSTART
            ],
                             fnc=sessionstart),
            PluginDescriptor(name="INI LED Display Setup",
                             description="Change VFD display settings",
                             where=PluginDescriptor.WHERE_MENU,
                             fnc=main)
        ]
    else:
        return []
Ejemplo n.º 50
0
    def checkTraficLight(self):
        self.activityTimer.callback.remove(self.checkTraficLight)
        self.activityTimer.start(100, False)

        currentTimeoutDefault = socket.getdefaulttimeout()
        socket.setdefaulttimeout(3)
        message = ""
        picon = None
        try:
            # TODO: Use Twisted's URL fetcher, urlopen is evil. And it can
            # run in parallel to the package update.
            url = "https://openpli.org/status/"
            try:
                status = urlopen(url, timeout=5).read().split('!', 1)
            except:
                # OpenPli 5.0 uses python 2.7.11 and here we need to bypass the certificate check
                from ssl import _create_unverified_context
                status = urlopen(
                    url, timeout=5,
                    context=_create_unverified_context()).read().split('!', 1)
                print status
            if getBoxType() in status[0].split(','):
                message = len(status) > 1 and status[1] or _(
                    "The current image might not be stable.\nFor more information see %s."
                ) % ("www.nonsolosat.net")
                # strip any HTML that may be in the message, but retain line breaks
                import re
                message = message.replace("<br />",
                                          "\n\n").replace("<br>", "\n\n")
                message = re.sub('<[^<]+?>', '',
                                 re.sub('&#8209;', '-', message))
                picon = MessageBox.TYPE_ERROR
        except:
            message = _(
                "The status of the current image could not be checked because %s can not be reached."
            ) % ("www.nonsolosat.net")
            picon = MessageBox.TYPE_ERROR
        socket.setdefaulttimeout(currentTimeoutDefault)
        if message != "":
            message += "\n" + _("Do you want to update your receiver?")
            self.session.openWithCallback(self.startActualUpdate,
                                          MessageBox,
                                          message,
                                          picon=picon)
        else:
            self.startActualUpdate(True)
Ejemplo n.º 51
0
def getDriverInstalledDate():
    try:
        from glob import glob
        try:
            if getBoxType() in ("dm800", "dm8000"):
                print("[About] Read /var/lib/opkg/info/dvb-modules.control")
                driver = [
                    x.split("-")[-2:-1][0][-9:] for x in open(
                        glob("/var/lib/opkg/info/*dvb-modules*.control")[0],
                        "r") if x.startswith("Version:")
                ][0]
                return "%s-%s-%s" % (driver[:4], driver[4:6], driver[6:])
            else:
                print("[About] Read /var/lib/opkg/info/dvb-modules.control")
                driver = [
                    x.split("-")[-2:-1][0][-8:] for x in open(
                        glob("/var/lib/opkg/info/*dvb-modules*.control")[0],
                        "r") if x.startswith("Version:")
                ][0]
                return "%s-%s-%s" % (driver[:4], driver[4:6], driver[6:])
