def _create_pga(self):
sbs = wx.StaticBoxSizer(wx.StaticBox(self.panel), wx.VERTICAL)
form.quantized_slider_field(parent=self.panel, sizer=sbs, label="PGA",
weight=3, range=self.subdev.gain_range(),
callback=self.subdev.set_gain)
self.vbox.Add(sbs, 0, wx.EXPAND)
def _create_pga(self):
sbs = wx.StaticBoxSizer(wx.StaticBox(self.panel), wx.VERTICAL)
form.quantized_slider_field(parent=self.panel,
sizer=sbs,
label="PGA",
weight=3,
range=self.subdev.gain_range(),
callback=self.subdev.set_gain)
self.vbox.Add(sbs, 0, wx.EXPAND)
def _build_gui(self, vbox, usrp_rate, audio_rate): def _form_set_freq(kv): return self.set_freq(kv['freq']) if 1: self.fft = fftsink2.fft_sink_f (self.panel, title="Post FM Demod", fft_size=512, sample_rate=usrp_rate, y_per_div=10, ref_level=0) self.connect (self.fm_demod, self.fft) vbox.Add (self.fft.win, 4, wx.EXPAND) if 0: self.scope = scopesink2.scope_sink_f(self.panel, title="RDS timedomain", sample_rate=usrp_rate, num_inputs=2) self.connect (self.rds_bb_filter, (rds_scope,1)) self.connect (self.rds_clock, (rds_scope,0)) vbox.Add(self.scope.win, 4, wx.EXPAND) self.rdspanel = rdsPanel(self.msgq, self.panel) vbox.Add(self.rdspanel, 1, wx.EXPAND|wx.TOP|wx.BOTTOM, 20) # control area form at bottom self.myform = form.form() # 1st line hbox = wx.BoxSizer(wx.HORIZONTAL) self.myform.btn_down = wx.Button(self.panel, -1, "<<") self.myform.btn_down.Bind(wx.EVT_BUTTON, self.Seek_Down) hbox.Add(self.myform.btn_down, 0) self.myform['freq'] = form.float_field( parent=self.panel, sizer=hbox, label="Freq", weight=0, callback=self.myform.check_input_and_call(_form_set_freq, self._set_status_msg)) hbox.Add((5,0), 0) self.myform.btn_up = wx.Button(self.panel, -1, ">>") self.myform.btn_up.Bind(wx.EVT_BUTTON, self.Seek_Up) hbox.Add(self.myform.btn_up, 0) self.myform['freq_slider'] = form.quantized_slider_field( parent=self.panel, sizer=hbox, weight=3, range=(87.5e6, 108e6, 0.1e6), callback=self.set_freq) hbox.Add((5,0), 0) vbox.Add(hbox, 0, wx.EXPAND) # 2nd line hbox = wx.BoxSizer(wx.HORIZONTAL) hbox.Add((5,0), 0) self.myform['volume'] = form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume", weight=3, range=self.volume_range(), callback=self.set_vol) hbox.Add((5,0), 1) self.myform['gain'] = form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain", weight=3, range=self.subdev.gain_range(), callback=self.set_gain) hbox.Add((5,0), 0) vbox.Add(hbox, 0, wx.EXPAND)
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 0:
self.src_fft = fftsink2.fft_sink_c(self.panel,
title="Data from USRP",
fft_size=512,
sample_rate=usrp_rate,
ref_scale=32768.0,
ref_level=0.0,
y_divs=12)
self.connect(self.u, self.src_fft)
vbox.Add(self.src_fft.win, 4, wx.EXPAND)
if 0:
self.post_filt_fft = fftsink2.fft_sink_c(
self.panel,
title="Post Channel filter",
fft_size=512,
sample_rate=demod_rate)
self.connect(self.chan_filt, self.post_filt_fft)
vbox.Add(self.post_filt_fft.win, 4, wx.EXPAND)
if 0:
post_demod_fft = fftsink2.fft_sink_f(self.panel,
title="Post Demod",
fft_size=1024,
sample_rate=demod_rate,
y_per_div=10,
ref_level=0)
self.connect(self.am_demod, post_demod_fft)
vbox.Add(post_demod_fft.win, 4, wx.EXPAND)
if 1:
audio_fft = fftsink2.fft_sink_f(self.panel,
title="Audio",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=20)
self.connect(self.audio_filt, audio_fft)
vbox.Add(audio_fft.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=hbox,
label="Freq",
weight=1,
callback=myform.check_input_and_call(
_form_set_freq,
self._set_status_msg))
hbox.Add((5, 0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(520.0e3, 1611.0e3, 1.0e3),
callback=self.set_freq)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_vol)
hbox.Add((5, 0), 1)
g = self.u.get_gain_range()
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_gain)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE(self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON(self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv["freq"])
if 1:
self.src_fft = fftsink2.fft_sink_c(
self.panel,
title="Data from USRP",
fft_size=512,
sample_rate=usrp_rate,
ref_scale=32768.0,
ref_level=0,
y_divs=12,
)
self.connect(self.u, self.src_fft)
vbox.Add(self.src_fft.win, 4, wx.EXPAND)
if 1:
post_fm_demod_fft = fftsink2.fft_sink_f(
self.panel, title="Post FM Demod", fft_size=512, sample_rate=demod_rate, y_per_div=10, ref_level=0
)
self.connect(self.guts.fm_demod, post_fm_demod_fft)
vbox.Add(post_fm_demod_fft.win, 4, wx.EXPAND)
if 0:
post_stereo_carrier_generator_fft = fftsink2.fft_sink_c(
self.panel,
title="Post Stereo_carrier_generator",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=0,
)
self.connect(self.guts.stereo_carrier_generator, post_stereo_carrier_generator_fft)
vbox.Add(post_stereo_carrier_generator_fft.win, 4, wx.EXPAND)
if 0:
post_deemphasis_left = fftsink2.fft_sink_f(
self.panel,
title="Post_Deemphasis_Left",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=0,
)
self.connect(self.guts.deemph_Left, post_deemphasis_left)
vbox.Add(post_deemphasis_left.win, 4, wx.EXPAND)
if 0:
post_deemphasis_right = fftsink2.fft_sink_f(
self.panel,
