from gpiozero import LED from gpiozero.pins.pigpio import PiGPIOFactory from gpiozero.tools import all_values from signal import pause factory3 = PiGPIOFactory(host='192.168.1.3') factory4 = PiGPIOFactory(host='192.168.1.4') led = LED(17) button_1 = Button(17, pin_factory=factory3) button_2 = Button(17, pin_factory=factory4) led.source = all_values(button_1, button_2) pause()
def main():
# from picamera import PiCamera
from gpiozero import LED, Button, MotionSensor
from gpiozero.tools import all_values, any_values
from signal import pause
# import logging
import json
import sys
print('')
print('# RPiMS is running #')
print('')
global redis_db
redis_db = db_connect('localhost', 0)
config_yaml = config_load('/var/www/html/conf/rpims.yaml')
config = config_yaml['setup']
zabbix_agent = config_yaml['zabbix_agent']
gpio = config_yaml.get("gpio")
redis_db.flushdb()
redis_db.set('gpio', json.dumps(gpio))
redis_db.set('config', json.dumps(config))
redis_db.set('zabbix_agent', json.dumps(zabbix_agent))
get_hostip()
hostnamectl_sh(**zabbix_agent)
if bool(config['verbose']) is True:
for k, v in config.items():
print(f'{k} = {v}')
for k, v in zabbix_agent.items():
print(f'{k} = {v}')
print('')
if bool(config['use_door_sensor']) is True:
global door_sensors_list
door_sensors_list = {}
for item in gpio:
if (gpio[item]['type'] == 'DoorSensor'):
door_sensors_list[item] = Button(gpio[item]['gpio_pin'],
hold_time=int(
gpio[item]['hold_time']))
if bool(config['use_motion_sensor']) is True:
global motion_sensors_list
motion_sensors_list = {}
for item in gpio:
if (gpio[item]['type'] == 'MotionSensor'):
motion_sensors_list[item] = MotionSensor(
gpio[item]['gpio_pin'])
if bool(config['use_system_buttons']) is True:
global system_buttons_list
system_buttons_list = {}
for item in gpio:
if (gpio[item]['type'] == 'ShutdownButton'):
system_buttons_list['shutdown_button'] = Button(
gpio[item]['gpio_pin'],
hold_time=int(gpio[item]['hold_time']))
global led_indicators_list
led_indicators_list = {}
for item in gpio:
if (gpio[item]['type'] == 'door_led'):
led_indicators_list['door_led'] = LED(gpio[item]['gpio_pin'])
if (gpio[item]['type'] == 'motion_led'):
led_indicators_list['motion_led'] = LED(gpio[item]['gpio_pin'])
if (gpio[item]['type'] == 'led'):
led_indicators_list['led'] = LED(gpio[item]['gpio_pin'])
if bool(config['use_door_sensor']) is True:
for k, v in door_sensors_list.items():
if v.value == 0:
door_status_open(k, **config)
else:
door_status_close(k, **config)
for k, v in door_sensors_list.items():
v.when_held = lambda s=k: door_action_closed(s, **config)
v.when_released = lambda s=k: door_action_opened(s, **config)
if bool(config['use_door_led_indicator']) is True:
led_indicators_list['door_led'].source = all_values(
*door_sensors_list.values())
if bool(config['use_motion_sensor']) is True:
for k, v in motion_sensors_list.items():
if v.value == 0:
motion_sensor_when_no_motion(k, **config)
else:
motion_sensor_when_motion(k, **config)
for k, v in motion_sensors_list.items():
v.when_motion = lambda s=k: motion_sensor_when_motion(k, **config)
v.when_no_motion = lambda s=k: motion_sensor_when_no_motion(
k, **config)
if bool(config['use_motion_led_indicator']) is True:
led_indicators_list['motion_led'].source = any_values(
*motion_sensors_list.values())
if bool(config['use_system_buttons']) is True:
system_buttons_list['shutdown_button'].when_held = shutdown
if bool(config['use_CPU_sensor']) is True:
threading_function(get_cputemp_data, **config)
if bool(config['use_BME280_sensor']) is True:
threading_function(get_bme280_data, **config)
if bool(config['use_DS18B20_sensor']) is True:
threading_function(get_ds18b20_data, **config)
if bool(config['use_DHT_sensor']) is True:
threading_function(get_dht_data, **config)
if bool(config['use_weather_station']) is True:
threading_function(rainfall, **config)
threading_function(wind_speed, **config)
threading_function(wind_direction, **config)
if bool(config['use_serial_display']) is True:
threading_function(serial_displays, **config)
if bool(config['use_picamera']) is True and bool(
config['use_picamera_recording']) is False and bool(
config['use_door_sensor']) is False and bool(
config['use_motion_sensor']) is False:
av_stream('start')
pause()
from gpiozero import Button, LED from gpiozero.tools import all_values from signal import pause button_a = Button(2) button_b = Button(3) led = LED(17) led.source = all_values(button_a, button_b) pause()
from gpiozero import LED, Button from gpiozero.tools import all_values, any_values, negated from signal import pause in_1 = Button(23) in_2 = Button(15) out_1 = LED(24) out_2 = LED(18) out_3 = LED(14) out_1.source = all_values(in_1.values, in_2.values) out_2.source = any_values(in_1.values, in_2.values) out_3.source = negated(out_1.values) pause()
from gpiozero import Button, LED from gpiozero.tools import all_values from signal import pause button_a = Button(2) button_b = Button(3) led = LED(17) led.source = all_values(button_a.values, button_b.values) pause()
