def reload(self):
"""Reload the configuration and send to the peer the route which changed"""
log.notice('performing reload of exabgp %s' % version, 'configuration')
reloaded = self.configuration.reload()
if not reloaded:
#
# Careful the string below is used but the QA code to check for sucess of failure
log.error('not reloaded, no change found in the configuration',
'configuration')
# Careful the string above is used but the QA code to check for sucess of failure
#
log.error(str(self.configuration.error), 'configuration')
return False
for key, peer in self._peers.items():
if key not in self.configuration.neighbors:
log.debug('removing peer: %s' % peer.neighbor.name(),
'reactor')
peer.remove()
for key, neighbor in self.configuration.neighbors.items():
# new peer
if key not in self._peers:
log.debug('new peer: %s' % neighbor.name(), 'reactor')
peer = Peer(neighbor, self)
self._peers[key] = peer
# modified peer
elif self._peers[key].neighbor != neighbor:
log.debug(
'peer definition change, establishing a new connection for %s'
% str(key), 'reactor')
self._peers[key].reestablish(neighbor)
# same peer but perhaps not the routes
else:
# finding what route changed and sending the delta is not obvious
log.debug(
'peer definition identical, updating peer routes if required for %s'
% str(key), 'reactor')
self._peers[key].reconfigure(neighbor)
for ip in self._ips:
if ip.afi == neighbor.peer_address.afi:
self.listener.listen_on(ip, neighbor.peer_address,
self._port, neighbor.md5_password,
neighbor.md5_base64, None)
log.notice('loaded new configuration successfully', 'reactor')
return True
def restart(self):
"""Kill the BGP session and restart it"""
log.notice('performing restart of exabgp %s' % version, 'reactor')
# XXX: FIXME: Could return False, in case there is interference with old config...
reloaded = self.configuration.reload()
for key in self._peers.keys():
if key not in self.configuration.neighbors.keys():
peer = self._peers[key]
log.debug('removing peer %s' % peer.neighbor.name(), 'reactor')
self._peers[key].remove()
else:
self._peers[key].reestablish()
self.processes.start(self.configuration.processes, True)
def cmdline(cmdarg):
env = getenv()
# Must be done before setting the logger as it modify its behaviour
if cmdarg.verbose:
env.log.all = True
env.log.level = syslog.LOG_DEBUG
log.init()
if cmdarg.pdb:
env.debug.pdb = True
if cmdarg.verbose:
env.log.parser = True
for configuration in cmdarg.configuration:
log.notice(f'loading {configuration}', 'configuration')
location = getconf(configuration)
if not location:
log.critical(f'{configuration} is not an exabgp config file',
'configuration')
sys.exit(1)
config = Reactor([location]).configuration
if not config.reload():
log.critical(f'{configuration} is not a valid config file',
'configuration')
sys.exit(1)
log.info(f'\u2713 loading', 'configuration')
if cmdarg.neighbor:
log.notice(f'checking neighbors', 'configuration')
for name, neighbor in config.neighbors.items():
reparsed = neighbor.string()
for line in reparsed.split('\n'):
log.debug(line, configuration)
log.info(f'\u2713 neighbor {name.split()[1]}',
'configuration')
if cmdarg.route:
log.notice(f'checking routes', 'configuration')
if not check_generation(config.neighbors):
log.critical(f'{configuration} has an invalid route',
'configuration')
sys.exit(1)
log.info(f'\u2713 routes', 'configuration')
def _main(self):
"""yield True if we want to come back to it asap, None if nothing urgent, and False if stopped"""
if self._teardown:
raise Notify(6, 3)
self.neighbor.rib.incoming.clear()
include_withdraw = False
# Announce to the process BGP is up
log.notice(
'connected to %s with %s' %
(self.id(), self.proto.connection.name()), 'reactor')
self.stats['up'] = self.stats.get('up', 0) + 1
if self.neighbor.api['neighbor-changes']:
try:
self.reactor.processes.up(self.neighbor)
except ProcessError:
# Can not find any better error code than 6,0 !
# XXX: We can not restart the program so this will come back again and again - FIX
# XXX: In the main loop we do exit on this kind of error
raise Notify(6, 0, 'ExaBGP Internal error, sorry.')
