class AccountDB(BaseAccountDB):
logger = cast(ExtendedDebugLogger,
logging.getLogger('eth.db.account.AccountDB'))
def __init__(self,
db: BaseDB,
state_root: Hash32 = BLANK_ROOT_HASH) -> None:
r"""
Internal implementation details (subject to rapid change):
Database entries go through several pipes, like so...
.. code::
-> hash-trie -> storage lookups
/
db > _batchdb ---------------------------> _journaldb ----------------> code lookups
\
-> _batchtrie -> _trie -> _trie_cache -> _journaltrie --------------> account lookups
Journaling sequesters writes at the _journal* attrs ^, until persist is called.
_batchtrie enables us to prune all trie changes while building
state, without deleting old trie roots.
_batchdb and _batchtrie together enable us to make the state root,
without saving everything to the database.
_journaldb is a journaling of the keys and values used to store
code and account storage.
_trie is a hash-trie, used to generate the state root
_trie_cache is a cache tied to the state root of the trie. It
is important that this cache is checked *after* looking for
the key in _journaltrie, because the cache is only invalidated
after a state root change.
_journaltrie is a journaling of the accounts (an address->rlp mapping,
rather than the nodes stored by the trie). This enables
a squashing of all account changes before pushing them into the trie.
.. NOTE:: There is an opportunity to do something similar for storage
AccountDB synchronizes the snapshot/revert/persist of both of the
journals.
"""
self._batchdb = BatchDB(db)
self._batchtrie = BatchDB(db)
self._journaldb = JournalDB(self._batchdb)
self._trie = HashTrie(
HexaryTrie(self._batchtrie, state_root, prune=True))
self._trie_cache = CacheDB(self._trie)
self._journaltrie = JournalDB(self._trie_cache)
self._account_cache = LRU(2048)
@property
def state_root(self) -> Hash32:
return self._trie.root_hash
@state_root.setter
def state_root(self, value: Hash32) -> None:
self._trie_cache.reset_cache()
self._trie.root_hash = value
def has_root(self, state_root: bytes) -> bool:
return state_root in self._batchtrie
#
# Storage
#
def get_storage(self,
address: Address,
slot: int,
from_journal: bool = True) -> int:
validate_canonical_address(address, title="Storage Address")
validate_uint256(slot, title="Storage Slot")
account = self._get_account(address, from_journal)
storage = HashTrie(HexaryTrie(self._journaldb, account.storage_root))
slot_as_key = pad32(int_to_big_endian(slot))
if slot_as_key in storage:
encoded_value = storage[slot_as_key]
return rlp.decode(encoded_value, sedes=rlp.sedes.big_endian_int)
else:
return 0
def set_storage(self, address: Address, slot: int, value: int) -> None:
validate_uint256(value, title="Storage Value")
validate_uint256(slot, title="Storage Slot")
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
storage = HashTrie(HexaryTrie(self._journaldb, account.storage_root))
slot_as_key = pad32(int_to_big_endian(slot))
if value:
encoded_value = rlp.encode(value)
storage[slot_as_key] = encoded_value
else:
del storage[slot_as_key]
self._set_account(address,
account.copy(storage_root=storage.root_hash))
def delete_storage(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account.copy(storage_root=BLANK_ROOT_HASH))
#
# Balance
#
def get_balance(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.balance
def set_balance(self, address: Address, balance: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(balance, title="Account Balance")
account = self._get_account(address)
self._set_account(address, account.copy(balance=balance))
#
# Nonce
#
def get_nonce(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.nonce
def set_nonce(self, address: Address, nonce: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(nonce, title="Nonce")
account = self._get_account(address)
self._set_account(address, account.copy(nonce=nonce))
def increment_nonce(self, address: Address) -> None:
current_nonce = self.get_nonce(address)
self.set_nonce(address, current_nonce + 1)
#
# Code
#
def get_code(self, address: Address) -> bytes:
validate_canonical_address(address, title="Storage Address")
try:
return self._journaldb[self.get_code_hash(address)]
except KeyError:
return b""
def set_code(self, address: Address, code: bytes) -> None:
validate_canonical_address(address, title="Storage Address")
validate_is_bytes(code, title="Code")
account = self._get_account(address)
code_hash = keccak(code)
self._journaldb[code_hash] = code
self._set_account(address, account.copy(code_hash=code_hash))
def get_code_hash(self, address: Address) -> Hash32:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.code_hash
def delete_code(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account.copy(code_hash=EMPTY_SHA3))
#
# Account Methods
#
def account_has_code_or_nonce(self, address: Address) -> bool:
return self.get_nonce(address) != 0 or self.get_code_hash(
address) != EMPTY_SHA3
def delete_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
if address in self._account_cache:
del self._account_cache[address]
del self._journaltrie[address]
def account_exists(self, address: Address) -> bool:
validate_canonical_address(address, title="Storage Address")
return self._journaltrie.get(address, b'') != b''
def touch_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account)
def account_is_empty(self, address: Address) -> bool:
return not self.account_has_code_or_nonce(
address) and self.get_balance(address) == 0
#
# Internal
#
def _get_account(self,
address: Address,
from_journal: bool = True) -> Account:
if from_journal and address in self._account_cache:
return self._account_cache[address]
rlp_account = (self._journaltrie if from_journal else
self._trie_cache).get(address, b'')
if rlp_account:
account = rlp.decode(rlp_account, sedes=Account)
else:
account = Account()
if from_journal:
self._account_cache[address] = account
return account
def _set_account(self, address: Address, account: Account) -> None:
self._account_cache[address] = account
rlp_account = rlp.encode(account, sedes=Account)
self._journaltrie[address] = rlp_account
#
# Record and discard API
#
def record(self) -> Tuple[UUID, UUID]:
return (self._journaldb.record(), self._journaltrie.record())
def discard(self, changeset: Tuple[UUID, UUID]) -> None:
db_changeset, trie_changeset = changeset
self._journaldb.discard(db_changeset)
self._journaltrie.discard(trie_changeset)
self._account_cache.clear()
def commit(self, changeset: Tuple[UUID, UUID]) -> None:
db_changeset, trie_changeset = changeset
self._journaldb.commit(db_changeset)
self._journaltrie.commit(trie_changeset)
def make_state_root(self) -> Hash32:
self.logger.debug2("Generating AccountDB trie")
self._journaldb.persist()
self._journaltrie.persist()
return self.state_root
def persist(self) -> None:
self.make_state_root()
self._batchtrie.commit(apply_deletes=False)
self._batchdb.commit(apply_deletes=True)
def _log_pending_accounts(self) -> None:
accounts_displayed = set() # type: Set[bytes]
queued_changes = self._journaltrie.journal.journal_data.items()
# mypy bug for ordered dict reversibility: https://github.com/python/typeshed/issues/2078
for _, accounts in reversed(queued_changes):
for address in accounts:
if address in accounts_displayed:
continue
else:
accounts_displayed.add(address)
account = self._get_account(Address(address))
self.logger.debug2(
"Account %s: balance %d, nonce %d, storage root %s, code hash %s",
encode_hex(address),
account.balance,
account.nonce,
encode_hex(account.storage_root),
encode_hex(account.code_hash),
)
class AccountStorageDB(AccountStorageDatabaseAPI):
logger = get_extended_debug_logger("eth.db.storage.AccountStorageDB")
def __init__(self, db: AtomicDatabaseAPI, storage_root: Hash32,
address: Address) -> None:
"""
Database entries go through several pipes, like so...
