def contour2gds(contour0, args):
# print 'contour0',contour0
contour = [[ele[0] for ele in arr] for arr in contour0]
# print 'contour1',contour
if args.sharpen:
contour = sharpenCorner(contour, args)
# print 'contour2',contour
flat_list = [item for sublist in contour for item in sublist]
# print 'flat_list',flat_list
x = [arr[0] for arr in flat_list]
y = [arr[1] for arr in flat_list]
# print 'x', x
# print 'y', y
xlength = max(x) - min(x)
ylength = max(y) - min(y)
maxY = max(y)
# contour=[[[ele[0][0],maxY-ele[0][1]] for ele in arr] for arr in contour0]
contour = [[[ele[0], maxY - ele[1]] for ele in arr] for arr in contour]
# for sublist in contour:
# for ele in sublist:
# ele[1]=maxY-ele[1]
poly_cell = gdspy.Cell('tmp')
poly = gdspy.PolygonSet(contour, 1)
# poly_cell.add(poly)
# print 'max/min x',max(x),min(x)
# print 'max/min y',max(y),min(y)
# print 'length',xlength,ylength
nX = args.nX
nY = args.nY
xsep = max(xlength, ylength) * args.sep
ysep = xsep
for i in range(nX):
for j in range(nY):
xpos = (xlength + xsep) * (i + 1)
ypos = (ylength + ysep) * (j + 1)
trans = gdspy.copy(poly, xpos, ypos)
poly_cell.add(trans)
if args.out_file is not None:
gdspy.write_gds(args.out_file,
unit=args.scale * 1.0e-9,
precision=1.0e-9)
def subtract(self, blank_entities, tool_entities, keep_originals=True):
if isinstance(blank_entities, list):
for blank_entity in blank_entities:
self.subtract(blank_entity,
tool_entities,
keep_originals=keep_originals)
else:
blank_entity = blank_entities
#1 We clear the cell of all elements and create lists to store the polygons
blank_polygon = self.gds_object_instances.pop(blank_entity.name)
self.cell = self.gds_cells[
blank_entity.body.
name] # assumes blank and tool are in same body
self.cell.polygons.remove(blank_polygon)
tool_polygons = []
for tool_entity in tool_entities:
tool_polygon = self.gds_object_instances[tool_entity.name]
if isinstance(tool_polygon, gdspy.PolygonSet):
for polygon in tool_polygon.polygons:
tool_polygons.append(polygon)
else:
tool_polygons.append(tool_polygon)
#2 subtract operation
tool_polygon_set = gdspy.PolygonSet(tool_polygons,
layer=blank_entity.layer)
subtracted = gdspy.boolean(blank_polygon,
tool_polygon_set,
'not',
precision=TOLERANCE,
max_points=0,
layer=blank_entity.layer)
if subtracted is not None:
#3 At last we update the cell and the gds_object_instance
self.gds_object_instances[blank_entity.name] = subtracted
self.cell.add(subtracted)
else:
print('Warning: the entity %s was fully \
subtracted' % blank_entity.name)
dummy = gdspy.Polygon([[0, 0]])
self.gds_object_instances[blank_entity.name] = dummy
self.cell.add(dummy)
blank_entity.delete()
def gen_gds(save_folder: str, sim_width: float) -> None:
"""Generates a GDS file of the grating.
Args:
save_folder: Location where log files are saved. It is assumed that
the optimization plan is also saved there.
sim width: width of the simulation
"""
# Load the optimization plan.
with open(os.path.join(save_folder, "optplan.json")) as fp:
plan = optplan.loads(fp.read())
dx = plan.transformations[-1].parametrization.simulation_space.mesh.dx
# Load the data from the latest log file.
with open(workspace.get_latest_log_file(save_folder), "rb") as fp:
log_data = pickle.load(fp)
if log_data["transformation"] != plan.transformations[-1].name:
raise ValueError("Optimization did not run until completion.")
coords = log_data["parametrization"]["vector"] * dx
# if plan.transformations[-1].parametrization.inverted:
# coords = np.insert(coords, 0, 0, axis=0)
# coords = np.insert(coords, -1, sim_width, axis=0)
# TODO Not sure about this part below creating rectangles
# Change the variables and names here
# `coords` now contains the location of the grating edges. Now draw a
# series of rectangles to represent the grating.
grating_poly = []
for i in range(0, len(coords), 2):
grating_poly.append(
((coords[i], -sim_width / 2), (coords[i], sim_width / 2),
(coords[i - 1], sim_width / 2), (coords[i - 1], -sim_width / 2)))
# Save the grating to `annulus.gds`.
grating = gdspy.Cell("ANNULUS", exclude_from_current=True)
grating.add(gdspy.PolygonSet(grating_poly, 100))
gdspy.write_gds(os.path.join(save_folder, "annulus.gds"), [grating],
unit=1.0e-9,
precision=1.0e-9)
def __convertShapely2gds(topCell, shape, layerNumber):
exterior = list(shape.exterior.coords)
interiors = [list(interior.coords) for interior in list(shape.interiors)]
exterior = gdspy.Polygon(exterior, layer=layerNumber)
interiors = gdspy.PolygonSet(interiors, layer=layerNumber)
operands = [exterior, interiors]
# The epsilon value of 1e-7 was chosen to avoid segfaults that would occur
# at the default value of epsilon (1e-13)
# If Python is crashing at this line in the future, increase the value of
# epsilon to correct the issue.
booled = gdspy.boolean(operands,
lambda ext, int: ext and not int,
layer=layerNumber,
eps=1e-7)
topCell.add(booled)
def rect_array(self, pos, size, columns,rows,spacing, origin=(0, 0), **kwargs):
pos, size = parse_entry(pos, size)
name = kwargs['name']
layer = kwargs['layer']
points = [(pos[0],pos[1]), (pos[0]+size[0],pos[1]+0), (pos[0]+size[0],pos[1]+size[1]), (pos[0],pos[1]+size[1])]
poly1 = gdspy.Polygon(points, layer)
self.gds_object_instances[name] = poly1
cell_to_copy = gdspy.Cell('cell_to_copy')
self.gds_cells['cell_to_copy'] = cell_to_copy
cell_to_copy.add(poly1)
spacing = parse_entry(spacing)
cell_array=gdspy.CellArray(cell_to_copy, columns, rows, spacing, origin)
polygon_list=cell_array.get_polygons()
poly2 = gdspy.PolygonSet(polygon_list, layer)
self.cell.add(poly2)
self.gds_object_instances[name] = poly2
def poly2gds(polyvertice, corners, args):
f = open('auto.seq', 'w')
epsilon = 4
for vset in polyvertice:
# print('vset',vset)
seqList = []
for v in vset:
for i, corner in enumerate(corners):
dist = distance(v, corner)
if dist <= epsilon:
# print('dist',dist)
seqList.append(i)
continue
f.write(','.join(str(x) for x in seqList) + '\n')
# print('seqList',seqList)
f.close()
poly_cell = gdspy.Cell('tmp')
poly = gdspy.PolygonSet(polyvertice, 1)
# poly_cell.add(poly)
xlength = max(corners[:, 0]) - min(corners[:, 0])
ylength = max(corners[:, 1]) - min(corners[:, 1])
nX = args.nX
nY = args.nY
xsep = max(xlength, ylength) * args.sep
ysep = xsep
for i in range(nX):
for j in range(nY):
xpos = (xlength + xsep) * (i + 1)
ypos = (ylength + ysep) * (j + 1)
trans = gdspy.copy(poly, xpos, ypos)
# print poly
poly_cell.add(trans)
if args.out_file is not None:
gdspy.write_gds(args.out_file,
unit=args.scale * 1.0e-9,
precision=1.0e-9)
def cut_out_holes(polygons, layer=0, datatype=0):
top_level_polygons = []