send_eor = not self.neighbor.manual_eor
new_routes = None
self._resend_routes = SEND.NORMAL
send_families = []
# Every last asm message should be re-announced on restart
for family in self.neighbor.asm:
if family in self.neighbor.families():
self.neighbor.messages.appendleft(self.neighbor.asm[family])
operational = None
refresh = None
command_eor = None
number = 0
refresh_enhanced = True if self.proto.negotiated.refresh == REFRESH.ENHANCED else False
send_ka = KA(self.proto.connection.session, self.proto)
while not self._teardown:
for message in self.proto.read_message():
self.recv_timer.check_ka(message)
if send_ka() is not False:
# we need and will send a keepalive
while send_ka() is None:
yield ACTION.NOW
# Received update
if message.TYPE == Update.TYPE:
number += 1
log.debug('<< UPDATE #%d' % number, self.id())
for nlri in message.nlris:
self.neighbor.rib.incoming.update_cache(
Change(nlri, message.attributes))
log.debug(
LazyFormat(' UPDATE #%d nlri ' % number, nlri,
str), self.id())
elif message.TYPE == RouteRefresh.TYPE:
if message.reserved == RouteRefresh.request:
self._resend_routes = SEND.REFRESH
send_families.append((message.afi, message.safi))
# SEND OPERATIONAL
if self.neighbor.operational:
if not operational:
new_operational = self.neighbor.messages.popleft(
) if self.neighbor.messages else None
if new_operational:
operational = self.proto.new_operational(
new_operational, self.proto.negotiated)
if operational:
try:
next(operational)
except StopIteration:
operational = None
# make sure that if some operational message are received via the API
# that we do not eat memory for nothing
elif self.neighbor.messages:
self.neighbor.messages.popleft()
# SEND REFRESH
if self.neighbor.route_refresh:
if not refresh:
new_refresh = self.neighbor.refresh.popleft(
) if self.neighbor.refresh else None
if new_refresh:
refresh = self.proto.new_refresh(new_refresh)
if refresh:
try:
next(refresh)
except StopIteration:
refresh = None
# Take the routes already sent to that peer and resend them
if self._reconfigure:
self._reconfigure = False
# we are here following a configuration change
if self._neighbor:
# see what changed in the configuration
self.neighbor.rib.outgoing.replace(
self._neighbor.backup_changes,
self._neighbor.changes)
# do not keep the previous routes in memory as they are not useful anymore
self._neighbor.backup_changes = []
# Take the routes already sent to that peer and resend them
if self._resend_routes != SEND.DONE:
enhanced = True if refresh_enhanced and self._resend_routes == SEND.REFRESH else False
self._resend_routes = SEND.DONE
self.neighbor.rib.outgoing.resend(send_families, enhanced)
send_families = []
# Need to send update
if not new_routes and self.neighbor.rib.outgoing.pending():
