def test_agilent34410a_r():
with expected_protocol(ik.agilent.Agilent34410a,
["CONF?", "FORM:DATA REAL,64", "R? 1"], [
"VOLT +1.000000E+01,+3.000000E-06",
"#18" + "3FF0000000000000".decode("hex")
]) as dmm:
unit_eq(dmm.r(1), np.array([1]) * pq.volt)
def test_scpi_multimeter_measure():
with expected_protocol(ik.generic_scpi.SCPIMultimeter, [
"MEAS:VOLT:DC?",
], [
"+4.23450000E-03",
]) as dmm:
unit_eq(dmm.measure(dmm.Mode.voltage_dc), 4.2345e-03 * pq.volt)
def test_agilent34410a_read_last_data():
with expected_protocol(ik.agilent.Agilent34410a, [
"DATA:LAST?",
], [
"+1.73730000E-03 VDC",
]) as dmm:
unit_eq(dmm.read_last_data(), 1.73730000E-03 * u.volt)
def test_cc1_dwell_new_firmware():
with expected_protocol(ik.qubitekk.CC1,
[":ACKN OF", "FIRM?", "DWEL?", ":DWEL 2"],
["", "Firmware v2.010", "8"],
sep="\n") as cc:
unit_eq(cc.dwell_time, pq.Quantity(8, "s"))
cc.dwell_time = 2
def test_hp6632b_output_protection_delay():
with expected_protocol(
ik.hp.HP6632b,
["OUTP:PROT:DEL?", "OUTP:PROT:DEL {:e}".format(5e-02)],
["8e-02"]) as psu:
unit_eq(psu.output_protection_delay, 8e-02 * u.second)
psu.output_protection_delay = 5e-02 * u.second
def test_hp6632b_current_sense_range():
with expected_protocol(
ik.hp.HP6632b,
["SENS:CURR:RANGE?", "SENS:CURR:RANGE {:e}".format(1)],
["0.05"]) as psu:
unit_eq(psu.current_sense_range, 0.05 * u.amp)
psu.current_sense_range = 1 * u.amp
def test_cc1_dwell_old_firmware():
with expected_protocol(ik.qubitekk.CC1,
[":ACKN OF", "FIRM?", "DWEL?", ":DWEL 2"],
["Unknown Command", "Firmware v2.001", "8000", ""],
sep="\n") as cc:
unit_eq(cc.dwell_time, pq.Quantity(8, "s"))
cc.dwell_time = 2
def test_cc1_delay():
with expected_protocol(ik.qubitekk.CC1,
[":ACKN OF", "FIRM?", "DELA?", ":DELA 2"],
["", "Firmware v2.010", "8", ""],
sep="\n") as cc:
unit_eq(cc.delay, pq.Quantity(8, "ns"))
cc.delay = 2
def test_hp6632b_sense_sweep_interval():
with expected_protocol(
ik.hp.HP6632b,
["SENS:SWE:TINT?", "SENS:SWE:TINT {:e}".format(1e-05)],
["1.56e-05"]) as psu:
unit_eq(psu.sense_sweep_interval, 1.56e-05 * u.second)
psu.sense_sweep_interval = 1e-05 * u.second
def test_gpibusbcomm_timeout():
comm = GPIBCommunicator(mock.MagicMock(), 1)
comm._version = 5
unit_eq(comm.timeout, 1000 * pq.millisecond)
comm.timeout = 5000 * pq.millisecond
comm._file.sendcmd.assert_called_with("++read_tmo_ms 5000.0")
def test_lcc25_minvoltage():
