def _onlySAPsRequest():
nffg = NFFG(id="BME-req-001")
sap1 = nffg.add_sap(name="SAP1", id="sap1")
sap2 = nffg.add_sap(name="SAP2", id="sap2")
nffg.add_sglink(sap1.add_port(0), sap2.add_port(0))
# nffg.add_sglink(sap1.add_port(1), sap2.add_port(1))
nffg.add_req(sap1.ports[0], sap2.ports[0], bandwidth=1000, delay=24)
nffg.add_req(sap1.ports[0], sap2.ports[0], bandwidth=1000, delay=24)
return nffg
def _example_request_for_fallback():
nffg = NFFG(id="FALLBACK-REQ", name="fallback-req")
sap1 = nffg.add_sap(name="SAP1", id="sap1")
sap2 = nffg.add_sap(name="SAP2", id="sap2")
# add NF requirements.
nf0 = nffg.add_nf(id="NF0",
name="NetFunc0",
func_type='B',
cpu=2,
mem=2,
storage=2,
bandwidth=100)
nf1 = nffg.add_nf(id="NF1",
name="NetFunc1",
func_type='A',
cpu=1.5,
mem=1.5,
storage=1.5,
delay=50)
nf2 = nffg.add_nf(id="NF2",
name="NetFunc2",
func_type='C',
cpu=3,
mem=3,
storage=3,
bandwidth=500)
nf3 = nffg.add_nf(id="NF3",
name="NetFunc3",
func_type='A',
cpu=2,
mem=2,
storage=2,
bandwidth=100,
delay=50)
# add SG hops
nffg.add_sglink(sap1.add_port(0), nf0.add_port(0), id="s1n0")
nffg.add_sglink(nf0.add_port(1), nf1.add_port(0), id="n0n1")
nffg.add_sglink(nf1.add_port(1), nf2.add_port(0), id="n1n2")
nffg.add_sglink(nf1.add_port(2), nf3.add_port(0), id="n1n3")
nffg.add_sglink(nf2.add_port(1), sap2.add_port(0), id="n2s2")
nffg.add_sglink(nf3.add_port(1), sap2.add_port(1), id="n3s2")
# add EdgeReqs
# port number on SAP2 doesn`t count
nffg.add_req(sap1.ports[0], sap2.ports[1], bandwidth=1000, delay=24)
nffg.add_req(nf0.ports[1], nf1.ports[0], bandwidth=200)
nffg.add_req(nf0.ports[1], nf1.ports[0], delay=3)
# set placement criteria. Should be used to enforce the placement decision of
# the upper orchestration layer. Placement criteria can contain multiple
# InfraNode id-s, if the BiS-BiS is decomposed to multiple InfraNodes in this
# layer.
# setattr(nf1, 'placement_criteria', ['nc2'])
return nffg
def _testRequestForBacktrack():
nffg = NFFG(id="backtracktest-req", name="btreq")
sap1 = nffg.add_sap(name="SAP1", id="sap1req")
sap2 = nffg.add_sap(name="SAP2", id="sap2req")
a = nffg.add_nf(id="a",
name="NetFunc0",
func_type='A',
cpu=3,
mem=3,
storage=3)
b = nffg.add_nf(id="b",
name="NetFunc1",
func_type='A',
cpu=3,
mem=3,
storage=3)
c = nffg.add_nf(id="c",
name="NetFunc2",
func_type='A',
cpu=3,
mem=3,
storage=3)
nffg.add_sglink(sap1.add_port(0), a.add_port(0), id="sa")
nffg.add_sglink(a.add_port(1), b.add_port(0), id="ab")
nffg.add_sglink(b.add_port(1), c.add_port(0), id="bc")
nffg.add_sglink(c.add_port(1), sap2.add_port(0), id="cs")
nffg.add_req(a.ports[0], b.ports[1], delay=1.0, sg_path=["ab"])
nffg.add_req(b.ports[0], c.ports[1], delay=1.0, sg_path=["bc"])
nffg.add_req(c.ports[0], sap2.ports[0], delay=1.0, sg_path=["cs"])
nffg.add_req(sap1.ports[0],
sap2.ports[0],
delay=50,
bandwidth=10,
sg_path=["sa", "ab", "bc", "cs"])
return nffg
def generateRequestForCarrierTopo(all_saps_ending,
all_saps_beginning,
avg_shp_len,
nf_types,
max_e2e_lat_multiplier=20,
min_e2e_lat_multiplier=1.1,
loops=False,
use_saps_once=True,
vnf_sharing_probabilty=0.0,
multiSC=False,
max_sc_count=2,
chain_maxlen=8,
max_cpu=4,
max_mem=1600,
max_storage=3,
max_bw=7):
"""
By default generates VNF-disjoint SC-s starting/ending only once in each SAP.