.. code::
db -> _storage_lookup -> _storage_cache -> _locked_changes -> _journal_storage
db is the raw database, we can assume it hits disk when written to.
Keys are stored as node hashes and rlp-encoded node values.
_storage_lookup is itself a pair of databases: (BatchDB -> HexaryTrie),
writes to storage lookup *are* immeditaely applied to a trie, generating
the appropriate trie nodes and and root hash (via the HexaryTrie). The
writes are *not* persisted to db, until _storage_lookup is explicitly instructed to,
via :meth:`StorageLookup.commit_to`
_storage_cache is a cache tied to the state root of the trie. It
is important that this cache is checked *after* looking for
the key in _journal_storage, because the cache is only invalidated
after a state root change. Otherwise, you will see data since the last
storage root was calculated.
_locked_changes is a batch database that includes only those values that are
un-revertable in the EVM. Currently, that means changes that completed in a
previous transaction.
Journaling batches writes at the _journal_storage layer, until persist is called.
It manages all the checkpointing and rollbacks that happen during EVM execution.
In both _storage_cache and _journal_storage, Keys are set/retrieved as the
big_endian encoding of the slot integer, and the rlp-encoded value.
"""
self._address = address
self._storage_lookup = StorageLookup(db, storage_root, address)
self._storage_cache = CacheDB(self._storage_lookup)
self._locked_changes = JournalDB(self._storage_cache)
self._journal_storage = JournalDB(self._locked_changes)
# Track how many times we have cleared the storage. This is journaled
# in lockstep with other storage changes. That way, we can detect if a revert
# causes use to revert past the previous storage deletion. The clear count is used
# as an index to find the base trie from before the revert.
self._clear_count = JournalDB(
MemoryDB({CLEAR_COUNT_KEY_NAME: to_bytes(0)}))
def get(self, slot: int, from_journal: bool = True) -> int:
key = int_to_big_endian(slot)
lookup_db = self._journal_storage if from_journal else self._locked_changes
try:
encoded_value = lookup_db[key]
except MissingStorageTrieNode:
raise
except KeyError:
return 0
if encoded_value == b'':
return 0
else:
return rlp.decode(encoded_value, sedes=rlp.sedes.big_endian_int)
def set(self, slot: int, value: int) -> None:
key = int_to_big_endian(slot)
if value:
self._journal_storage[key] = rlp.encode(value)
else:
try:
current_val = self._journal_storage[key]
except KeyError:
# deleting an empty key has no effect
return
else:
if current_val != b'':
# only try to delete the value if it's present
del self._journal_storage[key]
def delete(self) -> None:
self.logger.debug2(
"Deleting all storage in account 0x%s",
self._address.hex(),
)
self._journal_storage.clear()
self._storage_cache.reset_cache()
# Empty out the storage lookup trie (keeping history, in case of a revert)
new_clear_count = self._storage_lookup.new_trie()
# Look up the previous count of how many times the account has been deleted.
# This can happen multiple times in one block, via CREATE2.
old_clear_count = to_int(self._clear_count[CLEAR_COUNT_KEY_NAME])
# Gut check that we have incremented correctly
if new_clear_count != old_clear_count + 1:
raise ValidationError(
f"Must increase clear count by one on each delete. Instead, went from"
f" {old_clear_count} -> {new_clear_count} in account 0x{self._address.hex()}"
)
# Save the new count, ie~ the index used for a future revert.
self._clear_count[CLEAR_COUNT_KEY_NAME] = to_bytes(new_clear_count)
def record(self, checkpoint: JournalDBCheckpoint) -> None:
self._journal_storage.record(checkpoint)
self._clear_count.record(checkpoint)
def discard(self, checkpoint: JournalDBCheckpoint) -> None:
self.logger.debug2('discard checkpoint %r', checkpoint)
latest_clear_count = to_int(self._clear_count[CLEAR_COUNT_KEY_NAME])
if self._journal_storage.has_checkpoint(checkpoint):
self._journal_storage.discard(checkpoint)
self._clear_count.discard(checkpoint)
else:
# if the checkpoint comes before this account started tracking,
# then simply reset to the beginning
self._journal_storage.reset()
self._clear_count.reset()
self._storage_cache.reset_cache()
reverted_clear_count = to_int(self._clear_count[CLEAR_COUNT_KEY_NAME])
if reverted_clear_count == latest_clear_count - 1:
# This revert rewinds past a trie deletion, so roll back to the trie at
# that point. We use the clear count as an index to get back to the
# old base trie.
self._storage_lookup.rollback_trie(reverted_clear_count)
elif reverted_clear_count == latest_clear_count:
# No change in the base trie, take no action
pass
else:
# Although CREATE2 permits multiple creates and deletes in a single block,
# you can still only revert across a single delete. That's because delete
# is only triggered at the end of the transaction.
raise ValidationError(
f"This revert has changed the clear count in an invalid way, from"
f" {latest_clear_count} to {reverted_clear_count}, in 0x{self._address.hex()}"
)
def commit(self, checkpoint: JournalDBCheckpoint) -> None:
if self._journal_storage.has_checkpoint(checkpoint):
self._journal_storage.commit(checkpoint)
self._clear_count.commit(checkpoint)
else:
# if the checkpoint comes before this account started tracking,
# then flatten all changes, without persisting
self._journal_storage.flatten()
self._clear_count.flatten()
def lock_changes(self) -> None:
if self._journal_storage.has_clear():
self._locked_changes.clear()
self._journal_storage.persist()
def make_storage_root(self) -> None:
self.lock_changes()
self._locked_changes.persist()
def _validate_flushed(self) -> None:
"""
Will raise an exception if there are some changes made since the last persist.
"""
journal_diff = self._journal_storage.diff()
if len(journal_diff) > 0:
raise ValidationError(
f"StorageDB had a dirty journal when it needed to be clean: {journal_diff!r}"
)
@property
def has_changed_root(self) -> bool:
return self._storage_lookup.has_changed_root
def get_changed_root(self) -> Hash32:
return self._storage_lookup.get_changed_root()
def persist(self, db: DatabaseAPI) -> None:
self._validate_flushed()
if self._storage_lookup.has_changed_root:
self._storage_lookup.commit_to(db)
class AccountDB(BaseAccountDB):
logger = cast(ExtendedDebugLogger,
logging.getLogger('eth.db.account.AccountDB'))
def __init__(self,
db: BaseAtomicDB,
state_root: Hash32 = BLANK_ROOT_HASH) -> None:
r"""
Internal implementation details (subject to rapid change):
Database entries go through several pipes, like so...
.. code::
db > _batchdb ---------------------------> _journaldb ----------------> code lookups
\
-> _batchtrie -> _trie -> _trie_cache -> _journaltrie --------------> account lookups
Journaling sequesters writes at the _journal* attrs ^, until persist is called.
_batchtrie enables us to prune all trie changes while building
state, without deleting old trie roots.
_batchdb and _batchtrie together enable us to make the state root,
without saving everything to the database.
_journaldb is a journaling of the keys and values used to store
code and account storage.
