def sample(self, policy, condition, verbose=True, save=True, noisy=True):
"""This is the main method run when the Agent object is called by GPS.
Draws a sample from the environment, using the specified policy and
under the specified condition.
If "save" is True, then append the sample object of type Sample to
self._samples[condition].
TensorFlow is not yet implemented (FIXME)."""
# Reset the arm to initial configuration at start of each new trial.
self.reset(condition)
# Generate noise to be used in the policy object to compute next state.
if noisy:
noise = generate_noise(self.T, self.dU, self._hyperparams)
else:
noise = np.zeros((self.T, self.dU))
# Execute the trial.
sample_data = self._run_trial(
policy, noise, time_to_run=self._hyperparams['trial_timeout'])
# Write trial data into sample object.
sample = Sample(self)
for sensor_id, data in sample_data.iteritems():
sample.set(sensor_id, np.asarray(data))
# Save the sample to the data structure. This is controlled by gps_main.py.
if save:
self._samples[condition].append(sample)
return sample
def _roll_out(self, pol, itr, cond, i):
if self.use_mpc and itr > 0:
T = self.agent.T
M = self.mpc_agent.T
N = int(ceil(T / (M - 1.)))
X_t = self.agent.x0[cond]
# Only forward pass one time per cond,
# because this same for all sample
if i == 0:
# Note: At this time algorithm.prev = algorithm.cur,
# and prev.traj_info already have x0mu, x0sigma.
self.off_prior, _ = self.algorithm.traj_opt.forward(
pol, self.algorithm.prev[cond].traj_info)
self.agent.publish_plan(self.off_prior)
if type(self.algorithm) == AlgorithmTrajOpt:
pol_info = None
else:
pol_info = self.algorithm.cur[cond].pol_info
for n in range(N):
# Note: M-1 because action[M] = [0,0].
t_traj = n * (M - 1)
reset = True if (n == 0) else False
mpc_pol, mpc_state = self.algorithm.mpc[cond][i].update(
n, X_t, self.off_prior, pol,
self.algorithm.cur[cond].traj_info, t_traj, pol_info)
self.agent.publish_plan(mpc_state, True)
new_sample = self.mpc_agent.sample(
mpc_pol,
cond,
reset=reset,
noisy=True,
verbose=(i < self._hyperparams['verbose_trials']))
X_t = new_sample.get_X(t=M - 1)
"""
Merge sample for optimize offline trajectory distribution
"""
full_sample = Sample(self.agent)
sample_lists = self.mpc_agent.get_samples(cond)
keys = sample_lists[0]._data.keys()
t = 0
for sample in sample_lists:
for m in range(sample.T - 1):
for sensor in keys:
full_sample.set(sensor, sample.get(sensor, m), t)
t = t + 1
if t + 1 > T:
break
self.agent._samples[cond].append(full_sample)
# Clear agent samples.
self.mpc_agent.clear_samples()
else:
self.agent.sample(
pol, cond, verbose=(i < self._hyperparams['verbose_trials']))
def _init_sample(self, T=None):
"""
Construct a new sample and fill in the first time step.
"""
sample = Sample(self, T)
self._advance_simulation()
for sensor in self._sensor_types:
sample.set(sensor, self._sensor_readings[sensor], t=0)
return sample
def msg_to_sample(ros_msg, agent):
"""
Convert a SampleResult ROS message into a Sample Python object.
"""
sample = Sample(agent)
for sensor in ros_msg.sensor_data:
sensor_id = sensor.data_type
shape = np.array(sensor.shape)
data = np.array(sensor.data).reshape(shape)
sample.set(sensor_id, data)
return sample
def msg_to_sample(ros_msg, agent):
"""
Convert a SampleResult ROS message into a Sample Python object.
"""
sample = Sample(agent)
for sensor in ros_msg.sensor_data:
sensor_id = sensor.data_type
shape = np.array(sensor.shape)
data = np.array(sensor.data).reshape(shape)
sample.set(sensor_id, data)
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
# Initialize world/run kinematics
#self._init(condition)
# Initialize sample with stuff from _data
# pdb.set_trace()
# get data from mj_world, condition-specific
data = self._world[condition].reset(self._full_init_state[condition])
# data = self._world[condition].reset()
sample.set(END_EFFECTOR_POINTS, data[0:8],
t=0) #Set _data in sample class
sample.set(JOINT_VELOCITIES, data[8:17], t=0)
sample.set(JOINT_ANGLES, data[17:20], t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, data[20:23], t=0)
#sample.set(END_EFFECTOR_POINT_JACOBIANS, np.array(0.0), t=0)
return sample
def msg_to_sample(ros_msg, agent):
"""
Convert a SampleResult ROS message into a Sample Python object.
