def run(self):
while state.shutdown == 0:
queueValue = queues.addressGeneratorQueue.get()
nonceTrialsPerByte = 0
payloadLengthExtraBytes = 0
live = True
if queueValue[0] == 'createChan':
command, addressVersionNumber, streamNumber, label, \
deterministicPassphrase, live = queueValue
eighteenByteRipe = False
numberOfAddressesToMake = 1
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif queueValue[0] == 'joinChan':
command, chanAddress, label, deterministicPassphrase, \
live = queueValue
eighteenByteRipe = False
addressVersionNumber = decodeAddress(chanAddress)[1]
streamNumber = decodeAddress(chanAddress)[2]
numberOfAddressesToMake = 1
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif len(queueValue) == 7:
command, addressVersionNumber, streamNumber, label, \
numberOfAddressesToMake, deterministicPassphrase, \
eighteenByteRipe = queueValue
try:
numberOfNullBytesDemandedOnFrontOfRipeHash = \
BMConfigParser().getint(
'bitmessagesettings',
'numberofnullbytesonaddress'
)
except:
if eighteenByteRipe:
numberOfNullBytesDemandedOnFrontOfRipeHash = 2
else:
# the default
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif len(queueValue) == 9:
command, addressVersionNumber, streamNumber, label, \
numberOfAddressesToMake, deterministicPassphrase, \
eighteenByteRipe, nonceTrialsPerByte, \
payloadLengthExtraBytes = queueValue
try:
numberOfNullBytesDemandedOnFrontOfRipeHash = \
BMConfigParser().getint(
'bitmessagesettings',
'numberofnullbytesonaddress'
)
except:
if eighteenByteRipe:
numberOfNullBytesDemandedOnFrontOfRipeHash = 2
else:
# the default
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif queueValue[0] == 'stopThread':
break
else:
logger.error(
'Programming error: A structure with the wrong number'
' of values was passed into the addressGeneratorQueue.'
' Here is the queueValue: %r\n', queueValue)
if addressVersionNumber < 3 or addressVersionNumber > 4:
logger.error(
'Program error: For some reason the address generator'
' queue has been given a request to create at least'
' one version %s address which it cannot do.\n',
addressVersionNumber)
if nonceTrialsPerByte == 0:
nonceTrialsPerByte = BMConfigParser().getint(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
if nonceTrialsPerByte < \
defaults.networkDefaultProofOfWorkNonceTrialsPerByte:
nonceTrialsPerByte = \
defaults.networkDefaultProofOfWorkNonceTrialsPerByte
if payloadLengthExtraBytes == 0:
payloadLengthExtraBytes = BMConfigParser().getint(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
if payloadLengthExtraBytes < \
defaults.networkDefaultPayloadLengthExtraBytes:
payloadLengthExtraBytes = \
defaults.networkDefaultPayloadLengthExtraBytes
if command == 'createRandomAddress':
queues.UISignalQueue.put(
('updateStatusBar',
tr._translate("MainWindow",
"Generating one new address")))
# This next section is a little bit strange. We're going
# to generate keys over and over until we find one
# that starts with either \x00 or \x00\x00. Then when
# we pack them into a Bitmessage address, we won't store
# the \x00 or \x00\x00 bytes thus making the address shorter.
startTime = time.time()
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix = 0
potentialPrivSigningKey = OpenSSL.rand(32)
potentialPubSigningKey = highlevelcrypto.pointMult(
potentialPrivSigningKey)
while True:
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix += 1
potentialPrivEncryptionKey = OpenSSL.rand(32)
potentialPubEncryptionKey = highlevelcrypto.pointMult(
potentialPrivEncryptionKey)
sha = hashlib.new('sha512')
sha.update(potentialPubSigningKey +
potentialPubEncryptionKey)
ripe = RIPEMD160Hash(sha.digest()).digest()
if (ripe[:numberOfNullBytesDemandedOnFrontOfRipeHash] ==
'\x00' *
numberOfNullBytesDemandedOnFrontOfRipeHash):
break
logger.info('Generated address with ripe digest: %s',
hexlify(ripe))
try:
logger.info(
'Address generator calculated %s addresses at %s'
' addresses per second before finding one with'
' the correct ripe-prefix.',
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix,
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix
/ (time.time() - startTime))
except ZeroDivisionError:
# The user must have a pretty fast computer.
# time.time() - startTime equaled zero.
pass
address = encodeAddress(addressVersionNumber, streamNumber,
ripe)