with expected_protocol(
ik.thorlabs.LCC25,
"min?\rmin=10.0\r",
"\r>20\r"
) as lcc:
unit_eq(lcc.min_voltage, pq.Quantity(20, "V"))
lcc.min_voltage = 10.0
def test_lcc25_voltage2():
with expected_protocol(
ik.thorlabs.LCC25,
"volt2?\rvolt2=10.0\r",
"\r20\r"
) as lcc:
unit_eq(lcc.voltage2, pq.Quantity(20, "V"))
lcc.voltage2 = 10.0
def test_lcc25_frequency():
with expected_protocol(
ik.thorlabs.LCC25,
"freq?\rfreq=10.0\r",
"\r>20\r"
) as lcc:
unit_eq(lcc.frequency, pq.Quantity(20, "Hz"))
lcc.frequency = 10.0
def test_sc10_shut_time():
with expected_protocol(
ik.thorlabs.SC10,
"shut?\rshut=10\r",
"\r20\r>\r"
) as sc:
unit_eq(sc.shut_time, pq.Quantity(20, "ms"))
sc.shut_time = 10.0
def test_sc10_open_time():
with expected_protocol(
ik.thorlabs.SC10,
"open?\ropen=10\r",
"\r20\r>\r"
) as sc:
unit_eq(sc.open_time, pq.Quantity(20, "ms"))
sc.open_time = 10.0
def test_lcc25_increment():
with expected_protocol(
ik.thorlabs.LCC25,
"increment?\rincrement=10.0\r",
"\r>20\r"
) as lcc:
unit_eq(lcc.increment, pq.Quantity(20, "V"))
lcc.increment = 10.0
def test_lcc25_dwell():
with expected_protocol(
ik.thorlabs.LCC25,
"dwell?\rdwell=10\r",
"\r>20\r"
) as lcc:
unit_eq(lcc.dwell, pq.Quantity(20, "ms"))
lcc.dwell = 10
def test_lcc25_voltage2():
with expected_protocol(ik.thorlabs.LCC25, [
"volt2?",
"volt2=10.0",
], ["volt2?", "20", ">volt2=10.0", ">"],
sep="\r") as lcc:
unit_eq(lcc.voltage2, u.Quantity(20, "V"))
lcc.voltage2 = 10.0
def test_agilent34410a_fetch():
with expected_protocol(
ik.agilent.Agilent34410a, ["CONF?", "FETC?"],
["VOLT +1.000000E+01,+3.000000E-06", "+4.27150000E-03,5.27150000E-03"
]) as dmm:
data = dmm.fetch()
unit_eq(data[0], 4.27150000E-03 * u.volt)
unit_eq(data[1], 5.27150000E-03 * u.volt)
def test_gpibusbcomm_timeout():
comm = GPIBCommunicator(mock.MagicMock(), 1)
comm._version = 5
unit_eq(comm.timeout, 1000 * pq.millisecond)
comm.timeout = 5000 * pq.millisecond
comm._file.sendcmd.assert_called_with("++read_tmo_ms 5000.0")
def test_srsdg645_burst_delay():
"""
SRSDG645: Checks getting/setting of enabling T0 output on first
in burst mode.
"""
with expected_protocol(ik.srs.SRSDG645, ["BURD?", "BURD 42"],
["0"]) as ddg:
unit_eq(ddg.burst_delay, u.Quantity(0, "s"))
ddg.burst_delay = u.Quantity(42, "s")
def test_srsdg645_burst_period():
"""
SRSDG645: Checks getting/setting of enabling T0 output on first
in burst mode.
