ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Get list of service provider applications available on the Controller")
time.sleep(rundelay)
result = ctrl.get_service_providers_info()
status = result.get_status()
if(status.eq(STATUS.OK)):
services = result.get_data()
print "Service providers:"
print json.dumps(services, default=lambda o: o.__dict__, sort_keys=True, indent=4)
else:
print ("\n")
" establishes permanent connection to the events notification\n" \
" stream. Once a data change event in the topology tree (such\n" \
" as add/remove switch, host or link) is detected it will be\n" \
" reported to the screen.\n" \
"<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n"
print "\n".strip()
print description
print "\n".strip()
time.sleep(rundelay)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
# Identifier of the network topology to be traced
# (name used by Controller for default topology instance)
topo_id = 'flow:1'
print "\n".strip()
print("<<< 'Controller': %s, Topology Identifier: '%s'" %
(ctrlIpAddr, topo_id))
time.sleep(rundelay)
# Data store for the changes
# Can be one of:
# - CONFIGURATION: Logical data store representing configuration
# state of the system and it's components.
# - OPERATIONAL: Logical data store representing operational
# state of the system and it's components
datastore = "OPERATIONAL"
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show a particular configuration module on the Controller")
moduleType = "opendaylight-rest-connector:rest-connector-impl"
moduleName = "rest-connector-default-impl"
print (" (module type: %s,\n module name: %s)" % (moduleType, moduleName))
time.sleep(rundelay)
result = ctrl.get_module_operational_state(moduleType, moduleName)
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Module:"
slist = result.get_data()
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
openflow_nodes = []
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n"
print ("<<< Get OpenFlow Inventory Information")
time.sleep(rundelay)
inv_obj = None
result = ctrl.build_inventory_object()
status = result.get_status()
if(status.eq(STATUS.OK)):
inv_obj = result.get_data()
assert(isinstance(inv_obj, Inventory))
else:
print ("\n")
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("\n")
print("<<< OpenVPN configuration example: Site-to-Site Mode with TLS")
print("\n")
rundelay = 3
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
vrouter = VRouter5600(ctrl, nodeName, nodeIpAddr, nodePortNum,
nodeUname, nodePswd)
print ("<<< 'Controller': %s, '%s': %s"
% (ctrlIpAddr, nodeName, nodeIpAddr))
print ("\n")
time.sleep(rundelay)
node_configured = False
result = ctrl.check_node_config_status(nodeName)
status = result.get_status()
if(status.eq(STATUS.NODE_CONFIGURED)):
node_configured = True
print ("<<< '%s' is configured on the Controller" % nodeName)
elif(status.eq(STATUS.DATA_NOT_FOUND)):
node_onfigured = False
d = {}
if (load_dict_from_file(f, d) == False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print("Failed to get Controller device attributes")
exit(0)
print "\n"
print("<<< Get list of all nodes registered on the Controller")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_nodes_operational_list()
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print "Nodes:"
nlist = result.get_data()
for item in nlist:
print " '{}'".format(item)
else:
print("\n")
print("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
" as add/remove switch, host or link) is detected it will be\n" \
" reported to the screen.\n" \
"<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n"
print "\n".strip()
print description
print "\n".strip()
time.sleep(rundelay)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
# Identifier of the network topology to be traced
# (name used by Controller for default topology instance)
topo_id = 'flow:1'
print "\n".strip()
print ("<<< 'Controller': %s, Topology Identifier: '%s'" % (ctrlIpAddr, topo_id))
time.sleep(rundelay)