from gpiozero import LED from gpiozero.pins.pigpio import PiGPIOFactory from gpiozero.tools import all_values from signal import pause factory3 = PiGPIOFactory(host='192.168.1.3') factory4 = PiGPIOFactory(host='192.168.1.4') led = LED(17) button_1 = Button(17, pin_factory=factory3) button_2 = Button(17, pin_factory=factory4) led.source = all_values(button_1.values, button_2.values) pause()
def main():
#from picamera import PiCamera
from gpiozero import LED, Button, MotionSensor
from gpiozero.tools import all_values, any_values
from signal import pause
#import logging
import sys
print('# RPiMS is running #')
try:
db_connect('localhost', 0)
except Exception as err :
print("Blad połączenia")
sys.exit(1)
#redis_db.flushdb()
for key in redis_db.scan_iter("motion_sensor_*"):
redis_db.delete(key)
for key in redis_db.scan_iter("door_sensor_*"):
redis_db.delete(key)
config_yaml=config_load('/var/www/html/conf/rpims.yaml')
config = config_yaml['setup']
zabbix_agent = config_yaml['zabbix_agent']
hostnamectl_sh(**zabbix_agent)
if bool(config['use_door_sensor']) is True:
global door_sensors_list
door_sensors_list = {}
redis_db.delete("door_sensors")
for item in config_yaml.get("door_sensors"):
door_sensors_list[item] = Button(config_yaml['door_sensors'][item]['gpio_pin'], hold_time=config_yaml['door_sensors'][item]['hold_time'])
redis_db.sadd("door_sensors", item)
if bool(config['use_motion_sensor']) is True:
global motion_sensors_list
motion_sensors_list = {}
redis_db.delete("motion_sensors")
for item in config_yaml.get("motion_sensors"):
motion_sensors_list[item] = MotionSensor(config_yaml['motion_sensors'][item]['gpio_pin'])
redis_db.sadd("motion_sensors", item)
if bool(config['use_system_buttons']) is True:
global system_buttons_list
system_buttons_list = {}
for item in config_yaml.get("system_buttons"):
system_buttons_list[item] = Button(config_yaml['system_buttons'][item]['gpio_pin'], hold_time=config_yaml['system_buttons'][item]['hold_time'])
if bool(config['use_led_indicators']) is True:
global led_indicators_list
led_indicators_list = {}
for item in config_yaml.get("led_indicators"):
led_indicators_list[item] = LED(config_yaml['led_indicators'][item]['gpio_pin'])
if bool(config['verbose']) is True :
print('')
for s in config :
redis_db.set(s, str(config[s]))
if bool(config['verbose']) is True :
print(s + ' = ' + str(config[s]))
if bool(config['verbose']) is True :
print('')
for s in zabbix_agent :
redis_db.set(s, str(zabbix_agent[s]))
if bool(config['verbose']) is True :
print(s + ' = ' + str(zabbix_agent[s]))
if bool(config['verbose']) is True :
print('')
if bool(config['use_door_sensor']) is True :
for s in door_sensors_list:
if door_sensors_list[s].value == 0:
door_status_open(s,**config)
else:
door_status_close(s,**config)
for s in door_sensors_list:
door_sensors_list[s].when_held = lambda s=s : door_action_closed(s,**config)
door_sensors_list[s].when_released = lambda s=s : door_action_opened(s,**config)
if bool(config['use_led_indicators']) is True :
led_indicators_list['door_led'].source = all_values(*door_sensors_list.values())
if bool(config['use_motion_sensor']) is True :
for s in motion_sensors_list:
if motion_sensors_list[s].value == 0:
motion_sensor_when_no_motion(s,**config)
else:
motion_sensor_when_motion(s,**config)
for s in motion_sensors_list:
motion_sensors_list[s].when_motion = lambda s=s : motion_sensor_when_motion(s,**config)
motion_sensors_list[s].when_no_motion = lambda s=s : motion_sensor_when_no_motion(s,**config)
if bool(config['use_led_indicators']) is True :
led_indicators_list['motion_led'].source = any_values(*motion_sensors_list.values())
if bool(config['use_system_buttons']) is True:
system_buttons_list['shutdown_button'].when_held = shutdown
if bool(config['use_CPU_sensor']) is True:
threading_function(get_cputemp_data, **config)
if bool(config['use_BME280_sensor']) is True:
threading_function(get_bme280_data, **config)
if bool(config['use_DS18B20_sensor']) is True:
threading_function(get_ds18b20_data, **config)
if bool(config['use_DHT_sensor']) is True:
threading_function(get_dht_data, **config)
if bool(config['use_weather_station']) is True:
threading_function(rainfall, **config)
threading_function(wind_speed, **config)
threading_function(wind_direction, **config)
if bool(config['use_serial_display']) is True:
threading_function(serial_displays, **config)
if bool(config['use_picamera']) is True and bool(config['use_picamera_recording']) is False and bool(config['use_door_sensor']) is False and bool(config['use_motion_sensor']) is False :
av_stream('start')
pause()
from gpiozero import LED, MotionSensor, LightSensor from gpiozero.tools import booleanized, all_values from signal import pause garden = LED(2) motion = MotionSensor(4) light = LightSensor(5) garden.source = all_values(booleanized(light, 0, 0.1), motion) pause()
