def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.jitter.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Jitter', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Jitter')
self.activateJitter = settings.BooleanSetting().getFromValue('Activate Jitter', self, True)
self.jitterOverPerimeterWidth = settings.FloatSpin().getFromValue(1.0, 'Jitter Over Perimeter Width (ratio):', self, 3.0, 2.0)
self.executeTitle = 'Jitter'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge_application.skeinforge_plugins.craft_plugins.home.html', '', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Home', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_home')
self.activateHome = settings.BooleanSetting().getFromValue('Activate Home', self, True )
self.nameOfHomingFile = settings.StringSetting().getFromValue('Name of Homing File:', self, 'homing.gcode')
self.executeTitle = 'Home'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.drill.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Drill', self, '')
self.activateDrill = settings.BooleanSetting().getFromValue('Activate Drill', self, True )
self.drillingMarginOnBottom = settings.FloatSpin().getFromValue( 0.0, 'Drilling Margin on Bottom (millimeters):', self, 5.0, 1.0 )
self.drillingMarginOnTop = settings.FloatSpin().getFromValue( 0.0, 'Drilling Margin on Top (millimeters):', self, 20.0, 3.0 )
self.executeTitle = 'Drill'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.limit.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Limit', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Limit')
self.activateLimit = settings.BooleanSetting().getFromValue('Activate Limit', self, False)
self.maximumInitialFeedRate = settings.FloatSpin().getFromValue(0.5, 'Maximum Initial Feed Rate (mm/s):', self, 10.0, 1.0)
self.executeTitle = 'Limit'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.speed.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Speed', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Speed')
self.activateSpeed = settings.BooleanSetting().getFromValue(
'Activate Speed:', self, True)
self.addFlowRate = settings.BooleanSetting().getFromValue(
'Add Flow Rate:', self, True)
self.addAccelerationRate = settings.BooleanSetting().getFromValue(
'Add Acceleration Rate:', self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Main Feedrate Settings -', self)
self.feedRatePerSecond = settings.FloatSpin().getFromValue(
20, 'Main Feed Rate (mm/s):', self, 140, 60)
self.flowRateSetting = settings.FloatSpin().getFromValue(
0.5, 'Main Flow Rate (scaler):', self, 1.5, 1.0)
self.AccelerationRateSetting = settings.FloatSpin().getFromValue(
500, 'Main Acceleration Rate for Extruder (mm/s2):', self, 10000,
1300)
self.orbitalFeedRateOverOperatingFeedRate = settings.FloatSpin(
).getFromValue(0.1, 'Feed Rate ratio for Orbiting move (ratio):', self,
0.9, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter Printing -', self)
self.perimeterFeedRateOverOperatingFeedRate = settings.FloatSpin(
).getFromValue(20, 'Perimeter Feed Rate (mm/s):', self, 80, 30)
self.perimeterFlowRateOverOperatingFlowRate = settings.FloatSpin(
).getFromValue(0.5, 'Perimeter Flow Rate (scaler):', self, 1.5, 1.0)
self.perimeterAccelerationRate = settings.FloatSpin().getFromValue(
5, 'Perimeter Acceleration Rate for Extruder (mm/s2):', self,
10000, 50)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Bridge Layers -', self)
self.bridgeFeedRateMultiplier = settings.FloatSpin().getFromValue(
0.5, 'Bridge Feed Rate (ratio to Perim.feed):', self, 1.5, 1.0)
self.bridgeFlowRateMultiplier = settings.FloatSpin().getFromValue(
0.5, 'Bridge Flow Rate (scaler):', self, 1.3, 1.0)
self.bridgeAccelerationRate = settings.FloatSpin().getFromValue(
10, 'Bridge Acceleration Rate for Extruder(mm/s2):', self, 10000,
1000)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter -', self)
settings.LabelSeparator().getFromRepository(self)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue(
40, 'Travel Feed Rate (mm/s):', self, 300, 130)
settings.LabelDisplay().getFromName(
'- Duty Cyle for DC extruders only -', self)
self.dutyCycleAtBeginning = settings.FloatSpin().getFromValue(
0.0, 'Duty Cyle at Beginning (portion):', self, 1.0, 1.0)