_trie is a hash-trie, used to generate the state root
_trie_cache is a cache tied to the state root of the trie. It
is important that this cache is checked *after* looking for
the key in _journaltrie, because the cache is only invalidated
after a state root change.
_journaltrie is a journaling of the accounts (an address->rlp mapping,
rather than the nodes stored by the trie). This enables
a squashing of all account changes before pushing them into the trie.
.. NOTE:: StorageDB works similarly
AccountDB synchronizes the snapshot/revert/persist of both of the
journals.
"""
self._raw_store_db = db
self._batchdb = BatchDB(db)
self._batchtrie = BatchDB(db, read_through_deletes=True)
self._journaldb = JournalDB(self._batchdb)
self._trie = HashTrie(
HexaryTrie(self._batchtrie, state_root, prune=True))
self._trie_cache = CacheDB(self._trie)
self._journaltrie = JournalDB(self._trie_cache)
self._account_cache = LRU(2048)
self._account_stores = {} # type: Dict[Address, AccountStorageDB]
self._dirty_accounts = set() # type: Set[Address]
self._root_hash_at_last_persist = state_root
@property
def state_root(self) -> Hash32:
return self._trie.root_hash
@state_root.setter
def state_root(self, value: Hash32) -> None:
if self._trie.root_hash != value:
self._trie_cache.reset_cache()
self._trie.root_hash = value
def has_root(self, state_root: bytes) -> bool:
return state_root in self._batchtrie
#
# Storage
#
def get_storage(self,
address: Address,
slot: int,
from_journal: bool = True) -> int:
validate_canonical_address(address, title="Storage Address")
validate_uint256(slot, title="Storage Slot")
account_store = self._get_address_store(address)
return account_store.get(slot, from_journal)
def set_storage(self, address: Address, slot: int, value: int) -> None:
validate_uint256(value, title="Storage Value")
validate_uint256(slot, title="Storage Slot")
validate_canonical_address(address, title="Storage Address")
account_store = self._get_address_store(address)
self._dirty_accounts.add(address)
account_store.set(slot, value)
def delete_storage(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
self._set_storage_root(address, BLANK_ROOT_HASH)
self._wipe_storage(address)
def _wipe_storage(self, address: Address) -> None:
"""
Wipe out the storage, without explicitly handling the storage root update
"""
account_store = self._get_address_store(address)
self._dirty_accounts.add(address)
account_store.delete()
def _get_address_store(self, address: Address) -> AccountStorageDB:
if address in self._account_stores:
store = self._account_stores[address]
else:
storage_root = self._get_storage_root(address)
store = AccountStorageDB(self._raw_store_db, storage_root, address)
self._account_stores[address] = store
return store
def _dirty_account_stores(
self) -> Iterable[Tuple[Address, AccountStorageDB]]:
for address in self._dirty_accounts:
store = self._account_stores[address]
yield address, store
@to_tuple
def _get_changed_roots(self) -> Iterable[Tuple[Address, Hash32]]:
# list all the accounts that were changed, and their new storage roots
for address, store in self._dirty_account_stores():
if store.has_changed_root:
yield address, store.get_changed_root()
def _get_storage_root(self, address: Address) -> Hash32:
account = self._get_account(address)
return account.storage_root
def _set_storage_root(self, address: Address,
new_storage_root: Hash32) -> None:
account = self._get_account(address)
self._set_account(address, account.copy(storage_root=new_storage_root))
def _validate_flushed_storage(self, address: Address,
store: AccountStorageDB) -> None:
if store.has_changed_root:
actual_storage_root = self._get_storage_root(address)
expected_storage_root = store.get_changed_root()
if expected_storage_root != actual_storage_root:
raise ValidationError(
"Storage root was not saved to account before trying to persist roots. "
"Account %r had storage %r, but should be %r." % (
address,
actual_storage_root,
expected_storage_root,
))
#
# Balance
#
def get_balance(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.balance
def set_balance(self, address: Address, balance: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(balance, title="Account Balance")
account = self._get_account(address)
self._set_account(address, account.copy(balance=balance))
#
# Nonce
#
def get_nonce(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.nonce
def set_nonce(self, address: Address, nonce: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(nonce, title="Nonce")
account = self._get_account(address)
self._set_account(address, account.copy(nonce=nonce))
def increment_nonce(self, address: Address) -> None:
current_nonce = self.get_nonce(address)
self.set_nonce(address, current_nonce + 1)
#
# Code
#
def get_code(self, address: Address) -> bytes:
validate_canonical_address(address, title="Storage Address")
code_hash = self.get_code_hash(address)
if code_hash == EMPTY_SHA3:
return b''
else:
try:
return self._journaldb[code_hash]
except KeyError:
raise MissingBytecode(code_hash) from KeyError
def set_code(self, address: Address, code: bytes) -> None:
validate_canonical_address(address, title="Storage Address")
validate_is_bytes(code, title="Code")
account = self._get_account(address)
code_hash = keccak(code)
self._journaldb[code_hash] = code
self._set_account(address, account.copy(code_hash=code_hash))
def get_code_hash(self, address: Address) -> Hash32:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.code_hash
def delete_code(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account.copy(code_hash=EMPTY_SHA3))
#
# Account Methods
#
def account_has_code_or_nonce(self, address: Address) -> bool:
return self.get_nonce(address) != 0 or self.get_code_hash(
address) != EMPTY_SHA3
def delete_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
if address in self._account_cache:
del self._account_cache[address]
del self._journaltrie[address]
self._wipe_storage(address)
def account_exists(self, address: Address) -> bool:
validate_canonical_address(address, title="Storage Address")
account_rlp = self._get_encoded_account(address, from_journal=True)
return account_rlp != b''
def touch_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account)
def account_is_empty(self, address: Address) -> bool:
return not self.account_has_code_or_nonce(
address) and self.get_balance(address) == 0
#
# Internal
#
def _get_encoded_account(self,
address: Address,
from_journal: bool = True) -> bytes:
lookup_trie = self._journaltrie if from_journal else self._trie_cache
try:
return lookup_trie[address]
except trie_exceptions.MissingTrieNode as exc:
raise MissingAccountTrieNode(*exc.args) from exc
except KeyError:
# In case the account is deleted in the JournalDB
return b''
def _get_account(self,
address: Address,
from_journal: bool = True) -> Account:
if from_journal and address in self._account_cache:
return self._account_cache[address]
rlp_account = self._get_encoded_account(address, from_journal)
if rlp_account:
account = rlp.decode(rlp_account, sedes=Account)
else:
account = Account()
if from_journal:
self._account_cache[address] = account