title="Post_Deemphasis_Right",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=-20,
)
self.connect(self.guts.deemph_Left, post_deemphasis_right)
vbox.Add(post_deemphasis_right.win, 4, wx.EXPAND)
if 0:
LmR_fft = fftsink2.fft_sink_f(
self.panel, title="LmR", fft_size=512, sample_rate=audio_rate, y_per_div=10, ref_level=-20
)
self.connect(self.guts.LmR_real, LmR_fft)
vbox.Add(LmR_fft.win, 4, wx.EXPAND)
if 0:
self.scope = scopesink2.scope_sink_f(self.panel, sample_rate=demod_rate)
self.connect(self.guts.fm_demod_a, self.scope)
vbox.Add(self.scope.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform["freq"] = form.float_field(
parent=self.panel,
sizer=hbox,
label="Freq",
weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg),
)
hbox.Add((5, 0), 0)
myform["freq_slider"] = form.quantized_slider_field(
parent=self.panel, sizer=hbox, weight=3, range=(87.9e6, 108.1e6, 0.1e6), callback=self.set_freq
)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform["volume"] = form.quantized_slider_field(
parent=self.panel, sizer=hbox, label="Volume", weight=3, range=self.volume_range(), callback=self.set_vol
)
hbox.Add((5, 0), 1)
myform["gain"] = form.quantized_slider_field(
parent=self.panel,
sizer=hbox,
label="Gain",
weight=3,
range=self.subdev.gain_range(),
callback=self.set_gain,
)
hbox.Add((5, 0), 0)
myform["sqlch_thrsh"] = form.quantized_slider_field(
parent=self.panel,
sizer=hbox,
label="Stereo Squelch Threshold",
weight=3,
range=(0.0, 1.0, 0.01),
callback=self.set_squelch,
)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE(self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON(self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 0:
self.src_fft = fftsink.fft_sink_c (self, self.panel, title="Data from USRP",
fft_size=512, sample_rate=usrp_rate)
self.connect (self.src, self.src_fft)
vbox.Add (self.src_fft.win, 4, wx.EXPAND)
if 0:
post_demod_fft = fftsink.fft_sink_f (self, self.panel, title="Post Demod",
fft_size=512, sample_rate=demod_rate,
y_per_div=10, ref_level=-40)
self.connect (self.am_demod, post_demod_fft)
vbox.Add (post_demod_fft.win, 4, wx.EXPAND)
if 0:
post_filt_fft = fftsink.fft_sink_f (self, self.panel, title="Post Filter",
fft_size=512, sample_rate=audio_rate,
y_per_div=10, ref_level=-40)
self.connect (self.set_blacklevel, post_filt)
vbox.Add (fft_win4, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
if not (self.u is None):
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(self.tv_freq_min, self.tv_freq_max, 0.25e6),
callback=self.set_freq)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['contrast'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Contrast",
weight=3, range=(-2.0, 2.0, 0.1),
callback=self.set_contrast)
hbox.Add((5,0), 1)
myform['brightness'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Brightness",
weight=3, range=(-255.0, 255.0, 1.0),
callback=self.set_brightness)
hbox.Add((5,0), 0)
if not (self.u is None):
g = self.u.get_gain_range()
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE (self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON (self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 0:
self.src_fft = fftsink.fft_sink_c (self, self.panel, title="Data from USRP",
fft_size=512, sample_rate=usrp_rate)
self.connect (self.src, self.src_fft)
vbox.Add (self.src_fft.win, 4, wx.EXPAND)
if 0:
post_demod_fft = fftsink.fft_sink_f (self, self.panel, title="Post Demod",
fft_size=512, sample_rate=demod_rate,
y_per_div=10, ref_level=-40)
self.connect (self.am_demod, post_demod_fft)
vbox.Add (post_demod_fft.win, 4, wx.EXPAND)
if 0:
post_filt_fft = fftsink.fft_sink_f (self, self.panel, title="Post Filter",
fft_size=512, sample_rate=audio_rate,
y_per_div=10, ref_level=-40)
self.connect (self.set_blacklevel, post_filt)
vbox.Add (fft_win4, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
if not (self.u is None):
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(self.tv_freq_min, self.tv_freq_max, 0.25e6),
callback=self.set_freq)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['contrast'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Contrast",
weight=3, range=(-2.0, 2.0, 0.1),
callback=self.set_contrast)
hbox.Add((5,0), 1)
myform['brightness'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Brightness",
weight=3, range=(-255.0, 255.0, 1.0),
callback=self.set_brightness)
hbox.Add((5,0), 0)
if not (self.u is None):
g = self.u.get_gain_range()
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE (self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON (self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 1:
self.src_fft = fftsink2.fft_sink_c(self.panel,
title="Data from USRP2",
fft_size=512,
sample_rate=usrp_rate,
ref_scale=1.0,
ref_level=0,
y_divs=12)
self.connect(self.u, self.src_fft)
vbox.Add(self.src_fft.win, 4, wx.EXPAND)
if 1:
post_filt_fft = fftsink2.fft_sink_f(self.panel,
title="Post Demod",
fft_size=1024,
sample_rate=usrp_rate,
y_per_div=10,
ref_level=0)
self.connect(self.guts.fm_demod, post_filt_fft)
vbox.Add(post_filt_fft.win, 4, wx.EXPAND)
if 0:
post_deemph_fft = fftsink2.fft_sink_f(self.panel,