used_polygons = set()
for polygon_ext in polygons:
polygons_to_cut = [polygon_ext]
for polygon_int in polygons:
if polygon_ext is polygon_int:
continue
# if g.inside([polygon_ext], g.Polygon(polygon_int))[0]:
if g.inside([polygon_int], g.Polygon(polygon_ext))[0]:
polygons_to_cut.append(polygon_int)
used_polygons.add(make_hashable(polygon_int))
if len(polygons_to_cut) >= 2:
used_polygons.add(make_hashable(
polygons_to_cut[0])) # don't add an un-cut exterior
top_level_polygons.append(polygons_to_cut)
for polygon in polygons:
if make_hashable(polygon) not in used_polygons:
top_level_polygons.append([polygon])
result = [
reduce(partial(cut_out_hole, layer=layer, datatype=datatype),
polygons_to_cut) for polygons_to_cut in top_level_polygons
]
return g.PolygonSet(result, layer=layer, datatype=datatype)
def generate_jj(self):
contact_pad_a_outer = 10.5
contact_pad_b_outer = 6
self.contact_pad_b_outer = contact_pad_b_outer
self.contact_pad_a_outer = contact_pad_a_outer
if self.hole_in_squid_pad==True:
contact_pad_a_inner = 7.5
contact_pad_b_inner = 1
else:
contact_pad_a_inner = 0
contact_pad_b_inner = 0
# Add contact pad1
points0 = [(self._x0 - contact_pad_a_outer / 2, self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_outer / 2, self._y0),
(self._x0 + contact_pad_a_outer / 2, self._y0),
(self._x0 + contact_pad_a_outer / 2, self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_outer / 2, self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 - contact_pad_b_inner),
(self._x0 + contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 - contact_pad_b_inner),
(self._x0 + contact_pad_a_inner / 2, self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2),
(self._x0 - contact_pad_a_inner / 2, self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 - contact_pad_b_inner),
]
x1 = self._x0
y1 = self._y0 - contact_pad_b_outer
# parametr1=H_b
H_a = 0.5#1
H_b = self._parametr1
L_a = 4#10.7
L_b = 0.4#0.75
h = 0.16#0.5
if self.add_JJ == False:
points1 = [(x1 - H_a / 2, y1),
(x1 + H_a / 2, y1),
(x1 + H_a / 2, y1 - H_b),
(x1 - H_a / 2, y1 - H_b)
]
else:
points1 = [(x1 - 3 * H_a, y1 - H_b / 3),
(x1 + H_a, y1 - H_b / 3),
(x1 + H_a, y1 - H_b / 3 - self.jj3_height),
(x1 - 2 * H_a, y1 - H_b / 3 - self.jj3_height),
(x1 - 2 * H_a, y1 - H_b),
(x1 - 3 * H_a, y1 - H_b)
]
points1_1 = [(x1 - H_a, y1),
(x1 - H_a/4, y1),
(x1 - H_a/4, y1 - H_b / 4),
(x1 - H_a + self.jj3_width, y1 - H_b / 4),
(x1 - H_a + self.jj3_width, y1 - H_b / 3 + h),
(x1 - H_a, y1 - H_b / 3 + h)
]
x2 = x1 - 3* H_a + L_a/4
y2 = y1 - H_b
points2 = [(x2 - L_a / 2, y2),
(x2 + L_a / 2, y2),
(x2 + L_a / 2, y2 - L_b),
(x2 - L_a / 2, y2 - L_b)
]
H1_a = self.jj2_width#0.8
H1_b = 1#2
H2_a = self.jj1_width#0.8
H2_b = 1#2
x3 = x2 - L_a / 2 + H1_a / 2
y3 = y2 - L_b
x4 = x2 + L_a / 2 - H1_a / 2
y4 = y2 - L_b
points3 = [(x3 - H1_a / 2, y3),
(x3 + H1_a / 2, y3),
(x3 + H1_a / 2, y3 - H1_b),
(x3 - H1_a / 2, y3 - H1_b)
]
points4 = [(x4 - H2_a / 2, y4),
(x4 + H2_a / 2, y4),
(x4 + H2_a / 2, y4 - H2_b),
(x4 - H2_a / 2, y4 - H2_b)
]
x5 = x3 + H1_a / 2
y5 = y3 - H1_b
x6 = x4 - H2_a / 2
y6 = y4 - H2_b
# parametr2=pad1_a
# parametr3=pad2_a
pad1_a = self.jj2_width
pad1_b = 1#3
pad2_a = self.jj1_width
pad2_b = 1#3
points5_for_pad1 = [(x5, y5),
(x5, y5 - pad1_b),
(x5 - pad1_a, y5 - pad1_b),
(x5 - pad1_a, y5)
]
points6_for_pad2 = [(x6, y6),
(x6 + pad2_a, y6),
(x6 + pad2_a, y6 - pad2_b),
(x6, y6 - pad2_b)
]
contact_pad1_a_outer = L_a+2#6#13
contact_pad1_b_outer = 2.5#6.4
contact_pad1_a_inner = L_a+1
contact_pad1_b_inner = 2
x7 = x2#self._x0
y7 = self._y0 - contact_pad_b_outer - H_b - L_b - H1_b - pad1_b - h - contact_pad1_b_outer
x7_ = x7
y7_ = y7 + (contact_pad1_b_outer - contact_pad1_b_inner)
points7 = [(x7 - contact_pad1_a_outer / 2, y7 + contact_pad1_b_outer),
(x7 - contact_pad1_a_outer / 2, y7),
(x7 + contact_pad1_a_outer / 2, y7),
(x7 + contact_pad1_a_outer / 2, y7 + contact_pad1_b_outer),
(x7_ + contact_pad1_a_inner / 2, y7_ + contact_pad1_b_inner),
(x7_ + contact_pad1_a_inner / 2, y7_),
(x7_ - contact_pad1_a_inner / 2, y7_),
(x7_ - contact_pad1_a_inner / 2, y7_ + contact_pad1_b_inner)]
x8 = x7_ - contact_pad1_a_inner / 2
y8 = y7_ + contact_pad1_b_inner
x9 = x7_ + contact_pad1_a_inner / 2
y9 = y7_ + contact_pad1_b_inner
# parametr4=pad3_b
# parametr5=pad4_b
pad3_a = 1.5#2.5
pad3_b = self.jj2_height
pad4_a = 1.5#2.5
pad4_b = self.jj1_height
points8_for_pad3 = [(x8, y8),
(x8 + pad3_a, y8),
(x8 + pad3_a, y8 - pad3_b),
(x8, y8 - pad3_b)]
points9_for_pad4 = [(x9 - pad4_a, y9),
(x9, y9),
(x9, y9 - pad4_b),
(x9 - pad4_a, y9 - pad4_b)]
delta = contact_pad1_b_outer
L1_a = 3.4
L1_b = 0.5#1
L2_a = 3.4
L2_b = 0.5#1
x10 = x7 - contact_pad1_a_outer / 2
y10 = y7 + L1_b
x11 = x7 + contact_pad1_a_outer / 2
y11 = y7 + L2_b
rec1_a_outer = 5
rec1_b_outer = 5
if self.hole_in_squid_pad == True:
rec1_a_inner = 2
rec1_b_inner = 1
else:
rec1_a_inner = 0
rec1_b_inner = 0
rec2_a_outer = rec1_a_outer
rec2_b_outer = rec1_b_outer
rec2_a_inner = rec1_a_inner
rec2_b_inner = rec1_b_inner
self.rect_size_a = rec1_a_outer
self.rect_size_b = rec1_b_outer
points10 = [(x10 - L1_a, y10),
(x10, y10),
(x10, y10 - L1_b),
(x10 - L1_a, y10 - L1_b)]
points11 = [(x11, y11),
(x11 + L2_a, y11),
(x11 + L2_a, y11 - L2_b),
(x11, y11 - L2_b)]
x12 = x10 - L1_a - (rec1_a_outer / 2)
y12 = y10 - L1_b / 2 + (rec1_b_outer / 2)
x13 = x11 + L2_a + (rec2_a_outer / 2)
y13 = y11 - L2_b / 2 + (rec2_b_outer / 2)
self.rect1 = (x12, y12)
self.rect2 = (x13, y13)
points12 = [(x12 - rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_outer / 2, y12),
(x12 + rec1_a_outer / 2, y12),
(x12 + rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
(x12 + rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
(x12 + rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
]
points13 = [(x13 - rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_outer / 2, y13),
(x13 + rec2_a_outer / 2, y13),
(x13 + rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
(x13 + rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
(x13 + rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
]
if self.add_JJ == False:
squid = gdspy.PolygonSet([points0, points1, points2, points3, points4, points5_for_pad1, points6_for_pad2,
points7, points8_for_pad3, points9_for_pad4, points10, points11, points12, points13])
else:
squid = gdspy.PolygonSet([points0, points1, points1_1, points2, points3, points4, points5_for_pad1, points6_for_pad2,
points7, points8_for_pad3, points9_for_pad4,points10, points11, points12, points13])
return squid
def XX(W, S, tl=37, bl=33):
'''
Generate XX crossover
W : Width of the metal track.