With the 'loops' option, only loop SC-s are generated.
'vnf_sharing_probabilty' determines the ratio of
#(VNF-s used by at least two SC-s)/#(not shared VNF-s).
"""
sc_count = 1
gen = NameGenerator()
# maximal possible bandwidth for chains
if multiSC:
sc_count = rnd.randint(2, max_sc_count)
while len(all_saps_ending) > sc_count and len(
all_saps_beginning) > sc_count:
nffg = NFFG(id="E2e_req_test_nffg")
nffg.mode = NFFG.MODE_ADD
# newly added NF-s of one request
current_nfs = []
for scid in xrange(0, sc_count):
# find two SAP-s for chain ends.
nfs_this_sc = []
sapid = all_saps_beginning.pop() if use_saps_once else \
rnd.choice(all_saps_beginning)
if sapid not in nffg:
sap1 = nffg.add_sap(id=sapid)
else:
sap1 = nffg.network.node[sapid]
sap2 = None
if loops:
sap2 = sap1
else:
tmpid = all_saps_ending.pop() if use_saps_once else \
rnd.choice(all_saps_ending)
while True:
if tmpid != sap1.id:
if tmpid not in nffg:
sap2 = nffg.add_sap(id=tmpid)
else:
sap2 = nffg.network.node[tmpid]
break
else:
tmpid = all_saps_ending.pop() if use_saps_once else \
rnd.choice(all_saps_ending)
sg_path = []
if len(sap1.ports) > 0:
for sap1port in sap1.ports:
break
else:
sap1port = sap1.add_port(id=gen.get_name("port"))
last_req_port = sap1port
# generate some VNF-s connecting the two SAP-s
vnf_cnt = next(gen_seq()) % chain_maxlen + 1
for vnf in xrange(0, vnf_cnt):
# in the first case p is used to determine which previous chain should
# be used to share the VNF, in the latter case it is used to determine
# whether we should share now.
p = rnd.random()
if multiSC and \
p < vnf_sharing_probabilty and len(current_nfs) > 0:
# this influences the the given VNF sharing probability...
if reduce(lambda a, b: a and b,
[v in nfs_this_sc for v in current_nfs]):
log.warn(
"All shareable VNF-s are already added to this chain! "
"Skipping VNF sharing...")
continue
else:
nf = rnd.choice(current_nfs)
while nf in nfs_this_sc:
nf = rnd.choice(current_nfs)
# the VNF is already in the subchain, we just need to add the
# links
# vnf_added = True
else:
nf = nffg.add_nf(id="-".join(
("SC", str(scid), "VNF", str(vnf))),
func_type=rnd.choice(nf_types),
cpu=rnd.random() * max_cpu,
mem=rnd.random() * max_mem,
storage=rnd.random() * max_storage)
nfs_this_sc.append(nf)
newport = nf.add_port(id=gen.get_name("port"))
sglink = nffg.add_sglink(last_req_port,
newport,
id=gen.get_name("link"))
sg_path.append(sglink.id)
last_req_port = nf.add_port(id=gen.get_name("port"))
if len(sap2.ports) > 0:
for sap2port in sap2.ports:
break
else:
sap2port = sap2.add_port(id=gen.get_name("port"))
sglink = nffg.add_sglink(last_req_port,
sap2port,
id=gen.get_name("link"))
sg_path.append(sglink.id)
# WARNING: this is completly a wild guess! Failing due to this doesn't
# necessarily mean algorithm failure
# Bandwidth maximal random value should be min(SAP1acces_bw,
# SAP2access_bw)
# MAYBE: each SAP can only be once in the reqgraph? - this is the case
# now.
minlat = avg_shp_len * min_e2e_lat_multiplier
maxlat = avg_shp_len * max_e2e_lat_multiplier
nffg.add_req(sap1port,
sap2port,
delay=rnd.uniform(minlat, maxlat),
bandwidth=rnd.random() * max_bw,
sg_path=sg_path,
id=gen.get_name("req"))
# log.debug(
# "Service Chain on NF-s added: %s" % [nf.id for nf in nfs_this_sc])
# this prevents loops in the chains and makes new and old NF-s equally
# preferable in total for NF sharing
new_nfs = [vnf for vnf in nfs_this_sc if vnf not in current_nfs]
for tmp in xrange(0, scid + 1):
current_nfs.extend(new_nfs)
if not multiSC:
return nffg
if multiSC:
return nffg
return None
def generateRequestForCarrierTopo(test_lvl,
all_saps_beginning,
all_saps_ending,
running_nfs,
loops=False,
use_saps_once=True,
vnf_sharing_probabilty=0.0,
vnf_sharing_same_sg=0.0,
shareable_sg_count=9999999999999999,
multiSC=False,
max_sc_count=2):
"""
By default generates VNF-disjoint SC-s starting/ending only once in each SAP.