title="Post Deemph",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=-20)
self.connect(self.guts.deemph, post_deemph_fft)
vbox.Add(post_deemph_fft.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=hbox,
label="Freq",
weight=1,
callback=myform.check_input_and_call(
_form_set_freq,
self._set_status_msg))
hbox.Add((5, 0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(87.9e6, 108.1e6, 0.1e6),
callback=self.set_freq)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_vol)
hbox.Add((5, 0), 1)
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=self.u.gain_range(),
callback=self.set_gain)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE(self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON(self.frame, self.on_button)
except:
pass
def _build_gui(self, vbox):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
self.src_fft = None
if 1:
self.src_fft = fftsink2.fft_sink_c(self.panel, title="Data from MSDD",
fft_size=512, sample_rate=512)
# self.s2f1 = gr.short_to_float()
# self.scope = scopesink2.scope_sink_f(self.panel, sample_rate=self.sample_rate*self.fft_size)
self.connect (self.u, self.src_fft)
#self.connect (self.s2f1, self.scope)
vbox.Add (self.src_fft.win, 4, wx.EXPAND)
#
# if 1:
# post_filt_fft = fftsink2.fft_sink_f(self.panel, title="Post Demod",
# fft_size=1024, sample_rate=usrp_rate,
# y_per_div=10, ref_level=0)
# self.connect (self.guts.fm_demod, post_filt_fft)
# vbox.Add (post_filt_fft.win, 4, wx.EXPAND)
#
# if 0:
# post_deemph_fft = fftsink2.fft_sink_f(self.panel, title="Post Deemph",
# fft_size=512, sample_rate=audio_rate,
# y_per_div=10, ref_level=-20)
# self.connect (self.guts.deemph, post_deemph_fft)
# vbox.Add (post_deemph_fft.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(30e6, 6e9, 1e6),
callback=self.set_freq)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
#
# myform['volume'] = \
# form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
# weight=3, range=self.volume_range(),
# callback=self.set_vol)
# hbox.Add((5,0), 1)
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=self.gain_range,
callback=self.set_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 1:
self.src_fft = fftsink2.fft_sink_c(self.panel, title="Data from USRP2",
fft_size=512, sample_rate=usrp_rate,
ref_scale=1.0, ref_level=0, y_divs=12)
self.connect (self.u, self.src_fft)
vbox.Add (self.src_fft.win, 4, wx.EXPAND)
if 1:
post_filt_fft = fftsink2.fft_sink_f(self.panel, title="Post Demod",
fft_size=1024, sample_rate=usrp_rate,
y_per_div=10, ref_level=0)
self.connect (self.guts.fm_demod, post_filt_fft)
vbox.Add (post_filt_fft.win, 4, wx.EXPAND)
if 0:
post_deemph_fft = fftsink2.fft_sink_f(self.panel, title="Post Deemph",
fft_size=512, sample_rate=audio_rate,
y_per_div=10, ref_level=-20)
self.connect (self.guts.deemph, post_deemph_fft)
vbox.Add (post_deemph_fft.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(87.9e6, 108.1e6, 0.1e6),
callback=self.set_freq)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_vol)
hbox.Add((5,0), 1)
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=self.u.gain_range(),
callback=self.set_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE (self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON (self.frame, self.on_button)
except:
pass
def _build_gui(self, vbox, no_gui):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
self.src_fft = None
if 1 and not (no_gui):
self.src_fft = fftsink2.fft_sink_c(self.panel,
title="Data from USRP",
fft_size=512,
sample_rate=self.rxpath.if_rate,
ref_scale=32768.0,
ref_level=0,
y_per_div=10,
y_divs=12)
self.connect(self.rxpath.u, self.src_fft)
vbox.Add(self.src_fft.win, 4, wx.EXPAND)
if 1 and not (no_gui):
rx_fft = fftsink2.fft_sink_c(self.panel,
title="Post s/w DDC",
fft_size=512,
sample_rate=self.rxpath.quad_rate,
ref_level=80,
y_per_div=20)
self.connect(self.rxpath.ddc, rx_fft)
vbox.Add(rx_fft.win, 4, wx.EXPAND)
if 1 and not (no_gui):
post_deemph_fft = fftsink2.fft_sink_f(
self.panel,
title="Post Deemph",
fft_size=512,
sample_rate=self.rxpath.audio_rate,
y_per_div=10,
ref_level=-40)
self.connect(self.rxpath.fmrx.deemph, post_deemph_fft)
vbox.Add(post_deemph_fft.win, 4, wx.EXPAND)
if 0:
post_filt_fft = fftsink2.fft_sink_f(self.panel,
title="Post Filter",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=-40)
self.connect(self.guts.audio_filter, post_filt)
vbox.Add(fft_win4, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=hbox,
label="Freq",
weight=1,
callback=myform.check_input_and_call(
_form_set_freq,
self._set_status_msg))
#hbox.Add((5,0), 0)
#myform['freq_slider'] = \
# form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
# range=(87.9e6, 108.1e6, 0.1e6),
# callback=self.set_freq)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_volume)
hbox.Add((5, 0), 0)
myform['squelch'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Squelch",
weight=3, range=self.rxpath.squelch_range(),
callback=self.set_squelch)
hbox.Add((5, 0), 0)
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=self.rxpath.subdev.gain_range(),