return account
def _set_account(self, address: Address, account: Account) -> None:
self._account_cache[address] = account
rlp_account = rlp.encode(account, sedes=Account)
self._journaltrie[address] = rlp_account
#
# Record and discard API
#
def record(self) -> JournalDBCheckpoint:
checkpoint = self._journaldb.record()
self._journaltrie.record(checkpoint)
for _, store in self._dirty_account_stores():
store.record(checkpoint)
return checkpoint
def discard(self, checkpoint: JournalDBCheckpoint) -> None:
self._journaldb.discard(checkpoint)
self._journaltrie.discard(checkpoint)
self._account_cache.clear()
for _, store in self._dirty_account_stores():
store.discard(checkpoint)
def commit(self, checkpoint: JournalDBCheckpoint) -> None:
self._journaldb.commit(checkpoint)
self._journaltrie.commit(checkpoint)
for _, store in self._dirty_account_stores():
store.commit(checkpoint)
def make_state_root(self) -> Hash32:
for _, store in self._dirty_account_stores():
store.make_storage_root()
for address, storage_root in self._get_changed_roots():
self.logger.debug2(
"Updating account 0x%s to storage root 0x%s",
address.hex(),
storage_root.hex(),
)
self._set_storage_root(address, storage_root)
self._journaldb.persist()
diff = self._journaltrie.diff()
# In addition to squashing (which is redundant here), this context manager causes
# an atomic commit of the changes, so exceptions will revert the trie
with self._trie.squash_changes() as memory_trie:
self._apply_account_diff_without_proof(diff, memory_trie)
self._journaltrie.reset()
self._trie_cache.reset_cache()
return self.state_root
def persist(self) -> None:
self.make_state_root()
# persist storage
with self._raw_store_db.atomic_batch() as write_batch:
for address, store in self._dirty_account_stores():
self._validate_flushed_storage(address, store)
store.persist(write_batch)
for address, new_root in self._get_changed_roots():
if new_root not in self._raw_store_db and new_root != BLANK_ROOT_HASH:
raise ValidationError(
"After persisting storage trie, a root node was not found. "
"State root for account 0x%s is missing for hash 0x%s." % (
address.hex(),
new_root.hex(),
))
# reset local storage trackers
self._account_stores = {}
self._dirty_accounts = set()
# persist accounts
self._validate_generated_root()
new_root_hash = self.state_root
self.logger.debug2("Persisting new state root: 0x%s",
new_root_hash.hex())
with self._raw_store_db.atomic_batch() as write_batch:
self._batchtrie.commit_to(write_batch, apply_deletes=False)
self._batchdb.commit_to(write_batch, apply_deletes=False)
self._root_hash_at_last_persist = new_root_hash
def _validate_generated_root(self) -> None:
db_diff = self._journaldb.diff()
if len(db_diff):
raise ValidationError(
"AccountDB had a dirty db when it needed to be clean: %r" %
db_diff)
trie_diff = self._journaltrie.diff()
if len(trie_diff):
raise ValidationError(
"AccountDB had a dirty trie when it needed to be clean: %r" %
trie_diff)
def _log_pending_accounts(self) -> None:
diff = self._journaltrie.diff()
for address in sorted(diff.pending_keys()):
account = self._get_account(Address(address))
self.logger.debug2(
"Pending Account %s: balance %d, nonce %d, storage root %s, code hash %s",
to_checksum_address(address),
account.balance,
account.nonce,
encode_hex(account.storage_root),
encode_hex(account.code_hash),
)
for deleted_address in sorted(diff.deleted_keys()):
cast_deleted_address = Address(deleted_address)
self.logger.debug2(
"Deleted Account %s, empty? %s, exists? %s",
to_checksum_address(deleted_address),
self.account_is_empty(cast_deleted_address),
self.account_exists(cast_deleted_address),
)
def _apply_account_diff_without_proof(self, diff: DBDiff,
trie: BaseDB) -> None:
"""
Apply diff of trie updates, when original nodes might be missing.
Note that doing this naively will raise exceptions about missing nodes
from *intermediate* trie roots. This captures exceptions and uses the previous
trie root hash that will be recognized by other nodes.
"""
# It's fairly common that when an account is deleted, we need to retrieve nodes
# for accounts that were not needed during normal execution. We only need these
# nodes to refactor the trie.
for delete_key in diff.deleted_keys():
try:
del trie[delete_key]
except trie_exceptions.MissingTrieNode as exc:
self.logger.debug(
"Missing node while deleting account with key %s: %s",
encode_hex(delete_key),
exc,
)
raise MissingAccountTrieNode(
exc.missing_node_hash,
self._root_hash_at_last_persist,
exc.requested_key,
) from exc
# It's fairly unusual, but possible, that setting an account will need unknown
# nodes during a trie refactor. Here is an example that seems to cause it:
#
# Setup:
# - Root node is a branch, with 0 pointing to a leaf
# - The complete leaf key is (0, 1, 2), so (1, 2) is in the leaf node
# - We know the leaf node hash but not the leaf node body
# Refactor that triggers missing node:
# - Add value with key (0, 3, 4)
# - We need to replace the current leaf node with a branch that points leaves at 1 and 3
# - The leaf for key (0, 1, 2) now contains only the (2) part, so needs to be rebuilt
# - We need the full body of the old (1, 2) leaf node, to rebuild
for key, val in diff.pending_items():
try:
trie[key] = val
except trie_exceptions.MissingTrieNode as exc:
self.logger.debug(
"Missing node on account update key %s to %s: %s",
encode_hex(key),
encode_hex(val),
exc,
)
raise MissingAccountTrieNode(
exc.missing_node_hash,
self._root_hash_at_last_persist,
exc.requested_key,
) from exc
class AccountStorageDB(AccountStorageDatabaseAPI):
logger = get_extended_debug_logger("eth.db.storage.AccountStorageDB")
def __init__(self, db: AtomicDatabaseAPI, storage_root: Hash32, address: Address) -> None:
"""
Database entries go through several pipes, like so...
.. code::
db -> _storage_lookup -> _storage_cache -> _locked_changes -> _journal_storage
db is the raw database, we can assume it hits disk when written to.
Keys are stored as node hashes and rlp-encoded node values.
_storage_lookup is itself a pair of databases: (BatchDB -> HexaryTrie),
writes to storage lookup *are* immeditaely applied to a trie, generating
the appropriate trie nodes and and root hash (via the HexaryTrie). The
writes are *not* persisted to db, until _storage_lookup is explicitly instructed to,
via :meth:`StorageLookup.commit_to`
_storage_cache is a cache tied to the state root of the trie. It
is important that this cache is checked *after* looking for
the key in _journal_storage, because the cache is only invalidated
after a state root change. Otherwise, you will see data since the last
storage root was calculated.
_locked_changes is a batch database that includes only those values that are
un-revertable in the EVM. Currently, that means changes that completed in a
previous transaction.
Journaling batches writes at the _journal_storage layer, until persist is called.
It manages all the checkpointing and rollbacks that happen during EVM execution.
In both _storage_cache and _journal_storage, Keys are set/retrieved as the
big_endian encoding of the slot integer, and the rlp-encoded value.
