class EventPlayer(object):
def __init__(self, playback_speed=None, comment_display=None):
self._playback_speed = playback_speed
self._timer = Timer()
self._timer.unpause()
if comment_display is None:
self._comment_display = self._default_comment_display
else:
self._comment_display = comment_display
def play_script(self, path, finish_callback=None):
"""
Start execution of the given script in a separate thread and return immediately.
Note: You should handle any exceptions from the playback script via sys.execpthook.
"""
_globals = {}
_locals = {}
"""
Calls to events in the playback script like: player.post_event(obj,PyQt4.QtGui.QMouseEvent(...),t)
are/were responsible for the xcb-error on Ubuntu, because you may not use
a Gui-object from a thread other than the MainThread running the Gui
"""
execfile(path, _globals, _locals)
def run():
_locals['playback_events'](player=self)
if finish_callback is not None:
finish_callback()
th = threading.Thread(target=run)
th.daemon = True
th.start()
def post_event(self, obj, event, timestamp_in_seconds):
if self._playback_speed is not None:
self._timer.sleep_until(timestamp_in_seconds /
self._playback_speed)
assert threading.current_thread().name != "MainThread"
event.spont = True
QApplication.postEvent(obj, event)
assert QApplication.instance().thread() == obj.thread()
flusher = EventFlusher()
flusher.moveToThread(obj.thread())
flusher.setParent(QApplication.instance())
signaler = Signaler()
signaler.sig.connect(flusher.set, Qt.QueuedConnection)
signaler.sig.emit()
flusher.wait()
flusher.clear()
def display_comment(self, comment):
self._comment_display(comment)
def _default_comment_display(self, comment):
print "--------------------------------------------------"
print comment
print "--------------------------------------------------"
class EventPlayer(object):
def __init__(self, playback_speed=None, comment_display=None):
self._playback_speed = playback_speed
self._timer = Timer()
self._timer.unpause()
if comment_display is None:
self._comment_display = self._default_comment_display
else:
self._comment_display = comment_display
def play_script(self, path, finish_callback=None):
"""
Start execution of the given script in a separate thread and return immediately.
Note: You should handle any exceptions from the playback script via sys.execpthook.
"""
_globals = {}
_locals = {}
"""
Calls to events in the playback script like: player.post_event(obj,PyQt4.QtGui.QMouseEvent(...),t)
are/were responsible for the xcb-error on Ubuntu, because you may not use
a Gui-object from a thread other than the MainThread running the Gui
"""
execfile(path, _globals, _locals)
def run():
_locals['playback_events'](player=self)
if finish_callback is not None:
finish_callback()
th = threading.Thread( target=run )
th.daemon = True
th.start()
def post_event(self, obj, event, timestamp_in_seconds):
if self._playback_speed is not None:
self._timer.sleep_until(timestamp_in_seconds / self._playback_speed)
assert threading.current_thread().name != "MainThread"
event.spont = True
QApplication.postEvent(obj, event)
assert QApplication.instance().thread() == obj.thread()
flusher = EventFlusher()
flusher.moveToThread( obj.thread() )
flusher.setParent( QApplication.instance() )
signaler = Signaler()
signaler.sig.connect( flusher.set, Qt.QueuedConnection )
signaler.sig.emit()
flusher.wait()
flusher.clear()
def display_comment(self, comment):
self._comment_display(comment)
def _default_comment_display(self, comment):
print "--------------------------------------------------"
print comment
print "--------------------------------------------------"
class EventRecorder( QObject ):
"""
Records spontaneous events from the UI and serializes them as strings that can be evaluated in Python.