self.dutyCycleAtEnding = settings.FloatSpin().getFromValue(
0.0, 'Duty Cyle at Ending (portion):', self, 1.0, 0.0)
self.executeTitle = 'Speed'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.dcflow.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Dcflow', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Dcflow')
self.activateDcflow = settings.BooleanSetting().getFromValue(
'Activate Dcflow', self, False)
self.activateDCExtruderFlowScale = settings.BooleanSetting(
).getFromValue('Activate DC Extruder Flow scaling (DC Extruders)',
self, True)
settings.LabelSeparator().getFromRepository(self)
self.filamentDiameter = settings.FloatSpin().getFromValue(
1.5, 'Filament Diameter (mm):', self, 3.5, 2.8)
self.filamentPackingDensity = settings.FloatSpin().getFromValue(
0.7, 'Extruder Flow Correction (ratio) lower=more extrusion:',
self, 1.0, 1.00)
self.activateCalibration = settings.BooleanSetting().getFromValue(
'Are You Calibrating?', self, False)
self.MeasuredXSection = settings.FloatSpin().getFromValue(
0.20, 'Measured Width of Extrusion:', self, 2.0, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Fighting Oooze -', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Filament Retraction Settings -',
self)
self.retractionDistance = settings.FloatSpin().getFromValue(
0.00, 'Retraction Distance (millimeters):', self, 3.00, 1.00)
self.restartExtraDistance = settings.FloatSpin().getFromValue(
-0.50, 'Restart Extra Distance (millimeters):', self, 0.50, 0.00)
self.extruderRetractionSpeed = settings.FloatSpin().getFromValue(
5.0, 'Extruder Retraction Speed (mm/s):', self, 50.0, 15.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- When to retract ? -', self)
self.retractWhenCrossing = settings.BooleanSetting().getFromValue(
'Force to retract when crossing over spaces', self, True)
self.minimumExtrusionForRetraction = settings.FloatSpin().getFromValue(
0.0, 'Minimum Extrusion before Retraction (millimeters):', self,
2.0, 1.0)
self.minimumTravelForRetraction = settings.FloatSpin().getFromValue(
0.0, 'Minimum Travelmove after Retraction (millimeters):', self,
2.0, 1.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Firmware Related Stuff -', self)
extrusionDistanceFormatLatentStringVar = settings.LatentStringVar()
self.extrusionDistanceFormatChoiceLabel = settings.LabelDisplay(
).getFromName('Extrusion Values should be: ', self)
settings.Radio().getFromRadio(extrusionDistanceFormatLatentStringVar,
'in Absolute units', self, True)
self.relativeExtrusionDistance = settings.Radio().getFromRadio(
extrusionDistanceFormatLatentStringVar, 'in Relative units', self,
False)
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Dcflow'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.synopsis.html', self )
self.activateSynopsis = settings.BooleanSetting().getFromValue('Activate Synopsis', self, False )
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File to Write Synopsis for', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Synopsis')
self.exportProfileAsCSVFile = settings.BooleanSetting().getFromValue('Export Profile As CSV File', self, True)
self.exportProfileAsZipFile = settings.BooleanSetting().getFromValue('Export Profile As Zip File', self, False)
self.executeTitle = 'Synopsis'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.smooth.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Smooth', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Smooth')
self.activateSmooth = settings.BooleanSetting().getFromValue('Activate Smooth', self, False)
self.layersFrom = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers From (index):', self, 912345678, 1)
self.maximumShorteningOverWidth = settings.FloatSpin().getFromValue(0.2, 'Maximum Shortening over Width (float):', self, 2.0, 1.2)
self.executeTitle = 'Smooth'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.feed.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Feed', self, '')
self.activateFeed = settings.BooleanSetting().getFromValue('Activate Feed', self, True)
self.feedRatePerSecond = settings.FloatSpin().getFromValue(2.0, 'Feed Rate (mm/s):', self, 50.0, 16.0)
self.maximumZDrillFeedRatePerSecond = settings.FloatSpin().getFromValue(0.02, 'Maximum Z Drill Feed Rate (mm/s):', self, 0.5, 0.1)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue(2.0, 'Travel Feed Rate (mm/s):', self, 50.0, 16.0)