"""
with expected_protocol(ik.srs.SRSDG645, ["BURP?", "BURP 13"],
["100E-9"]) as ddg:
unit_eq(ddg.burst_period, u.Quantity(100, "ns").rescale(u.s))
ddg.burst_period = u.Quantity(13, "s")
def test_scpi_multimeter_sample_timer():
with expected_protocol(ik.generic_scpi.SCPIMultimeter, [
"SAMP:TIM?",
"SAMP:TIM {:e}".format(1),
], [
"+1",
]) as dmm:
unit_eq(dmm.sample_timer, 1 * pq.second)
dmm.sample_timer = 1000 * pq.millisecond
def test_agilent34410a_read_data():
with expected_protocol(
ik.agilent.Agilent34410a,
["CONF?", "FORM:DATA ASC", "DATA:REM? 2"],
["VOLT +1.000000E+01,+3.000000E-06", "+4.27150000E-03,5.27150000E-03"
]) as dmm:
data = dmm.read_data(2)
unit_eq(data[0], 4.27150000E-03 * u.volt)
unit_eq(data[1], 5.27150000E-03 * u.volt)
def test_agilent34410a_read_data_nvmem():
with expected_protocol(ik.agilent.Agilent34410a, [
"CONF?",
"DATA:DATA? NVMEM",
], ["VOLT +1.000000E+01,+3.000000E-06", "+4.27150000E-03,5.27150000E-03"
]) as dmm:
data = dmm.read_data_nvmem()
unit_eq(data[0], 4.27150000E-03 * u.volt)
unit_eq(data[1], 5.27150000E-03 * u.volt)
def test_scpi_multimeter_trigger_delay():
with expected_protocol(ik.generic_scpi.SCPIMultimeter, [
"TRIG:DEL?",
"TRIG:DEL {:e}".format(1),
], [
"+1",
]) as dmm:
unit_eq(dmm.trigger_delay, 1 * pq.second)
dmm.trigger_delay = 1000 * pq.millisecond
def test_gpibusbcomm_init_correct_values_new_firmware():
mock_gpib = mock.MagicMock()
mock_gpib.query.return_value = "5"
comm = GPIBCommunicator(mock_gpib, 1)
eq_(comm._terminator, "\n")
eq_(comm._version, 5)
eq_(comm._eos, "\n")
eq_(comm._eoi, True)
unit_eq(comm._timeout, 1000 * pq.millisecond)
def test_hp6632b_voltage_sense():
with expected_protocol(
ik.hp.HP6632b,
[
"MEAS:VOLT?",
] , [
"10.0"
]
) as psu:
unit_eq(psu.voltage_sense, 10*pq.volt)
def test_gpibusbcomm_init_correct_values_new_firmware():
mock_gpib = mock.MagicMock()
mock_gpib.query.return_value = "5"
comm = GPIBCommunicator(mock_gpib, 1)
assert comm._terminator == "\n"
assert comm._version == 5
assert comm._eos == "\n"
assert comm._eoi is True
unit_eq(comm._timeout, 1000 * pq.millisecond)
def test_agilent34410a_read_last_data():
with expected_protocol(
ik.agilent.Agilent34410a,
[
"DATA:LAST?",
] , [
"+1.73730000E-03 VDC",
]
) as dmm:
unit_eq(dmm.read_last_data(), 1.73730000E-03 * pq.volt)
def test_gpibusbcomm_init_correct_values_new_firmware():
mock_gpib = mock.MagicMock()
mock_gpib.query.return_value = "5"
comm = GPIBCommunicator(mock_gpib, 1)
eq_(comm._terminator, "\n")
eq_(comm._version, 5)
eq_(comm._eos, "\n")
eq_(comm._eoi, True)
unit_eq(comm._timeout, 1000 * pq.millisecond)
def test_agilent34410a_r():
with expected_protocol(
ik.agilent.Agilent34410a,
["CONF?", "FORM:DATA REAL,64", "R? 1"],
[
"VOLT +1.000000E+01,+3.000000E-06",
# pylint: disable=no-member
b"#18" + bytes.fromhex("3FF0000000000000")
]) as dmm:
unit_eq(dmm.r(1), np.array([1]) * u.volt)
def test_cc1_window():
with expected_protocol(ik.qubitekk.CC1,
[":ACKN OF", "FIRM?", "WIND?", ":WIND 7"], [
"",
"Firmware v2.010",
"2",
],
sep="\n") as cc:
unit_eq(cc.window, pq.Quantity(2, "ns"))
cc.window = 7
def test_hp6632b_current_sense():
with expected_protocol(
ik.hp.HP6632b,
[
"MEAS:CURR?",
] , [
"10.0"
]
) as psu:
unit_eq(psu.current_sense, 10*pq.amp)
def test_srsdg645_output_offset():
"""
SRSDG645: Checks getting/setting unitful output offset.