"""
self._address = address
self._storage_lookup = StorageLookup(db, storage_root, address)
self._storage_cache = CacheDB(self._storage_lookup)
self._locked_changes = BatchDB(self._storage_cache)
self._journal_storage = JournalDB(self._locked_changes)
def get(self, slot: int, from_journal: bool=True) -> int:
key = int_to_big_endian(slot)
lookup_db = self._journal_storage if from_journal else self._locked_changes
try:
encoded_value = lookup_db[key]
except MissingStorageTrieNode:
raise
except KeyError:
return 0
if encoded_value == b'':
return 0
else:
return rlp.decode(encoded_value, sedes=rlp.sedes.big_endian_int)
def set(self, slot: int, value: int) -> None:
key = int_to_big_endian(slot)
if value:
self._journal_storage[key] = rlp.encode(value)
else:
del self._journal_storage[key]
def delete(self) -> None:
self.logger.debug2(
"Deleting all storage in account 0x%s, hashed 0x%s",
self._address.hex(),
keccak(self._address).hex(),
)
self._journal_storage.clear()
self._storage_cache.reset_cache()
def record(self, checkpoint: JournalDBCheckpoint) -> None:
self._journal_storage.record(checkpoint)
def discard(self, checkpoint: JournalDBCheckpoint) -> None:
self.logger.debug2('discard checkpoint %r', checkpoint)
if self._journal_storage.has_checkpoint(checkpoint):
self._journal_storage.discard(checkpoint)
else:
# if the checkpoint comes before this account started tracking,
# then simply reset to the beginning
self._journal_storage.reset()
self._storage_cache.reset_cache()
def commit(self, checkpoint: JournalDBCheckpoint) -> None:
if self._journal_storage.has_checkpoint(checkpoint):
self._journal_storage.commit(checkpoint)
else:
# if the checkpoint comes before this account started tracking,
# then flatten all changes, without persisting
self._journal_storage.flatten()
def lock_changes(self) -> None:
self._journal_storage.persist()
def make_storage_root(self) -> None:
self.lock_changes()
self._locked_changes.commit(apply_deletes=True)
def _validate_flushed(self) -> None:
"""
Will raise an exception if there are some changes made since the last persist.
"""
journal_diff = self._journal_storage.diff()
if len(journal_diff) > 0:
raise ValidationError(
f"StorageDB had a dirty journal when it needed to be clean: {journal_diff!r}"
)
@property
def has_changed_root(self) -> bool:
return self._storage_lookup.has_changed_root
def get_changed_root(self) -> Hash32:
return self._storage_lookup.get_changed_root()
def persist(self, db: DatabaseAPI) -> None:
self._validate_flushed()
if self._storage_lookup.has_changed_root:
self._storage_lookup.commit_to(db)
class AccountDB(AccountDatabaseAPI):
logger = get_extended_debug_logger('eth.db.account.AccountDB')
def __init__(self,
db: AtomicDatabaseAPI,
state_root: Hash32 = BLANK_ROOT_HASH) -> None:
r"""
Internal implementation details (subject to rapid change):
Database entries go through several pipes, like so...
.. code::
db > _batchdb ---------------------------> _journaldb ----------------> code lookups
\
-> _batchtrie -> _trie -> _trie_cache -> _journaltrie --------------> account lookups
Journaling sequesters writes at the _journal* attrs ^, until persist is called.
_batchtrie enables us to prune all trie changes while building
state, without deleting old trie roots.
_batchdb and _batchtrie together enable us to make the state root,
without saving everything to the database.
_journaldb is a journaling of the keys and values used to store
code and account storage.
_trie is a hash-trie, used to generate the state root
_trie_cache is a cache tied to the state root of the trie. It
is important that this cache is checked *after* looking for
the key in _journaltrie, because the cache is only invalidated
after a state root change.
_journaltrie is a journaling of the accounts (an address->rlp mapping,
rather than the nodes stored by the trie). This enables
a squashing of all account changes before pushing them into the trie.
.. NOTE:: StorageDB works similarly
AccountDB synchronizes the snapshot/revert/persist of both of the
journals.
"""
self._raw_store_db = KeyAccessLoggerAtomicDB(db,
log_missing_keys=False)
self._batchdb = BatchDB(self._raw_store_db)
self._batchtrie = BatchDB(self._raw_store_db,
read_through_deletes=True)
self._journaldb = JournalDB(self._batchdb)
self._trie = HashTrie(
HexaryTrie(self._batchtrie, state_root, prune=True))
self._trie_logger = KeyAccessLoggerDB(self._trie,
log_missing_keys=False)
self._trie_cache = CacheDB(self._trie_logger)
self._journaltrie = JournalDB(self._trie_cache)
self._account_cache = LRU(2048)
self._account_stores: Dict[Address, AccountStorageDatabaseAPI] = {}
self._dirty_accounts: Set[Address] = set()
self._root_hash_at_last_persist = state_root
self._accessed_accounts: Set[Address] = set()
self._accessed_bytecodes: Set[Address] = set()
# Track whether an account or slot have been accessed during a given transaction:
self._reset_access_counters()
@property
def state_root(self) -> Hash32:
return self._trie.root_hash
@state_root.setter
def state_root(self, value: Hash32) -> None:
if self._trie.root_hash != value:
self._trie_cache.reset_cache()
self._trie.root_hash = value
def has_root(self, state_root: bytes) -> bool:
return state_root in self._batchtrie
#
# Storage
#
def get_storage(self,
address: Address,
slot: int,
from_journal: bool = True) -> int:
validate_canonical_address(address, title="Storage Address")
validate_uint256(slot, title="Storage Slot")
account_store = self._get_address_store(address)
return account_store.get(slot, from_journal)
def set_storage(self, address: Address, slot: int, value: int) -> None:
validate_uint256(value, title="Storage Value")
validate_uint256(slot, title="Storage Slot")
validate_canonical_address(address, title="Storage Address")
account_store = self._get_address_store(address)
self._dirty_accounts.add(address)
account_store.set(slot, value)
def delete_storage(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
self._set_storage_root(address, BLANK_ROOT_HASH)
self._wipe_storage(address)
def is_storage_warm(self, address: Address, slot: int) -> bool:
key = self._get_storage_tracker_key(address, slot)
return key in self._journal_accessed_state
def mark_storage_warm(self, address: Address, slot: int) -> None:
key = self._get_storage_tracker_key(address, slot)
if key not in self._journal_accessed_state:
self._journal_accessed_state[key] = IS_PRESENT_VALUE
def _get_storage_tracker_key(self, address: Address, slot: int) -> bytes:
"""
Get the key used to track whether a storage slot has been accessed
during this transaction.
"""
return address + int_to_big_endian(slot)
def _wipe_storage(self, address: Address) -> None:
"""
Wipe out the storage, without explicitly handling the storage root update
"""
account_store = self._get_address_store(address)
self._dirty_accounts.add(address)
account_store.delete()
def _get_address_store(self,
address: Address) -> AccountStorageDatabaseAPI:
if address in self._account_stores:
store = self._account_stores[address]
else:
storage_root = self._get_storage_root(address)
store = AccountStorageDB(self._raw_store_db, storage_root, address)
self._account_stores[address] = store
return store
def _dirty_account_stores(
self) -> Iterable[Tuple[Address, AccountStorageDatabaseAPI]]:
for address in self._dirty_accounts:
store = self._account_stores[address]
yield address, store
@to_tuple
def _get_changed_roots(self) -> Iterable[Tuple[Address, Hash32]]:
# list all the accounts that were changed, and their new storage roots
for address, store in self._dirty_account_stores():
if store.has_changed_root:
yield address, store.get_changed_root()
def _get_storage_root(self, address: Address) -> Hash32:
account = self._get_account(address)
return account.storage_root
def _set_storage_root(self, address: Address,
new_storage_root: Hash32) -> None:
account = self._get_account(address)
self._set_account(address, account.copy(storage_root=new_storage_root))
def _validate_flushed_storage(self, address: Address,
store: AccountStorageDatabaseAPI) -> None:
if store.has_changed_root:
actual_storage_root = self._get_storage_root(address)
expected_storage_root = store.get_changed_root()
if expected_storage_root != actual_storage_root:
raise ValidationError(
"Storage root was not saved to account before trying to persist roots. "
f"Account {address!r} had storage {actual_storage_root!r}, "
f"but should be {expected_storage_root!r}.")
