def to_code(config):
for clk in gpio_output_pin_expression(config[CONF_CLK_PIN]):
yield
rhs = App.init_spi(clk)
spi = Pvariable(config[CONF_ID], rhs)
if CONF_MISO_PIN in config:
for miso in gpio_input_pin_expression(config[CONF_MISO_PIN]):
yield
add(spi.set_miso(miso))
if CONF_MOSI_PIN in config:
for mosi in gpio_input_pin_expression(config[CONF_MOSI_PIN]):
yield
add(spi.set_mosi(mosi))
setup_component(spi, config)
def to_code(config):
for dout_pin in gpio_input_pin_expression(config[CONF_DOUT_PIN]):
yield
for sck_pin in gpio_input_pin_expression(config[CONF_CLK_PIN]):
yield
rhs = App.make_hx711_sensor(config[CONF_NAME], dout_pin, sck_pin,
config.get(CONF_UPDATE_INTERVAL))
hx711 = Pvariable(config[CONF_ID], rhs)
if CONF_GAIN in config:
add(hx711.set_gain(GAINS[config[CONF_GAIN]]))
sensor.setup_sensor(hx711, config)
setup_component(hx711, config)
def to_code(config):
rhs = App.make_deep_sleep_component()
deep_sleep = Pvariable(config[CONF_ID], rhs)
if CONF_SLEEP_DURATION in config:
add(deep_sleep.set_sleep_duration(config[CONF_SLEEP_DURATION]))
if CONF_WAKEUP_PIN in config:
for pin in gpio_input_pin_expression(config[CONF_WAKEUP_PIN]):
yield
add(deep_sleep.set_wakeup_pin(pin))
if CONF_WAKEUP_PIN_MODE in config:
add(
deep_sleep.set_wakeup_pin_mode(
WAKEUP_PIN_MODES[config[CONF_WAKEUP_PIN_MODE]]))
if CONF_RUN_DURATION in config:
add(deep_sleep.set_run_duration(config[CONF_RUN_DURATION]))
if CONF_ESP32_EXT1_WAKEUP in config:
conf = config[CONF_ESP32_EXT1_WAKEUP]
mask = 0
for pin in conf[CONF_PINS]:
mask |= 1 << pin[CONF_NUMBER]
struct = StructInitializer(
Ext1Wakeup, ('mask', mask),
('wakeup_mode', EXT1_WAKEUP_MODES[conf[CONF_MODE]]))
add(deep_sleep.set_ext1_wakeup(struct))
setup_component(deep_sleep, config)
def to_code(config):
pin = None
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_binary_sensor(config[CONF_NAME], pin)
gpio = Pvariable(config[CONF_ID], rhs)
binary_sensor.setup_binary_sensor(gpio, config)
setup_component(gpio, config)
def to_code(config):
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_duty_cycle_sensor(config[CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
duty = Pvariable(config[CONF_ID], rhs)
sensor.setup_sensor(duty, config)
setup_component(duty, config)
def to_code(config):
for pin_a in gpio_input_pin_expression(config[CONF_PIN_A]):
yield
for pin_b in gpio_input_pin_expression(config[CONF_PIN_B]):
yield
rhs = App.make_rotary_encoder_sensor(config[CONF_NAME], pin_a, pin_b)
encoder = Pvariable(config[CONF_ID], rhs)
if CONF_PIN_RESET in config:
for pin_i in gpio_input_pin_expression(config[CONF_PIN_RESET]):
yield
add(encoder.set_reset_pin(pin_i))
if CONF_RESOLUTION in config:
resolution = RESOLUTIONS[config[CONF_RESOLUTION]]
add(encoder.set_resolution(resolution))
sensor.setup_sensor(encoder, config)
setup_component(encoder, config)
def to_code(config):
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_pulse_counter_sensor(config[CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
pcnt = Pvariable(config[CONF_ID], rhs)
if CONF_COUNT_MODE in config:
rising_edge = COUNT_MODES[config[CONF_COUNT_MODE][CONF_RISING_EDGE]]
falling_edge = COUNT_MODES[config[CONF_COUNT_MODE][CONF_FALLING_EDGE]]
add(pcnt.set_edge_mode(rising_edge, falling_edge))
if CONF_INTERNAL_FILTER in config:
add(pcnt.set_filter_us(config[CONF_INTERNAL_FILTER]))
sensor.setup_sensor(pcnt, config)
setup_component(pcnt, config)
def to_code(config):
for trigger in gpio_output_pin_expression(config[CONF_TRIGGER_PIN]):
yield
for echo in gpio_input_pin_expression(config[CONF_ECHO_PIN]):
yield
rhs = App.make_ultrasonic_sensor(config[CONF_NAME], trigger, echo,
config.get(CONF_UPDATE_INTERVAL))
ultrasonic = Pvariable(config[CONF_ID], rhs)
if CONF_TIMEOUT_TIME in config:
add(ultrasonic.set_timeout_us(config[CONF_TIMEOUT_TIME]))
elif CONF_TIMEOUT_METER in config:
add(ultrasonic.set_timeout_m(config[CONF_TIMEOUT_METER]))
sensor.setup_sensor(ultrasonic, config)
setup_component(ultrasonic, config)
def to_code(config):
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_remote_receiver_component(pin)
receiver = Pvariable(config[CONF_ID], rhs)
for dumper in config[CONF_DUMP]:
add(receiver.add_dumper(DUMPERS[dumper].new()))
if CONF_TOLERANCE in config:
add(receiver.set_tolerance(config[CONF_TOLERANCE]))
if CONF_BUFFER_SIZE in config:
add(receiver.set_buffer_size(config[CONF_BUFFER_SIZE]))
if CONF_FILTER in config:
add(receiver.set_filter_us(config[CONF_FILTER]))
if CONF_IDLE in config:
add(receiver.set_idle_us(config[CONF_IDLE]))
setup_component(receiver, config)
def to_code(config):
for spi_ in get_variable(config[CONF_SPI_ID]):
yield
for cs in gpio_output_pin_expression(config[CONF_CS_PIN]):
yield
for dc in gpio_output_pin_expression(config[CONF_DC_PIN]):
yield
model_type, model = MODELS[config[CONF_MODEL]]
if model_type == 'a':
rhs = App.make_waveshare_epaper_type_a(spi_, cs, dc, model)
epaper = Pvariable(config[CONF_ID], rhs, type=WaveshareEPaperTypeA)
elif model_type == 'b':
rhs = App.make_waveshare_epaper_type_b(spi_, cs, dc, model)
epaper = Pvariable(config[CONF_ID], rhs, type=WaveshareEPaper)
else:
raise NotImplementedError()
if CONF_LAMBDA in config:
for lambda_ in process_lambda(config[CONF_LAMBDA],
[(display.DisplayBufferRef, 'it')],
return_type=void):
yield
add(epaper.set_writer(lambda_))
if CONF_RESET_PIN in config:
for reset in gpio_output_pin_expression(config[CONF_RESET_PIN]):
yield
add(epaper.set_reset_pin(reset))
if CONF_BUSY_PIN in config:
for reset in gpio_input_pin_expression(config[CONF_BUSY_PIN]):
yield
add(epaper.set_busy_pin(reset))
if CONF_FULL_UPDATE_EVERY in config:
add(epaper.set_full_update_every(config[CONF_FULL_UPDATE_EVERY]))
display.setup_display(epaper, config)
setup_component(epaper, config)