# Data store for the changes
# Can be one of:
# - CONFIGURATION: Logical data store representing configuration
# state of the system and it's components.
# - OPERATIONAL: Logical data store representing operational
# state of the system and it's components
datastore = "OPERATIONAL"
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
nodeIpAddr = d['nodeIpAddr']
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print "\n"
print ("<<< NETCONF nodes configured on the Controller")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_netconf_nodes_in_config()
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print "Nodes configured:"
nlist = result.get_data()
for item in nlist:
print " '{}'".format(item)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
print ("<<< NETCONF nodes connection status on the Controller")
result = ctrl.get_netconf_nodes_conn_status()
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeId = "openflow:1"
except:
print ("Failed to get Controller device attributes")
exit(0)
print "\n"
print ("<<< Get info about '%s' node on the Controller" % nodeId)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_node_info(nodeId)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("'%s' node info:" % nodeId)
info = result.get_data()
print json.dumps(info, indent=4)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
nodeName = d['nodeName']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd, None)
print ("'Controller':")
print ctrl.brief_json()
print "\n"
print ("<<< Get list of OpenFlow nodes connected to the Controller")
time.sleep(rundelay)
result = ctrl.get_openflow_nodes_operational_list()
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("OpenFlow node names (composed as \"openflow:datapathid\"):")
nodenames = result.get_data()
print json.dumps(nodenames, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print("\n")
print("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd, None)
print("'Controller':")
print ctrl.brief_json()
print("\n")
print("<<< Get detailed information about ports on OpenFlow node '%s'" %
nodeName)
time.sleep(rundelay)
ofswitch = OFSwitch(ctrl, nodeName)
result = ofswitch.get_ports_list()
status = result.get_status()
if (status.eq(STATUS.OK) == True):
ports = result.get_data()
for port in ports:
result = ofswitch.get_port_detail_info(port)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
nodeIpAddr = d['nodeIpAddr']
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_schemas("controller-config")
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print "YANG models list:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__, sort_keys=True, indent=4)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
print ("%s" % status.detailed())
sys.exit(0)
print "\n"
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print "\n"
print("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print("\n")
print("<<< Get OpenFlow Network Topology information")
time.sleep(rundelay)
topology_ids = []
topologies = []
inventory = None
result = ctrl.build_inventory_object()
status = result.get_status()
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show notification event streams registered on the Controller")
time.sleep(rundelay)
result = ctrl.get_streams_info()
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Streams:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__, sort_keys=True, indent=4)
else:
print ("\n")
for opt, arg in opts:
if opt in ("-h", "--help"):
usage(sys.argv[0])
elif opt in ("-i", "--identifier"):
model_identifier = arg
elif opt in ("-v", "--version"):
model_version = arg
else:
print("Error: failed to parse option %s" % opt)
usage(sys.argv[0])
if(model_identifier == None) or (model_version == None):
print("Error: incomplete command")
usage(sys.argv[0])
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("<<< 'Controller': %s" % (ctrlIpAddr))
result = ctrl.get_schema("controller-config", model_identifier, model_version)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print "YANG model definition:"
schema = result.get_data()
print schema.encode('utf-8', 'replace')
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
print ("%s" % status.detailed())
exit(0)
print ("\n")
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
nodeIpAddr = d['nodeIpAddr']
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
node = NetconfNode(ctrl, nodeName, nodeIpAddr, nodePortNum,
nodeUname, nodePswd)
print (">>> Adding '%s' to the Controller '%s'" % (nodeName, ctrlIpAddr))
node_configured = False
result = ctrl.check_node_config_status(nodeName)
status = result.get_status()
if(status.eq(STATUS.NODE_CONFIGURED)):