S : Spacing between the metal tracks.
tl : Upper metal layer number.
The default of 37 is the top metal layer of the MOCMOS technology.
This is convenient when using 'Electric' to view the resulting GDS.
bl : Lower metal layer number.
The default of 33 is the 2nd metal layer of the MOCMOS technology.
This is convenient when using 'Electric' to view the resulting GDS.
'''
##########################
# Some initial constants #
##########################
tanz = np.tan(np.pi / 8)
x = S * tanz
#############################
# Points for 'XX' structure #
#############################
A4x = 2 * W + 1.5 * S - W * np.sqrt(2) - S / np.sqrt(2)
A4y = 2 * W + 1.5 * S
B4x = x + S / 2 + S / np.sqrt(2) + W + W * np.sqrt(2)
B4y = A4y
C4x = B4x
C4y = W + 1.5 * S
D4x = 1.5 * S + W - S / np.sqrt(2)
D4y = C4y
E4x = W + S / 2 + S / np.sqrt(2)
E4y = W + S / 2
F4x = B4x
F4y = E4y
G4x = B4x
G4y = S / 2
H4x = S / np.sqrt(2) + W * np.sqrt(2) + S / 2
H4y = G4y
######################################################
# Collect points of 'XX' into list of list of tuples #
######################################################
######################################################
# Top of the 'XX' structure #
# The two upper right to lower left crossover _/- #
######################################################
xtop = [[], []]
xtop[0].append((A4x, A4y))
xtop[0].append((B4x, B4y))
xtop[0].append((C4x, C4y))
xtop[0].append((D4x, D4y))
xtop[0].append((-1.0 * E4x, -1.0 * E4y))
xtop[0].append((-1.0 * F4x, -1.0 * F4y))
xtop[0].append((-1.0 * G4x, -1.0 * G4y))
xtop[0].append((-1.0 * H4x, -1.0 * H4y))
xtop[1].append((E4x, E4y))
xtop[1].append((F4x, F4y))
xtop[1].append((G4x, G4y))
xtop[1].append((H4x, H4y))
xtop[1].append((-1.0 * A4x, -1.0 * A4y))
xtop[1].append((-1.0 * B4x, -1.0 * B4y))
xtop[1].append((-1.0 * C4x, -1.0 * C4y))
xtop[1].append((-1.0 * D4x, -1.0 * D4y))
#####################################################
# Bottom of the 'XX' structure #
# The two lower right to upper left crossover -\_ #
#####################################################
xbot = [[], []]
xbot[0].append((A4x, -1.0 * A4y))
xbot[0].append((B4x, -1.0 * B4y))
xbot[0].append((C4x, -1.0 * C4y))
xbot[0].append((D4x, -1.0 * D4y))
xbot[0].append((-1.0 * E4x, E4y))
xbot[0].append((-1.0 * F4x, F4y))
xbot[0].append((-1.0 * G4x, G4y))
xbot[0].append((-1.0 * H4x, H4y))
xbot[1].append((E4x, -1.0 * E4y))
xbot[1].append((F4x, -1.0 * F4y))
xbot[1].append((G4x, -1.0 * G4y))
xbot[1].append((H4x, -1.0 * H4y))
xbot[1].append((-1.0 * A4x, A4y))
xbot[1].append((-1.0 * B4x, B4y))
xbot[1].append((-1.0 * C4x, C4y))
xbot[1].append((-1.0 * D4x, D4y))
###################################
# Generate 'XX' crossover polygon #
###################################
XX_Shapes = []
XX_Shapes.append(gdspy.PolygonSet(xtop, tl))
XX_Shapes.append(gdspy.PolygonSet(xbot, bl))
######################################
# Create GDS cell for 'XX' crossover #
######################################
XX = gdspy.Cell('XX', exclude_from_current=False)
###########################################
# Add the 'XX' polygons into the GDS cell #
###########################################
for shape in XX_Shapes:
XX.add(shape)
########################
# Add via to crossover #
########################
#######################################################################
# Use cell 'VIA_ARR' generated by function 'VIA' as the via structure #
#######################################################################
#via locations
via_4l = [
(B4x - W / 2, -0.5 * (S + W)), (-1 * (B4x - W / 2), 0.5 * (S + W)),
(B4x - W / 2, -1.5 * (W + S)), (-1 * (B4x - W / 2), 1.5 * (W + S))
]
for v_loc in via_4l:
VIA = gdspy.CellReference('VIA_ARR')
VIA.translate(v_loc[0], v_loc[1])
XX.add(VIA)
#End of adding via
XX.flatten()
#End of 'XX' crossover generation
####################################################
# Generate a mirrored version of 'XX' called 'XXM' #
####################################################
XX_ref = gdspy.CellReference('XX', (0, 0), x_reflection=True)
XXM = gdspy.Cell('XXM', exclude_from_current=False)
XXM.add(XX_ref).flatten()
def makePolySet(self, path):
### Converts a path object to a polyset object
return gdspy.PolygonSet(self.path.polygons)
def verniers(scale=[1, 0.5, 0.1],
layers=[1, 2],
label='TE',
text_size=20,
reversed=False):
""" Create a cell with vernier aligners.
Parameters
----------
scale : iterable of float (default [1,0.5,0.25])
each float in list is the offset of a vernier.
for each of them a vernier will be created in the X-Y axis
layers : 2-len iterable of int (default [1,2])
define the two layers for the verniers.
label : str (default "TE")
add a label to the set of verniers.
text_size : float (default)
label size
reversed : boolean
if true, creates a negative alignment mark for the second layer
Returns
-------
cell : phidl.Device.