With the 'loops' option, only loop SC-s are generated.
'vnf_sharing_probabilty' determines the ratio of
#(VNF-s used by at least two SC-s)/#(not shared VNF-s).
NOTE: some kind of periodicity is included to make the effect of batching
visible. But it is (and must be) independent of the batch_length.
WARNING!! batch_length meaining is changed if --poisson is set!
Generate exponential arrival time for VNF-s to make Batching more reasonable.
inter arrival time is Exp(1) so if we are batching for 4 time units, the
expected SG count is 4, because the sum of 4 Exp(1) is Exp(4).
BUT we wait for 1 SG at least, but if by that time 4 units has already passed,
map the SG alone (unbatched).
"""
chain_maxlen = 8
sc_count = 1
# maximal possible bandwidth for chains
max_bw = 7.0
if multiSC:
sc_count = random.randint(2, max_sc_count)
while len(all_saps_ending) > sc_count and len(
all_saps_beginning) > sc_count:
nffg = NFFG(id="Benchmark-Req-" + str(test_lvl) + "-Piece")
# newly added NF-s of one request
current_nfs = []
for scid in xrange(0, sc_count):
# find two SAP-s for chain ends.
nfs_this_sc = []
sap1 = nffg.add_sap(id = all_saps_beginning.pop() if use_saps_once else \
random.choice(all_saps_beginning))
sap2 = None
if loops:
sap2 = sap1
else:
tmpid = all_saps_ending.pop() if use_saps_once else \
random.choice(all_saps_ending)
while True:
if tmpid != sap1.id:
sap2 = nffg.add_sap(id=tmpid)
break
else:
tmpid = all_saps_ending.pop() if use_saps_once else \
random.choice(all_saps_ending)
sg_path = []
sap1port = sap1.add_port()
last_req_port = sap1port
# generate some VNF-s connecting the two SAP-s
vnf_cnt = next(gen_seq()) % chain_maxlen + 1
for vnf in xrange(0, vnf_cnt):
# in the first case p is used to determine which previous chain should
# be used to share the VNF, in the latter case it is used to determine
# whether we should share now.
vnf_added = False
p = random.random()
if random.random() < vnf_sharing_probabilty and len(running_nfs) > 0 \
and not multiSC:
vnf_added, nf = _shareVNFFromEarlierSG(
nffg, running_nfs, nfs_this_sc, p)
elif multiSC and \
p < vnf_sharing_probabilty and len(current_nfs) > 0 \
and len(running_nfs) > 0:
# this influences the the given VNF sharing probability...
if reduce(lambda a, b: a and b,
[v in nfs_this_sc for v in current_nfs]):
log.warn(
"All shareable VNF-s are already added to this chain! "
"Skipping VNF sharing...")
elif random.random() < vnf_sharing_same_sg:
nf = random.choice(current_nfs)
while nf in nfs_this_sc:
nf = random.choice(current_nfs)
# the VNF is already in the subchain, we just need to add the links
# vnf_added = True
else:
# this happens when VNF sharing is needed but not with the actual SG
vnf_added, nf = _shareVNFFromEarlierSG(
nffg, running_nfs, nfs_this_sc, p)
else:
nf = nffg.add_nf(id="-".join(("Test",str(test_lvl),"SC",str(scid),
"VNF",str(vnf))),
func_type=random.choice(['A','B','C']),
cpu=random.randint(1 + (2 if test_lvl%4 == 3 else 0),
4 + (6 if test_lvl%4 == 3 else 0)),
mem=random.random()*1000 + \
(1000 if test_lvl%4 > 1 else 0),
storage=random.random()*3 + \
(6 if test_lvl%4 > 1 else 0),
delay=1 + random.random()*10,
bandwidth=random.random())
vnf_added = True
if vnf_added:
# add olny the newly added VNF-s, not the shared ones.
nfs_this_sc.append(nf)
newport = nf.add_port()
sglink = nffg.add_sglink(last_req_port, newport)
sg_path.append(sglink.id)
last_req_port = nf.add_port()
sap2port = sap2.add_port()
sglink = nffg.add_sglink(last_req_port, sap2port)
sg_path.append(sglink.id)