# An excellent way for us to store our keys
# is in Wallet Import Format. Let us convert now.
# https://en.bitcoin.it/wiki/Wallet_import_format
privSigningKey = '\x80' + potentialPrivSigningKey
checksum = hashlib.sha256(
hashlib.sha256(privSigningKey).digest()).digest()[0:4]
privSigningKeyWIF = arithmetic.changebase(
privSigningKey + checksum, 256, 58)
privEncryptionKey = '\x80' + potentialPrivEncryptionKey
checksum = hashlib.sha256(
hashlib.sha256(privEncryptionKey).digest()).digest()[0:4]
privEncryptionKeyWIF = arithmetic.changebase(
privEncryptionKey + checksum, 256, 58)
BMConfigParser().add_section(address)
BMConfigParser().set(address, 'label', label)
BMConfigParser().set(address, 'enabled', 'true')
BMConfigParser().set(address, 'decoy', 'false')
BMConfigParser().set(address, 'noncetrialsperbyte',
str(nonceTrialsPerByte))
BMConfigParser().set(address, 'payloadlengthextrabytes',
str(payloadLengthExtraBytes))
BMConfigParser().set(address, 'privsigningkey',
privSigningKeyWIF)
BMConfigParser().set(address, 'privencryptionkey',
privEncryptionKeyWIF)
BMConfigParser().save()
# The API and the join and create Chan functionality
# both need information back from the address generator.
queues.apiAddressGeneratorReturnQueue.put(address)
queues.UISignalQueue.put(
('updateStatusBar',
tr._translate(
"MainWindow",
"Done generating address. Doing work necessary"
" to broadcast it...")))
queues.UISignalQueue.put(
('writeNewAddressToTable', (label, address, streamNumber)))
shared.reloadMyAddressHashes()
if addressVersionNumber == 3:
queues.workerQueue.put(('sendOutOrStoreMyV3Pubkey', ripe))
elif addressVersionNumber == 4:
queues.workerQueue.put(
('sendOutOrStoreMyV4Pubkey', address))
elif command == 'createDeterministicAddresses' \
or command == 'getDeterministicAddress' \
or command == 'createChan' or command == 'joinChan':
if len(deterministicPassphrase) == 0:
logger.warning(
'You are creating deterministic'
' address(es) using a blank passphrase.'
' Bitmessage will do it but it is rather stupid.')
if command == 'createDeterministicAddresses':
queues.UISignalQueue.put(
('updateStatusBar',
tr._translate("MainWindow",
"Generating %1 new addresses.").arg(
str(numberOfAddressesToMake))))
signingKeyNonce = 0
encryptionKeyNonce = 1
# We fill out this list no matter what although we only
# need it if we end up passing the info to the API.
listOfNewAddressesToSendOutThroughTheAPI = []
for _ in range(numberOfAddressesToMake):
# This next section is a little bit strange. We're
# going to generate keys over and over until we find
# one that has a RIPEMD hash that starts with either
# \x00 or \x00\x00. Then when we pack them into a
# Bitmessage address, we won't store the \x00 or
# \x00\x00 bytes thus making the address shorter.
startTime = time.time()
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix = 0
while True:
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix += 1
potentialPrivSigningKey = hashlib.sha512(
deterministicPassphrase +
encodeVarint(signingKeyNonce)).digest()[:32]
potentialPrivEncryptionKey = hashlib.sha512(
deterministicPassphrase +
encodeVarint(encryptionKeyNonce)).digest()[:32]
potentialPubSigningKey = highlevelcrypto.pointMult(
potentialPrivSigningKey)
potentialPubEncryptionKey = highlevelcrypto.pointMult(
potentialPrivEncryptionKey)
signingKeyNonce += 2
encryptionKeyNonce += 2
sha = hashlib.new('sha512')
sha.update(potentialPubSigningKey +
potentialPubEncryptionKey)
ripe = RIPEMD160Hash(sha.digest()).digest()
if (ripe[:numberOfNullBytesDemandedOnFrontOfRipeHash]
== '\x00' *
numberOfNullBytesDemandedOnFrontOfRipeHash):
break
logger.info('Generated address with ripe digest: %s',
hexlify(ripe))
try:
logger.info(
'Address generator calculated %s addresses'
' at %s addresses per second before finding'
' one with the correct ripe-prefix.',
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix,
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix
/ (time.time() - startTime))
except ZeroDivisionError:
# The user must have a pretty fast computer.
# time.time() - startTime equaled zero.
pass
address = encodeAddress(addressVersionNumber, streamNumber,
ripe)
saveAddressToDisk = True
# If we are joining an existing chan, let us check
# to make sure it matches the provided Bitmessage address
if command == 'joinChan':
if address != chanAddress:
listOfNewAddressesToSendOutThroughTheAPI.append(
'chan name does not match address')
saveAddressToDisk = False
if command == 'getDeterministicAddress':
saveAddressToDisk = False
if saveAddressToDisk and live:
# An excellent way for us to store our keys is
# in Wallet Import Format. Let us convert now.
# https://en.bitcoin.it/wiki/Wallet_import_format
privSigningKey = '\x80' + potentialPrivSigningKey
checksum = hashlib.sha256(
hashlib.sha256(
privSigningKey).digest()).digest()[0:4]
privSigningKeyWIF = arithmetic.changebase(
privSigningKey + checksum, 256, 58)
privEncryptionKey = '\x80' + \
potentialPrivEncryptionKey
checksum = hashlib.sha256(
hashlib.sha256(
privEncryptionKey).digest()).digest()[0:4]
privEncryptionKeyWIF = arithmetic.changebase(
privEncryptionKey + checksum, 256, 58)
try:
BMConfigParser().add_section(address)
addressAlreadyExists = False
except:
addressAlreadyExists = True
if addressAlreadyExists:
logger.info(
'%s already exists. Not adding it again.',
address)
queues.UISignalQueue.put(
('updateStatusBar',
tr._translate(
"MainWindow",
"%1 is already in 'Your Identities'."