"""
cell = dl.Device(name="verniers")
import numpy
if not isinstance(scale, numpy.ndarray):
scale = np.array(scale)
scale = np.sort(scale)
xvern = []
for dim in scale:
notch_size = [dim * 5, dim * 25]
notch_spacing = dim * 10
num_notches = 5
notch_offset = dim
row_spacing = 0
layer1 = layers[0]
layer2 = layers[1]
cal=pg.litho_calipers(\
notch_size,\
notch_spacing,\
num_notches,\
notch_offset,\
row_spacing,\
layer1,\
layer2)
cal.flatten()
if reversed:
tobedel = cal.get_polygons(by_spec=(layer2, 0))
cal = cal.remove_polygons(
lambda pts, layer, datatype: layer == layer2)
replica = dl.Device()
replica.add(gdspy.PolygonSet(tobedel, layer=layer2))
frame = dl.Device()
frame.add(pg.bbox(replica.bbox, layer=layer2))
frame_ext = dl.Device()
frame_ext.add(
gdspy.PolygonSet(frame.copy('tmp', scale=1.5).get_polygons(),
layer=layer2))
frame_ext.flatten()
frame_ext.move(origin=frame_ext.center, destination=replica.center)
new_cal = pg.boolean(replica, frame_ext, 'xor', layer=layer2)
new_cal.rotate(angle=180,
center=(cal.xmin + cal.xsize / 2, cal.ymin))
new_cal.move(destination=(0, -notch_size[1]))
cal << new_cal
cal.flatten()
xvern.append(cal)
g = dl.Group(xvern)
g.distribute(direction='y', spacing=scale[-1] * 20)
g.align(alignment='x')
xcell = dl.Device(name="x")
for x in xvern:
xcell << x
xcell = pt.join(xcell)
vern_x = cell << xcell
vern_y = cell << xcell
vern_y.rotate(angle=-90)
vern_y.move(origin=(vern_y.xmin,vern_y.y),\
destination=(vern_x.x+scale[-1]*10,vern_x.ymin-scale[-1]*10))
cell.absorb(vern_x)
cell.absorb(vern_y)
label = pg.text(text=label, size=text_size, layer=layers[0])
label.move(destination=(cell.xmax - label.xsize / 2,
cell.ymax - 2 * label.ysize))
overlabel = pg.bbox(label.bbox, layer=layers[1])
overlabel_scaled = dl.Device().add(
gdspy.PolygonSet(overlabel.copy('tmp', scale=2).get_polygons(),
layer=layers[1]))
overlabel_scaled.move(origin=overlabel_scaled.center,\
destination=label.center)
cutlab = pg.boolean(label, overlabel_scaled, 'xor', layer=layers[1])
cell << label
cell << cutlab
cell = pt.join(cell)
return cell
def gen_gds(poly_coords: List[np.ndarray],
filepath: str,
extra_structures: List[np.ndarray] = None,
deembed: bool = True) -> None:
"""Generate GDS given a list of polygon coordinates.
Output GDS has units of microns and precision in nanometers.
Args:
poly_coords: List of polygon coordinates. Elements of list are
n x 2 numpy.ndarrays. Assumes coordinates in nanometers.
filepath: Name of the filepath to output gds file.
extra_structures: List of polygons to be added to the gds that are
not part of the levelset function.
deembed: Boolean to control if polygon deembeding will occur or not.
"""
poly_cell = gdspy.Cell("POLYGONS", exclude_from_current=True)
test_points = []
gds_polygons = []
# Convert polygon coordinates from nanometers to microns since
# output is in microns.
poly_coords = [np.array(poly) / NM_PER_UM for poly in poly_coords]
for polygon in poly_coords:
test_points.append(tuple(polygon[0]))
gds_polygons.append(gdspy.Polygon(polygon, 0))
if deembed:
containment_mx = []
for polygon in gds_polygons:
containment_mx.append(gdspy.inside(test_points, [polygon]))
# Subtract by identity matrix since polygon_i trivially contains
# polygon_i.
containment_mx = np.array(containment_mx) - np.eye(len(gds_polygons))
# overlap_list[i] tells how many polygons are contained in polygon i.
overlap_list = np.sum(containment_mx, axis=1)
overlap_num = 0
while sum(overlap_list) != 0:
overlap_num = overlap_num + 1
# We loop until there are no longer any more polygons of a specific
# overlap number before going to the next overlap number.
#
# The reasoning for this is as we begin to delete polygons,
# the overlap number changes and so polygons which were of
# overlap_num > 1, may become polygons of overlap_num = 1.
#
# np.where(overlap_list==overlap_num)[0].size is how we see if
# any polygons satisfy the current overlap number.
target_polys = np.where(overlap_list == overlap_num)[0]
while target_polys.size != 0:
# We iterate through each polygon in our polygon list until no
# polygon satisfies the current overlap number.
for i in target_polys[::-1]:
containment_list = np.nonzero(containment_mx[i, :])[0]
# Concatenate all the contained polygons to subtract out.
poly_list = sum(
[gds_polygons[j].polygons for j in containment_list],
[])
# Note that we had to turn precision from the default 1e-3
# to 1e-6 to avoid errors in the NOT operation.
gds_polygons[i] = gdspy.boolean(
gds_polygons[i],
gdspy.PolygonSet(poly_list),
"not",
layer=0,
precision=1e-6)
for j in containment_list:
gds_polygons[j] = None
test_points[j] = None
for k in range(len(gds_polygons) - 1, -1, -1):
if gds_polygons[k] is None:
del gds_polygons[k]
del test_points[k]
containment_mx = []
for polygon in gds_polygons:
containment_mx.append(gdspy.inside(test_points, [polygon]))
containment_mx = np.array(containment_mx) - np.eye(
len(gds_polygons))
overlap_list = np.sum(containment_mx, axis=1)
target_polys = np.where(overlap_list == overlap_num)[0]
for polygon in gds_polygons:
poly_cell.add(polygon)
if extra_structures is not None:
for extra_polygon in extra_structures:
poly_cell.add(gdspy.Polygon(extra_polygon, 0))
gdspy.write_gds(filepath, cells=[poly_cell], unit=1.0e-6, precision=1.0e-9)
def generate_multi_vt_gds(self) -> None:
"""
PDK GDS only contains SLVT cells.
This patch will generate the other 3(LVT, RVT, SRAM) VT GDS files.
"""
import gdspy # TODO: why did module import get lost above for some users?
self.logger.info("Generate GDS for Multi-VT cells")
orig_gds = os.path.join(
self.extracted_tarballs_dir,
"ASAP7_PDKandLIB.tar/ASAP7_PDKandLIB_v1p5/asap7libs_24.tar.bz2/asap7libs_24/gds/asap7sc7p5t_24.gds"
)
# load original_gds
asap7_original_gds = gdspy.GdsLibrary().read_gds(infile=orig_gds,
units='import')
original_cells = asap7_original_gds.cell_dict
# This is an extra cell in the original GDS that has no geometry inside
del original_cells['m1_template']
# required libs
multi_libs = {
"R": {
"lib": gdspy.GdsLibrary(),
"mvt_layer": None,
},
"L": {
"lib": gdspy.GdsLibrary(),
"mvt_layer": 98
},
"SL": {
"lib": gdspy.GdsLibrary(),
"mvt_layer": 97
},
"SRAM": {
"lib": gdspy.GdsLibrary(),
"mvt_layer": 110
},
}
# create new libs
for vt, multi_lib in multi_libs.items():
multi_lib['lib'].name = asap7_original_gds.name.replace('SL', vt)
for cell in original_cells.values():
poly_dict = cell.get_polygons(by_spec=True)
# extract polygon from layer 100(the boundary for cell)
boundary_polygon = poly_dict[(100, 0)]
for vt, multi_lib in multi_libs.items():
mvt_layer = multi_lib['mvt_layer']
if mvt_layer:
# copy boundary_polygon to mvt_layer to mark the this cell is a mvt cell.
mvt_polygon = gdspy.PolygonSet(boundary_polygon,
multi_lib['mvt_layer'], 0)
mvt_cell = cell.copy(name=cell.name.replace('SL', vt),
exclude_from_current=True,
deep_copy=True).add(mvt_polygon)
else:
# RVT, just copy the cell
mvt_cell = cell.copy(name=cell.name.replace('SL', vt),
exclude_from_current=True,
deep_copy=True)
# add mvt_cell to corresponding multi_lib
multi_lib['lib'].add(mvt_cell)
for vt, multi_lib in multi_libs.items():
# write multi_lib
multi_lib['lib'].write_gds(
os.path.splitext(orig_gds)[0] + '_' + vt + '.gds')
def generate_3jj(self):
contact_pad_a_outer = 10.5
contact_pad_b_outer = 3
self.contact_pad_b_outer = contact_pad_b_outer
self.contact_pad_a_outer = contact_pad_a_outer
contact_pad_a_inner = 7.5
contact_pad_b_inner = 1
self._x0 = self.center[0]
self._y0 = self.center[
1] - self.length - self.s / 2 + self.contact_pad_b_outer
self._parametr1 = 10 #Hb
self._parametr2 = self.jj['side_r_thick']
self._parametr3 = self.jj['up_l_thick']
self._parametr4 = self.jj['side_l_thick']
self._parametr5 = self.jj['side_r_thick']
# Add contact pad1
points0 = [
(self._x0 - contact_pad_a_outer / 2,
self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_outer / 2, self._y0),
(self._x0 + contact_pad_a_outer / 2, self._y0),
(self._x0 + contact_pad_a_outer / 2,
self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_outer / 2,
self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 -
contact_pad_b_inner),
(self._x0 + contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 -
contact_pad_b_inner),
(self._x0 + contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 -
contact_pad_b_inner),
]
x1 = self._x0
y1 = self._y0 - contact_pad_b_outer
# parametr1=H_b
H_a = 0.5 # 1
H_b = self._parametr1
L_a = 6 # 10.7
L_b = 0.75
h = 0.16 # 0.5
points1 = [(x1 - 3 * H_a, y1 - H_b / 2), (x1 + H_a, y1 - H_b / 2),
(x1 + H_a, y1 - H_b / 2 - self._parametr4),
(x1 - 2 * H_a, y1 - H_b / 2 - self._parametr4),
(x1 - 2 * H_a, y1 - H_b), (x1 - 3 * H_a, y1 - H_b)]
points1_1 = [(x1 - H_a, y1), (x1 - H_a / 4, y1),
(x1 - H_a / 4, y1 - H_b / 3),
(x1 - H_a + self._parametr3, y1 - H_b / 3),
(x1 - H_a + self._parametr3, y1 - H_b / 2 + h),
(x1 - H_a, y1 - H_b / 2 + h)]
x2 = x1
y2 = y1 - H_b
points2 = [(x2 - L_a / 2, y2), (x2 + L_a / 2, y2),
(x2 + L_a / 2, y2 - L_b), (x2 - L_a / 2, y2 - L_b)]
H1_a = 0.8
H1_b = 2
H2_a = 0.8
H2_b = 2
x3 = x2 - L_a / 2 + H1_a / 2
y3 = y2 - L_b
x4 = x2 + L_a / 2 - H1_a / 2
y4 = y2 - L_b
points3 = [(x3 - H1_a / 2, y3), (x3 + H1_a / 2, y3),
(x3 + H1_a / 2, y3 - 2 * H1_b),
(x3 - H1_a / 2, y3 - 2 * H1_b)]
points4 = [(x4 - H2_a / 2, y4), (x4 + H2_a / 2, y4),
(x4 + H2_a / 2, y4 - H2_b), (x4 - H2_a / 2, y4 - H2_b)]
x5 = x3 + H1_a / 2
y5 = y3 - H1_b
x6 = x4 - H2_a / 2
y6 = y4 - H2_b
# parametr2=pad1_a
# parametr3=pad2_a
pad1_a = self._parametr3
pad1_b = 3
pad2_a = self._parametr2
pad2_b = 3
points5_for_pad1 = [(x5, y5), (x5, y5 - pad1_b),
(x5 - pad1_a, y5 - pad1_b), (x5 - pad1_a, y5)]
points6_for_pad2 = [(x6, y6), (x6 + pad2_a, y6),
(x6 + pad2_a, y6 - pad2_b), (x6, y6 - pad2_b)]
contact_pad1_a_outer = 13
contact_pad1_b_outer = 6.4
contact_pad1_a_inner = 12
contact_pad1_b_inner = 5.8
x7 = self._x0
y7 = self._y0 - contact_pad_b_outer - H_b - L_b - H1_b - pad1_b - h - contact_pad1_b_outer
x7_ = x7
y7_ = y7 + (contact_pad1_b_outer - contact_pad1_b_inner)
points7 = [
(x7 - contact_pad1_a_outer / 2, y7 + contact_pad1_b_outer),
(x7 - contact_pad1_a_outer / 2, y7),
(x7 + contact_pad1_a_outer / 2, y7),
(x7 + contact_pad1_a_outer / 2, y7 + contact_pad1_b_outer),
(x7_ + contact_pad1_a_inner / 2, y7_ + contact_pad1_b_inner),
(x7_ + contact_pad1_a_inner / 2, y7_),
(x7_ - contact_pad1_a_inner / 2, y7_),
(x7_ - contact_pad1_a_inner / 2, y7_ + contact_pad1_b_inner)
]
x8 = x7_ - contact_pad1_a_inner / 2
y8 = y7_ + contact_pad1_b_inner
x9 = x7_ + contact_pad1_a_inner / 2
y9 = y7_ + contact_pad1_b_inner
# parametr4=pad3_b
# parametr5=pad4_b
pad3_a = 4.5 # 2.5
pad3_b = self._parametr4
pad4_a = 4.5 # 2.5
pad4_b = self._parametr5
points8_for_pad3 = [(x8, y8), (x8 + pad3_a, y8),
(x8 + pad3_a, y8 - pad3_b), (x8, y8 - pad3_b)]
points9_for_pad4 = [(x9 - pad4_a, y9), (x9, y9), (x9, y9 - pad4_b),
(x9 - pad4_a, y9 - pad4_b)]
delta = 6
x10 = x7 - contact_pad1_a_outer / 2
y10 = y7 + delta
x11 = x7 + contact_pad1_a_outer / 2
y11 = y7 + delta
L1_a = 2.1
L1_b = 1
L2_a = 2.1
L2_b = 1
rec1_a_outer = 4.8
rec1_b_outer = 2.8
rec1_a_inner = 2
rec1_b_inner = 1
rec2_a_outer = rec1_a_outer
rec2_b_outer = rec1_b_outer
rec2_a_inner = rec1_a_inner
rec2_b_inner = rec1_b_inner
self.rect_size_a = rec1_a_outer
self.rect_size_b = rec1_b_outer
points10 = [(x10 - L1_a, y10), (x10, y10), (x10, y10 - L1_b),
(x10 - L1_a, y10 - L1_b)]
points11 = [(x11, y11), (x11 + L2_a, y11), (x11 + L2_a, y11 - L2_b),
(x11, y11 - L2_b)]
x12 = x10 - L1_a - (rec1_a_outer / 2)
y12 = y10 - L1_b / 2 + (rec1_b_outer / 2)
x13 = x11 + L2_a + (rec2_a_outer / 2)
y13 = y11 - L2_b / 2 + (rec2_b_outer / 2)
self.rect1 = (x12, y12)
self.rect2 = (x13, y13)
points12 = [
(x12 - rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_outer / 2, y12),
(x12 + rec1_a_outer / 2, y12),
(x12 + rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_inner / 2,
y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
(x12 + rec1_a_inner / 2,
y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
(x12 + rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2),
(x12 - rec1_a_inner / 2,
y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
]
points13 = [
(x13 - rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_outer / 2, y13),
(x13 + rec2_a_outer / 2, y13),
(x13 + rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_inner / 2,
y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
(x13 + rec2_a_inner / 2,
y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
(x13 + rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2),
(x13 - rec2_a_inner / 2,
y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
]
squid = gdspy.PolygonSet([
points0, points1, points1_1, points2, points3, points4,