self.executeTitle = 'Feed'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.clip.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Clip', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Clip')
self.activateClip = settings.BooleanSetting().getFromValue('Activate Clip', self, False)
self.clipOverEdgeWidth = settings.FloatSpin().getFromValue(0.1, 'Clip Over Perimeter Width (ratio):', self, 0.8, 0.5)
self.maximumConnectionDistanceOverEdgeWidth = settings.FloatSpin().getFromValue( 1.0, 'Maximum Connection Distance Over Perimeter Width (ratio):', self, 20.0, 10.0)
self.executeTitle = 'Clip'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.lash.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Lash', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Lash')
self.activateLash = settings.BooleanSetting().getFromValue('Activate Lash if you have backlash in your axes', self, False )
self.xBacklash = settings.FloatSpin().getFromValue( 0.1, 'X Backlash (mm):', self, 0.5, 0.2 )
self.yBacklash = settings.FloatSpin().getFromValue( 0.1, 'Y Backlash (mm):', self, 0.5, 0.3 )
self.executeTitle = 'Lash'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html', self)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html')
self.activateClairvoyance = settings.BooleanSetting().getFromValue('Activate Clairvoyance', self, False)
settings.LabelSeparator().getFromRepository(self)
self.fileNameInput = settings.FileNameInput().getFromFileName([('Gcode text files', '*.gcode')], 'Open File to Generate Clairvoyances for', self, '')
self.gcodeProgram = settings.StringSetting().getFromValue('Gcode Program:', self, 'webbrowser')
self.executeTitle = 'Clairvoyance'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.interpret.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Interpret', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Interpret')
self.activateInterpret = settings.BooleanSetting().getFromValue('Activate Interpret', self, False )
self.printInterpretion = settings.BooleanSetting().getFromValue('Print Interpretion', self, False )
self.textProgram = settings.StringSetting().getFromValue('Text Program:', self, 'webbrowser')
self.executeTitle = 'Interpret'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge_application.skeinforge_plugins.craft_plugins.unpause.html', None, self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Unpause', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Unpause')
self.activateUnpause = settings.BooleanSetting().getFromValue('Activate Unpause', self, False )
self.delay = settings.FloatSpin().getFromValue( 2.0, 'Delay (milliseconds):', self, 42.0, 28.0 )
self.maximumSpeed = settings.FloatSpin().getFromValue( 1.1, 'Maximum Speed (ratio):', self, 1.9, 1.3 )
self.executeTitle = 'Unpause'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_utilities.skeinforge_craft.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Craft', self, '')
self.importantFileNames = ['carve', 'chop', 'feed', 'flow', 'lift', 'raft', 'speed']
allCraftNames = archive.getPluginFileNamesFromDirectoryPath(getPluginsDirectoryPath())
self.radioPlugins = settings.getRadioPluginsAddPluginFrame(getPluginsDirectoryPath(), self.importantFileNames, allCraftNames, self)
CraftRadioButtonsSaveListener().getFromRadioPlugins(self.radioPlugins, self)
self.executeTitle = 'Craft'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.hop.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Hop', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Hop')
self.activateHop = settings.BooleanSetting().getFromValue('Activate Hop', self, False )
self.hopOverLayerThickness = settings.FloatSpin().getFromValue( 0.5, 'Hop Over Layer Thickness (ratio):', self, 1.5, 1.0 )
self.minimumHopAngle = settings.FloatSpin().getFromValue( 20.0, 'Minimum Hop Angle (degrees):', self, 60.0, 30.0 )
self.executeTitle = 'Hop'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.cool.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue(
'Activate Cool', self, True)
settings.LabelDisplay().getFromName(
'- Fan settings (priority: top-down) -', self)
self.fanmaxPWM = settings.IntSpin().getFromValue(