" Not adding it again.").arg(address)))
else:
logger.debug('label: %s', label)
BMConfigParser().set(address, 'label', label)
BMConfigParser().set(address, 'enabled', 'true')
BMConfigParser().set(address, 'decoy', 'false')
if command == 'joinChan' \
or command == 'createChan':
BMConfigParser().set(address, 'chan', 'true')
BMConfigParser().set(address, 'noncetrialsperbyte',
str(nonceTrialsPerByte))
BMConfigParser().set(address,
'payloadlengthextrabytes',
str(payloadLengthExtraBytes))
BMConfigParser().set(address, 'privSigningKey',
privSigningKeyWIF)
BMConfigParser().set(address, 'privEncryptionKey',
privEncryptionKeyWIF)
BMConfigParser().save()
queues.UISignalQueue.put(
('writeNewAddressToTable',
(label, address, str(streamNumber))))
listOfNewAddressesToSendOutThroughTheAPI.append(
address)
shared.myECCryptorObjects[ripe] = \
highlevelcrypto.makeCryptor(
hexlify(potentialPrivEncryptionKey))
shared.myAddressesByHash[ripe] = address
tag = hashlib.sha512(
hashlib.sha512(
encodeVarint(addressVersionNumber) +
encodeVarint(streamNumber) +
ripe).digest()).digest()[32:]
shared.myAddressesByTag[tag] = address
if addressVersionNumber == 3:
# If this is a chan address,
# the worker thread won't send out
# the pubkey over the network.
queues.workerQueue.put(
('sendOutOrStoreMyV3Pubkey', ripe))
elif addressVersionNumber == 4:
queues.workerQueue.put(
('sendOutOrStoreMyV4Pubkey', address))
queues.UISignalQueue.put(
('updateStatusBar',
tr._translate("MainWindow",
"Done generating address")))
elif saveAddressToDisk and not live \
and not BMConfigParser().has_section(address):
listOfNewAddressesToSendOutThroughTheAPI.append(
address)
# Done generating addresses.
if command == 'createDeterministicAddresses' \
or command == 'joinChan' or command == 'createChan':
queues.apiAddressGeneratorReturnQueue.put(
listOfNewAddressesToSendOutThroughTheAPI)
elif command == 'getDeterministicAddress':
queues.apiAddressGeneratorReturnQueue.put(address)
else:
raise Exception(
"Error in the addressGenerator thread. Thread was" +
" given a command it could not understand: " + command)
queues.addressGeneratorQueue.task_done()
def run(self):
while shared.shutdown == 0:
queueValue = shared.addressGeneratorQueue.get()
nonceTrialsPerByte = 0
payloadLengthExtraBytes = 0
if queueValue[0] == 'createChan':
command, addressVersionNumber, streamNumber, label, deterministicPassphrase = queueValue
eighteenByteRipe = False
numberOfAddressesToMake = 1
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif queueValue[0] == 'joinChan':
command, chanAddress, label, deterministicPassphrase = queueValue
eighteenByteRipe = False
addressVersionNumber = decodeAddress(chanAddress)[1]
streamNumber = decodeAddress(chanAddress)[2]
numberOfAddressesToMake = 1
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif len(queueValue) == 7:
command, addressVersionNumber, streamNumber, label, numberOfAddressesToMake, deterministicPassphrase, eighteenByteRipe = queueValue
try:
numberOfNullBytesDemandedOnFrontOfRipeHash = shared.config.getint(
'bitmessagesettings', 'numberofnullbytesonaddress')
except:
if eighteenByteRipe:
numberOfNullBytesDemandedOnFrontOfRipeHash = 2
else:
numberOfNullBytesDemandedOnFrontOfRipeHash = 1 # The default
elif len(queueValue) == 9:
command, addressVersionNumber, streamNumber, label, numberOfAddressesToMake, deterministicPassphrase, eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes = queueValue
try:
numberOfNullBytesDemandedOnFrontOfRipeHash = shared.config.getint(
'bitmessagesettings', 'numberofnullbytesonaddress')
except:
if eighteenByteRipe:
numberOfNullBytesDemandedOnFrontOfRipeHash = 2
else:
numberOfNullBytesDemandedOnFrontOfRipeHash = 1 # The default
elif queueValue[0] == 'stopThread':
break
else:
sys.stderr.write('Programming error: A structure with the wrong ' +
'number of values was passed into the addressGeneratorQueue. ' +
'Here is the queueValue: %s\n' % repr(queueValue))
if addressVersionNumber < 3 or addressVersionNumber > 4:
sys.stderr.write(
'Program error: For some reason the address generator queue has ' +
'been given a request to create at least one version %s address ' +
'which it cannot do.\n' % addressVersionNumber)
if nonceTrialsPerByte == 0:
nonceTrialsPerByte = shared.config.getint(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
if nonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte:
nonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if payloadLengthExtraBytes == 0:
payloadLengthExtraBytes = shared.config.getint(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
if payloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
payloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
if command == 'createRandomAddress':
shared.UISignalQueue.put(('updateStatusBar',
tr._translate("MainWindow",
"Generating one new address")))