points5_for_pad1, points6_for_pad2, points7, points8_for_pad3,
points9_for_pad4, points10, points11, points12, points13
])
jj = gdspy.boolean(squid,
squid,
"or",
layer=self.layer_configuration.jj_layer)
if self.jjpos == 'up':
jj = jj.rotate(np.pi, self.center)
elif self.jjpos == 'left':
jj = jj.rotate(-np.pi / 2, self.center)
elif self.jjpos == 'right':
jj = jj.rotate(np.pi / 2, self.center)
return jj
def test_translate():
ps = gdspy.PolygonSet([[(0, 0), (1, 0), (1, 2), (0, 2)]])
ps.translate(-1, -2)
tgt = gdspy.PolygonSet([[(-1, -2), (0, -2), (0, 0), (-1, 0)]])
assertsame(gdspy.Cell("test").add(ps), gdspy.Cell("TGT").add(tgt))
######################################################################
import gdspy
import numpy
lib = gdspy.GdsLibrary("TESTLIB", unit=1, precision=1e-7)
### PolygonSet
cell = lib.new_cell("PolygonSet")
p = gdspy.PolygonSet(
[
[(10, 0), (11, 0), (10, 1)],
[(11, 0), (10, 1), (11, 1)],
[(11, 1), (12, 1), (11, 2)],
],
1,
2,
)
cell.add(p)
cell = lib.new_cell("PolygonSet_fillet")
orig = gdspy.PolygonSet([
[
(0, 0),
(-1, 0),
(0, -1),
(0.5, -0.5),
(1, 0),
squareOffset = 10 + 5 + 35 / 2
bottomSquare = gdspy.Rectangle((-35 / 2, -35 / 2), (35 / 2, 35 / 2), layer=2)
bottomSquareTR = gdspy.copy(bottomSquare)
bottomSquareTR.translate(squareOffset, squareOffset)
bottomSquareTL = gdspy.copy(bottomSquare)
bottomSquareTL.translate(-squareOffset, squareOffset)
bottomSquareBR = gdspy.copy(bottomSquare)
bottomSquareBR.translate(squareOffset, -squareOffset)
bottomSquareBL = gdspy.copy(bottomSquare)
bottomSquareBL.translate(-squareOffset, -squareOffset)
bottomMark = gdspy.Cell('Bottom Mark')
bottomMark.add(bottomSquareTR)
bottomMark.add(bottomSquareTL)
bottomMark.add(bottomSquareBR)
bottomMark.add(bottomSquareBL)
bottomMarkRight = gdspy.PolygonSet(bottomMark.get_polygons(), layer=2)
bottomMarkLeft = gdspy.copy(bottomMarkRight)
bottomMarkRight.translate(markOffset, 0)
bottomMarkLeft.translate(-markOffset, 0)
cell.add(bottomMarkLeft)
cell.add(bottomMarkRight)
# SAVE THE FILE
lib.write_gds('aml_marks.gds')
gdspy.LayoutViewer(lib)
def union(parts_list):
union = gdspy.PolygonSet([])
for p in parts_list:
union = gdspy.boolean(union, p, 'or')
return union
bool_path.segment(30, '+x')
bool_path.turn(10, 'r', number_of_points=64)
bool_path.segment(30, '-y')
bool_path.turn(10, 'r', number_of_points=64)
bool_path.segment(30, '-x')
bool_path.turn(10, 'r', number_of_points=64)
## Ring inside the square path.
ring = gdspy.Round((25, 25),
25 + width * 0.5,
inner_radius=25 - width * 0.5,
number_of_points=256)
## We create a PolygonSet that contains both our path segments and
## ring, and then append it to our list of operands.
primitives.append(gdspy.PolygonSet(bool_path.polygons + ring.polygons))
## The list of operands contains 2 polygon sets. We will subtract the
## 1st (narrower) from the 2nd (wider). For that we need to define a
## function that receives 2 integers (each representing an operand) and
## returns the operation we want executed. Here we use a lambda
## expression to do so.
subtraction = lambda p1, p2: p2 and not p1
## We perform the operation, put the resulting polygons in layer 1, and
## add to our boolean cell.
bool_cell.add(gdspy.boolean(primitives, subtraction, max_points=199, layer=1))
## ------------------------------------------------------------------ ##
## POLYGON OFFSET
## ------------------------------------------------------------------ ##
params = qd.Params(yaml.load(f, yaml.CSafeLoader))
## These should probably be put in parameters.yaml
n = params['evaporation.junctions.number']
overlap = params['evaporation.junctions.overlap'] # lx, ly, junction size
wire = params['evaporation.junctions.wire'] # lx, ly, connecting piece between junctions
undercut = params['evaporation.junctions.undercut'] # undercut for wires
undercut_after_JJ = params['evaporation.junctions.undercut_after_JJ'] # undercut after junction
dose_layers = [1, 2]
evap_layers = params['evaporation.layers']
junction_array = JunctionArray(n, overlap, wire, undercut)
chip.add_component(junction_array, cid='JJArray', layers=dose_layers)
## Simulate Evaporation
polys = junction_array.get_polygons(by_spec=True)
highdose = gdspy.PolygonSet(polys[(dose_layers[0], 0)])
lowdose = gdspy.PolygonSet(polys[(dose_layers[1], 0)])
evaporated = qj.simulate_evaporation(
lowdose, highdose, **params['evaporation']
)
for i, (layer, evap) in enumerate(zip(evap_layers, evaporated)):
chip.add_component(evap, f'evap_{i}', layers=layer)
cells = chip.render(name='jj_array', draw_border=False)
lib.write_gds('jj_array_test.gds', cells=cells)
cpwfeed.straight(250, widthEnd = 10, gapEnd = 5)
cpwfeed.straight(250)
cpwfeed.bend(150, 'l')
cpwfeed.bend(150, 'r')
cpwfeed.straight(2500 - 1000 - 3*150)
cpwfeed.bend(150, 'r')
cpwfeed.straight(8200)
cpwfeed.bend(150, 'r')
cpwfeed.straight(2500 - 1000 - 3*150)
cpwfeed.bend(150, 'r')
cpwfeed.bend(150, 'l')
cpwfeed.straight(250)
cpwfeed.straight(250, widthEnd = 300, gapEnd = 150)
cpwfeed.straight(250)
cpwfeed.openGap(150)
gdslib.addPolyToCell(gdspy.PolygonSet(cpwfeed.path.polygons), device)
# BOTTOM RESONATOR ARRAY
f = linspace(6E9,6.1E9,6) # Fundamental frequency
l4 = c/sqrt(ereff)/4./f*1E6 # length for lambda/4 resonator
print(l4)
for i in range(0,5):
totalLength = l4[i]
openDis = 10
capDist = 10*(1+i)
cpwSrtExtend = 200
bendRad = 100
meanderLen = totalLength - openDis - capDist - cpwSrtExtend - pi*bendRad
exec("cpw" + str(i) + " = gdslib.CPWPath(10,5,layer = 6)")
exec("cpw" + str(i) + ".start([1900+ 625 + 1250*" + str(i) + ",2500 - 25],'+x')")
def XI(W, S, tl=37, bl=33, ext=None):
'''
Generate XI crossover
W : Width of the metal track.
S : Spacing between the metal tracks.
tl : Upper metal layer number.
The default of 37 is the top metal layer of the MOCMOS technology.
This is convenient when using 'Electric' to view the resulting GDS.
bl : Lower metal layer number.
The default of 33 is the 2nd metal layer of the MOCMOS technology.
This is convenient when using 'Electric' to view the resulting GDS.
ext : GDS cell name of the width to use.