callback=self.set_gain)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE(self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON(self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, vbox):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
self.src_fft = None
if 1:
self.src_fft = fftsink2.fft_sink_c(self.panel,
title="Data from MSDD",
fft_size=512,
sample_rate=512)
# self.s2f1 = gr.short_to_float()
# self.scope = scopesink2.scope_sink_f(self.panel, sample_rate=self.sample_rate*self.fft_size)
self.connect(self.u, self.src_fft)
#self.connect (self.s2f1, self.scope)
vbox.Add(self.src_fft.win, 4, wx.EXPAND)
#
# if 1:
# post_filt_fft = fftsink2.fft_sink_f(self.panel, title="Post Demod",
# fft_size=1024, sample_rate=usrp_rate,
# y_per_div=10, ref_level=0)
# self.connect (self.guts.fm_demod, post_filt_fft)
# vbox.Add (post_filt_fft.win, 4, wx.EXPAND)
#
# if 0:
# post_deemph_fft = fftsink2.fft_sink_f(self.panel, title="Post Deemph",
# fft_size=512, sample_rate=audio_rate,
# y_per_div=10, ref_level=-20)
# self.connect (self.guts.deemph, post_deemph_fft)
# vbox.Add (post_deemph_fft.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=hbox,
label="Freq",
weight=1,
callback=myform.check_input_and_call(
_form_set_freq,
self._set_status_msg))
hbox.Add((5, 0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(30e6, 6e9, 1e6),
callback=self.set_freq)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
#
# myform['volume'] = \
# form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
# weight=3, range=self.volume_range(),
# callback=self.set_vol)
# hbox.Add((5,0), 1)
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=self.gain_range,
callback=self.set_gain)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
def build_gui(self):
self.myform = myform = form.form()
# Baseband controls
bb_sbox = wx.StaticBox(parent=self.panel, label="Baseband Modulation")
bb_vbox = wx.StaticBoxSizer(
bb_sbox, wx.VERTICAL) # Holds all baseband controls as unit
# First row of baseband controls (modulation type)
mod_hbox = wx.BoxSizer(wx.HORIZONTAL)
mod_hbox.Add((10, 0), 0, 0)
myform['type'] = form.radiobox_field(
parent=self.panel,
label="Type",
sizer=mod_hbox,
value=None,
callback=self.evt_set_waveform_type,
weight=1,
major_dimension=0,
choices=usrp2_siggen.waveforms.values())
bb_vbox.Add((0, 10), 0, 0)
bb_vbox.Add(mod_hbox, 0, wx.EXPAND)
# Second row of baseband controls (frequencies)
bbf_hbox = wx.BoxSizer(wx.HORIZONTAL)
bbf_hbox.Add((10, 0), 0, 0)
myform['w1freq'] = form.float_field(
parent=self.panel,
sizer=bbf_hbox,
label="Frequency 1 (Hz)",
weight=1,
callback=myform.check_input_and_call(self.evt_set_freq1,
self.evt_set_status_msg))
bbf_hbox.Add((10, 0), 0, 0)
myform['w2freq'] = form.float_field(
parent=self.panel,
sizer=bbf_hbox,
label="Frequency 2 (Hz)",
weight=1,
callback=myform.check_input_and_call(self.evt_set_freq2,
self.evt_set_status_msg))
bbf_hbox.Add((10, 0), 0, 0)
bb_vbox.Add((0, 10), 0, 0)
bb_vbox.Add(bbf_hbox, 0, wx.EXPAND)
# Add baseband controls to top window sizer
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(bb_vbox, 0, wx.EXPAND)
# Frequency controls
fc_sbox = wx.StaticBox(parent=self.panel, label="Center Frequency")
fc_vbox = wx.StaticBoxSizer(
fc_sbox, wx.VERTICAL) # Holds all frequency controls as unit
# First row of frequency controls (center frequency)
freq_hbox = wx.BoxSizer(wx.HORIZONTAL)
freq_hbox.Add((10, 0), 0, 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=freq_hbox,
label=None,
weight=1,
callback=myform.check_input_and_call(
self.evt_set_freq,
self.evt_set_status_msg))
freq_hbox.Add((10, 0), 0, 0)
myform['freq_slider'] = form.quantized_slider_field(
parent=self.panel,
sizer=freq_hbox,
label="Min-Max",
weight=4,
range=(self.min_freq, self.max_freq, self.freq_step),
callback=self.evt_set_freq)
freq_hbox.Add((10, 0), 0, 0)
fc_vbox.Add((10, 0), 0, 0)
fc_vbox.Add(freq_hbox, 0, wx.EXPAND)
# Second row of frequency controls (results)
tr_hbox = wx.BoxSizer(wx.HORIZONTAL)
tr_hbox.Add((10, 0), 0, 0)
myform['analog'] = form.static_float_field(parent=self.panel,
sizer=tr_hbox,
label="Daughterboard: (Hz)",
weight=1)
tr_hbox.Add((10, 0), 0, 0)
myform['DDC'] = form.static_float_field(parent=self.panel,
sizer=tr_hbox,
label="USRP2 DDC (Hz)",
weight=1)
tr_hbox.Add((10, 0), 0, 0)
fc_vbox.Add(tr_hbox, 0, wx.EXPAND)
# Add frequency controls to top window sizer
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(fc_vbox, 0, wx.EXPAND)
# Amplitude row
amp_sbox = wx.StaticBox(parent=self.panel, label="Amplitude")
amp_hbox = wx.StaticBoxSizer(amp_sbox, wx.HORIZONTAL)
amp_hbox.Add((10, 0), 0, 0)
myform['amp'] = form.float_field(parent=self.panel,
sizer=amp_hbox,
label="Linear\n(0.0-1.0)",
weight=1,
callback=myform.check_input_and_call(
self.evt_set_amplitude,
self.evt_set_status_msg))
amp_hbox.Add((10, 0), 0, 0)
myform['amp_slider'] = form.quantized_slider_field(
parent=self.panel,
sizer=amp_hbox,
label="dB Full Scale\n(-100-0)",
weight=4,
range=(-100.0, 0.0, 1),
callback=self.evt_set_amplitude)
amp_hbox.Add((10, 0), 0, 0)
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(amp_hbox, 0, wx.EXPAND)