#
# Balance
#
def get_balance(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.balance
def set_balance(self, address: Address, balance: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(balance, title="Account Balance")
account = self._get_account(address)
self._set_account(address, account.copy(balance=balance))
#
# Nonce
#
def get_nonce(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.nonce
def set_nonce(self, address: Address, nonce: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(nonce, title="Nonce")
account = self._get_account(address)
self._set_account(address, account.copy(nonce=nonce))
def increment_nonce(self, address: Address) -> None:
current_nonce = self.get_nonce(address)
self.set_nonce(address, current_nonce + 1)
#
# Code
#
def get_code(self, address: Address) -> bytes:
validate_canonical_address(address, title="Storage Address")
code_hash = self.get_code_hash(address)
if code_hash == EMPTY_SHA3:
return b''
else:
try:
return self._journaldb[code_hash]
except KeyError:
raise MissingBytecode(code_hash) from KeyError
finally:
if code_hash in self._get_accessed_node_hashes():
self._accessed_bytecodes.add(address)
def set_code(self, address: Address, code: bytes) -> None:
validate_canonical_address(address, title="Storage Address")
validate_is_bytes(code, title="Code")
account = self._get_account(address)
code_hash = keccak(code)
self._journaldb[code_hash] = code
self._set_account(address, account.copy(code_hash=code_hash))
def get_code_hash(self, address: Address) -> Hash32:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.code_hash
def delete_code(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account.copy(code_hash=EMPTY_SHA3))
#
# Account Methods
#
def account_has_code_or_nonce(self, address: Address) -> bool:
return self.get_nonce(address) != 0 or self.get_code_hash(
address) != EMPTY_SHA3
def delete_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
# We must wipe the storage first, because if it's the first time we load it,
# then we want to load it with the original storage root hash, not the
# empty one. (in case of a later revert, we don't want to poison the storage cache)
self._wipe_storage(address)
if address in self._account_cache:
del self._account_cache[address]
del self._journaltrie[address]
def account_exists(self, address: Address) -> bool:
validate_canonical_address(address, title="Storage Address")
account_rlp = self._get_encoded_account(address, from_journal=True)
return account_rlp != b''
def touch_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account)
def account_is_empty(self, address: Address) -> bool:
return not self.account_has_code_or_nonce(
address) and self.get_balance(address) == 0
def is_address_warm(self, address: Address) -> bool:
return address in self._journal_accessed_state
def mark_address_warm(self, address: Address) -> None:
if address not in self._journal_accessed_state:
self._journal_accessed_state[address] = IS_PRESENT_VALUE
#
# Internal
#
def _get_encoded_account(self,
address: Address,
from_journal: bool = True) -> bytes:
self._accessed_accounts.add(address)
lookup_trie = self._journaltrie if from_journal else self._trie_cache
try:
return lookup_trie[address]
except trie_exceptions.MissingTrieNode as exc:
raise MissingAccountTrieNode(*exc.args) from exc
except KeyError:
# In case the account is deleted in the JournalDB
return b''
def _get_account(self,
address: Address,
from_journal: bool = True) -> Account:
if from_journal and address in self._account_cache:
return self._account_cache[address]
rlp_account = self._get_encoded_account(address, from_journal)
if rlp_account:
account = rlp.decode(rlp_account, sedes=Account)
else:
account = Account()
if from_journal:
self._account_cache[address] = account
return account
def _set_account(self, address: Address, account: Account) -> None:
self._account_cache[address] = account
rlp_account = rlp.encode(account, sedes=Account)
self._journaltrie[address] = rlp_account
def _reset_access_counters(self) -> None:
# Account accesses and storage accesses recorded in the same journal
# Accounts just use the address as the key (and an empty value as a flag)
# Storage use a concatenation of address and slot converted to bytes (and empty value)
self._journal_accessed_state = JournalDB(MemoryDB())
#
# Record and discard API
#
def record(self) -> JournalDBCheckpoint:
checkpoint = self._journaldb.record()
self._journaltrie.record(checkpoint)
self._journal_accessed_state.record(checkpoint)
for _, store in self._dirty_account_stores():
store.record(checkpoint)
return checkpoint
def discard(self, checkpoint: JournalDBCheckpoint) -> None:
self._journaldb.discard(checkpoint)
self._journaltrie.discard(checkpoint)
self._journal_accessed_state.discard(checkpoint)
self._account_cache.clear()
for _, store in self._dirty_account_stores():
store.discard(checkpoint)
def commit(self, checkpoint: JournalDBCheckpoint) -> None:
self._journaldb.commit(checkpoint)
self._journaltrie.commit(checkpoint)
self._journal_accessed_state.commit(checkpoint)
for _, store in self._dirty_account_stores():
store.commit(checkpoint)
def lock_changes(self) -> None:
for _, store in self._dirty_account_stores():
store.lock_changes()
self._reset_access_counters()
def make_state_root(self) -> Hash32:
for _, store in self._dirty_account_stores():
store.make_storage_root()
for address, storage_root in self._get_changed_roots():
self.logger.debug2(
"Updating account 0x%s to storage root 0x%s",
address.hex(),
storage_root.hex(),
)
if self.account_exists(address) or storage_root != BLANK_ROOT_HASH:
self._set_storage_root(address, storage_root)
self._journaldb.persist()
diff = self._journaltrie.diff()
if diff.deleted_keys() or diff.pending_items():
# In addition to squashing (which is redundant here), this context manager causes
# an atomic commit of the changes, so exceptions will revert the trie
with self._trie.squash_changes() as memory_trie:
self._apply_account_diff_without_proof(diff, memory_trie)
self._journaltrie.reset()
self._trie_cache.reset_cache()
return self.state_root
def persist(self) -> MetaWitnessAPI:
self.make_state_root()
# persist storage
with self._raw_store_db.atomic_batch() as write_batch:
for address, store in self._dirty_account_stores():
self._validate_flushed_storage(address, store)
store.persist(write_batch)
for address, new_root in self._get_changed_roots():
if new_root is None:
raise ValidationError(
f"Cannot validate new root of account 0x{address.hex()} "
f"which has a new root hash of None")
elif new_root not in self._raw_store_db and new_root != BLANK_ROOT_HASH:
raise ValidationError(
"After persisting storage trie, a root node was not found. "
f"State root for account 0x{address.hex()} "
f"is missing for hash 0x{new_root.hex()}.")
# generate witness (copy) before clearing the underlying data
meta_witness = self._get_meta_witness()
# reset local storage trackers
self._account_stores = {}
self._dirty_accounts = set()
self._accessed_accounts = set()
self._accessed_bytecodes = set()
# We have to clear the account cache here so that future account accesses
# will get added to _accessed_accounts correctly. Account accesses that
# are cached do not add the address to the list of accessed accounts.
self._account_cache.clear()
# persist accounts
self._validate_generated_root()
new_root_hash = self.state_root
self.logger.debug2("Persisting new state root: 0x%s",
new_root_hash.hex())
with self._raw_store_db.atomic_batch() as write_batch:
self._batchtrie.commit_to(write_batch, apply_deletes=False)
self._batchdb.commit_to(write_batch, apply_deletes=False)
self._root_hash_at_last_persist = new_root_hash
return meta_witness
def _get_accessed_node_hashes(self) -> Set[Hash32]:
return cast(Set[Hash32], self._raw_store_db.keys_read)
@to_dict
def _get_access_list(
self) -> Iterable[Tuple[Address, AccountQueryTracker]]:
"""
Get the list of addresses that were accessed, whether the bytecode was accessed, and
which storage slots were accessed.