'''
##########################
# Some initial constants #
##########################
Stanz = S * np.tan(np.pi / 8)
Wtanz = W * np.tan(np.pi / 8)
SdSqr2 = S / np.sqrt(2)
WdSqr2 = W / np.sqrt(2)
SpWd2 = S + W / 2
############################################################################
# If 'ext' = None, then the natural width of the crossover is used. #
# When 'ext' = 'XX' for example, the 'XI' width is extended to 'XX' width. #
############################################################################
if ext == None:
edge_x = SpWd2 + WdSqr2 + W + Stanz
else:
CO = gdspy.CellReference(ext)
edge_x = CO.get_bounding_box()[1][0]
#############################
# Points for 'XI' structure #
#############################
A3x = SpWd2 + WdSqr2 - Wtanz
A3y = SpWd2 + W
B3x = edge_x
B3y = A3y
C3x = B3x
C3y = SpWd2
D3x = SpWd2 + WdSqr2
D3y = C3y
E3x = SdSqr2 + W / 2 + Wtanz
E3y = W / 2
F3x = B3x
F3y = W / 2
G3x = B3x
G3y = -W / 2
H3x = SdSqr2 + W / 2
H3y = -W / 2
I3x = H3x - Stanz
I3y = -SpWd2
L3x = I3x - Wtanz
L3y = -SpWd2 - W
J3x = B3x
J3y = I3y
K3x = B3x
K3y = L3y
######################################################
# Collect points of 'XI' into list of list of tuples #
######################################################
######################################################
# Top of the 'XI' structure #
# The two lower right to upper left crossover -\_ #
######################################################
xtop = [[], []]
xtop[0].append((E3x, E3y))
xtop[0].append((F3x, F3y))
xtop[0].append((G3x, G3y))
xtop[0].append((H3x, H3y))
xtop[0].append((-1.0 * I3x, -1.0 * I3y))
xtop[0].append((-1.0 * J3x, -1.0 * J3y))
xtop[0].append((-1.0 * K3x, -1.0 * K3y))
xtop[0].append((-1.0 * L3x, -1.0 * L3y))
xtop[1].append((I3x, I3y))
xtop[1].append((J3x, J3y))
xtop[1].append((K3x, K3y))
xtop[1].append((L3x, L3y))
xtop[1].append((-1.0 * E3x, -1.0 * E3y))
xtop[1].append((-1.0 * F3x, -1.0 * F3y))
xtop[1].append((-1.0 * G3x, -1.0 * G3y))
xtop[1].append((-1.0 * H3x, -1.0 * H3y))
#############################################
# Bottom of the 'XI' structure #
# Upper right to lower left crossover _/- #
#############################################
xbot = []
xbot.append((A3x, A3y))
xbot.append((B3x, B3y))
xbot.append((C3x, C3y))
xbot.append((D3x, D3y))
xbot.append((-1.0 * A3x, -1.0 * A3y))
xbot.append((-1.0 * B3x, -1.0 * B3y))
xbot.append((-1.0 * C3x, -1.0 * C3y))
xbot.append((-1.0 * D3x, -1.0 * D3y))
###################################
# Generate 'XI' crossover polygon #
###################################
XI_Shapes = []
XI_Shapes.append(gdspy.PolygonSet(xtop, tl))
XI_Shapes.append(gdspy.Polygon(xbot, bl))
######################################
# Create GDS cell for 'XI' crossover #
######################################
XI = gdspy.Cell('XI', exclude_from_current=False)
###########################################
# Add the 'XI' polygons into the GDS cell #
###########################################
for shape in XI_Shapes:
XI.add(shape)
########################
# Add via to crossover #
########################
#######################################################################
# Use cell 'VIA_ARR' generated by function 'VIA' as the via structure #
#######################################################################
#via locations
via_3l = [(edge_x - W / 2, (S + W)), (-(edge_x - W / 2), -(S + W))]
for v_loc in via_3l:
VIA = gdspy.CellReference('VIA_ARR')
VIA.translate(v_loc[0], v_loc[1])
XI.add(VIA)
#End of adding via
XI.flatten()
#End of 'XI' crossover generation
####################################################
# Generate a mirrored version of 'XI' called 'XIM' #
####################################################
XI_ref = gdspy.CellReference('XI', (0, 0), x_reflection=True)
XIM = gdspy.Cell('XIM', exclude_from_current=False)
XIM.add(XI_ref).flatten()
"xor",
precision=0.1 * tolerance,
max_points=0,
).polygons[0]
break
elif gdspy.inside(polys[i][:1], [poly],
precision=0.1 * tolerance)[0]:
p = polys.pop(i)
poly = gdspy.boolean(
[p],
[poly],
"xor",
precision=0.1 * tolerance,
max_points=0,
).polygons[0]
i -= 1
xmax = max(xmax, poly[:, 0].max())
polys.append(poly)
return polys
if __name__ == "__main__":
fp = FontProperties(family="serif", style="italic")
text = gdspy.PolygonSet(render_text("Text rendering", 10, font_prop=fp),
layer=1)
lib = gdspy.GdsLibrary()
cell = lib.new_cell("TXT")
cell.add(text)
lib.write_gds("fonts.gds")
gdspy.LayoutViewer(lib)
def generate_jj(self):
contact_pad_a_outer = 10.5
contact_pad_b_outer = 3
self.contact_pad_b_outer = contact_pad_b_outer
self.contact_pad_a_outer = contact_pad_a_outer
contact_pad_a_inner = 7.5
contact_pad_b_inner = 1
# Add contact pad1
points0 = [(self._x0 - contact_pad_a_outer / 2, self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_outer / 2, self._y0),
(self._x0 + contact_pad_a_outer / 2, self._y0),
(self._x0 + contact_pad_a_outer / 2, self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_outer / 2, self._y0 - contact_pad_b_outer),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 - contact_pad_b_inner),
(self._x0 + contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 - contact_pad_b_inner),
(self._x0 + contact_pad_a_inner / 2, self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2),
(self._x0 - contact_pad_a_inner / 2, self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2),
(self._x0 - contact_pad_a_inner / 2,
self._y0 - (contact_pad_b_outer - contact_pad_b_inner) / 2 - contact_pad_b_inner),
]
x1 = self._x0
y1 = self._y0 - contact_pad_b_outer
# parametr1=H_b
H_a = 1
H_b = self._parametr1
L_a = 10.7
L_b = 0.75
points1 = [(x1 - H_a / 2, y1),
(x1 + H_a / 2, y1),
(x1 + H_a / 2, y1 - H_b),
(x1 - H_a / 2, y1 - H_b)
]
x2 = x1
y2 = y1 - H_b
points2 = [(x2 - L_a / 2, y2),
(x2 + L_a / 2, y2),
(x2 + L_a / 2, y2 - L_b),
(x2 - L_a / 2, y2 - L_b)