        except:
            print(
                "[About] Read /var/lib/opkg/info/dvb-modules.control failed.")
            try:
                print("[About] Read /var/lib/opkg/info/dvb-proxy.control")
                driver = [
                    x.split("Version:") for x in open(
                        glob("/var/lib/opkg/info/*dvb-proxy*.control")[0], "r")
                    if x.startswith("Version:")
                ][0]
                return "%s" % driver[1].replace("\n", "")
            except:
                print(
                    "[About] Read /var/lib/opkg/info/dvb-proxy.control failed."
                )
                print("[About] Read /var/lib/opkg/info/platform-util.control")
                driver = [
                    x.split("Version:") for x in open(
                        glob("/var/lib/opkg/info/*platform-util*.control")[0],
                        "r") if x.startswith("Version:")
                ][0]
                return "%s" % driver[1].replace("\n", "")
    except:
        print("[About] Read driver date failed.")
        return _("unknown")
Ejemplo n.º 52
0
 def keyOk(self):
     self.currentSelected = self["list"].l.getCurrentSelection()
     slot = self.currentSelected[0][1]
     if slot != "Waiter":
         if slot == "Recovery":
             shutil.copyfile("/tmp/startupmount/STARTUP_RECOVERY",
                             "/tmp/startupmount/STARTUP")
         elif slot == "Android":
             shutil.copyfile("/tmp/startupmount/STARTUP_ANDROID",
                             "/tmp/startupmount/STARTUP")
         else:
             model = getBoxType()
             if SystemInfo["canMultiBoot"][3]:
                 shutil.copyfile("/tmp/startupmount/STARTUP_%s" % slot,
                                 "/tmp/startupmount/STARTUP")
             elif os.path.isfile(
                     "/tmp/startupmount/STARTUP_LINUX_4_BOXMODE_12"):
                 if slot < 12:
                     shutil.copyfile(
                         "/tmp/startupmount/STARTUP_LINUX_%s_BOXMODE_1" %
                         slot, "/tmp/startupmount/STARTUP")
                 else:
                     slot -= 12
                     shutil.copyfile(
                         "/tmp/startupmount/STARTUP_LINUX_%s_BOXMODE_12" %
                         slot, "/tmp/startupmount/STARTUP")
             elif os.path.isfile("/tmp/startupmount/STARTUP_LINUX_4"):
                 shutil.copyfile(
                     "/tmp/startupmount/STARTUP_LINUX_%s" % slot,
                     "/tmp/startupmount/STARTUP")
             elif os.path.isfile("/tmp/startupmount/STARTUP_4"):
                 shutil.copyfile("/tmp/startupmount/STARTUP_%s" % slot,
                                 "/tmp/startupmount/STARTUP")
             else:
                 if slot < 12:
                     startupFileContents = "boot emmcflash0.kernel%s 'root=/dev/mmcblk0p%s rw rootwait %s_4.boxmode=1'\n" % (
                         slot, slot * 2 + 1, model)
                 else:
                     slot -= 12
                     startupFileContents = "boot emmcflash0.kernel%s 'brcm_cma=520M@248M brcm_cma=%s@768M root=/dev/mmcblk0p%s rw rootwait %s_4.boxmode=12'\n" % (
                         slot, SystemInfo["canMode12"], slot * 2 + 1, model)
                 open('/tmp/startupmount/STARTUP',
                      'w').write(startupFileContents)
         from Screens.Standby import TryQuitMainloop
         self.session.open(TryQuitMainloop, 2)
Ejemplo n.º 53
0
    def createInfo(self):