"""
with expected_protocol(ik.srs.SRSDG645, [
"LOFF? 1",
"LOFF 1,2.0",
], ["1.2"]) as ddg:
unit_eq(ddg.output["AB"].level_offset, u.Quantity(1.2, "V"))
ddg.output["AB"].level_offset = 2.0
def test_srsdg645_output_level():
"""
SRSDG645: Checks getting/setting unitful output level.
"""
with expected_protocol(ik.srs.SRSDG645, [
"LAMP? 1",
"LAMP 1,4.0",
], ["3.2"]) as ddg:
unit_eq(ddg.output["AB"].level_amplitude, u.Quantity(3.2, "V"))
ddg.output["AB"].level_amplitude = 4.0
def test_scpi_multimeter_measure():
with expected_protocol(
ik.generic_scpi.SCPIMultimeter,
[
"MEAS:VOLT:DC?",
] , [
"+4.23450000E-03",
]
) as dmm:
unit_eq(dmm.measure(dmm.Mode.voltage_dc), 4.2345e-03 * pq.volt)
def test_scpi_multimeter_sample_timer():
with expected_protocol(
ik.generic_scpi.SCPIMultimeter,
[
"SAMP:TIM?",
"SAMP:TIM {:e}".format(1),
] , [
"+1",
]
) as dmm:
unit_eq(dmm.sample_timer, 1 * pq.second)
dmm.sample_timer = 1000 * pq.millisecond
def test_hp6632b_current_sense_range():
with expected_protocol(
ik.hp.HP6632b,
[
"SENS:CURR:RANGE?",
"SENS:CURR:RANGE {:e}".format(1)
] , [
"0.05"
]
) as psu:
unit_eq(psu.current_sense_range, 0.05*pq.amp)
psu.current_sense_range = 1 * pq.amp
def test_hp6632b_sense_sweep_interval():
with expected_protocol(
ik.hp.HP6632b,
[
"SENS:SWE:TINT?",
"SENS:SWE:TINT {:e}".format(1e-05)
] , [
"1.56e-05"
]
) as psu:
unit_eq(psu.sense_sweep_interval, 1.56e-05 * pq.second)
psu.sense_sweep_interval = 1e-05 * pq.second
def test_hp6632b_output_protection_delay():
with expected_protocol(
ik.hp.HP6632b,
[
"OUTP:PROT:DEL?",
"OUTP:PROT:DEL {:e}".format(5e-02)
] , [
"8e-02"
]
) as psu:
unit_eq(psu.output_protection_delay, 8e-02 * pq.second)
psu.output_protection_delay = 5e-02 * pq.second
def test_hp6632b_current_trigger():
with expected_protocol(
ik.hp.HP6632b,
[
"CURR:TRIG?",
"CURR:TRIG {:e}".format(0.1)
] , [
"1e-01"
]
) as psu:
unit_eq(psu.current_trigger, 0.1 * pq.amp)
psu.current_trigger = 0.1 * pq.amp
def test_hp6632b_voltage_trigger():
with expected_protocol(
ik.hp.HP6632b,
[
"VOLT:TRIG?",
"VOLT:TRIG {:e}".format(1)
] , [
"1e+0"
]
) as psu:
unit_eq(psu.voltage_trigger, 1 * pq.volt)
psu.voltage_trigger = 1 * pq.volt
def test_scpi_multimeter_trigger_delay():
with expected_protocol(
ik.generic_scpi.SCPIMultimeter,
[
"TRIG:DEL?",
"TRIG:DEL {:e}".format(1),
] , [
"+1",
]
) as dmm:
unit_eq(dmm.trigger_delay, 1 * pq.second)
dmm.trigger_delay = 1000 * pq.millisecond
def test_hp6632b_overvoltage():
with expected_protocol(
ik.hp.HP6632b,
[
"VOLT:PROT?",
"VOLT:PROT {:e}".format(1)
] , [
"10.0"
]
) as psu:
unit_eq(psu.overvoltage, 10*pq.volt)
psu.overvoltage = 1.0 * pq.volt
def test_agilent34410a_read():
with expected_protocol(
ik.agilent.Agilent34410a,
[
"CONF?",
"READ?"