"""
for address in self._accessed_accounts:
did_access_bytecode = address in self._accessed_bytecodes
if address in self._account_stores:
accessed_storage_slots = self._account_stores[
address].get_accessed_slots()
else:
accessed_storage_slots = frozenset()
yield address, AccountQueryTracker(did_access_bytecode,
accessed_storage_slots)
def _get_meta_witness(self) -> MetaWitness:
"""
Get a variety of metadata about the state witness needed to execute the block.
This creates a copy, so that underlying changes do not affect the returned MetaWitness.
"""
return MetaWitness(self._get_accessed_node_hashes(),
self._get_access_list())
def _validate_generated_root(self) -> None:
db_diff = self._journaldb.diff()
if len(db_diff):
raise ValidationError(
f"AccountDB had a dirty db when it needed to be clean: {db_diff!r}"
)
trie_diff = self._journaltrie.diff()
if len(trie_diff):
raise ValidationError(
f"AccountDB had a dirty trie when it needed to be clean: {trie_diff!r}"
)
def _log_pending_accounts(self) -> None:
# This entire method is about debug2 logging, so skip it if debug2 is disabled
if not self.logger.show_debug2:
return
diff = self._journaltrie.diff()
for address in sorted(diff.pending_keys()):
account = self._get_account(Address(address))
self.logger.debug2(
"Pending Account %s: balance %d, nonce %d, storage root %s, code hash %s",
to_checksum_address(address),
account.balance,
account.nonce,
encode_hex(account.storage_root),
encode_hex(account.code_hash),
)
for deleted_address in sorted(diff.deleted_keys()):
# Check if the account was accessed before accessing/logging info about the address
was_account_accessed = deleted_address in self._accessed_accounts
cast_deleted_address = Address(deleted_address)
self.logger.debug2(
"Deleted Account %s, empty? %s, exists? %s",
to_checksum_address(deleted_address),
self.account_is_empty(cast_deleted_address),
self.account_exists(cast_deleted_address),
)
# If the account was not accessed previous to the log, (re)mark it as not accessed
if not was_account_accessed:
self._accessed_accounts.remove(cast_deleted_address)
def _apply_account_diff_without_proof(self, diff: DBDiff,
trie: DatabaseAPI) -> None:
"""
Apply diff of trie updates, when original nodes might be missing.
Note that doing this naively will raise exceptions about missing nodes
from *intermediate* trie roots. This captures exceptions and uses the previous
trie root hash that will be recognized by other nodes.
"""
# It's fairly common that when an account is deleted, we need to retrieve nodes
# for accounts that were not needed during normal execution. We only need these
# nodes to refactor the trie.
for delete_key in diff.deleted_keys():
try:
del trie[delete_key]
except trie_exceptions.MissingTrieNode as exc:
self.logger.debug(
"Missing node while deleting account with key %s: %s",
encode_hex(delete_key),
exc,
)
raise MissingAccountTrieNode(
exc.missing_node_hash,
self._root_hash_at_last_persist,
exc.requested_key,
) from exc
# It's fairly unusual, but possible, that setting an account will need unknown
# nodes during a trie refactor. Here is an example that seems to cause it:
#
# Setup:
# - Root node is a branch, with 0 pointing to a leaf
# - The complete leaf key is (0, 1, 2), so (1, 2) is in the leaf node
# - We know the leaf node hash but not the leaf node body
# Refactor that triggers missing node:
# - Add value with key (0, 3, 4)
# - We need to replace the current leaf node with a branch that points leaves at 1 and 3
# - The leaf for key (0, 1, 2) now contains only the (2) part, so needs to be rebuilt
# - We need the full body of the old (1, 2) leaf node, to rebuild
for key, val in diff.pending_items():
try:
trie[key] = val
except trie_exceptions.MissingTrieNode as exc:
self.logger.debug(
"Missing node on account update key %s to %s: %s",
encode_hex(key),
encode_hex(val),
exc,
)
raise MissingAccountTrieNode(
exc.missing_node_hash,
self._root_hash_at_last_persist,
exc.requested_key,
) from exc
class AccountDB(BaseAccountDB):
logger = cast(ExtendedDebugLogger, logging.getLogger('eth.db.account.AccountDB'))
def __init__(self, db: BaseAtomicDB, state_root: Hash32=BLANK_ROOT_HASH) -> None:
r"""
Internal implementation details (subject to rapid change):
Database entries go through several pipes, like so...
.. code::
db > _batchdb ---------------------------> _journaldb ----------------> code lookups
\
-> _batchtrie -> _trie -> _trie_cache -> _journaltrie --------------> account lookups
Journaling sequesters writes at the _journal* attrs ^, until persist is called.
_batchtrie enables us to prune all trie changes while building
state, without deleting old trie roots.
_batchdb and _batchtrie together enable us to make the state root,
without saving everything to the database.
_journaldb is a journaling of the keys and values used to store
code and account storage.
_trie is a hash-trie, used to generate the state root
_trie_cache is a cache tied to the state root of the trie. It
is important that this cache is checked *after* looking for
the key in _journaltrie, because the cache is only invalidated
after a state root change.
_journaltrie is a journaling of the accounts (an address->rlp mapping,
rather than the nodes stored by the trie). This enables
a squashing of all account changes before pushing them into the trie.
.. NOTE:: StorageDB works similarly
AccountDB synchronizes the snapshot/revert/persist of both of the
journals.