"""
sample = Sample(agent)
# Sensor_data
# int32 id
# DataType[] sensor_data
for sensor in ros_msg.sensor_data:
sensor_id = sensor.data_type
shape = np.array(sensor.shape)
data = np.array(sensor.data).reshape(shape)
sample.set(sensor_id, data) # Set trajectory data for a particular sensor.
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
# Initialize world/run kinematics
#self._init(condition)
# Initialize sample with stuff from _data
data = self._world[condition].reset(
) #get data from mj_world, condition-specific
sample.set(JOINT_ANGLES, data[0:7], t=0) #Set _data in sample class
sample.set(JOINT_VELOCITIES, data[7:14], t=0)
sample.set(END_EFFECTOR_POINTS, data[14:24], t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, data[24:34], t=0)
sample.set(END_EFFECTOR_POINT_JACOBIANS, 0.0, t=0)
def _init_sample(self, condition):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
"""
sample = Sample(self)
sample.set(JOINT_ANGLES,
self._hyperparams['x0'][condition][self._joint_idx], t=0)
sample.set(JOINT_VELOCITIES,
self._hyperparams['x0'][condition][self._vel_idx], t=0)
self._data = self._world[condition].get_data()
eepts = self._data['site_xpos'].flatten()
sample.set(END_EFFECTOR_POINTS, eepts, t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.zeros_like(eepts), t=0)
jac = np.zeros([eepts.shape[0], self._model[condition]['nq']])
for site in range(eepts.shape[0] // 3):
idx = site * 3
jac[idx:(idx+3), :] = self._world[condition].get_jac_site(site)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac, t=0)
return sample
def _init_sample(self, condition):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
"""
sample = Sample(self)
sample.set(JOINT_ANGLES,
self._hyperparams['x0'][condition][self._joint_idx],
t=0)
sample.set(JOINT_VELOCITIES,
self._hyperparams['x0'][condition][self._vel_idx],
t=0)
self._data = self._world.get_data()
eepts = self._data['site_xpos'].flatten()
sample.set(END_EFFECTOR_POINTS, eepts, t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.zeros_like(eepts), t=0)
jac = np.zeros([eepts.shape[0], self._model[condition]['nq']])
for site in range(eepts.shape[0] // 3):
idx = site * 3
jac[idx:(idx + 3), :] = self._world.get_jac_site(site)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac, t=0)
return sample
def _init_sample(self, b2d_X):
"""
Construct a new sample and fill in the first time step.
"""
sample = Sample(self)
self._set_sample(sample, b2d_X, -1)
feature_fn = None
if RGB_IMAGE in self.obs_data_types:
## TODO : replace below line with other function
# ex 1:
# self.img = self.baxter.get_baxter_camera_image()
# sample.set(RGB_IMAGE, np.transpose(self.img, (2, 1, 0)).flatten(), t = 0)
# ex 2:
# sample.set(RGB_IMAGE, img_data, t=0)
sample.set(RGB_IMAGE_SIZE, [
self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']
],
t=None)
if IMAGE_FEAT in self.obs_data_types:
raise ValueError(
'Image features should not be in observation, just state')
if feature_fn is not None:
obs = sample.get_obs(
) # Assumes that the rest of the sample has been populated
sample.set(IMAGE_FEAT, feature_fn(obs), t=0)
else:
sample.set(
IMAGE_FEAT,
np.zeros((self._hyperparams['sensor_dims'][IMAGE_FEAT], )),
t=0)
return sample
def _init_sample(self, condition):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
"""
sample = Sample(self)
# Initialize world/run kinematics
self._init(condition)
# Initialize sample with stuff from _data
data = self._world[condition].get_data()
sample.set(JOINT_ANGLES, data['qpos'].flatten(), t=0)
sample.set(JOINT_VELOCITIES, data['qvel'].flatten(), t=0)
eepts = data['site_xpos'].flatten()
sample.set(END_EFFECTOR_POINTS, eepts, t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.zeros_like(eepts), t=0)