# This next section is a little bit strange. We're going to generate keys over and over until we
# find one that starts with either \x00 or \x00\x00. Then when we pack them into a Bitmessage address,
# we won't store the \x00 or \x00\x00 bytes thus making the
# address shorter.
startTime = time.time()
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix = 0
potentialPrivSigningKey = OpenSSL.rand(32)
potentialPubSigningKey = highlevelcrypto.pointMult(potentialPrivSigningKey)
while True:
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix += 1
potentialPrivEncryptionKey = OpenSSL.rand(32)
potentialPubEncryptionKey = highlevelcrypto.pointMult(
potentialPrivEncryptionKey)
ripe = hashlib.new('ripemd160')
sha = hashlib.new('sha512')
sha.update(
potentialPubSigningKey + potentialPubEncryptionKey)
ripe.update(sha.digest())
if ripe.digest()[:numberOfNullBytesDemandedOnFrontOfRipeHash] == '\x00' * numberOfNullBytesDemandedOnFrontOfRipeHash:
break
logger.info('Generated address with ripe digest: %s' % hexlify(ripe.digest()))
try:
logger.info('Address generator calculated %s addresses at %s addresses per second before finding one with the correct ripe-prefix.' % (numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix, numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix / (time.time() - startTime)))
except ZeroDivisionError:
# The user must have a pretty fast computer. time.time() - startTime equaled zero.
pass
address = encodeAddress(addressVersionNumber, streamNumber, ripe.digest())
# An excellent way for us to store our keys is in Wallet Import Format. Let us convert now.
# https://en.bitcoin.it/wiki/Wallet_import_format
privSigningKey = '\x80' + potentialPrivSigningKey
checksum = hashlib.sha256(hashlib.sha256(
privSigningKey).digest()).digest()[0:4]
privSigningKeyWIF = arithmetic.changebase(
privSigningKey + checksum, 256, 58)
privEncryptionKey = '\x80' + potentialPrivEncryptionKey
checksum = hashlib.sha256(hashlib.sha256(
privEncryptionKey).digest()).digest()[0:4]
privEncryptionKeyWIF = arithmetic.changebase(
privEncryptionKey + checksum, 256, 58)
shared.config.add_section(address)
shared.config.set(address, 'label', label)
shared.config.set(address, 'enabled', 'true')
shared.config.set(address, 'decoy', 'false')
shared.config.set(address, 'noncetrialsperbyte', str(
nonceTrialsPerByte))
shared.config.set(address, 'payloadlengthextrabytes', str(
payloadLengthExtraBytes))
shared.config.set(
address, 'privSigningKey', privSigningKeyWIF)
shared.config.set(
address, 'privEncryptionKey', privEncryptionKeyWIF)
shared.writeKeysFile()
# The API and the join and create Chan functionality
# both need information back from the address generator.
shared.apiAddressGeneratorReturnQueue.put(address)
shared.UISignalQueue.put(('updateStatusBar',
tr._translate("MainWindow",
"Done generating address. Doing work necessary to broadcast it...")))
shared.UISignalQueue.put(('writeNewAddressToTable',
(label, address, streamNumber)))
shared.reloadMyAddressHashes()
if addressVersionNumber == 3:
shared.workerQueue.put((
'sendOutOrStoreMyV3Pubkey', ripe.digest()))
elif addressVersionNumber == 4:
shared.workerQueue.put((
'sendOutOrStoreMyV4Pubkey', address))
elif command == 'createDeterministicAddresses' or command == 'getDeterministicAddress' or command == 'createChan' or command == 'joinChan':
if len(deterministicPassphrase) == 0:
sys.stderr.write('[WARN]: You are creating deterministic address(es) ' +
'using a blank passphrase. Bitmessage will do it ' +
'but it is rather stupid.')
if command == 'createDeterministicAddresses':
shared.UISignalQueue.put(('updateStatusBar',
tr._translate("MainWindow",
"Generating %1 new addresses.").arg(str(numberOfAddressesToMake))))
signingKeyNonce = 0
encryptionKeyNonce = 1
# We fill out this list no matter what although we only need it if we end up passing the info to the API.
listOfNewAddressesToSendOutThroughTheAPI = []
for i in range(numberOfAddressesToMake):
# This next section is a little bit strange. We're going to generate keys over and over until we
# find one that has a RIPEMD hash that starts with either \x00 or \x00\x00. Then when we pack them
# into a Bitmessage address, we won't store the \x00 or
# \x00\x00 bytes thus making the address shorter.
startTime = time.time()
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix = 0
while True:
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix += 1
potentialPrivSigningKey = hashlib.sha512(
deterministicPassphrase + encodeVarint(signingKeyNonce)).digest()[:32]
potentialPrivEncryptionKey = hashlib.sha512(
deterministicPassphrase + encodeVarint(encryptionKeyNonce)).digest()[:32]
potentialPubSigningKey = highlevelcrypto.pointMult(
potentialPrivSigningKey)
potentialPubEncryptionKey = highlevelcrypto.pointMult(
potentialPrivEncryptionKey)
signingKeyNonce += 2
encryptionKeyNonce += 2
ripe = hashlib.new('ripemd160')
sha = hashlib.new('sha512')
sha.update(
potentialPubSigningKey + potentialPubEncryptionKey)
ripe.update(sha.digest())
if ripe.digest()[:numberOfNullBytesDemandedOnFrontOfRipeHash] == '\x00' * numberOfNullBytesDemandedOnFrontOfRipeHash:
break
logger.info('Generated address with ripe digest: %s' % hexlify(ripe.digest()))
try:
logger.info('Address generator calculated %s addresses at %s addresses per second before finding one with the correct ripe-prefix.' % (numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix, numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix / (time.time() - startTime)))
except ZeroDivisionError:
# The user must have a pretty fast computer. time.time() - startTime equaled zero.
pass
address = encodeAddress(addressVersionNumber, streamNumber, ripe.digest())
saveAddressToDisk = True
# If we are joining an existing chan, let us check to make sure it matches the provided Bitmessage address
if command == 'joinChan':
if address != chanAddress:
shared.apiAddressGeneratorReturnQueue.put('chan name does not match address')
saveAddressToDisk = False
if command == 'getDeterministicAddress':
saveAddressToDisk = False
if saveAddressToDisk:
# An excellent way for us to store our keys is in Wallet Import Format. Let us convert now.
# https://en.bitcoin.it/wiki/Wallet_import_format
privSigningKey = '\x80' + potentialPrivSigningKey
checksum = hashlib.sha256(hashlib.sha256(
privSigningKey).digest()).digest()[0:4]
privSigningKeyWIF = arithmetic.changebase(
privSigningKey + checksum, 256, 58)
privEncryptionKey = '\x80' + \
potentialPrivEncryptionKey
checksum = hashlib.sha256(hashlib.sha256(
privEncryptionKey).digest()).digest()[0:4]
privEncryptionKeyWIF = arithmetic.changebase(
privEncryptionKey + checksum, 256, 58)
try:
shared.config.add_section(address)
addressAlreadyExists = False
except:
addressAlreadyExists = True
if addressAlreadyExists:
logger.info('%s already exists. Not adding it again.' % address)
shared.UISignalQueue.put(('updateStatusBar',
tr._translate("MainWindow",
"%1 is already in 'Your Identities'. Not adding it again.").arg(address)))
else:
logger.debug('label: %s' % label)
shared.config.set(address, 'label', label)
shared.config.set(address, 'enabled', 'true')
shared.config.set(address, 'decoy', 'false')
if command == 'joinChan' or command == 'createChan':
shared.config.set(address, 'chan', 'true')
shared.config.set(address, 'noncetrialsperbyte', str(nonceTrialsPerByte))
shared.config.set(address, 'payloadlengthextrabytes', str(payloadLengthExtraBytes))
shared.config.set(address, 'privSigningKey', privSigningKeyWIF)
shared.config.set(address, 'privEncryptionKey', privEncryptionKeyWIF)
shared.writeKeysFile()
shared.UISignalQueue.put(('writeNewAddressToTable',
(label, address, str(streamNumber))))
listOfNewAddressesToSendOutThroughTheAPI.append(address)
shared.myECCryptorObjects[ripe.digest()] = highlevelcrypto.makeCryptor(
hexlify(potentialPrivEncryptionKey))
shared.myAddressesByHash[ripe.digest()] = address
tag = hashlib.sha512(hashlib.sha512(encodeVarint(
addressVersionNumber) + encodeVarint(streamNumber) + ripe.digest()).digest()).digest()[32:]
shared.myAddressesByTag[tag] = address
if addressVersionNumber == 3:
# If this is a chan address,
# the worker thread won't send out the pubkey over the network.
shared.workerQueue.put(('sendOutOrStoreMyV3Pubkey', ripe.digest()))
elif addressVersionNumber == 4:
shared.workerQueue.put(('sendOutOrStoreMyV4Pubkey', address))
shared.UISignalQueue.put(('updateStatusBar',
tr._translate("MainWindow",
"Done generating address")))
# Done generating addresses.
if command == 'createDeterministicAddresses' or command == 'joinChan' or command == 'createChan':
shared.apiAddressGeneratorReturnQueue.put(
listOfNewAddressesToSendOutThroughTheAPI)
elif command == 'getDeterministicAddress':
shared.apiAddressGeneratorReturnQueue.put(address)
else:
raise Exception("Error in the addressGenerator thread. " +
"Thread was given a command it could not understand: " +
command)
shared.addressGeneratorQueue.task_done()
def sendOutOrStoreMyV4Pubkey(self, myAddress):
if not shared.config.has_section(myAddress):
#The address has been deleted.
return
if shared.safeConfigGetBoolean(myAddress, 'chan'):
return
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(-300, 300))# 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
dataToEncrypt = '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
dataToEncrypt += pubSigningKey[1:]
dataToEncrypt += pubEncryptionKey[1:]
dataToEncrypt += encodeVarint(shared.config.getint(
myAddress, 'noncetrialsperbyte'))
dataToEncrypt += encodeVarint(shared.config.getint(
myAddress, 'payloadlengthextrabytes'))
