def testRFInfoPkt(self):
self.fei_dev, alloc_params = self.getAllocationContext(ALLOCATE_RCV)
#create rf_info uses port and connect to MSDD
out_rf_info_port=frontend.OutRFInfoPort("out_control")
in_rf_info_port=self.fei_dev.getPort("RFInfo_in")
out_rf_info_port.connectPort(in_rf_info_port,"test_rf_flow")
bw=alloc_params['wbddc_bw']
sr=alloc_params['wbddc_srate']
# allocation params
flow_id = "ca-710-flow-2"
cf=100e6
# send info pkto
pkt=_generateRFInfoPkt(cf,bw,rf_flow_id=flow_id)
out_rf_info_port._set_rfinfo_pkt(pkt)
# check rf_flow_id was set
n=len(self.fei_dev.frontend_tuner_status)
expected=[flow_id]*n
actual=[ x["FRONTEND::tuner_status::rf_flow_id"] for x in self.fei_dev.frontend_tuner_status ]
self.assertEqual(expected,actual, "Mismatch of RF Flow Ids for tuners")
# allocation for sample rate and rf_flow_id
alloc1=frontend.createTunerAllocation(center_frequency=cf, sample_rate=sr, rf_flow_id=flow_id)
ret=self.fei_dev.allocateCapacity( alloc1)
alloc1_aid = alloc1["FRONTEND::tuner_allocation"]["FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True,ret, "Allocation failed using rf_flow_id")
self.alloc1=alloc1
alloc2_aid = alloc1_aid
if alloc_params['nbddc_srate'] is not None :
# allocation for center freq and rf_flow_id
alloc2=frontend.createTunerAllocation(center_frequency=cf, rf_flow_id=flow_id)
ret=self.fei_dev.allocateCapacity( alloc2)
alloc2_aid = alloc2["FRONTEND::tuner_allocation"]["FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True,ret, "Allocation failed using rf_flow_id again ")
self.alloc2=alloc2
# valid rf_flow_id was probagated downstream
sink=sb.StreamSink()
sdds_in=sb.launch('rh.SourceSDDS', properties={'interface':INTERFACE})
sb.start()
self.fei_dev.connect(sdds_in, connectionId=alloc2_aid, usesPortName='dataSDDS_out')
sdds_in.connect(sink, usesPortName="dataShortOut")
kws=None
try:
sink_data=sink.read()
kws=properties.props_to_dict(sink_data.sri.keywords)
except:
pass
self.assertEqual( kws["FRONTEND::RF_FLOW_ID"] , flow_id, "Missing RF_FLOW_ID from keyword list")
def testRFFlowIDFailure(self):
#create rf_info uses port and connect to MSDD
out_rf_info_port = frontend.OutRFInfoPort("out_control")
in_rf_info_port = self.comp.getPort("RFInfo_in")
out_rf_info_port.connectPort(in_rf_info_port, "test_rf_flow")
# get params for allocations
bw = float(self.comp.frontend_tuner_status[0]
["FRONTEND::tuner_status::available_bandwidth"])
sr = float(self.comp.frontend_tuner_status[0]
["FRONTEND::tuner_status::available_sample_rate"])
# allocation params
flow_id = "ca-710-flow"
cf = 100e6
# set rf flow id
out_rf_info_port._set_rf_flow_id(flow_id)
# check rf_flow_id was set
n = len(self.comp.frontend_tuner_status)
expected = [flow_id] * n
actual = [
x["FRONTEND::tuner_status::rf_flow_id"]
for x in self.comp.frontend_tuner_status
]
self.assertEqual(expected, actual,
"Mismatch of RF Flow Ids for tuners")
# allocation for sample rate and rf_flow_id
alloc1 = frontend.createTunerAllocation(center_frequency=cf,
sample_rate=sr,
rf_flow_id=flow_id)
ret = self.comp.allocateCapacity(alloc1)
alloc1_aid = alloc1["FRONTEND::tuner_allocation"][
"FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True, ret, "Allocation failed using rf_flow_id")
# allocation for center freq and rf_flow_id
alloc2 = frontend.createTunerAllocation(center_frequency=cf,
rf_flow_id="noworkie")
ret = self.comp.allocateCapacity(alloc2)
self.assertEqual(
False, ret,
"Allocation should have failed for unknown rf_flow_id ")
def __init__(self, devmgr, uuid, label, softwareProfile, compositeDevice,
execparams):
FrontendTunerDevice.__init__(self, devmgr, uuid, label,
softwareProfile, compositeDevice,
execparams)
ThreadedComponent.__init__(self)
self.listeners = {}
# self.auto_start is deprecated and is only kept for API compatibility
# with 1.7.X and 1.8.0 devices. This variable may be removed
# in future releases
self.auto_start = False
# Instantiate the default implementations for all ports on this device
self.port_RFInfo_in = frontend.InRFInfoPort("RFInfo_in")
self.port_AnalogTuner_in = frontend.InAnalogTunerPort("AnalogTuner_in")
self.port_RFInfo_out = frontend.OutRFInfoPort("RFInfo_out")
self.device_kind = "FRONTEND::TUNER"
self.frontend_listener_allocation = frontend.fe_types.frontend_listener_allocation(
)
self.frontend_tuner_allocation = frontend.fe_types.frontend_tuner_allocation(
)
def testRFFlowID(self):