0, 'Full Fan Speed (0 - 255):', self, 255, 200)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue(
'Turn Fan On at Beginning', self, True)
self.fanFirstLayer = settings.IntSpin().getFromValue(
0, 'Do Not Use Fan Before Layer (integer):', self, 100, 5)
self.bridgeFan = settings.BooleanSetting().getFromValue(
'Force Fan on Bridge Layers', self, False)
self.maximumFanLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Maximum Layer Time for Fan use (seconds):', self, 240.0,
40.0)
self.fullFanLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Full Fan Speed Bellow Layer Time (seconds):', self, 240.0,
20.0)
settings.LabelSeparator().getFromRepository(self)
self.coolType = settings.MenuButtonDisplay().getFromName(
'Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(
self.coolType, 'Orbit', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(
self.coolType, 'Slow Down', self, True)
self.maximumCool = settings.FloatSpin().getFromValue(
0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Minimum Layer Time (seconds):', self, 120.0, 60.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -',
self)
self.nameOfCoolEndFile = settings.StringSetting().getFromValue(
'Name of Cool End File:', self, 'cool_end.gcode')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue(
'Name of Cool Start File:', self, 'cool_start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.bridgeCool = settings.FloatSpin().getFromValue(
0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.orbitalOutset = settings.FloatSpin().getFromValue(
1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue(
'Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.chamber.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Chamber', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Chamber')
self.activateChamber = settings.BooleanSetting().getFromValue('Activate Chamber:', self, True )
self.bedTemperature = settings.FloatSpin().getFromValue( 20.0, 'Bed Temperature (Celcius):', self, 90.0, 60.0 )
self.chamberTemperature = settings.FloatSpin().getFromValue( 20.0, 'Chamber Temperature (Celcius):', self, 90.0, 30.0 )
self.holdingForce = settings.FloatSpin().getFromValue( 0.0, 'Holding Force (bar):', self, 100.0, 0.0 )
self.executeTitle = 'Chamber'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.widen.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Widen', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Widen')
self.activateWiden = settings.BooleanSetting().getFromValue('Activate Widen', self, False)
self.widenWidthOverEdgeWidth = settings.IntSpin().getFromValue(2, 'Widen Width over Edge Width (ratio):', self, 4, 2)
self.executeTitle = 'Widen'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge.skeinforge_tools.craft_plugins.outset.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Outset', self, '')
self.activateOutset = settings.BooleanSetting().getFromValue(
'Activate Outset:', self, True)
self.executeTitle = 'Outset'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.clip.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Clip', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Clip')
self.activateClip = settings.BooleanSetting().getFromValue('Activate Clip..to clip the extrusion that overlaps when printing edges', self, True )
settings.LabelSeparator().getFromRepository(self)
self.clipOverEdgeWidth = settings.FloatSpin().getFromValue( 0.1, 'Clip Over Perimeter Width adjuster (increase for bigger gap):', self, 1.0, 0.33 )
self.maximumConnectionDistanceOverEdgeWidth = settings.FloatSpin().getFromValue( 1.0, 'Threshold for connecting inner loops (ratio):', self, 50.0, 25.0 )
self.executeTitle = 'Clip'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.skirt.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Skirt', self, '')
self.activateSkirt = settings.BooleanSetting().getFromValue('Activate Skirt:', self, False)
self.gapOverPerimeterWidth = settings.FloatSpin().getFromValue(
0.5, 'Gap over Perimeter Width (ratio):', self, 2.0, 1.0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers To (index):', self, 912345678, 1)
self.executeTitle = 'Skirt'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.scale.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Scale', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Scale')