"""
def __init__(self, parent=None, ignore_parent_events=True):
QObject.__init__(self, parent=parent)
self._ignore_parent_events = False
if parent is not None and ignore_parent_events:
self._ignore_parent_events = True
self._parent_name = get_fully_qualified_name(parent)
self._captured_events = []
self._timer = Timer()
@property
def paused(self):
return self._timer.paused
QEvent_Style = 91
IgnoredEventTypes = set( [ QEvent.Paint,
QEvent.KeyboardLayoutChange,
QEvent.WindowActivate,
QEvent.WindowDeactivate,
QEvent.ActivationChange,
# These event symbols are not exposed in pyqt, so we pull them from our own enum
EventTypes.Style,
EventTypes.ApplicationActivate,
EventTypes.ApplicationDeactivate,
EventTypes.NonClientAreaMouseMove,
EventTypes.NonClientAreaMouseButtonPress,
EventTypes.NonClientAreaMouseButtonRelease,
EventTypes.NonClientAreaMouseButtonDblClick
] )
IgnoredEventClasses = (QChildEvent, QTimerEvent, QGraphicsSceneMouseEvent, QWindowStateChangeEvent, QMoveEvent)
def captureEvent(self, watched, event):
if self._shouldSaveEvent(event):
try:
eventstr = event_to_string(event)
except KeyError:
logger.warn("Don't know how to record event: {}".format( str(event) ))
print "Don't know", str(event)
else:
timestamp_in_seconds = self._timer.seconds()
objname = str(get_fully_qualified_name(watched))
if not ( self._ignore_parent_events and objname.startswith(self._parent_name) ):
self._captured_events.append( (eventstr, objname, timestamp_in_seconds) )
return False
def insertComment(self, comment):
self._captured_events.append( (comment, "comment", None) )
def _shouldSaveEvent(self, event):
if isinstance(event, QMouseEvent):
# Ignore most mouse movement events if the user isn't pressing anything.
if event.type() == QEvent.MouseMove \
and int(event.button()) == 0 \
and int(event.buttons()) == 0 \
and int(event.modifiers()) == 0:
# Somewhat hackish (and slow), but we have to record mouse movements during combo box usage.
# Same for QMenu usage (on Mac, it doesn't seem to matter, but on Fedora it does matter.)
widgetUnderCursor = QApplication.instance().widgetAt( QCursor.pos() )
if widgetUnderCursor is not None and widgetUnderCursor.objectName() == "qt_scrollarea_viewport":
return has_ancestor(widgetUnderCursor, QComboBox)
if isinstance(widgetUnderCursor, QMenu):
return True
return False
else:
return True
# Ignore non-spontaneous events
if not event.spontaneous():
return False
if event.type() in self.IgnoredEventTypes:
return False
if isinstance(event, self.IgnoredEventClasses):
return False
return True
def unpause(self):
# Here, we use a special override of QApplication.notify() instead of using QApplication.instance().installEventFilter().
# That's because (contrary to the documentation), the QApplication eventFilter does NOT get to see every event in the application.
# Testing shows that events that were "filtered out" by a different event filter may not be seen by the QApplication event filter.
self._timer.unpause()
def _notify(receiver, event):
self.captureEvent(receiver, event)
return _orig_QApp_notify(receiver, event)
from ilastik.shell.gui.startShellGui import EventRecordingApp
assert isinstance( QApplication.instance(), EventRecordingApp )
QApplication.instance()._notify =_notify
def pause(self):
self._timer.pause()
QApplication.instance()._notify = _orig_QApp_notify
def writeScript(self, fileobj):
# Write header comments
fileobj.write(
"""
# Event Recording
# Started at: {}
""".format( str(self._timer.start_time) ) )
# Write playback function definition
fileobj.write(
"""
def playback_events(player):
import PyQt4.QtCore
from PyQt4.QtCore import Qt, QEvent, QPoint
import PyQt4.QtGui
from ilastik.utility.gui.eventRecorder.objectNameUtils import get_named_object
from ilastik.utility.gui.eventRecorder.eventRecorder import EventPlayer
from ilastik.shell.gui.startShellGui import shell
player.display_comment("SCRIPT STARTING")
""")
# Write all events and comments
for eventstr, objname, timestamp_in_seconds in self._captured_events:
if objname == "comment":
eventstr = eventstr.replace('\\', '\\\\')
eventstr = eventstr.replace('"', '\\"')
eventstr = eventstr.replace("'", "\\'")
fileobj.write(
"""
########################
player.display_comment(\"""{eventstr}\""")
########################
""".format( **locals() ) )
else:
fileobj.write(
"""
obj = get_named_object( '{objname}' )
player.post_event( obj, {eventstr}, {timestamp_in_seconds} )
""".format( **locals() )
)
fileobj.write(
"""
player.display_comment("SCRIPT COMPLETE")
""")
class EventRecorder(QObject):
"""
Records spontaneous events from the UI and serializes them as strings that can be evaluated in Python.