node_configured = True
print ("<<< '%s' is already configured on the Controller" % nodeName)
elif(status.eq(STATUS.DATA_NOT_FOUND)):
node_configured = False
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print("\n")
print("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("'Controller':")
print ctrl.to_json()
print "\n"
print("<<< Show notification event streams registered on the Controller")
time.sleep(rundelay)
result = ctrl.get_streams_info()
status = result.get_status()
if (status.eq(STATUS.OK)):
print "Streams:"
slist = result.get_data()
print json.dumps(slist,
default=lambda o: o.__dict__,
sort_keys=True,
indent=4)
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 3
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Get list of service provider applications "
"available on the Controller")
time.sleep(rundelay)
result = ctrl.get_service_providers_info()
status = result.get_status()
if(status.eq(STATUS.OK)):
services = result.get_data()
print "Service providers:"
print json.dumps(services, default=lambda o: o.__dict__,
sort_keys=True, indent=4)
else:
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show sessions running on the Controller ")
nodeName = "controller-config"
time.sleep(rundelay)
result = ctrl.get_sessions_info(nodeName)
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Sessions:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__, sort_keys=True, indent=4)
else:
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
nodeIpAddr = d['nodeIpAddr']
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
node = NetconfNode(ctrl, nodeName, nodeIpAddr, nodePortNum, nodeUname, nodePswd)
print (">>> Adding '%s' to the Controller '%s'" % (nodeName, ctrlIpAddr))
result = ctrl.add_netconf_node(node)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("'%s' was successfully added to the Controller" % nodeName)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
ctrlIpAddr = '172.22.18.186'
ctrlPortNum = '8181'
ctrlUname = 'admin'
ctrlPswd = 'admin'
netconf_ids = []
netconf_nodes = []
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n"
print("<<< Get NETCONF Inventory Information")
time.sleep(rundelay)
result = ctrl.get_netconf_nodes_in_config()
status = result.get_status()
if (status.eq(STATUS.OK)):
netconf_ids = result.get_data()
else:
print("\n")
print(
"!!!Demo terminated, "
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show list of all NETCONF operations supported by the Controller")
time.sleep(rundelay)
result = ctrl.get_netconf_operations("controller-config")
status = result.get_status()
if(status.eq(STATUS.OK)):
print "NETCONF operations:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__, sort_keys=True, indent=4)
else:
print ("\n")
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
yangModelName = "flow-topology-discovery"
yangModelVerson = "2013-08-19"
print ("<<< Retrieve '%s' YANG model definition from the Controller" % yangModelName)
time.sleep(rundelay)
nodeName = "controller-config"
result = ctrl.get_schema(nodeName, yangModelName, yangModelVerson)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("YANG model:")
schema = result.get_data()
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print("Failed to get Controller or NETCONF device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print("\n")
print("<<< Creating Controller instance")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("'Controller':")
print ctrl.to_json()
print "\n"
print("<<< Show NETCONF nodes configured on the Controller")
time.sleep(rundelay)
result = ctrl.get_netconf_nodes_in_config()
status = result.get_status()
if (status.eq(STATUS.OK)):
print "Nodes configured:"
nlist = result.get_data()
for item in nlist:
print " '{}'".format(item)
else:
print("\n")
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print("\n")
print("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("'Controller':")
print ctrl.to_json()
print "\n"
print("<<< Show sessions running on the Controller ")
nodeName = "controller-config"
time.sleep(rundelay)
result = ctrl.get_sessions_info(nodeName)
status = result.get_status()
if (status.eq(STATUS.OK)):
print "Sessions:"
slist = result.get_data()
print json.dumps(slist,
default=lambda o: o.__dict__,
sort_keys=True,
ctrlPswd = d["ctrlPswd"]
nodeName = d["nodeName"]
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd, None)
print ("'Controller':")
print ctrl.brief_json()
print ("\n")
print ("<<< Get information about OpenFlow node '%s'" % nodeName)
time.sleep(rundelay)
ofswitch = OFSwitch(ctrl, nodeName)
result = ofswitch.get_switch_info()
status = result.get_status()
if status.eq(STATUS.OK) == True:
print ("Node '%s' generic info:" % nodeName)
info = result.get_data()
print json.dumps(info, indent=4)
else:
print ("\n")
ctrlUname = 'admin'
ctrlPswd = 'admin'
netconf_ids = []
netconf_nodes = []
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n"
print ("<<< Get NETCONF Inventory Information")
time.sleep(rundelay)
result = ctrl.get_netconf_nodes_in_config()
status = result.get_status()
if(status.eq(STATUS.OK)):
netconf_ids = result.get_data()
else:
print ("\n")
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print "\n"
print ("<<< Get list of all nodes registered on the Controller")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_nodes_operational_list()
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print "Nodes:"
nlist = result.get_data()
for item in nlist:
print " '{}'".format(item)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
try:
ctrlIpAddr = d["ctrlIpAddr"]
ctrlPortNum = d["ctrlPortNum"]
ctrlUname = d["ctrlUname"]
ctrlPswd = d["ctrlPswd"]
nodeName = d["nodeName"]
nodeIpAddr = d["nodeIpAddr"]
nodePortNum = d["nodePortNum"]
nodeUname = d["nodeUname"]
nodePswd = d["nodePswd"]
except:
print ("Failed to get Controller device attributes")
exit(0)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
node = NetconfNode(ctrl, nodeName, nodeIpAddr, nodePortNum, nodeUname, nodePswd)
print (">>> Removing '%s' from the Controller '%s'" % (nodeName, ctrlIpAddr))
result = ctrl.delete_netconf_node(node)
status = result.get_status()
if status.eq(STATUS.OK) == True:
print ("'%s' was successfully removed from the Controller" % nodeName)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
" establishes permanent connection to the events notification\n"\
" stream. Once a data change event in the inventory data store\n"\
" (such as add/remove node or flow entry) is detected\n"\
" it will be reported to the screen.\n"\
"<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n"
print "\n".strip()
print description
print "\n".strip()
time.sleep(rundelay)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print "\n".strip()
print("<<< 'Controller': %s" % (ctrlIpAddr))
time.sleep(rundelay)
# Data store for the changes
# Can be one of:
# - CONFIGURATION: Logical data store representing configuration
# state of the system and it's components.
# - OPERATIONAL: Logical data store representing operational
# state of the system and it's components
datastore = "OPERATIONAL"
# Scope of the data changes
# Can be one of:
# - BASE: Represents only a direct change of the node, such as
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller or NETCONF device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 3
print ("\n")
print ("<<< Creating Controller instance")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show NETCONF nodes configured on the Controller")
time.sleep(rundelay)
result = ctrl.get_netconf_nodes_in_config()
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Nodes configured:"
nlist = result.get_data()
for item in nlist:
print " '{}'".format(item)
else:
print ("\n")
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print("\n")
print("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("'Controller':")
print ctrl.to_json()
print "\n"
print("<<< Show all configuration modules on the Controller")
time.sleep(rundelay)
result = ctrl.get_config_modules()
status = result.get_status()
if (status.eq(STATUS.OK)):
print "Modules:"
slist = result.get_data()
print json.dumps(slist,
default=lambda o: o.__dict__,
sort_keys=True,
indent=4)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print "\n"
print ("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print ("\n")
print ("<<< Get OpenFlow Network Topology information")
time.sleep(rundelay)
topology_ids = []
topologies = []
inventory = None
result = ctrl.build_inventory_object()
status = result.get_status()
ctrlIpAddr = '172.22.18.186'
ctrlPortNum = '8181'
ctrlUname = 'admin'
ctrlPswd = 'admin'
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n"
print ("<<< Get NETCONF Configuration Information")
time.sleep(rundelay)
netconf_cfg_modules = []
result = ctrl.build_netconf_config_objects()
status = result.get_status()
if(status.eq(STATUS.OK) == True):
netconf_cfg_modules = result.get_data()
else:
" stream. Once a data change event in the inventory data store\n"
" (such as add/remove node or flow entry) is detected\n"
" it will be reported to the screen.\n"
"<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n"
)
print "\n".strip()
print description
print "\n".strip()
time.sleep(rundelay)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print "\n".strip()
print ("<<< 'Controller': %s" % (ctrlIpAddr))
time.sleep(rundelay)