]
H1_a = 0.8
H1_b = 2
H2_a = 0.8
H2_b = 2
x3 = x2 - L_a / 2 + H1_a / 2
y3 = y2 - L_b
x4 = x2 + L_a / 2 - H1_a / 2
y4 = y2 - L_b
points3 = [(x3 - H1_a / 2, y3),
(x3 + H1_a / 2, y3),
(x3 + H1_a / 2, y3 - H1_b),
(x3 - H1_a / 2, y3 - H1_b)
]
points4 = [(x4 - H2_a / 2, y4),
(x4 + H2_a / 2, y4),
(x4 + H2_a / 2, y4 - H2_b),
(x4 - H2_a / 2, y4 - H2_b)
]
x5 = x3 + H1_a / 2
y5 = y3 - H1_b
x6 = x4 - H2_a / 2
y6 = y4 - H2_b
# parametr2=pad1_a
# parametr3=pad2_a
pad1_a = self._parametr2
pad1_b = 3
pad2_a = self._parametr2
pad2_b = 3
points5_for_pad1 = [(x5, y5),
(x5, y5 - pad1_b),
(x5 - pad1_a, y5 - pad1_b),
(x5 - pad1_a, y5)
]
points6_for_pad2 = [(x6, y6),
(x6 + pad2_a, y6),
(x6 + pad2_a, y6 - pad2_b),
(x6, y6 - pad2_b)
]
contact_pad1_a_outer = 13
contact_pad1_b_outer = 6.4
contact_pad1_a_inner = 12
contact_pad1_b_inner = 5.8
h = 0.5
x7 = self._x0
y7 = self._y0 - contact_pad_b_outer - H_b - L_b - H1_b - pad1_b - h - contact_pad1_b_outer
x7_ = x7
y7_ = y7 + (contact_pad1_b_outer - contact_pad1_b_inner)
points7 = [(x7 - contact_pad1_a_outer / 2, y7 + contact_pad1_b_outer),
(x7 - contact_pad1_a_outer / 2, y7),
(x7 + contact_pad1_a_outer / 2, y7),
(x7 + contact_pad1_a_outer / 2, y7 + contact_pad1_b_outer),
(x7_ + contact_pad1_a_inner / 2, y7_ + contact_pad1_b_inner),
(x7_ + contact_pad1_a_inner / 2, y7_),
(x7_ - contact_pad1_a_inner / 2, y7_),
(x7_ - contact_pad1_a_inner / 2, y7_ + contact_pad1_b_inner)]
x8 = x7_ - contact_pad1_a_inner / 2
y8 = y7_ + contact_pad1_b_inner
x9 = x7_ + contact_pad1_a_inner / 2
y9 = y7_ + contact_pad1_b_inner
# parametr4=pad3_b
# parametr5=pad4_b
pad3_a = 2.5
pad3_b = self._parametr4
pad4_a = 2.5
pad4_b = self._parametr5
points8_for_pad3 = [(x8, y8),
(x8 + pad3_a, y8),
(x8 + pad3_a, y8 - pad3_b),
(x8, y8 - pad3_b)]
points9_for_pad4 = [(x9 - pad4_a, y9),
(x9, y9),
(x9, y9 - pad4_b),
(x9 - pad4_a, y9 - pad4_b)]
delta = 6
x10 = x7 - contact_pad1_a_outer / 2
y10 = y7 + delta
x11 = x7 + contact_pad1_a_outer / 2
y11 = y7 + delta
L1_a = 2.1
L1_b = 1
L2_a = 2.1
L2_b = 1
rec1_a_outer = 4.8
rec1_b_outer = 2.8
rec1_a_inner = 2
rec1_b_inner = 1
rec2_a_outer = rec1_a_outer
rec2_b_outer = rec1_b_outer
rec2_a_inner = rec1_a_inner
rec2_b_inner = rec1_b_inner
self.rect_size_a = rec1_a_outer
self.rect_size_b = rec1_b_outer
points10 = [(x10 - L1_a, y10),
(x10, y10),
(x10, y10 - L1_b),
(x10 - L1_a, y10 - L1_b)]
points11 = [(x11, y11),
(x11 + L2_a, y11),
(x11 + L2_a, y11 - L2_b),
(x11, y11 - L2_b)]
x12 = x10 - L1_a - (rec1_a_outer / 2)
y12 = y10 - L1_b / 2 + (rec1_b_outer / 2)
x13 = x11 + L2_a + (rec2_a_outer / 2)
y13 = y11 - L2_b / 2 + (rec2_b_outer / 2)
self.rect1 = (x12, y12)
self.rect2 = (x13, y13)
points12 = [(x12 - rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_outer / 2, y12),
(x12 + rec1_a_outer / 2, y12),
(x12 + rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_outer / 2, y12 - rec1_b_outer),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
(x12 + rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
(x12 + rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2),
(x12 - rec1_a_inner / 2, y12 - (rec1_b_outer - rec1_b_inner) / 2 - rec1_b_inner),
]
points13 = [(x13 - rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_outer / 2, y13),
(x13 + rec2_a_outer / 2, y13),
(x13 + rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_outer / 2, y13 - rec2_b_outer),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
(x13 + rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
(x13 + rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2),
(x13 - rec2_a_inner / 2, y13 - (rec2_b_outer - rec2_b_inner) / 2 - rec2_b_inner),
]
squid = gdspy.PolygonSet([points0, points1, points2, points3, points4, points5_for_pad1, points6_for_pad2,
points7, points8_for_pad3, points9_for_pad4, points10, points11, points12, points13])
return squid
import numpy as np
import gdspy
from gdsCAD import *
from matplotlib.font_manager import FontProperties
from matplotlib.textpath import TextPath
import fonts
from fonts import *
a = core.Boundary(
[[(0.0, 0.0), (1.0, 0.0), (1.0, 1.0),
(0.0, 1.0)], [(0.0, 0.0), (0.5, 0.0), (0.5, 0.5), (0.0, 0.5)]],
layer=1)
b = gdspy.PolygonSet(
[[(0.0, 0.0), (2.0, 0.0), (2.0, 2.0),
(0.0, 2.0)], [(0.0, 0.0), (3.0, 0.0), (3.0, 3.0), (0.0, 3.0)]],
layer=1)
c = gdspy.PolygonSet(a.points, layer=1)
d = core.Boundary(b.polygons, layer=1)
def cadply(ply, ly):
return gdspy.Polygon([list(i) for i in ply], layer=ly)
#end
def pypol2bdy(plst, ly):
return core.Boundary(plst.polygons, layer=ly)
#end
def ply_area(self):
ply = gdspy.PolygonSet(self.shape.points)
return ply.area()
def test_mirror():
ps = gdspy.PolygonSet([[(0, 0), (1, 0), (1, 2), (0, 2)]])
ps.mirror((-1, 1), (1, -1))
tgt = gdspy.PolygonSet([[(0, 0), (-2, 0), (-2, -1), (0, -1)]])
assertsame(gdspy.Cell("test").add(ps), gdspy.Cell("TGT").add(tgt))
def test_fillet(target):
cell = gdspy.Cell("test")
orig = gdspy.PolygonSet(
[
[
(0, 0),
(-1, 0),
(0, -1),
(0.5, -0.5),
(1, 0),
(1, 1),
(4, -1),
(1, 3),
(1, 2),
(0, 1),
],
[(2, -1), (3, -1), (2.5, -2)],
]
)
orig.datatypes = [0, 1]
p = gdspy.copy(orig, 0, 5)
p.layers = [1, 1]
p.fillet(0.3, max_points=0)
cell.add(p)
p = gdspy.copy(orig, 5, 5)
p.layers = [2, 2]
p.fillet(
[0.3, 0.2, 0.1, 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.4, 0.1, 0.2, 0], max_points=0
)
cell.add(p)
p = gdspy.copy(orig, 5, 0)
p.layers = [3, 3]
p.fillet(
[[0.1, 0.1, 0.4, 0, 0.4, 0.1, 0.1, 0.4, 0.4, 0.1], [0.2, 0.2, 0.5]],
max_points=0,
)
cell.add(p)
p = gdspy.PolygonSet(
[
[
(0, 0),
(0, 0),
(-1, 0),
(0, -1),
(0.5, -0.5),
(1, 0),
(1, 0),
(1, 1),
(4, -1),
(1, 3),
(1, 2),
(0, 1),
],
[(2, -1), (3, -1), (2.5, -2), (2, -1)],
],
layer=4,
)
p.datatypes = [0, 1]
p.fillet([0.8, [10.0, 10.0, 20.0, 20.0]], max_points=199, precision=1e-6)
cell.add(p)
assertsame(cell, target["PolygonSet_fillet"], tolerance=1e-3)