jac = np.zeros([eepts.shape[0], self._model[condition]['nq']])
for site in range(eepts.shape[0] // 3):
idx = site * 3
jac[idx:(idx + 3), :] = self._world[condition].get_jac_site(site)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac, t=0)
# save initial image to meta data
self._world[condition].plot(self._hyperparams['x0'][condition])
img = self._world[condition].get_image_scaled(
self._hyperparams['image_width'],
self._hyperparams['image_height'])
# mjcpy image shape is [height, width, channels],
# dim-shuffle it for later conv-net processing,
# and flatten for storage
img_data = np.transpose(img["img"], (1, 0, 2)).flatten()
# if initial image is an observation, replicate it for each time step
if CONTEXT_IMAGE in self.obs_data_types:
sample.set(CONTEXT_IMAGE, np.tile(img_data, (self.T, 1)), t=None)
else:
sample.set(CONTEXT_IMAGE, img_data, t=None)
sample.set(CONTEXT_IMAGE_SIZE,
np.array([
self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']
]),
t=None)
# only save subsequent images if image is part of observation
if RGB_IMAGE in self.obs_data_types:
sample.set(RGB_IMAGE, img_data, t=0)
sample.set(RGB_IMAGE_SIZE, [
self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']
],
t=None)
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
# Initialize world/run kinematics
q = [self._trial_arm.joint_angle(j) for j in self.joint_names]
dq = [self._trial_arm.joint_velocity(j) for j in self.joint_names]
pos = list(self._trial_arm.endpoint_pose()['position'])
orn = list(self._trial_arm.endpoint_pose()['orientation'])
dpos = list(self._trial_arm.endpoint_velocity()['linear'])
dorn = list(self._trial_arm.endpoint_velocity()['angular'])
jac = self._kin_trial.jacobian()
sample.set(JOINT_ANGLES, np.asarray(q), t=0)
sample.set(JOINT_VELOCITIES, np.asarray(dq), t=0)
sample.set(END_EFFECTOR_POINTS, np.asarray(pos), t=0)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac[:3, :], t=0)
img_subs = self.img_subs_list[0]
depth_subs = self.depth_subs_list[0]
image = img_subs.img
depth_rescaled = self.get_depth_img(depth_subs)
all_visual_features, all_centroids, fig = self._get_rcnn_features(
image, depth_rescaled)
try:
delta_centroid = all_centroids[0] - all_centroids[1]
except:
delta_centroid = np.array([30, 30, 30])
# print(all_centroids)
# set_trace()# image_buffer.append(image[:,:,::-1])
feat_visual_1, feat_visual_2, feat_visual_max_1, feat_visual_max_2 = self._apply_feature_selection(
all_visual_features)
embedding = np.concatenate([
delta_centroid, feat_visual_1, feat_visual_max_1, feat_visual_2,
feat_visual_max_2
])
sample.set(TCN_EMBEDDING, embedding, t=0)
if fig is not None:
canvas = FigureCanvas(fig)
ax = fig.gca()
canvas.draw() # draw the canvas, cache the renderer
img = np.array(fig.canvas.renderer._renderer)
sample.set(RCNN_OUTPUT, img, t=0)
sample.set(RGB_IMAGE, image, t=0)
plt.close(fig)
else:
sample.set(RGB_IMAGE, image, t=0)
sample.set(RCNN_OUTPUT, np.zeros((800, 800, 4)), t=0)
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
# Initialize world/run kinematics
self._init(condition)
# Initialize sample with stuff from _data
data = self._world[condition].get_data()
sample.set(JOINT_ANGLES, data['qpos'].flatten(), t=0)
sample.set(JOINT_VELOCITIES, data['qvel'].flatten(), t=0)
eepts = data['site_xpos'].flatten()
sample.set(END_EFFECTOR_POINTS, eepts, t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.zeros_like(eepts), t=0)
if (END_EFFECTOR_POINTS_NO_TARGET in self._hyperparams['obs_include']):
sample.set(END_EFFECTOR_POINTS_NO_TARGET, np.delete(eepts, self._hyperparams['target_idx']), t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES_NO_TARGET, np.delete(np.zeros_like(eepts), self._hyperparams['target_idx']), t=0)
jac = np.zeros([eepts.shape[0], self._model[condition]['nq']])