] , [
"VOLT +1.000000E+01,+3.000000E-06",
"+1.86850000E-03"
]
) as dmm:
unit_eq(dmm.read(), +1.86850000E-03 * pq.volt)
def test_hp6632b_current():
with expected_protocol(
ik.hp.HP6632b,
[
"CURR?",
"CURR {:e}".format(1)
] , [
"10.0"
]
) as psu:
unit_eq(psu.current, 10*pq.amp)
psu.current = 1.0 * pq.amp
def test_agilent34410a_r():
with expected_protocol(
ik.agilent.Agilent34410a,
[
"CONF?",
"FORM:DATA REAL,64",
"R? 1"
] , [
"VOLT +1.000000E+01,+3.000000E-06",
"#18"+"3FF0000000000000".decode("hex")
]
) as dmm:
unit_eq(dmm.r(1), np.array([1]) * pq.volt)
def test_socketcomm_timeout():
comm = SocketCommunicator(socket.socket())
comm._conn = mock.MagicMock()
comm._conn.gettimeout.return_value = 1.234
unit_eq(comm.timeout, 1.234 * pq.second)
comm._conn.gettimeout.assert_called_with()
comm.timeout = 10
comm._conn.settimeout.assert_called_with(10)
comm.timeout = 1000 * pq.millisecond
comm._conn.settimeout.assert_called_with(1)
def test_agilent34410a_fetch():
with expected_protocol(
ik.agilent.Agilent34410a,
[
"CONF?",
"FETC?"
] , [
"VOLT +1.000000E+01,+3.000000E-06",
"+4.27150000E-03,5.27150000E-03"
]
) as dmm:
data = dmm.fetch()
unit_eq(data[0], 4.27150000E-03 * pq.volt)
unit_eq(data[1], 5.27150000E-03 * pq.volt)
def test_agilent34410a_read_data_nvmem():
with expected_protocol(
ik.agilent.Agilent34410a,
[
"CONF?",
"DATA:DATA? NVMEM",
] , [
"VOLT +1.000000E+01,+3.000000E-06",
"+4.27150000E-03,5.27150000E-03"
]
) as dmm:
data = dmm.read_data_NVMEM()
unit_eq(data[0], 4.27150000E-03 * pq.volt)
unit_eq(data[1], 5.27150000E-03 * pq.volt)
def test_usbtmccomm_timeout(mock_usbtmc):
comm = USBTMCCommunicator()
timeout = mock.PropertyMock(return_value=1)
type(comm._filelike).timeout = timeout
unit_eq(comm.timeout, 1 * pq.second)
timeout.assert_called_with()
comm.timeout = 10
timeout.assert_called_with(array(10000.0))
comm.timeout = 1000 * pq.millisecond
timeout.assert_called_with(array(1000.0))
def test_srsdg645_output_level():
"""
SRSDG645: Checks getting/setting unitful ouput level.
"""
with expected_protocol(ik.srs.SRSDG645,
[
"LAMP? 1",
"LAMP 1,4.0",
], [
"3.2"
]
) as ddg:
unit_eq(ddg.output['AB'].level_amplitude, pq.Quantity(3.2, "V"))
ddg.output['AB'].level_amplitude = 4.0