# WARNING: this is completly a wild guess! Failing due to this doesn't
# necessarily mean algorithm failure
# Bandwidth maximal random value should be min(SAP1acces_bw, SAP2access_bw)
# MAYBE: each SAP can only be once in the reqgraph? - this is the case now.
if multiSC:
minlat = 5.0 * (len(nfs_this_sc) + 2)
maxlat = 13.0 * (len(nfs_this_sc) + 2)
else:
# nfcnt = len([i for i in nffg.nfs])
minlat = 45.0 - 10.0 * (test_lvl % 4)
maxlat = 60.0 - 12.25 * (test_lvl % 4)
nffg.add_req(sap1port,
sap2port,
delay=random.uniform(minlat, maxlat),
bandwidth=random.random() * (max_bw + test_lvl % 4),
sg_path=sg_path)
log.info("Service Chain on NF-s added: %s" %
[nf.id for nf in nfs_this_sc])
# this prevents loops in the chains and makes new and old NF-s equally
# preferable in total for NF sharing
new_nfs = [vnf for vnf in nfs_this_sc if vnf not in current_nfs]
for tmp in xrange(0, scid + 1):
current_nfs.extend(new_nfs)
if not multiSC:
return nffg, all_saps_beginning, all_saps_ending
if multiSC:
return nffg, all_saps_beginning, all_saps_ending
return None, all_saps_beginning, all_saps_ending
def _constructExampleRequest():
nffg = NFFG(id="BME-req-001")
sap0 = nffg.add_sap(name="SAP0", id="sap0")
sap1 = nffg.add_sap(name="SAP1", id="sap1")
# add NF requirements.
# Note: storage is used now for the first time, it comes in with the
# NodeResource class
# Note: internal latency is only forwarded to lower layer
# Note: internal bw is untested yet, even before the NFFG support
nf0 = nffg.add_nf(id="NF0",
name="NetFunc0",
func_type='A',
cpu=2,
mem=2,
storage=2,
bandwidth=100)
nf1 = nffg.add_nf(id="NF1",
name="NetFunc1",
func_type='B',
cpu=1.5,
mem=1.5,
storage=1.5,
delay=50)
nf2 = nffg.add_nf(id="NF2",
name="NetFunc2",
func_type='C',
cpu=3,
mem=3,
storage=3,
bandwidth=500)
nf3 = nffg.add_nf(id="NF3",
name="NetFunc3",
func_type='A',
cpu=2,
mem=2,
storage=2,
bandwidth=100,
delay=50)
nf4 = nffg.add_nf(id="NF4",
name="NetFunc4",
func_type='C',
cpu=0,
mem=0,
storage=0,
bandwidth=500)
# directed SG links
# flowclass default: None, meaning: match all traffic
# some agreement on flowclass format is required.
nffg.add_sglink(sap0.add_port(0), nf0.add_port(0))
nffg.add_sglink(nf0.add_port(1), nf1.add_port(0), flowclass="HTTP")
nffg.add_sglink(nf1.add_port(1), nf2.add_port(0), flowclass="HTTP")
nffg.add_sglink(nf2.add_port(1), sap1.add_port(1))
nffg.add_sglink(nf0.add_port(2), nf3.add_port(0), flowclass="non-HTTP")
nffg.add_sglink(nf3.add_port(1), nf2.add_port(2), flowclass="non-HTTP")
nffg.add_sglink(nf1.add_port(2), nf4.add_port(0), flowclass="index.com")
nffg.add_sglink(nf4.add_port(1), nf2.add_port(3), flowclass="index.com")
# add EdgeReqs
nffg.add_req(sap0.ports[0], sap1.ports[1], delay=40, bandwidth=1500)
nffg.add_req(nf1.ports[1], nf2.ports[0], delay=3.5)
nffg.add_req(nf3.ports[1], nf2.ports[2], bandwidth=500)
nffg.add_req(sap0.ports[0], nf0.ports[0], delay=3.0)
# force collocation of NF0 and NF3
# nffg.add_req(nf0.ports[2], nf3.ports[0], delay=1.0)
# not SAP-to-SAP requests are not taken into account yet, these are ignored
nffg.add_req(nf0.ports[1], nf2.ports[0], delay=1.0)
# test Infra node removal from the request NFFG
infra1 = nffg.add_infra(id="BiS-BiS1")
infra2 = nffg.add_infra(id="BiS-BiS2")
nffg.add_undirected_link(infra1.add_port(0), nf0.add_port(3), dynamic=True)
nffg.add_undirected_link(infra1.add_port(1), nf0.add_port(4), dynamic=True)
nffg.add_undirected_link(infra1.add_port(2), nf1.add_port(3), dynamic=True)
nffg.add_undirected_link(infra2.add_port(0), nf2.add_port(4), dynamic=True)
nffg.add_undirected_link(infra2.add_port(1), nf3.add_port(2), dynamic=True)
nffg.add_undirected_link(infra1.add_port(3),
infra2.add_port(2),
bandwidth=31241242)
return nffg