for site in range(eepts.shape[0] // 3):
idx = site * 3
jac[idx:(idx+3), :] = self._world[condition].get_jac_site(site)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac, t=0)
# save initial image to meta data
self._world[condition].plot(self._hyperparams['x0'][condition])
img = self._world[condition].get_image_scaled(self._hyperparams['image_width'],
self._hyperparams['image_height'])
# mjcpy image shape is [height, width, channels],
# dim-shuffle it for later conv-net processing,
# and flatten for storage
img_data = np.transpose(img["img"], (2, 1, 0)).flatten()
# if initial image is an observation, replicate it for each time step
if CONTEXT_IMAGE in self.obs_data_types:
sample.set(CONTEXT_IMAGE, np.tile(img_data, (self.T, 1)), t=None)
else:
sample.set(CONTEXT_IMAGE, img_data, t=None)
sample.set(CONTEXT_IMAGE_SIZE, np.array([self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']]), t=None)
# only save subsequent images if image is part of observation
if RGB_IMAGE in self.obs_data_types:
sample.set(RGB_IMAGE, img_data, t=0)
sample.set(RGB_IMAGE_SIZE, [self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']], t=None)
if IMAGE_FEAT in self.obs_data_types:
raise ValueError('Image features should not be in observation, just state')
if feature_fn is not None:
obs = sample.get_obs() # Assumes that the rest of the sample has been populated
sample.set(IMAGE_FEAT, feature_fn(obs), t=0)
else:
# TODO - need better solution than setting this to 0.
sample.set(IMAGE_FEAT, np.zeros((self._hyperparams['sensor_dims'][IMAGE_FEAT],)), t=0)
return sample
def _init_sample(self, condition):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
"""
sample = Sample(self)
sample.set(JOINT_ANGLES,
self._hyperparams['x0'][condition][self._joint_idx], t=0)
sample.set(JOINT_VELOCITIES,
self._hyperparams['x0'][condition][self._vel_idx], t=0)
self._data = self._world[condition].get_data()
eepts = self._data['site_xpos'].flatten()
sample.set(END_EFFECTOR_POINTS, eepts, t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.zeros_like(eepts), t=0)
jac = np.zeros([eepts.shape[0], self._model[condition]['nq']])
for site in range(eepts.shape[0] // 3):
idx = site * 3
jac[idx:(idx+3), :] = self._world[condition].get_jac_site(site)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac, t=0)
# save initial image to meta data
self._world[condition].plot(self._hyperparams['x0'][condition])
img = self._world[condition].get_image_scaled(self._hyperparams['image_width'],
self._hyperparams['image_height'])
# mjcpy image shape is [height, width, channels],
# dim-shuffle it for later conv-net processing,
# and flatten for storage
img_data = np.transpose(img["img"], (2, 1, 0)).flatten()
# if initial image is an observation, replicate it for each time step
if CONTEXT_IMAGE in self.obs_data_types:
sample.set(CONTEXT_IMAGE, np.tile(img_data, (self.T, 1)), t=None)
else:
sample.set(CONTEXT_IMAGE, img_data, t=None)
sample.set(CONTEXT_IMAGE_SIZE, np.array([self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']]), t=None)
# only save subsequent images if image is part of observation
if RGB_IMAGE in self.obs_data_types:
sample.set(RGB_IMAGE, img_data, t=0)
sample.set(RGB_IMAGE_SIZE, [self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']], t=None)
return sample
def sample(self, policy, condition, save=True, noisy=True, reset_cond=None, **kwargs):
"""
Reset and execute a policy and collect a sample.
Args:
policy: A Policy object.
condition: Which condition setup to run.
verbose: Unused for this agent.
save: Whether or not to store the trial into the samples.
noisy: Whether or not to use noise during sampling.
use_TfController: Whether to use the syncronous TfController
Returns:
sample: A Sample object.