"""
self._raw_store_db = db
self._batchdb = BatchDB(db)
self._batchtrie = BatchDB(db)
self._journaldb = JournalDB(self._batchdb)
self._trie = HashTrie(HexaryTrie(self._batchtrie, state_root, prune=True))
self._trie_cache = CacheDB(self._trie)
self._journaltrie = JournalDB(self._trie_cache)
self._account_cache = LRU(2048)
self._account_stores = {} # type: Dict[Address, AccountStorageDB]
self._dirty_accounts = set() # type: Set[Address]
@property
def state_root(self) -> Hash32:
return self._trie.root_hash
@state_root.setter
def state_root(self, value: Hash32) -> None:
if self._trie.root_hash != value:
self._trie_cache.reset_cache()
self._trie.root_hash = value
def has_root(self, state_root: bytes) -> bool:
return state_root in self._batchtrie
#
# Storage
#
def get_storage(self, address: Address, slot: int, from_journal: bool=True) -> int:
validate_canonical_address(address, title="Storage Address")
validate_uint256(slot, title="Storage Slot")
account_store = self._get_address_store(address)
return account_store.get(slot, from_journal)
def set_storage(self, address: Address, slot: int, value: int) -> None:
validate_uint256(value, title="Storage Value")
validate_uint256(slot, title="Storage Slot")
validate_canonical_address(address, title="Storage Address")
account_store = self._get_address_store(address)
self._dirty_accounts.add(address)
account_store.set(slot, value)
def delete_storage(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
self._set_storage_root(address, BLANK_ROOT_HASH)
self._wipe_storage(address)
def _wipe_storage(self, address: Address) -> None:
"""
Wipe out the storage, without explicitly handling the storage root update
"""
account_store = self._get_address_store(address)
self._dirty_accounts.add(address)
account_store.delete()
def _get_address_store(self, address: Address) -> AccountStorageDB:
if address in self._account_stores:
store = self._account_stores[address]
else:
storage_root = self._get_storage_root(address)
store = AccountStorageDB(self._raw_store_db, storage_root, address)
self._account_stores[address] = store
return store
def _dirty_account_stores(self) -> Iterable[Tuple[Address, AccountStorageDB]]:
for address in self._dirty_accounts:
store = self._account_stores[address]
yield address, store
@to_tuple
def _get_changed_roots(self) -> Iterable[Tuple[Address, Hash32]]:
# list all the accounts that were changed, and their new storage roots
for address, store in self._dirty_account_stores():
if store.has_changed_root:
yield address, store.get_changed_root()
def _get_storage_root(self, address: Address) -> Hash32:
account = self._get_account(address)
return account.storage_root
def _set_storage_root(self, address: Address, new_storage_root: Hash32) -> None:
account = self._get_account(address)
self._set_account(address, account.copy(storage_root=new_storage_root))
def _validate_flushed_storage(self, address: Address, store: AccountStorageDB) -> None:
if store.has_changed_root:
actual_storage_root = self._get_storage_root(address)
expected_storage_root = store.get_changed_root()
if expected_storage_root != actual_storage_root:
raise ValidationError(
"Storage root was not saved to account before trying to persist roots. "
"Account %r had storage %r, but should be %r." % (
address,
actual_storage_root,
expected_storage_root,
)
)
#
# Balance
#
def get_balance(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.balance
def set_balance(self, address: Address, balance: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(balance, title="Account Balance")
account = self._get_account(address)
self._set_account(address, account.copy(balance=balance))
#
# Nonce
#
def get_nonce(self, address: Address) -> int:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.nonce
def set_nonce(self, address: Address, nonce: int) -> None:
validate_canonical_address(address, title="Storage Address")
validate_uint256(nonce, title="Nonce")
account = self._get_account(address)
self._set_account(address, account.copy(nonce=nonce))
def increment_nonce(self, address: Address) -> None:
current_nonce = self.get_nonce(address)
self.set_nonce(address, current_nonce + 1)
#
# Code
#
def get_code(self, address: Address) -> bytes:
validate_canonical_address(address, title="Storage Address")
try:
return self._journaldb[self.get_code_hash(address)]
except KeyError:
return b""
def set_code(self, address: Address, code: bytes) -> None:
validate_canonical_address(address, title="Storage Address")
validate_is_bytes(code, title="Code")
account = self._get_account(address)
code_hash = keccak(code)
self._journaldb[code_hash] = code
self._set_account(address, account.copy(code_hash=code_hash))
def get_code_hash(self, address: Address) -> Hash32:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
return account.code_hash
def delete_code(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account.copy(code_hash=EMPTY_SHA3))
#
# Account Methods
#
def account_has_code_or_nonce(self, address: Address) -> bool:
return self.get_nonce(address) != 0 or self.get_code_hash(address) != EMPTY_SHA3
def delete_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
if address in self._account_cache:
del self._account_cache[address]
del self._journaltrie[address]
self._wipe_storage(address)
def account_exists(self, address: Address) -> bool:
validate_canonical_address(address, title="Storage Address")
return self._journaltrie.get(address, b'') != b''
def touch_account(self, address: Address) -> None:
validate_canonical_address(address, title="Storage Address")
account = self._get_account(address)
self._set_account(address, account)
def account_is_empty(self, address: Address) -> bool:
return not self.account_has_code_or_nonce(address) and self.get_balance(address) == 0
#
# Internal
#
def _get_account(self, address: Address, from_journal: bool=True) -> Account:
if from_journal and address in self._account_cache:
return self._account_cache[address]
rlp_account = (self._journaltrie if from_journal else self._trie_cache).get(address, b'')
if rlp_account:
account = rlp.decode(rlp_account, sedes=Account)
else:
account = Account()
if from_journal:
self._account_cache[address] = account
return account
def _set_account(self, address: Address, account: Account) -> None:
self._account_cache[address] = account
rlp_account = rlp.encode(account, sedes=Account)
self._journaltrie[address] = rlp_account
#
# Record and discard API
#
def record(self) -> UUID:
changeset_id = self._journaldb.record()
self._journaltrie.record(changeset_id)
for _, store in self._dirty_account_stores():
store.record(changeset_id)
return changeset_id
def discard(self, changeset: UUID) -> None:
self._journaldb.discard(changeset)
self._journaltrie.discard(changeset)
self._account_cache.clear()
for _, store in self._dirty_account_stores():
store.discard(changeset)
def commit(self, changeset: UUID) -> None:
self._journaldb.commit(changeset)
self._journaltrie.commit(changeset)
for _, store in self._dirty_account_stores():
store.commit(changeset)
def make_state_root(self) -> Hash32:
for _, store in self._dirty_account_stores():
store.make_storage_root()
for address, storage_root in self._get_changed_roots():
self.logger.debug2(
"Updating account 0x%s to storage root 0x%s",
address.hex(),
storage_root.hex(),
)
self._set_storage_root(address, storage_root)
self._journaldb.persist()
self._journaltrie.persist()
return self.state_root
def persist(self) -> None:
self.make_state_root()
# persist storage
with self._raw_store_db.atomic_batch() as write_batch:
for address, store in self._dirty_account_stores():
self._validate_flushed_storage(address, store)
store.persist(write_batch)
for address, new_root in self._get_changed_roots():
if new_root not in self._raw_store_db and new_root != BLANK_ROOT_HASH:
raise ValidationError(
"After persisting storage trie, a root node was not found. "
"State root for account 0x%s is missing for hash 0x%s." % (
address.hex(),
new_root.hex(),
)
)
# reset local storage trackers
self._account_stores = {}
self._dirty_accounts = set()
# persist accounts
self._validate_generated_root()
with self._raw_store_db.atomic_batch() as write_batch:
self._batchtrie.commit_to(write_batch, apply_deletes=False)
self._batchdb.commit_to(write_batch, apply_deletes=False)
def _validate_generated_root(self) -> None:
db_diff = self._journaldb.diff()
if len(db_diff):
raise ValidationError(
"AccountDB had a dirty db when it needed to be clean: %r" % db_diff
)
trie_diff = self._journaltrie.diff()
if len(trie_diff):
raise ValidationError(
"AccountDB had a dirty trie when it needed to be clean: %r" % trie_diff
)
def _log_pending_accounts(self) -> None:
accounts_displayed = set() # type: Set[bytes]
queued_changes = self._journaltrie.journal.journal_data.items()
# mypy bug for ordered dict reversibility: https://github.com/python/typeshed/issues/2078
for _, accounts in reversed(queued_changes):
for address in accounts:
if address in accounts_displayed:
continue
else:
accounts_displayed.add(address)
account = self._get_account(Address(address))
self.logger.debug2(
"Account %s: balance %d, nonce %d, storage root %s, code hash %s",
encode_hex(address),
account.balance,
account.nonce,
encode_hex(account.storage_root),
encode_hex(account.code_hash),
)