#create rf_info uses port and connect to MSDD
out_rf_info_port = frontend.OutRFInfoPort("out_control")
in_rf_info_port = self.comp.getPort("RFInfo_in")
out_rf_info_port.connectPort(in_rf_info_port, "test_rf_flow")
# get params for allocations
bw = self.alloc_params['wbddc_bw']
sr = self.alloc_params['wbddc_srate']
# allocation params
flow_id = "ca-710-flow"
cf = 100e6
# set rf flow id
out_rf_info_port._set_rf_flow_id(flow_id)
# check rf_flow_id was set
n = len(self.comp.frontend_tuner_status)
expected = [flow_id] * n
actual = [
x["FRONTEND::tuner_status::rf_flow_id"]
for x in self.comp.frontend_tuner_status
]
self.assertEqual(expected, actual,
"Mismatch of RF Flow Ids for tuners")
# allocation for sample rate and rf_flow_id
alloc1 = frontend.createTunerAllocation(center_frequency=cf,
sample_rate=sr,
rf_flow_id=flow_id)
ret = self.comp.allocateCapacity(alloc1)
alloc1_aid = alloc1["FRONTEND::tuner_allocation"][
"FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True, ret, "Allocation failed using rf_flow_id")
alloc2_aid = alloc1_aid
if self.alloc_params['nbddc_srate'] is not None:
# dual channel we need to provide specific rate so the correct DDC is selected that matches the same rf_flow_id
if '2w' in self.msdd_id:
# allocation for center freq and rf_flow_id
alloc2 = frontend.createTunerAllocation(
center_frequency=cf,
sample_rate=self.alloc_params['nbddc_srate'],
sample_rate_tolerance=1.0,
rf_flow_id=flow_id)
else:
# allocation for center freq and rf_flow_id
alloc2 = frontend.createTunerAllocation(center_frequency=cf,
rf_flow_id=flow_id)
ret = self.comp.allocateCapacity(alloc2)
alloc2_aid = alloc2["FRONTEND::tuner_allocation"][
"FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True, ret,
"Allocation failed using rf_flow_id again ")
# valid rf_flow_id was probagated downstream
sink = sb.StreamSink()
sdds_in = sb.launch(
'rh.SourceSDDS',
properties={
'interface': INTERFACE,
'advanced_optimizations': {
'advanced_optimizations::sdds_pkts_per_bulkio_push': 5
},
'attachment_override': {
'attachment_override:endianness': "1234"
}
})
sb.start()
self.comp.connect(sdds_in,
connectionId=alloc2_aid,
usesPortName='dataSDDS_out')
sdds_in.connect(sink, usesPortName="dataShortOut")
kws = None
try:
sink_data = sink.read()
kws = properties.props_to_dict(sink_data.sri.keywords)
except:
pass
self.assertEqual(kws["FRONTEND::RF_FLOW_ID"], flow_id,
"Missing RF_FLOW_ID from keyword list")
def testRFFlowID(self):
#create rf_info uses port and connect to MSDD
out_rf_info_port = frontend.OutRFInfoPort("out_control")
in_rf_info_port = self.comp.getPort("RFInfo_in")
out_rf_info_port.connectPort(in_rf_info_port, "test_rf_flow")
# get params for allocations
bw = float(self.comp.frontend_tuner_status[0]
["FRONTEND::tuner_status::available_bandwidth"])
sr = float(self.comp.frontend_tuner_status[0]
["FRONTEND::tuner_status::available_sample_rate"])
# allocation params
flow_id = "ca-710-flow"
cf = 100e6
# set rf flow id
out_rf_info_port._set_rf_flow_id(flow_id)
# check rf_flow_id was set
n = len(self.comp.frontend_tuner_status)
expected = [flow_id] * n
actual = [
x["FRONTEND::tuner_status::rf_flow_id"]
for x in self.comp.frontend_tuner_status
]
self.assertEqual(expected, actual,
"Mismatch of RF Flow Ids for tuners")
# allocation for sample rate and rf_flow_id
alloc1 = frontend.createTunerAllocation(center_frequency=cf,
sample_rate=sr,
rf_flow_id=flow_id)
ret = self.comp.allocateCapacity(alloc1)
alloc1_aid = alloc1["FRONTEND::tuner_allocation"][
"FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True, ret, "Allocation failed using rf_flow_id")
# allocation for center freq and rf_flow_id
alloc2 = frontend.createTunerAllocation(center_frequency=cf,
rf_flow_id=flow_id)
ret = self.comp.allocateCapacity(alloc2)
alloc2_aid = alloc2["FRONTEND::tuner_allocation"][
"FRONTEND::tuner_allocation::allocation_id"]
self.assertEqual(True, ret,
"Allocation failed using rf_flow_id again ")
# valid rf_flow_id was probagated downstream
sink = sb.StreamSink()
sdds_in = sb.launch('rh.SourceSDDS',
properties={'interface': INTERFACE})
sb.start()
self.comp.connect(sdds_in,
connectionId=alloc2_aid,
usesPortName='dataSDDS_out')
sdds_in.connect(sink, usesPortName="dataShortOut")
kws = None
try:
sink_data = sink.read()
kws = properties.props_to_dict(sink_data.sri.keywords)
except:
pass
self.assertEqual(kws["FRONTEND::RF_FLOW_ID"], flow_id,
"Missing RF_FLOW_ID from keyword list")