        uid = self.createUid()
        stb_model = getBoxType()
        firmware_version = os.popen("cat /etc/issue.net").read()

        #testing time bug, restore to
        #vas_installed = int(time.time())
        self.now = time.time()
        vas_installed = int(self.now)

        self.info["uid"] = str(uid)
        self.info["stb_model"] = stb_model
        self.info["firmware_version"] = firmware_version
        self.info["vas_installed"] = vas_installed
        self.info["vas_version"] = self.vas_version

        os.system("mkdir -p /home/vas/")
Ejemplo n.º 54
0
 def getLatestImageTimestamp(self):
     currentTimeoutDefault = socket.getdefaulttimeout()
     socket.setdefaulttimeout(3)
     latestImageTimestamp = ""
     try:
         # TODO: Use Twisted's URL fetcher, urlopen is evil. And it can
         # run in parallel to the package update.
         latestImageTimestamp = re.findall(
             '<dd>(.*?)</dd>',
             urlopen("http://sfteam.es/download/" + getBoxType() +
                     "/").read())[0][:16]
         latestImageTimestamp = time.strftime(
             _("%d-%b-%Y %-H:%M"),
             time.strptime(latestImageTimestamp, "%Y/%m/%d %H:%M"))
     except:
         pass
     socket.setdefaulttimeout(currentTimeoutDefault)
     return latestImageTimestamp
Ejemplo n.º 55
0
 def ContainterFallback(self, data=None, retval=None, extra_args=None):
     self.container.killAll()
     slot = self.currentSelected[0][1]
     model = getBoxType()
     if SystemInfo["canMultiBoot"][3]:
         shutil.copyfile("/tmp/startupmount/STARTUP_%s" % slot,
                         "/tmp/startupmount/STARTUP")
     else:
         if slot < 12:
             startupFileContents = "boot emmcflash0.kernel%s 'root=/dev/mmcblk0p%s rw rootwait %s_4.boxmode=1'\n" % (
                 slot, slot * 2 + 1, model)
         else:
             slot -= 12
             startupFileContents = "boot emmcflash0.kernel%s 'brcm_cma=520M@248M brcm_cma=%s@768M root=/dev/mmcblk0p%s rw rootwait %s_4.boxmode=12'\n" % (
                 slot, SystemInfo["canMode12"], slot * 2 + 1, model)
         open('/tmp/startupmount/STARTUP', 'w').write(startupFileContents)
     from Screens.Standby import TryQuitMainloop
     self.session.open(TryQuitMainloop, 2)
Ejemplo n.º 56
0
def getFPVersion():
	ret = "unknown"
	try:
		if getBoxBrand() == "blackbox" and fileExists("/proc/stb/info/micomver"):
			ret = open("/proc/stb/info/micomver", "r").read()
		elif fileExists("/proc/stb/fp/version"):
			if getMachineBuild() == "dm4kgen" or getBoxType() in ("dm520","dm7080","dm820"):
				ret = open("/proc/stb/fp/version", "r").read()
			else:
				ret = long(open("/proc/stb/fp/version", "r").read())
		elif fileExists("/sys/firmware/devicetree/base/bolt/tag"):
			ret = open("/sys/firmware/devicetree/base/bolt/tag", "r").read().rstrip("\0")
		else:
			fp = open("/dev/dbox/fp0")
			ret = ioctl(fp.fileno(),0)
	except IOError:
		print("[StbHardware] getFPVersion failed!")
	return ret
Ejemplo n.º 57
0
    def checkTraficLight(self):
        self.activityTimer.callback.remove(self.checkTraficLight)
        self.activityTimer.start(100, False)

        currentTimeoutDefault = socket.getdefaulttimeout()
        socket.setdefaulttimeout(3)
        message = ""
        picon = None
        default = True
        try:
            # TODO: Use Twisted's URL fetcher, urlopen is evil. And it can
            # run in parallel to the package update.
            url = "http://openpli.org/status/"
            try:
                status = urlopen(url, timeout=5).read().split('!', 1)
            except:
                # OpenPli 5.0 uses python 2.7.11 and here we need to bypass the certificate check
                from ssl import _create_unverified_context
                status = urlopen(
                    url, timeout=5,
                    context=_create_unverified_context()).read().split('!', 1)
                print status
            if getBoxType() in status[0].split(','):
                message = len(status) > 1 and status[1] or _(
                    "The current beta image might not be stable.\nFor more information see %s."
                ) % ("www.openpli.org")
                picon = MessageBox.TYPE_ERROR
                default = False
        except:
            message = _(
                "The status of the current beta image could not be checked because %s can not be reached."
            ) % ("www.openpli.org")
            picon = MessageBox.TYPE_ERROR
            default = False
        socket.setdefaulttimeout(currentTimeoutDefault)
        if default:
            self.showDisclaimer()
        else:
            message += "\n" + _("Do you want to update your receiver?")
            self.session.openWithCallback(self.startActualUpdate,
                                          MessageBox,
                                          message,
                                          default=default,
                                          picon=picon)
Ejemplo n.º 58
0
    def prerequisiteMet(self, prerequisites):
        met = True
        if self.neededTag is None:
            if "tag" in prerequisites:
                return False
        elif self.neededTag == 'ALL_TAGS':
            return True
        else:
            if "tag" in prerequisites:
                if not self.neededTag in prerequisites["tag"]:
                    return False
            else:
                return False