"""
def __init__(self, parent=None, ignore_parent_events=True):
QObject.__init__(self, parent=parent)
self._ignore_parent_events = False
if parent is not None and ignore_parent_events:
self._ignore_parent_events = True
self._parent_name = get_fully_qualified_name(parent)
self._captured_events = []
self._timer = Timer()
@property
def paused(self):
return self._timer.paused
QEvent_Style = 91
IgnoredEventTypes = set([
QEvent.Paint,
QEvent.KeyboardLayoutChange,
QEvent.WindowActivate,
QEvent.WindowDeactivate,
QEvent.ActivationChange,
# These event symbols are not exposed in pyqt, so we pull them from our own enum
EventTypes.Style,
EventTypes.ApplicationActivate,
EventTypes.ApplicationDeactivate,
EventTypes.NonClientAreaMouseMove,
EventTypes.NonClientAreaMouseButtonPress,
EventTypes.NonClientAreaMouseButtonRelease,
EventTypes.NonClientAreaMouseButtonDblClick
])
IgnoredEventClasses = (QChildEvent, QTimerEvent, QGraphicsSceneMouseEvent,
QWindowStateChangeEvent, QMoveEvent)
def captureEvent(self, watched, event):
if self._shouldSaveEvent(event):
try:
eventstr = event_to_string(event)
except KeyError:
logger.warn("Don't know how to record event: {}".format(
str(event)))
print "Don't know", str(event)
else:
timestamp_in_seconds = self._timer.seconds()
objname = str(get_fully_qualified_name(watched))
if not (self._ignore_parent_events
and objname.startswith(self._parent_name)):
self._captured_events.append(
(eventstr, objname, timestamp_in_seconds))
return False
def insertComment(self, comment):
self._captured_events.append((comment, "comment", None))
def _shouldSaveEvent(self, event):
if isinstance(event, QMouseEvent):
# Ignore most mouse movement events if the user isn't pressing anything.
if event.type() == QEvent.MouseMove \
and int(event.button()) == 0 \
and int(event.buttons()) == 0 \
and int(event.modifiers()) == 0:
# Somewhat hackish (and slow), but we have to record mouse movements during combo box usage.
# Same for QMenu usage (on Mac, it doesn't seem to matter, but on Fedora it does matter.)
widgetUnderCursor = QApplication.instance().widgetAt(
QCursor.pos())
if widgetUnderCursor is not None and widgetUnderCursor.objectName(
) == "qt_scrollarea_viewport":
return has_ancestor(widgetUnderCursor, QComboBox)
if isinstance(widgetUnderCursor, QMenu):
return True
return False
else:
return True
# Ignore non-spontaneous events
if not event.spontaneous():
return False
if event.type() in self.IgnoredEventTypes:
return False
if isinstance(event, self.IgnoredEventClasses):
return False
return True
def unpause(self):
# Here, we use a special override of QApplication.notify() instead of using QApplication.instance().installEventFilter().
# That's because (contrary to the documentation), the QApplication eventFilter does NOT get to see every event in the application.
# Testing shows that events that were "filtered out" by a different event filter may not be seen by the QApplication event filter.
self._timer.unpause()
def _notify(receiver, event):
self.captureEvent(receiver, event)
return _orig_QApp_notify(receiver, event)
from ilastik.shell.gui.startShellGui import EventRecordingApp
assert isinstance(QApplication.instance(), EventRecordingApp)
QApplication.instance()._notify = _notify
def pause(self):
self._timer.pause()
QApplication.instance()._notify = _orig_QApp_notify
def writeScript(self, fileobj):
# Write header comments
fileobj.write("""
# Event Recording
# Started at: {}
""".format(str(self._timer.start_time)))
# Write playback function definition
fileobj.write("""
def playback_events(player):
import PyQt4.QtCore
from PyQt4.QtCore import Qt, QEvent, QPoint
import PyQt4.QtGui
from ilastik.utility.gui.eventRecorder.objectNameUtils import get_named_object
from ilastik.utility.gui.eventRecorder.eventRecorder import EventPlayer
from ilastik.shell.gui.startShellGui import shell
player.display_comment("SCRIPT STARTING")
""")
# Write all events and comments
for eventstr, objname, timestamp_in_seconds in self._captured_events:
if objname == "comment":
eventstr = eventstr.replace('\\', '\\\\')
eventstr = eventstr.replace('"', '\\"')
eventstr = eventstr.replace("'", "\\'")
fileobj.write("""
########################
player.display_comment(\"""{eventstr}\""")
########################
""".format(**locals()))
else:
fileobj.write("""
obj = get_named_object( '{objname}' )
player.post_event( obj, {eventstr}, {timestamp_in_seconds} )
""".format(**locals()))
fileobj.write("""
player.display_comment("SCRIPT COMPLETE")
""")