# Sample rate row
sam_sbox = wx.StaticBox(parent=self.panel, label="Sample Rate")
sam_hbox = wx.StaticBoxSizer(sam_sbox, wx.HORIZONTAL)
sam_hbox.Add((10, 0), 0, 0)
myform['interp'] = form.int_field(parent=self.panel,
sizer=sam_hbox,
label="Interpolation",
weight=1,
callback=self.evt_set_interp)
sam_hbox.Add((10, 0), 0, 0)
myform['eth'] = form.static_float_field(parent=self.panel,
sizer=sam_hbox,
label="Sample Rate (sps)",
weight=1)
sam_hbox.Add((10, 0), 0, 0)
myform['gbe'] = form.static_float_field(parent=self.panel,
sizer=sam_hbox,
label="GbE Rate (bits/sec)",
weight=1)
sam_hbox.Add((10, 0), 0, 0)
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(sam_hbox, 0, wx.EXPAND)
# USRP2 row
u2_sbox = wx.StaticBox(parent=self.panel, label="USRP2 Hardware")
u2_hbox = wx.StaticBoxSizer(u2_sbox, wx.HORIZONTAL)
u2_hbox.Add((10, 0), 0, 0)
myform['ifc'] = form.static_text_field(parent=self.panel,
sizer=u2_hbox,
label="Interface",
weight=2)
u2_hbox.Add((10, 0), 0, 0)
myform['mac'] = form.static_text_field(parent=self.panel,
sizer=u2_hbox,
label="MAC Address",
weight=2)
u2_hbox.Add((10, 0), 0, 0)
myform['dbid'] = form.static_text_field(parent=self.panel,
sizer=u2_hbox,
label="Daughterboard ID",
weight=1)
self.vbox.Add((0, 10), 0, 0)
self.vbox.Add(u2_hbox, 0, wx.EXPAND)
self.vbox.Add((0, 20), 0, 0)
def _build_gui(self, vbox):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
def _form_set_dm(kv):
return self.set_dm(kv['DM'])
def _form_set_doppler(kv):
return self.set_doppler(kv['Doppler'])
# Position the FFT or Waterfall
vbox.Add(self.scope.win, 5, wx.EXPAND)
vbox.Add(self.chart.win, 5, wx.EXPAND)
# add control area at the bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((7,0), 0, wx.EXPAND)
vbox1 = wx.BoxSizer(wx.VERTICAL)
myform['freq'] = form.float_field(
parent=self.panel, sizer=vbox1, label="Center freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
vbox1.Add((3,0), 0, 0)
# To show current Local Mean Sidereal Time
myform['lmst_high'] = form.static_text_field(
parent=self.panel, sizer=vbox1, label="Current LMST", weight=1)
vbox1.Add((3,0), 0, 0)
# To show current spectral cursor data
myform['spec_data'] = form.static_text_field(
parent=self.panel, sizer=vbox1, label="Pulse Freq", weight=1)
vbox1.Add((3,0), 0, 0)
# To show best pulses found in FFT output
myform['best_pulse'] = form.static_text_field(
parent=self.panel, sizer=vbox1, label="Best freq", weight=1)
vbox1.Add((3,0), 0, 0)
vboxBogus = wx.BoxSizer(wx.VERTICAL)
vboxBogus.Add ((2,0), 0, wx.EXPAND)
vbox2 = wx.BoxSizer(wx.VERTICAL)
g = self.subdev.gain_range()
myform['gain'] = form.slider_field(parent=self.panel, sizer=vbox2, label="RF Gain",
weight=1,
min=int(g[0]), max=int(g[1]),
callback=self.set_gain)
vbox2.Add((6,0), 0, 0)
myform['average'] = form.slider_field(parent=self.panel, sizer=vbox2,
label="Spectral Averaging", weight=1, min=1, max=200, callback=self.set_averaging)
vbox2.Add((6,0), 0, 0)
myform['foldavg'] = form.slider_field(parent=self.panel, sizer=vbox2,
label="Folder Averaging", weight=1, min=1, max=20, callback=self.set_folder_averaging)
vbox2.Add((6,0), 0, 0)
myform['volume'] = form.quantized_slider_field(parent=self.panel, sizer=vbox2,
label="Audio Volume", weight=1, range=(-20, 0, 0.5), callback=self.set_volume)
vbox2.Add((6,0), 0, 0)
myform['DM'] = form.float_field(
parent=self.panel, sizer=vbox2, label="DM", weight=1,
callback=myform.check_input_and_call(_form_set_dm))
vbox2.Add((6,0), 0, 0)
myform['Doppler'] = form.float_field(
parent=self.panel, sizer=vbox2, label="Doppler", weight=1,
callback=myform.check_input_and_call(_form_set_doppler))
vbox2.Add((6,0), 0, 0)
# Baseband recording control
buttonbox = wx.BoxSizer(wx.HORIZONTAL)
self.record_control = form.button_with_callback(self.panel,
label="Recording baseband: Off ",
callback=self.toggle_recording)
self.record_pulse_control = form.button_with_callback(self.panel,
label="Recording pulses: Off ",
callback=self.toggle_pulse_recording)
buttonbox.Add(self.record_control, 0, wx.CENTER)
buttonbox.Add(self.record_pulse_control, 0, wx.CENTER)
vbox.Add(buttonbox, 0, wx.CENTER)
hbox.Add(vbox1, 0, 0)
hbox.Add(vboxBogus, 0, 0)
hbox.Add(vbox2, wx.ALIGN_RIGHT, 0)
vbox.Add(hbox, 0, wx.EXPAND)
self._build_subpanel(vbox)
self.lmst_timer = wx.PyTimer(self.lmst_timeout)
self.lmst_timeout()
def _build_gui(self, vbox, no_gui):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
self.src_fft = None
if 0 and not(no_gui):
self.src_fft = fftsink2.fft_sink_c(self.panel,
title="Data from USRP",
fft_size=512,
sample_rate=self.rxpath.if_rate,
ref_scale=32768.0,
ref_level=0,
y_per_div=10,
y_divs=12)
self.connect (self.rxpath.u, self.src_fft)
vbox.Add (self.src_fft.win, 4, wx.EXPAND)
if 1 and not(no_gui):
rx_fft = fftsink2.fft_sink_c(self.panel,
title="Post s/w Resampling",
fft_size=512,
sample_rate=self.rxpath.quad_rate,
ref_level=80,
y_per_div=20)
self.connect (self.rxpath.resamp, rx_fft)
vbox.Add (rx_fft.win, 4, wx.EXPAND)
if 1 and not(no_gui):
post_deemph_fft = fftsink2.fft_sink_f(self.panel,
title="Post Deemph",
fft_size=512,
sample_rate=self.rxpath.audio_rate,
y_per_div=10,
