def api_vpls(self, command, peers, action):
tokens = formated(command).split(' ')[1:]
if len(tokens) < 4:
return False
if tokens[0] != 'vpls':
return False
changes = []
if 'self' in command:
for peer, nexthop in peers.iteritems():
scope = [{}]
self._nexthopself = nexthop
if not self.l2vpn.vpls(scope, 'l2vpn', 'vpls', tokens[1:]):
self._nexthopself = None
return False
for change in scope[0]['announce']:
changes.append((peer, change))
self._nexthopself = None
else:
scope = [{}]
if not self.l2vpn.vpls(scope, 'l2vpn', 'vpls', tokens[1:]):
return False
for peer in peers:
for change in scope[0]['announce']:
changes.append((peer, change))
if action == 'withdraw':
for (peer, change) in changes:
change.nlri.action = OUT.WITHDRAW
return changes
def api_vpls (self, command, peers, action):
tokens = formated(command).split(' ')[1:]
if len(tokens) < 4:
return False
if tokens[0] != 'vpls':
return False
changes = []
if 'self' in command:
for peer,nexthop in peers.iteritems():
scope = [{}]
self._nexthopself = nexthop
if not self.l2vpn.vpls(scope,'l2vpn','vpls',tokens[1:]):
self._nexthopself = None
return False
for change in scope[0]['announce']:
changes.append((peer,change))
self._nexthopself = None
else:
scope = [{}]
if not self.l2vpn.vpls(scope,'l2vpn','vpls',tokens[1:]):
return False
for peer in peers:
for change in scope[0]['announce']:
changes.append((peer,change))
if action == 'withdraw':
for (peer,change) in changes:
change.nlri.action = OUT.WITHDRAW
return changes
def api_refresh (self, command):
tokens = formated(command).split(' ')[2:]
if len(tokens) != 2:
return False
afi = AFI.value(tokens.pop(0))
safi = SAFI.value(tokens.pop(0))
if afi is None or safi is None:
return False
return RouteRefresh(afi,safi)
def api_refresh(self, command):
tokens = formated(command).split(' ')[2:]
if len(tokens) != 2:
return False
afi = AFI.value(tokens.pop(0))
safi = SAFI.value(tokens.pop(0))
if afi is None or safi is None:
return False
return RouteRefresh(afi, safi)
def api_flow (self, command, action):
tokens = formated(command).split(' ',2)[2].replace('\\n','\n').replace('{','{\n').replace('}','}\n').replace(';',';\n').replace('\n\n','\n')
self.tokens.set_text(tokens)
scope = [{}]
if not self._dispatch(scope,'root','flow',['route',],[],['root']):
return False
if not self.flow.check_flow(scope,self):
return False
changes = scope[0]['announce']
if action == 'withdraw':
for change in changes:
change.nlri.action = OUT.WITHDRAW
return changes
def api_operational (self, command):
tokens = formated(command).split(' ',3)
if len(tokens) != 4:
return False
operational = tokens[1].lower()
what = tokens[2].lower()
if operational != 'operational':
return False
# None or a class
return self.operational.operational(what,tokens[3])
def received(self):
consumed_data = False
for process in list(self._process):
try:
proc = self._process[process]
# proc.poll returns None if the process is still fine
# -[signal], like -15, if the process was terminated
if proc.poll() is not None and self.reactor.respawn:
raise ValueError('child died')
r, _, _ = select.select([
proc.stdout,
], [], [], 0)
if r:
try:
while True:
# Calling next() on Linux and OSX works perfectly well
# but not on OpenBSD where it always raise StopIteration
# and only readline() works
raw = proc.stdout.readline()
line = raw.rstrip()
consumed_data = True
self.logger.processes(
"Command from process %s : %s " %
(process, line))
if raw == '':
raise IOError('Child process died')
yield (process, formated(line))
except IOError, exc:
if not exc.errno or exc.errno in error.fatal:
# if the program exists we can get an IOError with errno code zero !
self.logger.processes(
"Issue with the process, terminating it and restarting it"
)
self._terminate(process)
self._start(process)
elif exc.errno in error.block:
# we often see errno.EINTR: call interrupted and
# we most likely have data, we will try to read them a the next loop iteration
pass
else:
self.logger.processes(
"unexpected errno received from forked process (%s)"
% errstr(exc))
except StopIteration:
if not consumed_data:
self.logger.processes(
"The process died, trying to respawn it")
self._terminate(process)
self._start(process)
def api_operational(self, command):
tokens = formated(command).split(' ', 3)
if len(tokens) != 4:
return False
operational = tokens[1].lower()
what = tokens[2].lower()
if operational != 'operational':
return False
# None or a class
return self.operational.operational(what, tokens[3])
def api_flow(self, command, action):
tokens = formated(command).split(' ', 2)[2].replace(
'\\n', '\n').replace('{', '{\n').replace('}', '}\n').replace(
';', ';\n').replace('\n\n', '\n')
self.tokens.set_text(tokens)
scope = [{}]
if not self._dispatch(scope, 'root', 'flow', [
'route',
], [], ['root']):
return False
if not self.flow.check_flow(scope, self):
return False
changes = scope[0]['announce']
if action == 'withdraw':
for change in changes:
change.nlri.action = OUT.WITHDRAW
return changes
def api_eor (self, command):
tokens = formated(command).split(' ')[2:]
number = len(tokens)
if not number:
return Family(1,1)
if number != 2:
return False
afi = AFI.fromString(tokens[0])
if afi == AFI.undefined:
return False
safi = SAFI.fromString(tokens[1])
if safi == SAFI.undefined:
return False
return Family(afi,safi)
def api_eor(self, command):
tokens = formated(command).split(' ')[2:]
number = len(tokens)
if not number:
return Family(1, 1)
if number != 2:
return False
afi = AFI.fromString(tokens[0])
if afi == AFI.undefined:
return False
safi = SAFI.fromString(tokens[1])
if safi == SAFI.undefined:
return False
return Family(afi, safi)
def _tokenise(self, iterator):
for line in iterator:
replaced = formated(line)
if not replaced:
continue
if replaced.startswith('#'):
continue
command = replaced[:3]
if command in ('md5', 'asm'):
string = line.strip()[3:].strip()
if string[-1] == ';':
string = string[:-1]
yield [command, string, ';']
elif replaced[:3] == 'run':
yield [t for t in replaced[:-1].split(' ', 1) if t
] + [replaced[-1]]
else:
yield [t.lower() for t in replaced[:-1].split(' ') if t
] + [replaced[-1]]
def received (self):
consumed_data = False
for process in list(self._process):
try:
proc = self._process[process]
# proc.poll returns None if the process is still fine
# -[signal], like -15, if the process was terminated
if proc.poll() is not None and self.reactor.respawn:
raise ValueError('child died')
r,_,_ = select.select([proc.stdout,],[],[],0)
if r:
try:
while True:
# Calling next() on Linux and OSX works perfectly well
# but not on OpenBSD where it always raise StopIteration
# and only readline() works
raw = proc.stdout.readline()
line = raw.rstrip()
consumed_data = True
self.logger.processes("Command from process %s : %s " % (process,line))
if raw == '':
raise IOError('Child process died')
yield (process,formated(line))
except IOError,exc:
if not exc.errno or exc.errno in error.fatal:
# if the program exists we can get an IOError with errno code zero !
self.logger.processes("Issue with the process, terminating it and restarting it")
self._terminate(process)
self._start(process)
elif exc.errno in error.block:
# we often see errno.EINTR: call interrupted and
# we most likely have data, we will try to read them a the next loop iteration
pass
else:
self.logger.processes("unexpected errno received from forked process (%s)" % errstr(exc))
except StopIteration:
if not consumed_data:
self.logger.processes("The process died, trying to respawn it")
self._terminate(process)
self._start(process)
def api_route(self, command, peers, action):
tokens = formated(command).split(' ')[1:]
number = len(tokens)
if number < 1:
return False
message = tokens[0]
if message not in ('route', ):
return False
if number == 2 and action == 'withdraw' and 'next-hop' not in tokens:
tokens.extend(['next-hop', '0.0.0.0'])
changes = []
if 'self' in command:
for peer, nexthop in peers.iteritems():
scope = [{}]
self.route.nexthop(nexthop)
if not self.route.static(scope, 'static', 'route', tokens[1:]):
self.route.clear()
return False
for change in scope[0]['announce']:
changes.append((peer, change))
self.route.clear()
else:
scope = [{}]
if not self.route.static(scope, 'static', 'route', tokens[1:]):
return False
for peer in peers:
for change in scope[0]['announce']:
changes.append((peer, change))
if action == 'withdraw':
for (peer, change) in changes:
change.nlri.action = OUT.WITHDRAW
return changes
def api_route (self, command, peers, action):
tokens = formated(command).split(' ')[1:]
number = len(tokens)
if number < 1:
return False
message = tokens[0]
if message not in ('route',):
return False
if number == 2 and action == 'withdraw' and 'next-hop' not in tokens:
tokens.extend(['next-hop','0.0.0.0'])
changes = []
if 'self' in command:
for peer,nexthop in peers.iteritems():
scope = [{}]
self.route.nexthop(nexthop)
if not self.route.static(scope,'static','route',tokens[1:]):
self.route.clear()
return False
for change in scope[0]['announce']:
changes.append((peer,change))
self.route.clear()
else:
scope = [{}]
if not self.route.static(scope,'static','route',tokens[1:]):
return False
for peer in peers:
for change in scope[0]['announce']:
changes.append((peer,change))
if action == 'withdraw':
for (peer,change) in changes:
change.nlri.action = OUT.WITHDRAW
return changes
def _operational(self, klass, parameters, tokens):
def utf8(string):
return string.encode('utf-8')[1:-1]
convert = {
'afi': AFI.value,
'safi': SAFI.value,
'sequence': int,
'counter': long,
'advisory': utf8
}
def valid(_):
return True
def u32(_):
return int(_) <= 0xFFFFFFFF
def u64(_):
return long(_) <= 0xFFFFFFFFFFFFFFFF
def advisory(_):
return len(_.encode('utf-8')) <= MAX_ADVISORY + 2 # the two quotes
validate = {
'afi': AFI.value,
'safi': SAFI.value,
'sequence': u32,
'counter': u64,
}
number = len(parameters) * 2
tokens = formated(tokens).split(' ', number - 1)
if len(tokens) != number:
return self.error.set(
'invalid operational syntax, wrong number of arguments')
data = {}
while tokens and parameters:
command = tokens.pop(0).lower()
value = tokens.pop(0)
if command == 'router-id':
if isipv4(value):
data['routerid'] = RouterID(value)
else:
self.error.set('invalid operational value for %s' %
command)
return None
continue
expected = parameters.pop(0)
if command != expected:
self.error.set(
'invalid operational syntax, unknown argument %s' %
command)
return None
if not validate.get(command, valid)(value):
self.error.set('invalid operational value for %s' % command)
return None
data[command] = convert[command](value)
if tokens or parameters:
self.error.set('invalid advisory syntax, missing argument(s) %s' %
', '.join(parameters))
return None
if 'routerid' not in data:
data['routerid'] = None
return klass(**data)
def _operational (self, klass, parameters, tokens):
def utf8 (string): return string.encode('utf-8')[1:-1]
convert = {
'afi': AFI.value,
'safi': SAFI.value,
'sequence': int,
'counter': long,
'advisory': utf8
}
def valid (_):
return True
def u32 (_):
return int(_) <= 0xFFFFFFFF
def u64 (_):
return long(_) <= 0xFFFFFFFFFFFFFFFF
def advisory (_):
return len(_.encode('utf-8')) <= MAX_ADVISORY + 2 # the two quotes
validate = {
'afi': AFI.value,
'safi': SAFI.value,
'sequence': u32,
'counter': u64,
}
number = len(parameters)*2
tokens = formated(tokens).split(' ',number-1)
if len(tokens) != number:
return self.error.set('invalid operational syntax, wrong number of arguments')
data = {}
while tokens and parameters:
command = tokens.pop(0).lower()
value = tokens.pop(0)
if command == 'router-id':
if isipv4(value):
data['routerid'] = RouterID(value)
else:
self.error.set('invalid operational value for %s' % command)
return None
continue
expected = parameters.pop(0)
if command != expected:
self.error.set('invalid operational syntax, unknown argument %s' % command)
return None
if not validate.get(command,valid)(value):
self.error.set('invalid operational value for %s' % command)
return None
data[command] = convert[command](value)
if tokens or parameters:
self.error.set('invalid advisory syntax, missing argument(s) %s' % ', '.join(parameters))
return None
if 'routerid' not in data:
data['routerid'] = None
return klass(**data)