# When we encrypt, we'll use a hash of the data
# contained in an address as a decryption key. This way in order to
# read the public keys in a pubkey message, a node must know the address
# first. We'll also tag, unencrypted, the pubkey with part of the hash
# so that nodes know which pubkey object to try to decrypt when they
# want to send a message.
doubleHashOfAddressData = hashlib.sha512(hashlib.sha512(encodeVarint(
addressVersionNumber) + encodeVarint(streamNumber) + hash).digest()).digest()
payload += doubleHashOfAddressData[32:] # the tag
signature = highlevelcrypto.sign(payload + dataToEncrypt, privSigningKeyHex)
dataToEncrypt += encodeVarint(len(signature))
dataToEncrypt += signature
privEncryptionKey = doubleHashOfAddressData[:32]
pubEncryptionKey = highlevelcrypto.pointMult(privEncryptionKey)
payload += highlevelcrypto.encrypt(
dataToEncrypt, pubEncryptionKey.encode('hex'))
# Do the POW for this pubkey message
target = 2 ** 64 / (shared.networkDefaultProofOfWorkNonceTrialsPerByte*(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes + ((TTL*(len(payload)+8+shared.networkDefaultPayloadLengthExtraBytes))/(2 ** 16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime, doubleHashOfAddressData[32:])
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues((
streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
shared.writeKeysFile()
except Exception as err:
pass
def sendOutOrStoreMyV4Pubkey(self, myAddress):
if not shared.config.has_section(myAddress):
#The address has been deleted.
return
if shared.safeConfigGetBoolean(myAddress, 'chan'):
return
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(
-300, 300)) # 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
dataToEncrypt = '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(myAddress,
'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
dataToEncrypt += pubSigningKey[1:]
dataToEncrypt += pubEncryptionKey[1:]
dataToEncrypt += encodeVarint(
shared.config.getint(myAddress, 'noncetrialsperbyte'))
dataToEncrypt += encodeVarint(
shared.config.getint(myAddress, 'payloadlengthextrabytes'))
# When we encrypt, we'll use a hash of the data
# contained in an address as a decryption key. This way in order to
# read the public keys in a pubkey message, a node must know the address
# first. We'll also tag, unencrypted, the pubkey with part of the hash
# so that nodes know which pubkey object to try to decrypt when they
# want to send a message.
doubleHashOfAddressData = hashlib.sha512(
hashlib.sha512(
encodeVarint(addressVersionNumber) +
encodeVarint(streamNumber) + hash).digest()).digest()
payload += doubleHashOfAddressData[32:] # the tag
signature = highlevelcrypto.sign(payload + dataToEncrypt,
privSigningKeyHex)
dataToEncrypt += encodeVarint(len(signature))
dataToEncrypt += signature
privEncryptionKey = doubleHashOfAddressData[:32]
pubEncryptionKey = highlevelcrypto.pointMult(privEncryptionKey)
payload += highlevelcrypto.encrypt(dataToEncrypt,
pubEncryptionKey.encode('hex'))
# Do the POW for this pubkey message
target = 2**64 / (
shared.networkDefaultProofOfWorkNonceTrialsPerByte *
(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes +
((TTL * (len(payload) + 8 +
shared.networkDefaultPayloadLengthExtraBytes)) /
(2**16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (objectType, streamNumber, payload,
embeddedTime,
doubleHashOfAddressData[32:])
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues(
(streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(myAddress, 'lastpubkeysendtime',
str(int(time.time())))
shared.writeKeysFile()
except Exception as err:
pass
def run(self):
while True:
queueValue = shared.addressGeneratorQueue.get()
nonceTrialsPerByte = 0
payloadLengthExtraBytes = 0
if queueValue[0] == 'createChan':
command, addressVersionNumber, streamNumber, label, deterministicPassphrase = queueValue
eighteenByteRipe = False
numberOfAddressesToMake = 1
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif queueValue[0] == 'joinChan':
command, chanAddress, label, deterministicPassphrase = queueValue
eighteenByteRipe = False
addressVersionNumber = decodeAddress(chanAddress)[1]
streamNumber = decodeAddress(chanAddress)[2]
numberOfAddressesToMake = 1
numberOfNullBytesDemandedOnFrontOfRipeHash = 1
elif len(queueValue) == 7:
command, addressVersionNumber, streamNumber, label, numberOfAddressesToMake, deterministicPassphrase, eighteenByteRipe = queueValue
try:
numberOfNullBytesDemandedOnFrontOfRipeHash = shared.config.getint(
'bitmessagesettings', 'numberofnullbytesonaddress')
except:
if eighteenByteRipe:
numberOfNullBytesDemandedOnFrontOfRipeHash = 2
else:
numberOfNullBytesDemandedOnFrontOfRipeHash = 1 # the default
elif len(queueValue) == 9:
command, addressVersionNumber, streamNumber, label, numberOfAddressesToMake, deterministicPassphrase, eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes = queueValue
try:
numberOfNullBytesDemandedOnFrontOfRipeHash = shared.config.getint(
'bitmessagesettings', 'numberofnullbytesonaddress')
except:
if eighteenByteRipe:
numberOfNullBytesDemandedOnFrontOfRipeHash = 2
else:
numberOfNullBytesDemandedOnFrontOfRipeHash = 1 # the default
else:
sys.stderr.write(
'Programming error: A structure with the wrong number of values was passed into the addressGeneratorQueue. Here is the queueValue: %s\n'
% repr(queueValue))
if addressVersionNumber < 3 or addressVersionNumber > 4:
sys.stderr.write(
'Program error: For some reason the address generator queue has been given a request to create at least one version %s address which it cannot do.\n'
% addressVersionNumber)
if nonceTrialsPerByte == 0:
nonceTrialsPerByte = shared.config.getint(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
if nonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte:
nonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if payloadLengthExtraBytes == 0:
payloadLengthExtraBytes = shared.config.getint(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
if payloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
payloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
if command == 'createRandomAddress':
shared.UISignalQueue.put(
('updateStatusBar',
tr.translateText("MainWindow",
"Generating one new address")))