ref_level=-40)
self.connect (self.rxpath.fmrx.deemph, post_deemph_fft)
vbox.Add (post_deemph_fft.win, 4, wx.EXPAND)
if 0:
post_filt_fft = fftsink2.fft_sink_f(self.panel,
title="Post Filter",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=-40)
self.connect (self.guts.audio_filter, post_filt)
vbox.Add (fft_win4, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq,
self._set_status_msg))
#hbox.Add((5,0), 0)
#myform['freq_slider'] = \
# form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
# range=(87.9e6, 108.1e6, 0.1e6),
# callback=self.set_freq)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_volume)
hbox.Add((5,0), 0)
myform['squelch'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Squelch",
weight=3, range=self.rxpath.squelch_range(),
callback=self.set_squelch)
g = self.rxpath.u.get_gain_range()
hbox.Add((5,0), 0)
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE (self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON (self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 0:
self.src_fft = fftsink2.fft_sink_c(self.panel, title="Data from USRP",
fft_size=512, sample_rate=usrp_rate,
ref_scale=32768.0, ref_level=0.0, y_divs=12)
self.connect (self.u, self.src_fft)
vbox.Add (self.src_fft.win, 4, wx.EXPAND)
if 0:
self.post_filt_fft = fftsink2.fft_sink_c(self.panel, title="Post Channel filter",
fft_size=512, sample_rate=demod_rate)
self.connect (self.chan_filt, self.post_filt_fft)
vbox.Add (self.post_filt_fft.win, 4, wx.EXPAND)
if 0:
post_demod_fft = fftsink2.fft_sink_f(self.panel, title="Post Demod",
fft_size=1024, sample_rate=demod_rate,
y_per_div=10, ref_level=0)
self.connect (self.am_demod, post_demod_fft)
vbox.Add (post_demod_fft.win, 4, wx.EXPAND)
if 1:
audio_fft = fftsink2.fft_sink_f(self.panel, title="Audio",
fft_size=512, sample_rate=audio_rate,
y_per_div=10, ref_level=20)
self.connect (self.audio_filt, audio_fft)
vbox.Add (audio_fft.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(520.0e3, 1611.0e3, 1.0e3),
callback=self.set_freq)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_vol)
hbox.Add((5,0), 1)
g = self.u.get_gain_range()
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE (self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON (self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, frame, panel, vbox, argv, no_gui):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
self.panel = panel
# FIXME This REALLY needs to be replaced with a hand-crafted button
# that sends both button down and button up events
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((10,0), 1)
self.status_msg = wx.StaticText(panel, -1, "Press Space Bar to Transmit")
of = self.status_msg.GetFont()
self.status_msg.SetFont(wx.Font(15, of.GetFamily(), of.GetStyle(), of.GetWeight()))
hbox.Add(self.status_msg, 0, wx.ALIGN_CENTER)
hbox.Add((10,0), 1)
vbox.Add(hbox, 0, wx.EXPAND | wx.ALIGN_CENTER)
panel.Bind(wx.EVT_KEY_DOWN, self._on_key_down)
panel.Bind(wx.EVT_KEY_UP, self._on_key_up)
panel.Bind(wx.EVT_KILL_FOCUS, self._on_kill_focus)
panel.SetFocus()
if 1 and not(no_gui):
rx_fft = fftsink2.fft_sink_c(panel, title="Rx Input", fft_size=512,
sample_rate=self.rxpath.if_rate,
ref_level=80, y_per_div=20)
self.connect (self.rxpath.u, rx_fft)
vbox.Add (rx_fft.win, 1, wx.EXPAND)
if 1 and not(no_gui):
rx_fft = fftsink2.fft_sink_c(panel, title="Post s/w Resampler",
fft_size=512, sample_rate=self.rxpath.quad_rate,
ref_level=80, y_per_div=20)
self.connect (self.rxpath.resamp, rx_fft)
vbox.Add (rx_fft.win, 1, wx.EXPAND)
if 0 and not(no_gui):
foo = scopesink2.scope_sink_f(panel, title="Squelch",
sample_rate=32000)
self.connect (self.rxpath.fmrx.div, (foo,0))
self.connect (self.rxpath.fmrx.gate, (foo,1))
self.connect (self.rxpath.fmrx.squelch_lpf, (foo,2))
vbox.Add (foo.win, 1, wx.EXPAND)
if 0 and not(no_gui):
tx_fft = fftsink2.fft_sink_c(panel, title="Tx Output",
fft_size=512, sample_rate=self.txpath.usrp_rate)
self.connect (self.txpath.amp, tx_fft)
vbox.Add (tx_fft.win, 1, wx.EXPAND)
# add control area at the bottom
self.myform = myform = form.form()
# first row
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0, 0)
myform['freq'] = form.float_field(
parent=panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0, 0)
vbox.Add(hbox, 0, wx.EXPAND)
# second row
hbox = wx.BoxSizer(wx.HORIZONTAL)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.rxpath.volume_range(),
callback=self.set_volume)
hbox.Add((5,0), 0)
myform['squelch'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Squelch",
weight=3, range=self.rxpath.squelch_range(),
callback=self.set_squelch)
g = self.rxpath.u.get_gain_range()
hbox.Add((5,0), 0)
myform['rx_gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Rx Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_rx_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
self._build_subpanel(vbox)
def _build_gui(self, vbox, usrp_rate, demod_rate, audio_rate):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
if 1:
self.src_fft = fftsink2.fft_sink_c(self.panel,
title="Data from USRP",
fft_size=512,
sample_rate=usrp_rate,
ref_scale=32768.0,
