def default(self, cmd, line, i):
"""Check for IRAF task calls and use CL emulation mode if needed
cmd = alpha-numeric string from beginning of line
line = full line (including cmd, preceding blanks, etc.)
i = index in line of first non-blank character following cmd
"""
if self.debug > 1: self.write('default: %s - %s\n' % (cmd, line[i:]))
if len(cmd) == 0:
if line[i:i + 1] == '!':
# '!' is shell escape
# handle it here only if cl emulation is turned off
if not self.clemulate:
iraf.clOscmd(line[i + 1:])
return ''
elif line[i:i + 1] != '?':
# leading '?' will be handled by CL code -- else this is Python
return line
elif self.clemulate == 0:
# if CL emulation is turned off then just return
return line
elif keyword.iskeyword(cmd) or \
(cmd in os.__builtins__ and cmd not in ['type', 'dir', 'help', 'set']):
# don't mess with Python keywords or built-in functions
# except allow 'type', 'dir, 'help' to be used in simple syntax
return line
elif line[i:i + 1] != "" and line[i] in '=,[':
# don't even try if it doesn't look like a procedure call
return line
elif not hasattr(iraf, cmd):
# not an IRAF command
#XXX Eventually want to improve error message for
#XXX case where user intended to use IRAF syntax but
#XXX forgot to load package
return line
elif self.isLocal(cmd):
# cmd is both a local variable and an IRAF task or procedure name
# figure out whether IRAF or CL syntax is intended from syntax
if line[i:i + 1] == "" or line[i] == "(":
return line
if line[i] not in string.digits and \
line[i] not in string.ascii_letters and \
line[i] not in "<>|":
# this does not look like an IRAF command
return line
# check for some Python operator keywords
mm = self.reword.match(line[i:])
if mm.group() in ["is", "in", "and", "or", "not"]:
return line
elif line[i:i + 1] == '(':
if cmd in ['type', 'dir', 'set']:
# assume a standalone call of Python type, dir functions
# rather than IRAF task
#XXX Use IRAF help function in every case (may want to
# change this eventually, when Python built-in help
# gets a bit better.)
return line
else:
# Not a local function, so user presumably intends to
# call IRAF task. Force Python mode but add the 'iraf.'
# string to the task name for convenience.
#XXX this find() may be improved with latest Python readline features
j = line.find(cmd)
return line[:j] + 'iraf.' + line[j:]
elif not callable(getattr(iraf, cmd)):
# variable from iraf module is not callable task (e.g.,
# yes, no, INDEF, etc.) -- add 'iraf.' so it can be used
# as a variable and execute as Python
j = line.find(cmd)
return line[:j] + 'iraf.' + line[j:]
# if we get to here then it looks like CL code
if self.debug > 1: self.write('CL: %s\n' % line)
try:
code = iraf.clExecute(line, locals=self.locals, mode='single')
if self.logfile is not None:
# log CL code as comment
cllines = line.split('\n')
for oneline in cllines:
self.logfile.write('# %s\n' % oneline)
self.logfile.write(code)
self.logfile.flush()
except:
self.showtraceback()
return ''
def default(self, cmd, line, i):
"""Check for IRAF task calls and use CL emulation mode if needed
cmd = alpha-numeric string from beginning of line
line = full line (including cmd, preceding blanks, etc.)
i = index in line of first non-blank character following cmd
"""
if self.debug>1: self.write('default: %s - %s\n' % (cmd,line[i:]))
if len(cmd)==0:
if line[i:i+1] == '!':
# '!' is shell escape
# handle it here only if cl emulation is turned off
if not self.clemulate:
iraf.clOscmd(line[i+1:])
return ''
elif line[i:i+1] != '?':
# leading '?' will be handled by CL code -- else this is Python
return line
elif self.clemulate == 0:
# if CL emulation is turned off then just return
return line
elif keyword.iskeyword(cmd) or \
(cmd in os.__builtins__ and cmd not in ['type', 'dir', 'help', 'set']):
# don't mess with Python keywords or built-in functions
# except allow 'type', 'dir, 'help' to be used in simple syntax
return line
elif line[i:i+1] != "" and line[i] in '=,[':
# don't even try if it doesn't look like a procedure call
return line
elif not hasattr(iraf,cmd):
# not an IRAF command
#XXX Eventually want to improve error message for
#XXX case where user intended to use IRAF syntax but
#XXX forgot to load package
return line
elif self.isLocal(cmd):
# cmd is both a local variable and an IRAF task or procedure name
# figure out whether IRAF or CL syntax is intended from syntax
if line[i:i+1] == "" or line[i] == "(":
return line
if line[i] not in string.digits and \
line[i] not in string.ascii_letters and \
line[i] not in "<>|":
# this does not look like an IRAF command
return line
# check for some Python operator keywords
mm = self.reword.match(line[i:])
if mm.group() in ["is","in","and","or","not"]:
return line
elif line[i:i+1] == '(':
if cmd in ['type', 'dir', 'set']:
# assume a standalone call of Python type, dir functions
# rather than IRAF task
#XXX Use IRAF help function in every case (may want to
# change this eventually, when Python built-in help
# gets a bit better.)
return line
else:
# Not a local function, so user presumably intends to
# call IRAF task. Force Python mode but add the 'iraf.'
# string to the task name for convenience.
#XXX this find() may be improved with latest Python readline features
j = line.find(cmd)
return line[:j] + 'iraf.' + line[j:]
elif not callable(getattr(iraf,cmd)):
# variable from iraf module is not callable task (e.g.,
# yes, no, INDEF, etc.) -- add 'iraf.' so it can be used
# as a variable and execute as Python
j = line.find(cmd)
return line[:j] + 'iraf.' + line[j:]
# if we get to here then it looks like CL code
if self.debug>1: self.write('CL: %s\n' % line)
try:
code = iraf.clExecute(line, locals=self.locals, mode='single')
if self.logfile is not None:
# log CL code as comment
cllines = line.split('\n')
for oneline in cllines:
self.logfile.write('# %s\n' % oneline)
self.logfile.write(code)
self.logfile.flush()
except:
self.showtraceback()
return ''
def executeClCommand(self):
"""Execute an arbitrary CL command"""
# pattern match to handle special commands that write to task
mcmd = _re_clcmd.match(self.msg)
if mcmd is None:
# general command
i = string.find(self.msg,"\n")
if i>=0:
cmd = self.msg[:i+1]
self.msg = self.msg[i+1:]
else:
cmd = self.msg
self.msg = ""
if not (string.find(cmd, IPCOUT) >= 0):
# normal case -- execute the CL script code
# redirect I/O (but don't use graphics status line)
iraf.clExecute(cmd, Stdout=self.default_stdout,
Stdin=self.default_stdin, Stderr=self.default_stderr)
else:
#
# Bizzaro protocol -- redirection to file with special
# name given by IPCOUT causes output to be written back
# to subprocess instead of to stdout.
#
# I think this only occurs one place in the entire system
# (in clio/clepset.x) so I'm not trying to handle it robustly.
# Just raise an exception if it does not fit my preconceptions.
#
ll = -(len(IPCOUT)+3)
if cmd[ll:] != "> %s\n" % IPCOUT:
raise IrafProcessError(
"Error: cannot understand IPCOUT syntax in `%s'"
% (cmd,))
sys.stdout.flush()
# strip the redirection off and capture output of command
buffer = cStringIO.StringIO()
# redirect other I/O (but don't use graphics status line)
iraf.clExecute(cmd[:ll]+"\n", Stdout=buffer,
Stdin=self.default_stdin, Stderr=self.default_stderr)
# send it off to the task with special flag line at end
buffer.write(IPCDONEMSG)
self.writeString(buffer.getvalue())
buffer.close()
elif mcmd.group('stty'):
# terminal window size
if self.stdoutIsatty:
nlines, ncols = wutil.getTermWindowSize()
else:
# a kluge -- if self.stdout is not a tty, assume it is a
# file and give a large number for the number of lines
nlines, ncols = 100000, 80
self.writeString('set ttynlines=%d\nset ttyncols=%d\n' %
(nlines, ncols))
self.msg = self.msg[mcmd.end():]
elif mcmd.group('curpack'):
# current package request
self.writeString(iraf.curpack() + '\n')
self.msg = self.msg[mcmd.end():]
elif mcmd.group('sysescape'):
# OS escape
tmsg = mcmd.group('sys_cmd')
# use my version of system command so redirection works
sysstatus = iraf.clOscmd(tmsg, Stdin=self.stdin,
Stdout=self.stdout, Stderr=self.stderr)
self.writeString(str(sysstatus)+"\n")
self.msg = self.msg[mcmd.end():]
# self.stdout.write(self.msg + "\n")
else:
# should never get here
raise RuntimeError(
"Program bug: uninterpreted message `%s'"
% (self.msg,))