# Data store for the changes
# Can be one of:
# - CONFIGURATION: Logical data store representing configuration
# state of the system and it's components.
# - OPERATIONAL: Logical data store representing operational
# state of the system and it's components
datastore = "OPERATIONAL"
# Scope of the data changes
# Can be one of:
# - BASE: Represents only a direct change of the node, such as
ctrlPswd = d['ctrlPswd']
except:
print("Failed to get Controller device attributes")
exit(0)
openflow_node_ids = []
openflow_nodes = []
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n"
print("<<< Get OpenFlow Inventory Information")
time.sleep(rundelay)
inv_obj = None
result = ctrl.build_inventory_object()
status = result.get_status()
if (status.eq(STATUS.OK) == True):
inv_obj = result.get_data()
assert (isinstance(inv_obj, Inventory))
else:
print("\n")
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print("\n")
print("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd, None)
print("'Controller':")
print ctrl.brief_json()
print "\n"
print("<<< Get list of OpenFlow nodes connected to the Controller")
time.sleep(rundelay)
result = ctrl.get_openflow_nodes_operational_list()
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("OpenFlow node names (composed as \"openflow:datapathid\"):")
nodenames = result.get_data()
print json.dumps(nodenames, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
nodeIpAddr = d['nodeIpAddr']
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_schemas("controller-config")
status = result.get_status()
if(status.eq(STATUS.OK)):
print "YANG models list:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__,
sort_keys=True, indent=4)
else:
print ("\n")
print ("!!!Failed, reason: %s" % status.brief().lower())
print ("%s" % status.detailed())
sys.exit(0)
print "\n"
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
nodeIpAddr = d['nodeIpAddr']
nodePortNum = d['nodePortNum']
nodeUname = d['nodeUname']
nodePswd = d['nodePswd']
except:
print("Failed to get Controller device attributes")
exit(0)
print "\n"
print("<<< NETCONF nodes configured on the Controller")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
result = ctrl.get_netconf_nodes_in_config()
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print "Nodes configured:"
nlist = result.get_data()
for item in nlist:
print " '{}'".format(item)
else:
print("\n")
print("!!!Failed, reason: %s" % status.brief().lower())
exit(0)
print "\n"
print("<<< NETCONF nodes connection status on the Controller")
result = ctrl.get_netconf_nodes_conn_status()
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("\n")
print(
"<<< OpenVPN configuration example: Site-to-Site Mode with Preshared Secret"
)
print("\n")
rundelay = 5
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
vrouter = VRouter5600(ctrl, nodeName, nodeIpAddr, nodePortNum, nodeUname,
nodePswd)
print("<<< 'Controller': %s, '%s': %s" %
(ctrlIpAddr, nodeName, nodeIpAddr))
print("\n")
time.sleep(rundelay)
result = ctrl.add_netconf_node(vrouter)
status = result.get_status()
if (status.eq(STATUS.OK) == True):
print("<<< '%s' added to the Controller" % nodeName)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
ctrlPswd = d['ctrlPswd']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Get list of YANG models supported by the Controller")
time.sleep(rundelay)
nodeName = "controller-config"
result = ctrl.get_schemas(nodeName)
status = result.get_status()
if(status.eq(STATUS.OK)):
print "YANG models list:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__, sort_keys=True, indent=4)
else:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 5
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_MPLS_UCAST
in_port = 13
mpls_label = 27
# --- Flow Actions: Set Field
# Output
new_mpls_label = 44
output_port = 14
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
from framework.controller.inventory import NetconfConfigModule
if __name__ == "__main__":
ctrlIpAddr = '172.22.18.186'
ctrlPortNum = '8181'
ctrlUname = 'admin'
ctrlPswd = 'admin'
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
rundelay = 2
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n"
print("<<< Get NETCONF Configuration Information")
time.sleep(rundelay)
netconf_cfg_modules = []
result = ctrl.build_netconf_config_objects()
status = result.get_status()
if (status.eq(STATUS.OK) == True):
netconf_cfg_modules = result.get_data()
else:
print("\n")
print(