ref_level=0,
y_divs=12)
self.connect(self.u, self.src_fft)
vbox.Add(self.src_fft.win, 4, wx.EXPAND)
if 1:
post_fm_demod_fft = fftsink2.fft_sink_f(self.panel,
title="Post FM Demod",
fft_size=512,
sample_rate=demod_rate,
y_per_div=10,
ref_level=0)
self.connect(self.guts.fm_demod, post_fm_demod_fft)
vbox.Add(post_fm_demod_fft.win, 4, wx.EXPAND)
if 0:
post_stereo_carrier_generator_fft = fftsink2.fft_sink_c(
self.panel,
title="Post Stereo_carrier_generator",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=0)
self.connect(self.guts.stereo_carrier_generator,
post_stereo_carrier_generator_fft)
vbox.Add(post_stereo_carrier_generator_fft.win, 4, wx.EXPAND)
if 0:
post_deemphasis_left = fftsink2.fft_sink_f(
self.panel,
title="Post_Deemphasis_Left",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=0)
self.connect(self.guts.deemph_Left, post_deemphasis_left)
vbox.Add(post_deemphasis_left.win, 4, wx.EXPAND)
if 0:
post_deemphasis_right = fftsink2.fft_sink_f(
self.panel,
title="Post_Deemphasis_Right",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=-20)
self.connect(self.guts.deemph_Left, post_deemphasis_right)
vbox.Add(post_deemphasis_right.win, 4, wx.EXPAND)
if 0:
LmR_fft = fftsink2.fft_sink_f(self.panel,
title="LmR",
fft_size=512,
sample_rate=audio_rate,
y_per_div=10,
ref_level=-20)
self.connect(self.guts.LmR_real, LmR_fft)
vbox.Add(LmR_fft.win, 4, wx.EXPAND)
if 0:
self.scope = scopesink2.scope_sink_f(self.panel,
sample_rate=demod_rate)
self.connect(self.guts.fm_demod, self.scope)
vbox.Add(self.scope.win, 4, wx.EXPAND)
# control area form at bottom
self.myform = myform = form.form()
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['freq'] = form.float_field(parent=self.panel,
sizer=hbox,
label="Freq",
weight=1,
callback=myform.check_input_and_call(
_form_set_freq,
self._set_status_msg))
hbox.Add((5, 0), 0)
myform['freq_slider'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, weight=3,
range=(self.fm_freq_min, self.fm_freq_max, 0.1e6),
callback=self.set_freq)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5, 0), 0)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.volume_range(),
callback=self.set_vol)
hbox.Add((5, 0), 1)
g = self.u.get_gain_range()
myform['gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Gain",
weight=3, range=(g.start(), g.stop(), g.step()),
callback=self.set_gain)
hbox.Add((5, 0), 0)
myform['sqlch_thrsh'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Stereo Squelch Threshold",
weight=3, range=(0.0,1.0,0.01),
callback=self.set_squelch)
hbox.Add((5, 0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
try:
self.knob = powermate.powermate(self.frame)
self.rot = 0
powermate.EVT_POWERMATE_ROTATE(self.frame, self.on_rotate)
powermate.EVT_POWERMATE_BUTTON(self.frame, self.on_button)
except:
print "FYI: No Powermate or Contour Knob found"
def _build_gui(self, frame, panel, vbox, argv, no_gui):
def _form_set_freq(kv):
return self.set_freq(kv['freq'])
self.panel = panel
# FIXME This REALLY needs to be replaced with a hand-crafted button
# that sends both button down and button up events
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((10,0), 1)
self.status_msg = wx.StaticText(panel, -1, "Press Space Bar to Transmit")
of = self.status_msg.GetFont()
self.status_msg.SetFont(wx.Font(15, of.GetFamily(), of.GetStyle(), of.GetWeight()))
hbox.Add(self.status_msg, 0, wx.ALIGN_CENTER)
hbox.Add((10,0), 1)
vbox.Add(hbox, 0, wx.EXPAND | wx.ALIGN_CENTER)
panel.Bind(wx.EVT_KEY_DOWN, self._on_key_down)
panel.Bind(wx.EVT_KEY_UP, self._on_key_up)
panel.Bind(wx.EVT_KILL_FOCUS, self._on_kill_focus)
panel.SetFocus()
if 1 and not(no_gui):
rx_fft = fftsink2.fft_sink_c(panel, title="Rx Input", fft_size=512,
sample_rate=self.rxpath.if_rate,
ref_level=80, y_per_div=20)
self.connect (self.rxpath.u, rx_fft)
vbox.Add (rx_fft.win, 1, wx.EXPAND)
if 1 and not(no_gui):
rx_fft = fftsink2.fft_sink_c(panel, title="Post s/w DDC",
fft_size=512, sample_rate=self.rxpath.quad_rate,
ref_level=80, y_per_div=20)
self.connect (self.rxpath.ddc, rx_fft)
vbox.Add (rx_fft.win, 1, wx.EXPAND)
if 0 and not(no_gui):
foo = scopesink2.scope_sink_f(panel, title="Squelch",
sample_rate=32000)
self.connect (self.rxpath.fmrx.div, (foo,0))
self.connect (self.rxpath.fmrx.gate, (foo,1))
self.connect (self.rxpath.fmrx.squelch_lpf, (foo,2))
vbox.Add (foo.win, 1, wx.EXPAND)
if 0 and not(no_gui):
tx_fft = fftsink2.fft_sink_c(panel, title="Tx Output",
fft_size=512, sample_rate=self.txpath.usrp_rate)
self.connect (self.txpath.amp, tx_fft)
vbox.Add (tx_fft.win, 1, wx.EXPAND)
# add control area at the bottom
self.myform = myform = form.form()
# first row
hbox = wx.BoxSizer(wx.HORIZONTAL)
hbox.Add((5,0), 0, 0)
myform['freq'] = form.float_field(
parent=panel, sizer=hbox, label="Freq", weight=1,
callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg))
hbox.Add((5,0), 0, 0)
vbox.Add(hbox, 0, wx.EXPAND)
# second row
hbox = wx.BoxSizer(wx.HORIZONTAL)
myform['volume'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Volume",
weight=3, range=self.rxpath.volume_range(),
callback=self.set_volume)
hbox.Add((5,0), 0)