"""
# Get a new sample
sample = Sample(self)
sample_ok = False
while not sample_ok:
if not self.debug:
self.reset(reset_cond)
self.__init_opcua()
if noisy:
noise = generate_noise(self.T, self.dU, self._hyperparams)
else:
noise = np.zeros((self.T, self.dU))
# Execute policy over a time period of [0,T]
start = time.time()
for t in range(self.T):
# Read sensors and store sensor data in sample
def store_sensor(sensor):
sample.set(sensor, self.read_sensor(sensor), t)
self.pool.map(store_sensor, self.sensors)
# Override sensors
for override in self.sensor_overrides:
if override['condition'](t):
sensor = override['sensor']
sample.set(sensor, np.copy(override['value']), t)
print('X_%02d' % t, sample.get_X(t))
# Get action
U_t = policy.act(sample.get_X(t), sample.get_obs(t), t, noise)
# Override actuators
for override in self.actuator_overrides:
if override['condition'](t):
actuator = override['actuator']
U_t[self._u_data_idx[actuator]] = np.copy(override['value'])
# Send signals
self.send_signals(t)
# Perform action
for actuator in self._u_data_idx:
self.write_actuator(actuator, U_t[self._u_data_idx[actuator]])
sample.set(ACTION, U_t, t)
print('U_%02d' % t, U_t)
# Check if agent is keeping up
sleep_time = start + (t + 1) * self.dt - time.time()
if sleep_time < 0:
logging.critical("Agent can't keep up. %fs bedind." % sleep_time)
elif sleep_time < self.dt / 2:
logging.warning(
"Agent may not keep up (%.0f percent busy)" % (((self.dt - sleep_time) / self.dt) * 100)
)
# Wait for next timestep
if sleep_time > 0 and not self.debug:
time.sleep(sleep_time)
if save:
self._samples[condition].append(sample)
self.active = False
self.finalize_sample()
sample_ok = input('Continue?') == 'y'
if not sample_ok:
print('Repeating')
return sample
def sample(
self,
policy,
condition,
verbose=True,
save=True,
noisy=True,
use_TfController=False,
timeout=None,
reset_cond=None,
record=False
):
"""
Reset and execute a policy and collect a sample.
Args:
policy: A Policy object.
condition: Which condition setup to run.
verbose: Unused for this agent.
save: Whether or not to store the trial into the samples.
noisy: Whether or not to use noise during sampling.
use_TfController: Whether to use the syncronous TfController
Returns:
sample: A Sample object.
"""
if noisy:
noise = generate_noise(self.T, self.dU, self._hyperparams)
else:
noise = np.zeros((self.T, self.dU))
# Get a new sample
sample = Sample(self)
self.env.video_callable = lambda episode_id, record=record: record
# Get initial state
self.env.seed(None if reset_cond is None else self.x0[reset_cond])
obs = self.env.reset()
if self._hyperparams.get('initial_step', 0) > 0:
# Take one random step to get a slightly random initial state distribution
U_initial = (self.env.action_space.high - self.env.action_space.low
) / 12 * np.random.normal(size=self.dU) * self._hyperparams['initial_step']
obs = self.env.step(U_initial)[0]
self.set_states(sample, obs, 0)
U_0 = policy.act(sample.get_X(0), sample.get_obs(0), 0, noise)
sample.set(ACTION, U_0, 0)
for t in range(1, self.T):
if not record and self.render:
self.env.render(mode='human') # TODO add hyperparam
# Get state
obs, _, done, _ = self.env.step(sample.get_U(t - 1))
self.set_states(sample, obs, t)
# Get action
U_t = policy.act(sample.get_X(t), sample.get_obs(t), t, noise)
sample.set(ACTION, U_t, t)
if done and t < self.T - 1:
raise Exception('Iteration ended prematurely %d/%d' % (t + 1, self.T))
if save:
self._samples[condition].append(sample)
self.active = False
#print("X", sample.get_X())
#print("U", sample.get_U())
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
self.indy.joint_move_to(self._hyperparams[‘x0’][condition][0:6])
# Initialize sample with stuff from _data
# indy : get joint positions
self.prev_positions = self.indy.get_joint_pos()
## TODO : replace below line with indy function
# get indy joint positions
sample.set(JOINT_ANGLES, self.prev_positions, t=0)
# get indy joint velocities
sample.set(JOINT_VELOCITIES, self.indy.get_joint_vel(), t=0)
# get indy end effector positions
ee_point = self.indy.get_task_pos()[:3]
sample.set(END_EFFECTOR_POINTS, ee_point, t=0)
# sample.set(END_EFFECTOR_POINTS, list(ee_point), t=t+1)
# get indy end effector velocity
vel = self.indy.get_task_vel()
ee_vel = vel[:3]
ee_omg = vel[3:]
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.array(list(ee_vel) + list(ee_omg)), t=0)