# This next section is a little bit strange. We're going to generate keys over and over until we
# find one that starts with either \x00 or \x00\x00. Then when we pack them into a Bitmessage address,
# we won't store the \x00 or \x00\x00 bytes thus making the
# address shorter.
startTime = time.time()
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix = 0
potentialPrivSigningKey = OpenSSL.rand(32)
potentialPubSigningKey = highlevelcrypto.pointMult(
potentialPrivSigningKey)
while True:
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix += 1
potentialPrivEncryptionKey = OpenSSL.rand(32)
potentialPubEncryptionKey = highlevelcrypto.pointMult(
potentialPrivEncryptionKey)
# print 'potentialPubSigningKey', potentialPubSigningKey.encode('hex')
# print 'potentialPubEncryptionKey',
# potentialPubEncryptionKey.encode('hex')
ripe = hashlib.new('ripemd160')
sha = hashlib.new('sha512')
sha.update(potentialPubSigningKey +
potentialPubEncryptionKey)
ripe.update(sha.digest())
# print 'potential ripe.digest',
# ripe.digest().encode('hex')
if ripe.digest(
)[:
numberOfNullBytesDemandedOnFrontOfRipeHash] == '\x00' * numberOfNullBytesDemandedOnFrontOfRipeHash:
break
print 'Generated address with ripe digest:', ripe.digest(
).encode('hex')
print 'Address generator calculated', numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix, 'addresses at', numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix / (
time.time() - startTime
), 'addresses per second before finding one with the correct ripe-prefix.'
address = encodeAddress(addressVersionNumber, streamNumber,
ripe.digest())
# An excellent way for us to store our keys is in Wallet Import Format. Let us convert now.
# https://en.bitcoin.it/wiki/Wallet_import_format
privSigningKey = '\x80' + potentialPrivSigningKey
checksum = hashlib.sha256(
hashlib.sha256(privSigningKey).digest()).digest()[0:4]
privSigningKeyWIF = arithmetic.changebase(
privSigningKey + checksum, 256, 58)
# print 'privSigningKeyWIF',privSigningKeyWIF
privEncryptionKey = '\x80' + potentialPrivEncryptionKey
checksum = hashlib.sha256(
hashlib.sha256(privEncryptionKey).digest()).digest()[0:4]
privEncryptionKeyWIF = arithmetic.changebase(
privEncryptionKey + checksum, 256, 58)
# print 'privEncryptionKeyWIF',privEncryptionKeyWIF
shared.config.add_section(address)
shared.config.set(address, 'label', label)
shared.config.set(address, 'enabled', 'true')
shared.config.set(address, 'decoy', 'false')
shared.config.set(address, 'noncetrialsperbyte',
str(nonceTrialsPerByte))
shared.config.set(address, 'payloadlengthextrabytes',
str(payloadLengthExtraBytes))
shared.config.set(address, 'privSigningKey', privSigningKeyWIF)
shared.config.set(address, 'privEncryptionKey',
privEncryptionKeyWIF)
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
# The API and the join and create Chan functionality
# both need information back from the address generator.
shared.apiAddressGeneratorReturnQueue.put(address)
shared.UISignalQueue.put((
'updateStatusBar',
tr.translateText(
"MainWindow",
"Done generating address. Doing work necessary to broadcast it..."
)))
shared.UISignalQueue.put(
('writeNewAddressToTable', (label, address, streamNumber)))
shared.reloadMyAddressHashes()
if addressVersionNumber == 3:
shared.workerQueue.put(
('sendOutOrStoreMyV3Pubkey', ripe.digest()))
elif addressVersionNumber == 4:
shared.workerQueue.put(
('sendOutOrStoreMyV4Pubkey', address))
elif command == 'createDeterministicAddresses' or command == 'getDeterministicAddress' or command == 'createChan' or command == 'joinChan':
if len(deterministicPassphrase) == 0:
sys.stderr.write(
'WARNING: You are creating deterministic address(es) using a blank passphrase. Bitmessage will do it but it is rather stupid.'