myform['squelch'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Squelch",
weight=3, range=self.rxpath.squelch_range(),
callback=self.set_squelch)
hbox.Add((5,0), 0)
myform['rx_gain'] = \
form.quantized_slider_field(parent=self.panel, sizer=hbox, label="Rx Gain",
weight=3, range=self.rxpath.subdev.gain_range(),
callback=self.set_rx_gain)
hbox.Add((5,0), 0)
vbox.Add(hbox, 0, wx.EXPAND)
self._build_subpanel(vbox)
def build_gui(self):
self.myform = myform = form.form()
# Baseband controls
bb_sbox = wx.StaticBox(parent=self.panel, label="Baseband Modulation")
bb_vbox = wx.StaticBoxSizer(bb_sbox, wx.VERTICAL) # Holds all baseband controls as unit
# First row of baseband controls (modulation type)
mod_hbox = wx.BoxSizer(wx.HORIZONTAL)
mod_hbox.Add((10,0), 0, 0)
myform['type'] = form.radiobox_field(
parent=self.panel, label="Type", sizer=mod_hbox, value=None,
callback=self.evt_set_waveform_type, weight=1, major_dimension=0,
choices=usrp2_siggen.waveforms.values() )
bb_vbox.Add((0,10), 0, 0)
bb_vbox.Add(mod_hbox, 0, wx.EXPAND)
# Second row of baseband controls (frequencies)
bbf_hbox = wx.BoxSizer(wx.HORIZONTAL)
bbf_hbox.Add((10,0), 0, 0)
myform['w1freq'] = form.float_field(
parent=self.panel, sizer=bbf_hbox, label="Frequency 1 (Hz)", weight=1,
callback=myform.check_input_and_call(self.evt_set_freq1, self.evt_set_status_msg) )
bbf_hbox.Add((10,0), 0, 0)
myform['w2freq'] = form.float_field(
parent=self.panel, sizer=bbf_hbox, label="Frequency 2 (Hz)", weight=1,
callback=myform.check_input_and_call(self.evt_set_freq2, self.evt_set_status_msg) )
bbf_hbox.Add((10,0), 0, 0)
bb_vbox.Add((0,10), 0, 0)
bb_vbox.Add(bbf_hbox, 0, wx.EXPAND)
# Add baseband controls to top window sizer
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(bb_vbox, 0, wx.EXPAND)
# Frequency controls
fc_sbox = wx.StaticBox(parent=self.panel, label="Center Frequency")
fc_vbox = wx.StaticBoxSizer(fc_sbox, wx.VERTICAL) # Holds all frequency controls as unit
# First row of frequency controls (center frequency)
freq_hbox = wx.BoxSizer(wx.HORIZONTAL)
freq_hbox.Add((10,0), 0, 0)
myform['freq'] = form.float_field(
parent=self.panel, sizer=freq_hbox, label=None, weight=1,
callback=myform.check_input_and_call(self.evt_set_freq, self.evt_set_status_msg) )
freq_hbox.Add((10,0), 0, 0)
myform['freq_slider'] = form.quantized_slider_field(
parent=self.panel, sizer=freq_hbox, label="Min-Max", weight=4,
range = (self.min_freq, self.max_freq, self.freq_step),
callback=self.evt_set_freq)
freq_hbox.Add((10,0), 0, 0)
fc_vbox.Add((10,0), 0, 0)
fc_vbox.Add(freq_hbox, 0, wx.EXPAND)
# Second row of frequency controls (results)
tr_hbox = wx.BoxSizer(wx.HORIZONTAL)
tr_hbox.Add((10,0), 0, 0)
myform['analog'] = form.static_float_field(
parent=self.panel, sizer=tr_hbox, label="Daughterboard: (Hz)", weight=1)
tr_hbox.Add((10,0), 0, 0)
myform['DDC'] = form.static_float_field(
parent=self.panel, sizer=tr_hbox, label="USRP2 DDC (Hz)", weight=1)
tr_hbox.Add((10,0), 0, 0)
fc_vbox.Add(tr_hbox, 0, wx.EXPAND)
# Add frequency controls to top window sizer
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(fc_vbox, 0, wx.EXPAND)
# Amplitude row
amp_sbox = wx.StaticBox(parent=self.panel, label="Amplitude")
amp_hbox = wx.StaticBoxSizer(amp_sbox, wx.HORIZONTAL)
amp_hbox.Add((10,0), 0, 0)
myform['amp'] = form.float_field(
parent=self.panel, sizer=amp_hbox, label="Linear\n(0.0-1.0)", weight=1,
callback=myform.check_input_and_call(self.evt_set_amplitude, self.evt_set_status_msg) )
amp_hbox.Add((10,0), 0, 0)
myform['amp_slider'] = form.quantized_slider_field(
parent=self.panel, sizer=amp_hbox, label="dB Full Scale\n(-100-0)", weight=4,
range=(-100.0, 0.0, 1), callback=self.evt_set_amplitude)
amp_hbox.Add((10,0), 0, 0)
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(amp_hbox, 0, wx.EXPAND)
# Sample rate row
sam_sbox = wx.StaticBox(parent=self.panel, label="Sample Rate")
sam_hbox = wx.StaticBoxSizer(sam_sbox, wx.HORIZONTAL)
sam_hbox.Add((10,0), 0, 0)
myform['interp'] = form.int_field(
parent=self.panel, sizer=sam_hbox, label="Interpolation", weight=1,
callback=self.evt_set_interp)
sam_hbox.Add((10,0), 0, 0)
myform['eth'] = form.static_float_field(
parent=self.panel, sizer=sam_hbox, label="Sample Rate (sps)", weight=1)
sam_hbox.Add((10,0), 0, 0)
myform['gbe'] = form.static_float_field(
parent=self.panel, sizer=sam_hbox, label="GbE Rate (bits/sec)", weight=1)
sam_hbox.Add((10,0), 0, 0)
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(sam_hbox, 0, wx.EXPAND)
# USRP2 row
u2_sbox = wx.StaticBox(parent=self.panel, label="USRP2 Hardware")
u2_hbox = wx.StaticBoxSizer(u2_sbox, wx.HORIZONTAL)
u2_hbox.Add((10,0), 0, 0)
myform['ifc'] = form.static_text_field(parent=self.panel, sizer=u2_hbox,
label="Interface", weight=2)
u2_hbox.Add((10,0), 0, 0)
myform['mac'] = form.static_text_field(parent=self.panel, sizer=u2_hbox,
label="MAC Address", weight=2)
u2_hbox.Add((10,0), 0, 0)
myform['dbid'] = form.static_text_field(parent=self.panel, sizer=u2_hbox,
label="Daughterboard ID", weight=1)
self.vbox.Add((0,10), 0, 0)
self.vbox.Add(u2_hbox, 0, wx.EXPAND)
self.vbox.Add((0,20), 0, 0)