# XXX: in proto really. hum to think about ?
new_routes = self.proto.new_update(include_withdraw)
if new_routes:
count = 1 if self.neighbor.rate_limit > 0 else 25
try:
for _ in range(count):
# This can raise a NetworkError
next(new_routes)
except StopIteration:
new_routes = None
include_withdraw = True
elif send_eor:
send_eor = False
for _ in self.proto.new_eors():
yield ACTION.NOW
log.debug('>> EOR(s)', self.id())
# SEND MANUAL KEEPALIVE (only if we have no more routes to send)
elif not command_eor and self.neighbor.eor:
new_eor = self.neighbor.eor.popleft()
command_eor = self.proto.new_eors(new_eor.afi,
new_eor.safi)
if command_eor:
try:
next(command_eor)
except StopIteration:
command_eor = None
if new_routes or message.TYPE != NOP.TYPE:
yield ACTION.NOW
elif self.neighbor.messages or operational:
yield ACTION.NOW
elif self.neighbor.eor or command_eor:
yield ACTION.NOW
else:
yield ACTION.LATER
# read_message will loop until new message arrives with NOP
if self._teardown:
break
# If graceful restart, silent shutdown
if self.neighbor.graceful_restart and self.proto.negotiated.sent_open.capabilities.announced(
Capability.CODE.GRACEFUL_RESTART):
log.error('closing the session without notification', self.id())
self.proto.close(
'graceful restarted negotiated, closing without sending any notification'
)
raise NetworkError('closing')
# notify our peer of the shutdown
raise Notify(6, self._teardown)
def run(comment, configurations, validate, pid=0):
env = getenv()
log.notice('Thank you for using ExaBGP', 'welcome')
log.notice('%s' % version, 'version')
log.notice('%s' % sys.version.replace('\n', ' '), 'interpreter')
log.notice('%s' % ' '.join(platform.uname()[:5]), 'os')
log.notice('%s' % ROOT, 'installation')
if comment:
log.notice(comment, 'advice')
warning = warn()
if warning:
log.warning(warning, 'advice')
if env.api.cli:
pipename = 'exabgp' if env.api.pipename is None else env.api.pipename
pipes = named_pipe(ROOT, pipename)
if len(pipes) != 1:
env.api.cli = False
log.error(
'could not find the named pipes (%s.in and %s.out) required for the cli' % (pipename, pipename), 'cli'
)
log.error('we scanned the following folders (the number is your PID):', 'cli')
for location in pipes:
log.error(' - %s' % location, 'cli control')
log.error('please make them in one of the folder with the following commands:', 'cli control')
log.error('> mkfifo %s/run/%s.{in,out}' % (os.getcwd(), pipename), 'cli control')
log.error('> chmod 600 %s/run/%s.{in,out}' % (os.getcwd(), pipename), 'cli control')
if os.getuid() != 0:
log.error(
'> chown %d:%d %s/run/%s.{in,out}' % (os.getuid(), os.getgid(), os.getcwd(), pipename),
'cli control',
)
else:
pipe = pipes[0]
os.environ['exabgp_cli_pipe'] = pipe
os.environ['exabgp_api_pipename'] = pipename
log.info('named pipes for the cli are:', 'cli control')
log.info('to send commands %s%s.in' % (pipe, pipename), 'cli control')
log.info('to read responses %s%s.out' % (pipe, pipename), 'cli control')
if not env.profile.enable:
exit_code = Reactor(configurations).run(validate, ROOT)
__exit(env.debug.memory, exit_code)
try:
import cProfile as profile
except ImportError:
import profile
if env.profile.file == 'stdout':
profiled = 'Reactor(%s).run(%s,"%s")' % (str(configurations), str(validate), str(ROOT))
exit_code = profile.run(profiled)
__exit(env.debug.memory, exit_code)
if pid:
profile_name = "%s-pid-%d" % (env.profile.file, pid)
else:
profile_name = env.profile.file
notice = ''
if os.path.isdir(profile_name):
notice = 'profile can not use this filename as output, it is not a directory (%s)' % profile_name
if os.path.exists(profile_name):
notice = 'profile can not use this filename as output, it already exists (%s)' % profile_name
if not notice:
cwd = os.getcwd()
log.debug('profiling ....', 'reactor')
profiler = profile.Profile()
profiler.enable()
try:
exit_code = Reactor(configurations).run(validate, ROOT)
except Exception:
exit_code = Reactor.Exit.unknown
raise
finally:
from exabgp.vendoring import lsprofcalltree
profiler.disable()
kprofile = lsprofcalltree.KCacheGrind(profiler)
try:
destination = profile_name if profile_name.startswith('/') else os.path.join(cwd, profile_name)
with open(destination, 'w+') as write:
kprofile.output(write)
except IOError:
notice = 'could not save profiling in formation at: ' + destination
log.debug("-" * len(notice), 'reactor')
log.debug(notice, 'reactor')
log.debug("-" * len(notice), 'reactor')
__exit(env.debug.memory, exit_code)
else:
log.debug("-" * len(notice), 'reactor')
log.debug(notice, 'reactor')
log.debug("-" * len(notice), 'reactor')
Reactor(configurations).run(validate, ROOT)
__exit(env.debug.memory, 1)
def log_message(self, message, level='INFO'):
log.notice(message, 'api', level)