# get indy jacobian
### please add a function that retreive jacobian matrix here.
sample.set(END_EFFECTOR_POINT_JACOBIANS, self.indy, t=0)
## TODO : check whether below line is neccessary or not.
if (END_EFFECTOR_POINTS_NO_TARGET in self._hyperparams['obs_include']):
sample.set(END_EFFECTOR_POINTS_NO_TARGET, np.delete(eepts, self._hyperparams['target_idx']), t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES_NO_TARGET, np.delete(np.zeros_like(eepts), self._hyperparams['target_idx']), t=0)
## TODO : enable this again when after install camera
# only save subsequent images if image is part of observation
if RGB_IMAGE in self.obs_data_types:
## TODO : replace below line with other function
# ex 1:
# self.img = self.baxter.get_baxter_camera_image()
# sample.set(RGB_IMAGE, np.transpose(self.img, (2, 1, 0)).flatten(), t = 0)
# ex 2:
# sample.set(RGB_IMAGE, img_data, t=0)
sample.set(RGB_IMAGE_SIZE, [self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']], t=None)
if IMAGE_FEAT in self.obs_data_types:
raise ValueError('Image features should not be in observation, just state')
if feature_fn is not None:
obs = sample.get_obs() # Assumes that the rest of the sample has been populated
sample.set(IMAGE_FEAT, feature_fn(obs), t=0)
else:
sample.set(IMAGE_FEAT, np.zeros((self._hyperparams['sensor_dims'][IMAGE_FEAT],)), t=0)
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
"""
sample = Sample(self)
## modified
#self.baxter.move_baxter_to_joint_positions([1.05, -0.01, 0.20, 0.50, 0.47, 0.80, -0.14])
#self.baxter.move_baxter_to_joint_positions([0.27, -1.14, 0.98, 1.60, 0.15, 0.51, 0.27]) # for block_inserting task
#self.baxter.move_baxter_to_joint_positions([0.32, -0.71, 0.68, 1.09, 0.07, 0.76, 0.13]) # for ball_punching task
#self.baxter.move_baxter_to_joint_positions(self._hyperparams['x0'][condition][0:7])
#self.baxter.initialize_left_arm([-0.22549517556152346, 0.36815538867187503, -1.5040681608032227, 0.5817622131408692, -0.5012282218688965, 1.8553497608276368, 0.08935438079223633]) # for block_inserting task
self.baxter.initialize_left_arm(
self._hyperparams['initial_left_arm'][condition]) # grasping task
self.cnt = 0
self.prev_positions = self.baxter.get_baxter_joint_angles_positions()
# sample.set(JOINT_ANGLES, np.array(self.baxter.get_baxter_joint_angles_positions()), t=0)
sample.set(JOINT_ANGLES, np.array(self.prev_positions), t=0)
sample.set(JOINT_VELOCITIES,
np.array(self.baxter.get_baxter_joint_angles_velocities()),
t=0)
sample.set(END_EFFECTOR_POINTS,
np.array(self.baxter.get_baxter_end_effector_pose()),
t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES,
np.array(self.baxter.get_baxter_end_effector_velocity()),
t=0)
sample.set(END_EFFECTOR_POINT_JACOBIANS,
np.array(self.baxter.get_baxter_end_effector_jacobian()),
t=0)
## NEED TO ADD SENSOR 'RGB_IMAGE'
## NEED TO ADD 'get_baxter_camera_image()' in 'baxter_methods.py'
if RGB_IMAGE in self.obs_data_types:
#self.baxter.get_baxter_camera_open()
self.img = self.baxter.get_baxter_camera_image()
np.savez('camera_image_blind_' + str(condition) + '.npz',
img=self.img)