self.activateScale = settings.BooleanSetting().getFromValue('Activate Scale', self, False)
self.xyPlaneScale = settings.FloatSpin().getFromValue(0.99, 'XY Plane Scale (ratio):', self, 1.03, 1.01)
self.zAxisScale = settings.FloatSpin().getFromValue(0.99, 'Z Axis Scale (ratio):', self, 1.02, 1.0)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Scale'
def __init__( self ): "Set the default settings, execute title & settings fileName." settings.addListsToRepository( 'skeinforge.skeinforge_tools.analyze_plugins.statistic.html', '', self ) self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute( 'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Statistic' ) self.activateStatistic = settings.BooleanSetting().getFromValue( 'Activate Statistic', self, True ) self.extrusionDiameterOverThickness = settings.FloatSpin().getFromValue( 1.0, 'Extrusion Diameter over Thickness (ratio):', self, 1.5, 1.25 ) self.fileNameInput = settings.FileNameInput().getFromFileName( [ ( 'Gcode text files', '*.gcode' ) ], 'Open File to Generate Statistics for', self, '' ) self.printStatistics = settings.BooleanSetting().getFromValue( 'Print Statistics', self, True ) self.saveStatistics = settings.BooleanSetting().getFromValue( 'Save Statistics', self, False ) self.executeTitle = 'Generate Statistics'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.tower.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Tower', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Tower')
self.activateTower = settings.BooleanSetting().getFromValue('Activate Tower', self, False )
self.extruderPossibleCollisionConeAngle = settings.FloatSpin().getFromValue( 40.0, 'Extruder Possible Collision Cone Angle (degrees):', self, 80.0, 60.0 )
self.maximumTowerHeight = settings.IntSpin().getFromValue( 2, 'Maximum Tower Height (layers):', self, 10, 5 )
self.towerStartLayer = settings.IntSpin().getFromValue( 1, 'Tower Start Layer (integer):', self, 5, 1 )
self.executeTitle = 'Tower'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.skeiniso.html', self)
self.baseNameSynonym = 'behold.csv'
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File for Skeiniso', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skeiniso')
self.activateSkeiniso = settings.BooleanSetting().getFromValue('Activate Skeiniso', self, True )
self.addAnimation()
self.axisRulings = settings.BooleanSetting().getFromValue('Axis Rulings', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Banding -', self )
self.bandHeight = settings.IntSpinUpdate().getFromValue( 0, 'Band Height (layers):', self, 10, 5 )
self.bottomBandBrightness = settings.FloatSpinUpdate().getFromValue( 0.0, 'Bottom Band Brightness (ratio):', self, 1.0, 0.7 )
self.bottomLayerBrightness = settings.FloatSpinUpdate().getFromValue( 0.0, 'Bottom Layer Brightness (ratio):', self, 1.0, 1.0 )
self.brightBandStart = settings.MenuButtonDisplay().getFromName('Bright Band Start:', self )
self.fromTheBottom = settings.MenuRadio().getFromMenuButtonDisplay( self.brightBandStart, 'From the Bottom', self, False )
self.fromTheTop = settings.MenuRadio().getFromMenuButtonDisplay( self.brightBandStart, 'From the Top', self, True )
settings.LabelSeparator().getFromRepository(self)
self.drawArrows = settings.BooleanSetting().getFromValue('Draw Arrows', self, False )
self.goAroundExtruderOffTravel = settings.BooleanSetting().getFromValue('Go Around Extruder Off Travel', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layer = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Layer (index):', self, 912345678, 0 )
self.layerExtraSpan = settings.IntSpinUpdate().getSingleIncrementFromValue( - 912345678, 'Layer Extra Span (integer):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.line = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Line (index):', self, 912345678, 0 )
self.mouseMode = settings.MenuButtonDisplay().getFromName('Mouse Mode:', self )
self.displayLine = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'Display Line', self, True )
self.viewMove = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Move', self, False )
self.viewRotate = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Rotate', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Number of Fill Layers -', self )