        if self.neededFlag is None:
            if "flag" in prerequisites:
                return False
        else:
            if "flag" in prerequisites:
                if not self.neededFlag in prerequisites["flag"]:
                    return False
            else:
                return True

        if "satellite" in prerequisites:
            for sat in prerequisites["satellite"]:
                if int(sat) not in nimmanager.getConfiguredSats():
                    return False
        if "bcastsystem" in prerequisites:
            has_system = False
            for bcastsystem in prerequisites["bcastsystem"]:
                if nimmanager.hasNimType(bcastsystem):
                    has_system = True
            if not has_system:
                return False
        if "hardware" in prerequisites:
            hardware_found = False
            for hardware in prerequisites["hardware"]:
                if hardware == getBoxType():
                    hardware_found = True
            if not hardware_found:
                return False
        return True
Ejemplo n.º 59
0
def getDriverInstalledDate():
	try:
		from glob import glob
		try:
			if getBoxType() in ("dm800","dm8000"):
				driver = [x.split("-")[-2:-1][0][-9:] for x in open(glob("/var/lib/opkg/info/*-dvb-modules-*.control")[0], "r") if x.startswith("Version:")][0]
				return  "%s-%s-%s" % (driver[:4], driver[4:6], driver[6:])
			else:
				driver = [x.split("-")[-2:-1][0][-8:] for x in open(glob("/var/lib/opkg/info/*-dvb-modules-*.control")[0], "r") if x.startswith("Version:")][0]
				return  "%s-%s-%s" % (driver[:4], driver[4:6], driver[6:])
		except:
			try:
				driver = [x.split("Version:") for x in open(glob("/var/lib/opkg/info/*-dvb-proxy-*.control")[0], "r") if x.startswith("Version:")][0]
				return  "%s" % driver[1].replace("\n","")
			except:
				driver = [x.split("Version:") for x in open(glob("/var/lib/opkg/info/*-platform-util-*.control")[0], "r") if x.startswith("Version:")][0]
				return  "%s" % driver[1].replace("\n","")
	except:
		return _("unknown")
Ejemplo n.º 60
0
 def openTest(self):
     ldeps = len(self.depends)
     if ldeps == 0:
         self.viewLog()
     else:
         name1 = self.depends[0]
         missing = name1 + "_"
         slist = 'cams eglibc firmware fonts gstreamer lib mips32el perl plugins python qt4 skins ' + str(
             getBoxType())
         source = slist.split()
         self.found = 0
         i = 0
         while i < 12:
             addn = source[i]
             ftxt = '/tmp/.' + addn + '.txt'
             if not fileExists(ftxt):
                 cmd1 = "wget -O /tmp/." + addn + ".txt 'https://openvision.tech/pedm/mipsel/" + addn + "/index.html'"
                 os.system(cmd1)
             f1 = file(ftxt)
             flist1 = f1.read()
             if missing in flist1:
                 self.addon = addn
                 n4 = flist1.find(missing, 0)
                 n5 = flist1.find(".ipk", n4)
                 self.ipk = flist1[n4:(n5 + 4)]
                 self.found = 1
                 break
             else:
                 i = i + 1
         if self.found == 0:
             txt = name1 + "\nNot Found On The Server !"
             self.session.open(MessageBox, txt, type=1)
             self.close
         else:
             xurl1 = 'https://openvision.tech/pedm/mipsel/' + self.addon + '/'
             xurl2 = xurl1 + self.ipk
             self.idx = self.idx + 1
             cmd2 = 'opkg install --force-reinstall --force-overwrite ' + xurl2 + ' > /tmp/.log' + str(
                 self.idx) + '.txt'
             title = _("Installing addons %s" % (self.ipk))
             self.session.openWithCallback(self.newdeps, Console, _(title),
                                           [cmd2])