## NEED TO CHECK IMAGE SHAPE
## NEED TO CHECK IMAGE TYPE - INT? / FLOAT?
## MUJOCO: [HEIGHT, WIDTH, CHANNELS] == [300, 480, 3]
sample.set(RGB_IMAGE,
np.transpose(self.img, (2, 1, 0)).flatten(),
t=0)
sample.set(RGB_IMAGE_SIZE, [
self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']
],
t=None)
if IMAGE_FEAT in self.obs_data_types:
raise ValueError(
'Image features should not be in observation, just state')
if feature_fn is not None:
obs = sample.get_obs()
sample.set(IMAGE_FEAT, feature_fn(obs), t=0)
else:
sample.set(
IMAGE_FEAT,
np.zeros((self._hyperparams['sensor_dims'][IMAGE_FEAT], )),
t=0)
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
# Initialize world/run kinematics
self._init(condition)
# Initialize sample with stuff from _data
data = self._world[condition].get_data()
sample.set(JOINT_ANGLES, data['qpos'].flatten(), t=0)
sample.set(JOINT_VELOCITIES, data['qvel'].flatten(), t=0)
eepts = data['site_xpos'].flatten()
sample.set(END_EFFECTOR_POINTS, eepts, t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.zeros_like(eepts), t=0)
if (END_EFFECTOR_POINTS_NO_TARGET in self._hyperparams['obs_include']):
sample.set(END_EFFECTOR_POINTS_NO_TARGET, np.delete(eepts, self._hyperparams['target_idx']), t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES_NO_TARGET, np.delete(np.zeros_like(eepts), self._hyperparams['target_idx']), t=0)
jac = np.zeros([eepts.shape[0], self._model[condition]['nq']])
for site in range(eepts.shape[0] // 3):
idx = site * 3
jac[idx:(idx+3), :] = self._world[condition].get_jac_site(site)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac, t=0)
# save initial image to meta data
self._world[condition].plot(self._hyperparams['x0'][condition])
img = self._world[condition].get_image_scaled(self._hyperparams['image_width'],
self._hyperparams['image_height'])
# mjcpy image shape is [height, width, channels],
# dim-shuffle it for later conv-net processing,
# and flatten for storage
img_data = np.transpose(img["img"], (2, 1, 0)).flatten()
# if initial image is an observation, replicate it for each time step
if CONTEXT_IMAGE in self.obs_data_types:
sample.set(CONTEXT_IMAGE, np.tile(img_data, (self.T, 1)), t=None)
else:
sample.set(CONTEXT_IMAGE, img_data, t=None)
sample.set(CONTEXT_IMAGE_SIZE, np.array([self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']]), t=None)
# only save subsequent images if image is part of observation
if RGB_IMAGE in self.obs_data_types:
sample.set(RGB_IMAGE, img_data, t=0)
sample.set(RGB_IMAGE_SIZE, [self._hyperparams['image_channels'],
self._hyperparams['image_width'],
self._hyperparams['image_height']], t=None)
if IMAGE_FEAT in self.obs_data_types:
raise ValueError('Image features should not be in observation, just state')
if feature_fn is not None:
obs = sample.get_obs() # Assumes that the rest of the sample has been populated
sample.set(IMAGE_FEAT, feature_fn(obs), t=0)
else:
# TODO - need better solution than setting this to 0.
sample.set(IMAGE_FEAT, np.zeros((self._hyperparams['sensor_dims'][IMAGE_FEAT],)), t=0)
return sample
def _init_sample(self, condition, feature_fn=None):
"""
Construct a new sample and fill in the first time step.
Args:
condition: Which condition to initialize.
feature_fn: funciton to comptue image features from the observation.
"""
sample = Sample(self)
# Initialize world/run kinematicscost
jac = self._kin_trial.jacobian()
X, image = self._get_current_state(t=0)
if self.take_video:
self.rgb_writer.append_data(image)
# X = np.concatenate([geom_dist_ee_to_anchor, geom_dist_object2_to_anchor, pos, dpos, gripper_binary])
geom_dist_ee_to_anchor = X[0:3]
geom_dist_object2_to_anchor = X[3:6]
pos = X[6:9]
dpos = X[9:12]
gripper_binary = X[12]
q = X[13:20]
dq = X[20:27]
emb = X[27:28]
sample.set(OBJECT_POSE,
np.concatenate(
[geom_dist_ee_to_anchor, geom_dist_object2_to_anchor]),
t=0)
sample.set(JOINT_ANGLES, np.asarray(q), t=0)
sample.set(JOINT_VELOCITIES, np.asarray(dq), t=0)
sample.set(END_EFFECTOR_POINTS, pos, t=0)
sample.set(END_EFFECTOR_POINT_JACOBIANS, jac[:3, :], t=0)
sample.set(END_EFFECTOR_POINT_VELOCITIES, np.asarray(dpos), t=0)
sample.set(IMAGE_FEATURE, np.asarray(emb), t=0)
# sample.set(END_EFFECTOR_ORIENTATIONS, np.asarray(orn), t=0)
# sample.set(END_EFFECTOR_ANGULAR_VELOCITIES, np.asarray(dorn), t=0)
return X, sample