self.numberOfFillBottomLayers = settings.IntSpinUpdate().getFromValue( 0, 'Number of Fill Bottom Layers (integer):', self, 5, 1 )
self.numberOfFillTopLayers = settings.IntSpinUpdate().getFromValue( 0, 'Number of Fill Top Layers (integer):', self, 5, 1 )
settings.LabelSeparator().getFromRepository(self)
self.addScaleScreenSlide()
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Viewpoint -', self )
self.viewpointLatitude = settings.FloatSpin().getFromValue( 0.0, 'Viewpoint Latitude (degrees):', self, 180.0, 15.0 )
self.viewpointLongitude = settings.FloatSpin().getFromValue( 0.0, 'Viewpoint Longitude (degrees):', self, 360.0, 210.0 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Width -', self )
self.widthOfAxisNegativeSide = settings.IntSpinUpdate().getFromValue( 0, 'Width of Axis Negative Side (pixels):', self, 10, 2 )
self.widthOfAxisPositiveSide = settings.IntSpinUpdate().getFromValue( 0, 'Width of Axis Positive Side (pixels):', self, 10, 6 )
self.widthOfFillBottomThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Fill Bottom Thread (pixels):', self, 10, 2 )
self.widthOfFillTopThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Fill Top Thread (pixels):', self, 10, 2 )
self.widthOfInfillThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Infill Thread (pixels):', self, 10, 1 )
self.widthOfLoopThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Loop Thread (pixels):', self, 10, 2 )
self.widthOfPerimeterInsideThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Perimeter Inside Thread (pixels):', self, 10, 8 )
self.widthOfPerimeterOutsideThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Perimeter Outside Thread (pixels):', self, 10, 8 )
self.widthOfRaftThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Raft Thread (pixels):', self, 10, 1 )
self.widthOfSelectionThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Selection Thread (pixels):', self, 10, 6 )
self.widthOfTravelThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Travel Thread (pixels):', self, 10, 0 )
self.executeTitle = 'Skeiniso'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository(
'skeinforge.skeinforge_tools.meta_plugins.interpret.html', '',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Interpret',
self, '')
self.printInterpretion = settings.BooleanSetting().getFromValue(
'Print Interpretion', self, False)
self.executeTitle = 'Interpret'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.skirt.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Skirt', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skirt')
self.activateSkirt = settings.BooleanSetting().getFromValue('Activate Skirt', self, False)
self.convex = settings.BooleanSetting().getFromValue('Convex:', self, True)
self.gapOverEdgeWidth = settings.FloatSpin().getFromValue(1.0, 'Gap over Perimeter Width (ratio):', self, 5.0, 3.0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers To (index):', self, 912345678, 1)
self.executeTitle = 'Skirt'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.dwindle.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Dwindle', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.craft_plugins.dwindle.html')
self.activateDwindle = settings.BooleanSetting().getFromValue('Activate Dwindle', self, False)
settings.LabelSeparator().getFromRepository(self)
self.endRateMultiplier = settings.FloatSpin().getFromValue(0.4, 'End Rate Multiplier (ratio):', self, 0.8, 0.5)
self.pentUpVolume = settings.FloatSpin().getFromValue(0.1, 'Pent Up Volume (cubic millimeters):', self, 1.0, 0.4)
self.slowdownSteps = settings.IntSpin().getFromValue(2, 'Slowdown Steps (positive integer):', self, 10, 3)
self.slowdownVolume = settings.FloatSpin().getFromValue(1.0, 'Slowdown Volume (cubic millimeters):', self, 10.0, 5.0)
self.executeTitle = 'Dwindle'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge.skeinforge_tools.craft_plugins.whittle.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File to be Whittled', self, '')
self.activateWhittle = settings.BooleanSetting().getFromValue(
'Activate Whittle:', self, False)
self.maximumVerticalStep = settings.FloatSpin().getFromValue(
0.02, 'Maximum Vertical Step (mm):', self, 0.42, 0.1)
self.executeTitle = 'Whittle'