)
if command == 'createDeterministicAddresses':
statusbar = 'Generating ' + str(
numberOfAddressesToMake) + ' new addresses.'
shared.UISignalQueue.put(('updateStatusBar', statusbar))
signingKeyNonce = 0
encryptionKeyNonce = 1
listOfNewAddressesToSendOutThroughTheAPI = [
] # We fill out this list no matter what although we only need it if we end up passing the info to the API.
for i in range(numberOfAddressesToMake):
# This next section is a little bit strange. We're going to generate keys over and over until we
# find one that has a RIPEMD hash that starts with either \x00 or \x00\x00. Then when we pack them
# into a Bitmessage address, we won't store the \x00 or
# \x00\x00 bytes thus making the address shorter.
startTime = time.time()
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix = 0
while True:
numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix += 1
potentialPrivSigningKey = hashlib.sha512(
deterministicPassphrase +
encodeVarint(signingKeyNonce)).digest()[:32]
potentialPrivEncryptionKey = hashlib.sha512(
deterministicPassphrase +
encodeVarint(encryptionKeyNonce)).digest()[:32]
potentialPubSigningKey = highlevelcrypto.pointMult(
potentialPrivSigningKey)
potentialPubEncryptionKey = highlevelcrypto.pointMult(
potentialPrivEncryptionKey)
# print 'potentialPubSigningKey', potentialPubSigningKey.encode('hex')
# print 'potentialPubEncryptionKey',
# potentialPubEncryptionKey.encode('hex')
signingKeyNonce += 2
encryptionKeyNonce += 2
ripe = hashlib.new('ripemd160')
sha = hashlib.new('sha512')
sha.update(potentialPubSigningKey +
potentialPubEncryptionKey)
ripe.update(sha.digest())
# print 'potential ripe.digest',
# ripe.digest().encode('hex')
if ripe.digest(
)[:
numberOfNullBytesDemandedOnFrontOfRipeHash] == '\x00' * numberOfNullBytesDemandedOnFrontOfRipeHash:
break
print 'ripe.digest', ripe.digest().encode('hex')
print 'Address generator calculated', numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix, 'addresses at', numberOfAddressesWeHadToMakeBeforeWeFoundOneWithTheCorrectRipePrefix / (
time.time() - startTime), 'keys per second.'
address = encodeAddress(addressVersionNumber, streamNumber,
ripe.digest())
saveAddressToDisk = True
# If we are joining an existing chan, let us check to make sure it matches the provided Bitmessage address
if command == 'joinChan':
if address != chanAddress:
shared.apiAddressGeneratorReturnQueue.put(
'chan name does not match address')
saveAddressToDisk = False
if command == 'getDeterministicAddress':
saveAddressToDisk = False
if saveAddressToDisk:
# An excellent way for us to store our keys is in Wallet Import Format. Let us convert now.
# https://en.bitcoin.it/wiki/Wallet_import_format
privSigningKey = '\x80' + potentialPrivSigningKey
checksum = hashlib.sha256(
hashlib.sha256(
privSigningKey).digest()).digest()[0:4]
privSigningKeyWIF = arithmetic.changebase(
privSigningKey + checksum, 256, 58)
privEncryptionKey = '\x80' + \
potentialPrivEncryptionKey
checksum = hashlib.sha256(
hashlib.sha256(
privEncryptionKey).digest()).digest()[0:4]
privEncryptionKeyWIF = arithmetic.changebase(
privEncryptionKey + checksum, 256, 58)
addressAlreadyExists = False
try:
shared.config.add_section(address)
except:
print address, 'already exists. Not adding it again.'
addressAlreadyExists = True
if not addressAlreadyExists:
print 'label:', label
shared.config.set(address, 'label', label)
shared.config.set(address, 'enabled', 'true')
shared.config.set(address, 'decoy', 'false')
if command == 'joinChan' or command == 'createChan':
shared.config.set(address, 'chan', 'true')
shared.config.set(address, 'noncetrialsperbyte',
str(nonceTrialsPerByte))
shared.config.set(address,
'payloadlengthextrabytes',
str(payloadLengthExtraBytes))
shared.config.set(address, 'privSigningKey',
privSigningKeyWIF)
shared.config.set(address, 'privEncryptionKey',
privEncryptionKeyWIF)
with open(shared.appdata + 'keys.dat',
'wb') as configfile:
shared.config.write(configfile)
shared.UISignalQueue.put(
('writeNewAddressToTable',
(label, address, str(streamNumber))))
listOfNewAddressesToSendOutThroughTheAPI.append(
address)
shared.myECCryptorObjects[
ripe.digest()] = highlevelcrypto.makeCryptor(
potentialPrivEncryptionKey.encode('hex'))
shared.myAddressesByHash[ripe.digest()] = address
tag = hashlib.sha512(
hashlib.sha512(
encodeVarint(addressVersionNumber) +
encodeVarint(streamNumber) +
ripe.digest()).digest()).digest()[32:]
shared.myAddressesByTag[tag] = address
if addressVersionNumber == 3:
shared.workerQueue.put(
('sendOutOrStoreMyV3Pubkey', ripe.digest()
)) # If this is a chan address,
# the worker thread won't send out the pubkey over the network.
elif addressVersionNumber == 4:
shared.workerQueue.put(
('sendOutOrStoreMyV4Pubkey', address))
# Done generating addresses.
if command == 'createDeterministicAddresses' or command == 'joinChan' or command == 'createChan':
shared.apiAddressGeneratorReturnQueue.put(
listOfNewAddressesToSendOutThroughTheAPI)
shared.UISignalQueue.put(
('updateStatusBar',
tr.translateText("MainWindow",
"Done generating address")))
# shared.reloadMyAddressHashes()
elif command == 'getDeterministicAddress':
shared.apiAddressGeneratorReturnQueue.put(address)
#todo: return things to the API if createChan or joinChan assuming saveAddressToDisk
else:
raise Exception(
"Error in the addressGenerator thread. Thread was given a command it could not understand: "
+ command)
